Operators Manual
FLOOR JACK
Model 950138 - 2-1/4 Ton Capacity
• Safety
• Operation
• Maintenance
• Parts
BEFORE using this product, read this manual
and follow all its Safety and Operating
!
instructions. Failure to do so may result in
personal injury and/or property damage.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
!
!
WARNING
WARNING
• Study, understand, and follow all
instructions provided with and on this
device before use.
• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Lifting device only.
• Immediately after lifting, support the
vehicle with appropriately rated jack
stands.
• Do not move or dolly the vehicle while
on the jack.
• Failure to heed these markings may
result in personal injury and/or property
damage.
To avoid crushing and related injuries:
• NEVER work on, under or around a load
supported only by a jack.
• ALWAYS use appropriately rated jack
stands.
! SAFETY MESSAGE !
Be sure all tools and personnel are clear
before lowering load. No alterations shall
be made to this device. Only attachments
and/or adapters supplied by the
manufacturer shall be used. Lift only on
areas of the vehicle as specified by the
vehicle manufacturer.
NOTE: Jack stands are rated per pair
unless otherwise noted.
Use 1 matched pair per vehicle only.
!
ADVERTENCIA
• Leer, comprender, y seguir las
instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la
información de seguridad deben estar
comunicado en lengua del operador
antes del uso.
• No seguir estas indicaciónes puede
causar daños personales o materiales.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
KNOW YOUR JACK
BEFORE USE
• Read the operator's manual completely
and familiarize yourself thoroughly with the
product, its components and recognize the
hazards associated with its use.
Compare Fig. 1 illustration with your jack
BEFORE operation to become familiar with
the location of various jack components.
• Occasionally during shipment and/or
handling air can get trapped in the system,
which can interfere with the jacks lifting
performance.
saddle
lifting arm
handle
sleeve
• It is recommended to cycle the jack a few
times without applying load:
• Engage release valve with notched end
of jack handle. Close release valve by
turning the jack handle clockwise until
tight.
filler plug
(not shown,
on reservoir)
front
wheel
release
valve
cover
• Insert jack handle into handle sleeve.
Pump the handle until the jack saddle
reaches its maximum height.
frame
• Engage release valve with notched end
of jack handle. Open release valve by
turning jack handle counterclockwise, but
no more than 1/2 full turn.Allow the saddle
to reach its lowest position.
castor
base
engage release
valve with this end
jack handle
• Repeat the above procedure a few times.
• To release air from the hydraulic system:
FIG. 1
• Engage release valve with notched end
of jack handle. Open the release valve
b y t u r n i n g t h e j a c k h a n d l e
counterclockwise, but never by more than
1/2 full turn.
• Remove the oil filler plug from the cylinder.
(see Fig. 2)
• Insert jack handle into handle sleeve.
Rapidly pump jack handle through several
full strokes.
SPECIFICATIONS
Rated Capacity: 2-1/4 Ton/4500 Lbs
Jack Dimensions: 21” x 8-1/2” x 5-1/2”
Lifting Range: 5-1/2” ~ 15” (Approx.)
(140mm - 381mm)
Oil Capacity: 90 cc ± 5 cc
• Reinstall the oil filler plug into the cylinder
again and jack is now ready to use.
Net Weight: 27.1 lbs. (Approx.)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
• Continue to pump the jack handle to lift the
OPERATING PRINCIPLES
vehicle to the desired height. After lifting,
support the load with appropriately rated
jack stands BEFORE working on the
vehicle.
• With release valve closed, an upward
stroke of the jack handle draws oil from the
reservoir tank into the plunger cavity.
Hydraulic pressure holds a valve closed,
which keeps the oil in the plunger cavity.
• A downward stroke of the jack handle
releases oil into the cylinder, which forces
the ram out. This raises the saddle. (NOTE:
To avoid damage to the cylinder if the load
exceeds the rated capacity of the jack, oil
is automatically released back into the
reservoir through the safety overload
valve.)
• When the ram reaches maximum
extension, oil is bypassed back into the
reservoir to prevent an over-extended ram
stroke and possible damage to the jack.
Rated capacity of jack stands is per
!
pair, it is NOT the sum of individual
capacities unless specifically noted to the
contrary by the jack stand manufacturer.
Do Not exceed rated capacity. Ensure that
the vehicle support points are fully captured
between the outer lugs of both jack stands.
