Installation and Operating Instructions
Desktop Theater 5.1 DTT2500 Digital
Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission
of Creative Technology Ltd. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of
the license agreement. It is against the law to copy the software on any other medium except as specifically allowed in the license agreement. The licensee may make one
copy of the software for backup purposes.
Copyright © 1999 Creative Technology Ltd. All rights reserved.
© 1999 Cambridge SoundWorks, Inc. All rights reserved. Cambridge SoundWorks is a registered trademark, and PCWorks and DeskTop Theater are trademarks of
Cambridge SoundWorks, Inc., Newton, MA. The Creative logo and Sound Blaster logo are registered trademarks and the Environmental Audio logo and Creative Multi
Speaker Surround are trademarks of Creative Technology Ltd. The Desktop Theater 5.1 DTT2500 Digital Dolby Digital Decoder Amplifier is manufactured under the
license from Dolby Laboratories. “Dolby”, “Pro Logic”, “AC-3”, and the Double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
Copyright 1992-1997 Dolby Laboratories, Inc. All rights reserved. Microsoft and DirectSound are registered trademarks of Microsoft Inc. All other brands and product
names are trademarks or registered trademarks of their respective holders. All specifications are subject to change without prior notice. Actual contents may differ slightly
from those pictured.
Version 1.0
July 1999
Trademarks
Sound Blaster is a registered trademark, and Blaster is a trademark of Creative Technology Ltd.
Intel and Pentium are registered trademarks of Intel Corporation.
Microsoft, MS-DOS, Windows, and the Windows logo are registered trademarks of Microsoft Corporation.
All other products are trademarks or registered trademarks of their respective owners.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS - All safety and oper-
ating instructions should be read before the
DTT2500 Digital amplified subwoofer/sat-
ellite system is operated.
RETAIN INSTRUCTIONS - The safety and
operating instructions should be retained
for future reference.
HEED WARNINGS - All warnings on the
subwoofer and in the operating instruc-
tions should be adhered to.
FOLLOW INSTRUCTIONS - All operating
and use instructions should be followed.
CLEANING - Unplug the Power Supply
Adapterfromthewalloutletorotherpower
source before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
ATTACHMENTS - Do not use attachments
not recommended by Cambridge
SoundWorks as they may cause hazards.
WATER AND MOISTURE - Do not use the
Decoder Amplifier near water—for ex-
ample, nearabathtub, washbowl, kitchen
sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
ACCESSORIES - Do not place the DTT2500
Digital Decoder Amplifier on an unstable
cart, stand, tripod, bracket, or table. The
Decoder Amplifier may fall, causing seri-
ous injury to a child or adult, and serious
damage to the product. Use only with a
cart, stand, tripod, bracket, or table rec-
ommended by Cambridge Sound-Works,
or sold with the product. Any mounting of
the satellites or subwoofer should follow
the manufacturer’s instructions, and
should use a mounting accessory recom-
mended by Cambridge SoundWorks.
VENTILATION - Slots and openings in the
Decoder Amplifier are provided for venti-
lation and to ensure reliable operation of
the Decoder Amplifier and to prevent it
from overheating. These openings must
not be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other simi-
lar surface. The Decoder Amplifier should
not be placed in a built-in installation such
as a bookcase or rack unless proper ven-
tilation is provided or Cambridge
SoundWorks’ instructions have been ad-
hered to.
HEAT - The Decoder Amplifier should be
situated away from heat sources such as
radiators, heatregisters, stoves, andother
products (including amplifiers) that pro-
duce heat.
POWER SOURCES - The Decoder Amplifier
should be operated only from the type of
power source indicated on the marking
label. If you are not sure of the type of
power supply to your home, consult your
product dealer or local power company.
For products intended to operate from
battery power, or other sources, refer to
the operating instructions.
the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
DAMAGE REQUIRING SERVICE - Unplug
the power supply from the wall outlet or
other power source and refer servicing to
qualified service personnel under the fol-
lowing conditions:
a) When the power supply cord or plug is
damaged.
b) If liquid has been spilled, or objects
have fallen into the subwoofer.
c) If the Decoder Amplifier has been ex-
posed to rain or water.
d) If the subwoofer does not operate nor-
mally by following the operating instruc-
tions; or exhibits a distinct change in per-
formance.
POWER-CORD PROTECTION - Power sup-
ply cords should be routed so that they are
not likely to be walked on or pinched by
items placed upon or against them, paying
particular attention to cords at plugs, con-
venience receptacles, and the point where
they exit from the Decoder Amplifier.
LIGHTNING - For added protection for the
DTT2500 Digital system during a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug it
from the wall outlet. This will prevent dam-
age to the Decoder Amplifier due to light-
ning and power-line surges.
OVERLOADING - Do not overload wall out-
lets, extension cords, or integral conve-
nience receptacles as this can result in a
risk of fire or electric shock.
OBJECT AND LIQUID ENTRY - Never push
objects of any kind into the Decoder Am-
plifierthroughopeningsastheymaytouch
dangerousvoltagepointsorshortoutparts
that could result in a fire or electric shock.
Never spill liquid of any kind on the speak-
ers or the Decoder Amplifier.
e) If the product has been dropped or
damaged in any way.
REPLACEMENT PARTS - When replace-
ment parts are required, be sure the ser-
vice technician has used replacement
partsspecifiedbyCambridgeSoundWorks
or have the same characteristics as the
original parts. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK - Upon completion of any
service or repairs to the DTT2500 Digital
system, ask the service technician to per-
form safety checks to determine that the
DeskTop Theater 5.1 system is in proper
operating condition.
