User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA OVERVIEW
CAMERA OVERVIEW
Top/Front
5
6
1
2
1. Power Button
2. Shutter Button
3. Flash
4. Lens/Lens Door
5. Viewfinder
7. Red-eye
Reduction LED/
Self-Timer LED/
AF Assist Light
3
7
8
8. Port Cover
9. Mini-USB port
10. TV-Out port
6. Flash Sensor
9
10
4
Bottom/Back
11. Flash Ready LED
12. Auto-Focus LED
13. Viewfinder
23. Wrist Strap Holder
24. Move to right /
11
12
18
19
Macro (
) Button
13
14. LCD
25. Speaker
15. LCD On/Off Button 26. Move down /
14
15
20
21
22
23
24
25
16. Tripod Socket
17. Battery/Memory
Card Door
18. Mode Switch
19. Thumbnail/Wide/
Tele Zoom Button
20. MENU Button
21. Move up /
Self-Timer (
Button
27. Memory Card Slot
28. Battery
Compartment
29. Move to left /
Continuous
)
26
16
27
28
29
30
31
Shot Button(
)
Flash (
22. OK Button
) Button 30. Reset Button
31. Delete Button
LCD ICONS
A
F
M
M
3
0001/0014
3
0001/0014
B
G
A
A
Camera Features
C
H
•
•
•
•
•
3.1 Megapixels, 2048 x 1536 Resolution
1.5” Color LCD
3x Optical Zoom
4x Digital Zoom
AVI Video at 20fps at 320x240 or 160x120
Resolution
I
J
AWB
AWB
D
E
K
•
•
•
•
•
7 Preset Scenes, 2 Picture Effects
Macro Mode
Continuous Shooting Mode
Self-timer
Multi-Area Auto-Focus or Center Spot
Auto-Focus
6 MB Internal Memory, SD Card Slot
Compatible with Windows® 98/98SE/
2000/ME/XP and Mac OS 9.0 or higher
A. Resolution
G. Frame Counter
H. Macro
I. Zoom Bar
J. Self-Timer
K. Memory Card
: Einzelbild
: Serienbild
: Wiedergabe
: Video Clips
B. Camera Mode
C. Flash / Scene
Selection
D. White Balance
E. Battery Level
F. Image Quality
•
•
: Sport
Download from Www.Somanuals.com. All Manuals Search And Download.
2
TABLE OF CONTENTS
CAMERA OVERVIEW ........................................................................................................................................... 2
Top/Front ........................................................................................................................................................ 2
Bottom/Back ................................................................................................................................................... 2
LCD Icons....................................................................................................................................................... 2
Camera Features............................................................................................................................................ 2
GETTING STARTED.............................................................................................................................................. 5
Attaching the Wrist Strap................................................................................................................................ 5
Loading the Batteries ..................................................................................................................................... 5
Turning the Camera On and Off..................................................................................................................... 5
Removing the Protective Plastic Film............................................................................................................. 5
Setting the Language, Date and Time............................................................................................................ 6
Checking the Battery Level ............................................................................................................................ 7
Turning the LCD On and Off .......................................................................................................................... 7
Internal Memory / Inserting the Memory Card ............................................................................................... 8
Setting the camera’s operational mode.......................................................................................................... 9
TAKING A PICTURE.............................................................................................................................................. 9
Taking Pictures with the Viewfinder................................................................................................................ 9
Taking Pictures with the LCD ...................................................................................................................... 10
Using the Auto Focus Lock ...........................................................................................................................11
Setting the Flash .......................................................................................................................................... 12
Using the Optical Zoom................................................................................................................................ 13
Using the Digital Zoom................................................................................................................................. 13
Taking Pictures in Macro Mode.................................................................................................................... 14
Taking Pictures in Continuous Mode ........................................................................................................... 14
Taking Pictures in Self-Timer Mode.............................................................................................................. 15
Using the Main Menu in Camera Mode ....................................................................................................... 16
•
Setting Capture Mode........................................................................................................................... 17
•
•
•
•
•
•
•
Taking Pictures in Sport Mode.............................................................................................................. 17
Setting Image Quality ........................................................................................................................... 18
Setting Image Resolution...................................................................................................................... 18
Selecting Scene Modes........................................................................................................................ 20
Setting White Balance .......................................................................................................................... 21
Selecting Photo Effect ......................................................................................................................... 21
Setting EV Compensation..................................................................................................................... 22
•
•
•
Setting ISO Sensitivity .......................................................................................................................... 23
Setting Metering Method....................................................................................................................... 24
Setting AF Mode .................................................................................................................................. 24
TAKING VIDEO CLIPS........................................................................................................................................ 25
Taking Video Clips ....................................................................................................................................... 25
Taking Video Clips in Self-timer Mode ......................................................................................................... 26
Using the Main Menu in Video Clip Mode.................................................................................................... 26
Setting Video Resolution .............................................................................................................................. 27
REVIEWING YOUR FILES .................................................................................................................................. 28
Using Review Mode ..................................................................................................................................... 28
Reviewing Pictures/Video Clips.................................................................................................................... 28
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Enlarging Stored Picture .............................................................................................................................. 29
Using Thumbnail View.................................................................................................................................. 30
Using the Delete Button ............................................................................................................................... 30
Using the Main Menu in Review Mode ........................................................................................................ 32
•
•
•
•
Deleting Files ........................................................................................................................................ 33
Using Slide Show.................................................................................................................................. 34
Transferring Files from Internal Memory to SD Card............................................................................ 36
Rotating Files ....................................................................................................................................... 36
CUSTOMIZING THE CAMERA SETTINGS......................................................................................................... 37
Setup Menu and Features............................................................................................................................ 39
Setting the Auto Off Time ............................................................................................................................. 39
Setting the Language ................................................................................................................................... 40
Setting the Date and Time............................................................................................................................ 40
Setting the LCD Brightness.......................................................................................................................... 40
Formatting Memory Card ............................................................................................................................. 41
Turning Beep On or Off................................................................................................................................ 42
Setting Quick View Interval .......................................................................................................................... 42
Setting AF Assist Light.................................................................................................................................. 43
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS....................................................................... 44
SOFTWARE INSTALLATION GUIDE.................................................................................................................. 45
Computer System Requirements ................................................................................................................. 45
Installation Requirements............................................................................................................................. 45
Using the Installer Splash Screen................................................................................................................ 46
Flow Diagram for Software Installation ........................................................................................................ 47
Identifying your Operating System ............................................................................................................... 48
Installing the Driver and DirectX 9 - Windows 98/98SE............................................................................... 49
Installing DirectX 9 - Windows 2000 ............................................................................................................ 51
Installing ArcSoft PhotoImpression - all Windows users.............................................................................. 52
Installing Adobe Acrobat Reader 5 - all Windows users (optional) .............................................................. 54
CONNECTING THE CAMERA TO THE COMPUTER ........................................................................................ 56
Downloading Pictures and Video Clips onto your Computer ....................................................................... 56
Using ArcSoft PhotoImpression.................................................................................................................... 57
Unplugging your Camera from the Computer .............................................................................................. 58
TV MODE............................................................................................................................................................. 59
Connecting the Camera to the Television .................................................................................................... 59
Using the TV as a Live Viewfinder ............................................................................................................... 59
Reviewing Pictures and Video Clips on your TV.......................................................................................... 59
ERROR MESSAGES........................................................................................................................................... 60
TROUBLESHOOTING......................................................................................................................................... 61
GETTING HELP................................................................................................................................................... 65
CAMERA SPECIFICATIONS............................................................................................................................... 68
SAFETY TIPS AND MAINTENANCE.................................................................................................................. 71
REGULATORY INFORMATION........................................................................................................................... 74
Download from Www.Somanuals.com. All Manuals Search And Download.
4
GETTING STARTED
GETTING STARTED
ATTACHING THE WRIST STRAP
Be sure to use the wrist strap to avoid dropping the camera accidentally. When carrying the camera by the strap,
don’t let it dangle to avoid shocks/damage to the exterior and/or interior of the camera.
1
2
3
LOADING THE BATTERIES
fig.1.1
fig.1.2
fig.1.3
The camera uses 2x AA alkaline, lithium or rechargeable batteries. Rechargeable Batteries (NiMH) are highly
recommended.
1. Slide the Battery/Memory Card door in the direction of the arrow, and lift it open. (fig.1.1)
2. Insert the batteries according to the polarity indication shown on the edge of the battery compartment.(fig.1.2)
3. Shut the Battery/Memory Card door by sliding it in the direction of the arrow, and close it securely. (fig.1.3)
TURNING THE CAMERA ON AND OFF
The Power Button is located at the top of the camera.
1. Press and hold the Power Button (
camera on.
) for more than 1 second to turn the
•
•
The JENOPTIK logo will appear on the LCD for about 2 seconds.
If the camera is in Camera Mode ( ) or Video Clip Mode ( ), the
lens cover will open, and the lens will extend out automatically to the
wide-angle position. Do not block the lens during extension.
The LCD will turn on automatically and display live view.
•
2. To turn the camera off, press the Power (
) Button.
Note: To extend battery life,
•
The LCD will turn off after 1 minute of inactivity. After the LCD is automatically turned off, the Flash
Ready LED blinks. Press any buttons to reactivate the LCD.
•
The camera will automatically power off after 2 minutes of inactivity by default.. Press and hold the
Power (
) Button for more than 1 second to turn the camera back on.
REMOVING THE PROTECTIVE PLASTIC FILM
To prevent the LCD from possible scratches or damages during transportation, the LCD is covered with a clear
plastic film. Remember to remove the protective film for a clearer view of the subject when taking pictures.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
GETTING STARTED
SETTING THE LANGUAGE, DATE AND TIME
When the camera is powered on for the first time, the Language, Date and Time menus will appear.
DATE/TIME SETUP
01 - 01 - 2004
01 : 01 AM
MM - DD - YYYY
12 - HOUR
RETURN
OK SET
fig. 1.1
fig. 1.2
1. Press
or
to highlight the desired language. (fig. 1.1)
2. Press the OK button to select. The next screen will show the DATE/TIME SETUP page. (fig. 1.2)
3. Press to highlight the Date field, the Time field, the Date Format field or the Time Format field. The
selected segment will blink.
4. Press or to change the number in the blinking position, press
to go to the next field.
5. Press the OK button to exit DATE/TIME setting. The next screen will display live view.
Note:
1. For each language, there is a default setting on Date format and TV broadcast standard. To change the TV
broadcast standard, refer to page 59..
Language(s)
Date Format Setting
MM/DD/YYYY
TV Broadcast Standards
English / Español /
NTSC
Francis / Deutsch
/Italiano/ Nederlands/Português
DD/MM/YYYY
YYYY/MM/DD
PAL
PAL
2. If the batteries are removed or flat for about 4 minutes, the time setting will resume to factory settings. When
the camera is powered on again, the DATE/TIME setup screen will appear on the LCD. To reset date/time,
follow steps 2-5 above; to skip the date/time setting, press the OK button. You can set the date/time at a later
time. For instructions, refer to p.40.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
GETTING STARTED
CHECKING THE BATTERY POWER LEVEL
The battery power level indicator represents the level of power of the batteries. The meaning of each icon is as
follows:
Battery power is
Battery power is
not full, but it is still
sufficient for camera
operations.
Batteries are fully
charged.
running low. Prepare
a fresh set of
batteries.
Battery power is low.
Replace or recharge
(rechargeable
batteries only) as soon
as possible.
Batteries are flat.
Replace them
immediately.
Note:
• The camera’s battery level indicator may not accurately reflect the actual power condition of the
rechargeable batteries, even if they have been fully recharged. This is an inherent problem with
rechargeable batteries, which is not related to the performance of the camera. For better performance,
Ni-MH rechargeable batteries are recommended.
• Be sure to remove the batteries if the camera will not be used for an extended period of time to prevent
corrosion or battery leakage.
TURNING THE LCD/ICONS ON OR OFF
The camera is featured with a 1.5”LCD that is highly convenient for framing subjects during image/video capture,
reviewing stored images/video clips, and for on-screen display of the camera’s current settings.
M
4
28/45
A
N
AWB
Icons off
LCD off
LCD on with icons
Press the (
) button repeatedly to toggle between the different LCD modes.
Note:
•
•
To save battery power, it is recommended to turn off the LCD display.
After one minute of inactivity, the LCD will automatically power off. When the LCD is auto-powered off,
the flash LED blinks. Press any button to resume the LCD.
•
In (
) Review Mode, only the LCD icons can be turned on or off.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
GETTING STARTED
INTERNAL MEMORY/INSERTING THE MEMORY CARD
Internal Memory
The camera is equipped with 6 MB of internal memory that can be used for storage as soon as you start taking
pictures or recording video clips.
Status
Memory in Use
Internal Memory
Memory Card
Memory card is not inserted.
Memory card is inserted.
NOTE!: The files stored in the internal memory will remain there until the Transferring Files option is
selected. Refer to the Transferring Files section on page 35.
Inserting the Memory Card
fig.1.1
fig.1.2
fig.1.3
In addition to the 6 MB internal memory, the camera can use a Secure Digital (SD) memory card to store
images and/or video clips.
1. Slide the Battery/Memory Card door in the direction of the arrow and lift it open. (fig. 1.1)
2. Insert the memory card in the direction as shown in fig.1.2, then gently, but firmly push the SD card into the
slot as far as possible. NEVER forcefully push the card into the camera to avoid damaging both the card
and/or the camera. When the card is fully engaged, a click can be heard.
