|
122000TP227S
USER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE LIST
1. Large, backlit LCD with adjustable contrast
2. Two-line function
3. Memory Dialing
a. 5 One-touch Memory buttons
b. 5 Two-touch Memory buttons
c. 70 Entry Directory (Stores name and number)
4. Stores 50 incoming calls
5. Stores 15 outgoing calls
6. Caller ID Type 2 (Caller ID on Call waiting)
7. Message Waiting Indicator
a. FSK
b. Stutter Dial Tone
c. 90V
d. 24V
8. Three-way conference call
9. Enhanced Redial (Redial any of last 15 numbers dialed)
10. Call back function
11. Clock and Calendar
12. Long Distance Access Code (LDS Code)
13. Adjustable Ringer Volume and Cadence
14. Call Timer
15. Three languages (English, French and Spanish)
16. Mute, Flash, Pause function
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE LIST
17. Speakerphone
18. 2.5mm Headset jack
19. Headset Button with Indicator
20. Speaker volume selection
21. Hold function
22. Date/ Hour format setting
23. Desk/wall mounting
24. Data port
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETYINSTRUCTIONS
To reduce the risk of fire, electrical shock, and injury, please follow
thesebasicsafetyprecautionsbeforeyouusethisequipment.
1. Carefullyreadtheinstructionsinthismanual.
2. Followall warnings andinstructionsmarkedon theunit.
3. When cleaning, unplug the telephone jack from the wall outlet
and unplug the power adapter. Use a damp cloth. Do not use
liquidoraerosolcleaners.
4. Do not use this equipment near water e.g.: near a kitchen sink,
bathtub, washbowl, laundry tub, swimming pool or in a wet
basement.
5. Install in a protected location. Ensure all lines and cords are away
from foot traffic. Do not place objects on the line cord that may
causedamageorabrasion.
6. Avoid spilling any liquid on the unit. This may cause internal
shorting, fireorshock. Otherwise, thephoneisnotcovered
underyour warranty.
7. Do not overload wall outlets and extension cords as this can
result in the risk of fire or electrical shock.
8. Never push objects of any kind into this telephone as they can
touch dangerous voltage points or short out parts that could
result in a risk of fire or electrical shock.
9. Take the phone to a qualified technician when it requires repair
work or service. To reduce the risk of electrical shock, do not
disassemble the telephone. Opening or removing covers can
expose you to dangerous voltages or other risks. Incorrect re-
assembly can cause electrical shock during subsequent use.
10. Avoidusingthetelephoneduringan electrical storm. Therecan
be aslight riskofelectrical shockfromlightning.
11. Do not use the telephone to report a gas leak, if in the vicinity of
theleak.
12.Unplug this telephone from the wall outlet and refer servicing to
qualifiedservicepersonnelunderthefollowingconditions:
l If liquid is spilled into the unit.
l If the unit is exposed to rain or water.
l If the unit does not operate normally by following the
operating instructions.
l If the unit is dropped or the casing is damaged.
l If the unit exhibits a distinct change in performance.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Box Contents
The box should contain the following items.
l Telephone Base
l Telephone Stand
l Handset
l Handset Cord
l Line Cords(2)
l Power Supply (Transformer)
l User Manual
If any of these items are missing, contact your seller.
Installation - Wall
1. Remove the handset hook and reverse it so that it will hold
the handset.
2. Plug the line cord into the LINE jack on the base of the
telephone.
3. Plug the other end of the line cord into the telephone jack in
the wall.
4. Plug the power supply into the power supply jack on the base
of the telephone.
5. Plug the power supply into an AC wall outlet.
6. Mount the telephone on the wall jack. Be careful when
routing the cords so as not to interfere with the mounting.
7. Plug the handset cord into the handset.
8. Plug the other end of the handset cord into the handset jack
on the side of the telephone.
9. Hang the handset on the telephone.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation - Desk
1. Mount the desk stand to the telephone.
2. Plug the line cord into the LINE jack on the base of the
telephone.
3. Plug the other end of the line cord into the telephone jack in
the wall.
4. Plug the power supply into the power supply jack on the base
of the telephone.
5. Plug the power supply into an AC wall outlet.
6. Plug the handset cord into the handset.
7. Plug the other end of the handset cord into the handset jack
on the side of the telephone.