POLARIZATION - The power supply may be
equipped with a polarized alternating-cur-
rent line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a
safety feature. If you are unable to insert
SERVICING - Do not attempt to service the
any part of the DTT2500 Digital yourself
as opening or removing covers may ex-
pose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.
WALL OR CEILING MOUNTING - The
DTT2500 Digital satellites should be
mounted to a wall or ceiling only as rec-
ommended by Cambridge SoundWorks.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety & Regulatory Information ......................................................................... 2
Compliance ........................................................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS ......................................................... 2
DTT2500 Digital .................................................................................................. 4
Introduction .......................................................................................................... 5
Inspecting ............................................................................................................. 6
Important Notes .................................................................................................... 6
Installation Sequence ............................................................................................ 7
Speaker Placement ............................................................................................... 7
Speaker Wire and Stand Installation .................................................................. 10
Mounting The Speakers ...................................................................................... 11
Decoder Amplifier .............................................................................................. 12
Making Connections........................................................................................... 12
Wiring Diagram .................................................................................................. 13
Connection to Sound Blaster .............................................................................. 13
Decoder Amplifier Functions ............................................................................. 14
Surround Reference ............................................................................................ 16
Dolby Digital ...................................................................................................... 16
Dolby Pro Logic ................................................................................................. 16
Creative Multi Speaker Surround (CMSS) ........................................................ 17
Audio Mode Selection ........................................................................................ 17
Applications Guide ............................................................................................. 18
Specifications ..................................................................................................... 22
Important ............................................................................................................ 22
Creative European Help Line ............................................................................. 23
DeskTop Theatre™ 5.1
DTT2500 Digital
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
hank you for purchasing
DeskTop Theater 5.1
DTT2500 Digital by
T
Cambridge SoundWorks.
DeskTop Theater 5.1 DTT2500 Digital
lets you experience the full potential
of Dolby® Digital multichannel sound
from your computer DVD player, with
a dynamic output that rivals a
component home theater system. It
processes both Dolby Digital and
Dolby Surround program material.
DeskTop Theater 5.1 DTT2500
Digital offers discreet four-channel
support for Microsoft® DirectSound® 3D
and its other derivatives. In some of
today’s best CD-based action games,
DeskTop Theater 5.1 DTT2500 Digital
can automatically decode the Dolby
Surround cut-scenes while offering
enveloping positional four channel
audio. It’s ready for the new era of
DVD-based games.
Also included is Creative Multi
Speaker Surround, which lets you hear
all of your favourite stereo program
material with a new and exciting
three-dimensional quality.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Notes
Inspecting
These instructions assume you have
a DVD player with a coaxial Dolby
Digital (AC-3) output (for example, the
Creative Labs PC-DVD Encore).
These instructions also assume your
sound card supports processing of
DirectSound®3D, including front and
rear two-channel minijack line outputs
(like Creative Labs Sound Blaster PCI
series or Sound Blaster Live! series).
Sound Blaster Live! owners should
utilize the exclusive Digital DIN
connection, to hear the clearest digital
audio available. Conventional 2-
channel sound cards such as Sound
Blaster 16 or the Sound Blaster AWE
series can also be used with DTT2500
Digital, but these cards will not
provide rear channel output when
playing games using DirectSound®3D
or its derivatives.
(16 feet) long. Typically, the two
satellites with the longer cables will be
used on the surround channels, but the
satellites are otherwise identical. If
you need extra cable length for the
front channel satellites, use the pair
with the longer cables instead.
For Damage
Examine each unit carefully for signs of
shipping damage. If there is any damage, do
not install the system. Consult the store
where you purchased the system or call the
appropriate Creative Technology, Ltd.
support group at the number listed at the
end of this publication. Save the shipping
carton and inserts in case you have to
transport the system later.
All the speakers are magnetically
shielded, but the subwoofer is not.
One pair of satellites has cables that
are 3 meters (9 feet) long. The other
pair has cables that are 5 meters
All the items shown in the illustration
should be included. If anything is missing,
notify the retailer.
Holder/Cap (2)
Satellites (5)
3 meter speaker wires (4)
PRO LOGIC
D
D
O
L
L
B
Y
A
MUSI
MOVI
FOURPOIN STEREO
I
G
I
T
DIGITAL IN ANALOG IN LL
R
CREATIVE
MULTI SPEAKER
DOLBY
AUDIO
SPEAKER
MUT
Supports (3)
Feet (3)
POWER
MASTE
CENTE
SUBWOOFE
SURROUND
DTT 3500 DIGITAL
(5) Wall Mounting Hardware
Quick Reference Guide
Decoder Amplifier
5 meter speaker wires (2)
Strips of 4 feet (5)
SPDIF DIN Cable
C
R
R S
L
L S
S U B
Tandem Audio Cable (Green and Black Miniplugs)
SUB
Frames (2)
RS
C
R
LS
L
Monitor Stand
Desktop Stands for satellites (5)
Support Extends (18)
SPDIF Cable (RCA to RCA)
Hook and Loop Fasteners (10)
Satellite Position Stickers
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Sequence
Speaker Placement
1. Read all of the instructions before
installing the speaker system.
2. Using the placement instructions as
a guide, position the satellites, the
center channel speaker and
The Front Satellites. The left front
and right front satellites play stereo
music, the off-screen sounds of
video playback and the front
channels of four channel games.
These satellites should be placed
to the sides of your monitor (see
Diagram A). Be sure to have a clear
line of sight from your listening
position to these satellites. The
satellites intended for front
The satellites may also be hung on the
wall behind the monitor using the screw
and wall anchors provided (see
6. With the Decoder Amplifier’s
power switch “off”, connect the
power supply adaptor to the
Decoder Amplifier.
