OWNER’S
INSTRUCTION MANUAL
TWO-LINE TYPE II
CALLER ID
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS............................................................. 2
USING YOUR TELEPHONE.............................................................................. 4
SET UP/INSTALLATION ............................................................................ 4
WALL MOUNT INSTRUCTIONS ............................................................... 5
FEATURES OF YOUR TELEPHONE .................................................................... 6
SETTING UP YOUR UNIT ................................................................................... 7
FACTORY PRESETS ................................................................................... 7
USING YOUR PHONE ...................................................................................... 9
RECEIVING A PHONE CALLS .................................................................. 9
PLACING A PHONE CALL ......................................................................... 9
SPEAKERPHONE BUTTON .................................................................... 10
DURATION COUNTER ................................................................................ 10
AUTOMATIC MEMORY .............................................................................. 10
TO STORE A PHONE NUMBER IN MEMORY .................................... 10
TO DIAL A PHONE NUMBER IN MEMORY ........................................ 11
VOLUME BUTTON ...................................................................................... 11
REDIAL BUTTON ........................................................................................ 11
PAUSE BUTTON ......................................................................................... 11
HOLD BUTTON ........................................................................................... 11
FLASH BUTTON ........................................................................................ 12
CALL WAITING DISPLAY ......................................................................... 12
MUTE BUTTON ......................................................................................... 12
RINGER VOLUME ..................................................................................... 12
TONE BUTTON ......................................................................................... 13
CONFERENCE BUTTON ........................................................................... 13
HEADSET COMPATIBLE ........................................................................... 13
CONTRAST BUTTON ............................................................................... 13
DATA PORT ............................................................................................... 13
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE DIRECTORY ................................................................................... 13
STORE NEW NUMBER AND NAME INTO DIRECTORY ............................. 14
FINDING ITEMS IN THE DIRECTORY .......................................................... 14
EDITING IN THE DIRECTORY ..................................................................... 14
DELETING ITEMS IN THEDIRECTORY ........................................................ 14
USING KEYPAD TO ENTER NAME............................................................. 15
USING THE CALLER ID FUNCTION ............................................................. 16
MESSAGE LIGHT .................................................................................... 16
MESSAGED WAITING .............................................................................. 16
RECEIVING CALLS.................................................................................. 17
REVIEWING CALLS ................................................................................. 17
CALLER LIST ............................................................................................ 18
DELETING CALLS ..................................................................................... 18
CALLBACK... ............................................................................................ 19
DIAL OPTIONS BUTTON ........................................................................... 19
MESSAGE ERROR ..................................................................................... 21
NO DATA SENT ......................................................................................... 21
PRIVATE CALLS ........................................................................................ 21
UNKNOWN CALLS .................................................................................... 22
TELEPHONE SERVICE PROBLEMS ................................................................. 23
IN CASE OF POWER FAILURE ......................................................................... 24
MAINTENANCE INFORMATION ....................................................................... 24
REPAIR OF YOUR TELEPHONE ................................................................... 25
THE FCC WANTS YOU TO KNOW ................................................................ 26
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANTSAFETYINSTRUCTIONS
Alwaysfollowbasicsafetyprecautionswhenusingyourtelephoneequipment
to reduce the risk of fire, electrical shock, and injury.
1.
Read and understand all instructions in the Owner’s Instruction
Manual.
2.
3.
Read all warnings and follow all instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Use a damp
cloth for cleaning. Do not use liquid or aerosol cleaners.
4.
Do not use the telephone near water. For example, do not use near a
bathtub, wash bowl, kitchen sink, laundry tub, swimming pool, or in a wet
basement.
5.
6.
Donotplacethisproductonanunstablecartorstand.Theproductmay
fall causing serious damage to the product.
Use only the type power source indicated on the label. If you are not
sure of the type power supply to your home, consult your dealer or local
powercompany.
7.
8.
Do not place any objects on the telephone line cord. Do not locate the
telephone where the line cord will be walked on.
Do not block or cover ventilation slots and openings in the bottom of
the telephone. The openings should never be blocked by placing the
telephone on a bed, sofa, rug, or other similar surfaces. This telephone
should never be placed near or over a radiator or heat register. This
telephone should never be placed in a built-in installation unless proper
ventilationisprovided.
9.
Never spill liquid on the telephone or push objects of any kind
throughventilationslots.Liquidorobjectsmaytouchdangerousvoltage
points or short out parts that could result in a risk of fire or electrical shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
10.
11.
Do not disassemble this product. Opening or removing covers may
exposeyoutodangerousvoltagesorotherrisks.Incorrectreassemblycan
cause electrical shock when the product is subsequently used.
