Compaq Personal Computer D510 e pc User Manual

b
Quick User’s Guide  
Compaq Evo D510 e-pc  
Document Part Number: 303399-001  
5970-5295-EN  
August 2002  
This book will help you with the initial hardware and software setup  
for the Compaq Evo D510 e-pc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1 Quick Setup  
Connecting Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2  
Connecting the Power Cords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3  
Using Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3  
Starting Your PC for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3  
Customizing the Monitor Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4  
Protecting Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4  
Compaq Restore Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4  
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4  
Turning Off the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5  
Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5  
For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5  
2 Troubleshooting  
Basic Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Helpful Hints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1  
Solving Minor Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2  
Solving Hardware Installation Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–7  
A Replacing the Battery  
B Specifications  
C Safety & Regulatory Notices  
Regulatory Compliance Identification Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1  
Federal Communications Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1  
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Quick User’s Guide  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Mouse Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Declaration of Conformity for Products  
Marked with the FCC Logo (United States only). . . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
Avis Canadien. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
European Union Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
Energy Star Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5  
German Ergonomics Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–6  
Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–6  
CDRH Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–6  
Compliance with International Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–6  
Laser Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–7  
Laser Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–7  
Battery Replacement Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–8  
Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–9  
iv  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Quick Setup  
WARNING: Misuse of your personal computer or failure to establish a  
safe and comfortable workstation may result in discomfort or serious  
injury. Refer to your Safety & Comfort Guide for more information on  
choosing a workspace and creating a safe and comfortable work  
environment.  
Å
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. For more  
information, refer to Appendix C, “Safety & Regulatory Notices.” To  
reduce the risk of electrical shock, connect your personal computer only to  
a grounded (earthed) electrical outlet that is easily accessible at all times.  
Quick User’s Guide  
1–1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting Devices  
Connect the monitor, mouse, and keyboard cables to the personal  
computer. If you use a network, connect the network cable to the  
Ethernet RJ-45 Connector. Connectors are color-coded for easy setup.  
The connectors are shaped to go in one way only. Typical connectors  
are shown below:  
LAN  
4 x USB 2.0  
USB serial  
USB printer  
monitor  
2 x USB 2.0  
WARNING: To reduce the risk of electrical shock, fire, or damage to  
the equipment, do not plug telecommunications/telephone connections  
into the network interface controller (NIC) connectors.  
Å
Ä
CAUTION: Do not add additional, optional hardware devices to your  
personal computer until the operating system is successfully installed.  
Doing so may cause errors and may prevent the operating system from  
installing properly.  
1–2  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting the Power Cords  
Å WARNING: To reduce the risk of electric shock or damage to the equipment:  
Do not disable the power cord grounding plug. The grounding plug is  
an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet that is  
easily accessible at all times.  
Disconnect power from the personal computer by unplugging the  
power cord from either the electrical outlet or the personal computer.  
1. Remove the warning label covering the PC’s power connector,  
and ensure that the voltage setting is correct for your country.  
(Refer to Appendix C, in section “Power Cord Set  
Requirements.” The voltage is set during manufacture and should  
already be correct.)  
2. Connect the power cords to the rear of the monitor and the  
computer. (The connectors are shaped to go in one way only).  
Voltage Selection  
Switch  
3. Connect the monitor’s power cord and the computer’s power cord  
to a grounded outlet.  
Using Your PC  
Starting Your PC for the First Time  
Turn on the monitor, then press the power button (located on the front  
panel) to turn on the PC. The first time you turn on the personal  
computer, the operating system is installed automatically. This  
process takes about 5 to 10 minutes, depending on which operating  
system is being installed. Carefully read and follow the instructions  
that appear on the screen to complete the installation. If required, the  
product ID number is printed on a label affixed to the PC.  
CAUTION: Once the automatic installation has begun, DO NOT TURN  
OFF THE COMPUTER UNTIL THE PROCESS IS COMPLETE. Turning off the  
personal computer during the installation process might damage the  
software that runs the personal computer.  
Ä
When the Welcome to Windows screen is displayed, the Windows  
installation process is complete.  
Quick User’s Guide  
1–3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Customizing the Monitor Display  
You can manually select or change the monitor brand, model, refresh  
rates, color, resolution, and power management settings. Right-click  
on the Windows Desktop, then click Properties to change display  
settings, or refer to the online documentation provided with the  
graphics controller utility.  
Protecting Your Software  
To protect your software from loss or damage, you should keep a  
backup copy of all system software, applications, and related files  
stored on your hard drive. Refer to your operating system or backup  
utility documentation for instructions on making backup copies of  
your data files.  