Mounting The Speakers, page 11).
If you wish to save desktop space,
use the hook and loop fasteners to
attach the satellite speakers to the sides
of the computer monitor (see Diagram B).
7. Turn on the power. Use the
SPEAKER TEST mode to position
and balance the speakers.
8. You may wish to experiment with
speaker placement briefly before
concealing the connecting cables
and making the installation more
permanent.
9. The unit is ready for you to enjoy.
Refer to the Quick Reference guide
for information about settings for
specific program sources like DVD,
CDs, Video CD and games.
subwoofer around your computer.
Install the Desktop Stands and
Floor Stands as appropriate. If you
wish to substitute a powered
subwoofer for the subwoofer that
comes with the DTT2500 Digital,
read Substituting a powered
subwoofer page 9.
The Center Channel Speaker. The
center channel speaker provides the on-
screen effects and dialog in Dolby
Digital, Dolby Surround or Creative
Multi Speaker Surround modes. It
should be placed as close to the center
of your computer monitor as possible.
placement have 3 meters (9 feet) of
cable.
Install the satellite’s Desktop
Stands when using them on the
desktop (see page 10).
3. Connect the satellite speakers,
center channel speaker, and
subwoofer to the back of the
Decoder Amplifier.
4. Connect the Dolby Digital output
of your digital program source
(typically a DVD player) to the
Dolby Digital input of the Decoder
Amplifier.
5. Connect your normal audio signal
sources via the Line In and Rear In
inputs. An owner of a Sound
Blaster Live! sound card with a
Digital DIN output should use the
supplied cable to connect it to the
Digital DIN input instead.
A
B
PRO
D
OL
MU
M
O
F
O
U
R
P
S
T
E
R
E
DIGITA
ANALO
L
R
B
Y
CREATIVE
DOLBY
MAST
AUDIO
CENT
SPEAKE
MU
POWE
SUBWOOF
RRO
DTT 3500 DIGITAL
7
Download from Www.Somanuals.com. All Manuals Search And Download.
There are many mounting
Diagram D). Position the face of the
center channel so that it is as far
forward as possible.
The Rear Satellites. The rear
satellites provide the surround
effects in Dolby Digital, Dolby
Surround and Creative Multi
Speaker Surround modes. They also
provide the discreet rear sounds
produced in four channel gaming.
5 meters (16 feet) of cable is
provided with the two remaining small
satellites for more flexibility in rear
channel placement.
The rear satellites may be placed in
any convenient sites alongside the
listener, including sites slightly
forward of the listening location.
The rear satellites do not have to be
at exactly the same height, nor at the
same height as the front satellites.
If you have side walls close to your
listening position, excellent placement
for the rear satellites is slightly behind
your listening position, slightly above
ear level (see Diagram F). The
satellites may be hung on the wall
using the screw and wall anchors
provided (see Mounting The
Speakers page 11).
possibilities. The monitor stand can
be attached with hook and loop
fasteners to the top of the computer
monitor. It directs the sound down
towards the listener (see Diagram C).
If your computer monitor’s
construction directs the sound of the
center channel satellite towards you
without a stand, attach the satellite
directly to the top of the monitor,
using the hook and loop fasteners (see
Use a Desktop Stand to position a
center channel satellite in front of the
monitor. It directs the sound up
towards the listener (see Diagram E).
The Center Speaker may also be
hung on the wall behind the monitor
using the screw and wall anchors
provided (see Mounting The
Speakers, page 11).
Do not be concerned if this
placement is not practical. Any rear
satellite placement to the left and right
side of the listening position will
provide strong directional and
surround effects.
C
D
E
G
F
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Also, you may attach the rear
satellites under a desktop or at the
sides of a desk using the hook and
loop fasteners (see Diagram I).
After you have positioned the rear
satellites, use the test sound to make
sure each speaker can be heard
clearly.
The Subwoofer. The subwoofer’s
optimum position is on the floor
against the wall under the computer
desk. The nearer the subwoofer is to
the corner of the room, the stronger
its maximum bass output will be. We
strongly recommend placing the
subwoofer on the floor (see Diagram J).
Leave at least 8 cm (3 inches) of
space between the subwoofer face
and a wall. Small objects in front of,
but not touching the subwoofer (table
legs, for instance) will have no effect
on its sound. If you have no available
floor space, the subwoofer can be
placed on a shelf, desktop or other
sites, but its maximum output will be
reduced. The subwoofer is not
The rear satellites may be installed on
their convenient floor stands. While
listening, the stands should be positioned
to the left and right of your listening
position (see Diagram G on the
previous page).
The Floor Stands are small enough
to be stowed underneath a desk when
not in use. See page 11 for floor stand
assembly instructions.
Larger work surfaces can accommo-
date both front and surround pairs of
satellites on their Desktop Stands. Try
the extreme corners of a desk using the
Desktop Stands (see Diagram H).
Substituting a powered
subwoofer. You may substitute a
powered subwoofer for the subwoofer
that comes with the DTT2500 Digital.
Connect its line level input (typically
an RCA jack) to the dedicated
subwoofer output on the back of the
Decoder Amplifier, using a shielded
audio cable with RCA plugs on each
end. Refer to the powered
subwoofer’s User Manual for
adjustment procedures.
magnetically shielded, so position it
at least 18 inches away from a
computer monitor.