8. Place the handset on the telephone.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
23 24
M1
M2
M3
M4
M5
25
1
22
21
19
18
20
17
7-10-11
MENU
RELEASE
DELETE
DIAL/OK
2
3
4
5
6
7
8
CONFERENCE
VOICE MAIL
16
15
14
LINE
1
2
SHIFT
STORE
MUTE
LINE
HEADSET
HOLD
9
26
FLASH
VOL.
VOL.
13
10
11
SPEAKER
REDIAL/P
12
1. Memory buttons (M1~M5)
2. DIAL/OK button
3. DELETE button
15. STORE button
16. SHIFT button
17. MENU button
18. 7-10-11 button
4. VOICE MAIL button
5. CONFERENCE botton
6. LINE 1 button
19. RELEASE button
20. DIRECTORY button
21. Up & Down controls
22. Hook switch
7. LINE 2 button
8. HEADSET button
9. HOLD button
23. New call/24V MESSAGE
indicator
10. SPEAKER button
11. REDIAL/P button
12. FLASH button
24. Ringer/90V MESSAGE
indicator
13. Volume controls
14. MUTE button
25. LCD display
26. Handset
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset jack
Power jack
L1/L2
L2/DATA
Telephone
line jack
24V OFF 90V
MESSAGE
indicator
switch
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION BUTTONS
1. Receiver or Speaker Volume Control - To adjust the receive
volume in either the handset or speaker, press VOL.- or VOL.+.
There are 8 steps of adjustment.
2. Makingacall
a. Usinghandset
1. Pick up the handset, then LINE1 LED will light. If you use LINE2 and
pressLINE2button, thentheLINE2LEDwilllight.
2. Afteryouhearadialtone, enterthetelephonenumber.
3. Toendthecall, simplyreplacethehandsetinthecradle.
b. Usingspeakerphone
1. Press the SPEAKER button or LINE1 button, then LINE1 LED will
light. If you use LINE 2, press LINE2 button, then the LINE2 LED will
light.
2. Afteryouhearadialtone, enterthetelephonenumber.
3. Toendthecall, presstheSPEAKERbutton.
c. Switchingacallbetweenhandsetandspeakerphone
During a call with handset, to switch your call to speakerphone, press
SPEAKER button then hang up the handset. In this mode, you can
makeoransweracall. Toswitchback, simplyliftthehandset.
3. Receivingacall
When a call is received, the phone rings, and LINE1 or LINE2 LED will
flash. Also theLCDshowsthecaller IDnumber.
If LINE1 LED flashes, press LINE 1 button or pick up the handset or
pressSPEAKERbutton toanswer.
If LINE2 LED flashes, press LINE 2 button or pick up the handset or
presstheSPEAKERbutton toanswer.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Pre-dialling
a. In standby mode, enter the number you want to dial. You can
pressDELETE buttontoclear theincorrectdigit.
b. If you want to dial out the number through LINE1, press the LINE1
orSPEAKERbuttontodialoutthenumber.
c. If you want to dial out the number through LINE 2, press LINE2
buttontodialoutthenumber.
5. Hold
a. Puttingacallonhold
During a call, you can press HOLD button to put a call on hold, the
LCDwillshowLXHOLDING (X=1~2)thentherelevant LEDwillflash.
b. Cancellingacallonhold
1. When LINE1 is on hold and LINE2 is in standby mode, pick up the
handsetorpress LINE1buttontocancelthecall onhold.
2. When LINE2 is on hold and LINE1 is in standby mode, pick up the
handsetorpress LINE2buttontocancelthecall onhold.
6. Switchoverbetweentwolines
Therearetwooperation modes.
1. During a call on LINE1 pressing the LINE2 button will place LINE 1
on hold and connect LINE2. You may also press the HOLD button
firstandthenpressthe Line2button.
2. During a call on LINE2 pressing the LINE1 button will place LINE2
on hold and connect LINE1. You may also press the HOLD button
firstandthenpressthe LINE1button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES:
1. After pressing the HOLD button, the corresponding line will be
placed on hold and the LINE button will blink. The handset can
nowbeplacedonhookwithoutdisconnectingtheline.
2. To continue the conversation, pick up the handset and press the
LINE1orLINE2button.
