OWNER’S
INSTRUCTION MANUAL
CALLER ID TYPE II
MULTI-FEATURE TELEPHONE
MODEL 9125
Download from Www.Somanuals.com. All Manuals Search And Download.
Table Of Contents
IMPORTANT SAFETY INSTRUCTIONS................................ 5
TELEPHONE PART IDENTIFICATION ................................. 7
INSTALLATION .......................................................................... 9
BOX CONTENTS .............................................................................................................. 9
BATTERY INSTALLATION ............................................................................................. 9
DIALING MODE............................................................................................................... 9
WALL MOUNT ................................................................................................................. 9
DESK MOUNT ................................................................................................................ 10
ANSWERING MACHINE .............................................................................................. 10
RINGER VOLUME ......................................................................................................... 10
MODEMS AND FAX MACHINES ................................................................................ 10
UNIT SETUP .............................................................................. 11
BASIC OPERATION ................................................................. 13
RECEIVING A PHONE CALL ....................................................................................... 13
PLACING A PHONE CALL ........................................................................................... 13
PREDIAL ......................................................................................................................... 13
SPEAKERPHONE ........................................................................................................... 13
CALL TIMER .................................................................................................................. 13
FEATURE BUTTONS ............................................................... 14
END CALL BUTTON ..................................................................................................... 14
MUTE BUTTON.............................................................................................................. 14
FLASH BUTTON ............................................................................................................ 14
PAUSE BUTTON............................................................................................................. 14
CALL WAITING OFF ..................................................................................................... 14
HEADSET BUTTON ....................................................................................................... 14
HOLD BUTTON .............................................................................................................. 15
MEMORY 1, MEMORY 2, and MEMORY 3 BUTTONS .............................................. 15
Storing a number .............................................................................................. 15
Storing a Caller ID Record or Dialed Call ....................................................... 15
Dialing a number .............................................................................................. 15
REDIAL BUTTON .......................................................................................................... 15
CALL FORWARD ON..................................................................................................... 16
CALL FORWARD OFF ................................................................................................... 16
VOLUME BUTTON ........................................................................................................ 16
MENU BUTTON ............................................................................................................. 16
DELETE BUTTON .......................................................................................................... 16
SAVE BUTTON ............................................................................................................... 16
MESSAGE BUTTON ...................................................................................................... 16
CLEAR MSG BUTTON .................................................................................................. 16
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTRAST BUTTON .................................................................................................... 16
REPROGRAMMING NETWORK SERVICE BUTTONS ............................................. 16
SPEAKER BUTTON ....................................................................................................... 17
SPEED DIAL .............................................................................. 17
STORE NEW NUMBERS ............................................................................................... 17
Entering a number ............................................................................................ 17
Storing a Caller ID Record or Dialed Call ....................................................... 17
DIAL A NUMBER FROM MEMORY ............................................................................ 17
REVIEW THE CONTENTS OF A MEMORY BUTTON............................................... 17
PHONE BOOK ........................................................................... 18
ADDING AN ENTRY TO THE PHONE BOOK ............................................................ 18
REVIEWING PHONE BOOK ENTRIES ....................................................................... 18
DIALING FROM THE PHONE BOOK.......................................................................... 18
DELETING A PHONE BOOK ENTRY .......................................................................... 18
STORING A CALLER ID RECORD IN THE PHONE BOOK...................................... 19
CALLER ID ................................................................................ 19
RECEIVING CALLS ....................................................................................................... 19
PRIVATE CALLS ............................................................................................................ 19
CALLER ID ON CALL WAITING ................................................................................. 20
REVIEWING CALLS ...................................................................................................... 20
DELETING CALLS......................................................................................................... 20
CALL BACK .................................................................................................................... 20
TROUBLESHOOTING ............................................................. 21
TELEPHONE REPAIR ............................................................. 22
FCC INFORMATION ............................................................... 23
LIMITED WARRANTY ............................................................ 24
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Always follow basic safety precautions when using your telephone equipment to reduce
the risk of fire, electrical shock, and injury.
1.
2.
3.
