Contec Universal Remote RT U49C User Manual

2
3
4
5
6
To program your TV / VCR combination unit...  
1. First, program your remote as a TV  
Reset  
Pace  
510 digital  
Philips  
digital  
Pioneer  
Voyager  
1. Introduction  
GE  
005 019 027 031 037 041 046 051  
004  
017  
Lets you reset your remote to its original default  
settings. For more information, see section 17.  
Your CheckMate™ IV (Model RT-U49C) universal  
remote control is simple to program, easy to use, and  
can operate up to four (4) devices, which include:  
053 055 061 070 131  
Gibralta  
Goldstar(LG)  
007 025 027 031 041 044 051 059  
Following the steps in this section, find a TV Setup  
Code that operates the TV functions of your TV /  
060 065  
3. Installing / Replacing Batteries  
+
+
VCR (power, vol / – , mute, ch / – 0 – 9).  
2. Then, program your remote as a VCR  
007 027 031 041 044 059 060 065  
Cable set-top terminals  
Televisions  
CABLE  
TV  
VIDEO  
AUDIO  
004  
008  
009  
010  
124  
Install two (2) new “AA” batteries as indicated by the  
diagram in the battery compartment.  
BC-4600, BA-6000  
BA-9000  
Grundig  
Hall Mark  
Hitachi  
Inkel  
JC Penney  
059  
VCR, DVD  
Following the steps in Section 6 for code number  
programming, enter, lock and test each 3-digit  
VCR Setup Code until a code is found that  
operates the VCR functions of your TV / VCR  
(play, stop, fast-forward, rewind, pause, record).  
Note: You can not use the Point and PressTM  
Programming method to program the VCR  
functions of the TV / VCR.  
041 051  
Cassette deck, CD, receivers,  
amplifiers, 2nd TV, 2nd VCR.  
When the illuminated buttons become dim or do not  
illuminate during use, install two (2) new “AA” size  
batteries.  
Your remote control has Memory GuardTM, which  
eliminates reprogramming after battery changes.  
BA-V1000, BA-V2000  
007 027 049 051 083 085 098 100  
075  
Tocom  
Before you can use your remote control, it must be  
programmed (set-up) to operate the above devices.  
005 010 027 037 041 051 065 069  
5503VIP, 5507, 5508  
011  
070  
Zenith  
JVC  
048 077 080 132  
041 051  
007  
2. Before Getting Started  
Z-Tac  
012  
013  
Kawasho  
KMC  
Some of the special features and buttons on your  
remote control are as follows:  
MM2500  
4. Programming Your Cable Set-Top Terminal  
Oak  
KTV  
007 030 059 065  
062  
062  
062  
027 041 051  
006 035 067  
TM  
TV Setup Codes  
Point and Press Programming  
Model RT-U49C is pre-programmed to operate  
the Scientific-Atlanta Explorer , Pioneer Voyager  
and Pace 510 digital set-top terminals.  
Sigma One, P1, P2, P3  
Sigma 2000  
014  
Kurazai  
Lodgenet  
Logik  
Admiral  
Adventura  
Akai  
058 061 062 067  
Let’s you program your TV, VCR Audio devices  
without codes. For more information, see sections  
5, 6 and 7.  
004  
065  
135  
To operate a different cable set-top terminal, look up  
the brand and model in the Cable Setup Code list. If  
you are not sure of your brand and model, contact  
your cable company.  
Luxman  
LXI  
5. Programming Your TV  
Aiwa  
[
]
ALL  
Amark  
Ampro  
007 086  
If you have a TV that’s operated by remote control, it  
is recommended that you plug it directly into a wall  
outlet instead of the cable set-top terminal.  
Magnavox(Philips) 001 005 007 014 026 027 041 052  
068 081  
Turns all of your devices on / off with one button  
112  
006  
[
]
press. ALL can even be programmed to  
automatically tune your TV to its correct output  
channel. For more information, see section 8.  
Amstrad  
Anam  
Majestic  
Marantz  
Megatron  
Memorex  
062  
To program your cable set-top terminal...  
088 089 093 111 120 125 134  
003 065 076  
086  
To program your TV...  