7. Three -wayConference
Therearefivewaystoestablish athree-wayconferencecall.
Method1:
a. Establish a call on LINE1.
b. Place LINE1 on hold.
c. Establish a call on LINE2.
d. Press the CONFERENCE button.
Method2:
a. Establishacall onLINE2.
b. Place LINE2 on hold.
c. Establish a call on LINE1.
d. Press the CONFERENCE button.
Method3:
a. Establish a call on LINE1.
b. Place LINE1 on hold.
c. Establish a call on LINE2.
d. Place LINE2 on Hold.
e. Press the CONFERENCE button.
Method4:
a. With a call established on LINE1, LINE2 rings.
b. Place LINE1 on hold.
c. Answer LINE2.
d. Press the CONFERENCE button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Method5:
a. With a call established on LINE2, LINE1 rings.
b. Place LINE2 on hold.
c. Answer LINE1.
d. Press the CONFERENCE button.
8. Headset - A headset with a 2.5 mm plug can be connected to the
1220. The jack is on the right side of the phone. Use HEADSETto take
thephoneonandoffhookwhileusingtheheadset.
9. Pause - This is used during memory dialing to temporarily pause
thedialingsequence.
10. RedialFunction
a. Go off hook (lift the handset, press SPEAKER, or press
HEADSET)
b. Press REDIAL (the last dialed number will be dialed).
11. Enhanced Redial
TheREDIALbuttonallowsyoutoaccessthelast15dialednumbers.
a. Press REDIAL (the last dialed number will be displayed)
b. Use s or t to select the desired number.
c. Go off hook (lift the handset, press SPEAKER, or press
HEADSET).
12. Flash - Pressing FLASH produces an interruption of the line.
This is normally used in conjunction with special features such as
Call Waiting. If you do not have any special features, pressing
FLASH may disconnect a call.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Mute - This deactivates the handset, headset or speakerphone
microphone. It allows you to talk without being heard by the distant
party. To use this feature, press MUTE. The display will show "MUTE".
Todeactivatethefeature, pressMUTE again.
14. Speaker - This button activates and deactivates the speaker
phone.
15. Delete - This button is used in various programming actions to
deleteitems. Itisdiscussedindetailwhenitisused.
16. Dial/OK - This button is used in programming to accept a
value and to dial out a displayed number.
17. Menu - This is discussed in detail in the next section.
18. Directory - This is discussed in Item 21.
19. Voice Mail - This dials the number for a voice mail service.
Programming instructions are given in the following section.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Memory Buttons - The 1220 has five Memory Buttons (M1- M5).
Eachcanstore2telephonenumbers.
a. Storing a number Must be done on-hook.
i. Press STORE.
ii. Dial the number to be stored.
iii. Press STORE.
iv. Enter the name to be stored and press STORE. Press
STORE if you do not wish to enter a name.
v. Use s or t to select the ring cadence for this number.
vi. Press STORE.
vii. Press the desired Memory Button. You may store an
additional number in this location by pressing SHIFT and
then pressing the Memory Button.
b. Editing a number It is not possible to edit a number. Simply
store another number in this location.
c. Reviewing a number While on-hook, press the desired
Memory Button to display the stored number. If no number
is stored, the display will say "MEMORY IS EMPTY".
d. Dialing a Number
i. Go off hook (lift the handset, press SPEAKER, or press
HEADSET)
ii. Press the desired Memory Button
e. Storing a Caller ID Record.
i. While on-hook, press s or t until the desired number is
displayed.
ii. Press and hold STORE until the last digit begins to flash.
iii. Press STORE two times.
iv. Use s or t to select the ring cadence for this number.
v. Press STORE.
vi. Press the desired Memory Button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Directory - Up to 70 names and numbers may be stored in
the Directory.
a. Storing a number Must be done on-hook.
i. Press MENU. The display will say DIRECTORY.
ii. Press DIAL/OK. The display will say REVIEW. Press s or t
until the display says ADD.
iii. Press DIAL/OK.
iv. Dial the number to be stored up to 20 digits.
v. Press DIAL/OK.
vi. Enter the name to be stored and press DIAL/OK. Press
DIAL/OK if you do not wish to enter a name.
vii. Use s or t to select the ring cadence for this number.