H
I
J
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Wire and Stand Installation
Typically, the 3 meter speaker
cables will connect the front and
center satellites to the Decoder
Amplifier and the 5 meter cables
will connect the rear satellites to
the Decoder Amplifier. A panel of
twelve self-adhesive labels is
Diagram K: To connect the speaker
wire to each satellite, press one of the
spring-loaded tabs to expose the
connection hole. Insert the bare end of
the wire into the exposed hole, then
release the tab to lock the wire in place.
Connect wires with red bands to red tab
connectors, and unmarked wires to
black tab connectors.
3. Remove the backing from the
remaining, longer “L” label and wrap
it around the opposite end of the
speaker cable near the RCA-type plug.
4. Place the satellite in the front left
position.
5. Repeat this process using another 3
meter cable for the front right satellite,
using the “R” labels.
L
C
provided to identify each satellite
and subwoofer and the opposite
end of the cable connected to a
satellite and subwoofer.
SUB
RS
LS
R
6. Connect another 3 meter cable to a
satellite. Use the “C” (center) labels.
If used, the Monitor Stand attaches to
the satellite in the same manner as the
Desktop Stands, although it does not
have a hole for the speaker wire.
Route the wire to the left or right side
of the attachment strut. Position the
satellite.
Notes: Matching red wires to red
tabs and unmarked wires to black
tabs insures the speakers all play “in
phase”. “Out-of-phase” connections
will do no electrical harm, but the
overall sound quality will be greatly
reduced. You can substitute regular
18 gauge speaker wire to create
longer cables, if needed.
K
1. Identify a 3 meter cable. Most
often, a satellite will be used with a
desktop stand. In this case, thread
the bare wire end of a 3 meter cable
through the hole in the desktop
stand. Connect this end to a
satellite (as shown in Diagram K).
Carefully insert the desktop stand’s 7. If you wish to use the Floor Stands
attachment arm into the socket in
the back of the satellite, taking up
any slack in the cable as required.
2. To use this satellite in the front left
position, remove the backing from
the small, round “L” label and
apply it to the back of the satellite
(see Diagram K).
with the rear satellites, assemble the
stand according to Attaching The
Floor Stand instructions on page 11.
Use the RS and LS labels (right and
left surround) and 5 meter cables.
8. Connect the subwoofer using the last 3
meter cable to the “SUB” labels.
DOLBY DIGITAL
(AC-3) SPDIF IN
LINE IN REAR IN DIGITAL ANALOG
DIN
AUTO
INPUT
15V
DC IN
SPEAKER OUTPUTS
SUBWOOFER RS LS
C
R
L
L
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting The Speakers
Plastic anchors may be needed to
Screw Mounting: The Satellite and
Center Channel speakers may be
hung on a wall using an M5 screw
and their keyhole openings.
First attach four self-adhesive feet
to the back of each satellite (see
Diagram L) insuring a vibration-free,
secure installation. Leave about 3/8 of
an inch of the screw-head exposed to
fit into the back of the speaker.
secure the screws into particularly
hard or soft material. If so, drill the
appropriate sized holes in the wall
and tap the anchors into the holes
until they are flush with the wall.
Insert the screws into the anchors
until they protrude 3/8 inch from the
wall.
L
P
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Connections
Decoder Amplifier
Placement
Consult the Wiring Diagram on
the next page before making any
connections.
end). It is not necessary to connect
Hook and Loop Fasteners: When
mounting speakers with hook and
loop fasteners, make sure that all
surfaces are clean and free of dirt
and grease. Hard, flat, unpainted
surfaces work best with hook and
loop fasteners (see Diagram M).
Attach the fastener first to a
a cable to the Line In and Rear In
input in this instance. Refer to
Connection to Sound Blaster Live!
via Digital DIN (next page) for
more information about this
connection.
The Decoder Amplifier can be placed on
the desktop, a shelf or any site that makes
the controls convenient (see Diagram N).
The Power Adapter cord must be
able to reach from the Decoder Amplifier
back panel to your AC power receptacle.
Place the Decoder Amplifier on a hard,
flat surface.
Speaker Connections. Insert one
satellite’s plug into the correspond-
ing Speaker Output on the Decoder
Amplifier. Repeat this process for
the remaining satellites and
subwoofer. If substituting a
powered subwoofer, connect it to
the SUBWOOFER LINE OUT.
For all other sound cards: Use the
tandem audio signal cable. Connect
the green stereo miniplugs to the
Line Out minijack output of your
sound card and to the Line In
minijack output of the Decoder
Amplifier. Connect the black stereo
miniplugs to the Rear Out minijack
output of your sound card (if
speaker. Then remove the
remaining backing and adhere to
the chosen surface.
There are ventilation slots on the bottom
and top of the Decoder Amplifier’s
enclosure. Don’t block the ventilation slots
by placing material on top of or below the
DecoderAmplifier.
Signal Connections.
Dolby Digital. Connect the Dolby
Digital/SPDIF output of your
signal source to the Decoder
Amplifier’s Dolby Digital input
using the cable with the RCA
plugs at each end.
present) and to the Rear In minijack
input of the Decoder Amplifier.
M
Power Supply Adapter Connec-
tions. Confirm the power switch is
in the “OFF” position. Insert the
power supply’s AC plug into an
appropriate receptacle. Insert the
small DC connector into the “15V
DC IN” receptacle on the back of
the Decoder Amplifier.