Read and understand all instructions in the Owner’s Instruction Manual.
Read all warnings and follow all instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
4.
5.
6.
7.
8.
Do not use the telephone near water. For example, do not use near a bathtub, wash
bowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
Do not place this product on an unstable cart or stand. The product may fall
causing serious damage to the product.
Use only the type power source indicated on the label. If you are not sure of the
type power supply to your home, consult your dealer or local power company.
Do not place any objects on the telephone line cord. Do not locate the telephone
where the line cord will be walked on.
Donot blockorcoverventilationslotsandopenings inthebottomofthetelephone.
The openings should never be blocked by placing the telephone on a bed, sofa, rug,
orothersimilarsurfaces. Thetelephoneshouldneverbeplacednearoroveraradiator
or heat register. The telephone should never be placed in a built-in installation unless
proper ventilation is provided.
9.
Never spill liquid on the telephone or push objects of any kind through
ventilation slots. Liquid or objects may touch dangerous voltage points or short out
parts that could result in a risk of fire or electrical shock.
10.
Do not disassemble this product. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electrical shock
when the product is subsequently used.
11.
12.
13.
Do not overload outlets and extension cords. Some telephones require AC power
from an outlet. Overloading the outlets can result in the risk of fire or electric shock.
Avoid using a telephone during a local thunderstorm. There may be a remote risk
of electrical shock from lightning.
Do not use a telephone to report a gas leak in the vicinity of the leak.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
14.
Unplugthetelephonefromthewalloutletandreferservicingtoqualifiedservice
personnel under the following conditions:
•
•
•
•
When the line cord is frayed or plugs damaged.
If liquid has been spilled into the telephone.
If the telephone has been exposed to rain or water.
If the telephone does not operate properly by following the operating
instructions. (Adjust only those controls covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
•
•
If the telephone has been dropped or the housing damaged.
If the telephone exhibits distinct change in performance.
SAVE THESE INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE PART IDENTIFICATION
1 M essage Waiting Lamp
2 LCD
17 Dial Keys
18 Volume Down Button
19 Volume Up Button
20 Speaker On/Off Button
21 Shift Button
3 Hookswitch
4 M enu Button
5 Delete Button
6 Save Button
22 Redial Button
7 Direction Buttons
8 Enter Button
23 Speed Dial Buttons
24 M emory 3 Button
25 M emory 2 Button
26 M emory 1 Button
27 Hold Button
9 Speaker
10 End Call Button
11 Call Forward On Button
12 M ute Button
13 Flash Button
14 Pause Button
15 Call Waiting Off Button
16 Headset Button
28 Call Forward Off Button
29 Clear M essage Button
30 M essage Button
31 Contrast Button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE PART IDENTIFICATION
Back and Side
1 D at a J ack
2 R inger Volum e Sw it ch
3 Line J ack
4 A C A dap t er Jack
5 H eads et J ack
6 H ands et J ack
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
BOX CONTENTS
Verify that the following items are in the box.
•
•
•
•
•
•
•
Telephone
Handset
Handset Cord
Line Cord
3 AA Batteries
Power Adapter
Instruction Manual
BATTERY INSTALLATION
The 9125 telephone requires 3 AA size 1.5 V batteries for the LCD display. To install the
batteries, follow the steps below:
1.
2.
Remove the battery cover. The cover is located underneath your phone.
Insert 3 AA size 1.5 V batteries. Be careful to observe the polarity markings in the
battery compartment.
3.
Replace the battery compartment cover.
DIALING MODE
The 9125 dial mode switch is underneath the phone near the battery compartment.
•
•
•
If your telephone line supports touch-tone dialing, put the switch in the “T” position.
This is the default postion from the factory.
If your telephone line requires rotary (Pulse) dialing, put the switch in the “P”
position.
If you are unsure which system you have, set the switch to the TONE position. Lift
the handset. When you get a dial tone, dial a telephone number. If the dial tone
continues, move the switch to PULSE, and then dial the telephone number again.
Note: When in PULSE mode, holding the * key for approximately 3 seconds will switch
to Tone dialing for the duration of the call.