1. Turn on your cable set-top terminal.  
AOC  
065  
[
] [  
] [  
]
Movies , Sports , News  
1. Turn on your TV.  
[
]
[
]
Audio Vox  
Belcor  
111  
2. Press CBL , then SELECT together - hold both  
010 031 062  
[
]
Program your favorite channels on the “Movies”,  
“Sports” and “News” buttons. For more information  
see section 9.  
buttons down until CBL illuminates.  
041  
MGA/Mitsubishi 003 027 031 041 044 051 065 076  
[
]
[
]
2. Press TV , then SELECT together - hold both  
Bell & Howell  
Broksonic  
Brokwood  
Candle  
062  
084  
3. From the Cable Setup Code list, locate and enter  
the 3-digit code for your brand and model.  
[
]
buttons down until TV illuminates.  
011 054  
Montgomery Ward 007 037 044 057 058 062 065 067  
081  
NEC  
Orion  
Panasonic  
Philco  
Philips(Magnavox) 001 005 007 014 026 027 041 052  
068 081  
Pilot  
[
+]  
[
]
041  
3. a. Press and hold CH until your TV turns off.  
VCR / VOD Toggle  
[
]
[
]
4. Press CBL to lock in the code. The CBL  
button will blink and go out.  
[
+]  
.
As soon as your TV turns off, release CH  
027 052  
023 027 031 044 101  
“Toggles” the VCR buttons between cable Video-  
On-Demand (VOD) and VCR / DVD functions. For  
more information, see section 10.  
Centurion  
Citizen  
044 051  
013 017 033 045 047 078  
018 019 021 024 053 063  
001 007 027 052 065 081  
OR  
Write your cable set-top terminal brand & setup  
code__________  
027 052 059 062  
b. From the TV Setup Code list, locate and enter  
a 3-digit code for your brand. If multiple codes  
are listed, you may have to enter several codes  
until your TV turns off.  
Concerto  
Contec  
041 051  
TM  
SmartKeys  
020  
Refer to section 16 for code number readback.  
[
] [  
]
Program multiple button presses on the CBL , TV  
Coronado  
Craig  
007  
[
]
Cable Setup Codes  
and BYPASS buttons. For more information, see  
134  
041 059 097  
section 15.  
Motorola (General Instrument)  
[
]
4. Press MUTE . If your TV turns back on, press  
Crown  
007  
Pioneer  
Portland  
ProScan  
Proton  
056 103  
[
]
[
]
[
]
DCT, CFT 2200  
001  
TV to lock in the code. The TV button will blink  
and go out.  
DEVICE  
Curtis Mathes  
Daewoo  
044 061 062  
007 027  
CFT2100, CFT2000  
002  
027 039 040 041 042 051 090 091  
055 061 073 082 112  
Tells which device you are currently operating by  
illuminating the device’s power button. While the  
current device is illuminated, press a nonilluminated  
power button to operate a different device.  
092 094 101 102 108 114 118 121  
031 126 128  
If your TV does not turn back on, repeat steps 3  
and 4 until you can turn your TV off and on .  
Jerrold  
003  
123 130  
Pulsar  
041  
DL4, DP(V), DQN(V), DPBB  
Daytron  
Dumont  
041 044 051  
Quasar  
Radio Shack  
Realistic  
RCA  
019  
Write your TV brand & setup code  
.
Scientific Atlanta  
Explorer  
TM  
041  
041  
Memory Guard  
004  
015  
016  
018  
005  
006  
007  
Refer to section 16 for code number readback.  
Electro Home  
Elektra  
041 051  
012 057 079  
Eliminates reprogramming after battery changes.  
Time Out  
Shuts remote off if any button is pressed and held  
for 45 seconds. This extends battery life in the  
event the remote becomes lodges under or  
between heavy objects.  
Explorer(#, *)  
Explorer(Blue Ridge)  
Explorer(WorldGate™)  
8600X  
8600  
8540, 70, 90  
002  
022 027 046 053 055 061 065 072  
073 082  
TM  
Note When using the Point and Press  
Emerson  
007 008 011 012 017 054 065 079  
Programming method (step 3a). If you find a code  
that turns your TV off but not back on (step 4),you  
may have gone past the correct matching code. Try  
108 110 131  
041 051  
010 028  
004  
Sampo  
Samsung  
Sanyo  
031 044  
Envision  
Fisher  
Funai  
007 016 020 031 044 119 129  
002 010 028 104 133  
031 044 079  
[
–]  
pressing CH one press at a time until you find a  
code that turns your TV back on.  