viii. Press DIAL/OK.
ix. Press DELETE to exit.
b. Editing a number - It is not possible to edit a number. Simply
store another number in this location.
c. Reviewing a number - Must be done on-hook.
i. Press DIRECTORY. The first directory entry will be shown.
ii. Press s or t to see the other entries.
iii. If the number is more than 13 digits an arrow will show on
the display. Press s or t to see the rest of the number.
d. Dialing a Number
i. Press DIRECTORY. The first directory entry will be shown.
ii. Press s or t until the desired entry is shown.
iii. Go off hook (lift the handset, press SPEAKER, or press
HEADSET). The number will be dialed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
e. Storing a Caller ID Record.
i. While on-hook, press s or t until the desired number is
displayed.
ii. Press and hold DIRECTORY until the last digit begins to
flash.
iii. Press DIAL/OK two times.
iv. Use s or t to select the ring cadence for this number.
v. Press DIAL/OK. Display shows SAVE OK.
vi. Press DIAL/OK two times.
f. Storing a dialed number. Any of the last 15 dialed numbers
may be stored into the directory.
i. Press REDIAL.
ii. Press s or t until the desired entry is shown.
iii. Press and hold DIRECTORY until the last digit begins to
flash.
iv. Press DIAL/OK two times.
v. Use s or t to select the ring cadence for this number.
vi. Press DIAL/OK. Display shows SAVE OK.
vii. Press DIAL/OK two times.
g. Deleting a number.
i. Press DIRECTORY.
ii. Use s or t until the number is shown on the display.
iii. Press DELETE once.
iv. Press DELETE again to confirm.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
22. 7-10-11 - This button changes the format of the displayed
number. Three formats are available:
7-Digit 7 Digit Telephone Number
10-Digit 3 Digit Area Code + 7 Digit Telephone Number
11-Digit 1 Digit Long Distance Code + 3 Digit Area Code + 7 Digit
Telephone Number
Example: Assume the local area code is 662 and a 7 digit local
number is displayed 555-1212.
Pressing the 7-10-11 button once will display the number plus area
code: 662-555-1212.
Pressing the 7-10-11 button again will add the LDS code (usually 1):
1662-555-1212
Pressing the 7-10-11 button again will show the 7 digit number:
555-1212
Note: This assumes that an LDS code has been programmed into
the telephone.
23. Release - To end a conversation, press RELEASE once. The
phone will go on-hook for 1.5 seconds and then go off hook again to
allowanothercall tobemade.
24. Message Waiting/New Call Lamp - This lamp above the display
will light to indicate a voice mail message. The 1220 is compatible
with four types of message waiting: 90V, 24V, Frequency Shift Keying
(FSK) and Stutter Dial Tone (SDT). Contact your telephone service
provider to determine the type of message waiting. For 90V or 24V
the type of message waiting is selected with a switch underneath the
phone. FSK message waiting will be detected automatically. SDT
message waiting must be activated in the menu. For these types of
message waiting, the switch should be in the OFF position. If the
phone is connected directly to a telephone line, the switch should be
in the OFF position. This lamp will flash to indicate a new call. To
stoptheflashing usethe s or t toreviewthecalls.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS
Many of the settings of the phone are controlled from the menu.
To access the menu, press MENU while the phone is on-hook.
The various menu settings are discussed in detail below.
1. Directory-Thisiscoveredintheprevioussection.
2. Factory Reset - When this is displayed, press DIAL/OK and then
press DIAL/OK to confirm. This will restore the phone to the original
settings. All memoryandCIDrecordswillbelost.
3. Pause Time - Press DIAL/OK to display the current pause time
value. Use s or t to adjust the time. This can be adjusted in 100
mSec intervals from 1 to 5 seconds(3600 mSec is the default value).
PressDIAL/OKtoconfirm.
4. Ringer Suppress - If this is selected, the phone will not ring until
after Caller ID is displayed. The first ring will be suppressed. To
select this feature, press DIAL/OK and then use s or t to toggle
betweenOFF andON. Press DIAL/OKtoconfirm.
