DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) 12V MR16 lamps in a
2x2 square configuration.
Comments
Prepared by
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
SPECIFICATION FEATURES
A... Housing
branch wiring, 6 #12 90º C supply
lamp adjustment. Beveled-edge lamp ring
is secured with threadless, bayonet action.
Housing, junction box & trimless
meshplate assembly are all steel
conductors or 60º C for end of run. The
COMBOLIGHT®
Next Generation
Recessed
fixture is also UL listed as ‘access above Optional retractable arm is available for
construction. Perforated meshplate allows ceiling not required’.
for trimless installation in drywall/plaster
lamp pulldown and extreme aiming.
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
D... Electrical
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
Electrical accessible through ceiling
opening. J-Box located on the side wall
Multi-Lamp Fixture
of the housing behind removable access hangers. Four tabs on housing for
doors. Integral electronic or magnetic
low voltage transformers on individually
securing to structure. Perforated flaps
along housing sides for securing trimless
Four (4) Light Square
12V MR16
removable “trays” for easy maintenance. insert to fixture and drywall.
May also be configured for remote power.
G... Labels
B... System Protection:
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
E ... Lamps
Four (4) 12V MR16 lamps mounted in
adjustable double gimbals. Lamp holders
New Construction
Housing
holes in housing provide cooler operation. are individually removable and may be re-
gressed 1” for additional cut-off. Lamp can
Ceiling Cut-Out: 8.55” x 8.55”
Trimless
C... Junction Box
Junction Box is UL listed for through
accept up to three optical accessories (i.e.
lens + hex louver + snoot). 45º x 45º locking
18.20”
14.07”
20.24”
5.75”
14.11”
7.75”
3.88”
14.11”
Thermal
Protector
Double
Gimbal
45º x 45º
Adjust
Integral Low Voltage
Transformers
7.75” 3.88”
Perforated
Meshplate
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.
ORDERING INFORMATION
CX
N
N
Configuration
Lamp Type / Wattage Label
Power Supply
Lamp Mechanism
G = Double Gimbal
= Retractable Double Gimbal
Trim Insert Finish
CX = COMBOLIGHT
Recessed Four (4) Light
Square
037M16 = 37 Watt max. MR16 12V
042M16 = 42 Watt max. MR16 12V
050M16 = 50 Watt max. MR16 12V
071M16 = 71 Watt max. MR16 12V
Voltage
N = Trimless
1
2
= 120V
= 277V
R
Housing
Power Supply
Trim Insert
Housing Interior/Electrical Door/Sleeve
N = New Construction
C = Chicago Plenum
E = Electronic Low Voltage
Transformer
N = Trimless
Finish
W = White
M = Magnetic Low Voltage
Transformer
B
S
= Black
= Industrial Silver
rev 121107
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|