Use a matched pair of jack stands per
vehicle to support 1 end only. Use 1 pair
per vehicle only. Failure to do so may
result in sudden loss of load, which may
cause personal injury and/or property
damage.
LOWERING THE JACK
!
To avoid crushing injuries and property
• Opening the release valve allows oil to flow
back into the reservoir. This releases
hydraulic pressure on the ram, which
results in lowering the saddle.
damage: Keep hands and feet clear of work
area when lowering load.
• Raise load high enough to clear the jack
stands, then carefully remove jack stands
(always used in pairs).
• With notched end of jack handle, SLOWLY
open the release valve by turning the
handle counterclockwise, but never more
than 1/2 full turn. If the load fails to lower:
HOW TO USE YOUR JACK
RAISING THE JACK
• With notched end of the jack handlle (see
Fig. 1) close release valve by turning the
handle clockwise.
• Chock the vehicle’s wheel with appropriate
devices to ensure lifting stability.
• Refer to the vehicle manufacturer’s owners
manual to locate approved lifting points on
the vehicle. Position jack so that the saddle
is centered under the load at an appropriate
lift point.
• Insert jack handle into handle sleeve. Pump
jack handle until saddle almost contacts the
vehicle. Check to see that the saddle is
centered and will contact the load lifting
point firmly.
a. Use another jack to raise the vehicle
high enough to reinstall jack stands.
b. Remove the affected jack and then the
stands.
c. Using the other jack, lower the load by
turning the operating handle counter-
clockwise, but no more than 1/2 full turn.
• After removing jack from under the load,
push saddle down to reduce ram exposure
to rust and contamination.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MAINTAINING OIL LEVEL
• When not in use, ALWAYS store jack with
saddle lowered all the way down.
Important: When adding or replacing oil,
ALWAYS use a good grade Hydraulic Jack
oil. We recommend Mobil DTE13M or
equivalent. DO NOT use Hydraulic Brake
Fluid, Alcohol, Glycerine, Detergent, Motor
Oil or dirty oil. Use of an improper fluid can
cause serious internal damage to your jack.
ANNUAL INSPECTION
To ensure that it is in optimum condition,
annual inspection of the jack at a Sears
Service Center is recommended.
REPLACING OIL
ADDING OIL
• To drain oil, remove cover plate and oil filler
plug and open release valve. Turn jack over
and drain old oil out through the oil filler
hole and into a suitable container.
Note: Dispose of hydraulic oil in accordance
with local regulations.
• Refill with new oil through the oil filler hole.
DO NOT allow dirt or foreign material to
enter the hydraulic system when filling.
• After refilling, remove any air from the
hydraulic system by opening the release
valve and rapidly pumping the jack handle
several times.
• Position the jack on level ground and fully
lower the saddle. (Ram will be all the way
in). Remove oil filler plug located under
cover plate (see Fig. 2).
• Oil should be filled to the level of about
3/16” above the inner cylinder as seen from
the oil filler hole. If low, add oil as needed.
• Re-install oil filler plug and cover plate. The
jack is now ready to use.
LUBRICATION
• Add lubricating oil to all moving parts as
needed.
• Re-install oil filler plug and cover plate and
the jack is ready to use.
PREVENTING RUST
• Check ram and pump plunger (see Fig. 2)
every few months for any signs of rust or
corrosion. Clean as needed by wiping with
an oily cloth.
Oil Filler Plug
Proper Oil Level
Ram all the way in
Release Valve
Plunger Down
FIG. 2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM-SOLVING HINTS
Possible Causes
Corrective Action
Symptom
Jack does not lift load
• Release valve not tightly closed
• Ensure release valve is tightly closed
• Overloaded - too much weight on jack • Reduce weight on jack
Jack bleeds off
• Release valve not tightly closed
• Ensure release valve is tightly closed
(starts to lower) after lift • Hydraulic unit malfunction
• Replace power unit assembly
• Drain fluid to proper level
Jack does not lower after • Oil reservoir overfilled
unloading
• Clean and lubricate moving parts
• Linkages binding
Poor lift performance
• Fluid level low
• Ensure proper fluid level
• Air trapped in system
• With ram fully retracted, open release
valve, pump handle several times to
expel trapped air
Does not lift to full
extension
• Fluid level low
• Ensure proper fluid level
PARTS
MODEL NUMBER: 50138
The Model Number and Serial Number are found on the lifting arm and handle socket
respectively. Always mention the Model Number and Serial Number when requesting service
or repair parts for your jack.