Scott  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
14  
15  
16  
17  
18  
TM  
[
]
[
]
[
]
[
]
[
]
ALL  
ALL devices on / off.  
Cable set-top terminal on / off.  
TV on /off.  
The BYPASS button (cable mode) normally places  
your Cable set-top terminal in a BYPASS mode.  
While the cable set-top terminal is in its BYPASS  
mode, you can record one program on your VCR  
and watch a different program through your TV.  
When exiting the cable set-top terminal’s BYPASS  
mode, your TV must be re-tuned to its correct  
output channel (typically 3) for proper cable  
reception.  
To operate your TV, press DEVICE , then TV . In  
ALL  
ALL devices on / off.  
8. Programming the [  
] Button  
15. Your Remote’s SmartKeys  
ALL  
[
]
CBL  
[
]
your remote’s TV mode, you can then press...  
CBL  
Cable set-top terminal on / off.  
TV on /off.  
Once you have programmed each of your devices,  
[
]
TV  
[
]
TV  
Your remote has three SmartKeysTM CBL , TV ,  
BYPASS that operate in its cable mode.  
Each SmartkeyTM can be programmed so whenever  
it’s pressed, it can transmit up to 12 individual button  
presses in sequence.  
[
]
([  
] [  
]
[
]
ALL  
ALL devices on / off.  
Cable set-top terminal on / off.  
TV on /off.  
VCR / DVD on / off.  
Audio on / off.  
Increases / decreases TV channel.  
Numeric entry buttons.  
Increases / decreases TV volume.  
Mute TV volume.  
press ALL to turn all of them on / off with a single  
button press.  
[
]
VIDEO  
VCR / DVD on / off.  
Audio on / off.  
[
]
VIDEO  
VCR / DVD on / off.  
Audio on / off.  
[
]
[
])  
CBL  
[
]
AUDIO  
[
]
AUDIO  
[ ]  
TV  
[
] [  
]
+
CH / CH  
Increases / decreases cable channel.  
Increases / decreases cable volume.  
Mute cable volume.  
Exits on-screen menus, view guide,  
interactive screens.  
[
]
If you would like the ALL button to also tune  
your TV to its correct output channel (typically 3)  
follow these steps:  
[
+] [ ]  
CH / CH  
Increases / decreases channel.  
Enter channels.  
Increases / decreases volume.  
Mute volume.  
[
]
[
] [  
]
]
+
VIDEO  
VOL / VOL  
[ ] [ ]  
0
9
[
[
]
MUTE  
AUDIO  
[
+] [ ]  
VOL / VOL  
[
]
EXIT  
[
0
] [  
9
]
+
CH / CH  
[
]
[
]
[
]
1. Press DEVICE , then CBL to select the remote’s  
cable mode.  
MUTE  
TM  
[ ] [ ]  
[
]
You can program the BYPASS SmartKeyTM so  
automatically tune your TV to its correct output  
channel.  
Programming and using the CBL SmartKey  
[
]
[
]
TV / VCR  
Change VCR / DVD video inputs.  
Rewind.  
[
]
SETTINGS  
Displays program settings.  
Displays interactive program guide.  
Displays channel, time information.  
View favorite channels.  
[
] [  
]
]
+
VOL / VOL  
[
]
]
]
]
]
]
[
]
[
]
The CBL button normally turns on / off your cable  
set-top terminal.  
You can program the CBL SmartkeyTM to turn on  
your cable set-top terminal and TV, and tune your TV  
to its correct output channel (typically 3) with one  
button press.  
GUIDE  
[
]
[
]
2. Press SETTINGS , then ALL together - hold  
[
MUTE  
[
[
[
[
[
[
]
Play.  
INFO  
[
]
both buttons down until the TV illuminates.  
[
]
TV / VCR  
Change TV’s video inputs.  
VCR / DVD rewind.  
VCR / DVD play.  
[
]
FAV  
[
]
[
]
Fast-forward.  
1. Press DEVICE , then CBL to select the remote’s  
cable mode.  
[
]
]
]
]
]
]
[
]
[ ]  
[ ] ,  
.
3. Press 0 , then 3  
[
]
LAST  
Last channel viewed.  
Pause.  
[
[
[
[
[
[
] [ ] [ ]  
[
+]  
[
]
A , B , C  
On-screen decision buttons.  