Donotoverloadoutletsandextensioncords.Sometelephonesrequire
ACpowerfromanoutlet,overloadingtheoutletscanresultintheriskoffire
or electric shock.
12.
13.
14.
Avoidusingatelephoneduringalocalthunderstorm. Theremaybea
remote risk of electrical shock from lightning.
Do not use a telephone in the vicinity of a gas leak to report the leak,
orotherwise.
Unplug the telephone from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
•
•
•
When the line cord is frayed or plugs damaged.
Ifliquidhasbeenspilledintothetelephone.
If the telephone has been exposed to rain or water.
•
If the telephone does not operate properly by following the operating
instructions. (Adjust only those controls covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
•
•
If the telephone has been dropped or the housing damaged.
If the telephone exhibits a distinct change in performance.
15.
Incaseofpowerfailure,outgoingcallscanonlybemadeusingDTMF
dialing on Line 1.
SAVETHESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
3
USINGYOUR TELEPHONE
SET UP/INSTALLATION
1. Connect the adapter. Plug the large part of the adapter into the wall outlet and the
adapter tip into the jack at the rear side of unit. (Use only 9V DC. 300mA, center
positive Class 2 adapter.)
2. Connect the telephone line cord.
a. To connect without an answering machine.
• Use the new line cord to connect the PHONE jack of your new caller ID
phone to the modular wall jack.
Adapter
Modular
Wall Jack
b. To connect with an existing answering machine.
• Use the existing line cord supplied to connect the LINE jack of your
answering machine to the wall modular line jack.
• Use the new line cord supplied to connect the telephone jack of your
new Caller ID phone to the PHONE jack of your answering machine.
• Set your answering machine to answer the phone after 2 or more rings.
Answering
Device
Adapter
Modular
Wall Jack
3. Follow the procedure [Setting Up Your Unit ] to set up your unit.
4. Place the unit on a flat table or mount it on a wall. If you desire to place it on a wall,
use the wall mount bracket and short line cord supplied to accomplish the wall
mounting.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WALLMOUNT INSTRUCTIONS
1. Install wall mount bracket in wall mount position and route cords as shown in
diagram below.
2. Connect the adapter and the line cord. See Steps 2 & 3 on preceding page for
specific instructions.
3. Push out the handset hook and relocate it reversely to the wall mount position,
plug the coiled cord into the handset, and then plug the other end of the cord
into the case.
4. Place the handset on the base.
1
2
AC POWER
ADAPTER
Wall Jack
Wall
Wall Mounting Bracket Positions
Desk
Wall Jack Mounting Views
4
3
Desk top position
Handset Hook
Wall mount position
Download from Www.Somanuals.com. All Manuals Search And Download.
5
FEATURES OF YOUR TELEPHONE
1
Handset Hook
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Directory
2
Dial Button
Caller List
3
Options Button
Line 1 Button
Save
4
Delete
5
Conference Button
Handset Cord Jack
Line Cord Jack
Data Cord Jack
Hook Switch
Redial Button
10 Auto Memory Button
Ringer 1 Switch
Ringer 2 Switch
Headset Switch
Microphone
6
7
8
9
10
11
12
13
14
15
16
Volume/Edit Button
LCD Display
Mute LED
Flash Button
Mute Button
Green Message LED
Red New Call LED
Review Up/Down Button
Contrast
Speakerphone LED
Speakerphone Button
Hold Button
Line 2 Button
6
Download from Www.Somanuals.com. All Manuals Search And Download.
UNIT
SETTING UP YOUR
FACTORYPRESETS
, you must set the following options correctly
To ensure your telephone works properly
OPTIONS button.
To begin the setting sequence, press
before using your phone.
The following table shows you the factory default settings for your unit:
Setting
Display
Language
Area Code
Flash
English
4 Area Codes, No Setting
600 ms
Line 1
Tone Dialing
Line 1 / Line 2
Tone / Pulse
After the adapter is connected, the display will show as indicated below for setting.
will flash for
and “2. ESP”
. “1. ENG”
] appears on the display
1. [SET LANGUAGE
you to choose to view your message in English or Spanish. This will only flash for
a short time before going into standby mode.
(1)Press 1 to select ENG (English), or press 2 to select ESP (Spanish).
A check mark moves to the selection you have made.
DOWN button to confirm the selection, and the screen will display the
(2)Press
next setting option.
2. This telephone has been specially designed to allow programming of up to four
different area codes.
] appears, use the keypad 1-0 to enter the area
AREA CODE
(1) When [SET
code. After you finish all three digits, press
will be displayed for programming.