3. Close the Battery/Memory Card door properly and securely. (fig. 1.3)
After inserting the SD card, power on the camera, and the SD card will be checked for its compatibility with the
camera. If it is compatible, the camera will immediately accept it for storage. Otherwise, the camera will prompt
you to format the card before usage. To format the SD card, refer to p. 41.
Removing the Memory Card
1. Gently push the edge of the memory card with your fingertip to eject it.
2. Carefully pull out the card.
If the SD card is locked when the camera is powered on, the Shutter Button will be disabled. In this case, power
off the camera first, take out the SD card, gently slide the switch to unlock it, then reload the SD card into the
camera.
Note:
•
•
Do not touch the metal contact plate of the SD card.
The camera can support SD cards with storage capability of up to 512 MB.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
GETTING STARTED / TAKING A PICTURE
SETTING THE CAMERA’S OPERATIONAL MODES
The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.
To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
Camera Mode
Review Mode
Video Mode
For taking pictures or
customizing your camera
settings for picture taking.
For browsing images and
video clips, deleting images
and video clips, playing
a slide show, transferring
images and/or video clips
from the internal memory
to the SD card, or rotating
images.
For recording video clips or
customizing camera settings
for video-clip recording.
TAKING PICTURES
LIVE VIEW THROUGH THE VIEWFINDER
M
M
4
4
28/45
28/45
A
A
fig.1.1
fig.1.2
fig.1.3
1. Turn the camera on.
2. Set it to (
) Camera Mode.
(To save battery power, press the (
) button to turn off the LCD display).
3. Aim the camera at the subject, then look through the Viewfinder to frame the desired object(s) to be included
in the photo. (fig.1.1)
Note: For better results, stand at least 2 ft (0.6m) away from the subject.
4. Press and hold the Shutter button halfway down to activate the Auto-Focus function until the green AF LED
stops blinking and the AF frame on the LCD changes to green. (fig.1.2)
(The camera will automatically determine the best focus, and a rapid click can be heard.)
5. Hold the camera steady with both hands, then firmly press the Shutter button down fully to capture the
image. (fig.1.3)
•
•
When the image is captured, a beep can be heard.
After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate
that the image is being stored.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
TAKING A PICTURE
Flash Ready LED
Lit
Blinking
The camera is
recording a video clip.
The flash is recharging, or
LCD is in standby mode.
Note: When the camera is capturing or storing a picture or video clip, do not power the camera off; otherwise,
the picture or video clip may become corrupted.
LIVE VIEW THROUGH THE LCD
M
3
28/45
A
AWB
M
4
M
28/45
4
28/45
A
A
fig. 1.1
fig. 1.2
fig. 1.3
1. Turn the camera on.
2. Set it to (
) Camera Mode.
(If the LCD display is turned off, press the (
) button repeatedly until the LCD display is on).
3. Aim the camera at the subject, then look at the LCD to frame the desired object(s) to be included in the
photo. (fig.1.1)
Note: For better results, stand at least 2 ft (0.6m) away from the subject in Normal Mode.
4. Press the Shutter button halfway down to activate the Auto-Focus function until the green AF LED stops
blinking and the AF frame on the LCD changes to green. (fig.1.2)
(The camera will automatically determine the best focus, and a rapid click can be heard.)
Note:
•
•
For more information on Focus Lock, refer to p. 11.
To change AF mode, refer to p. 24.
5. Hold the camera steady with both hands, then press and hold the Shutter button down fully to capture the
image. (fig.1.3)
•
•
When the image is captured, a beep can be heard.
After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate that
the image is being stored.
•
•
A preview of the image will be displayed on the LCD for a second. To change the preview time, refer to p. 42.
The picture counter number displayed in the LCD will be updated.
6. If you are not satisfied with the captured image, simply press (
more information, refer to p. 30.
) button to delete it before it is saved. For
Download from Www.Somanuals.com. All Manuals Search And Download.
10
TAKING A PICTURE
USING AUTO-FOCUS LOCK
When the subject is not located at the center of the picture, use this feature to lock the focus on the subject
before using the usual procedures to take a picture.
Auto-Focus LED
When the Shutter button is pressed halfway, the Auto-Focus feature will be activated and the Auto Focus
(green) LED will display the status of the Auto-Focus lock.
Blinking
Lit
The camera is adjusting
the focus.
The subject is in
focus.
Auto-Focus Frame
M
3
28/45
A
Auto-Focus Frame
AWB
AF Frame Color
Description
White
Green
Not in focus.
The subject(s) is in focus.
Using the focus lock:
M
3
M
3
28/45
28/45
A
A
AWB
AWB
28/45
28/45
fig. 1.1
fig. 1.2
fig. 1.3
fig. 1.4
1. Aim the camera so that the AF frame at the center of the LCD screen is positioned on the “off-centered”
subject . (fig.1.1)
2. Hold the camera steady with both hands, then press and hold the Shutter button halfway down until the AF
frame changes to green and the green AF LED stops blinking. (fig.1.2)
3. Recompose your picture. (fig.1.3)
(Be sure to press and hold the Shutter button down halfway while recomposing the picture.)
4. To capture the picture, press the Shutter button down fully. (fig.1.4)
Note: The AF LED will continue to blink in the following conditions:
1. There are several subjects at different distances within the focus lock area. Recompose the picture by
moving the camera slightly.
2. There is no color contrast. Recompose the picture with a subject that contains more color.
3. There is insufficient lighting. Increase the lighting in the surrounding area.
4. Please refer to P.11 to change Auto Focus mode and refer to P.24 to change AF assist light setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
TAKING A PICTURE
SETTING THE FLASH
M
3
M
3
28/45
28/45
A
AWB
AWB
fig. 1.1
fig. 1.2
fig. 1.3
To set the flash:
Press
/
repeatedly until the desired indicator appears on the LCD.
Flash Mode
Description
Auto Flash (Default)
The camera judges if a flash is required. If the environment is too dark,
the flash will fire.
A
A
Auto + Red-Eye
Use this mode to reduce the occurrence of “red-eyes” when taking pictures
with a flash. The camera will automatically detect when the flash is needed
and the flash will fire after a short delay.
Flash ON
Flash OFF
Flash will fire in any lighting condition. The “red-eye” reduction function also
included in this mode.
In this mode, the flash will not fire, regardless of the lighting condition. Use
this mode to capture the mood of ambient lighting. This mode is also useful
for places that prohibit flash photography, such as museums, aquarium,
archeological exhibitions, etc.
• To prevent blurry pictures in dim-lighting environment, hold the camera
steady when pressing the Shutter button or mount the camera on a tripod.
Note:
•
The flash needs to recharge after it is fired. If the Shutter button is pressed when the flash is
charging, the Flash Ready LED will blink. Wait for a short while, then press the Shutter button again to
take a picture.
•
Some of the scene selection will deactivate the flash setting. For more information, refer to p. 20.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
TAKING A PICTURE
USING THE OPTICAL ZOOM
The camera provides up to 3x optical zoom to take pictures.
M
M
3
3
28/45
28/45
A
AWB
AWB
fig. 1.1
fig. 1.2
fig. 1.3
1. Press T (Tele) to zoom in to your subject.
The optical zoom status is displayed in white in the zoom bar on the LCD(
).
2. Press W (Wide) to zoom out.
USING THE DIGITAL ZOOM
The camera also provides 4x Digital Zoom. Combined with the 3x Optical Zoom, it can provide up to 12x
magnification of your pictures.
M
3
28/45
A
AWB
fig. 1.1
fig. 1.2
How to use digital zoom:
1. Turn the LCD on.
2. Press T until the white optical zoom bar reached the mid-marker (
3. Continue to press T to activate the digital zoom. The digital zoom status is shown in blue in the zoom bar on
the LCD ( ).
Allow for a short delay before the digital zoom can be activated.
).
•
4. Press W to zoom out.
Activating/Deactivating Digital Zoom
SETUP
FORMAT
CAMERA MODE
DIGITAL ZOOM
SETUP
YES
NO
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN
SELECT
RETURN
SELECT
RETURN
OK SET
fig. 1.1
fig. 1.2
fig. 1.3
1. In Camera Mode, press MENU to display the Main Menu.
2. Press
3. Press
4. Press
repeatedly until SETUP is highlighted, then press
repeatedly until Digital Zoom is highlighted, then press
or to highlight Yes or No.
to enter its submenu.
to enter its submenu.
•
By default, it is set to On.
5. Press OK to select.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
TAKING A PICTURE
Important:
1. Hold your camera steady when using Digital Zoom to prevent blurred photos, caused by jittery movement. It
is recommended to either place your camera on a steady surface or mount it on a tripod.
2. The image quality may degrade slightly with Digital Zoom.
3. Digital Zoom can only be monitored with the LCD and not through the optical viewfinder.
TAKING PICTURES IN MACRO MODE (CLOSE-UP SHOTS)
This mode enables the camera to capture pictures in close distances.
M
3
28/45
A
AWB
1. Press the
2. Frame the subject in the LCD.
The best shooting range is between 15 cm to 60 cm. (5.9 in. – 23.6 in.)
button. The Macro icon (
) will be displayed on the LCD.
•
3. Press and hold the Shutter button halfway to activate the Auto-Focus function until the green AF LED stops
blinking and the AF frame changes to green.
4. Press the shutter button fully to take the picture.
Note:
1. When Macro Mode is selected, the camera will turn on the LCD if it is automatically turned off.
2. Zoom buttons do not work in Macro Mode.
TAKING CONTINUOUS SHOTS
This feature enables the camera to continuously capture 7 consecutive pictures with VGA (640x480) resolution
when the Shutter button is pressed and held.
M
3
28/45
A
AWB
1. Press the
button. The Continuous Shot icon (
) will be displayed on the LCD.
2. Frame the subject in the LCD screen, press and hold the Shutter button halfway to activate the Auto-Focus
function until the green AF LED stops blinking and the AF frame changes to green.
3. Press and hold the Shutter button down fully to capture the pictures.
•
The camera will automatically and continuously capture 7 consecutive images at approximately 3
images per second in 640 x 480 resolution.
4. To exit the Continuous Shot function, press the
button until
disappears from the LCD.
Note:
• In Continuous Shooting Mode the flash is disabled, as the recharging time will slow it down.
• The camera will only capture pictures in 640 x 480 resolution in Continuous Shooting Mode.
• The LCD will be blank when the images are taken in the Continuous Shooting Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
TAKING A PICTURE
TAKING PICTURES WITH SELF-TIMER
M
3
28/45
A
AWB
1. In (
) Camera Mode, press
button, the Self-Timer icon (
) will appear on the LCD.
2. Place the camera on a flat surface or tripod.
3. Use the LCD to compose the picture, then press the Shutter button to activate the Self-Timer.
The Self -Timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds, then the image will
be captured.
Note:
•
•
The Self-Timer is automatically deactivated once the image is taken.
To deactivate the Self-Timer before taking a picture, press
disappears from the LCD.
button until the Self-Timer icon (
)
Photography Hints -
Since the Self-Timer LED indicator at the front of the camera flashes, the photographer will have time to join in
the photograph and know when the camera has completed taking a picture when the Self-Timer LED light stops
blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
TAKING A PICTURE
USING THE MAIN MENU IN CAMERA MODE
CAPTURE MODE
+
RETURN
OK
SET
Q
QUALITY SETUP
FINE
IMAGE SIZE
NORMAL
ECONOMY
M
3
2
1
2048 x 1536
1600 x 1200
1024 x 768
640 x 480
M
M
V
RETURN
OK SET
RETURN
OK SET
CAMERA MODE
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
Q
SCENE SELECTION
SCENE SELECTION
WHITE BALANCE
OFF
PARTY / INDOOR
SNOW
RETURN
SELECT
WHITE BALANCE
AUTO
BEACH
AWB
SUNSET
SUNNY
CAMERA MODE
RETURN
OK SET
FLUORESCENT
TUNGSTEN
PICTURE EFFECT
EV COMPENSATION
ISO
+
–
SCENE SELECTION
NIGHT LANDSCAPE
FIREWORKS
RETURN
OK SET
METERING
AF
AUTO FOCUS
NIGHT PORTRAIT
PICTURE EFFECT
RETURN
SELECT
OFF
B&W
CAMERA MODE
RETURN
OK SET
SEPIA
SETUP
+
–
EV COMPENSATION
RETURN
OK SET
RETURN
SELECT
00 EV
ISO
–
+
OK SET
AUTO
100
200
400
RETURN
OK SET
METERING
SPOT
MATRIX
AF
AUTO-FOCUS
SPOT
RETURN
OK SET
MULTI-AREA
RETURN
OK SET
Download from Www.Somanuals.com. All Manuals Search And Download.
16
TAKING A PICTURE
USING THE MAIN MENU IN CAMERA MODE
Follow the steps below to set the advanced shooting options in the camera through the Main Menu.
1. Turn the camera on.
2. Set the camera to (
) Camera Mode.
3. Press the MENU button to display the Main Menu.
4. Press
5. Press
6. Press
or
to enter the submenu.
or repeatedly in the submenu to toggle between the options.
repeatedly until the desired option is highlighted.
7. Press the OK button to make a selection.
All selections will be marked by a red check mark.
8. To return to the previous menu, press
•
.
9. To exit the menu at any time, press the MENU button.
SETTING CAPTURE MODE
The capture mode menu has 4 features to choose for taking pictures.
Capture Mode Option
Description
(
(
) Single
The camera will take 1 picture at a time.
) Continuous Shooting
The camera will continuously take 7 consecutive pictures (at 640 x 480
resolution) when the Shutter button is fully pressed.
