REPAIR PARTS MANUAL
MODEL NUMBER 253560
1350 Series B&S Engine
27" Two-Stage Power-Propelled
SNOW THROWER
422615 09.08.08 SBW/TH
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
AUGER HOUSING / IMPELLER ASSEMBLY
2
1
01.07.018-A
KEY
NO.
PART
NO.
DESCRIPTION
1
2
420495X479
420496X479
AUGER 27 LH
AUGER 27 RH
3
4
2
4
KEY
NO.
PART
NO.
DESCRIPTION
1
2
3
174762X479
178777X479
72270506
751153
SKID PLATE LH
SKID PLATE RH
CARRIAGE BOLT 5/16−18 X .75
NUT 5/16−18
4
01.11.001-A
1
3
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
AUGER HOUSING / IMPELLER ASSEMBLY
5
11
6
11
7
15
16
14
12
8
13
4
11
17
12
3
10
11
1
9
2
33
32
34
30
31
31
26
36
29
28
20
27
21
22
23
25
35
24
23
22
2 (EXPLODED)
21
19
18
01.07.004-B
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
AUGER HOUSING / IMPELLER ASSEMBLY
KEY
NO.
PART
NO.
DESCRIPTION
1
2
3
4
5
6
7
8
175321X479
196710
188909
191079
175322
178675X008
192199
405400
73800400
74780426
155377
163183
19111507
10040500
74940516
180355
194189
407760
407761
407766
407770
407762
174697
407763
407764
189282
407758
174683
407757
7836M
IMPELLER
GEARBOX ASSEMBLY
BEARING
IMPELLER PULLEY
DISCHARGE BASE
CORNER BRACKET
CLEAN OUT TOOL
TOOL CLIP
NUT 1/4−20
SCREW 1/4−20 X .625
NUT 5/16−18
SCREW 5/16−18 X .625
WASHER
LOCKWASHER 5/16
SCREW 5/16−18 X 1.00
CARRIAGE BOLT
SCREW 13−16 X .625
PLUG
GEARBOX COVER RH
GASKET
SEAL
BEARING
THRUST WASHER 1.00
WORM GEAR
AUGER SHAFT
SQUARE KEY
BEARING
THRUST WASHER
IMPELLER SHAFT
ROLL PIN
THRUST WASHER
THRUST BEARING
BEARING
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
174681
174684
407769
407768
407767
407765
O−RING
SCREW 5/16−18 X .750
GEARBOX COVER LH
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
CONTROL PANEL / DISCHARGE CHUTE
5
7
3
14
15
*13
*10
*9
2
4
*8
6
KEY
NO.
PART
NO.
DESCRIPTION
6
1
2
3
4
404770X615
178633X615
420673
420325
414280
CHUTE WELDMENT
DEFLECTOR WELDMENT
DEFLECTOR CONTROL ASSEMBLY
DEFLECTOR SEAL
KNOB BLACK
*12
1
*11
5
6
7
128415
17501010
179829
179246
191730
72250505
751153
184505
420679
420672
POP RIVET
SCREW 10−24 X .625
SHOULDER SCREW
PLASTIC WASHER
NUT 1/4−20
CARRIAGE BOLT 5/16−18 X .50
NUT 5/16−18
DEFLECTOR SPRING
(SERVICE PART) DEFLECTOR CONTROL HEAD
(SERVICE PART) DEFLECTOR CONTROL CABLE
*8
*9
*10
*11
*12
*13
14
15
01.09.002-B
NOTE:
1. ALL ITEMS INDICATED WITH AN * ARE PROVIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH PRODUCT.
2. ITEMS 14 AND 15 ARE SERVICE PART NUMBERS TO ALLOW PURCHASE OF INDIVIDUAL ITEMS IF NECES-
SARY.
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
CONTROL PANEL / DISCHARGE CHUTE
2
2
1
*3
*6
*6
KEY
NO.