DOWN button to confirm,
ENTER 2ND CODE”
and the
(2) Use the same procedure as in step 1 to program the 2ND, 3RD and 4TH
area codes.
DOWN button can be used as a skip feature. For example, if there are only
(3) The
two area codes to be programmed, when “
appear, press the DOWN
ENTER 3RD CODE”
button to confirm, and
and “ENTER 4TH CODE”
the screen will display the next setting option.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
3. When [FLASH TIMER (MS)] appears, press EDIT button to set the desired
Flash Timer.
(1) Use LEFT button to decrease the timer by 50 ms. (Min. 100 ms)
(2) Use RIGHT button to increase the timer by 50 ms. (Max. 1000 ms)
(3) Press DOWN button to confirm, and the screen will display the next setting
option.
4. When [SELECT LINE1/2? ] appears, “1. LINE 1”and “2. LINE 2” will flash and you
may select line 1 or 2 as the prime line.
(1)The default setting for prime line is Line1. The prime line is the automatically
selected when the handset is lifted, or handsfree is pressed.
(2)Press 1 button to select LINE 1, or Press 2 button to select LINE 2. The
check mark moves to the selection you have made.
(3) Press DOWN button to confirm, and the screen will display the next setting
option.
5. When [DIAL MODE ] appears, 1. P (Pulse) and 2. T (Tone) will flash and you may
select Tone or Pulse Dialing.
(1) Press 1 button to select TONE, or Press 2 button to select PULSE. The
check mark moves to the selection you have made.
(2) Press DOWN button to confirm, and the screen will display the next setting
option, or press OPTION button to skip the programming.
Note: In order for the Caller ID callback to work (see Using the Caller ID
Function), you must set the PULSE/TONE switch to the Tone position.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
6. You have now completed the necessary programming.TOTAL:00 NEW:00”
appears in the display. This is the initial standby screen. The Date/Time is set
when a Caller ID call is received. This telephone will keep the current time accu
rately, and is updated each time a CID number is received. After you have set up
the unit completely for the first time, use the OPTIONS button to review or repro
gram the Language,Area Code, Flash Timer, Line Status or Dial Mode.
USINGYOUR TELEPHONE
RECEIVINGAPHONE CALL
1. Be sure the RINGER switch is set to the HI or LOW position.
2. When the phone rings and the callers information shows on the display window
(refer to Using the Caller ID Function), lift the handset or press the SPEAKER-
PHONE button and begin your conversation.
3. Set the Ringer switch to the OFF position when you do not want to be inter
rupted by the phone ringing.
PLACINGAPHONE CALL
1. Lift the handset or press the SPEAKERPHONE button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the
display window.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
SPEAKERPHONEBUTTON
1. Receiving Incoming Calls
a. When the phone rings and the caller’s information shows on the display
window (refer to Using the Caller ID Function), press and release the
Speakerphone button and talk normally into the built-in microphone from a
distance of 5-6 inches.
b. You can adjust the volume of the caller’s voice by pressing the VOLUME
button to obtain the desired volume level.
c. After the conversation has finished, press the SPEAKERPHONE button to
hang up.
2. To MakeACall
a. Press and release the SPEAKERPHONE button.
b. When you hear a dial tone, dial the number or press the auto memory
button just as you would on any other push-button telephone. The
number appears on the display window.
c. After the conversation has finished, press SPEAKERPHONE to hang up.
Note:
1. If you wish to switch from handsfree to handset, simply lift the handset.
2. If you wish to switch from handset to handsfree, press and release
SPEAKERPHONE and then hang up the handset.
DURATION COUNTER
A built-in counter will start counting for your reference 6 seconds after you lift the
handset or 6 seconds after you dial a telephone number.
AUTOMATIC MEMORY
To StoreANumber In Memory: (Telephone must be on-hook)
1. Press and hold the SAVE button for more than 2 seconds. [SAVE TO?]
appears display window.
2. Press the key (located on right-hand side of base) you want to store the
number. Then [ENTER NUMBER] appears on the display window.
3. Enter the number you want to store.After you complete the number, press the
SAVE button. Then [ENTER NAME] appears on the display window. Use
the keypad to input the name associated with the number. (See page 15 for
instructions.)
4. Press the SAVE button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
To DialAPhone Number In Memory
1. Lift the handset or press speakerphone and wait for a dial tone.
2. Press any memory location.
•
To dial an auto memory button (located on right-band side of base) - Press
the desired auto memory button (1, 2, 3.... or 10).
3. The number will be displayed and dialed automatically.
VOLUME BUTTON
A built-in amplifier feature allows you to increase the listening volume when speaking
with your party. When needed, press the VOLUME button to achieve different levels.