For Sound Blaster Live! sound
cards with a digital I/O card:
Connect its Digital DIN output to
the Digital DIN input with the
supplied Digital DIN cable (the
one with the red plugs at each
N
PRO
PRO
D
OL
D
OL
MU
M
O
F
O
U
R
P
S
T
E
R
E
DIGITA
ANALO
L
R
MU
M
O
F
O
U
R
P
S
T
E
R
E
DIGITA
ANALO
L
R
B
Y
BY
CREATIVE
DOLBY
MAST
AUDIO
CENT
SPEAKE
MU
CREATIVE
DOLBY
MAST
AUDIO
CENT
SPEAKE
MU
POWE
POWE
SUBWOO
SURROU
SUBWOOF
SURROU
DTT 3500 DIGITAL
DTT 3500 DIGITAL
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to Sound Blaster
Live! via Digital DIN
Wiring Diagram
DVD OUTPUT
SOUNDCARD OUTPUT
(EXAMPLE: CREATIVE LABS
PC-DVD ENCORE Dxr2)
(EXAMPLE: SOUND BLASTER LIVE!)
DIGITAL
OUTPUT
REAR LINE
OUT
OUT
If your Sound Blaster Live! sound
card includes a Digital I/O card,
you can take advantage of the
clear, distortion-free audio
• Bring your mouse pointer to the top
of the monitor screen to display the
Creative Launcher.
• Click on AudioHQ.
available from its Digital DIN
output.
• Click on the Speaker tab.
The speaker dialog box will appear.
• On the configuration tabbed page,
select the “4 Speakers” option.
• A sofa icon (representing you)
appears in the center of the preview
box, with four speakers at the corners
of the box.
• In some versions of Sound Blaster
Live! software, you can select the
“four-speaker” output option in the
Environment deck of the Surround
Mixer application (located in the
Sound Blaster Live! program tab of
the Creative Launcher).
1. Insert on end of the SPDIF cable
into the Digital DIN output jack
on the Sound Blaster Live! Digital
I/O card. The position of the
Digital DIN connector on the
Digital I/O card may be different
from this diagram. The Digital
DIN connector is the only
connector with a 9-pin configura-
tion.
2. Insert the other end of the SPDIF
cable into the Digital DIN input
on the decoder amplifier.
DOLBY DIGITAL
(AC-3) SPDIF IN
LINE IN REAR IN DIGITAL ANALOG
DIN
AUTO
INPUT
15V
DC IN
SPEAKER OUTPUTS
LS
C
SUBWOOFER RS
R
L
POWER
SUPPLY
ADAPTER
3. Use the following procedure to
configure the Sound Blaster Live!
sound card for four speakers:
Note: When the Analog/Auto switch is
pushed towards the Auto side, the
signal at the Digital DIN input is given
priority and the signal at the Analog
Audio inputs will be ignored. To listen
to a sound source through the analog
audio inputs, push the switch to the
Analog side.
RIGHT SURROUND
SATELLITE
LEFT SURROUND
SATELLITE
SUBWOOFER
SPDIF CABLE
DOLBY DIGITAL
(AC-3) SPDIF IN
LINE IN REAR IN DIGITAL ANALOG
DIN
AUTO
DIGITAL I/O CARD DIGITAL DIN Digital DIN Connector
INPUT
15V
DC IN
SPEAKER OUTPUTS
LS
C
SUBWOOFER RS
R
L
RIGHT SATELLITE
CENTER CHANNEL
SPEAKER
LEFT SATELLITE
DTT2500 Digital Decoder Amplifier
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Decoder Amplifier Functions
No lights illuminated: Mutes any
analog stereo or CMSS output. Use
this setting if you wish to play an
analog stereo signal through the
Dolby Pro Logic processor.
For more information about
Creative Multi Speaker Sur-
round, see page 17.
When the power is switched
Top Row
has different languages on the left
and right channels.
Repeated presses of the button
selects which channel is fed to both
the Left and Right front speakers.
LL-Left channel to both Left and
Right front speakers.
RR-Right channel program to both
Left and Right front speakers. See
Audio Mode Selection, page 17
for further information about this
feature.
“ON”, the green indicator lights on
4. Creative Multi Speaker
Surround: CMSS processes analog
program material. Repeated presses
of this button steps through five
different operation modes.
Music: Creates a 5.1 speaker
soundfield appropriate for music
from any analog sound source.
Movie: Creates a 5.1 speaker
soundfield appropriate for movie or
game enjoyment from an analog
sound source.
FourPoint: Use this mode for DVD
games having Dolby Digital
soundtracks with Environmental
Audio Extensions or Microsoft®
DirectSound®3D for real-time
positioning of sound effects.
Stereo: Use this mode when you
want to hear just stereo effects or
the stereo Dolby Digital downmix
of a DVD.
the face of the Decoder Amplifier
will sequentially light from the left
to the right. The CMSS Music light
will remain illuminated after start-
up. The indicator light for Dolby
Digital will illuminate automatically
if a Dolby Digital program is
playing.
5. Dolby Digital indicator light:
This light turns on whenever a
Dolby Digital signal is detected at
the SPDIF input of the DTT2500
Digital. For Dolby Digital 5.1
sound reproduction, make sure only
this light is illuminated.
1. ON/OFF: Switches DeskTop
Theater DTT2500 Digital power on
and off.
An indicator light signals the power
is on.
8. Speaker Test: Press this button
to start the “test sound” generator.
Use this test sound to position all
the speakers and to balance their
relative output.
The test sound moves in sequence
from the left satellite, the center
speaker, the right satellite, then to
the right surround satellite, left
surround satellite and the
subwoofer. All of the indicator
lights will blink on and off while
the test sound generator is in
operation.
The test sound will operate for
three complete cycles and then stop.
You can terminate the sound at any
point by pressing the Speaker Test
button again.