The flash is disabled in this mode.
(
(
) Sport
The camera will take 1 picture at a time in Sport Mode.
+
) Continuous Shooting The camera will continuously take 7 consecutive pictures in Sport Mode
with Sport
Note: Flash will be deactivated in Continuous Shooting Mode.
TAKING PICTURES IN SPORT MODE
This mode is used for taking pictures of sports and other high-speed activities. The camera will automatically
choose a higher shutter speed and wider aperture to capture fast-moving action to avoid blurriness.
Setting Sport Mode:
M
3
28/45
CAMERA MODE
A
CAPTURE MODE
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
Q
SCENE SELECTION
WHITE BALANCE
+
AWB
RETURN
SELECT
RETURN
OK SET
1. In the main menu, press
2. Press or to highlight Sport (
to enter the Capture Mode submenu.
) or Sport + Continuous Shooting (
+
).
3. Press OK to enter the mode.
Taking a picture in Sport Mode:
1. Frame the subject in the LCD.
2. Press and hold the Shutter button halfway to activate the focus until the green AF LED stops blinking and
the AF frame changes to green.
3. Press the Shutter button down fully to take the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
TAKING A PICTURE
Note: Hold your camera steady to prevent blurriness. It is recommended to either place your camera on a
flat, steady surface or mount it on a tripod.
SETTING IMAGE QUALITY
The Image Quality setting determines the amount of compression used to reduce the size of the stored image
file in order to economize space in the memory.
M
3
28/45
CAMERA MODE
Q
QUALITY SETUP
A
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
FINE
Q
NORMAL
ECONOMY
SCENE SELECTION
WHITE BALANCE
AWB
RETURN
SELECT
RETURN
OK SET
Quality
JPEG Compression Ratio
Description
Fine
4.5:1
11:1
Fine image quality can be used for making prints.
Normal
Normal image quality can be used for general purpose pictures.
(Default)
Economy
17:1
Economy image quality can be used for pictures that will be sent
via e-mail.
To change the image quality:
1. When ( ) QUALITY SETUP is highlighted, press
to enter the (
) Quality Setup submenu.
Q
Q
2. Press
or
repeatedly until the desired setting is highlighted.
3. Press the OK button to select the Quality Mode.
4. Press the MENU button to return to picture taking mode.
Note: The default Quality is set at NORMAL.
SETTING IMAGE RESOLUTION
Image Resolution determines the size of a captured image. Higher resolution images contain more details and
have larger file sizes.
M
3
28/45
IMAGE SIZE
2048 x 1536
A
CAMERA MODE
M
3
2
1
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
M
M
1600 x 1200
1024 x 768
640 x 480
Q
V
SCENE SELECTION
WHITE BALANCE
AWB
RETURN
OK SET
RETURN
SELECT
Images Stored on 6MB memory (approx.):
Resolution
Quality
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine (4.5:1)
4
8
6
14
32
55
36
79
Normal (11:1)
Economy (17:1)
13
23
15
130
Download from Www.Somanuals.com. All Manuals Search And Download.
18
TAKING A PICTURE
Images Stored on 16MB memory (approx.):
Resolution
Quality
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine
9
14
31
53
33
74
82
Normal
Economy
19
34
181
297
125
Images Stored on 32MB memory (approx.):
Resolution
Quality
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine
20
41
71
29
65
68
171
376
616
Normal
Economy
154
261
111
Images Stored on 64MB memory (approx.):
Resolution
Quality
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine
42
84
60
140
316
536
351
771
Normal
Economy
135
229
146
1270
Images Stored on 128MB memory (approx.):
Resolution
Quality
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine
83
119
268
455
279
628
698
1532
2512
Normal
Economy
167
290
1064
How to change the resolution:
1. When Resolution is highlighted in the Main Menu, press
2. Press or repeatedly until the desired setting is highlighted.
3. Press the OK button to select the mode
to enter the (
) Resolution submenu.
4. Press the MENU button to return to the picture-taking mode.
Note: The default image resolution is 3MP.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
TAKING A PICTURE
SELECTING SCENE MODES
The preset scene modes are helpful to quickly optimize the various settings to get the best capture of specific
scenes.
M
3
28/45
SCENE SELECTION
A
CAMERA MODE
OFF
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
PARTY / INDOOR
SNOW
Q
BEACH
SCENE SELECTION
WHITE BALANCE
AWB
SUNSET
RETURN
OK SET
RETURN
SELECT
Preset Scene
Description
Off (default)
Party/Indoor
No Scene Selection.
Use this mode to capture the details of candlelit scenes or other indoor
background lighting conditions.
Snow
Use this mode to capture snow scenes, and prevent the image from losing color.
Use this mode to capture the details in shining water scenes.
Beach
Sunset
This mode captures the deep hues and color variations in sunsets and sunrises.
Night Landscape
A slow shutter speed is used to capture the lights in night scenes.
Photography Tip: With the slower shutter speed, there is a possibility of causing
blurry images, due to camera movement.
To reduce the degree of blurriness, you may:
1. Set your camera to Night Landscape mode.
2. Place your camera on a tripod or sturdy surface area.
3. Set the camera to Self-Timer mode.
4. Press the shutter button.
Fireworks
Use this mode to capture the burst of light from fireworks with a slower shutter
speed.
Night Portrait
Use this mode to capture a subject illuminated with the lights in a night scene with
a slow shutter speed.
•
Due to the slow shutter speed, mount the camera onto a tripod for better picture
quality.
To set the scene selection:
1. When Scenes Select is highlighted, press
2. In the Scene menu, press or to choose between the options.
to enter its submenu.
3. Press the OK button to select the Scene Mode.
4. Press the MENU button to return to picture taking mode.
Note: Change of the flash setting will deactivate the scene setting selected in Scene Selection
Download from Www.Somanuals.com. All Manuals Search And Download.
20
TAKING A PICTURE
SETTING WHITE BALANCE
By default the camera uses Auto White Balance to reproduce colors under different lighting conditions. For
mixed lighting conditions, it is recommended to use the Auto White Balance option.
M
3
28/45
CAMERA MODE
WHITE BALANCE
AUTO
A
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
AWB
Q
SUNNY
FLUORESCENT
TUNGSTEN
SCENE SELECTION
WHITE BALANCE
AWB
RETURN
SELECT
RETURN
OK SET
White Balance Mode
Auto
Description
A
The camera will automatically choose the white balance setting. Use this
setting in variable conditions.
Sunny
For outdoors with sufficient sunlight.
Fluorescent
Tungsten
For indoors with fluorescent or ambient lighting conditions.
For indoors with tungsten lighting conditions.
To change the White Balance:
1. When White Balance is highlighted, press
2. Press or repeatedly until the desired setting is highlighted.
to enter its submenu.
3. Press the OK button to select the White Balance mode.
4. Press the MENU button to return to picture-taking mode.
SELECTING THE PICTURE EFFECT
You can shoot with different picture effects.
Picture Effect
Description
OFF (Default)
B&W
Taking pictures without effect.
Taking pictures in black and white.
SEPIA
Taking pictures in sepia tones like old pictures.
PICTURE EFFECT
CAMERA MODE
OFF
PICTURE EFFECT
EV COMPENSATION
ISO
+
B&W
SEPIA
–
METERING
AF
AUTO FOCUS
RETURN
OK SET
RETURN
SELECT
To set photo effect:
1. When Picture Effect is highlighted, press
to enter its submenu.
2. Press or repeatedly until the desired setting is highlighted.
3. Press the OK button to select the picture effect.
4. Press the MENU button to return to the picture-taking mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
TAKING A PICTURE
SETTING EXPOSURE COMPENSATION
The camera uses Auto Exposure to give well-exposed pictures under most lighting conditions. If the captured
picture of the main subject turns out to be too light or too dark, use the Exposure Compensation feature to
improve the exposure aspect.
M
3
+
EV COMPENSATION
28/45
–
CAMERA MODE
A
PICTURE EFFECT
EV COMPENSATION
ISO
+
–
00 EV
METERING
AF
–
+
AWB
AUTO FOCUS
OK SET
RETURN
SELECT
Exposure Compensation
Mode
Description
Increasing the Exposure in pictures that are too dark, will make the
picture lighter.
+
_
Decreasing the Exposure in pictures that are too light, will make the
picture darker.
To change the Exposure Compensation level:
+
1. Press
2. Press
3. Press
or
display the Exposure Compensation bar on the LCD.
or to change the Exposure Compensation between – 2.0 to +2.0.
repeatedly in the Main Menu until (
) Exposure Compensation is highlighted.
–
4. Press the OK button to select the desired value.
The camera will return to the picture-taking mode automatically after selection.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
22
TAKING A PICTURE
SETTING THE ISO SENSITIVITY
Raise the ISO speed when you wish to reduce jittery camera movement or to turn the flash off when shooting in
dark surroundings.
ISO Setting
Description
Auto (default)
Equivalent to setting of ISO 100 under normal conditions. When lighting is poor,
camera raises sensitivity automatically to compensate.
100
200
100 is best for shooting clear, sharp images in daylight.
200 is ideal for shooting in cloudy situations.
400
400 is best for shooting in dark surroundings, for example, especially at night.
Note: Higher ISO speeds increase image noise. To take clean images, use as low an ISO speed as
possible.
TO CHANGE ISO SETTING:
ISO
AUTO
CAMERA MODE
PICTURE EFFECT
EV COMPENSATION
ISO
+
100
200
400
–
METERING
AF
AUTO FOCUS
RETURN
OK SET
RETURN
SELECT
1. When (
2. Press
) ISO is highlighted, press
or repeatedly until the desired setting is highlighted.
to enter its submenu.
3. Press the OK button to select the ISO setting.
4. Press the MENU button to return to the picture-taking mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
TAKING A PICTURE
SETTING LIGHT METERING MODE
You can choose the desired part of the image to use for measuring the brightness and determine the exposure.
Metering Mode
Spot
Description
Meters the light in the center area of the image. Use this mode when the subject is
backlit or surrounded by strong light.
Matrix(default)
Metering the light in different zones. Use this mode when the lighting condition
is complex. The camera can adjust the settings to correct exposure for the main
subject by metering the position of the subject, the brightness, the direct light, and
the backlighting etc.
To change Light Metering mode:
METERING
SPOT
CAMERA MODE
PICTURE EFFECT
EV COMPENSATION
ISO
+
MATRIX
–
METERING
AF
AUTO FOCUS
RETURN
OK SET
RETURN
SELECT
1. When (
2. Press
) Metering is highlighted, press
or
to enter its submenu.
repeatedly until the desired setting is highlighted.
3. Press the OK button to select the Metering Mode.
4. Press the MENU button to return to the picture-taking mode.
SETTING AUTO FOCUS (AF) MODE
The camera provides two AF modes to perform the Auto Focus function.
AF Mode
Spot
Description
In this mode, the camera uses the center zone of the subject to perform auto
focusing. Use this mode when you want to focus only what you aim at.
Multi-Area (default)
To set AF mode:
In this mode, the camera automatically determines which area (center,
upper-left, upper-right, lower-left, lower-right) is best to perform the auto
focusing function. Use this mode when the lighting condition is complex.
AF
AUTO-FOCUS
CAMERA MODE
SPOT
PICTURE EFFECT
EV COMPENSATION
ISO
+
MULTI-AREA
–
METERING
AF
AUTO FOCUS
RETURN
OK SET
RETURN
SELECT
1. When AF mode is highlighted, press
to enter its submenu.
2. Press or repeatedly until the desired setting is highlighted.
3. Press the OK button to select the AF Mode.
4. Press the MENU button to return to picture taking mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
TAKING VIDEO CLIPS
TAKING VIDEO CLIPS
TAKING VIDEO CLIPS
28 SEC
Press Shutter to Record
To record a video clip:
1. Slide the Mode Switch to (
) Video Clip Mode.
• The time limit is showed on the upper-right corner of the screen.
2. Position the subject in the LCD.
3. Press the Shutter button down fully to start recording a video clip. The time recorded will be shown on LCD.
The camera records a video clip until the memory is full.
To stop recording:
1. Press the Shutter button again to stop recording.
OR
2. The camera will stop recording only after the memory is full.
1 SEC
Video Clip Information
Press Shutter to Stop
Resolution: QVGA (320x240) or QQVGA (160x120) (Best for e-mail)
Frame rate: 20fps
File Format: AVI (Motion Picture)
Note:
•
Do not open the battery door or turn the camera off when recording. Otherwise, the video clip may not be
stored.
•
•
Higher capacity memory cards can record video clips for a longer duration.
The Flash, Macro, and Continuous Shooting are deactivated in Video Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
TAKING VIDEO CLIPS
RECORDING A VIDEO CLIP WITH THE SELF-TIMER
28 SEC
Press Shutter to Record
1. In the (
) Video Clip Mode, press
button, and the Self-Timer icon (
) will appear on the LCD.
2. Place the camera on a flat surface or mount it on a tripod.
3. Use the LCD to compose the picture, then press the Shutter button to activate the Self-Timer.
The Self -Timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds then starts recording.
4. Press the Shutter button again to stop recording. Otherwise, the camera will continue to record until the
memory limit is reached.
