Connect Tech Network Card CTIM 00054 User Manual

USER MANUAL  
PCIe/104 (PCI/104-Express)  
to PCI Express Adapter  
Top Stacking Model  
CTIM-00054 (0.01) - March 26, 2010  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCI/104-Express to PCI Express Adapter  
Copyright Notice  
The information contained in this document is subject to change without notice. Connect Tech Inc. shall not  
be liable for errors contained herein or for incidental consequential damages in connection with the furnishing,  
performance, or use of this material. This document contains proprietary information that is protected by  
copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to  
another language without the prior written consent of Connect Tech, Inc.  
Copyright © 2010 by Connect Tech Inc.  
Trademark Acknowledgement  
Connect Tech Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this  
document as the property of their respective owners.  
Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of  
acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this document.  
Revision History  
Revision 0.00  
Revision 0.01  
Original document  
Updated images and compatibility content  
3
CTIM-00054 (0.01) 3/26/2010  
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PCI/104-Express to PCI Express Adapter  
Introduction  
Connect Tech's PCI/104-Express to PCI Express Adapter enables users to install any x1, x4, x8 or x16 lane  
PCI Express card in a PCI/104-Express stack.  
This convenient adapter board enables the testing and development for standard PCI Express cards in the  
PCI/104-Express environment.  
Features  
PCI/Express x1, x4, x8, x16 Lane Card Compatible  
PCI/104-Express & PCIe/104 Compatible  
SBC Top Stacking Compatible  
1. Block Diagram  
Below is a high level view of the PCI/104-Express to PCI Express Adapter. Aside from the x1 and x16 lane  
switch the rest of the PCI express signals are direct connections to those of the PCI/104-Express signals. See  
Table 1 in this manual for a full listing of pinouts and interconnections.  
CTIM-00054 (0.01) 3/26/2010  
4
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PCI/104-Express to PCI Express Adapter  
2. Hardware Installation  
PC104 Stand-Offs  
When installing the ADG017 or ADG20 device into your PCI/104-Express SBC system, four proper stack  
heights (0.6”) PC/104 standoffs must be used. If standoffs are not used, there is high likelihood that the  
PCI/104-Express connector can be damaged.  
Support Bracket Installation  
All of the ADG017 and ADG020 products ship with a Standard Height PCI Express Custom Support Bracket  
that can be optionally installed to provide greater stability to the PCI Express device installed into your  
PCI/104-Express stack. Below are some instructions on how to properly install the bracket.  
STEP #1  
Insert bracket into alignment holes  
STEP #2  
Install and tighten each of the 4 supplied nuts.  
5
CTIM-00054 (0.01) 3/26/2010  
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PCI/104-Express to PCI Express Adapter  
3. Pinouts and Signal Interconnect  
Below is a listing of all signal interconnect between the PCI Express connector and the PCI/104-Express  
connector. Power, ground and presence detection signals have been removed from this list. Any other  
PCI/104-Express signals not listed, are no connects.  
PCI Express Connector Pinout  
PCI/104-Express Connector Pinout  
Connector Side Pin No.  
Pin Name  
SMCLK  
SMDAT  
JTAG1  
WAKE#  
RSVD  
PETp0  
PETn0  
PETp1  
PETn1  
PETp2  
PETn2  
PETp3  
PETn3  
RSVD  
PETp4  
PETn4  
PETp5  
PETn5  
PETp6  
PETn6  
PETp7  
PETn7  
PETp8  
PETn8  
PETp9  
PETn9  
PETp10  
PETn10  
PETp11  
PETn11  
PETp12  
PETn12  
PETp13  
PETn13  
PETp14  
PETn14  
PETp15  
PETn15  
RSVD  
Pin No.  