WALL MOUNT
1.
2.
The 9125 ships configured for wall mounting. No changes are necessry.
Connect the power adapter. The power adapter connects to the jack marked DC 9V
on the back of the phone. Plug the large part of the adapter into the wall outlet. Use
only a 9V DC. 300mA, center positive Class 2 adapter. The adapter is necessary for
LCD backlighting.
3.
Connectthelinecord. ThelinecordconnectstothejackmarkedTel. Lineontheback
of the phone.
Mount the phone on the wall jack.
Plug the coiled cord into the handset, and then plug the other end of the cord into the
handset jack.
Place the handset on the base
4.
5.
6.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DESK MOUNT
1.
2.
3.
Press in the two areas shown below to release the desk stand.
Rotate the desk stand into the desk mounting position as shown below.
Connectthepoweradapterandthelinecord.SeeSteps2and3intheWALL MOUNT
instructions.
4.
5.
Plug the coiled cord into the handset, and then plug the other end of the cord into the
handset jack.
Place the handset on the base.
ANSWERING MACHINE
1.
2.
3.
Connect the LINE jack of the answering machine to the wall telephone jack.
Connect the Tel. Line jack of the 9125 to the PHONE jack of the answering machine.
Set the answering machine to answer after 2 or more rings.
RINGER VOLUME
Set the Ringer Volume Switch to your desired loudness. This switch is on the back of the
9125. Ringer volume can be set to Hi, Low or Off.
NOTE: If the ringer volume is set to OFF, it is very easy to miss calls.
MODEMS AND FAX MACHINES
These devices may be plugged into the Data jack on the back of the 9125.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
UNIT SETUP
Use MENU to enter the setup screen.
1.
2.
Press MENU. PHONE BOOK appears on the display. The Phone Book is covered
in a later section.
Press . When CALL WAITING appears, press ENTER. Then use to toggle this
feature ON or OFF. If this is set to OFF, Caller ID information will not be displayed
for a Call Waiting call. Press ENTER to exit.
3.
4.
5.
6.
Press . When DATE FORMAT appears, press ENTER. Then use to select either
Month-Day (MM-DD) and Day-Month (DD-MM). Press ENTER to exit.
Press . When HOUR FORMAT appears, press ENTER. Then use to select either
12 hour or 24 hour time display. Press ENTER to exit.
Press . When SET FLASH appears, press to select between 600ms, 300 ms, 120
ms and 100ms. Press ENTER to exit.
Press . When SET AREA CODE appears, use the keypad to enter the area code in
which the phone will be used. This is necessary so that the # key can change dialing
formats (7 digits, 10 digits, 11digits).
7.
Press . When SET LANGUAGE appears, press to select between USA-UK
(English), FRENCH and SPANISH. Press ENTER to exit. Note that pressing
ENTER now returns the phone to the idle screen.
NOTE: If you have Caller ID service, the time will be automatically set. Use Step 8
only if you do not have Caller ID. If you wish to display the Day of the Week,
you will need to set the year since Caller ID does not include this.
8.
Press MENU. Then press or until SET TIME appears. Press ENTER to set the
time.
a. The “tens” digit in the hour is flashing. Use or to set this digit. Then press
ENTER.
b. The “ones” digit in the hour is flashing. Use or to set this digit. Then press
ENTER.
c. The “tens” digit in the minute is flashing. Use or to set this digit. Then press
ENTER.
d. The“ones”digitintheminuteisflashing. Use or tosetthisdigit. Thenpress
ENTER.
e. The “tens” digit in the month is flashing. Use or to set this digit. Then press
ENTER.
f. The “ones” digit in the month is flashing. Use or to set this digit. Then press
ENTER.
g. The “tens” digit in the day is flashing. Use or to set this digit. Then press
ENTER.
h. The “ones” digit in the day is flashing. Use or to set this digit. Then press
ENTER.
i. The “tens” digit in the year is flashing. Use or to set this digit. Then press
ENTER.
j. The “ones” digit in the year is flashing. Use or to set this digit. Then press
ENTER.
k. The cursor for the day of the week will begin flashing. Use or to toggle this
on or off.
l. Press MENU to return to the idle screen.