The volume will go back to default after you hang up the handset. Default volume is mid-
level.
REDIAL/PAUSEBUTTON
1. If the number you dialed is busy, or you want to call the last number dialed
again, press and release the hookswitch for a new dial tone.
2. Press REDIAL. The number will appear on the display window.
3. The last number called will automatically be redialed.
The PAUSE button allows you to insert a 3.6-second pause in the dialing sequence.
This is particularly useful if you are connected to a PABX system where you must
dial an access code (usually the number 9) to obtain an outside line.
1. Press the PAUSE button once and release at any point in the dialing sequence
where a pause is desired.
2. The PAUSE button can be pressed more than once to create a longer pause.
HOLD BUTTON
1. To place a call on hold, press the HOLD button. The Line LED will then flash.
Press the Line button being used to release Hold.
2. ToAnswer a Call on the other line while speaking on one line. Place the current
line on hold. Press the ringing Line button, Line 1 or Line 2. If you want the
second call to join you in a three-way conference, press the CONF.
3. To Place both calls on hold press the Hold button and both lines will be on
hold at the same time. The Line/Hold LEDs will light. To cancel hold for only
one line press the desired line button (Line 1/2). The other line will remain on
hold.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASHBUTTON
This telephone provides a break signal for a PABX service of Call Waiting from your
local telephone company. The Flash time is programmable from 100ms to 1000ms, in
50ms increments. You can change the flash time in the setup procedure. The default
Flash time is 600ms. If you have Call Waiting service, you can alternate the Call Waiting
function per the following instructions.
1. While having a conversation, another party calls and you hear a tone.
2. Press the FLASH button once and release. The first conversation is placed
on hold and the second call can be answered.
3. Press FLASH button again and release. The first caller can be spoken to
again and the second call is placed on hold.
Note: If you also have subscribed to Call Waiting Caller ID service, please see Call
Waiting Display below
CALL WAITING DISPLAY
In the past, if you had call-waiting service, a tone alerted you there was a new call
coming while you were on an existing call. Now our Call Waiting Caller ID not only tells
you there is another call waiting, but lets you know who the caller is before you answer
it. The call waiting information is shown on the unit’s display. The CALL WAITING (CW)
symbol will flash for 16 seconds along with the telephone number and name of the
person who is on call waiting. Press the FLASH button to put the existing call on hold
and answer the new call.
No matter whether you answer the call or not, the Call Waiting Caller ID will store the
call information for future reference.
Note: Make sure you have subscribed to both Call Waiting Caller ID and Caller ID
service from your local telephone company. If you only have Caller ID service, the
unit works for Caller ID only.
MUTEBUTTON
Press MUTE to speak without the person on the phone hearing your conversation. The
MUTE Indicator will light up and remain lighted until you resume your conversation. To
resume your conversation, press MUTE. The MUTE indicator will go out and your call
can continue.
RINGER VOLUME
Use the Ringer Volume controls located on the right side of the phone base to
change ringer volume for Line 1 and Line 2. The 3-position switches are used to set
ringer volume to Off, Low or Hi. Remember to set the Ringer switches to Hi or Low when
you want to receive calls.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFERENCEBUTTON
1. To establish a three-way conference call, press HOLD while talking on one line.
The first conference person is on Hold, the HOLD LED will light.
2. Press Line 1 or Line 2 whichever is not being used. Listen for dial tone. Dial the
telephone number of the second person.
3. Press the conference button. You may now speak to the first and second per
son simultaneously. To place both calls on hold, press the hold button while in confer
ence. To cancel hold for one line, press the desired line.
Note: The first person is automatically released from hold after pressing the con
ference button.
4. Replace the handset in the cradle to disconnect both lines. To stay connected to
only one line, press the desired line. The other line will be disconnected.
5. After conference call, press Line 1 or Line 2 to cancel conference call.
TONE BUTTON (*)
If the PULSE/TONE switch is set to the PULSE position, and you want to make a tone
dialing call after pulse dialing, press the TONE button on the dialing keypad, then
dial the number. The number dialed out will be changed to tone dialing automatically
without setting the PULSE/TONE to TONE position.
HEADSET COMPATIBLE
The slide switch must be located in the proper position for this feature to work. The
headset can be turned on and off by using the handsfree button.
Note: Use the Slide Switch located on the right side of the phone base to set On or Off.
CONTRAST BUTTON
The preset value is 3. you can change it to your preference by pressing CONTRAST
button to adjust to different levels of the display contrast.