5. Voice Mail - This allows you to enter a number to access your
voice mail. This number will be dialed when the VOICE MAIL button
ispressed.
a. When VOICE MAIL is displayed, press DIAL/OK. VOICE
NUMBER will be displayed.
b. Press DIAL/OK.
c. Enter the phone number for your voice mail.
d. Press DIAL/OK.
e. Press DOWN. VM PASSWORD will be displayed.
f. Press DIAL/OK.
g. Enter the password (PIN) for your voice mail.
h. Press DIAL/OK.
i. Press t. # 3 SEC PAUSES will be displayed.
j. Press DIAL/OK.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
k. Enter the number of 3 second pauses to be inserted between
dialing the voice mail number and the PIN. For example, if
you enter 2 here, the phone will pause 6 seconds.
l. Press DIAL/OK.
m. Lift the handset to end programming.
6. Set SDT - The 1220 can respond to Stutter Dial Tone Message
Waiting. If this is set to ON, the phone will go off hook briefly
after every call to check the dial tone. If it is stuttered, the
message lamp will be lit. To select this feature, press DIAL/OK
and then use s or t to toggle between OFF and ON. Press
DIAL/OK to confirm.
7. Hold Mode - The 1220 has two hold modes: NORMAL and PBX.
In Normal mode, the HOLD button will place the phone on local
hold. This call can be retrieved from any phone connected to the
line. In PBX mode, the HOLD button can be programmed to dial a
code to place the call on PBX hold. Please note there is no hold
indication in PBX mode. To select this feature, press DIAL/OK and
then use s or t to toggle between NORMAL and PBX. Press
DIAL/OK to confirm.
8. Select Line 1/2 - This selects the default line when the phone
goes off hook.
b. Press s or t to select L-1 or L-2.
c. Press DIAL/OK to confirm.
9. Set Access Code - This is a number that is dialed to access an
outside line when the phone is used behind a PBX.
a. Press DIAL/OK.
b. Dial the access code (up to 4 digits).
c. Press DIAL/OK to confirm.
d. Press s or t to continue with programming.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Date Format - This selects the format used to display the
date. To select this feature, press DIAL/OK and then use s or t
to toggle between MM-DD (Month-Day) and DD-MM (Day-Month).
Press DIAL/OK to confirm.
11. Hour Format - This selects the format used to display the
time. To select this feature, press DIAL/OK and then use s or t
to toggle between 12 hour and 24 hour format. Press DIAL/OK to
confirm.
12. Set Flash - This selects the length of time for the flash. To
select this feature, press DIAL/OK and then use s or t to toggle
between 600mSec, 300mSec, 120mSec, and 100mSec. Press
DIAL/OK to confirm. Note that 600mSec is the standard time for
North America.
13. Set Area and LDS - This sets the local area code and the
code used to dial a long distance number. These values are used
in conjunction with the 7-10-11 button.
a. Press DIAL/OK.
b. Enter the area code using the keypad. Do not press
DIAL/OK.
c. Enter the LDS code. This is 1 for North America.
d. Press DIAL/OK.
e. Press s or t to move to the next item.
14. Set Language - The 1220 supports English, French and
Spanish. To select this feature, press DIAL/OK and then use s or
t to select a language. Press DIAL/OK to confirm.
15. Set Time and Date - This allows manual entry of the date
and time. Please note that Caller ID will set these values. If you
have CID service, skip this step.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
a. Press DIAL/OK.
b. Enter the time and date using the keypad. The time must be
entered in 24 hour format. The setting sequence is hour,
minute, month, day, and year. Use the * key to delete any
incorrect values. After setting the year, the day of the week
will be set automatically.
c. Press DELETE to exit.
16. LCD Contrast - There are four values of LCD contrast from 1
(Lightest) to 4 (Darkest). To select this feature, press DIAL/OK
and then use s or t to select a contrast value. Press DIAL/OK
to confirm.
17. Set Ring - The 1220 has 10 ringer cadences and 4 ringer
volumes plus OFF.
a. Press DIAL/OK. Display says RING TYPE L1.
b. Press DIAL/OK. The phone will ring with the selected ring
type.
c. Use s or t to select a ring type.
d. Press DIAL/OK.
e. Press s. Display says RING VOLUME L1.
f. Press DIAL/OK.
g. Use s or t to select a ring volume.
h. Press DIAL/OK.