NOTE: LCD Contrast may also be set using the Contrast button on the LCD screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
9.
Press MENU. Then press or until LCD CONTRAST appears. Press ENTER to
set the contrast. Use or to set the contrast. There are 8 choices available. Press
ENTER to exit to idle screen.
10.
Press MENU. Then press or until BACK LIGHT appears. Press ENTER. The
display will show BACK LIGHT TIME. Press ENTER. The display will show the
back light time. Use or to select between 30 sec, 20 sec, 10 sec or OFF. Press
ENTER. The display will showBACK LIGHT TIME. Press or . The display will
show OFFHOOKLIGHT. Press ENTER. The display will show the light time. Use
or to toggle between FOR SECONDS (The light will remain on for the backlight
time) or ALL THE TIME (The light will remain constantly on). Press ENTER. Press
MENU.
NOTE: Backlighting will only function if the AC adapter is connected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
RECEIVING A PHONE CALL
When the phone rings, lift the handset, press HEADSET or press SPEAKER to begin
your conversation. You can adjust the volume of the caller’s voice by pressing the
Volume Buttons on the base of the telephone.
PLACING A PHONE CALL
1.
2.
Lift the handset, press HEADSET or press SPEAKER and wait for a dial tone.
Dial the telephone number you wish to call. The number will appear on the display
window.
PREDIAL
1.
While the handset is on hook, enter the desired telephone number using the key pad.
The number will appear in the display. To delete a digit or the entire number, press
ꢀ.
To dial the displayed number, lift the handset, press HEADSET or SPEAKER.
2.
SPEAKERPHONE
1.
Receiving Incoming Calls
a. When the phone rings, press and release SPEAKER and speak normally into
the built-in microphone from a distance of 5-6 inches.
b. You can adjust the volume of the caller’s voice by pressing the Volume Buttons
on the base of the telephone.
c. After the conversation has finished, press and release SPEAKER to hang up.
2.
Making A Call
a. Press and release SPEAKER.
b. When you hear a dial tone, dial the number or press a memory
button. The number will appear on the display window.
c. When your party answers, adjust the volume of the conversation by pressing the
Volume Buttons on the base of the telephone.
d. After the conversation has finished, press and release SPEAKER to hang up.
Note:
1.
2.
If you wish to switch from speakerphone to handset, simply lift the handset.
Ifyouwishtoswitchfromhandsettospeakerphone, pressandreleaseSPEAKERand
then hang up the handset.
CALL TIMER
Approximately 5 seconds after the beginning of a call, a call timer will appear on the
display.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE BUTTONS
END CALL BUTTON
To end a conversation, press END CALL. In handset mode, the phone will go on-hook
for 2 seconds and then go off hook again. This allows you to make another call. In
speaker or headset mode, the phone will go on hook.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation.
“MUTE” will show in the display. To resume the conversation, press MUTE.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX services or for use of
Call Waiting from your local telephone company. If you have Call Waiting service, you
can use the Call Waiting function per the following instructions.
1.
2.
While having a conversation, another party calls and you hear a tone.
Press FLASH once and release. The first conversation is placed on hold and the
second call can be answered.
3.
Press FLASH again and release. You may speak to the first caller again and the
second call is placed on hold.
PAUSE BUTTON
PAUSE allows you to insert a 3.6-second pause in the dialing sequence. This is particu-
larly useful if you are connected to a PABX system where you must dial an access code
(usually the number 9) to obtain an outside line.
1.
Press PAUSE and release at any point in the dialing sequence where a pause is
desired.
PAUSE can be pressed more than once to create a longer pause.
2.
CALL WAITING OFF
When you come off hook and press this button, the 9125 will dial *70. This is a standard
code to deactivate call waiting. For more information about call waiting, contact your
telephone company.
HEADSET BUTTON
The 9125 supports headsets with a 2.5 mm plug. Be sure you have a headset connected
to the headset jack before using the headset button.
1.