USING THE MAIN MENU IN VIDEO CLIP MODE
WHITE BALANCE
AWB
AWB
PICTURE EFFECT
SUNNY
OFF
FLUORESCENT
TUNGSTEN
B&W
SEPIA
RETURN
OK SET
VIDEO MODE
WHITE BALANCE
PICTURE EFFECTS
EV COMPENSATION
METERING
RETURN
OK SET
+
–
+
–
EV COMPENSATION
VIDEO RESOLUTION
RETURN
SELECT
00 EV
–
+
OK SET
METERING
SPOT
MATRIX
RETURN
OK SET
How to Use the Main Menu in Video Clip Mode:
1. Turn the camera on.
VIDEO RESOLUTION
320x240
2. Set the mode switch to (
) Video Clip mode.
160x120
3. Press the MENU button to display the main menu.
4. Press
5. Press
6. Press
or
to enter the submenu.
or in the submenu to toggle between the options.
until the desired option is highlighted.
RETURN
OK SET
7. Press the OK button to make a selection.
All selections will be marked by a red check mark.
8. To return to the previous menu, press
9. To exit the menu at any time, press the MENU button.
•
.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
TAKING VIDEO CLIPS
Note:
•
•
•
•
To understand the differences between the various White Balance settings, refer to p.21.
To set the different Picture Effects, refer to p.21.
For more information about Exposure Compensation, refer to p.22.
For more information about Metering differences, refer to p.24.
SETTING VIDEO CLIP RESOLUTION
Note: 160x120 resolution is ideal for email.
To change the video resolution:
VIDEO MODE
VIDEO RESOLUTION
320x240
WHITE BALANCE
PICTURE EFFECTS
+
160x120
EV COMPENSATION
METERING
–
VIDEO RESOLUTION
RETURN
SELECT
RETURN
OK SET
1. When Video Resolution is highlighted in the Main Menu, press
2. Press or repeatedly until the desired setting is highlighted.
to enter the (
) Resolution submenu.
3. Press the OK button to select the mode
4. Press the MENU button to return to video clip mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
REVIEWING YOUR FILES
REVIEWING YOUR FILES
REVIEWING THE PICTURES/VIDEO CLIPS
In (
) review mode, you can review your stored pictures and video clips through the LCD.
Note: When a memory card is inserted into the camera, only the pictures stored in the memory card will
be displayed in the Review Mode. To view the pictures in the internal memory, ttransfer files from internal
memory to the SD card (refer to p.35). Or turn the camera off, remove the memory card, and then turn the
camera back on.
To review pictures/video clips:
M
3
0001/0003
0001/0003
JPEG
AVI
Press OK to view/pause Video
2004:03:30 13:30:41
2004:03:30 13:30:41
1. Slide the Mode Switch towards (
) . The lens will retract in Review Mode.
2. Press or repeatedly to scroll through each file.
•
The file type and frame counter will be displayed on the LCD.
0001/0003
File Indication
JPEG
File Type
Still Picture
Video Clip
Number of total pictures /video clips
Number of current picture/video clip
AVI
3. When a Video Clip Icon (AVI) is displayed on the LCD, press the OK button to play the video clip.
Note: Press the OK button to pause or resume playing video clip.
To stop playing the video clip, press the Shutter button.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
REVIEWING YOUR FILES
ENLARGING THE PICTURES
In (
) Review Mode, you can enlarge your pictures to take a closer look at the subject on the LCD. This
feature is for viewing purposes only and will not affect the stored image.
X2
X4
2x Enlargement
4x Enlargement
Resolution
2048 x 1536
1600 x 1200
1024 x 768
640 x 480
Maximum Enlargement
4x
4x
4x
2x
To enlarge:
1. In ( ) Review Mode, press
or
repeatedly to scroll through the stored pictures and video clips.
2. While viewing a stored still picture, press the T button for different magnifications.
3. Press or to navigate around the picture. When the picture can pan no farther in one
,
,
direction, the directional arrow will disappear.
4. Press W button to zoom out.
Note: Video Clips cannot be magnified.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
REVIEWING YOUR FILES
REVIEWING YOUR FILES IN THUMBNAIL
The thumbnail view can be accessed in (
) Review Mode by pressing either Menu or Wide button.
M
3
0001/0003
JPEG
MENU 0012/0012
2004:03:30 13:30:41
fig. 1.1
fig. 1.2
Using the Quick Access Button:
1. In the (
display in a few seconds. (fig. 1.2) The first file will be shown first.
2. Press or repeatedly to look through all the pictures and video clips. The selected picture
) Review Mode, press W button, nine thumbnail images or video clips will appear on the LCD
,
,
or video clip will be highlighted by a red border.
3. Press the OK button to view the picture or video clip in full screen.
Using the review menu:
1. In (
2. Press
3. Press
) Review Mode, press MENU to enter Review Menu.
or repeatedly to highlight Thumbnail.
button to have nine thumbnail images or video clips appear at once
REVIEW
DELETE FILE
THUMBNAIL
SLIDE SHOW
FILE TRANSFER
ROTATE
on the LCD display.
4. Press
video clips.
5. Press the OK button to view the picture or video clip in full screen. Or press
MENU button to return to the previous screen.
1
2
,
,
or
repeatedly to look through all the pictures and
RETURN
SELECT
USING THE DELETE BUTTON TO DELETE YOUR FILES
You can delete your files in Quick View, Thumbnail or in Review Mode by using the Delete button.
Note: Once a file is deleted, it cannot be recovered.
Are You Sure?
No
Yes
OK SELECT
Deleting in Quick View Mode (Camera Mode)
1. In the (
satisfied with the picture, press the
Note: To change the Quick View time, refer to p.42.
2. Press or to highlight No or Yes.
3. Press the OK button to confirm selection.
) Camera Mode, after a picture is taken, the LCD will show the picture for a second. If you are not
button, the screen will display the message “Are you sure?”
•
•
If Yes is selected, the picture will be deleted.
If No is selected, the picture will be saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
REVIEWING YOUR FILES
Deleting in Review Mode
Delete One
1. In (
) Review Mode, press
button once, the screen will display the message “Are you sure?”
2. Press
or to highlight No or Yes.
3. Press the OK button to select.
•
•
If No is selected, no change will be made, and the camera will return to the Review Mode.
If Yes is selected, the file will be deleted.
Delete All
1. In (
) Review Mode, press
button twice, the screen will display the message “Delete All, Are you sure?”
2. Press
or to highlight No or Yes.
3. Press the OK button to select.
•
•
If No is selected, no change will be made, and the camera will return to the Review Mode.
If Yes is selected, all the files will be deleted.
Deleting in Thumbnail Review Mode
1. When thumbnail view is displayed (refer to P.30), select the image you want to delete, then press
the LCD shows the image in full screen and asks “Are You Sure?”
button,
2. Press
or
to highlight No or Yes.
3. Press the OK button to confirm selection.
•
•
If No is selected, no change will be made, and the LCD will return to the Thumbnail View Mode.
If Yes is selected, the selected file will be deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
REVIEWING YOUR FILES
USING THE REVIEW MENU
DELETE FILE
DELETE ONE
Are You Sure?
DELETE ALL
No
Yes
REVIEW
SELECT
OK
DELETE FILE
RETURN
SELECT
THUMBNAIL
1
SLIDE SHOW
2
FILE TRANSFER
ROTATE
RETURN
SELECT
0012/0012
1
2
DELAY INTERVAL
SEC
SEC
SLIDE SHOW
2
START SLIDE SHOW
DELAY INTERVAL
2
5
5
CONTINUOUS REPEAT
10
30
10 SEC
30 SEC
RETURN
SELECT
RETURN
SELECT
CONTINUOUS REPEAT
Transfer all files
from internal memory
to memory card?
Yes
No
No
Yes
RETURN
SELECT
OK SELECT
How to use the Menu in Review mode:
1. Turn the camera on.
2. Set the Mode Switch to (
) Review Mode.
3. Press the MENU button to display the Main Menu.
4. Press
5. Press
6. Press
or
to enter its submenu.
or in the submenu to toggle between the options.
repeatedly until the desired option is highlighted.
7. Press the OK button to make a selection.
All selections will be marked by a red check mark.
8. To exit the menu, press
9. To exit the menu at any time, press the MENU button.
•
.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
REVIEWING YOUR FILES
DELETING YOUR FILES
Note: Once the files are deleted, they cannot be recovered.
Deleting One File by Using the Review Menu
DELETE FILE
DELETE ONE
DELETE ALL
Are You Sure?
No
Yes
RETURN
SELECT
OK SELECT
DELETE OK
1. In (
) Review Mode, press the MENU button to enter Review Menu.
or to highlight Delete File.
to enter its submenu.
2. Press
3. Press
4. Press
5. Press
or
or
to highlight Delete One, then press OK. This LCD shows the images/video clips in thumbnail.
to highlight the file you want to delete.
6. Press OK button. The next screen will read “Are You Sure?”
7. Press or to highlight No or Yes.
8. Press the OK button to confirm selection.
•
•
If No is selected, no change will be made, and the camera will return to the Thumbnail View Mode.
If Yes is selected, the selected file will be deleted, and the LCD return to the Thumbnail View Mode.
Deleting All Files
M
3
DELETE FILE
DELETE ONE
0001/0003
JPEG
Are You Sure?
DELETE ALL
No
Yes
RETURN
SELECT
OK
SELECT
2004:03:30 13:30:41
1. In (
) Review Mode, press MENU to enter Review Menu.
or to highlight Delete File.
to enter its submenu.
or to highlight Delete All.
2. Press
3. Press
4. Press
5. Press OK . The next screen will display the message “Are You Sure?”
6. Press or to highlight No or Yes.
7. Press the OK button to confirm selection.
•
•
If No is selected, no change will be made, and the LCD will return to the previous screen.
If Yes is selected, all files will be deleted. The LCD will show “No Files!”
Download from Www.Somanuals.com. All Manuals Search And Download.
33
TROUBLESHOOTING
RUNNING A SLIDE SHOW
Use the Slide Show feature to automatically display your pictures and videos on the camera LCD screen at a
selectable interval rate. You can also run a Slide Show on any video device that is equipped with a video input,
such as a television or digital projector.
The Slide Show feature is available when you have at least one picture stored.
1
M
2
SLIDE SHOW
3
REVIEW
0001/0003
START SLIDE SHOW
DELAY INTERVAL
JPEG
DELETE FILE
THUMBNAIL
SLIDE SHOW
FILE TRANSFER
ROTATE
1
2
CONTINUOUS REPEAT
RETURN
SELECT
RETURN
SELECT
2004:03:30 13:30:41
To run a slide show:
1. In (
) Review Mode, press MENU to enter Review Menu.
or repeatedly to select and highlight Slide Show..
to enter its submenu.
2. Press
3. Press
4. Press
when Start Slide Show is highlighted to begin the Slide Show.
•
Pictures: Each picture will be shown for 2 seconds. To change the display interval, refer to the instructions
below.
•
Video clips: Only the first frame of the video clip will be shown.
5. Press
6. Press
or
or
once to speed up or slow down the Slide Show.
to skip to the previous or next image.
7. Press OK to pause or resume Slide Show.
8. To quit the Slide Show, press the Menu button.
Note: When an SD memory card is inserted into the camera, only the pictures stored in the memory card
will be displayed. To view the pictures in the internal memory, transfer the files onto the SD card or remove
the SD card(p.35).
Download from Www.Somanuals.com. All Manuals Search And Download.
34
REVIEWING YOUR FILES
To set the slide show time interval:
The default slide show interval is 2 seconds. You may change the time following the steps below:
1
2
SLIDE SHOW
DELAY INTERVAL
SEC
SEC
REVIEW
START SLIDE SHOW
DELAY INTERVAL
2
DELETE FILE
THUMBNAIL
SLIDE SHOW
FILE TRANSFER
ROTATE
2
5
5
1
2
CONTINUOUS REPEAT
10
30
10 SEC
30 SEC
RETURN
SELECT
RETURN
SELECT
RETURN
SELECT
1. In (
) Review Mode, press MENU to enter Review Menu.
or repeatedly to select and highlight Slide Show.
to enter its submenu.
2. Press
3. Press
4. Press
5. Press
6. Press
or
to highlight Delay Interval.
to enter the submenu.
or
to select the length of time for each picture to be displayed on the LCD: 2, 5, 10 or 30
seconds.
7. Press OK to select.
8. Press
to return to the previous menu. Or press MENU to exit.
To repeat a slide show
By default, the Slide Show will stop automatically when the last frame is played. However, you can set the
camera to play the Slide Show repeatedly by following the steps below:
1
REVIEW
2
SLIDE SHOW
CONTINUOUS REPEAT
START SLIDE SHOW
DELAY INTERVAL
DELETE FILE
THUMBNAIL
SLIDE SHOW
FILE TRANSFER
ROTATE
Yes
No
1
2
CONTINUOUS REPEAT
RETURN
SELECT
RETURN
SELECT
RETURN
SELECT
1. In (
) Review Mode, press MENU to enter Review Menu.
or repeatedly to select and highlight Slide Show.
to enter its submenu.
2. Press
3. Press
4. Press
5. Press
6. Press
or
repeatedly to select and highlight Continuous Repeat.
to enter the submenu.
or
to select Yes or No.
•
If Yes is selected, the camera will play the Slide Show repeatedly after you started playing a Slide Show.
7. Press OK to select.
8. Press
to return to the previous menu. Or press MENU to exit.
TRANSFERRING FILES FROM INTERNAL MEMORY TO SD CARD
The camera can transfer photos and video clips that are stored in the camera’s internal memory to an SD
memory card.
M
REVIEW
3
0001/0003
Transfer all files
from internal memory
to memory card?