Compaq Restore Solution  
Restore the original operating system and factory-installed software  
by using the Compaq Restore Plus! CD and any other CDs that came  
with the computer. Carefully read and follow the instructions for the  
restore solution that came with the computer the computer.  
For questions about or problems with this CD, please contact Compaq  
Customer Support.  
Registration  
Be sure to register your new personal computer with Compaq.  
Registration establishes a record of ownership and gives you an  
opportunity to receive product announcements, updates, and other  
communications periodically, if you choose to do so. Registration is  
easy—just visit the Compaq Web site at www.compaq.com/register  
and follow the instructions that appear on the screen.  
1–4  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Turning Off the PC  
To properly turn off the personal computer, first shut down the  
operating system software. In Microsoft Windows operating systems,  
click Start > Shut Down.  
To turn off power to the computer in the event that the operating  
system does not respond to the Shut Down command, press and hold  
the power button for five seconds.  
Accessibility  
Compaq is committed to designing products, services, and programs  
with improved usability and accessibility for all customers. Compaq  
products with Microsoft Windows XP preinstalled, or that are XP  
Ready, are designed for accessibility. These products are tested with  
industry-leading Assistive Technology products to ensure equal  
access—anytime, anywhere...to anyone.  
For More Information  
Additional information, software, and driver updates are available on  
the Compaq Web site at: www.compaq.com/support (search for Evo  
D510 e-pc).  
Quick User’s Guide  
1–5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Troubleshooting  
Basic Troubleshooting  
Overview  
This chapter is intended for basic troubleshooting only. A  
comprehensive Troubleshooting Guide is available on the Web at  
If you choose to use an operating system different than what was  
shipped with your PC, refer to the following support Web site at  
http://www.compaq.com/support for additional support that may be  
available.  
Helpful Hints  
If you encounter some minor problem with your computer, monitor,  
or software, refer to the following list of general suggestions before  
taking further action:  
Check that the computer and monitor are plugged into a working  
electrical outlet.  
Check to see that the computer is turned on and the green power  
light is on.  
Check to see that the monitor is turned on and the green monitor  
light is on.  
Turn up the brightness and contrast controls of the monitor if the  
monitor is dim.  
Press and hold any key. If the system beeps, then your keyboard is  
operating correctly.  
Check all cable connections for loose connections or incorrect  
connections.  
Quick User’s Guide  
2–1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Reconfigure your computer after installing a non–plug and play  
option. Refer to “Solving Hardware Installation Problems” on  
page 2-7 for instructions.  
Be sure that all the needed device drivers have been installed. For  
example, if you have connected a printer, you need to install a  
printer driver.  
Take out all removable media from the removable media drives  
when you turn on your system.  
CAUTION: When the computer is plugged into an AC power source,  
there is always power applied to the system board. You must disconnect  
the power cord from the power source before opening the computer to  
prevent system board or component damage.  
Ä
Solving Minor Problems  
You may be able to easily resolve the minor problems described in  
this section. If a problem persists and you are unable to resolve it  
yourself or if you feel uncomfortable about performing the operation,  
contact your Compaq authorized dealer or reseller.  
Solving Minor Problems  
Problem  
Cause  
Solution  
Computer will not  
turn on.  
Computer is not  
connected to an external  
power source.  
Connect to an external power source.  
Cables to the external  
power source are  
unplugged.  
Ensure that cables connecting the  
computer to the external power  
source are plugged in properly and  
the wall outlet is active.  
Drive power, data, or  
power supply cables may  
not be properly  
Reseat drive power, data, and power  
supply cables.  
connected.  
2–2  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solving Minor Problems (Continued)  
Problem  
Cause  
Solution  
The unit temperature was  
exceeded. The fan may  
be blocked.  
1. Unit is in an exceedingly hot  
environment. Let it cool down.  
2. Ensure that computer air vents  
are not blocked and internal fan  
is running.  
Contact Compaq authorized reseller  
or service provider.  
Power-On Self Test  
(POST) displays an  
error.  
For more detailed help refer to the  
troubleshooting information which is  
for Evo D510 e-pc).  
You hear a buzzing  
noise.  
This is the pre-boot  
diagnostics capability  
feature. It detects  
1. Count the number of beeps after  
the buzzer.  
2. Contact Customer Support.  
problems with your PC.  
Computer appears  
Software control of the  
power switch is not  
Press and hold the power button for  
at least 5 seconds until the computer  
turns off.  
locked up and will not  
turn off when the power functional.  
button is pressed.  
