RFX200S
Three-Channel Guitar Amplifier
with Stereo Digital Signal
Processing
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
Congratulations!
You are now the proud owner of the Crate RFX200S three-channel guitar amplifier
with Stereo Digital Signal Processing (DSP). This rugged amplifier combines out-
standing features with serious clean and distorted sounds. Dual DSP controls provide
15 “Must Have” effects and 15 Delay effects which can be combined for a wide variety
of sounds. The Save/Tap button allows you to manually set the tempo of many of the
effects and to save new DSP presets in the amplifier’s non-volatile memory. A sepa-
rate Reverb control adds even more to the array of effects. Channel switching and
DSP may be controlled by means of a footswitch, which also allows access to two DSP
presets on each of the three channels. Stereo and Mono Effects Loops allow you to
connect additional effects for even greater flexibility. The electronic tuner (with a Mute
switch for silent tuning) lets you get tuned and stay in tune any time the amplifier is on.
Like all Crate products, your RFX200S amplifier is designed by musicians, and built
using only the best components. Extensive testing confirms that this amplifier is the
absolute best it can be.
In order to get the most out of your new amplifier, we strongly suggest that you read
the information contained in this guide before you begin playing.
CRATE
And thank you for choosing
.
CAUTION
PRECAUCION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RIESGO DE CORRIENTAZO
NO ABRA
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS
O
DESCARGAS
LA
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO
A
LLUVIA
O
LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
IMPORTANT SAFETY INSTRUCTIONS
•
•
READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR PROPER OPERATION,
THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET.
•
•
•
DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH
VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
•
•
•
PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE OPERA-
TION AND TO AVOID INJURY.
•
•
•
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS
CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS
OPERATED AT HIGH VOLUME.
•
WARNING: THIS UNIT REQUIRES A SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRIC CODES HAVING THE LINE SUPPLY VOLTAGE,
POWER, AND FREQUENCY IDENTIFIED ON THE REAR OF THE UNIT. THE OUTLET MUST REMAIN ACCESSIBLE TO DISCONNECT THE UNIT IF A
FAULT SHOULD ARISE WHILE IN USE. THIS UNIT SHOULD BE UNPLUGGED WHEN NOT IN USE.
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
The Top Panel:
LOW
MID
HIGH
LOW
MID
HIGH
STEREO
GAIN
LEVEL
GAIN
LEVEL
1
2
INPUT
1
2
3
4
5
6
7
8
9 10 11 12 13
1: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable.
CHANNEL 1 - Featuring a low gain FlexWave circuit for clean sounds or sounds with mild dis-
tortion:
2: LOW: Use this control to adjust the low frequency level of Channel 1.
3: GAIN: Use this control to adjust the amount of distortion produced by Channel 1.
4: MID: Use this control to adjust the midrange frequency level of Channel 1.
5: LEVEL: Use this control to adjust the output level of Channel 1.
6: HIGH: Use this control to adjust the high frequency level of Channel 1.
7: CHANNEL 1 SELECT: This switch, when depressed, selects Channel 1 as the active channel. The
adjacent LED illuminates when Channel 1 is active.
CHANNEL 2 - Featuring a medium gain FlexWave circuit for moderate distortion and crunch:
8: LOW: Use this control to adjust the low frequency level of Channel 2.
9: GAIN: Use this control to adjust the amount of distortion produced by Channel 2.
10: MID: Use this control to adjust the midrange frequency level of Channel 2.
11: LEVEL: Use this control to adjust the output level of Channel 2.
12: HIGH: Use this control to adjust the high frequency level of Channel 2.
13: CHANNEL 2 SELECT: This switch, when depressed, selects Channel 2 as the active channel. The
adjacent LED illuminates when Channel 2 is active.
CHANNEL 3 - Featuring a high gain FlexWave circuit for extreme distortion and sustain:
14: LOW: Use this control to adjust the low frequency level of Channel 3.
15: GAIN: Use this control to adjust the amount of distortion produced by Channel 3.