Receiving Incoming Calls
a. When the phone rings, press and release HEADSET and speak into the headset
mic.
b. You can adjust the volume of the caller’s voice by pressing the Volume Buttons
on the base of the telephone.
c. After the conversation has finished, press and release HEADSET to hang up.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Making A Call
a. Press and release HEADSET.
b. When you hear a dial tone, dial the number or press a memory
button. The number will appear on the display window.
c. When your party answers, adjust the volume of the conversation by pressing
the Volume Buttons on the base of the telephone.
d. After the conversation has finished, press and release HEADSET to hang up.
Note:
1.
2.
If you wish to switch from headset to handset, simply lift the handset.
If you wish to switch from headset to speakerphone, press and release SPEAKER.
HOLD BUTTON
1.
2.
Press HOLD and hang up the handset. HOLD will light and remain lighted until you
resume your conversation.
To resume your conversation, lift the handset or that of any extension phone on the
same line or press and release SPEAKER or HEADSET. The HOLD indicator will
go out and your call can continue.
MEMORY 1, MEMORY 2, and MEMORY 3 BUTTONS
Frequently dialed numbers may be stored in these buttons. Follow the instructions below
to store a number.
Storing a number
1.
2.
3.
Place the phone on hook.
Enter the number to be stored.
Press and hold the memory button until the display shows “SAVE OK.”
Storing a Caller ID Record or Dialed Call
1.
2.
3.
Place the phone on hook.
Usetheꢁorꢂkeytodisplaythedesirednumberfromincomingcallsordialedcalls.
Press and hold the memory button until the display shows “SAVE OK.”
Dialing a number
1. Come off hook.
2. Press MEMORY 1, MEMORY 2, or MEMORY 3. The number will be dialed out.
REDIAL BUTTON
1.
2.
To redial the last number dialed, come off hook and press REDIAL.
The selected number (32 digits maximum) will be redialed.
To review dialed numbers.
1.
2.
3.
While on hook, press REDIAL.
The display will show the last number dialed.
Use ꢁ orꢂ to scroll through the list of dialed numbers. The last 15 dialed numbers
are stored.
4.
To dial the displayed number, go off hook. The number will be dialed after
approximately 3 seconds.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL FORWARD ON
When you come off hook and press this button, the 9125 will dial *72. This is a standard
code to activate call forwarding. For more information about call forwarding, contact
your telephone company.
CALL FORWARD OFF
When you come off hook and press this button, the 9125 will dial *73. This is a standard
code to deactivate call forwarding. For more information about call forwarding, contact
your telephone company.
VOLUME BUTTON
A built-in amplifier feature allows you to change the listening volume on the handset,
headset or speaker. Press ꢀ- or + ꢃ to change the volume. There are 8 levels.
MENU BUTTON
Press this button to access the Phone Book or to enter setup mode.
DELETE BUTTON
Use this button to delete characters on the display.
SAVE BUTTON
Use this button to store numbers in memory or the Phone Book.
MESSAGE BUTTON
If you have a voice mail service, the large red indicator above the display will flash to
alert you that you have new messages. The display will also show an icon of an
envelope. The 9125 will only detect FSK message waiting signals.
Press MESSAGE to retrieve your messages. This button will dial out *98 which is a
common code to retrieve messages. If your service requires a different code, you can
program the MESSAGE button by following the instructions for programming speed
dial on the following page.
CLEAR MSG BUTTON
In most cases the message waiting indicators will go out shortly after you retrieve your
messages. If they do not, press CLEAR MSG to clear these indicators manually.
CONTRAST BUTTON
Contrast can be altered when on hook by pressing the Contrast button on the display.
There are 8 contrast levels.
REPROGRAMMING NETWORK SERVICE BUTTONS
CALL FORWARD ON, CALL FORWARD OFF or CALL WAITING OFF can be
reprogrammed if your telephone company requires a different code. Simply follow the
instructions for programming speed dial on the following page. If you do not have one
or both of these functions, these buttons may be used as additional one-touch memory.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER BUTTON
This button controls the speakerphone. Press once to activate the speakerphone. Press
again to deactivate.