DATAPORT
This is a connection which is in parallel with the telephone line. It allows the
connection of a device such as a modem, caller ID, or an answering machine. The
data port is across line 2.
USINGTHE DIRECTORY
This unit stores the numbers of up to 99 of your business associates, clients, contacts,
and friends in your Directory. You can dial these numbers by selecting them.
Names are sorted alphabetically starting with the first character. (If you want your
Directory sorted by the last name, enter the last name first.)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
TOSTOREANEWNUMBERANDNAMEINTOTHEDIRECTORY
1. Press and hold the SAVE button for more than 2 seconds. “SAVE TO” will appear on
display.
2. Press DIRECTORY. Then “”ENTER NUM” will appear on display.
3. Enter the telephone number you want to store.After you complete the number, press
SAVE. “ENTER NAME” will appear on display for two seconds. ( See page 15 for
instructions.)
4. Use the keypad to input the name associated with the number.
5. Press SAVE again to finish the store procedure.
FINDINGITEMSINTHEDIRECTORY
1. Press DIRECTORY to see the Directory List.
2. To move down and up the list, press UP or DOWN. Or you can press the appropriate
dial key to see the listings that start with a particular letter. For example: 55 takes you
to the first “JJ listing, the DOWN takes you to the next J listing. Pressing 555 takes
you to the first “KK” listing.
3. To leave the Directory at any time, press DIRECTORY.
EDITING IN THE DIRECTORY
1. Find the item you want to edit in the Directory list.
2. Press LEFT to start editing. After you change the number, press SAVE again.
3. You can also change the name and press SAVE to finish the editing procedure.
DIALINGTELEPHONENUMBERSFROMMEMORY
1. Find the number you want to dial in the Directory list. (Telephone can be On or Off
hook)
2. When the number shows on the display, press DIAL to start the dialing.
DELETING ITEMS IN THE DIRECTORY
Deleting individual item:
To delete an individual call, press the DELETE button twice. The display will be erased
line by line and the remaining items will be re-sorted.
Deleting all items:
To delete all items stored in the directory, press DIRECTORY to see the Directory List
heading, then press and hold the DELETE button for more than 4 seconds until “DELETE
ALL” appears in the display. Press the DELETE button again to confirm that you want to
delete all call records. “NO RECORDS” appears in the display confirming there are no
call records stored in memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
USINGKEYPADTOENTERNAME
You can program names to correspond with numbers you enter into the DIRECTORY or
memory locations. To program a name, find the dial pad key that has the first character
of the name. Keep watching the display as you press the key until the desired character
appears on the display. Press a different dial pad key or press the right EDIT button for
the next character. If the next character is on the same key, please wait one second to
accept the previous input. To insert a space, press the RIGHT edit button. To backspace
and erase a mistake, press the LEFT edit button.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
USING THE CALLER ID FUNCTION
MESSAGE LIGHT
An indicator marked NEW CALL will light and flash to let you know when there are new
calls received.
If you have a voice mailbox service with your telephone company, another indicator
marked MESSAGE will flash to alert you to dial your telephone company to check
your new messages.
MESSAGEWAITING
This unit’s MESSAGE WAITING DETECTION is for both FSK and StutterTone Systems.
IFYOURSERVICEISFSK:
1. If you have a voice mailbox service from the phone company, the MESSAGE
indicator will flash and [MESSAGE WAITING] will appear on the display for 20
seconds when a message waiting signal (on) from the Central Office is received.
2. The MESSAGE indicator will go off and [MSG WAITING OFF] will appear for 20
seconds if the message waiting off signal is sent from the Central office.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
IFYOURSERVICEISASTUTTERTONESYSTEM:
1. This unit will check your line for a stutter dial tone every time you hang up or
each time a call goes unanswered. The MESSAGE indicator will flash when
there is a message waiting.
2. You may experience some delay in seeing the MESSAGE indicator light up
even though there are messages in your rnail box. This delay is due to
regulatory matters and does not indicate a problem with the unit.
This unit may not he activated or deactivated under certain conditions. For example,
when you retrieve your message from an outside phone (not your own telephone
number), the MESSAGE indicator may not be canceled when you return home. If you
experience this situation, pick up the receiver and hang up. The MESSAGE indicator
will cancel.
RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will show
the NEW symbol, the phone number, the caller s name, and time and date of
the call for 20 seconds. The REPEAT symbol will appear if the call has
come in more than once.
2. After 20 seconds with no activity, the display will default to the Stand-By
screen and remain on until another call is received or a button is pressed.
This will show you the total number of calls stored and how many new calls
that have not been reviewed.