Computer date and  
time display is  
incorrect.  
RTC (real-time clock)  
battery may need to be  
replaced. Battery life is  
approximately 3–5 years. Appendix A, “Replacing the Battery”  
for instructions on installing a new  
First, reset the date and time under  
Control Panel. If the problem persists,  
replace the RTC battery. Refer to  
battery, or contact your Compaq  
authorized dealer or reseller for RTC  
battery replacement.  
Computer powered off  
automatically.  
The unit temperature may  
have been exceeded. The  
fan may be blocked.  
1. Unit is in an exceedingly hot  
environment. Let it cool down.  
2. Ensure that computer air vents  
are not blocked and internal fan  
is running.  
Contact Compaq authorized reseller  
or service provider.  
Quick User’s Guide  
2–3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solving Minor Problems (Continued)  
Problem  
Cause  
Solution  
The unit temperature was  
exceeded because the  
computer was functioning  
with the cover.  
Replace cover and let the computer  
cool down before attempting to turn  
on power to the computer.  
Computer appears to  
pause periodically.  
Network driver is loaded  
and no network  
connection is established. Device Manager to disable the  
network controller.  
Establish a network connection, or  
use Computer Setup or Windows  
Cannot remove  
computer cover.  
Port Control System is  
installed and locked in  
place, or cable lock is  
used and must be  
removed.  
Remove Port Control System or cable  
lock.  
Cursor will not move  
using the arrow keys on be on.  
the keypad.  
The Num Lock key may  
Press the Num Lock key. The Num  
Lock light should not be on if you  
want to use the arrow keys.  
Blank monitor screen.  
Monitor is not turned on  
and the monitor light is  
not on.  
Turn on the monitor and check that  
the monitor light is on.  
The cable connections are Check the cable connection from the  
not correct.  
monitor to the computer and to the  
electrical outlet.  
The energy saver feature  
has been enabled.  
Press any key or click the mouse  
button and, if set, type your  
password.  
You are using a  
Be sure that the monitor can accept  
the refresh rate and resolution chosen.  
fixed-sync monitor and it  
will not sync at the  
resolution chosen.  
The keyboard is not  
working.  
The keyboard cable is not Plug the cable into the correct  
correctly connected.  
connector on the back of the PC.  
Color coding is used for easy  
matching.  
The keyboard is dirty.  
Check all keys are at the same  
height, and none are stuck.  
2–4  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solving Minor Problems (Continued)  
Problem  
Cause  
Solution  
The keyboard itself is  
defective.  
Either replace the keyboard by a  
known working unit or try the  
keyboard with another PC.  
You are not using the  
correct driver, or you  
Download the latest driver from the  
need to update the driver. www.compaq.com/support (search  
The keyboard driver is  
provided with all  
for Evo D510 e-pc).  
Windows 2000 and  
Windows XP preloaded  
systems. For other  
operating systems, refer  
to your operating system’s  
documentation.  
You are not using the  
latest BIOS.  
Download the latest BIOS from the  
for Evo D510 e-pc).  
Your keyboard uses  
batteries, and the  
batteries need to be  
replaced.  
Replace the batteries.  
The mouse is not  
working.  
The mouse cable is not  
correctly connected.  
1. Switch off the PC (not necessary  
with a USB mouse).  
2. Plug the cable into the correct  
connector on the back of the PC  
(color coding is used for easy  
matching).  
3. Switch on the PC.  
You are not using the  
latest BIOS.  
Download the latest BIOS from the  
for Evo D510 e-pc).  
Quick User’s Guide  
2–5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solving Minor Problems (Continued)  
Problem  
Cause  
Solution  
The mouse is dirty (does  
not apply to optical  
mouse).  
Clean the mouse ball as shown  
below.  
The mouse itself is  
defective.  
Replace the mouse by a known  
working unit or try the mouse with  
another PC.  
Your mouse uses  
batteries, and the  
batteries need to be  
replaced.  
Replace the batteries.  
2–6  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solving Hardware Installation Problems  
You may need to reconfigure the computer when you add or remove  
hardware, such as an additional diskette drive. If you install a plug  
and play device, Windows 2000 and Windows XP automatically  
recognize the device and configure the computer. If you install a  
non–plug and play device, you must reconfigure the computer after  
completing installation of the new hardware. In Windows 2000 and  
Windows XP, select the Add New Hardware icon in the Control Panel  
and follow the instructions that appear on the screen.  