PART
NO.
DESCRIPTION
*4
01.09.007-A
*5
1
2
*3
*4
*5
*6
420337
17501010
420678
420677
420675
420674
LEVER/CABLE ROTATOR ASSEMBLY
SCREW 10−24 X .625
ROTATOR HEAD
ROTATOR PIVOT BRACKET
PULLEY PIVOT
CABLE ASSEMBLY
NOTES:
1. ITEMS INDICATED WITH AN * ARE LISTED AS REFERENCE FOR SERVICE PARTS ONLY.
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
HANDLES
1
2
KEY
NO.
PART
NO.
4
DESCRIPTION
1
2
3
4
419797X479
405784X479
150078
LOWER HANDLE
3
PIVOT SUPPORT WELDMENT
SCREW 5/16−18 X .750
SCREW 3/8−16 X 1.00
17000616
4
4
4
3
01.05.002-B
KEY
NO.
PART
NO.
DESCRIPTION
1
2
3
183351
184471
175262
CONSOLE PANEL
SHOULDERSCREW10−24X.625
SCREW 10−24 X 1.25
2
1
3
2
3
01.10.005-A
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
HANDLES
5
1
6
8
7
2
9
5
3
8
6
7
KEY
NO.
PART
NO.
8
DESCRIPTION
9
4
1
2
3
4
5
6
7
8
9
419800X479
419801X479
196944
196943
199513
74780512
74780524
751153
PLOW HANDLE LH
PLOW HANDLE RH
PANEL BRACKET LH
PANEL BRACKET RH
HANDLE GRIP
SCREW 5/16−18 X .750
SCREW 5/16−18 X 1.50
NUT 5/16−18
01.08.003-A
155415
WASHER
KEY
NO.
PART
NO.
DESCRIPTION
1
2
3
4
5
6
412675X004
414572
178831
169675
17060410
421252X004
INTERLOCK SPRING
INTERLOCK CAM
TORSION SPRING
RETAINER
SCREW 1/4−20 X .625
INTERLOCK STOP
4
3
2
5
1
01.08.007-B
6
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
HANDLES
2
1
3
8
9
4
KEY
NO.
PART
NO.
5
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
180480
405740
180445
187716
180447
178669
180926
72270506
155377
169675
IMPELLER ROD ASSEMBLY
TRACTION ROD ASSEMBLY
SHIFTER ROD TOP
SHIFTER ROD BOTTOM
SPRING SLEEVE
IMPELLER SPRING
TRACTION SPRING
CARRIAGE BOLT 5/16−18 X .75
NUT 5/16−18
7
10
RETAINER
5
6
01.12.001-A
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
HANDLES
10
2
11
7
4
8
9
9
5
7
6
1
3
13
8
12
KEY
NO.
PART
NO.
13
DESCRIPTION
CONTROL PANEL
CONTROL LEVER LH
CONTROL LEVER RH
TRACTION ROD ARM
IMPELLER ROD ARM
INTERLOCK ROD
SPACER
14
1
2
3
4
5
6
7
8
412683X479
412681X479
412682X479
412679X008
420889X008
412677
14
01.08.002-E
12
421613
169675
RETAINER
9
17060408
414280
414281
178899
19131316
72120618
SCREW 1/4−20 X .50
KNOB BLACK
KNOB RED
HANDLE KNOB
WASHER 3/8
CARRIAGE BOLT 3/8−16 X 2.25
10
11
12
13
14
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
DRIVE
ITEM 43 EXPLODED
69
2
68
16
1
71
17
74
18
70
72
15
14
15
9
12
11
20
21
22
73
11
76
13
24
9
19
9
23
10
11
76
4
34
75
8
76
7
6
24
5
33
23
31
76
3
35
33
39
30
29
32
50
28
35
49
51
26
52
53
36
47
27
24
76
54
55
56
49
51
57
58
26
37
45
46
52
4
23
38
49
64
67
43
48
62
76
44
40
61
63
25
24
42
59
65
41
4
40
60
01.02.003-D
66
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
DRIVE
KEY
NO.