REVIEWING CALLS
1. When the NEW symbol is flashing on the Stand-By screen, you have new
incoming calls. Next to the NEW symbol is the total number of new calls.
Press CALLER LIST and the REVIEW UP or REVIEW DOWN button to
review the incoming stored calls.
2. The NEW symbol attached to each call will be removed after you review the
call.
3. If the NEW symbol is still flashing when the display goes back to the Stand-By
screen, there are new calls that you have not yet reviewed.
4. The reviewed number can be stored into any of the auto memory buttons or
keypad memory locations by pressing the SAVE button first, then one of the
memory buttons. Press the SAVE button to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
5. When you have reached the end of the call records, the display will indicate
[-END OF LIST- ] , confirming there are no more calls stored.
Note: If the telephone number received is more than 10 digits, the unit will only store
the first 10 digits into memory.
CALLER LIST
To store CID numbers into a Memory or Directory location, press the Caller List
button to review calls.
1. Select a CID number from the Caller List.
2. Press and hold the SAVE button for more than 2 seconds. “SAVE TO?” and
the CID number will appear on display.
3. Press the memory key or directory location where you want to store the number
“ENTER NUM” will appear on the display.
4. You can modify the number if you want or just press the SAVE button once.
“ENTER NAME” will appear on the display for two seconds. Then the CID name
will show on the display.
5. You can modify the name or just press SAVE to complete the procedure.
DELETINGCALLS
1. To delete an individual call: When reviewing calls, you can delete an
individual call by pressing the DELETE button twice. The display will be
erased line by line and the rest of the records will be renumbered.
2. To delete all calls: When reviewing calls, you can delete all calls by pressing and
holding DELETE for more than 4 seconds. Then [DELETE ALL]’will appear.
Press DELETE to confirm you really want to erase all records. [-NO CALLS-]
appears on the display to show there are no calls stored in memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
DELETEALL?
-NOCALLS-
CALLBACK
When reviewing received calls, there are two ways to dial the telephone numbers
shown on the display by pressing DIAL.
1. With the handset in its cradle (on-hook), press DIAL. The number will be dialed
using handsfree operation.
2. If you pick up the handset, review the calls, and press DIAL, the displayed
number will be dialed immediately.
Note: The HANDSET symbol will light up in the upper left hand corner of the LCD
display when the handset is picked up.
If a local call (a telephone number with the same area code as you set) is
reviewed and its 7-digit number displayed, press DIAL to dial the number
displayed.
If a long distance call (a telephone number with a different area code than
you set) is reviewed and its 10-digit number (3-digit area code + 7-digit
telephone number) is displayed, press DIAL to dial the number displayed.
DIAL OPTIONS BUTTON
The DIAL OPTIONS button allows you to change the format of the displayed number
The available format follows:
7-digit
10-digit
11-digit
7-digit telephone number.
3-digit area code + 7-digit telephone number.
Long distance code 1 + 3-digit area code + 7digit telephone number.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
If a local call, and its 7-digit number is displayed:
•
Pressing OPTIONS once will change it to a 10-digit format (your area code +
7digit number).
•
Pressing OPTIONS twice will change it to an 11-digit number (1 + your area
code + 7-digit telephone number).
• Pressing OPTIONS three times will go back to the original 7-digit telephone
number
Original
656-5756
Press Options Button Oncel
(914) 656-5756
Press Options Button Twicel
1+(914) 656-5756
The LCD can only display 10 digit telephone numbers, when you change the format
to 11-digits, only the first 10 digits can be seen, but it will dial 11-digits after you
press DIAL.
If a long distance call, and its 10-digit number is displayed,
1. Pressing OPTIONS once will change it to an 11-digit number (1+ 3-digit area
code + 7-digit telephone number).
2. Pressing OPTIONS twice will remove the 3-digit area code and change to
display only the 7-digit telephone number.
3. Pressing OPTIONS three times will go back to the original 10-digit number
4. For example: your own area code is 205, and you are reviewing telephone
number 914-656-5756.
When the desired format of the telephone number is reached, press DIAL to dial
the displayed number.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
MESSAGE ERROR
The display indicates “[- MESSAGE ERROR -]” if your unit receives a call that
has an error in the transmission or reception.
•
NO DATASENT
1. [-NO DATA SENT-] will be displayed if there is no caller ID (CID) number sent
from the telephone company while ringing.
PRIVATE CALLS
•
•
•
If the caller has exercised the option to block his number from being sent,
[PRIVATE NUMBER] and his name will alternately display on the screen when
this information is received.
If the caller has exercised the option to block his name from being sent,
[PRIVATE NAME] and his telephone number will be displayed on the
screen.