DELETE FILE
THUMBNAIL
SLIDE SHOW
FILE TRANSFER
ROTATE
JPEG
1
2
No
Yes
RETURN
SELECT
OK SELECT
2004:03:30 13:30:41
Download from Www.Somanuals.com. All Manuals Search And Download.
35
REVIEWING YOUR FILES
1. In (
) Review Mode, press MENU to enter Review Menu.
or repeatedly to select and highlight File Transfer.
. The next screen will display the message “Transfer all files from internal memory to memory
2. Press
3. Press
card”?
4. Press
or
to highlight No or Yes.
5. Press OK to confirm selection.
•
•
If No is selected, no change will be made, and the LCD will return to the
previous screen.
If Yes is selected, the screen will display “Transferring ...” and all files will
be transferred to the SD card.
TRANSFERRING FILES...
Note:
1. Please insert a memory card that has 6 MB or more of available memory. If the SD card does not have
sufficient memory to store all the files from the internal memory, the camera will retain the remaining
images/video clips in the internal memory and will display the message “Memory Full” as well as the
memory card locked icon (
).
2. If the SD card is locked, the camera will show memory card locked icon (
resume to the Main Menu.
) for about 2 seconds and
3. If no SD card is inserted in the camera, the LCD shows “No card” for a few seconds, then return to
Review menu.
ROTATING THE IMAGES
Stored images can be rotated by 90 degrees clockwise (CW) or counter-clockwise (CCW); the newly-rotated
images can then be saved and replace the originally stored images.
REVIEW
DELETE FILE
Save
?
THUMBNAIL
SLIDE SHOW
FILE TRANSFER
ROTATE
1
2
No
Yes
RETURN
SELECT
SET
OK
1. In (
) Review Mode, press
or
repeatedly to select the desired image to be rotated.
2. Press MENU to enter Review Menu.
3. Press
4. Press
The rotate icon “
or
. The selected image will be shown in full size on the LCD display.
“ (to rotate clock wise) and “ “ (to rotate counter
clock wise) will also appear on the LCD.
5. Press or to repeatedly rotate the image 90 degrees clockwise or
to select and highlight “Rotate”.
Save...
counter-clockwise.
6. Press OK to confirm the selection. The LCD will ask “Save?”
7. Press
or
to highlight “Yes” or “No”, and then press OK to confirm.
•
If No is selected, no change will be made. The LCD will restore the
original image.
•
If Yes is selected, the image will be rotated and saved over the original file. The LCD will show “Saving …”
first, and then show the rotated image.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
CUSTOMIZING THE CAMERA SETTINGS
CUSTOMIZING THE CAMERA SETTINGS
T
SET AUTO OFF TIME
2
3
2 MIN
3 MIN
RETURN
OK SET
TV OPTION
NTSC
PAL
N
P
SETUP
T
SET AUTO OFF TIME
TV OPTION
RETURN
OK SET
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN
SELECT
SETUP
FORMAT
CAMERA MODE
SETUP
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN
SELECT
RETURN
SELECT
SETUP
RESTORE DEFAULT
AF ASSIST LIGHT
CAMERA INFO.
YES
NO
RETURN
SELECT
RETURN
OK SET
LCD BRIGHTNESS
–
+
SET
OK
FORMAT
Formatting will erase
all data.
Yes
No
Continue?
No
Yes
RETURN
OK SET
OK
SET
Download from Www.Somanuals.com. All Manuals Search And Download.
37
CUSTOMIZING THE CAMERA SETTINGS
DATE/TIME SETUP
01 - 01 - 2004
01 : 01 AM
MM - DD - YYYY
12- HOUR
RETURN
OK
SET
DIGITAL ZOOM
YES
NO
SETUP
T
SET AUTO OFF TIME
TV OPTION
RETURN
OK SET
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
BEEP
RETURN
SELECT
ON
OFF
SETUP
FORMAT
RETURN
OK SET
CAMERA MODE
SETUP
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
QUICK VIEW
OFF
RETURN
SELECT
1
3
5
1 SEC
3 SEC
5 SEC
RETURN
SELECT
SETUP
RETURN
OK SET
AF ASSIST LIGHT
CAMERA INFO.
AF ASSIST LIGHT
AUTO
OFF
RETURN
SELECT
RETURN
OK SET
CAMERA INFO.
MODEL:
FW VERSION:
FW PART NO.:
DATE:
CONFIG.:
RETURN
CAMERA INFO.
To use the Setup menu:
1. Turn the camera on.
2. Set the mode switch to (
LCD P/N:
SENSOR P/N:
) Camera Mode or (
) Review Mode.
3. Press the MENU button to display the main menu.
4. Press
or
repeatedly until Setup is highlighted.
RETURN
5. Press
to enter the Setup submenu.
6. In the Setup menu, press
customize.
or
repeatedly to highlight the option you wish to
7. Press
8. Use the arrow buttons to adjust the setting and press the OK button to select.
9. Press to return to the previous menu OR press the MENU button to exit.
to enter the submenu of the highlighted option.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
CUSTOMIZING THE CAMERA SETTINGS
SETUP MENU AND FEATURES
Setup Setting
Options
Description
Set Auto Off Time
2 min, 3 min
Enables the camera to automatically power off
when it is idle.
TV Broadcast
Standards
NTSC, PAL
Sets the mode that the camera needs to adapt to your TV.
(Page 59)
Language Option
English
Sets the language for display on your camera’s LCD. (Page 40)
Deutsch
Français
Español
Italiano
Nederlands
Português
Yes/No
Restore Default
LCD Brightness
Format
Restores all camera settings to the factory default. (Page 44)
Sets the LCD brightness level. (Page 40)
Yes/No
Formats the memory card, which will delete all files.(Page 41)
Date/Time Setup
Date/Time,
Date/Time format
Changes the date/time in your camera and their display
format.
Digital Zoom
Yes
No
Activates or deactivates the digital zoom.
Beep
On, Off
Activates or deactivates the beep.
Quick View
AF Assist Light
Camera Info
Off, 1 sec., 3 sec., 5 sec. Sets Quick View Time interval.
Auto, Off
Model
Displays the camera version information. This is for
FW Version
FW Part No.
Date
information purposes only.
Config.
LCD P/N
Sensor P/N
SETTING THE AUTO-OFF TIME
T
CAMERA MODE
SET AUTO OFF TIME
SETUP
T
SETUP
2
3
2 MIN
3 MIN
SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN
SELECT
RETURN
OK SET
RETURN
SELECT
1. In the Setup Menu, press
2. Press
3. Press
or
to enter the submenu.
or to highlight the preferred choice.
repeatedly until Set Auto Off Time is highlighted.
4. Press the OK button to set.
Notes: The default setting is 2 minutes. Press and hold the Power button for more than 1 second to
reactivate the camera after it automatically turns off.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
CUSTOMIZING THE CAMERA SETTINGS
SETTING THE LANGUAGE
SETUP
T
SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN
SELECT
To set the Language:
1. In the Setup menu, press
2. Press
3. Press
or
to enter the Language option submenu.
or repeatedly to highlight the desired language.
repeatedly until Language option is highlighted.
4. Press the OK button to set.
SETTING THE DATE AND TIME
SETUP
DATE/TIME SETUP
FORMAT
01 - 01 - 2004
01 : 01 AM
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
MM - DD - YYYY
12 - HOUR
QUICK VIEW
RETURN
SELECT
RETURN
OK
SET
1. In the Setup Menu, press
or
repeatedly until Date/Time Setup is highlighted.
2. Press
3. Press
4. Press
to enter the submemu.
to highlight the Date/Time fields and Date/Time format. The selected segment will blink.
or
repeatedly to change the number in the blinking position, press
to go to the new field.
5. After the Date/Time is set, press the OK button to quit Date/Time setting.
SETTING THE LCD BRIGHTNESS
CAMERA MODE
SETUP
SETUP
LCD BRIGHTNESS
T
SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
–
+
RETURN
SELECT
RETURN
SELECT
SET
OK
To set the LCD Brightness:
1. In the Setup Menu, press
or
repeatedly until LCD Brightness is highlighted.
2. Press
3. Press
to display the LCD Brightness bar on the LCD.
or to adjust the brightness.
4. Press the OK button to set.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
CUSTOMIZING THE CAMERA SETTINGS
FORMATTING THE INTERNAL MEMORY OR MEMORY CARD
CAUTION: !
1. Formatting will delete all pictures and video clips from the memory.
2. During the formatting process, NEVER REMOVE the memory card nor batteries, as it will
damage the card and/or the camera.
3. When a memory card is not inserted into the camera, selecting the formatting function
will format the internal memory instead. All pictures and video clips stored in the internal
memory will be deleted.
!
SETUP
FORMAT
FORMAT
Yes
No
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN
SELECT
RETURN
OK SET
1. In the Setup Menu, press
2. Press
3. Press
or
to enter the Format submenu.
or to highlight No or Yes.
until Format is highlighted.
4. Press the OK button to set.
•
•
If No is selected, no change will be made, and the LCD will return to the previous screen.
If Yes is selected, the LCD shows “Formatting will erase all data. Continue?” (This will delete all files!)
Formatting will erase
all data.
Continue?
Formatting …
No
Yes
OK
SET
5. Press
or
to highlight No or Yes.
6. Press the OK button to set.
•
•
If No is selected, no change will be made, and the LCD will return to the Setup Menu.
If Yes is selected, the LCD will display “Formatting …”, a process that deletes all files.
Note: If “Card Error” is displayed on the LCD screen, it indicates that the memory card is corrupted. Format
the memory immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
CUSTOMIZING THE CAMERA SETTINGS
TURNING THE BEEP ON OR OFF
The camera provides an option to enable or disable the beep. By default, the beep is turned ON. The camera
beeps in any of the following situations:
•
•
•
When the camera is powered on.
After an image is captured. (For this situation, the camera will beep, regardless of the beep setting.)
When any button is pressed, except the Power Button, the Mode Slide Button and the Zoom Buttons.
BEEP
SETUP
FORMAT
ON
OFF
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN
OK SET
RETURN
SELECT
To activate/deactivate the beep:
1. In the Setup Menu, press
2. Press
3. Press
or
to enter its submenu.
or to highlight the desired selection.
repeatedly until Beep is highlighted.
4. Press the OK button to set.
SETTING QUICK VIEW TIME INTERVAL
The camera provides programmable Quick View duration, which is the duration of time for an image to be
displayed immediately after a picture is taken.
Quick View
Off
Description
No quick view, LCD continues to show live view.
Displays the image for 1 second then resumes to live view.
Displays the image for 3 seconds then resumes to live view.
Displays the image for 5 seconds then resumes to live view.
1 sec (Default)
3 sec
5 sec
How to select Quick View time phrase:
QUICK VIEW
SETUP
Off
FORMAT
1
3
5
1 Sec
3 Sec
5 Sec
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN
RETURN
OK SET
SELECT
1. In the Setup menu, press
2. Press
3. Press
or
to enter its submenu.
or to highlight the desired selection.
until Quick View is highlighted.
4. Press the OK button to set.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
CUSTOMIZING THE CAMERA SETTINGS
SETTING AF ASSIST LIGHT
In low-lighting environment, the camera will turn on the built-in AF (Auto Focus) Assist Light to illuminate the
subject that is being focused on.
AF Assist Light
Auto (Default)
Off
Description
The camera will turn on AF assist light if it is needed.
The camera will not turn on the AF assist light even if the subject is in a low-light
condition.
How to change AF assist light setting:
SETUP
AF ASSIST LIGHT
AUTO
AF Assist Light
Camera Info.
OFF
RETURN
SELECT
RETURN
OK SET
1. In the Setup menu, press
2. Press
3. Press
or
to enter its submenu.
or to highlight the desired selection.
until AF Assist Light is highlighted.
4. Press the OK button to set.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
RESTORING FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1. In the Setup Menu, press or until Restore Default is highlighted.
2. Press or to highlight No or Yes, and then press OK to confirm.
•
•
If No is selected, no change is made. The LCD returns to the previous screen.
If Yes is selected, the LCD shows “Are you sure?”
3. Press
or
to highlight Yes or No, then press OK.
•
•
If No is selected, no change will be made. The LCD returns Setup page.
If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring....”
and then return to setup page. The Default settings will be restored.
The table below lists the default settings:
OPTION
DEFAULT STATUS
Camera Mode
Image Size
Quality
Single Shot
2048 x 1536
Normal
Flash
Auto Flash
White Balance
LCD Brightness
Scene Selection
Digital Zoom
Exposure Compensation
ISO
AWB
Center (0)
OFF
Yes
0
Auto
Metering
Matrix
Photo Effect
Time Out
None
2 Min
Slide show interval
Beep
2 Seconds
On
Quick View
AF Mode
1 Sec
Multi-Area
Continuous Repeat
AF Assist Light
TV Mode
Off
Auto
NTSC for USA/Japan, PAL for Europe/Asia
USA/Japan: MM/DD/YYYY, 12-hour
Europe/Asia: DD/MM/YYYY, 24-hour
Date/Time Format
Download from Www.Somanuals.com. All Manuals Search And Download.
44
SOFTWARE INSTALLATION GUIDE
SOFTWARE INSTALLATION GUIDE
The software that comes with your 3 Megapixel Digital Camera includes driver, reader, and photo editing
programs. These programs transfer the pictures or video clips from your camera to your computer, and enable
you to view them on your computer monitor. Refer to the following list of computer system requirements for
installation of the programs.
Computer System Requirements
Windows
•
•
300MHz Pentium II processor or equivalent.