6. Dolby Surround: This button
cycles between Dolby Pro Logic
processing of the digital signal,
then the analog input and no Pro
Logic processing. Dolby Surround:
This button cycles between Dolby
Pro Logic processing of the digital
signal, then the analog input and no
Pro Logic processing. To decode
Dolby surround program material
at the Digital DIN input, select the
Analog Pro Logic mode.
2. Master: Adjusts the volume of
the entire system.
3. Center, Subwoofer and
Surround: These controls adjust the
level of the indicated channels. Their
output level should be balanced with
the fixed output level of the Left and
Right front speakers.
A Quick Reference Guide
is provided separately.
Consult this guide for
advice about playing
7. Audio Mode: Use this button to
play just the left or right channels
of a stereo digital signal (PCM
from an audio CD, a Video CD or a
stereo signal from a DVD). Use
this when, for example, a Video CD
different program sources.
First use the test sound to verify
that each speaker is operating.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Then make sure the speakers are
positioned so that the test sound can
be clearly heard.
Finally, adjust the front panel level
controls for the center, subwoofer and
rear speakers. Adjust each control so
its speaker achieves a balanced
output level with the left and right
satellites (which provide a fixed
“reference” output level).
All Decoder Amplifier functions
except for the level controls are
disabled while the test sound is
running.
The speaker level controls operate at
all times. If desired, you may adjust
these controls during program material
to fine-tune the balance.
9. Mute: Mutes all output from the
DTT2500 Digital. Press the button once
to mute. Press a second time to restore
audio output.
The CMSS, Dolby Surround, Audio
Mode and Speaker Test buttons are
operable during mute.
PRO LOGIC
DOLBY
MUSIC
MOVIE FOURPOINT STEREO
DIGITAL
LL
R
DIGITAL IN ANALOG IN
5
4
6
7
8
9
SPEAKERTEST
CREATIVE
MULTI SPEAKER SURROUND
DOLBY SURROUND
AUDIO MODE
MUTE
POWER
C
AMBRIDGE
SUBWOOFER
MASTER
CENTER
SURROUND
S
OUNDWORKS
2
1
3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround Reference
Dolby Digital
Dolby Pro Logic
CD-ROMs and CD’s with Dolby
Surround encoding will feature
the Dolby Surround logo at the
beginning of the program or on the
packaging. Process these programs
by making sure all CMSS indicator
lights are off and selecting the Pro
Logic Analog Input setting of the
Surround Mode button. CD-ROM’s
and CD’s with Dolby Surround
encoding will feature the Dolby
Surround logo at the beginning of
the program or on the packaging.
Process these programs by
making sure all CMSS indicator
lights are off and selecting the Pro
Logic Analog Input setting of the
Support Mode button. Using this
Analog Pro Logic Mode to decode
Dolby Surround program materia;
at the Digital DIN input.
Dolby Digital (earlier called AC-3)
Dolby Surround is an earlier
When listening to DVD movies with
5.1 channel Dolby Digital sound, be
sure to listen only to the digital program
source. You can insure this by:
1. making sure your DVD
delivers five discreet full-range
channels (left front, center, right front,
left surround and right surround) plus a
separate Low Frequency Effects (LFE)
channel.
surround sound standard which is
decoded with a Pro Logic processor in
the DTT2500 Digital. The Pro Logic
steering circuitry derives separate
center and rear channels from encoded
stereo program sources.
Pro Logic processing provides a
convincing movie soundfield when the
material is specifically encoded for
Dolby Surround. Most older stereo
movie soundtracks will only be
encoded for Dolby Surround, even
though the program source may be a
DVD’s digital output. Most DVDs
containing Dolby Surround program
material will cause both the Dolby
Digital and Digital Pro Logic lights to
illuminate. DTT2500 Digital will
decode these digitally transferred
Dolby Surround programs through the
digital Pro Logic decoder automatically.
player’s stereo downmix is
Many soundtracks on the latest
generation laser discs, DVDs and High
Definition Television (HDTV), are
encoded with Dolby Digital technol-
ogy.
not sent to your soundcard. For
example, disconnect any cable
link between the cards.
2. making sure all four CMSS
indicator lights are off
When a 5.1 channel Dolby Digital
program source is playing, such as
from a Creative PC-DVD player, the
Dolby Digital indicator light will
illuminate automatically.
(MUSIC, MOVIE,FOURPOINT
and STEREO)
3. muting the “CD” input of
your computer’s software mixer/
volume control application.
Note: Not every section of a DVD
will be 5.1-channel encoded. On many
DVDs, only the main movie program
will be available in 5.1 channel sound.
Other supporting chapters (like a
“Director’s Comment” section) may be
in stereo or mono. These sections will
not light the Dolby Digital indicator
even though the sound will be properly
reproduced by the DTT2500 Digital.
When playing a DVD game with a
mix of Dolby Digital 5.1 sound (a
digital signal at the SPDIF input) and
soundcard wavetable output (a signal at
the analog input), be sure to engage the
FOURPOINT mode in the CMSS settings.
Do not select a Pro Logic decoding
mode if the program material is not
encoded for Dolby Surround.
Excessive center channel output will
result, and most stereo effect will be
lost. Use CMSS “Movie” or “Music”
modes to upmix stereo programs to a
realistic 5.1 channel sound field.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Multi Speaker
Surround (CMSS)
Audio Mode Selection
The Audio Mode selection feature
can only be used with the PCM digital
soundtrack of a Video CD or DVD
with a stereo soundtrack, not a DVD
encoded with Dolby Digital 5.1 sound
or Dolby Surround-encoded material.