PART
NO.
KEY
NO.
PART
NO.
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
7
8
198474
SPEED SELECTOR ASSEMBLY
SCREW 10−24 X .625
END PLATE
SCREW 5/16−18 X .50
WASHER
CONTROL ARM
CLEVIS PIN
SHIFTER PLATE
SHOULDER BOLT
SHIFTER BRACKET
NUT 1/4−20
CLUTCH PLATE
CLUTCH BRACKET
SHIFTER LINK
RETAINER
CONTROL SHAFT
CLUTCH ROD
RETAINER
SHIFTER YOKE
PIVOT ROD
RETAINER
RETURN SPRING
NUT 5/16−18
BEARING
NUT 5/16−18
RUBBER WHEEL PLATE
RUBBER RING
BEARING
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
12000007
184471
410877
413429X479
402689
414557
180522
74780520
187786
73930500
59289
175331
10040500
74610516
409475
180478
400026
850263
11050500
155452
419925X479
175324X479
180523
74780524
166785
175330
178828
85179
851084
402504
401820
198791
402393
17541008
402511
418894X479
132010
E−RING .375
SHOULDER SCREW
BOTTOM PAN
SPRING BRACKET
DRIVE PLATE ASSEMBLY
IDLER SPRING
IDLER PULLEY
SCREW 5/16−18 X 1.25
IDLER ARM
17501010
402685X615
17490508
57079
405485
198580
403097X004
402881
403096X004
191730
402856X004
416717X004
187101
700279
406109
402568
169675
401732
402310
402882
402878
751153
408981
73930500
198176X479
179831
175344
178613
74760514
12000012
402187
401619
417234
17490408
401984X479
180135
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
NUT 5/16−18
WASHER
PIVOT BUSHING
LOCKWASHER 5/16
SCREW 5/16−18 X 1.00
SPACER
TRACTION PULLEY
WASHER 3/8
LOCKWASHER 3/8
LOCKWASHER
BELT GUIDE
IDLER ARM
IDLER BRACKET
IDLER PULLEY
SCREW 5/16−18 X 1.50
NUT 5/16−18
PIN IDLER PIVOT
IDLER SPRING
RETAINER
SCREW 3/8−24 X 1.375
PULLEY SHAFT
DRIVE PLATE
BEARING
PULLEY HALF
SCREW 10−24 X .50
SPACER BEARING
SWING PLATE
WHEEL HUB
SCREW 5/16−18−.875
RETAINER RING
HEX SHAFT
CHAIN
SPROCKET SHAFT
SCREW 1/4−20 X .50
SHIFTER BRACKET
SPRING
NUT 3/8−16
SCREW 5/16−18 X .750
402652
PLATE PIVOT ROD
150078
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
DRIVE
5
6
1b
4
7
3
1b
1a
6
KEY
NO.
PART
NO.
DESCRIPTION
2
1
188226
179352
9465M1
402691
174697
179830
17490508
155443
189282
(assy of 1a,1b) AXLE ASSEMBLY
AXLE SHAFT
ROLL PIN 3/16
SPROCKET
THRUST WASHER
BEARING
BOLT 5/16−18 X .500
CLIK PIN
3
1a
1b
2
3
4
5
6
7
5
4
01.03.005-B
SQUARE KEY
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
CHASSIS / ENGINE / PULLEYS
4
2
3
4
3
KEY
NO.
PART
NO.
DESCRIPTION
-
- - - - - -
ENGINE, B&S
MODEL 20M113-1214-E1
FRAME WELDMENT
ENGINE MOUNT PLATE
ENGINE BOLT 3/8−16
SCREW 5/16−18 X .750
1
2
3
4
409346X615
417015X615
150406
150078
1
01.00.006-A
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
CHASSIS / ENGINE / PULLEYS
1
2
KEY
NO.