INDIVIDUAL PARTS ARE NOT AVAILABLE FOR REPLACEMENTASSMBLIES
Key
Description
1
7
2
6
1
2
Saddle
Power Unit Assembly
Handle Assembly
Front Wheel Assembly
Rear Castor Assembly
Cover Plate
3
4
5
3
6
4
7
Oil Filler Plug
—
––
Operators Manual
Warning Label
5
FIG. 3
For after sale support and assistance:
Call 8:00 AM - 4:45 PM CST., Monday - Friday 1-888-332-6419
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Get it fixed, at your home or ours!
Your Home
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME®
Call anytime, day or night
(1-800-469-4663)
(U.S.A. and Canada)
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts and Repair Center.
1-800-488-1222 Call anytime, day or night (U.S.A. only)
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6665 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
1-800-LE-FOYERMC
1-888-SU-HOGAR®
(1-888-784-6427)
(1-800-533-6937)
© Sears Brands, LLC
®
Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC
®
MC Marque de commerce / MD Marque déposée de Sears Brands, LLC
Download from Www.Somanuals.com. All Manuals Search And Download.
Operators Manual
JACK STANDS
Model 950176 - 2-1/4 Ton Capacity per pair
• Safety
• Assembly
• Operation
BEFORE using this product, read this manual
and follow all its Safety and Operating
!
instructions. Failure to do so may result in
personal injury and/or property damage.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Warranty
.....P. 2
Save these instructions
Safety instructions
Assembly
.....P. 2
.....P. 3
.....P. 3
Operation
.....P. 4
Maintenance
Service
.....P. 4
.....Back cover
WARRANTY
CRAFTSMAN ONE YEAR FULL WARRANTYRAFTSMAN ONE YEAR FULL
If this Craftsman product fails due to a defect in material or workmanship within one
year from the date of purchase, return it to any Sears store or other Craftsman outlet in
the United States for free replacement.
This warranty applies for only 90 days from the date of purchase if this product is ever
used for commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
SAVE THESE INSTRUCTIONS
For your safety, read and understand the information contained with and on the product.
• The owner and operator shall have an understanding of this product and safe operating
procedures before attempting to use this product.
• Instructions and safety information shall be conveyed in the operators native language
before use of this product is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use and misuse of the product.
If any doubt exists as to the safe and proper use of this product as outlined in the
factory authorized manual, remove from immediately. These jack stands must be
used as a matched pair to support one end of a vehicle only.
• Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged
parts are noted. If the product has been or suspected to have been subjected to a
shock load, discontinue use until checked out by a Sears service center. Owners and
operators of this equipment shall be aware that the use and subsequent repair of this
equipment may require special training and knowledge.
• It is recommended that an annual inspection be done by qualified personnel and that
any missing or damaged parts, decals, warning / safety labels or signs be replaced
with Sears authorized replacement parts only. Any jack stand that appears to be
damaged in any way, is worn or operated abnormally should be removed from service
immediately.
• Labels and Operators Manual are available from Sears.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
!
!
WARNING
ADVERTENCIA
• Study, understand, and follow all printed
materials provided with and on this
device before use.
• Leer, comprender, y seguir las
instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la
información de seguridad deben estar
comunicado en lengua del operador
antes del uso.
• Rated capacity is per pair! Do not
exceed rated capacity.
• Use as matched pair to support one end
of a vehicle only. Use only 1 pair per
vehicle.
• No seguir estas indicaciónes puede
causar daños personales o materiales.
• Use only on hard, level surfaces.
• Center load on saddle.
! SAFETY MESSAGE !
Be sure all tools and personnel are clear
before lowering load. No alterations shall
be made to this device. Only attachments
and/or adapters supplied by the
manufacturer shall be used. Lift only on
areas of the vehicle as specified by the
vehicle manufacturer.
• Jack stands are not to be used to
simultaneously support both ends or one
side of a vehicle.
• No alteration shall be made to this
device.
• Failure to heed these markings may
result in personal injury and/or property
damage.
INSPECTION
Inspect the Jack Stands before each use.
