About Your Creative Wireless Adapter
CB3200/CB3700
Thank you for choosing the Creative Wireless Adapter CB3200/CB3700.
Your USB adapter is easy to set up and supports wireless transfer rates of up to 3 Mbps*.
Your USB adapter adds Bluetooth technology to your computer and can be paired
Installing Your USB Adapter
1
Before you install your Creative Wireless Adapter CB3200/CB3700, take note of
the Bluetooth Device Address (BDA) found on a label on your USB adapter.
You need them later to verify your Bluetooth installation and pair your Bluetooth
devices.
6. Connect your USB adapter to your computer's USB port.
with other Bluetooth-enabled devices.
Power/Activity LED
Windows 98 and 98 SE users may be prompted by an Add New Hardware Wizard dialog
box when Microsoft® WIndows® detects your USB device. Follow the instructions on the
screen. You may need to insert the Windows Installation CD into the CD-ROM drive during
installation. Some computers may be supplied without the Windows CD, but have the
necessary files stored in c:\windows\options\cabs (replace c:\ with the drive letter your
Windows has been installed on).
Turns on when your USB adapter is
successfully installed and connected to your
computer. When blinking blue, the USB
mitting or receiving data.
DO NOT connect the USB adapter to your computer before installing the
software. You will be required to do so halfway through the installation.
The My Bluetooth Places icon appears on your computer’s desktop and
system tray.
1. Turn on your computer and insert the Installation CD into your
CD-ROM/DVD-ROM drive. Your CD should start automatically. If it does not,
follow the steps below:
For Windows XP Service Pack 2 only
1. When the Found New Hardware Wizard dialog box appears, select No, not
this time and click the Next button.
2. Select Install from a list or specific location (Advanced) and click the Next
button.
3. Select Don’t search. I will choose the driver to install and click the Next
button.
4. Select CB3200/CB3700 Creative Wireless Adapter and click the Next button.
5. Click the Finish button. Your USB adapter should appear under Bluetooth
Devices in Device Manager.
i) Double-click the My Computer icon.
Alternatively, click Start → My Computer.
ii) Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay.
your computer's USB port.
2. Follow the instructions on the screen to install the Bluetooth Software.
3. When the Bluetooth Device Not Found dialog box appears, click the
Cancel button.
pairing button
4. Click the Finish button.
m)
m)
5. When prompted, restart your computer.
Your computer's USB port may be located on the front panel. If your USB adapter does
not fit into the USB port located on the back panel, connect it to the USB port located
on the front panel.
Quick Start
*
May vary depending on actual operating environment and mode. Effective throughput of up
to 2.1 Mbps.
Product Registration
Configuring Your Bluetooth
Device
1. On your taskbar, right-click the My Bluetooth Places icon , and select
Start Using Bluetooth.
Registering your product ensures you receive the most appropriate service and product support
Pairing Your USB Adapter to Other Bluetooth-Enabled Devices
4
2
Please note that your warranty rights are not dependent on registration.
You need to pair your USB adapter for it to work with other Bluetooth-enabled devices.
Creative Knowledge Base
Resolve and troubleshoot technical queries at Creative's 24-hour self-help Knowledge Base.
a. Using My Bluetooth Places Application
b. Using the Auto-connect Pairing Button
The Initial Bluetooth Configuration Wizard dialog box appears.
To pair your USB adapter to Bluetooth-enabled devices using My Bluetooth
Places, do the following:
To pair your USB adapter to a Bluetooth-enabled keyboard or mouse, using the
2. Follow the instructions on the screen to complete the configuration.
Customer Support Services & Warranty
Auto-connect pairing button, do the following:
3. When you are prompted to install another Bluetooth device, click the Skip
You can find Customer Support Services, Warranty and other information in the Installation CD.
button.
1. On your taskbar, double-click the My Bluetooth Places icon
The My Bluetooth Places window appears.
.
These steps are for Windows XP or Windows 2000 only.
Customer Support Services
Warranty
d:\support\<region>\<language>\support.chm
4. Click the Finish button.
1. Make sure that your Bluetooth-enabled keyboard or mouse is in Discoverable
mode.
For more information, refer to your keyboard or mouse's User's Guide.
2. Press and hold the Auto-connect pairing button on your USB adapter until
the Power/Activity LED blinks blue.
3. When the Bluetooth Device Selection dialog box appears on the screen, your
USB adapter will detect your Bluetooth-enabled mouse or keyboard.
4. To pair to your keyboard
d:\warranty\<region>\<language>\warranty.chm
Please keep your Proof of Purchase for the duration of the
Warranty period.
2. Double-click the Find Bluetooth Devices icon.
For Windows XP only: In the Bluetooth Tasks box, click View devices in range.
3. In the Entire Bluetooth Neighborhood dialog box, double-click the
Regulatory
d:\fcc\<model>\doc.chm
Verifying Your Bluetooth
Installation
Bluetooth-enabled device that you want to pair to.
User's Guide
d:\manual\<language>\manual.pdf
4. Follow the instructions on the screen.
(replace d:\ with the drive letter of your CD-ROM/DVD-ROM drive, <region> with the region you are
in, <model> with the product model, and <language> with the language that the document is in).
3
ꢀ
For more information on My Bluetooth Places, refer to the User's Guide (on CD).
The Bluetooth Security Setup dialog box will appear once your keyboard is
detected. On the PIN Code box, a keyboard pairing pin is displayed. Type the
pin in the PIN Code box, and press the <Enter> key. The Bluetooth icon
on the taskbar turns green.
Keep this document for future reference.
ꢀ
If prompted for a Bluetooth pin code, enter the pin code of the
1. On your taskbar, right-click the Bluetooth icon, and select Advanced
Configuration.
Bluetooth is
a
registered trademark of the Bluetooth SIG, Inc., USA. Windows is
a
registered trademark of Microsoft
commitment on
Bluetooth-enabled device that you are pairing your USB adapter to.
Corporation. Information in this document is subject to change without notice and does not represent
a
The Bluetooth Configuration dialog box appears.
the part of Creative Technology Ltd. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of
Creative Technology Ltd. The software described in this document is furnished under a license agreement and may be used
or copied only in accordance with the terms of the license agreement. It is against the law to copy the software on any other
medium except as specifically allowed in the license agreement. The licensee may make one copy of the software for
backup purposes. Copyright © 2005 Creative Technology Ltd. All rights reserved. Version 1.0 February 2006.
2. Click the Hardware tab. The Bluetooth Configuration dialog box appears.
To pair to your mouse
3. In the Device Properties box, check the device status and device address.
The device should be indicated as working properly and the device address
should match the BDA, found on a label on your USB adapter.
The Confirmation Required dialog box will appear once your mouse is
detected. Follow the instructions and click the Click here button. The
Bluetooth icon on the taskbar turns green.
P/N: 235-10263
Download from Www.Somanuals.com. All Manuals Search And Download.
|