I. Press s. Display says RING TYPE L2.
j. Press DIAL/OK. The phone will ring with the selected
ring type.
k. Use s or t to select a ring type.
l. Press DIAL/OK.
m. Press s. Display says RING VOLUME L2.
n. Press DIAL/OK.
o. Use s or t to select a ring volume.
p. Press DIAL/OK.
q. Press DELETE twice to exit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID INFORMATION
A caller ID record consists of the following information:
Time and Date
Caller's Name and Number
* Note that this feature requires caller ID service from your telephone
company.
DISPLAY MESSAGES
msg
REPEAT
In addition to the Message Waiting light, an icon will appear in the
display whenever there are messages. This icon is "MSG". It will
remain until all messages have been cleared. The display will also
show MESSAGE WAITING at the bottom if there is a message. Note
that this requires voice mail service from a service provider.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TOTAL and NEW CALLS - The total calls are
displayed at the bottom of the screen. New
calls aredisplayedat thetopright.
NEW
02
9:52 9/12
TOTAL 04 MON
CALL #03
9:52 9/12
PRIVATE- If a caller has prevented his name
and number from being sent, the display
willshow PRIVATE.
PRIVATE
CALL
9:52 9/12
REPEAT
# 03
REPEAT - If a number calls more than once,
REPEATwill appear in the upper right of the
screen.
12274612345
9:52 9/12
END OF LIST - This message is displayed
when the end of the CID list has been
reachedwiththes or t arrow.
END OF LIST
CALL
#04
OUT OF AREA - This message will display
when a call is received from an area which
isnotprovidingcaller IDinformation.
9:52 9/12
OUT OF AREA
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID SYSTEM OPERATION
Note that a subscription to caller ID service is required.
New call indicator - The display will show NEW until all new calls
havebeenreviewed.
Review Call Records - Use s or t to scroll through the caller ID
records. If the number is longer than 13 digits, an arrow will show in
the right corner of the LCD. Use s or t to show the other digits. Use
s or t again to move to the next record. Records may be reviewed
quickly by holding s or t for approximately 3 seconds. At the end of
therecords, thedisplaywillshow ENDOFLIST.
Save Call Records - The phone stores 50 CID records. It drops the
oldest record to make room for new calls. Save specific calls by
deleting unnecessarycall records.
Delete Single Numbers or All Records - While on-hook use s or t
to select the number to be deleted. Press DELETE. The LCD will show
DELETE ?. Press DELETE again to confirm. To delete all records, press
and hold DELETE for 6 seconds. The LCD will show ALL DELETE ?.
PressDELETEtoconfirm.
CallBackfromCallerID
Off-Hook
1. Gooff-hook.
2. Uses or t toselectthenumbertobecalled.
3. Use7-10-11tomodifythenumberformat ifnecessary.
4. PressDIAL/OK.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Hook
1. Uses or t toselectthenumbertobecalled.
2. Use7-10-11tomodifythenumberformat ifnecessary.
3. PressDIAL/OK.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID ON CALL WAITING
When you subscribe to this feature from the telephone company,
the LCD will display the name and number of a second caller
while you are on a call.
Caller two's information
is displayed
Caller ID info displayed
Caller 1
Caller 1
436-1234
4
Caller 2
291-5678
Use the FLASH button to answer the second call.
Use the FLASH button again to return to the first call.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you have problems with your phone, please check below
forhelpfulhints:
BLANK OR
FAINT
SCREEN
l
l
Checklinecordandadapter.
CheckContrastsetting.
l
l
l
Besureyourcaller IDserviceisactive.
Donot answer thephonebeforetwo rings.
If the problem continues, contact the telephone
company.
CALLER ID
DOES NOT
WORK
l
l
Besuretheringerisnot off.
PHONE
WILL NOT
RING
There may be too many devices connected to the
phone line. Remove all other phones and see if this
phone will ring. If so, add devices back one by one
tofindtheproblemunit.
l
NO DIAL
TONE
Verifythat thelinecordisconnected.
l Verify that the line cord connection is correct and
tightly secured.
NO CHARACTERS
ON DISPLAY
l
Checkpower adapter.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE REPAIR
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF.
Telephones manufactured by CORTELCO must be returned to us
for repair. You can return your telephone to CORTELCO for repair
or replacement in accordance with our LIMITED WARRANTY.