Solving Hardware Installation Problems  
Problem  
Cause  
Solution  
A new device is not  
recognized as part of the  
system.  
Cable(s) of new  
Ensure that all cables are properly  
and securely connected and that  
pins in the cable or connector are  
not bent down.  
external device are  
loose or power cables  
are unplugged.  
Power switch of new  
external device is not  
turned on.  
Turn off the computer, turn on the  
external device, then turn on the  
computer to integrate the device  
with the computer system.  
When the system  
Reboot the computer and follow the  
advised you of changes instructions for accepting the  
to the configuration,  
you did not accept  
them.  
changes.  
Quick User’s Guide  
2–7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A
Replacing the Battery  
The battery that comes with your computer provides power to the  
real-time clock and has a minimum lifetime of about three years.  
When replacing the battery, use a battery equivalent to the battery  
originally installed on your computer. Your computer comes with a  
3-volt lithium coin cell battery.  
The lifetime of the lithium battery can be extended by plugging the  
computer into a live AC wall socket. The lithium battery is only used  
when the computer is NOT connected to AC power.  
WARNING: Your computer contains an internal lithium manganese dioxide  
battery. There is a risk of fire and burns if the battery is not handled properly. To  
reduce the risk of personal injury:  
Å
Do not attempt to recharge the battery.  
Do not expose to temperatures higher than 60°C (140ºF).  
Do not disassemble, crush, puncture, short external contacts, or  
dispose of in fire or water.  
Replace the battery only with the Compaq spare designated for this  
product.  
CAUTION: Before replacing the battery, it is important to back up the  
computer CMOS settings. When the battery is removed or replaced, the  
CMOS settings will be cleared. Refer to the Computer Setup Guide for  
information on backing up the CMOS settings.  
Ä
Quick User’s Guide  
A–1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing the Battery  
Batteries, battery packs, and accumulators should not be disposed of  
together with the general household waste. In order to forward them to  
recycling or proper disposal, please use the public collection system or  
return them to Compaq, their authorized partners, or their agents.  
N
CAUTION: Static electricity can damage the electronic components of  
the computer or optional equipment. Before beginning these procedures,  
ensure that you are discharged of static electricity by briefly touching a  
grounded metal object.  
Ä
1. Exit all software applications, shut down the operating system  
software, turn off the personal computer and any external devices,  
then disconnect the power cord from the power outlet.  
2. Open the chassis, then remove the hard drive and CD-ROM drive.  
3. Locate the battery and battery holder on the system board.  
4. To release the battery from its holder, squeeze the metal clamp  
that extends above one edge of the battery.  
5. When the battery pops up, lift it out.  
Removing a Coin Cell Battery  
A–2  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing the Battery  
6. To insert the new battery, slide one edge of the replacement  
battery under the holder’s lip with the positive side up. Push the  
other edge down until the clamp snaps over the other edge of the  
battery.  
Replacing a Coin Cell Battery  
7. Replace the CD-ROM drive and the hard drive, and then close the  
cover.  
8. Plug in the computer and turn on power to the computer.  
Reset the date and time, your passwords, and any special system  
setups, using Computer Setup. To access Computer Setup, restart the  
computer. When the Compaq logo is displayed, press F8.  
Quick User’s Guide  
A–3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
Specifications  
Operating temperature and humidity ranges may vary depending on  
the mass storage devices installed. High humidity levels can cause  
improper operation of disk drives. Low humidity ranges can  
aggravate static electricity problems and cause excessive wear of the  
disk surface.  
The power consumption and acoustics figures given in the tables  
below are valid for the standard configuration as shipped. These  
figures will vary if some components are changed or added to in the  
initial configuration.  
When the computer is turned off with the power button on the front  
panel, the power consumption falls below 5W, but it is not zero. The  
special on/off method used by these computers considerably extends  
the lifetime of the power supply. To reach zero power consumption in  
“off” mode, either unplug the power outlet or use a power block with  
a switch.  
Quick User’s Guide  
B–1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications for the Compaq Evo D510 e-pc  
Characteristics  
Compaq Evo D510 e-pc  
Weight (configuration with 1 CD-ROM 4.5kg (9.92 pounds)  
drive, excluding keyboard and display)  
Dimensions  
Width:  
Height:  
Depth:  
250mm (9.8in.)  
97mm (3.82in.)  
310mm (12.2in.)  