Microsoft Windows 98/98SE, Windows Me, Windows 2000 Professional, Windows XP Home / Professional /
Media Center
•
•
•
•
•
360MB free hard disk space .
128MB of RAM
Minimum 800 x 600 display with 16-bit color (1024 x 768 with 24-bit color or better is recommended)
USB Port
4x CD-ROM Drive
Macintosh
•
•
•
•
•
Mac OS 9.0, 9.1, 9.2 and X 10.1 or later
Power PC-based
32MB of RAM
640 x 480 display with Thousands of colors (Millions of colors recommended)
Built-In USB Port
Installation Requirements
The installer will automatically detect which software applications need to be installed or if they are not
necessary. Please read the installation requirements before proceeding with the installation process.
System
Windows
98/98SE
Windows
Me
Windows
2000
Windows
XP
Macintosh
Install Camera Driver
Install DirectX 9
X
X
X
X
X
Install ArcSoft PhotoImpression
X
X
X
X
Install Adobe Acrobat
Reader 5
Camera automatically detected
by the computer (no driver
installation required)
X
X
Download from Www.Somanuals.com. All Manuals Search And Download.
45
SOFTWARE INSTALLATION GUIDE
USING THE INSTALLER SPLASH SCREEN
The installer will automatically detect which software applications need
to be installed or if they are not necessary. This will be indicated by
the buttons on the splash screen that appears when the CD-ROM is
inserted into the computer:
Color
Description
Yellow (
Gray (
)
Required or highly recommended to install.
Already installed or not necessary to install.
)
Option
Description
Camera Drivers
The USB Mass Storage camera drivers enable the camera to become
an external drive on your computer.
Microsoft DirectX 9
DirectX 9 enables the movie playback applications on your computer to
playback video clips that are captured with the camera.
ArcSoft PhotoImpression 2000
Adobe Acrobat Reader 5
This photo software enables you to edit and enhance pictures.
Adobe Acrobat Reader enables you to view the electronic version of the
User’s Guide.
User’s Guide
Direct link to our camera support website. Ensure that an internet
connection is established before clicking on the link.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
SOFTWARE INSTALLATION GUIDE
FLOW DIAGRAM FOR SOFTWARE INSTALLATION
To transfer the pictures and video clips from the memory, the camera must be connected to a computer with the
provided Mini-USB cable. Additional setup may be required by some operating systems before connecting the
camera to the computer for the first time.
Identifying your operating system
Windows
98/98SE
Windows 2000
Professional
Windows
Me/XP
Mac OS
9.x/10.x
Installing the USB
Mass Storage Drivers
and DirectX 9 p.49
Installing
DirectX 9 p.51
Installing ArcSoft PhotoImpression 2000 p.52
Installing Adobe Acrobat Reader 5 (if needed) p.54
Connecting the camera to the computer p.56
Downloading pictures and video clips onto the computer p.56
Disconnecting the camera from the computer p.58
Data transfer may not function correctly if you have one of the operating systems listed below or you are using
an add-on USB adapter or USB hub.
•
•
•
•
•
Windows 95
Windows NT 3.51/4.0
Mac OS 8.6 or lower.
Home-built computer systems or computer systems without a factory installed operating system.
Home-installed operating system or upgrade to the operating system.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
SOFTWARE INSTALLATION GUIDE
IDENTIFYING YOUR OPERATING SYSTEM
Windows
1. Right click the My Computer icon on your desktop, and go to Properties.
2. The System Properties Box will appear.(fig.1.1)
The information about your computer is listed under the system area.
3. Confirm that your computer is running one of the following operating systems and
proceed to the page in the chart for installation instructions:
System
Proceed to page
Windows 98, Windows 98
Second Edition
Page 49
Windows 2000
Page 51
Page 52
Windows Millennium Edition,
Windows XP Home Edition,
Windows XP Professional Edition,
Windows XP Media Center Edition
4. Press OK to close the window
For Windows 98/98SE/Me/2000, if the My Computer icon is not on your desktop, click Start > Settings >
Control Panel to display the Control Panel window (fig. 1.2). Double click on System icon to open the
System Properties Box (fig. 1.2).
For Windows XP, if the My Computer icon is not on your desktop, click Start > Control Panel >
Performance and Maintenance, then click on the System icon to open the System Properties Box (fig.1.1).
Macintosh
1. In the Apple Menu on the Menu bar, select About this Computer.
2. A window will appear with the computer’s operating system version. Confirm that your computer is version 9
or higher.
No installation of software is necessary for Macintosh users, please go to Page 56 for connecting your camera
to the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
SOFTWARE INSTALLATION GUIDE
INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98/98SE
Do not connect the camera to your computer BEFORE the camera drivers and Microsoft DirectX 9
installation is completed.
Step 1
Step 2
Step 3
Step 4
Make sure your camera is powered off and not connected to the computer.
Make sure the computer is powered on and Windows 98 or 98SE is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5
Step 6
Select the language. Click [OK].
The installation screen will appear. Click on Install
Camera Drivers.
Step 7
Click [Next >].
Step 8
The next dialog will prompt you to select the components
that will be installed. USB Mass Storage Driver and
DirectX 9 will be pre-selected.
The files will be saved in the Camera directory
automatically.
OR
You may change the default folder by clicking [Browse…]
and selecting a different folder in your computer.
Click [Next >].
Download from Www.Somanuals.com. All Manuals Search And Download.
49
SOFTWARE INSTALLATION GUIDE
Step 9
Click [Install].
Step 10
Install progress bar
Step 11
The next screen will begin the DirectX setup.
Select “ I accept the agreement “ then click [Next >].
Step 12
Click [Next >].
Step 13
Click [Finish].
Your computer will automatically restart.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
SOFTWARE INSTALLATION GUIDE
INSTALLING DIRECTX 9 – WINDOWS 2000
Step 1
Step 2
Step 3
Step 4
Make sure your camera is powered off and not connected to the computer.
Make sure the computer is powered on and Windows 2000 is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5
Step 6
Select the language. Click [OK].
The installation screen will appear, click on Install
Microsoft DirectX 9.0.
Step 7
Step 8
Step 9
The next screen will begin the DirectX setup.
Select “ I accept the agreement “ then click [Next >].
Click [Next >].
Click [Finish].
Your computer will automatically restart.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
SOFTWARE INSTALLATION GUIDE
INSTALLING ARCSOFT PHOTOIMPRESSION – ALL WINDOWS USERS
Step 1
Step 2
Step 3
Step 4
Make sure your camera is powered off and not connected to the computer.
Make sure the computer is powered on and Windows is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5
Step 6
Select the language. Click [OK].
The installation screen will appear, Click on Install
ArcSoft PhotoImpression 2000.
Step 7
Click [Next >].
Step 8
Click [Yes].
Download from Www.Somanuals.com. All Manuals Search And Download.
52
SOFTWARE INSTALLATION GUIDE
Step 9
Click [Next >].
Step 10
Step 11
Step 12
Make sure the two applications are checked and then
click [Next >].
Click [Next >].
The screen will show the status of the installation.
Step 13
Click [Finish].
Win98 will request for restart.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
SOFTWARE INSTALLATION GUIDE
INSTALLING ADOBE ACROBAT READER 5- ALL WINDOWS USERS (OPTIONAL)
Step 1
Step 2
Step 3
Step 4
Make sure your camera is powered off and not connected to the computer.
Make sure the computer is powered on and Windows is running.
Close any other applications or software you may be running.
Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5
Step 6
Select the language. Click [OK].
The installation screen will appear, Click on Install
Adobe Acrobat Reader 5.
Step 7
Step 8
Status bar
Click [Next >].
Download from Www.Somanuals.com. All Manuals Search And Download.
54
SOFTWARE INSTALLATION GUIDE
Step 9
The files will be saved into C:\Program Files\Adobe\
Acrobat 5 automatically.
OR
You may change the default folder by clicking [Browse…]
and selecting a different folder in your computer.
Click [Next >].
Step 10
Step 11
Installation progress
Select Yes, to restart the computer or No, to restart the
computer later.
Click [Finish >].
Download from Www.Somanuals.com. All Manuals Search And Download.
55
CONNECTING THE CAMERA TO THE COMPUTER
CONNECTING THE CAMERA TO THE COMPUTER
Windows 98/98SE users - Do not connect the camera to your computer BEFORE the camera
drivers and Microsoft DirectX 9 installation is completed.
1. Power the camera on.
2. Connect the camera to the computer with the Mini-USB cable provided.
•
Plug the larger end of the Mini-USB cable that is included with the camera into
your PC’s USB port. (Please refer to your computer’s documentation for more
information on the location of the USB port.)
•
Plug the small end of the Mini-USB cable into the USB port located in the Cable
Connection panel on the side of the camera.
3. When the camera is connected to the computer for the first time, the camera
USB Mass Storage driver installation will begin. Please follow the on-screen instructions to complete the
installation.
DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER
Note: Windows 98/98SE users must install the Camera Driver and DirectX 9 first. (Page 49)
Note: Windows 2000 users must install DirectX 9 to view video clips on the computer. (Page 51)
Downloading files from the camera:
•
Insert the memory card.
Caution: Do not attempt to open the battery/memory door to insert or remove the memory and/or batteries
when the camera is connected to the computer.
FOR WINDOWS USERS
Downloading Pictures and Video Clips onto your computer:
1. Connect the camera to the computer.
2. Double-click on My Computer.
3. Double-click Removable Disk.
4. Double-click DCIM.
5. Double-click the folder that contains the desired images to view.
•
The pictures (JPEG) and video clips (AVI) stored in the memory will be displayed.
6. Click and drag the files into a directory in your computer to save them.
To select all files, click Edit > Select all.
•
FOR MACINTOSH USERS
1. Connect the camera to the computer.
•
After a few moments, the external hard drive will appear on the desktop.
2. Double-click the “JD C 3.1z3” removable drive that is on your desktop.
3. Double-click DCIM.
4. Double-click the folder that contains the desired images to view.
•
The stored pictures (JPEG) and video clips (AVI) stored in the memory will be displayed.
5. Drag and drop the image you want to save in the computer.
To select all files, click Edit > Select all.
•
Note: You may also transfer the stored pictures and video clips onto your computer by using a memory
card reader (sold separately.)
Download from Www.Somanuals.com. All Manuals Search And Download.
56
CONNECTING THE CAMERA TO THE COMPUTER
USING ARCSOFT PHOTOIMPRESSION (WINDOWS ONLY)
1. Connect the camera to the computer.
2. Launch ArcSoft PhotoImpression software by clicking on Start-Programs-ArcSoft Camera Suite and choosing
PhotoImpression from the application list on your screen. (fig. 1.1)
fig. 1.1
fig. 1.2
3. When the Application opens, click on the Camera/Scanner button.(fig. 1.2)
4. Click on the drop-down list under Select Source and choose JD C 3.1z3 Camera.
5. Click on the Camera/ Scanner Icon (
A second window will appear showing the contents (pictures) in the memory, and options on how to
handle them. (fig. 1.3)
).
•
fig. 1.3
6. Select the desired picture to view, edit or save by clicking on it. The selected image will be highlighted by a
border. To choose all pictures, click on Select All.
7. Click on Get Photos.
The pictures will then be added to your album at the bottom of the application (fig. 1.4).
fig. 1.4
8. Click on Close to close the Camera Controls windows (as shown in
fig. 1.3).
9. Double-click on the thumbnail or click on OK to open the photo.
10.Click on Edit to edit the photo. You may, for example,
•
•
•
Resize the photo by using the “Crop/Resize” tools.
Modify the photo by using the “Retouch” tools. For example, to remove red-eyes.
Add some text onto the photo by using the “Text” tools.
11. Click on Save to save the photo. Two options are available: “Save” and “Save As”.
12.Click on Print to print the photo. The options available include: Standard Printing, Greeting Card/Multiple
Printing or Thumbnail Printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
CONNECTING THE CAMERA TO THE COMPUTER
UNPLUGGING YOUR CAMERA FROM THE COMPUTER
Windows ME/2000/XP:
1. Click once on the “Unplug or Eject Hardware” icon on the right hand side of your task bar.
(fig.1.1)
fig.1.1
2. Select “Stop JD C 3.1z3 Camera USB Mass Storage Device”
3. Click [OK] in the “Safe to Remove Hardware” prompt.
4. Unplug the Mini-USB from the camera. (fig.1.2)
Macintosh:
1. Drag the “JD C 3.1z3 ” removable drive icon on the desktop to the Trash. Or click
on “JD C 3.1z3 ”, then click “Eject” under “File” or “Special” (if the mouse is not
available).
2. Unplug the Mini-USB cable from the camera.
fig.1.2
Download from Www.Somanuals.com. All Manuals Search And Download.
58
TV MODE
TV MODE
CHANGING THE TV MODE SETTING
The camera allows you to view individual files and to take pictures or record clips on the television. To begin,
check your television documentation to determine the suitable type of TV broadcast standard (TV OPTION):
NTSC or PAL.
SETUP
TV OPTION
NTSC
T
SET AUTO OFF TIME
TV OPTION
N
P
PAL
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN
OK SET
RETURN
SELECT
1. Slide the Mode switch to (
) Camera Mode
2. Press the MENU button.
3. Press
4. Press
5. In the Setup menu press
6. Press
7. Press
or
to enter the Setup menu.
or
to enter the TV submenu.
or to change the setting to NTSC or PAL and press OK.
repeatedly until Setup is highlighted.
until TV option is highlighted
8. Press the MENU button to exit.
CONNECTING THE CAMERA TO THE TELEVISION
1. Connect the red sound terminal of the AV cable to the sound terminal marked AUDIO of your TV, and
connect the yellow image terminal of the AV cable to the image input terminal jack marked VIDEO or VIDEO
IN on your television.