Numeric entry buttons.  
4. Press CH to store the TV channel. The TV  
Stop.  
[
]
[
]
2.Press BYPASS , then SETTINGS together -  
VCR / DVD fast-forward.  
VCR / DVD pause.  
[ ] [ ]  
0
9
button will blink and go out.  
Record.  
[
]
hold both buttons down until CBL illuminates.  
] [ ] [ ] [ ]  
3. In this order, press BYPASS , DEVICE , TV , 0 ,  
[
]
+ –  
PAGE  
Page up / down through menus,  
program guide.  
Your TV output channel may also be 2 or 4.  
If you are not sure, contact your cable operator.  
VCR / DVD stop.  
[
[
]
[
]
1. Press DEVICE , then CBL to select the remote’s  
cable mode.  
14. Programming Volume Control  
[
] [ ] [ ] [  
]
,
,
,
Navigate on-screen menus, program  
guide, PPV events and interactive  
services.  
VCR / DVD record.  
[ ]  
[
]
3
,
. The CBL button will blink and remain  
Depending on your TV brand, the channel may  
have to be entered as “3”, “03” or “003”.  
When you first program your remote, volume /  
mute are controlled through your TV(except  
AUDIO which defaults to the AUDIO device).  
illuminated.  
[
]
[
]
2. Press CBL , then SETTINGS together - hold  
both button down until CBL illuminates.  
12. Operating Your Video(VCR or DVD) Device  
[
]
SELECT  
Select menu, interactive screen item.  
Switch between cable set-top terminal  
and TV.  
[
]
[
+
]
[
]
4. Press CH to store the setting. The CBL  
button will blink and go out.  
[
]
Note : When pressing the ALL button, be sure to  
keep the remote control aimed at the devices to  
ensure all functions are received in their entirety.  
[
]
BYPASS  
Your remote control can operate many functions of  
your VCR or DVD.  
[
] [ ] [ ] [ ]  
3.In this order, press CBL , TV , 0 , 3  
,
.
The volume control options in each mode of the  
remote are:  
[
]
[
]
To return the BYPASS button to its normal function,  
repeat steps 1 and 2 above, then press CH .  
[
]
TV / VCR  
Changes VCR video inputs.  
The CBL button will blink and remain illuminated.  
[
]  
[
]
To operate your VCR or DVD, press DEVICE  
then VIDEO . In your remote’s Video, you can  
[
]
9. Programming [ ]  
], [  
] [  
MOVIES SPORTS NEWS  
VCR / VOD  
“Toggles” the VCR buttons between  
cable Video-On-Demand (VOD) and  
VCR / DVD functions.  
[
+]  
[
]
4.Press CH to lock in this setting. The CBL  
button will blink and go out.  
[
]
CBL  
TV (default), Cable or Audio.  
TV (default), Cable or Audio.  
TV (default), Cable or Audio.  
Audio device (default), Cable or TV.  
Your TV output channel may also be 2 or 4. If you  
are not sure, contact your cable operator.  
Each of these buttons can be programmed to store a  
favorite cable channel.  
then press...  
TV  
[
]
To return the CBL button to its normal function,  
VIDEO  
AUDIO  
[
]
[
]
ALL  
ALL devices on / off.  
Cable set-top terminal on / off.  
TV on /off.  
VCR / DVD on / off.  
Audio on / off.  
Press VCR / VOD . If...  
Depending on your TV brand, the channel may  
have to be entered as “3”, “03” or “003”  
Note : When using any SmartKeyTM to transmit a  
series of functions, be sure to keep your remote  
aimed at the devices to ensure all functions are  
received in their entirety.  
[
]
[
]  
.
For example, to program the MOVIES button to  
cable channel 53, follow these steps:  
repeat steps 1 & 2, then press CH  
[
]
CBL  
[
]
a. CBL illuminates, the VCR buttons  
are operating your cable Video-On  
-Demond(VOD) functions.  
TM  
[
]
TV  
[
]
Programming and using the TV SmartKey  
To control volume / mute through your cable  
set-top terminal in the remote’s cable mode...  
[
]
[
]
[
]
1. Press DEVICE , then CBL to select the remote’s  
VIDEO  
[
]
The TV button normally turns on / off your TV.  
cable mode.  