SPEED DIAL
The 9125 can store up to 20 names and numbers in the memory buttons. Two names and
numbers can be programmed in each button.
STORE NEW NUMBERS
Entering a number
1.
2.
3.
Place the phone on hook.
Enter the number to be stored.
Press and hold the memory button or press SHIFT and then press and hold the
memory button until the last digit of the number blinks.
Press SAVE.
The cursor will blink in the name field below the number.
Use the keypad to enter the name or press SAVE to store with no name.
If a name was entered, press SAVE.
4.
5.
6.
7.
8.
The display shows “SAVE OK.”
Storing a Caller ID Record or Dialed Call
1.
2.
3.
Place the phone on hook.
Usetheꢁorꢂkeytodisplaythedesirednumberfromincomingcallsordialedcalls.
Press and hold the memory button or press SHIFT and then press and hold the
memory button until the last digit of the number blinks.
Press SAVE.
The cursor will blink in the name field below the number.
Use the keypad to edit the name or press SAVE to store as is.
If the name was edited, press SAVE.
4.
5.
6.
7.
8.
The display shows “SAVE OK.”
DIALA NUMBER FROM MEMORY
Go off hook, and press the memory button. The number will be dialed out. To dial the
second number stored in a location, go off hook, press SHIFT and then press the
memory button.
REVIEW THE CONTENTS OFA MEMORY BUTTON
While on hook, press the memory button or press SHIFT and then press the memory
button. The display will show the memory contents. To dial this number, go off hook.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONE BOOK
The phonebook can store up to 70 names and numbers.
ADDING AN ENTRY TO THE PHONE BOOK
1.
2.
3.
4.
5.
6.
7.
8.
Press MENU.
The display will show PHONE BOOK
Press ENTER.
The display will show REVIEW>>.
Press ꢂ.
The display will show ADD>>
Press ENTER.
Use the keypad to enter the number. A maximum of 20 digits may be stored. Use
ꢀor DELETE to delete digits.
9.
Press and hold ENTER until the cursor flashes in the name area.
The cursor will begin to blink on the name line.
Use the keypad to enter the name.
Press and hold ENTER until the cursor flashes in the number area. You can now
enter another number into the phone book. Follow steps 7 - 11 to do this. If you do
not wish to enter another number, press MENU.
10.
11.
12.
REVIEWING PHONE BOOK ENTRIES
There are two ways to review entries in the phone book. You may scroll through the
listings one by one or you may go directly to a particular number.
To scroll through the listings follow the steps below.
1.
2.
3.
4.
5.
6.
Press MENU.
The display will show PHONE BOOK
Press ENTER.
The display will show REVIEW>>.
Press ENTER.
Useꢁor ꢂ toscrollthroughtheentries. Youmayalsoenteraletterwiththekeypad
and skip directly to the first entry beginning with that letter.
If you know the sequence number of the entry in the phone book, press the number and
# while on hook. For example, entering “3#” will display the third entry in the phone
book. You can then use ꢁor ꢂ to scroll through the entries. Entries in the phone
book are stored in order of entry. They are NOT stored in alphabetical order.
DIALING FROM THE PHONE BOOK
To dial from the phone book, first display the desired number as described above. Then
come off hook and the number will be dialed.
DELETING A PHONE BOOK ENTRY
With the number displayed, press DELETE. The display will show “DELETE?” Press
DELETE again to delete the entry. Press ENTER to cancel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING A CALLER ID RECORD IN THE PHONE BOOK
1.
2.
3.
Use ꢁor ꢂ to display the number.
Press and hold ENTER until the first character of the name begins to flash.
Make any desired changes to the name using DELETE to delete letters and the
keypad to add letters.
4.
5.
Press and hold ENTER until the cursor flashes in an empty number area.
Press MENU.
CALLER ID
Caller ID service will display the name and number of callers. The 9125 is also
compatible with Caller ID on Call Waiting (CIDCW). Using this service allows you to
know who is calling even during another call. Both Caller ID and CIDCW are services
provided by the local telephone company. You must be subscribed to these services to
see Caller ID information on the 9125.