CORTELCO warrants THIS PRODUCT against defects in material and
workmanship in accordance with our LIMITED WARRANTY. If your
telephone is returned for repair, include a copy of your sales
receipt containing the date-of-purchase. DO NOT INCLUDE THE
ORIGINAL SALES RECEIPT. If date of purchase is not included, the
factory date printed on the label on the bottom of your telephone
will be used as the date of purchase. The factory date allows six
months for distribution and sale of this product. If you return
your telephone for repair, the warranty period is not extended.
The original date of purchase continues to apply to your warranty.
We will repair this product for a nominal fee after the LIMITED
WARRANTY has expired if you send it to us in a complete and
undamaged condition. The repaired unit will be shipped to you
C.O.D., freight collect. If you are returning a unit to us for repair,
package it carefully, preferably in the original carton. Be sure to
include your return address, a copy of the sales receipt showing
date-of-purchase, and a note describing the problem you have
with your telephone. Shipping must be prepaid. If the telephone
is in warranty, it will be repaired or replaced, at our option, at no
cost to you, and it will be returned shipping prepaid. Ship your
telephone (shipping prepaid) to:
CORTELCO
REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto Rico,
CORTELCO warrants it against defects in material and
workmanship for a period of two years from the date of original
purchase. This warranty is in lieu of all other express warranties.
During the warranty period, CORTELCO agrees to repair or, at its
option, replace the defective product, or any part of it without
charge for parts or labor. This is your exclusive remedy. This
warranty does not cover damage resulting from accident, misuse,
abuse, improper installation or operation, lack of reasonable care,
the affixing of any attachment not provided by CORTELCO with the
product and loss of parts. The warranty is voided in the event any
unauthorized person alters or repairs the unit. Telephone
companies use different types of equipment and offer various
types of services to customers. CORTELCO does not warrant that
this product is compatible with the type of equipment of any
particular phone company or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE
WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, AS OF THE DATE TWO YEARS FROM
THE ORIGINAL PURCHASE OF THE PRODUCT. CORTELCO ASSUMES
NO RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSION AND
LIMITATION MAY NOT APPLY TO YOU.
If failure occurs and your telephone is in warranty, service shall be
provided by returning it to CORTELCO - Repair Center, 1703 Sawyer
Road, Corinth, Mississippi 38834, shipping prepaid. The product
will be repaired or replaced if examination by us determines the
product to be defective. Telephones received damaged as a
result of shipping will require you to file a claim with the carrier.
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION
Part 68 is a Federal regulation which requires equipment to be
tested and registered with the FCC prior to its connection to the
network. This equipment complies with Part 68 of FCC rules. On
the bottom of the telephone is a label that contains, among other
information, the FCC Registration Number and the Ringer
Equivalence Number (REN) for this equipment. You must, upon
request, provide this information to your telephone company.
The Ringer Equivalence Number (REN), which is used to
determine the number of devices you may connect to your phone
line, indicates the amount of power that your telephone draws
from the telephone company line during ringing. If you have
more than one telephone (or other terminal device) connected to
the telephone company line, you should total the RENs, and be
sure that the total is not more than five. Your telephones may not
ring if the total is more than five. Also, in some rural locations,
your telephone may not ring if the REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin
operated lines or party lines.
INSTALLATION This model telephone must be connected to the
telephone company lines through a modular jack. The required
USOC for the modular jack is RJ11C for desk mounting and RJ11W
for wall mounting. The USOC number is printed on the label on
the bottom of your telephone.
HEARING-AID COMPATIBILITY The handset on your telephone will
work with magnetically-coupled hearing aids. You can use a
hearing aid equipped with a T (Telephone) switch.
IN CASE OF TROUBLE If your telephone should cause problems
on the telephone line, the telephone company can temporarily
disconnect your service. The telephone company must then notify
and allow you to correct the problem. The telephone company
may from time to time change its lines or equipment. They must
notify you if planned changes will affect your telephone service,
to allow you to take steps to prevent interruptions.
This telephone complies with Part 15 of the FCC Rules. In the
unlikely event that interference occurs, move the telephone
and/or radio, television, etc. to increase the separation distance.
Download from Www.Somanuals.com. All Manuals Search And Download.
|