Pin Name  
no connection  
no connection  
no connection  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
Side A  
5
6
9
11  
12  
14  
15  
19  
20  
23  
24  
27  
28  
30  
33  
34  
37  
38  
41  
42  
45  
46  
50  
51  
54  
55  
58  
59  
62  
63  
66  
67  
70  
71  
74  
75  
78  
79  
82  
53  
Reserved / WAKE#  
no connection  
PEx1_0Tp OR PEx16_0T(0)p  
PEx1_0Tn OR PEx16_0T(0)n  
PEx16_0T(1)p  
PEx16_0T(1)n  
PEx16_0T(2)p  
PEx16_0T(2)n  
PEx16_0T(3)p  
PEx16_0T(3)n  
no connection  
PEx16_0T(4)p  
PEx16_0T(4)n  
PEx16_0T(5)p  
PEx16_0T(5)n  
PEx16_0T(6)p  
PEx16_0T(6)n  
PEx16_0T(7)p  
PEx16_0T(7)n  
PEx16_0T(8)p  
PEx16_0T(8)n  
PEx16_0T(9)p  
PEx16_0T(9)n  
PEx16_0T(10)p  
PEx16_0T(10)n  
PEx16_0T(11)p  
PEx16_0T(11)n  
PEx16_0T(12)p  
PEx16_0T(12)n  
PEx16_0T(13)p  
PEx16_0T(13)n  
PEx16_0T(14)p  
PEx16_0T(14)n  
PEx16_0T(15)p  
PEx16_0T(15)n  
no connection  
12 OR 58  
14 OR 60  
64  
65  
70  
72  
76  
78  
82  
84  
88  
90  
94  
96  
100  
102  
57  
59  
63  
65  
69  
71  
75  
77  
81  
83  
87  
89  
93  
95  
99  
101  
CTIM-00054 (0.01) 3/26/2010  
6
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PCI/104-Express to PCI Express Adapter  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
Side B  
5
6
7
8
JTAG2  
JTAG3  
JTAG4  
JTAG5  
PERST#  
REFCLK+  
REFCLK-  
PERp0  
PERn0  
RSVD  
PERp1  
PERn1  
PERp2  
PERn2  
PERp3  
PERn3  
RSVD  
no connection  
no connection  
no connection  
no connection  
11  
13  
14  
16  
17  
19  
21  
22  
25  
26  
29  
30  
32  
33  
35  
36  
39  
40  
43  
44  
47  
48  
50  
52  
53  
56  
57  
60  
61  
64  
65  
68  
69  
72  
73  
76  
77  
80  
81  
2
PE_RST#  
36 OR 48  
38 OR 50  
24 OR 110  
26 OR 112  
PEx1_0Clkp OR PEx16_x8_x4_Clkp  
PEx1_0Clkn OR PEx16_x8_x4_Clkn  
PEx1_0Rp OR PEx16_0R(0)p  
PEx1_0Rn OR PEx16_0R(0)n  
no connection  
116  
118  
122  
124  
128  
130  
PEx16_0R(1)p  
PEx16_0R(1)n  
PEx16_0R(2)p  
PEx16_0R(2)n  
PEx16_0R(3)p  
PEx16_0R(3)n  
no connection  
no connection  
RSVD  
PERp4  
PERn4  
PERp5  
PERn5  
PERp6  
PERn6  
PERp7  
PERn7  
RSVD  
PERp8  
PERn8  
PERp9  
PERn9  
PERp10  
PERn10  
PERp11  
PERn11  
PERp12  
PERn12  
PERp13  
PERn13  
PERp14  
PERn14  
PERp15  
PERn15  
134  
136  
140  
142  
146  
148  
152  
154  
PEx16_0R(4)p  
PEx16_0R(4)n  
PEx16_0R(5)p  
PEx16_0R(5)n  
PEx16_0R(6)p  
PEx16_0R(6)n  
PEx16_0R(7)p  
PEx16_0R(7)n  
no connection  
109  
111  
115  
117  
121  
123  
127  
129  
133  
135  
139  
141  
145  
147  
151  
153  
PEx16_0R(8)p  
PEx16_0R(8)n  
PEx16_0R(9)p  
PEx16_0R(9)n  
PEx16_0R(10)p  
PEx16_0R(10)n  
PEx16_0R(11)p  
PEx16_0R(11)n  
PEx16_0R(12)p  
PEx16_0R(12)n  
PEx16_0R(13)p  
PEx16_0R(13)n  
PEx16_0R(14)p  
PEx16_0R(14)n  
PEx16_0R(15)p  
PEx16_0R(15)n  
Table 1 PCI/104-Express to PCI/Express Pinout  
All Pin Names have been referenced from the official specifications provided by PCI-SIG and the PC/104 Consortium.  
7
CTIM-00054 (0.01) 3/26/2010  
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCI/104-Express to PCI Express Adapter  
4. PCI/104-Express SBC Compatibility  
Connect Tech's PCI/104-Express to PCI Express Adapter (ADG017 and ADG020) boards enable users to  
install a x1, x4, x8 or x16 lane PCI Express card in a PCI/104-Express stack. This however can only be done  
when the adapter is used on the TOP of the stack. Certain CPU boards only populate the PCI/104-Express  
connector on the bottom side of the board, allowing for a stack down configuration only. In this case the  
Connect Tech adapter cannot be used. Below is a compatibility list of all PCI/104-Express CPU boards that  
are on the market at the time this document was created.  