RECEIVING CALLS
When the telephone is not in use and a new call is received, the display will show the
phone number, the caller’s name, and the call date and time. A “+” symbol will appear in
the upper right corner of the display if a call has come in more than once.
PRIVATE CALLS
The message below will display when a caller has blocked delivery of his name or
number.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID ON CALL WAITING
Call-waiting service alerts you to a new call by playing a tone while you are on a call.
Call Waiting Caller ID not only tells you there is another call waiting, but lets you know
who the caller is before the call is answered. The name and number of the incoming call
will be shown on the display.
Press FLASH to place the first call on hold and answer the new call. Press FLASH
again to return to the first call.
REVIEWING CALLS
1.
2.
While on hook, press ꢁor ꢂ to see the stored calls. The 9125 stores up to 99 calls.
The reviewed number can be stored into any of the auto memory buttons. See the
SPEED DIAL section of this guide for instructions.
3.
When the end of the call records is reached, the display will show [END OF LIST ].
DELETING CALLS
If more than 99 calls have been received by the 9125, the oldest records will be dropped
to make room for the new calls. To prevent this, calls can be manually deleted. Indi-
vidual calls can be deleted or all calls can be deleted. To delete calls, follow the
instructions below.
1.
2.
3.
4.
While on hook, press ꢁor ꢂ to see the stored calls.
With the desired call displayed, press DELETE.
The display shows DELETE ?
Press DELETE or ENTER to delete the number. Press any other key to exit.
To delete all calls follow the instructions below.
1.
2.
3.
4.
While on hook, press ꢁor ꢂ to see the stored calls.
With a call displayed, press and hold DELETE.
The display shows ALL DELETE ?
Press DELETE to delete all the numbers. Press any other key to exit.
CALL BACK
It is possible to dial directly from the display.
1.
2.
While off hook, press ꢁor ꢂ to see the calls.
With the desired call displayed, press ENTER to dial out the number. If an Area
Codewasenteredduringtheunitsetup,the#keycanbeusedtochangethedialformat
between 7, 10 and 11 digits. With the number displayed, press # to add a 1 for long
distance. Press#againtodisplayonly7digitsforlocaldialing. Press#againtoreturn
to 10 digits.
Numbers can also be selected while on hook. They will be dialed when the phone is
taken off hook.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you have any problems with your telephone service, determine if the problem is
with your unit or the telephone company lines BEFORE CALLING THE TELEPHONE
COMPANY. Always disconnect the power adapter, telephone line and batteries and
reinstall them before calling for service. The telephone company may charge you for a
service call if the problem is caused by your telephone.
PHONE DOES NOT RING
1.
2.
Line cord is disconnected at telephone outlet or at telephone.
Phone is off hook. Make certain the hookswitch is depressed when the handset is in
the cradle.
3.
SPEAKERPHONE is on. Turn off speakerphone.
NO DIAL TONE
Wire is disconnected at telephone or at wall jack. Test the telephone in a different wall
jack. If it works, the first jack may be defective.
BLANK SCREEN
1.
2.
Check if the adapter is connected properly and that batteries are installed.
Press the Contrast button to see if contrast level is set correctly.
CALLERS ARE NOT DISPLAYED ON THE SCREEN
1.
Verify that you have subscribed to the appropriate service (Caller ID and Call
Waiting Caller ID) from your telephone company. If you only subscribed to Caller
ID service the unit will not display call waiting caller ID information.
Check if your answering machine is set to answer before 2 rings.
2.
NO CALLER INFORMATION IS DISPLAYED WHEN HEARING THE CALL
WAITING BEEP
1.
2.
Verify that you have subscribed to Call Waiting Caller ID service from your
telephone company.
Verify that Call Waiting is turned on. See Step 2 of the UNIT SETUP section of this
manual.
MESSAGE ERROR HAPPENS FREQUENTLY
Caller information was not transmitted properly. Check with your telephone company to
see if there is a problem with your phone line.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE REPAIR
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Telephones
manufactured by CORTELCO must be returned to us for repair.