If the caller has exercised the option to block his name and number from
being sent, then [PRIVATE CALLER] will be displayed on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
UNKNOWN CALLER
•
•
•
When the telephone company is unable to provide information of the caller’s
telephone number, [UNKNOWN NUMBER] and his name will alternately
display on the screen when this information is received.
When the telephone company is unable to provide information of the caller’s
name, [UNKNOWN NAME] and his telephone number will be displayed on the
screen.
When the telephone company is unable to provide information of the caller’s
name and number, [UNKNOWN CALLER] will be displayed on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
TELEPHONESERVICEPROBLEMS
If you have any problems with your telephone equipment service, determine if
the problem is with your unit or the telephone company lines. BEFORE CALLING THE
TELEPHONE COMPANY, be aware that they may charge you for a service call if the
problem is caused by your telephone equipment.
PHONEDOESNOTRING
1. OFF/LOW/HI ringer switch is set to OFF position
2. Line cord is disconnected at telephone outlet or at telephone end.
3. Phone is OFF HOOK. Make certain the hookswitch is depressed when the
handset is in the cradle.
4. SPEAKERPHONE indicator is on. Turn off speakerphone.
NODIALTONE
Wire is disconnected at telephone jack or at wall jack. Test the telephone in a different
wall jack. If it works, the first jack may be defective.
HAVE DIALTONE BUT CANNOT DIALOUT
Check if the PULSE/TONE switch is in the correct position.
REDIALBUTTONDOESNOTFUNCTION
The telephone may have been momentarily disconnected from the telephone jack.
STATIC
Check to see if the coiled handset cord is loose. Try a different phone in the wall jack.
If you still get static, the problem is in the line. Call the telephone company.
BLANKSCREEN
Check if the adapter is connected properly
CALLERSARENOTDISPLAYEDONTHESCREEN
1. Verify that you have subscribed to the appropriate service (Caller ID and Call
Waiting Caller ID) from your telephone company. If you only subscribed to the
Caller ID service this unit will not display the call waiting caller ID information.
2. Check if your answering machine is set to answer the call before 2 rings.
NO CALLER INFORMATION IS DISPLAYED WHEN HEARING THE CALLWAITING
AUDIOSOUND
1. Verify that you have subscribed to the Call Waiting Caller ID service from your
telephone company.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
MESSAGE ERROR HAPPENS FREQUENTLY
1. Caller information was not transmitted properly. Check with your telephone
company to see if there is a problem with your phone line.
Since our special design will always retain your stored call records, we
encourage you to disconnect all the telephone cords and adapter; and then
reinstall the unit step by step per this instruction manual before you ask for
service.
SPECIAL NOTE: The call records will not be erased when the adapter is
disconnected. Aspecial E2PROM design allows the unit to always retain your stored
call records after you disconnect the adapter
INCASEOFPOWERFAILURE
If AC Power is lost, outgoing calls can only be made using DTMF dialing on
Line 1.
MAINTENANCEINFORMATION
Treat your telephone equipment with care for trouble-free performance. Avoid
dropping the handset. Carefully place the handset on-hook after use.
Avoid putting near heating appliances and devices that generate electrical noise
(for example, motors and florescent lamps).
Clean your telephone equipment with a damp cloth. Stains may be removed
with a mild soap. Do not use liquid or aerosol detergents or cleaning agents.
Do not expose to direct sunlight or moisture.
Retain the original package in case you need to ship it at a later date.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
REPAIR OF YOUR TELEPHONE
DO NOTATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Call Waiting Caller ID
Telephones manufactured by CORTELCO must be returned to us for repair.
You can return your telephone to CORTELCO for repair or replacement in
accordance with our LIMITED WARRANTY.
DATE-OF-PURCHASE CORTELCO warrants THIS PRODUCT against defects in
material and workmanship in accordance with our LIMITED WARRANTY. If your
telephone is returned for repair, include a copy of your sales receipt containing the
date-of-purchase. DONOTINCLUDETHEORIGINALSALESRECEIPT.
If date-of-purchase is not included, the factory date printed on the label on the
bottom of your telephone will be used as the date-of-purchase. The factory date allows
six months for distribution and sale of this product.
If you return your telephone for repair, the warranty period is not extended. The
original date-of-purchase continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after the
LIMITED WARRANTY has expired if you send it to us in a complete and undamaged
condition. The repaired Call Waiting ID will be shipped to you C.O.D., freight collect.