Sound power level1  
Acoustic noise emission (ISO 7779)  
Idle (typical)  
Sound pressure level at  
operator position  
LpA 24dB(A)  
Operating with hard disk access  
LwA 3.3B(A)  
LwA 3.8B(A)  
LpA 27dB(A)  
Power Supply  
Input voltage (voltage selection switch) 100-127V~ 6A max,  
200-240V~ 4A max  
Input frequency:  
Power consumption - Windows 2000  
Max. operating  
Idle (typical)  
50Hz/60Hz  
115V / 60Hz and 230V / 50Hz  
70W  
50W  
Sleep (suspend)2  
Off  
< 2.5W  
< 2.5W  
Storage Humidity  
8% to 85% (relative)  
(1) Declared values LwAd = LwA + 0.3B(A).  
(2) As an ENERGY STAR partner, Compaq has determined that this  
product meets the ENERGY STAR guidelines for energy efficiency.  
This value is only achieved when “Suspend to RAM” (S3 mode) is  
enabled.  
B–2  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C
Safety & Regulatory Notices  
Regulatory Compliance Identification Numbers  
For the purpose of regulatory compliance certifications and  
identification, your product has been assigned a unique Compaq  
series number. The series number can be found on the product  
nameplate label, along with all required approval markings and  
information. When requesting compliance information for this  
product, always refer to this series number. The series number should  
not be confused with the marketing name or model number of the  
product.  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Quick User’s Guide  
C–1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
Consult the dealer or an experienced radio or television  
technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or  
modifications made to this device that are not expressly approved by  
Compaq Computer Corporation may void the user's authority to  
operate the equipment.  
Mouse Compliance Statement  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Cables  
Connections to this device must be made with shielded cables with  
metallic RFI/EMI connector hoods in order to maintain compliance  
with FCC Rules and Regulations.  
Declaration of Conformity for Products  
Marked with the FCC Logo (United States only)  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
For questions regarding your product, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call 1-800-652-6672 (1-800-OK COMPAQ).  
C–2  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
For questions regarding this FCC declaration, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call (281) 514-3333.  
To identify this product, refer to the part, series, or model number  
found on the product.  
Canadian Notice  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les exigences du  
Règlement sur le matériel brouilleur du Canada.  
Quick User’s Guide  
C–3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
European Union Notice  
Products bearing the CE marking comply with the EMC Directive  
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by  
the Commission of the European Community and if this product has  
telecommunication functionality, the R&TTE Directive (1999/5/EC).  
Compliance with these directives implies conformity to the following  
European Norms (in parentheses are the equivalent international  
standards and regulations):  
EN 55022 (CISPR 22) - Electromagnetic Interference  
EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) - Electromagnetic  
Immunity  
EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics  
EN61000-3-3 (IEC61000-3-3) - Power Line Flicker  
EN 60950 (IEC 60950) - Product Safety  
Japanese Notice  
C–4  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
Energy Star Compliance  
Compaq DeskproWorkstations, Compaq Evo™ Desktops, and  
Compaq Evo Workstations marked with the Energy Star Logo are  
compliant with the U.S. Environmental Protection Agency (EPA)  
Energy Star Computers Program. The EPA Energy Star Logo does  
not imply endorsement by the EPA. As an Energy Star Partner,  
Compaq Computer Corporation has determined the products marked  
with the Energy Star Logo meet the Energy Star guidelines for energy  
efficiency.  
The Energy Star Computers Program was created by the EPA to  
promote energy efficiency and reduce air pollution through more  
energy-efficient equipment in homes, offices, and factories. Compaq  
products achieve this by reducing the power consumption when not  
being used. Instructions for using the energy saving features of your  
computer are located in the “Power Management” section of the  
Desktop Management Guide.  
The power management feature of your computer is compatible with  
any network operating system or environment that supports APM1.2.  
This means the users in those environments will not be disconnected  
from the network during the low-power operating state.  
The Power Management feature, when used in conjunction with an  
external Energy Star compliant monitor, will support the power-down  
features of the monitor. The Power Management feature allows an  
external monitor to go into low-power mode when the energy save  
timeout occurs. To take advantage of this energy savings, the monitor  
Power Management feature has been preset to power down the  
monitor after 15 minutes of system inactivity. Refer to the “Power  
Management” section of the Desktop Management Guide for  
instructions on modifying or disabling this feature.  
CAUTION: Using the Energy Save Monitor feature with non–Energy Star  
compliant monitors may cause video distortion when the Energy Save  
timeout occurs.  