If you have an analog program with
separate left and right channels (the
analog output of a CD ROM, or the
analog stereo output of a “software”
video CD, for instance), you will have
to use the balance control in your PC’s
audio software to mute the undesired
channel.
The stereo soundtracks of some
movies on the Video CD (VCD
CMSS is a 2-channel to 5.1-channel
sound processor similar in some aspects
to a Dolby Surround with Pro Logic
processor.
Unlike Pro Logic decoding, CMSS
Music, Movie and Four Point modes
are appropriate for use with multi-
coded sources such as DVD games. In
some game titles, the movie sequences
may be encoded in Dolby Surround
but the game sequences may be in the
WAV format. CMSS Movie mode
supports 6-channel output for .WAV,
.AVI, .MIDI and other audio software
formats. Few, if any of these kinds of
formats are Dolby Surround encoded.
The FOURPOINT mode passes the
four discreet channel audio of four-
channel games direct to each satellite
channel. It does not synthesize rear
channel output, so stereo signal in this
mode will play just through the front
two speakers and subwoofer.
format) contain different languages.
For example, a two channel soundtrack
may contain Mandarin on the right
channel and English on the left
channel. The VCD program literature
should indicate the presence of dual-
language soundtracks. Similarly, some
movies in the DVD format will contain
dual-language soundtracks. DTT2500
Digital lets you select one of these
languages and play it through both the
Left and Right speakers.
If there is no indication of which
channel is which and you hear two
different language soundtracks during
stereo playback, select the “LL” and
“RR” settings until you find the
CMSS Music mode creates a
convincing 5.1 channel surround
soundfield with typical stereo sources,
whether they are Dolby Surround-
encoded or not. It works well with Dolby
Pro Logic, WAVE, AVI and MIDI
program material. In essence, CMSS
Music mode puts you “on the stage”
for the music’s performance, surround-
ing you with the performers.
In a similar manner, CMSS Movie
mode provides the sonic impression of
being front and center at a movie
screening. Dialog and all normally
centered sounds from a stereo program
are heard through the center speaker. Use
this mode whenever a music program has
sounds you want to blend with on-screen
action or dialog.
language soundtrack you want.
The STEREO mode plays the Left
and Right Front speakers and the
subwoofer. It also lets you hear the
stereo downmix from any DVD.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications Guide
Using DVD player on TV
1. Connect Video Out of the DVD
player to Video Input of your
television.
Playing DVD Movies:
Using PC-DVD player on PC
1. Disable the ‘Creative Multi
Speaker Surround’ (CMSS)
function by pressing the CMSS
button until all four LEDs are
off.
2. Connect Dolby Digital com-
pressed signal output from your
DVD player to the DOLBY
DIGITAL (AC-3) SPDIF IN of
your DTT2500 Digital decoder
amplifier unit.
3. Press the CMSS button until all
its three LEDs are off to disable
the Creative Multi Speaker
Surround (CMSS) function.
Digital
Audio
Analog
Audio
For movies with Dolby
Digital 5.1 (AC-3)
PC-DVD ROM Drive
soundtracks:
MPC-to-MPC CD-Audio Cable
This signal is detected auto-
matically and the DOLBY
DIGITAL LED lights up. You
will experience Dolby Digital
5.1 channel output.
LINE IN
MIC IN
CD_IN
AUX_IN
For movies with Dolby
Digital 5.1 (AC-3)
LINE OUT
REAR OUT
soundtracks:
4-Channel Sound Card
(e.g. Sound Blaster Live!)
This signal is detected auto-
matically and the DOLBY
DIGITAL LED lights up. You
will experience Dolby Digital
5.1 channel output.
For two-channel movies
which are Dolby Surround-
encoded carried within the
Dolby Digital compressed
bitstream:
Dolby Digital (AC-3)
SPDIF Out
AUDIO_OUT
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
DOLBY DIGITAL
(AC-3) SPDIF IN
LINE IN REAR IN DIGITAL ANALOG
DIN
AUTO
INPUT
15V
DC IN
For two-channel DVD
movies which are Dolby
Surround-encoded:
SPEAKER OUTPUTS
LS
C
SUBWOOFER RS
R
L
Encore Dxr2 / PC-DVD MPEG2
Decoder Card (Luxsonar)
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
Connection Guide for DeskTop Theatre 5.1 DTT2500 Digital with Sound Blaster Live! and Creative PC-DVD system.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing VCD Movies:
Using SoftMPEG player or
PlayCenter on PC
1. Select the MOVIE mode by
pressing the Creative Multi
Speaker Surround (CMSS)
button until the LED for MOVIE
mode lights up.
Using VCD player on TV
1. Connect Video Out of the VCD
player to Video Input of your
television.
2. Connect the Audio Out of the
VCD player to the Line In of
your DTT2500 Digital decoder
amplifier unit.
3. Select the MOVIE mode by
pressing the Creative Multi
Speaker Surround (CMSS)
button until the LED for MOVIE
mode lights up.
Using PC-DVD player on PC
1. Disable the ‘Creative Multi
Speaker Surround’ (CMSS)
function by pressing the CMSS
button until all four LEDs are
off.
For VCD movies with Dolby
Surround-encoded stereo
program:
You can use the Dolby Pro
Logic decoder, by selecting PRO
LOGIC DIGITAL IN, to experi-
ence 5.1-channel movie
viewing.
This mode lets you experience
the surround sound with 5.1-
channel output; all dialog and
central sounds will be heard
through the center speaker,
while music and off-stage
sounds are heard through the
other four satellites.
You can experience surround sound
instead of mono/stereo sound; all
dialog and central sounds will be
heard through the center speaker,
while music and off-stage sounds are
heard through the other four satellites.