2. Turn on your television.
3. Set the television to video mode according to the
instructions in the owner’s manual. (This is usually channel
3, 4 or AV).
4. Connect the other end of the cable into the VIDEO port
located in the cable connection panel.
USING THE TV AS A LIVE VIEWFINDER
1. Connect the camera to the TV.
2. Turn the camera on.
3. Slide the Mode Switch to (
) Camera Mode.
4. The TV will become a Live Viewfinder.
Note: You may record your TV Mode session by using your VCR. Please refer to your VCR documentation
to learn more about recording.
REVIEWING PICTURES AND VIDEO CLIPS ON YOUR TV
1. Connect the camera to the TV.
2. Turn the camera on.
3. Slide the Mode Switch to (
4. Press or to scroll through the saved pictures and video clips.
When an AVI file is displayed on the TV, press the OK button to view the video clip.
) Review mode.
•
5. To view more options, press the MENU button to display the menu on the TV screen. Please refer to
page 32/37 for further information.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
ERROR MESSAGES
ERROR MESSAGES
Error Messages appear on the LCD when the memory is full or when there is a problem with the SD card.
Error Message
Cause
Solution
Follow one of the below methods:
1) Delete unwanted files.
2) Insert an SD card or replace
the SD card with another that has
free memory space.
Memory (either internal memory
or SD card) is full.
Memory Full
3) Transfer the photos/video clips
onto your computer.
Follow one of the below methods:
1) Delete unwanted files.
2) Insert an SD card, or replace
the SD card with a new one.
3) Transfer the photos/video clips
onto your computer.
Memory Full
The SD card memory isn’t enough
to hold the files saved in the
internal memory. Only part of the
files in the internal memory is
transferred.
Memory Error
Format the internal memory (P.41)
first. If the problem remains after
formatting, that means the internal
memory is corrupted. You can
either use an SD card as storage
The camera’s internal memory
may be corrupted.
or send the camera for repairing.
Format the SD card first. If
the problem still exists after
formatting, replace the corrupted
SD card with a new one.
Card Error
The SD card may be corrupted.
Format the SD card.
The memory card is not
recognizable (maybe the card
is new or used on other digital
cameras).
Imcompatible Media
Formating will erase
All data Continue?
Turn off the camera, take out the
SD card and unlock the SD card.
The memory card is locked.
No Card
Insert an SD card with enough
free memory.
Attempts to transfer files when an
SD card is not inserted into the
camera.
Format Error
The internal memory or the SD
card is corrupted.
For an internal memory problem,
use an SD card as storage
instead. For an SD card problem,
replace the SD card with a new
one.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
TROUBLESHOOTING
TROUBLESHOOTING
SYMPTOM
CAMERA
POSSIBLE CAUSE
POSSIBLE SOLUTION
Cannot turn on the camera.
Batteries are not installed
correctly.
Install batteries correctly by
following the indication engraved
on the edge of the battery
compartment or that on the
battery contact.
Batteries are flat or weak.
Replace batteries.
Battery door is not closed
properly.
Close the battery compartment
door properly.
To prevent accidentally powering
on the camera, it is designed to
power on with a set delay.
Press and hold the power button
for more than 1 second to power
on the camera.
In cold weather, battery power
level might temporarily fall,
thereby affecting camera
performance.
Try different ways to warm the
batteries, for instance: place them
in your pocket or warm them with
your hands, before re-trying
operation.
The camera needs to be reset.
Press the reset button on the
back of the camera with a pointed
object, such as a pen, then power
the camera off then on.
The camera buttons do not work.
Replace the batteries with new
ones.
The batteries are drained of
power.
The camera turns off during
usage.
Camera automatically powers
off and retracts the lens after
2 minutes (default setting) of
inactivity.
Press any button to power the
camera on again.In the Setup
menu, set the Auto-OFF Time to
3 minutes (for detail instructions,
see page 39).
The Camera is designed to have
the Auto-Focus setting.
The camera cannot turn off the
Auto-Focus setting.
This can occur when the camera
is repeatedly powered on/off in
quick successions.
LCD displays white screen when
powered on.
Wait for a few seconds between
powering on or off the camera.
PICTURES/VIDEO CLIPS
Poor Lighting.
Picture/Vide clip has poor
image quality.
Increase the lighting in the
surrounding area when taking
pictures and video clips.
Lens is dirty.
Clean the lens with a soft cloth.
Refer to the Safety Tips and
Maintenance section (p. 71).
Subject is too close.
Stand at least 2 ft. (0.6m) away
from the subject in the Normal
Mode. In Macro Mode, keep the
camera and the subject within
the range of 5.9 inch (15cm) to
2ft (60cm).
Download from Www.Somanuals.com. All Manuals Search And Download.
61
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The images are dark on the
computer and when printing, but
all images look fine in Review
Mode.
Configuration and settings of
computer and printer need to be
adjusted.
The display setting of the
computer can be adjusted via the
Control Panel’s Display section
or the actual display settings of
the monitor.
The printer’s setting can be
adjusted via the Control Panel’s
Printers.
Refer to the user’s documentation
that comes with the computer
and printer.
TAKING PICTURES
Move the subject further away
from the camera.
Subject is too close.
Flash picture taken is too light.
Change the camera setting to
Auto Flash. See p. 12.
The flash is not needed.
Lighting condition is too bright.
Decrease exposure
compensation. See p.22.
Move the subject closer to the
camera, or move the camera
closer to the subject.
The subject is too far away for the
flash to be effective.
Flash Picture taken is too dark.
Select “Auto Flash” or “Flash On”
setting.
Flash is not on.
Change the subject’s position
if possible or move to another
location to take the picture of the
subject from another angle.
The subject is in front of a bright
light.
Increase the exposure
Lighting condition is too dark.
compensation. See p. 22.
This is normal, as your camera’s
electronic light sensor is
programmed to only fire the flash
when needed.
There was sufficient lighting for
the picture, so the flash did not
fire. This happens when the
camera is set to Auto Flash.
Flash did not work.
Camera’s flash has been turned
off.
Select “Auto Flash” or “Flash On”
setting.
Flash did not charge.
Ensure that the Ready LED has
stopped blinking before taking a
picture.
Selected the Continuous or Sport
mode.
When the Continuous or Sport
mode is selected, the flash is
disabled.
To save power, turn off the LCD.
When the camera is not in used,
power it off. Economize on
the use of the Auto-Focus and
zooming functions
Depends on the level of usage.
Auto-Focusing, zooming in and
out are some of the functions that
tend to draw more power.
My fresh set of batteries took
only a few pictures and they are
now flat.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
My fresh set of batteries took
only a few pictures and they are
now flat.
Are the fresh batteries newly
purchased?
So-called fresh batteries that have
been purchased a long time ago
cannot be considered fresh; as
battery power tends to drop over an
extended period of time.
Every once in a while battery
contacts need to be cleaned. Refer
to the Safety Tips and Maintenance
section (p. 71).
Are the battery contacts dirty?
Subject or camera moved as the
picture was taken.
1. Hold camera steady until the
picture is taken.
Picture taken is blurry.
2. Select the Sport capture mode
for fast-action-oriented subjects.
The focus was not locked
beforetaking the picture.
Before taking a picture, press the
Shutter Button halfway to lock the
focus (the green LED besides the
optical viewfinder will remain ON
and the Focus Mark at the center
of display will be green), then press
the Shutter Button fully to capture
the picture. (p.11)
Use the Marco mode only for
shooting distances between 2.9ft
(15cm) ~ 2ft (60cm). Otherwise, use
the normal capture mode.
Check that the Marco mode is not
selected.
Clean the lens with professional
lens cleansing paper or use a piece
of lint-free, soft-dust-free cloth to
gently wipe the lens.
The lens is dirty.
Make sure the subject is centered
in the focus mark when composing
the image.
The subject is not located at the
center of the focus mark when
composing the image.
Reset the white balance setting to
Auto, or for the specific lighting in
the surrounding area.
White balance is not set properly.
There is something wrong with
the color of the photographs.
Aim the camera at something white
such as a white piece of paper,
press the Shutter button half-way
to adjust the white balance to the
subject’s lighting condition.
The white balance is not correctly
adjusted.
Insert a memory card with sufficient
memory available.
Cannot take a picture or record a
video clip.
Memory is full.
Download the stored files to your
PC and delete the files from the
memory card.
Delete unwanted pictures and
continue shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Camera is not set in picture/video
clip taking mode.
Set the camera to the proper
mode for recording video clips, or
taking photographs.
Power is off.
Turn the power on.
Turn the power on.
Replace the batteries.
Camera is in Auto Power off Mode.
The remaining battery power is low.
Camera is connected to a computer.
Disconnect the camera from the
computer before taking pictures.
Remove the SD card from the
card slot and slide the lock switch
to off.
The SD card is locked or write-
protected.
Cannot take a picture or record a
video clip when using an SD
memory card.
Format the inserted SD card
before using it to take pictures.
The SD card cannot be recognized.
Viewfinder is dirty.
Picture is blurred when looking
through the viewfinder.
Clean the Viewfinder with a soft
cloth or cotton swab. See the
Camera maintenance section.
Part of the picture/ video clip is
missing.
Keep hands, fingers, etc. away
from the lens when taking a picture.
Something was blocking the lens
when taking the picture.
Leave space around the subject
when centering the picture in the
viewfinder.
The picture was not centered
correctly in the viewfinder.
Replace batteries
The battery level is low and the
camera does not have sufficient
power to complete picture capture.
Camera is not responding
during picture capture.
The camera needs to be reset.
Press the reset button at the back
of the camera with a pointed object,
such as a pen, then power the
camera off then on.
Turn the camera on.
The camera is not turned on.
The Shutter button does not
work.
Wait until the light stops blinking
before attempting to take another
picture.
The camera is processing a picture;
the ready LED light is still blinking.
Picture taken did not save in
memory.
If the low-battery indicator
appears on display, replace
batteries with a fresh set.
The camera powered off before
completing the save operation.
DO NOT open the battery/
memory card compartment door
when the camera is powered on,
as it could corrupt the memory
card.
The memory card was removed
before completing the save
operation.
Ensure that the battery/memory
card compartment door is
properly and securely closed
before taking pictures.
Battery door was opened before
completing the save operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
GETTING HELP
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
LCD
Make sure the protective plastic film
covering the LCD (for protection
purposes during shipment) has
been removed.
Protective plastic film is still in
place on the camera.
The LCD display is dark.
Increase the brightness level on
your LCD to meet your personal
needs. See p.40 for setting the
brightness.
The LCD brightness level is set
too low or the surrounding lighting
condition is poor.
The set LCD brightness level is
too low.
Adjust the brightness in the Setup
mode, see page 40.
The LCD is dim or visibility is
poor.
When using the camera in sunny
conditions, the visibility of the LCD
may seem dim.
Shade the display for better
visibility. .
Protective plastic film is still in
place on the camera.
Make sure the protective plastic film
covering the LCD (for protection
purposes during shipment) has
been removed.
The LCD screen looks milky
and or scratched.
LCD is turned off.
The LCD is not displaying
anything.
Turn the LCD on, by pressing (
Replace the batteries.
).
The battery level is low.
The camera is in the picture
capturing mode.
LCD does not display stored images.
Set the camera to review mode.
The LCD turns off when the camera
is connected to a television.
The camera is connected to a
television.
VIEWING VIDEO CLIPS ON THE COMPUTER (WINDOWS 98/98SE/2000)
Install Microsoft DirectX 9. (p.49)
Video playback files are missing.
Cannot playback stored video
clips on the computer.
INSTALLING SOFTWARE AND DRIVERS
Reset the camera by pressing
the reset button with a pointed
object such as a pen. Reboot the
computer.
The operating system may not be
allocating adequate resources to
download the pictures.
Camera is not responding
during picture download to the
computer.
Check that the Mini-USB cable is
plugged into the camera.
The Mini-USB cable is not
plugged into the camera.
Check that the USB cable is
plugged into the computer.
The Mini-USB cable is not
plugged into the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
GETTING HELP
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Camera is not responding
during picture download to the
computer.
The USB port of computer is
damaged.
Replace or repair the USB port.
The USB cable is damaged.
Replace the USB cable.
Computer cannot detect the newly Update the driver in My Computer
installed driver
> Properties > Hardware > Device
Manager.
The driver did not install
successfully.
Uninstall and re-install the driver.
The computer is not powered on. Turn your computer on.
Cannot transfer pictures to the
computer. The New Hardware
Wizard cannot locate drivers.
(Windows 98/98SE)
Disconnect the Mini-USB cable
from the camera and the computer.
Install the camera software and
drivers. (p.49)
The Software is not installed on
the computer.
Disconnect the Mini-USB cable
from the camera and the computer.
Uninstall the
Software is not fully or correctly
installed on the computer.
software: click Start >Setting >
Control Panel > Add/ Remove
Programs. Re-install the camera
drivers. (See p.49)
SD CARDS
The camera does not
Purchase a certified SD card.
The card may not be SD certified.
recognize your SD Card.
Caution: Formatting erases all data
on the card. P.41
The card may be corrupted.
Reformat the card.
Insert a card into the card slot.
See p.8
No card is inserted in the camera.
The card is locked.
Take out the card and unlock.
RECHARGEABLE BATTERIES
A low battery warning appears
during initial use of the freshly
charged batteries.