PART
NO.
DESCRIPTION
3
1
2
3
4
192213
179157
419744
408007
BELT COVER
IMPELLER PULLEY
TRACTION BELT
IMPELLER BELT
01.04.019-A
4
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
WHEELS
1
KEY
NO.
PART
NO.
2
DESCRIPTION
1
2
187833X417
187865X417
WHEEL ASSEMBLY LH
WHEEL ASSEMBLY RH
01.06.002-A
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
BAG OF PARTS
3
6
KEY
NO.
PART
NO.
5
8
4
DESCRIPTION
1
169675
RETAINER PIN
WRENCH
7
2
2
180684
3
4
5
6
7
8
9
10
11
12
13
184505
179829
179246
191730
72250505
751153
73800600
19131316
198636
198638
73800400
REMOTE SPRING
SHOULDER BOLT 1/4−20
NYLON WASHER 1/4−20
LOCKNUT 1/4−20
CARRIAGE BOLT 5/16−18 X 5/8
LOCKNUT 5/16−18
LOCKNUT 3/8−16
WASHER 3/8
10
9
1
13
12
SHEAR BOLT 1/4−20 X 1−3/4
SPACER
LOCKNUT 1/4−20
01.14.005-B
11
KEY
NO.
PART
NO.
DESCRIPTION
1
193071
SAFETY IGNITION KEY
1
01.14.007-A
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
CRAFTSMAN SNOW THROWER - MODEL NO. 253560
DECALS
1
1
2
3
4
7
13
5
7
10
8
9
6
KEY PART
NO. NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
199683 Decal, Danger
422725 Decal, Craftsman, 1350 S / 69 cm
199682 Decal, Danger, Deflector
184045 Decal, Danger
422638 Decal, Craftsman
184030 Decal, Instruction
415393 Decal, Traction Lever
415392 Decal, Auger Lever
415477 Decal, Speed Control
10 184031 Decal, Remote Deflector
13 180433 Decal, Sound Level
- - 422620 Operator's Manual, European
- - 422621 Operator’s Manual, Scandinavian
- - 422615 Repair Parts Manual, English
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED 2-YEAR WARRANTY ON CRAFTSMAN SNOW THROWER
When used and maintained according to the operator’s manual instructions, if this snow thrower fails due to a
defect in material or workmanship within two years from the date of purchase, call 1-800-4-MY-HOME® to arrange
for free repair.
During the first 30 days of purchase, there will be no charge to service the product in your home. For your con-
venience, in-home warranty service will still be available after the first 30 days of purchase, but a trip charge will
apply. This charge will be waived if you transport the product to an authorized Craftsman drop-off location. For the
nearest authorized location, call 1-800-4-MY-HOME®.
Warranty coverage does not include:
• Expendable items that become worn during normal use, including but not limited to spark plugs, shear pins, belts.
• Standard maintenance servicing, oil changes, or tune-ups.
• Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass.
• Repairs necessary because of operator abuse, including but not limited to damage caused by impacting objects
that bend the frame, crankshaft or auger, or over-speeding the engine.
• Repairs necessary because of operator negligence, including but not limited to damage caused by improper
storage, failure to use the proper grade and amount of engine oil, or failure to maintain the equipment according
to the instructions contained in the operator’s manual
• Engine (fuel system) cleaning or repairs necessary because of fuel determined to be contaminated or oxidized
(stale). In general, fuel should be used within 30 days of its purchase date.
• Normal deterioration and wear of the exterior finishes, or product label replacement.
This warranty applies for only 90 days if this product is used for commercial or rental purposes.
This warranty applies only while this product is within the United States.
This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state.
Sears, Roebuck And Co., Dept. 817WA, Hoffman Estates, IL 60179
Download from Www.Somanuals.com. All Manuals Search And Download.
|