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair, package
it carefully, preferably in the original carton. Be sure to include your return address, a
copy of the sales receipt showing date-of-purchase, and a note describing the problem
you have with your Call Waiting Caller ID Telephone. Shipping must be prepaid. If the
telephone is in warranty, it will be repaired or replaced, at our option, at no cost to you,
and it will be returned shipping prepaid.
Ship your Call Waiting Caller ID (shipping prepaid) to:
CORTELCO
REPAIRCENTER
1703 SAWYER ROAD
CORINTH, MS38834
Download from Www.Somanuals.com. All Manuals Search And Download.
25
THE FCC WANTS YOU TO KNOW
Part 68 is a Federal regulation which requires equipment to be tested and registered
with the FCC prior to its connection to the network. This equipment complies with Part
68 of FCC rules. On the bottom of the telephone is a label that contains, among other
information, the FCC Registration Number and the Ringer Equivalence Number (REN) for
this equipment. You must, upon request, provide this information to your telephone
company.
The Ringer Equivalence Number, which is used to determine the number of devices
you may connect to your phone line, indicates the amount of power that your telephone
draws from the telephone company line during ringing. If you have more than one
telephone (or other terminal device) connected to the telephone company line, you
should total the ringer equivalence numbers (REN s), and be sure that the total is not
more than five. Your telephones may not ring if the total is more than five.Also, in some
rural locations, your telephone may not ring if the REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin-operated lines or party
lines.
INSTALLATION This model telephone must be connected to the telephone company
lines through a modular jack. The required USOC for the modular jack is RJ11C for desk
mounting and RJ11W for wall mounting. The USOC number is printed on the label on the
bottom of your telephone.
HEARING-AID COMPATIBILITY The handset on your telephone will work with mag-
netically-coupled hearing aids. You can use a hearing aid equipped with a T (Telephone)
switch.
IN CASE OF TROUBLE If your telephone should cause problems on the telephone line,
the telephone company can temporarily disconnect your service. The telephone com-
pany must then notify and allow you to correct the problem.
The telephone company may from time to time change its lines or equipment. They must
notify you if planned changes will affect your telephone service, to allow you to take
steps to prevent interruptions.
Part 15 regulates the electromagnetic energy emitted by equipment to minimize interfer-
ence to radio, television, and other wirless devices. This telephone complies with Part
15 of the FCC Rules. In the unlikely event that interference occurs, move the telephone
and/or radio, television, etc. to increase the separation distance.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
LIMITEDWARRANTY
If this product was purchased by you new in the U.S. or Puerto Rico,
CORTELCO warrants it against defects in material and workmanship for a
period of one (1) year from the date of original purchase. This warranty is in
lieu of all other express warranties. During the warranty period, CORTELCO
agrees to repair or, at its option, replace the defective product, or any part of
it without charge for parts or labor. This is your exclusive remedy. This war-
ranty does not cover damage resulting from accident, misuse, abuse, im-
proper installation or operation, lack of reasonable care, the affixing of any
attachment not provided by CORTELCO with the product and loss of parts.
The warranty is voided in the event any unauthorized person alters or repairs
the unit.
Telephone companies use different types of equipment and offer various
types of services to customers. CORTELCO does not warrant that this
product is compatible with the type of equipment of any particular
phone company or the services provided by it.
CORTELCO DISCLAIMSANYIMPLIED WARRANTY, INCLUDINGTHE WAR-
RANTY OF MERCHANTABILITYANDTHE WARRANTYOF FITNESS FORA
PARTICULARPURPOSE,ASOFTHEDATEONEYEARFROMTHEORIGINAL
PURCHASEOFTHEPRODUCT.CORTELCOASSUMESNORESPONSIBILITY
FORANYSPECIAL, INCIDENTALORCONSEQUENTIALDAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS,AND YOU MAY
HAVEOTHERRIGHTSWHICHVARYFROMSTATETOSTATE. SOMESTATES
DONOTALLOWTHEEXCLUSIONORLIMITATIONOFSPECIAL, INCIDENTAL
OR CONSEQUENTIALDAMAGES OR LIMITATIONS ON HOW LONGAN IM-
PLIED WARRANTYLASTS, SOTHEABOVE EXCLUSIONAND LIMITATION
MAY NOTAPPLYTO YOU.
If failure occurs and your Call Waiting ID is in warranty, service shall be
provided by returning it to CORTELCO - Repair Center, 1703 Sawyer
Road, Corinth, Mississippi 38834, shipping prepaid. The product will
be repaired or replaced if examination by us determines the product to be
defective. Call Waiting IDs received damaged as a result of shipping will
require you to file a claim with the carrier.
2220
COLLEAGUE
Rev.01
Download from Www.Somanuals.com. All Manuals Search And Download.
|