You can return your telephone to CORTELCO for repair or replacement in
accordance with our LIMITED WARRANTY.
CORTELCO warrants THIS PRODUCT against defects in material and workmanship in
accordance with our LIMITED WARRANTY. If your telephone is returned for repair,
include a copy of your sales receipt containing the date-of-purchase. DO NOT IN-
CLUDE THE ORIGINAL SALES RECEIPT.
If date-of-purchase is not included, the factory date printed on the label on the bottom
of your telephone will be used as the date-of-purchase. The factory date allows six
months for distribution and sale of this product.
If you return your telephone for repair, the warranty period is not extended. The
original date-of-purchase continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after
the LIMITED WARRANTY has expired if you send it to us in a complete and undam-
aged condition. The repaired unit will be shipped to you C.O.D., freight collect.
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair,
package it carefully, preferably in the original carton. Be sure to include your return
address, a copy of the sales receipt showing date-of-purchase, and a note describing the
problem you have with your Telephone. Shipping must be prepaid. If the telephone is
in warranty, it will be repaired or replaced, at our option, at no cost to you, and it will be
returned shipping prepaid.
Ship your telephone (shipping prepaid) to:
CORTELCO
REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834
22
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION
Part 68 is a Federal regulation which requires equipment to be tested and registered with
the FCC prior to its connection to the network. This equipment complies with Part 68 of
FCC rules. On the bottom of the telephone is a label that contains, among other
information, the FCC Registration Number and the Ringer Equivalence Number (REN)
for this equipment. You must, upon request, provide this information to your telephone
company.
The Ringer Equivalence Number(REN), which is used to determine the number of
devices you may connect to your phone line, indicates the amount of power that your
telephone draws from the telephone company line during ringing. If you have more than
one telephone (or other terminal device) connected to the telephone company line, you
should total the RENs, and be sure that the total is not more than five. Your telephones
may not ring if the total is more than five. Also, in some rural locations, your telephone
may not ring if the REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin-operated lines or party
lines.
INSTALLATION This model telephone must be connected to the telephone company
lines through a modular jack. The required USOC for the modular jack is RJ11C for desk
mounting and RJ11W for wall mounting. The USOC number is printed on the label on
the bottom of your telephone.
HEARING-AID COMPATIBILITY The handset on your telephone will work with
magnetically-coupled hearing aids. You can use a hearing aid equipped with a T
(Telephone) switch.
IN CASE OF TROUBLE If your telephone should cause problems on the telephone
line, the telephone company can temporarily disconnect your service. The telephone
company must then notify and allow you to correct the problem.
The telephone company may from time to time change its lines or equipment. They must
notify you if planned changes will affect your telephone service, to allow you to take
steps to prevent interruptions.
This telephone complies with Part 15 of the FCC Rules. In the unlikely event that
interference occurs, move the telephone and/or radio, television, etc. to increase the
separation distance.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto Rico, CORTELCO
warrants it against defects in material and workmanship for a period of one (1)
year from the date of original purchase. This warranty is in lieu of all other
express warranties. During the warranty period, CORTELCO agrees to repair
or, at its option, replace the defective product, or any part of it without charge for
parts or labor. This is your exclusive remedy. This warranty does not cover
damage resulting from accident, misuse, abuse, improper installation or opera-
tion, lack of reasonable care, the affixing of any attachment not provided by
CORTELCO with the product and loss of parts. The warranty is voided in the
event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various types of
services to customers. CORTELCO does not warrant that this product is
compatible with the type of equipment of any particular phone company or
the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE
WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, AS OF THE DATE ONE YEAR
FROM THE ORIGINAL PURCHASE OF THE PRODUCT. CORTELCO
ASSUMES NO RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITA-
TIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
If failure occurs and your telephone is in warranty, service shall be provided by
returning it to CORTELCO - Repair Center, 1703 Sawyer Road, Corinth,
Mississippi 38834, shipping prepaid. The product will be repaired or replaced
if examination by us determines the product to be defective. Telephones received
damaged as a result of shipping will require you to file a claim with the carrier.
9125 - Manual Rev. 1.2
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|