INVUETM
DESCRIPTION
DIMENSIONS
ENTRI Series’ family of modular
faceplate designs provide a
7 3/4"
[196 mm]
tasteful architectural statement
equally suitable for indoor and
outdoor environments. Available
luminous faceplate window adds
a signature look, while affording
custom color capability.
15 25/32" [400 mm]
8 1/8" [206 mm]
ENC
ENTRI ROUND
CLEAN
In downlight only configurations with no
faceplate window.
ORDERING INFORMATION
SAMPLE NUMBER: ENC-150-MH-120-EB-3S-BK-LG-L
2 6 - 2 5 0 W
Metal Halide
WhiteSON High Pressure
Sodium
8
Colors (add as
suffix/must specify)
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
Lamp Type
Voltage
Ballast
MB=Magnetic
EB=Electronic
Ballast
X=None
(for Halogen
Lamp)
Optical System
Options &
Accessories
(See Below)
Product Family Lamp
13
MH=Metal Halide 120=120V
WS=White SON 208=208V
Downlight or
Uplight (HID or
Halogen)
3S=Type III
FT=Forward
Throw
FX=Wall Grazing
Optic
TS=Tight Spot
ENC=ENTRI
Round
Wattage
1
Compact Fluorescent
Quartz Halogen
HID
12
High
Pressure
Sodium
CF=Compact
Fluorescent
HL=Quartz
Halogen
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
Wired 277V
MT=Multi-Tap
Wired 277V
TT=Triple-Tap
Wired 347V
UNV=120-277V
Universal
Clean
39=39W
70=70W
6
100=100W
150=150W
Compact
Fluorescent
26=26W
32=32W
42=42W
52=52W
57=57W
64=64W
84=84W
7
9
2
ARCHITECTURAL WALL
LUMINAIRE
10
Downlight and Uplight (HID and Halogen)
3SG=Type III, 90% Main/10% Secondary
Glow
3SP=Type III with Pencil Secondary
FTG=Forward Throw, 90% Main/
10% Secondary Glow
FTP=Forward Throw with Pencil Secondary
FXF=Wall Grazing Optic, 50% up/50% Down
TSF=Tight Spot, 50% up/50% Down
Compact Fluorescent
CFG=90% Main + 10% Secondary Glow
CFM=100% Main, Up or Downlighting
11
3
4
• One piece die-cast
aluminum construction.
Accommodates either
up or down mounting
configurations with no
modifications
3
3
Electronic
Ballast
5
Halogen
100=100W
150=150W
250=250W
• One piece die-cast
aluminum faceplate
utilizes a continuous
silicone gasket to seal
securely to housing
14
14
19
Optional Luminous Faceplate Insert
LG=Luminous Glass Insert
LGO=Luminous Glass Insert
with Warm Orange Gel
LGR=Luminous Glass Insert
with Red Gel
LGB=Luminous Glass Insert
with Bright Blue Gel
LGG=Luminous Glass Insert
with Deep Green Gel
Options
Accessories
F=Single Fuse (120, 277 or 347V)
Specify Voltage
FF=Double Fuse (208, 240 or 480V)
Specify Voltage
DSAB=Dual Fluorescent Switching
Control Adapter Box
QAB=Quartz Restrike Adapter Box
EMAB=Quartz Restrike with Delay Adapter Box
(Also Strikes at Cold Start)
EM/SCAB=Quartz Emergency Separate Circuit
Adapter Box
VA2001-XX=Thru-way Box
VA2002-XX=Wire Guard Kit
• Side hinged faceplate
swings open via release
of one (1) flush mount
die-cast aluminum latch
on housing side panel
15
• Choice of ten (10) high
efficiency optical systems
CF/EMAB=Emergency Battery Backup Adapter Box
16
(Specify 120 or 277V)
PC=Button Type Photocontrol
(specify voltage)
WG=Wire Guard
FRM=Frosted Main Flat Glass
FRS=Frosted Secondary Flat Glass
L=Lamp Included
• Ballast and related
electrical componentry
are heat sunk to the
housing
17
18
ENC
WATTAGE TABLE
Metal Halide
39, 70, 100, 150W
100W
(Standard for all Halogen lamps)
• Optional die-cast
White Son HPS
Certifications
aluminum adapter box to
allow for surface conduit
wiring, quartz lamp
Compact Fluorescent
Dual Compact Fluorescent
Quartz Halogen
26, 32, 42, 57W
(2) 26, (2) 32, (2) 42W
100, 150, 250W
IP66 Rated
CSA Listed
U.L. 1598
FCO
Full Cutoff
40°C Ambient
ISO 9001
options, and emergency
battery pack capability
NOTE: 250W Quartz requires thru-way mounting box. 150W requires
magnetic ballast.
• Approximate net weight:
13 lbs. (6 kgs.)
NOTES: 1 All MH lamps are T6 envelope with G12 lamp base. All HPS lamps are T6 envelope with GX12 lamp base. 2 All 26/32/42/57W CF lamps feature a 4-pin lamp
base. Available in CFM and CFG distributions only. 3 Dual compact fluorescent lamps. 4 Nominal M.O.L lamp length of 57W CFL not to exceed 7". 5 All Halogen
lamps are T4 envelope with mini-can base, 120V lamp. 6 WhiteSON HPS lamp available in 100W only. Requires electronic ballast. 120/277V only. Includes use of
VA2001 accessory Thru-way Box. 7 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V.
Specify with UNV voltage designation. 8 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and
ordering information. 9 Dual-tap is 120/277V wired 277V. 10 Multi-tap is 120/208/240/277V wired 277V. 11 Triple-tap is 120/277/347V wired 347V. 12 120 through
277V only. Electronic ballasts contain internal fusing, no supplemental fusing is necessary. Electronic ballast available with all CF lamps, and 39/70/100W MH
lamps. Available with 150W MH lamp. Includes VA2001 accessory Thru-way Box. Not available with QAB or EMAB options. 13 Custom and RAL color matching
available upon request. Consult your INVUE Lighting Systems Representative for further information. 14 Add as suffix in the order shown. 15 Dual switching
requires dual 26, 32 or 42W Compact Fluorescent lamps. Allows independent switching control of each lamp through use of two (2) electronic ballasts. Allows
50% power reduction when dual ballasts are independently wired and controlled. 16 CF lamps only. Battery backup operates 90 minutes at minimum 32°F (0°C),
42W maximum. 17 For use in down lighting applications only. 18 Frosted secondary lens provided standard on 3SG, FTG, and CFG distributions. 19 Order
1120
COOPER LIGHTING
separately, replace XX with color suffix. 20 Specifications and dimensions subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|