To view the most recent list, please refer to our online Knowledge Database Document which can be found  
List of Compatible CPU Boards with the ADG017 and ADG020 Adapters  
AAEON Technology  
EPIC-9457  
Digital-Logic / Kontron  
MSM200XU  
LiPPERT Embedded Computers  
Cool XpressRunner-GS45  
RTD Embedded Technologies  
CMA22MVD  
CMA22MCS  
SBS Science and Technology  
SCM8020  
Sundance Multiprocessor Technology  
SMT100  
List of Incompatible CPU Boards with the ADG017 and ADG020 Adapters  
AAEON Technology  
PFM-945C  
Digital-Logic / Kontron  
MSM200XP  
MSM945P  
MSMG45P  
E.E.P.D.  
PROFIVE M2  
Please see Connect Tech’s ADG021 Adapter for Bottom Stacking SBC’s  
CTIM-00054 (0.01) 3/26/2010  
8
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PCI/104-Express to PCI Express Adapter  
5. Power Notes  
Some PCI/104-Express SBC systems will not come with +3.3V power over the PCI/104-Express connector.  
If this is the case, enable jumper block J1 Position A** (See errata) to enable the on board regulator to  
generate +3.3V (which is limited to 1.5A) for your PCI Express card. If the SBC you are using does provide  
+3.3V power, do not enable this jumper.  
PCI/104-Express Power Specifications  
Please refer to your PCI/104-Express SBC manual for actual ratings used.  
6. Product Errata  
ADG020 Limitations  
This product provides a single x1 lane PCI Express connection. PCI Express x4, x8 or x16 lane cards  
cannot be used. Please use the ADG017 board for this functionality.  
This product only provides +3.3V power to the PCI Express connector it does not provide any +12V.  
Please ensure your x1 PCI Express board does not use +12V. Please use the ADG017 for full +12V  
operation.  
Silkscreen Corrections **  
The silkscreen label for Jumper block J1 is incorrect on all Rev. A PCBs.  
It should read:  
Position A -  
ON:  
Use +3.3V regulator  
OFF:  
Use +3.3V from PCI/104-Express  
Position B -  
ON:  
OFF:  
Select x4, x8 or x16 Lane Link  
Select x1 Lane Link  
9
CTIM-00054 (0.01) 3/26/2010  
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PCI/104-Express to PCI Express Adapter  
Limited Lifetime Warranty  
Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this product, in  
Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc.  
will, at its option, repair or replace this product at no charge, provided that the product has not been subjected  
to abuse, misuse, accident, disaster or non Connect Tech Inc. authorized modification or repair.  
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business  
partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be  
pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the  
outside of the package and sent prepaid, insured and packaged for safe shipment. Connect Tech Inc. will  
return this product by prepaid shipment service.  
The Connect Tech Inc. lifetime warranty is defined as the serviceable life of the product. This is defined as  
the period during which all components are available. Should the product prove to be irreparable, Connect  
Tech Inc. reserves the right to substitute an equivalent product if available or to retract lifetime warranty if no  
replacement is available.  
The above warranty is the only warranty authorized by Connect Tech Inc. Under no circumstances will  
Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other  
incidental or consequential damages arising out of the use of, or inability to use, such product.  
Customer Support Overview  
If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech  
reseller from which you purchased the product. In most cases the reseller can help you with product  
installation and difficulties.  
In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist  
you. Our online Support Center is available 24 hours a day, seven days a week on our website at:  
for product manuals, installation guides, device driver software and technical tips. Submit your questions to  
our technical support engineers at [email protected]. Our technical support is always free.  
Contact Information  
Telephone/Facsimile  
Technical Support representatives are ready to answer your call Monday through Friday, from 8:30 a.m. to  
5:00 p.m. Eastern Standard Time. Our numbers for calls are:  
Toll: 800-426-8979 (North America only) | Tel: 519-836-1291 | Fax: 519-836-4878 (online 24 hours)  
Email/Internet  
You may contact us through the Internet. Our email and URL addresses are:  
Mail/Courier  
Connect Tech Inc.  
42 Arrow Road  
Guelph, Ontario, N1K 1S6, Canada  
CTIM-00054 (0.01) 3/26/2010  
10  
800-426-8979 | 519-836-1291  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     

Compur Carbon Monoxide Alarm Monitox plus User Manual
Cooper Lighting Landscape Lighting GRA25MWWXX User Manual
Craftsman Lawn Mower 385141 User Manual
CTX Computer Monitor PV520 User Manual
CyberData Network Card 010935B User Manual
Estate Washer ETW4400V User Manual
Extron electronic Stereo System 15HD User Manual
Fisher Price Car Seat V4553 User Manual
Fisher Price Hiking Equipment G8684 User Manual
Frigidaire Beverage Dispenser FFBC46F5L S User Manual