16: MID: Use this control to adjust the midrange frequency level of Channel 3.
17: LEVEL: Use this control to adjust the output level of Channel 3.
18: HIGH: Use this control to adjust the high frequency level of Channel 3.
19: CHANNEL 3 SELECT: This switch, when depressed, selects Channel 3 as the active channel. The
adjacent LED illuminates when Channel 3 is active.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
LOW
MID
HIGH
MUTE
GAIN
LEVEL
3
REVERB
SAVE / TAP
EFFECTS
DELAY
14 15 16 17 18 19 20
20: MUTE: This switch, when depressed, mutes the output signal at the speaker jacks and the effects
loops, allowing you to silently tune or switch instruments. The adjacent LED illuminates when the
Mute function is active.
21: TUNER: The electronic tuner is active whenever the amplifier is turned on, providing constant,
“real time” tuning. The bottom row of LEDs indicate which note (string) is being tuned. The top row
of LEDs provides directional queues to facilitate quick and precise tuning of your instrument. The
indicated note (string) is properly tuned when only the center LED is illuminated.
22. EFFECTS: Use this control to select one of the fifteen digital effects. Complete information about
the DSP effects is on page 7.
23. DELAY: Use this control to select one of the fifteen digital delay effects. Complete information
about the DSP effects is on page 7.
24: SAVE/TAP: Use this pushbutton to set the tempo of many of the effects by tapping the button
repeatedly in time with the desired tempo. The Save/Tap button is also used to save DSP presets
and to restore the factory default DSP settings. Additional information about the Save/Tap button is
on pages 7 and 8.
25: SAVE/TAP LED: This LED flashes in time with the tempo set by the Save/Tap button (#4) and
serves as a status indicator for certain DSP activities (see page 8).
26: REVERB: Use this control to adjust the amount of the digital reverb effect. In its fully counter
clockwise position the signal is “dry” (without any reverb). As you rotate the control clockwise the
amount of reverb increases. The Reverb setting may be saved as a channel preset - see page 8.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
The Bottom Panel:
SPEAKER OUTPUTS
STEREO
EFFECTS LOOP
MONO
EFFECTS LOOP
100 WATTS @ 4 OHM MINIMUM LOAD
FOOT
RIGHT
LEFT
(CHORUS WET)
SWITCH
(CHORUS DRY)
RETURN
SEND
RETURN
SEND
29
30
31
32
33 34
27: POWER (not shown): Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom)
of the switch depressed. The switch illuminates when the power is on.
28: AC LINE CORD (not shown): This grounded power cord is to be plugged into a grounded power outlet, wired
to current electrical codes and compatible with the voltage, power, and frequency requirements stated on the bot-
tom panel. Do not attempt to defeat the safety ground connection.
29: SPEAKER OUTPUTS: Use these jacks to connect the amplifier to the speakers. The RFX200S is shipped from
the factory with a cable from each channel connected to the speakers within the cabinet. Additional speakers may
be connected providing the four ohm minimum load rating for these jacks is observed. When using the stereo
Chorus effect the right channel is dry and the left channel is detuned (wet). Each channel will provide 70 watts RMS
into an eight ohm load and 100 watts RMS into a four ohm load.
30: STEREO EFFECTS LOOP RETURN: When using a stereo external effects processor, connect this jack to the
output jack of the effect by means of a shielded three conductor signal cable terminated with a stereo (R/T/S) 1/4”
connector.
31: STEREO EFFECTS LOOP SEND: When using a stereo external effects processor, connect this jack to the
input jack of the effect by means of a shielded three conductor signal cable terminated with a stereo (R/T/S) 1/4”
connector.
32: MONO EFFECTS LOOP RETURN: When using a mono external effects processor, connect this jack to the
output jack of the effect by means of a shielded signal cable.
33: MONO EFFECTS LOOP SEND: When using a mono external effects processor, connect this jack to the input
jack of the effect by means of a shielded signal cable.