[
]
AUDIO  
OR  
[
]
[
[
]
1. Press CBL , then SELECT together - hold both  
You can program the TV SmartKeyTM to turn on your  
TV and tune your TV to its correct output channel  
(typically 3) with one button press.  
[
]
+
[
]
CH / CH  
Increases / decreases VCR channel.  
Enter VCR channels.  
Increases / decreases TV volume.  
Mute TV volume.  
[
]
[
]
[
]
2. Press CBL , then MOVIES together - hold both  
[
]
b. VIDEO illuminates, the VCR  
buttons are operating your VCR or  
DVD functions.  
]
buttons down until CBL illuminates.  
[ ] [ ]  
[
]
0 - 9  
down until CBL illuminates.  
[ ] [ ] [ ]  
[
]
[
]
+
VOL / VOL  
[
+
]
[
]
2.Press VOL , then CBL for cable volume. The  
3. Press 0 , 5 , 3 . (enter ch. # in 3-digit format) .  
16. Code Number Readback  
[
]
MUTE  
[
]
CBL button will blink and go out.  
[
]
[
]
[
]
[
]
[
]
[
]
4. Press MOVIES to store this channel. The CBL  
1. Press DEVICE , then CBL to select the remote’s  
cable mode.  
While CBL or VIDEO is illuminated,  
[
]
TV / VCR  
Change VCR video inputs.  
VCR / DVD rewind.  
button will blink and go out.  
[
]
To identify a 3-digit setup code stored under the  
Point and PressTM method, follow these steps:  
press VCR / VOD to switch from  
Video-On-Demond to VCR or VCR to  
Video-On-Demand.  
To return volume control to your TV, repeat step 1,  
then press VOL , then TV in step 2.  
[
]
]
]
]
]
]
[
+
]
[
]
[
]
[
]
[
[
[
[
[
Programming the SPORTS or NEWS buttons is  
VCR / DVD play.  
[
]
[
]
2.Press TV , then SETTINGS together - hold both  
the same general procedure as above.  
VCR / DVD fast-forward.  
VCR / DVD pause.  
[
]
To identify the TV setup code...  
buttons down until TV illuminates.  
To control volume / mute through your cable  
set-top terminal in the remote’s Video mode...  
[
]
]
]
]
]
]
VCR / DVD or VOD rewind.  
VCR / DVD or VOD play.  
May also be 4-digit (or 5-digit) format.  
[
[
[
[
[
[
]
[
]
[
] [ ] [ ]  
1.Press TV , then SELECT together - hold both  
buttons down until TV illuminates.  
3.In this order, press TV , 0 , 3  
,
.
VCR / DVD stop.  
The exact # of digits you need to enter depends  
on how your cable operator has setup your  
cable set-top terminal.  
VCR / DVD or VOD fast-forward.  
VCR / DVD or VOD pause.  
VCR / DVD or VOD stop.  
[
]
[
]
[
]
[
]
1. Press VIDEO , then SELECT together - hold  
The TV button will blink and remain illuminated.  
VCR / DVD record.  
[
]
both bottons down until VIDEO illuminates.  
[
]
[
]
[
+]  
[
]
2. Press INFO The TV button wilblink back the  
code numbers, with a 1-second interval between  
each digit of the code.  
4. Press CH to lock in this setting. The TV button  
will blink and go out.  
VCR / DVD or VOD record.  
Programmable favorite channel.  
Programmable favorite channel.  
Programmable favorite channel.  
[
+
]
[
]
13. Operating Your Audio Device  
2. Press VOL , then CBL for Cable volume. The  
10. Operating Your Cable Set-Top Terminal  
[
]
]
MOVIES  
[
]
VIDEO button will blink and go out.  
[
]
To return the TV button to its normal function,  
[
SPORTS  
Your remote control can be setup to operate a tape  
deck, CD, receiver, amplifier, 2nd TV, 2nd VCR as an  
Audio device.  
Your remote control is designed to operate all the  
features and functions of your digital cable set-top  
terminal.  
[
]
Example : For code “035”, the remote will blink 10  
times, then 3 times, then 5 times.  
To return volume control to your TV, repeat step 1,  
then press VOL , then TV in step 2.  