For VCD movies:
If you are using PlayCenter to play
the VCDs, disable all CMSS effects
in your PlayCenter - use only
DTT2500 Digital CMSS MOVIE
mode.
You will have Digital 2.1
channel output. To enhance
the experience, enable the
Digital Pro Logic by pressing
the DOLBY SURROUND button
until the DIGITAL IN LED lights
up.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Games:
Playing Conventional Games
Playing Multi-format DVD Games
These games have Dolby Digital or
Dolby Pro Logic movie clips mixed
with the actual game sequence.
Select the MUSIC or MOVIE mode
by pressing the Creative Multi
Speaker Surround (CMSS) button
until the LED for MUSIC or MOVIE
mode lights up.
Playing Microsoft DirectSound 3D
or Environmental Audio Games
1. Under CMSS on your DTT2500
Digital decoder amplifier, select
FOURPOINT to fully enjoy the
4-channel gaming experience
from Microsoft DirectSound3D
or Creative Environmental
Select MUSIC or MOVIE by pressing
the Creative Multi Speaker Surround
(CMSS) button until the LED for
MUSIC or MOVIE mode lights up.
Audio (EA) titles with a 4-
channel audio card.
2. For Sound Blaster Live! users,
enable the 4-Speaker configura-
tion on your PC. Otherwise,
select FourPoint under CMSS on
your DTT2500 Digital decoder
amplifier unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Audio Music:
Karaoke Music:
Enjoying CD Audio on PC
Singing Karaoke on PC with SB
Live! and Creative PC-DVD
Decoder Card (with Creative
Navigator application)
Singing Karaoke on PC with SB
Live! only (with Creative
PlayCenter)
1. Connect your microphone to the
MIC IN of SB Live!.
2. Enable the Microphone source
in the Mixer.
3. Select one of the seven Karaoke
modes under Environment in
Creative Launcher.
4. Click the Audio Menu button on
the Creative PlayCenter to hear
only the music, i.e. with the
vocal portion masked out.
Select the MUSIC mode by pressing
the Creative Multi Speaker Surround
(CMSS) button until the LED for
MUSIC mode lights up. This mode
creates an enveloping five-speaker
surround effect that enhances stereo
music.
1. Connect your microphone to the
MIC IN of SB Live!.
2. Enable the Microphone source
in the Mixer.
3. Select one of the seven Karaoke
modes under Environment in
Creative Launcher.
4. Press the AUDIO MODE button
of the DTT2500 Digital decoder
amplifier unit until you hear
only the music i.e. vocal
portion is masked out.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Important
DeskTop Theater 5.1
DTT2500 Digital
Six-channel
Playback Levels
DDT2500 Digital is intended for individual or small group listening and will
achieve surprisingly high output levels. However, playing the system continuously at
overly loud, distorted levels on heavy bass program material may cause its internal fuse
to blow.
The fuse can be replaced only by a qualified representative. To avoid this inconve-
nience and a possible non-warranty repair charge, reduce the playback volume when
the system shows obvious signs of stress, i.e. it sounds “raspy,” “fuzzy,” and/or
“muddy.”
Amplifier Specification
s
Left, Right, Left Surround, Right Surround amplifiers, each of four:
7 watts RMS per channel
Center Channel amplifier: 21 watts per channel
Subwoofer amplifier: 20 watts per channel
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative European Help Line
CREATIVE LABS (IRELAND) LTD.
Technical Support Department
Ballycoolin Business Park, Blanchardstown,
Dublin 15 Ireland
Italy
Holland
Tel
+39 02 4828 0000
+43 (01) 589 244 320
+32 (02) 7171 198
Tel
+31 (0) 205040616
Austria
Tel
Switzerland
Tel
Fax: +353 1 8205052
+41 (01) 2121 868
United Kingdom
Belgium
Tel
Portugal
Tel
Tel
+44 1189 344 744
800 8 53066
Germany
Denmark
Czech Republic
Tel
+49 69-66982900
Tel
+45 3525 9498
Tel
+353 1 8066964
Ireland
Finland
Poland
Tel
+353 1 820 7555
+33 1 55 46 87 77
+34 (91) 66 25 116
Tel
+358 (09) 2294 3101
+47 2305 0401
Freephone 00 800 353 1229
France
Tel
Norway
Tel
Hungary
Freephone 06 800 1222
Spain
Tel
Sweden
Tel
Russia
Tel
+46 (08) 7519 147
+353 1 8066967
Operating Hours / Heures d’ouverture / Öffnungszeiten / Ore d’ufficio / Horario de oficina / Openingstijden / Horário de abertura
EUROPE
Mon-Fri.
Lun. au vend.
Mo-Fr
Lunedì-venerdì
Lunes-Viernes
Maandag-Vrijdag
Segunda a sexta-feira
:
:
:
:
:
:
:
Business Hours
Heures de bureau
Geschäftszeiten
Orario d’ufficio
Horario de oficina
Kantooruren
Sat-Sun & Public Holidays
Sam., dim. et jours fériés
Sa, So & gesetzl. Feiertage
Sabato, domenica e festivi
Sábados, domingos y festivos
Zat.-Zon. & Nationale Feestdagen
Sábado, domingo e feriados
:
:
:
:
:
:
:
Closed
Fermé
Geschlossen
Chiuso
Cerrado
Gesloten
Fechado
Horário de expediente
Internet
To receive technical support via the Internet, please e-mail: [email protected]
Web Site
Download from Www.Somanuals.com. All Manuals Search And Download.
23
|