34: FOOTSWITCH: Use this jack to connect the footswitch cable (5-conductor midi cable) to the four-button
footswitch (supplied). This allows you to remotely switch between the channels, set tap tempos, save new presets,
and access a second set of DSP presets. (See page 9 for additional information.)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
The DSP Section:
The RFX200S features DSP controls
for Effects, Delay and Reverb. Complete
information about the Effects and Delay
controls is given below. The Effects con-
trol selects the “pitch modified” and wah
REVERB
SAVE / TAP
EFFECTS
DELAY
effects. Many of these effects have their speed controlled by the Save/Tap button. The
Delay control selects the delay or echo effects. All of these effects have their speed con-
trolled by the Save/Tap button. Additional information is provided on pages 5 and 10.
SIGNAL PATH FOR SPECIAL DELAY EFFECTS:
DELAY EFFECTS
SIGNAL PATH FOR ALL OTHER EFFECTS:
EFFECTS DELAY
EFFECTS:
NAME
DESCRIPTION
stereo chorus w/low depth
SAVE/TAP BUTTON CONTROLS:
speed: 1 cycle/tap - period: .05 - 1 second
speed: 1 cycle/tap - period: .05 - 1 second
speed: 1 cycle/tap - period: .05 - 1 second
speed: 1 cycle/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
n/a
Chorus 1
Chorus 2
Chorus 3
Chorus 4
Flange 1
Flange 2
Flange 3
Flange 4
Phaser 1
Phaser 2
Phaser 3
Phaser 4
Oct-
stereo chorus w/medium low depth
stereo chorus w/medium high depth
stereo chorus w/high depth
flanger w/low depth
flanger w/medium low depth
flanger w/medium high depth
flanger w/high depth
phase shift w/low feedback
phase shift w/medium low feedback
phase shift w/medium high feedback
phase shift w/high feedback
adds signal one octave below original
medium phase w/touch sensitive wah
touch sensitive wah wah
Phase Wah
Wah
n/a
n/a
bypass (dry signal - no effect)
n/a
DELAY:
NAME
Single 1
Single 2
Single 3
Single 4
Echo 1
Echo 2
Echo 3
DESCRIPTION
single delay w/low level
single delay w/medium level
single delay w/high level
single delay w/maximum level
echo delay w/low level
SAVE/TAP BUTTON CONTROLS:
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
echo delay w/medium level
echo delay w/high level
Echo 4
echo delay w/maximum level
stereo panning delay w/low level
stereo panning delay w/medium level
stereo panning delay w/high level
stereo panning delay w/maximum level
low echo delay w/effect on echo only
medium echo delay w/effect on echo only
high echo delay w/effect on echo only
bypass (dry signal - no effect)
Ping Pong 1
Ping Pong 2
Ping Pong 3
Ping Pong 4
Special 1
Special 2
Special 3
delay time: .05 - 1 sec
delay time: .05 - 1 sec
n/a
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
Storing Your Own Presets:
Each channel of the RFX200S has two factory assigned DSP presets, as shown on
pages 10 and 11. No matter what the settings of the DSP controls, the preset is recalled
when a channel is selected. You may change the DSP settings by rotating the DSP con-
trols - these changes will remain active until a different channel is selected, but will not
be there for later use unless they are saved. To save a new DSP preset to a channel,
first make the desired DSP changes. Then press and hold the Save/Tap button for about
three seconds. The Save/Tap LED will flash through three quick sequences, indicating
the preset was saved. The new preset is stored for that channel and will remain in mem-
ory until a new preset is stored for that channel or the factory presets are restored.
We recommend making copies of page 14 of this guide for the purpose of writing down your own presets.
REVERB
REVERB
REVERB
SAVE / TAP
TAP
SAVE / TAP
EFFECTS
DELAY
EFFECTS
DELAY
EFFECTS
DELAY
3 SECONDS
CHANGES ARE
SAVED AS
NEW PRESET
Restoring the Factory Presets:
The factory assigned DSP presets may be restored, erasing any changes you have
made. Turn the amplifier off. Press and hold the Save/Tap button as you turn the amplifi-
er on. The Save/Tap LED will flash through two quick sequences, indicating the factory
presets have been restored.