Ä
Quick User’s Guide  
C–5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
German Ergonomics Notice  
Compaq Deskpro Workstations, Compaq Evo Desktops, and Compaq  
Evo Workstations, when combined with Compaq Brand keyboards  
and monitors that bear the “GS” approval mark, meet the  
requirements of ZH 1/618 (German Safety Regulations for Display  
Work Places in the Office Sector). The installation guides included  
with the monitor provide configuration information.  
Laser Safety  
All Compaq systems equipped with a laser device comply with safety  
standards, including International Electrotechnical Commission  
(IEC) 825. With specific regard to the laser, the equipment complies  
with laser product performance standards set by government agencies  
as a Class 1 laser product. The product does not emit hazardous light;  
the beam is totally enclosed during all modes of customer operation  
and maintenance.  
Å WARNING: To reduce the risk of exposure to hazardous radiation:  
Do not try to open the laser device enclosure. There are no  
user-serviceable components inside.  
Do not operate controls, make adjustments, or perform procedures to  
the laser device other than those specified herein.  
Allow only authorized Compaq service providers to repair the laser  
device.  
CDRH Regulations  
The Center for Devices and Radiological Health (CDRH) of the U.S.  
Food and Drug Administration implemented regulations for laser  
products on August 2, 1976. These regulations apply to laser products  
manufactured from August 1, 1976. Compliance is mandatory for  
products marketed in the United States.  
Compliance with International Regulations  
All Compaq systems equipped with CD-ROM drives comply with  
appropriate safety standards including IEC 825.  
C–6  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
Laser Product Label  
The following label or equivalent is located on the surface of Compaq  
laser products:  
This label indicates that the  
product is classified as a CLASS  
1 LASER PRODUCT. This label  
appears on a laser device  
installed in your product.  
If you have an LS-120 drive or  
an LS-260 drive, this label is  
located next to the Class 1 Laser  
Product label on your system.  
Laser Information  
Laser Type: Semiconductor GaAIAs  
Wave Length: 780 +/- 35 nm  
Divergence Angle: 53.5 Degrees +/- 0.5 degrees  
Output Power: Less than 0.2 mW or 10,869 W·m-2 sr-1  
Polarization: Circular 0.25  
Numerical Aperture: 0.45 inches +/- 0.04 inches  
Quick User’s Guide  
C–7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
Battery Replacement Notice  
WARNING: Your computer contains an internal lithium manganese dioxide,  
Å
vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire  
and burns if the battery pack is not handled properly. To reduce the risk of  
personal injury:  
Do not attempt to recharge the battery.  
Do not expose to temperatures higher than 60°C (140°F).  
Do not disassemble, crush, puncture, short external contacts, or  
dispose of in fire or water.  
Replace only with the Compaq spare designated for this product.  
Batteries, battery packs, and accumulators should not be disposed of  
together with the general household waste. In order to forward them to  
recycling or proper disposal, please use the public collection system or  
return them to Compaq, your authorized Compaq partners, or their  
agents.  
N
C–8  
Quick User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Regulatory Notices  
Power Cord Set Requirements  
The computer is equipped with a manual voltage select switch  
marked 115/230 and is designed to operate on input voltages between  
100-127V on the 115V setting or 200-240V on the 230V setting.  
The power cord set (flexible cord or wall plug) received with this  
product meets the requirements for use in the country where you  
purchased the equipment.  
If you need to obtain a power cord for a different country, you should  
purchase a power cord that is approved for use in that country.  
The power cord must be rated for the product and for the voltage and  
current marked on the product’s electrical ratings label. The voltage  
and current rating of the cord should be greater than the voltage and  
current rating marked on the product. In addition, the diameter of the  
wire must be a minimum of 0.75 mm2 or 18AWG, and the length of  
the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you  
have questions about the type of power cord to use, contact your  
Compaq authorized service provider.  
A power cord should be routed so that it is not likely to be walked on  
or pinched by items placed upon it or against it. Particular attention  
should be paid to the plug, electrical outlet, and the point where the  
cord exits from the product.  
Quick User’s Guide  
C–9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Conair Trimmer HCT495 User Manual
Conair TV VCR Combo HCT401 User Manual
Cooper Lighting Indoor Furnishings CFD User Manual
Craftsman Lawn Mower 91738741 User Manual
Crown Audio Microphone PZM 11LLWR User Manual
Dymo Sander 31 250 User Manual
EdgeStar Beverage Dispenser KC2000SSTWIN User Manual
Everpure Water System 255349 User Manual
Fisher Price Baby Toy 73458 User Manual
Fortinet Network Card FortiDB 400B User Manual