[
]
repeat setps 1 and 2 above, then press CH  
NEWS  
[
+]  
[
]
[
]
11. Operating Your TV  
Programming and using the BYPASS  
[
]
[
]
To operate your Audio device, press DEVICE ,  
To identify the 3-digit Video code, press VIDEO ,  
To operate your cable set-top terminal, press  
TM  
SmartKey  
[
]
then AUDIO . In your remote’s Audio mode, you  
can press...  
[
]
[
]
then SELECT in step 1, then press INFO .  
[
]
[
]
Your remote control can operate many functions of  
your TV.  
DEVICE , then CBL . In your remote’s cable  
mode, you can then press...  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
[
]
To identify the 3-digit Audio code, press AUDIO ,  
[
]
[
]
then SELECT in step 1, then press INFO .  
Mfg  
Model  
Scientific Atlanta  
8540,70,90  
007  
Mfg  
Motorola (General Instrument)  
Pioneer  
Philips  
Digital  
017  
17. Resetting Your Remote control  
Explorer  
(#, *)  
015  
DL4, DP(V),  
M
Explorer  
Explorer  
BC-4600,  
BA-V1000  
BA-V2000  
010  
Explorer  
004  
Voyager  
004  
8600x  
005  
8600  
006  
Model  
CFT2200,2100  
002  
DCT, CFT2200  
001  
BA-9000  
009  
(Blue Ridge)  
(WorldGate™)  
DQN(V), DPBB  
003  
BA-5000, BA-6000  
To reset your remote control to its factory default  
settings...  
Setup Code  
016  
CBL  
018  
CBL  
Setup Code  
008  
CBL  
CBL  
CBL  
CBL  
CBL  
CBL  
CBL  
CBL  
Device  
CBL  
CBL  
CBL  
CBL  
Device  
CBL  
[
]
[
]
1. Press CBL , then SELECT together-hold both  
[
]
down until the CBL illuminates.  
All on  
All on  
All on  
All on  
All on  
All on  
All on  
All on  
All on  
All on  
ALL  
All on  
All on  
All on  
All on  
ALL  
All on  
[
]
[
]
2. Press SETTINGS , then SETTINGS again. The  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CABLE  
TV  
VIDEO  
AUDIO  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
CABLE  
TV  
VIDEO  
AUDIO  
CBL on / off  
TV on / off  
Video on / off  
Audio on / off  
[
]
CBL button will blink and go out.  
18. Helpful Tips and Troubleshooting  
View Guide  
Info  
Guide  
Info  
Guide  
Info  
Guide  
Info  
Guide  
Info  
Guide  
info  
GUIDE  
INFO  
Guide  
Info  
Guide  
Info  
Guide  
Info  
GUIDE  
INFO  
1. Your remote is equipped with a Point and PressTM  
Programming label on the back of its case. This  
will help you quickly program the remote without  
using codes.  
Display  
Menu  
Display  
Menu  
Clock  
Menu  
Settings  
Settings  
Settings  
Menu  
Learn  
Menu  
Menu  
SETTINGS  
Settings  
Settings  
Menu  
SETTINGS  
2. An illuminated mode (power) button will remain  
on whilethe remote is in a programming mode. In  
the absence of an entry, the illuminated button will  
go out after 45 seconds.  
Sel  
<
>
Sel  
Select  
<
>
Sel  
<
>
Sel  
<
>
Select/OK  
<
>
Sel  
Sel (Event)  
OK  
<
>
SELECT  
<
>
Select  
<
>
Sel  
Select  
<
>
Sel  
<
>
SELECT  
<
>
Cursor  
Mute  
Day >  
< Day  
AU  
Prg  
Page +  
Page -  
Day >  
< Day  
Day >  
< Day  
Page +  
Page -  
PC / PM  
TCP  
Page +  
Page -  
PAGE  
PAGE  
Page +  
Page -  
Page +  
Page -  
Page  
Page  
PAGE  
PAGE  
When locking in your devices, the illuminated  
button will blink and go out,  
3. When using the Point and PressTM programming  
method, you may find a code that turns your  
device off but not back on. If this happens...  
Sleep  
Mute  
Timer  
Mute  
Mute  
Mute  
Exit  
Mute  
Exit  
Mute  
Exit  
Mute  
Exit  
Mute  
Del  
Mute  
Del  
Mute  
Exit  
MUTE  
EXIT  
Mute  
Exit  
Mute  
Exit  
Mute  
Exit  
MUTE  
EXIT  
Mute  
Clr  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +, Power on  
Ch -, Power on  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
VOL +  
VOL -  
CH +  
CH -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
Vol +  
Vol -  
Ch +  
Ch -  
VOL +  
VOL -  
CH +  
CH -  
Vol +  
Vol -  
Ch +  
Ch -  
a.the correct code has not been found. Continue  
[
+]  
pressing CH until your devices turn on and  
off.  