More About the Save/Tap Button:
The Save/Tap button is used to set the tempo of an effect by pressing it twice within
a one second time frame. The time between the two taps sets the timing of the effect. If
the Save/Tap button is pressed an odd number of times (once, three times, etc.), the tim-
ing will default to the maximum one second time period.
The Effects and the Delays may each have a different tap speed. The default “target”
for the Save/Tap button is the Delay control. To select the Effects control as the tap but-
ton’s target, rotate the Effects control. The Save/Tap tempo function will automatically
revert back to the Delay control 16 seconds after the Effects control is rotated, or when
the tap speed was last changed for the Effects control.
NOTE: In most cases, it is usually more pleasing to the ear to set a slower tap speed for the HI effects and
a faster tap speed for the LO effects.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
Using the Footswitch:
The special Crate four-button footswitch supplied with the RFX200S performs a
variety of functions. The footswitch allows remote channel selection, remote Tap/Save
for each channel, and allows access to an additional DSP preset for each channel of
the amplifier. Use only the supplied Crate four-button momentary footswitch with the
RFX200S. A standard 5-wire midi cable (supplied) may be used to connect the
footswitch to the amplifier.
STEREO
EFFECTS LOOP
MONO
EFFECTS LOOP
When the footswitch is connected
to the amplifier, the first tap of but-
tons 1 - 3 select the corresponding
channel. Once a channel is selected,
consequent taps of the same button
produce the same results as tapping
the front panel Save/Tap button – you
can use the footswitch to store pre-
sets and set the tempo of an effect.
(See page 8.)
FOOT
SWITCH
RETURN
SEND
RETURN
SEND
RFX200 REAR PANEL
The “original” DSP presets are
active for each channel when the #4
footswitch LED is illuminated. These
are referred to as “DSP Bank ‘A’.”
When the #4 button is switched and
the LED is off, a second DSP preset
may be stored and recalled for each
channel - “DSP Bank ‘B’.”
5-Conductor
MIDI cable
FOOTSWITCH
NOTE: DSP Bank “B” pre-
sets are only accessible
1
2
3
4
when the footswitch is
connected to the amplifier.
When the footswitch is not
connected, only DSP Bank
“A” is accessible.
CH. 1 SELECT;
CH. 2 SELECT;
CH. 3 SELECT;
LED on: DSP BANK A
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
DSP Factory Presets:
The RFX200S Factory Presets for the DSP section are as follows:
Factory Preset 1: Clean w/Chorus, Delay, Reverb
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo MEDIUM
TAP Tempo MEDIUM
Factory Preset 2: Rhythm w/Slapback Delay
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo FAST
Factory Preset 3: Solo w/Flange, Delay, Reverb
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo MEDIUM
TAP Tempo MEDIUM
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
DSP Factory Presets:
The RFX200S Factory Presets for the DSP section are as follows:
Factory Preset 4: Clean w/Reverb
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo N/A
Factory Preset 5: Rhythm w/Reverb
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo N/A
Factory Preset 6: Solo w/Reverb
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo N/A
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
Suggested Settings:
LOW