Recharge the batteries to maximum
capacity (confirm the needed
duration of re-charge time
The batteries might not have been
charged properly.
Fully charge/discharge the batteries
via normal operation for three to
four cycles
The batteries haven’t reached
their maximum capacity.
Camera is not responding
during picture download to the
computer.
Clean the battery contacts and
battery polarities with alcohol and a
soft, dust-free, lint-free, clean cloth.
The battery contact is dirty.
Avoid these kinds of unnecessary
operations.
Excessive zooming and powering
on/off operations
Download from Www.Somanuals.com. All Manuals Search And Download.
66
GETTING HELP
GETTING HELP
contacting a customer support representative.
Before You E-mail or Call us:
If you have questions concerning the operation of the camera or software installation, you can speak to or e-
mail a customer service representative. Please have the following information available:
Camera Information:
Name of camera model
Camera Serial Number
Computer Information:
Operating System Processor Speed (MHz)
Computer Maker and Model
Exact Error message received Date
Download from Www.Somanuals.com. All Manuals Search And Download.
67
CAMERA SPECIFICATIONS
CAMERA SPECIFICATIONS
Lens
7.23 - 21.7mm (equivalent to 38-114 mm in 35mm format),
f/2.8 - f/4.7, 6 groups 6 elements all glass.
Aperture
2 steps: f/2.8 and f/5.6 at wide zoom position
Shutter
Electronic, 4s – 1/1000s
Optical Zoom
Digital Zoom
Focus Range
3x in 6 steps
3x
Auto Focus from 60cm to infinity (23.6 in. to infinity), macro from 15 cm to 60 cm
(5.9 in. to 23.6 in.)
Focusing System
Image Sensor Type
Sensor Effective Pixels
Image Aspect Ratio
Image Size
5 area Multi-area AF, Center Spot AF
1/2” CMOS
3.1 Megapixels
4:3
2048 x 1536, 1600 x 1200, 1024 x 768, 640 x 480
Fine (4.5:1), Normal (11:1), Economy (17:1)
Auto, 100, 200, 400 (user selectable)
Single Shot, Sport, Continuous Shot, Sport + Continuous Shot
Auto
Image Quality
Sensitivity (ISO setting)
Capture Mode
Exposure
Auto Exposure metering
White Balance
Spot, Matrix
Auto, Sunny, Fluorescent, Tungsten
Scene Selection
Off, Party/Indoor, Beach, Snow, Night Landscape, Sunset, Fireworks, Night
portrait.
Picture Effect
Off, B&W, Sepia
Exposure Compensation +/-0, 0.3, 0.7, 1.0, 1.3, 1.7, 2.0 EV
Continuous Shoot
Video Clips
7 frames in 2.3sec with 640x480 resolution
AVI format,
•
320x240 or 160x120 resolution with 20 fps, approx 25sec with 8 MB storage.
Self-Timer
10s delay with blinking red LED (7s slow blinking and 3s fast blinking), available
for camera and video clip.
Storage Type
Internal Memory and SD card
Internal Storage
6 MB Internal Non-Volatile Memory
Download from Www.Somanuals.com. All Manuals Search And Download.
68
CAMERA SPECIFICATIONS
Images Stored on 6MB memory (approx.):
Storage Capacity
Image Quality
Image Size
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine (4.5:1)
4
8
6
14
32
55
36
79
Normal (11:1)
Economy (17:1)
13
23
15
130
Images Stored on 16MB memory (approx.):
Image Quality
Image Size
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine (4.5:1)
9
14
31
53
33
74
82
Normal (11:1)
Economy (17:1)
19
34
181
297
125
Images Stored on 32MB memory (approx.):
Image Quality
Image Size
3MP
(2048 x 1536)
20
2MP
(1600 x 1200)
29
1.3MP
(1024 x 768)
68
VGA
(640 x 480)
171
Fine (4.5:1)
Normal
41
71
65
154
261
376
616
Economy
111
Images Stored on 64MB memory (approx.):
Image Quality
Image Size
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine (4.5:1)
Normal
42
84
60
140
316
536
351
771
135
229
Economy
146
1270
Images Stored on 128MB memory (approx.):
Image Quality
Image Size
3MP
2MP
1.3MP
VGA
(2048 x 1536)
(1600 x 1200)
(1024 x 768)
(640 x 480)
Fine (4.5:1)
Normal
83
119
268
455
279
628
698
1532
2512
167
290
Economy
1064
Output file format
Optical Viewfinder
JPEG compression with EXIF 2.2
Real image zoom finder with 70-90% coverage
LCD
1.5” TFT LCD, 280(H) x 220(V), 61,600 Pixels
Download from Www.Somanuals.com. All Manuals Search And Download.
69
CAMERA SPECIFICATIONS
Playback Zoom
2x, 4x (for 2048 x 1536, 1600x1200, 1280x960);
2x (for 640x480)
Flash Mode
Flash Range
Auto, Auto + RER, Flash ON and Flash off.
0.6 to 2.6m (1.97 to 8.53ft) in Wide; 0.6 to 1.7m(1.97 to 5.58ft) in Tele@ISO100
0.6 to 3.5m (1.97 to 11.48ft) in Wide; 0.6 to 2.1m(1.97 to 6.89ft) in Tele@ISO200
User Interface
All information and menus are displayed on TFT LCD display, Review Image,
shows frame counter, flash status, self timer, focus mode, image quality, image
size, battery status and memory card.
Multi Language Support
User selectable UI on TFT OSD menu. The languages included are Spanish,
Italian, German, English, French, Dutch, Simplified Chinese, Japanese
and Portuguese.
Mode Selection
Slide Show
Slide Switch for Camera, Review, Video
Yes
Yes
AF Assist Light
Speaker
Yes
Tripod Socket
Connectivity
System Connectivity
Standard 1/4” size
Mini USB and TV/VCR Out
Mass Storage Driver for Window 98, 98SE,2000,ME, XP
Mass Storage Driver for Mac OS 9.x and Mac OS OS X
Time Out
1 minute for LCD.
2 minutes or 3 minutes programmable auto power off for camera.
Power Source
2x AA batteries, can use alkaline, lithium and rechargeable NiMH type
(Rechargeable NiMH type Highly Recommended)
Dimensions
Weight
100 x 61 x 31.5 mm without protrusions
160g without batteries and memory card
See the separate “Packing Content” sheet.
Accessories
Download from Www.Somanuals.com. All Manuals Search And Download.
70
SAFETY TIPS AND MAINTENANCE
SAFETY TIPS AND MAINTENANCE
Cleaning the camera body:
1. Please use a soft, dry and dust-free cloth to clean the camera.
Cleaning the lens, viewfinder and LCD:
1. Blow off dirt or dust with a blower or canned air.
2. Gently wipe the lens, viewfinder and/or LCD with a micro-fiber cloth.
3. To remove dirt or residue, moisten the cloth with lens cleaning fluid and gently wipe the lens, viewfinder
and/or LCD.
CAUTION: Do not apply the fluid directly onto the lens, viewfinder or LCD.
Cleaning the battery contacts:
As a matter of routine operation and handling, should any debris or foreign contaminant deposit itself on the
battery contacts in the camera and/or on the batteries, follow steps below to clean the battery contacts to ensure
proper electrical operation:
1. Wet the tip of a cotton bud/swab with rubbing alcohol and squeeze (with clean fingers) the excess alcohol
from the bud/swab.
2. Wipe the battery contacts inside the camera battery compartment and both ends of the batteries lightly with
the damp bud.
3. Allow the contacts to dry before placing batteries in the camera.
Caution:
1) Do not press hard during cleaning, as this will damage the battery contacts.
2) Do not use water to clean the contacts, as this will increase the chance of oxidation.
3) Do not use Acetone or Nail Polish remover to clean the contacts as this may adversely affect camera
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
SAFETY TIPS AND MAINTENANCE
SAFETY TIPS
Precautions for the camera:
•
Do not attempt to modify this camera in any way. This may cause a fire, electric shock or severe damage to
the camera.
•
•
•
Do not use the flash in close proximity to people or animals.
When taking photographs, never point the lens of the camera directly into very strong light.
Please do not use this product in close proximity to flammable or explosive gases as this could increase the
risk of explosion.
•
For safety reasons keep this product and accessories out of reach of children or animals to prevent
accidents.
•
•
Do not swallow batteries or small camera accessories.
Keep the camera away from water and other liquids, and never let it get wet. Do not use the camera outdoors
outdoors amid rain, snow or hail.
•
•
Should any form of liquid enter the camera, do not use it. Switch the camera off, and then remove the
batteries. Do not continue to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through access points e.g. card
slot and battery chamber. This may cause a fire or electric shock.
•
•
Do not operate this camera with wet hands. This could pose a risk of electric shock.
Under the environment with electrostatic discharge, the camera may malfunction and require the user to
reset the camera.
•
Under the environment with electrical fast transients (EFT), the camera may lose function and require user
to reset the camera.
•
•
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Please avoid using the camera in high or low temperature. Operation temperature range 32˚F - 104˚F (0˚C
- 40˚C).
•
•
It is normal that the temperature of the camera body rises after being in use for a long period.
Do not leave this camera in places subject to extremely high temperatures, such as in a sealed vehicle,
under direct sunlight, or in other places with extreme variances in temperature. Exposure to extreme
temperatures
may adversely affect the camera’s internal components and could cause a fire.
Always use the camera and its accessories in a well-ventilated area.
Allowing dust to accumulate in the camera over a long period of time is hazardous and in extreme
circumstances may cause a fire. It is best to clean your camera prior to seasonal periods of high humidity.
•
•
Precautions for batteries:
•
•
•
•
•
•
•
Use 2x AA batteries only.
Dispose of the batteries in a manner that complies with applicable laws.
Leakage, overheating, or burst batteries could result in fire or injury.
Do not short circuit, heat or dispose of batteries in fire.
Do not use old batteries with new ones, or mix brands of batteries.
Ensure the batteries are positioned correctly with regard to polarity (+/-).
Batteries may lose power if kept inside the camera for a long time without using. Please remove the
batteries while the camera is not in use.
•
Do not use manganese batteries as they cannot supply sufficient power to support the camera’s operations.
Batteries may not work normally under 32˚F (0˚C).
Precautions for SD Memory Cards:
•
In the event of malfunction or damage, it is possible that data may be lost. Concord Camera is not
responsible in any way for such data loss.
•
•
•
•
•
•
Do not touch the terminals with hands or metal objects.
Keep dust, liquid and direct sunlight when in used or when placed in storage
Avoid heat, liquid and direct sunlight when using and when storing.
Do not open the battery/card cover or remove the SD Memory Card while data is being read or written.
Do not dismantle or modify.
The recorded data may be lost if the card is affected by strong static electricity, electrical shock, during card
Download from Www.Somanuals.com. All Manuals Search And Download.
72
SAFETY TIPS AND MAINTENANCE
repair or malfunction.
•
When using SD Memory Cards do not change the attributes (read-only, etc.) of the files (pictures (JPEG) or
video clips (AVI) on the card. Doing so may prevent the camera from working properly when deleting, etc.
Do not change the file names or the directory name of the pictures or video clips using a computer or save
files other than pictures or video clips taken by this camera onto the SD memory card. Pictures or video
clips that have been edited or added to the SD memory card with the computer may not play back and it
may cause the camera to malfunction.
•
•
The SD Memory Card includes a write-protect switch. Sliding this switch downward prevents data from
being written to the card and pictures and video clips saved on the card are protected.
Please note that pictures and video clips cannot be taken or deleted when the write-protect switch is on.
When using a large-capacity card, writing, reading and deleting may take some time.
Do not store the card in places with high humidity, dusty places or where static electricity or electromagnetic
fields are likely to occur.
•
•
•
Images stored in the memory card may be ruined or damaged if you turn off the camera while it is in
process of reading, writing or formatting etc.
•
•
SD cards are delicate electronic devices. Please do not bend or drop them
Please do not place the SD card in or near to an environment of strong electronic or magnetic fields such as
loud speakers or TV receivers.
•
•
•
•
Please keep the SD card in its bag or case when not in use.
It’s normal for the SD card to be warm after use.
Please make sure you switch off the camera before you remove the SD card.
Do not open the battery/memory card door or remove the SD Memory Card while the camera is reading,
writing or formatting the card.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
REGULATORY INFORMATION
REGULATORY INFORMATION
FCC INFORMATION
FCC WARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15 of FCC rules.
Only the cable supplied with the camera should be used. Operation with other cables is likely to result in
interference to radio and TV reception and could void the user°Øs authorization to operate this equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired
operation.
Tested to comply
with FCC standards
for HOME OR OFFICE USE
Changes or modifications not expressly approved by the manufacturer may void the user°Øs authority to operate
this equipment.
USER INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
VCCI INFORMATION
This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the
Voluntary Control Council for Interference (VCCI) from Information Technology Equipment. If this is used near
a radio or television receiver in a domestic environment, it may cause radio interference. Please install and use
the equipment according to this instruction manual.
- This product is in conformity with Directive 89/336/EEC.
The Jenoptik trademark is used by Concord Camera Corp. and its subsidiaries under license.
This product contains the software product of FUJIFILM “Exif Toolkit For Windows Ver.2.5 (Copyright (C) 1998-2004
FUJI PHOTO FILM CO.,LTD.). Exif is the image file format standard for digital still cameras stipulated by JEITA (Japan
Electronics and Information Technology Industries Association).
Download from Www.Somanuals.com. All Manuals Search And Download.
74
|