Do not use if bent, broken or cracked
components are noted.
ASSEMBLY
CARTON CONTENTS
RATCHET BAR
Inside the carton box, you will find:
1. Two jack stand frames.
2. Two ratchet bars.
PAWL (INSIDE,
NOT SHOWN)
LOCKING
HANDLE
3. Two lock pins.
BASE
FRAME
HOW TO ASSEMBLE JACK STANDS
(refer to Fig. 1)
LOCK PIN
1. Insert the ratchet bar into frame, orient
the racthet side to the pawl side of
frame.
2. Move the ratchet bar to lowest position
by raising the locking handle and guiding
the bar downward.
3. Support the ratchet bar with suitably
sized wooden block. With hammer and
punch or other suitable tool, drive the
lock pin into the hole at the bottom of
the ratchet bar to prevent overextension
and loss of the bar.
FIG. 1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
4. Always use jack stands as a pair and
BEFORE USE
only on those parts of a vehicle which
can be fully captured between the outer
lugs of each stand’s saddle.
1. Inspect stands before each use. Do not
use if bent, broken or cracked
components are noted. Ensure that all
parts move freely.
Rated capacity of jack stands is per
!
pair, it is NOT the sum of individual
capacities unless specifically noted to
the contrary by the jack stand
manufacturer. Do Not exceed rated
capacity. Ensure that the vehicle
support points are fully captured
between the outer lugs of both jack
stands. Use a matched pair of jack
stands per vehicle to support 1 end
only. Use 1 pair per vehicle only.
Failure to do so may result in sudden
loss of load, which may cause personal
injury and/or property damage.
2. Before using this product, read the
owner’s manual and familiarize yourself
thoroughly with the product and the
hazards associated with its improper
use.
KNOW YOUR JACK STANDS
SADDLE
RATCHET
BAR
LOCKING
HANDLE
5. Slowly and carefully lower the load
completely onto the stands, ensure that
the load is centered and captured as
described in Step 4.
6. Check to ensure that load is secure on
stands before working under vehicle.
JACK STAND
FRAME
FIG. 2
HOW TO USE YOUR JACK STANDS
TO SUPPORT A VEHICLE
1. Raise the vehicle or load with an
automotive jack.
TO REMOVE AND STORE JACK
STANDS
2. Adjust jack stand height by pulling up
on ratchet bar. The weight of the locking
handle should lock the ratchet bar into
a secure position. To verify this, simply
push down on the locking handle to
ensure that the ratchet bar is secured.
3. Carefully position the stands beneath
the load so that when load is lowered it
will contact the center of the jack stand
saddles.
1. Raise vehicle clear of stands with
suitable jack.
2. Raise the locking handle to allow ratchet
bar to glide down to lowest position.
3. Carefully remove stands.
4. Carefully lower vehicle with jack.
5. Ensure that all tools, equipment and
personnel are clear before lowering
load.
SPECIFICATIONS
CAPACITY
PER PAIR
MODEL
MIN. HEIGHT MAX. HEIGHT BASE DIMENSION NET WEIGHT(2 pcs.)
10-5/8 in.
(270mm)
17-1/8 in.
(435mm)
50176 2-1/4 TON
7-1/2 X 6-3/4 in.
11.4 LBS (APPROX.)
MAINTENANCE
STORAGE
INSPECTION
Store stands in upright position and in a
clean, dry area.
Periodically inspect each stand. Ensure all
parts move freely. Do not apply oil or
grease to any portion of this product. If rust
appears, sand affected area and cover with
suitable utility paint. Please note that there
are no replacement parts applicable to this
device.
For after sale support and assistance:
Call 8:00 AM - 4:45 PM CST., Monday - Friday 1-888-332-6419
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Get it fixed, at your home or ours!
Your Home
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME®
Call anytime, day or night
(1-800-469-4663)
(U.S.A. and Canada)
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts and Repair Center.
1-800-488-1222 Call anytime, day or night (U.S.A. only)
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6665 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
1-800-LE-FOYERMC
1-888-SU-HOGAR®
(1-888-784-6427)
(1-800-533-6937)
© Sears Brands, LLC
®
Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC
®
MC Marque de commerce / MD Marque déposée de Sears Brands, LLC
Download from Www.Somanuals.com. All Manuals Search And Download.
|