LOW
LOW
LOW
LOW
LOW
MID
MID
MID
MID
MID
MID
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
LOW
LOW
LOW
LOW
LOW
LOW
MID
MID
MID
MID
MID
MID
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
"Oceanic"
STEREO
Clean with
Vibrato, Delay,
& Reverb
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
1
1
1
1
1
1
2
2
2
2
2
2
INPUT
"Super Funk"
Clean with
Wah, Delay,
& Reverb
STEREO
INPUT
"Arena"
Rhythm with
Reverb
STEREO
INPUT
& Delay
"Haze Faze"
Rhythm with
Phase
STEREO
INPUT
& Reverb
"Solo Wah"
Solo with
Wah, Delay
& Reverb
STEREO
INPUT
"Octanator"
Solo with
Octave
STEREO
INPUT
& Reverb
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
Suggested Settings:
LOW
LOW
LOW
LOW
LOW
LOW
MID
MID
MID
MID
MID
MID
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
EFFECTS TAP Tempo: MEDIUM
DELAY TAP Tempo: MEDIUM
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
3
3
3
3
3
3
REVERB
REVERB
REVERB
REVERB
REVERB
REVERB
SAVE / TAP
SAVE / TAP
SAVE / TAP
SAVE / TAP
SAVE / TAP
SAVE / TAP
EFFECTS
EFFECTS
EFFECTS
EFFECTS
EFFECTS
EFFECTS
DELAY
DELAY
DELAY
DELAY
DELAY
DELAY
EFFECTS TAP Tempo: N/A
DELAY TAP Tempo: FAST
EFFECTS TAP Tempo: N/A
DELAY TAP Tempo: MEDIUM
EFFECTS TAP Tempo: MEDIUM
DELAY TAP Tempo: N/A
EFFECTS TAP Tempo: N/A
DELAY TAP Tempo: N/A
EFFECTS TAP Tempo: N/A
DELAY TAP Tempo: N/A
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
DSP “Fill in the Blanks” (User Settings):
Copy this page to fill in your own DSP Presets!
User Preset:
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo
TAP Tempo
User Preset:
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo
TAP Tempo
User Preset:
REVERB
SAVE / TAP
EFFECTS
DELAY
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo
TAP Tempo
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
System Block Diagram:
TUNER
A BC D EF G
CHANNEL 1
FLEX
INPUT
WAVE
BUFFER
LEVEL
LEVEL
LEVEL
(LOW
GAIN)
INPUT
GAIN
GAIN
GAIN
HIGH MID LOW
HIGH MID LOW
HIGH MID LOW
CHANNEL 2
FLEX
WAVE
(MEDIUM
GAIN)
CHANNEL 3
FLEX
FOOTSWITCH
1
WAVE
2
3
4
(HIGH
GAIN)
MUTE
SWITCH
CONTROLLER
MONO EFFECTS LOOP
RETURN SEND
DSP
A/B
TAP/
POWER
AMP 2
SEND RETURN
SAVE
DSP
SPEAKER
OUTPUTS
RIGHT
(CHORUS
DRY)
STEREO EFFECTS LOOP
DAMPING
REVERB DELAY EFFECTS
POWER
AMP 1
SPEAKER
OUTPUTS
LEFT
(CHORUS
WET)
DAMPING
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RFX200S Three-Channel Guitar Amplifier with Stereo DSP
RFX200S TECHNICAL SPECIFICATIONS:
Output Power Rating
70W per channel @5% THD, 8 ohm load
100W per channel @5% THD, 4 ohm load
Speaker Size and Rating
Input Impedance
(2) Celestion Seventy 80W 12” 8 ohm
470kΩ
Total System Gain
Ch 1
Ch 2
Ch 3
74dB, all controls @10
88dB, all controls @10
103dB, all controls @10
Maximum Input Signal Accepted
5 volts peak-to-peak
Channel 1
Low Control
Mid Control
High Control
26dB range @ 70Hz
10dB range @ 900Hz
20dB range @ 10kHz
Channel 2
Low Control
Mid Control
High Control
26dB range @ 70Hz
10dB range @ 900Hz
20dB range @ 10kHz
Channel 3
Low Control
Mid Control
High Control
17dB range @ 100Hz
16dB range @ 1kHz
12dB range @ 7kHz
Power Requirements
Size and Weight
120 VAC, 60Hz, 95VA
100/115VAC, 50/60Hz, 95VA;
230VAC, 50/60Hz, 95VA
21” H 27-3/4” W x 11-1/4” D, 45 lbs.
The RFX200S is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
@2005 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
47-387-02 • 083105
Download from Www.Somanuals.com. All Manuals Search And Download.
|