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
Enter  
F
Prog  
Enter  
F
Prog  
A
B
C
Enter  
Order  
Clear  
Order  
Help  
A
B
C
A
B
C
Str  
Auth  
#
OR  
PPV  
Buy  
Buy  
b.you may have gone past the correct matching  
[
]  
code. Try pressing CH one press at a time  
until you find a code that turns your devices turn  
back on.  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Lch  
Rcl  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
0, 1 - 9  
0, 1 - 9  
Last Ch  
Fav Ch  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
LAST  
FAV  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
Last  
Fav  
0, 1 - 9  
LAST  
FAV  
0, 1 - 9  
Rcl  
<
Ch  
<
Ch  
Fav  
Fav  
4.If the same button is pressed and held for 45  
seconds, your remote control will turn itself off.  
This extends the battery life by should the remote  
become lodged under or between heavy objects.  
Back  
REW - Cable or Video  
PLAY - Cable or Video PLAY - Cable or Video PLAY - Cable or Video  
FF - Cable or Video FF - Cable or Video FF - Cable or Video  
PAUSE - Cable or Video PAUSE - Cable or Video PAUSE - Cable or Video  
STOP - Cable or Video STOP - Cable or Video STOP - Cable or Video  
REC - Cable or Video  
REW - Cable or Video  
REW - Cable or Video  
REW - Cable or Video  
PLAY - Cable or Video  
FF - Cable or Video  
PAUSE - Cable or Video  
STOP - Cable or Video  
REC - Cable or Video  
REW  
PLAY  
FF  
PAUSE  
STOP  
REC  
REW - Cable or Video  
PLAY - Cable or Video  
FF - Cable or Video  
PAUSE - Cable or Video  
STOP - Cable or Video  
REC - Cable or Video  
REW - Cable or Video  
PLAY - Cable or Video  
FF - Cable or Video  
PAUSE - Cable or Video  
STOP - Cable or Video  
REC - Cable or Video  
Prev  
PC  
Next  
REW  
PLAY  
FF  
PAUSE  
STOP  
REC  
Fwd  
Pause  
REC - Cable or Video  
REC - Cable or Video  
5. For diagnostic functions on Motorola (GI) DCT  
and CFT2200 cable set-top terminal, press  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
A / B  
TV / VCR (VCR)  
VCR / VOD  
A / B  
TV / VCR (VCR)  
VCR / VOD  
A / B  
TV / VCR (VCR)  
VCR / VOD  
P
BYPASS  
TV / VCR  
VCR / VOD  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
Bypass  
TV / VCR (VCR)  
VCR / VOD  
A / B  
TV / VCR (VCR)  
VCR / VOD  
BYPASS  
TV / VCR  
VCR / VOD  
C / R  
TV / VCR (VCR)  
VCR / VOD  
[
]
+
[
]
SELECT INFO together.  
TV / VCR (VCR)  
VCR / VOD  
TV / VCR (VCR)  
VCR / VOD  
TV / VCR (VCR)  
VCR / VOD  
6. If you have any questions concerning the operation  
of your cable set-top terminal, contact your cable  
operator.  
Movies  
Sports  
News  
Movies  
Sports  
News  
#
CH Link  
WEB  
MALL  
CH Link  
WorldGate  
Channel Memory  
PPV/Lock  
Help  
Music/Enter  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Movies  
Sports  
News  
Channel Memory  
PPV  
*
Rev. 7/2001  
© 2001, CONTEC CORPORATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 917385120 User Manual
Cres Cor Microwave Oven FL 2291 User Manual
Dell Server C1100 User Manual
Dymo Postal Equipment PS2R1 1P User Manual
Dynaudio Car Speaker BM9S User Manual
Dynex Flat Panel Television DX LCD32 User Manual
Dynex Network Card DX ECFW User Manual
Fisher Paykel Oven OB60 User Manual
Fisher Paykel Ventilation Hood 88833 EC120DXV2 User Manual
Garland Range G36 2G24R User Manual