ENGLISH
Important Information
CAUTION
Customer Support
The user is responsible for operating this product wisely.
The product is intended for use only as a navigational aid
and should not be used when precise measurement of
direction, location, distance or topography is required.
In this user's manual, you should find all the information you
need to operate your GPS 100 S. If you require further
assistance after reading through this manual, Cobra®
Electronics offers the following customer support services:
Operating Instructions for Your
The Cobra Electronics Corporation™
line of quality products includes:
In the USA:
CAUTION
Automated Help Desk is available in English
24 hours a day, 7 days a week at 773-889-3087.
GPS (Global Positioning System) is operated by the U.S.
government, which is solely responsible for its accuracy and
maintenance. The system is subject to changes, which could
affect the accuracy and performance of GPS equipment.
CB radios
microTALK radios
GPS 100 S
Customer Service Operators are available in
English and Spanish at 773-889-3087 Monday
to Friday, 8:00 a.m. to 6:00 p.m. CST.
®
GLOBAL POSITIONING SYSTEM RECEIVER
Radar/ Laser Detectors
Questions can be faxed to 773-622-2269.
CAUTION
Automated Technical Assistance is available
in English or Spanish 24 hours, 7 days a week via
e-mail at: [email protected]
Safety Alert®
Remove the batteries from the unit if you do not expect to
use it for months at a time. As with any batteries, leakage
can occur. When re-installing batteries, observe proper polarity.
Traffic Warning Systems
On-line answers to frequently asked questions
Accessories
(in English only) can be found at: www.cobra.com.
WARNING
Outside the U.S.A., please contact your local dealer.
GPS (Global Positioning System)
Warning: If you choose to use this device in a vehicle, it
is the sole responsibility of the operator of the vehicle to use
this device in a safe manner. Be careful to avoid being
distracted from safe and proper driving practices.
®
Non-English Manuals
HighGear Accessories
The GPS 100 S is equipped to communicate in the language
of your choice: English, Dutch, French, German, Italian,
Portuguese, Spanish or Swedish, (see “System Page-
Settings: Languages,” page 36).
CobraMarine™ VHF Radios
Power Inverters
WARNING
For operating instructions in Dutch, French, German,
Italian, Portuguese, Spanish or Swedish please visit
www.cobra.com/ gps-manuals.html.
Warning: If you choose to use this device in a vehicle, it
is the sole responsibility of the operator to secure the GPS
unit so that it will not cause damage or personal injury in the
event of an accident.
For more information or
to order any of our products,
please visit our website:
FCC Compliance
This device complies with Class B of the FCC rules.
DO NOT mount the GPS receiver over airbag panels or in a
place where the driver or passengers are likely to have an
impact with the device in an accident or collision.
www.cobra.com
Nothing comes close to a Cobra®
Operation is subject to the condition that this device
does not cause harmful interference. It must accept any
interference received, including that which may cause
undesirable operation.
Cobra Electronics Corporation™ reserves the right to change
or improve information in this manual without notice. Please
visit www.cobra.com for updates or questions.
Printed in China
Part No. 480-130-P
Revise 1/ 04
©2003 Cobra Electronics Corporation™
6500 West Cortland Street
Chicago, IL 60707 USA
Nothing comes close to a Cobra®
Download from Www.Somanuals.com. All Manuals Search And Download.
A1
TA B LE O F C O N T E N T S
Important Information........................................................................................................ A1
Product Features ............................................................................................................... A2–A3
Welcome.......................................................................................................................... 1
GPS General Information.................................................................................................... 2–4
Basic Operation................................................................................................................. 5–7
Installing Batteries...................................................................................................... 5
Using the Buttons....................................................................................................... 5–6
Turning the Power On ................................................................................................. 6
Powersaver Mode....................................................................................................... 6
Navigating with the GPS 100 S ................................................................................... 7
The Five Main Pages.......................................................................................................... 8
2.1 Map Page.................................................................................................................. 9–10
2.2 Gauges Page.............................................................................................................. 11–12
2.3 Trip Meter Page.......................................................................................................... 13–14
2.4 Nav Data Page........................................................................................................... 15–30
Waypoints................................................................................................................. 15–18
Tracks....................................................................................................................... 19–20
Route ....................................................................................................................... 21–25
Delete Options........................................................................................................... 26–28
Editing Text ............................................................................................................... 29
Sort or Search ........................................................................................................... 30
2.5 System Page ............................................................................................................. 31–38
Alert................................................................................................................................ 39
GPS General Information.................................................................................................... 40–42
Specifications.................................................................................................................... 43
Maintenance and Service.................................................................................................... 44
Index............................................................................................................................... 45–46
Accessories....................................................................................................................... 47
Declaration of Conformity................................................................................................... 47
Warranty.......................................................................................................................... 47
1
2
3
4
5
6
7
8
9 Order Form....................................................................................................................... 48
Download from Www.Somanuals.com. All Manuals Search And Download.
W E LC O M E T O T H E G P S 1 0 0
S
G P S G E N E R A L I N F O R M A T I O N
satellite so that a receiver can continuously determine the
time the signal was broadcast. The signal contains data
Ẅ “GoTo” on
ẅ “GoTo” on
Making Travel Easier
Your GPS 100 S receiver makes travel easier through three major ways:
GPS Basics
Map Page
Gauges Page
The Global Positioning System (GPS) is a space-based radio-
navigation system. It consists of 24 satellites, which orbit the
Earth at an altitude of approximately 11,000 miles, and
ground stations. GPS provides users with accurate information
on position, velocity and time. This is available anywhere in
the world and in most weather conditions.
that your GPS receiver uses to compute the locations of the
satellites and to make other adjustments needed for accurate
positioning. Your GPS receiver uses the time difference
between the time of signal reception and the broadcast time
to compute the distance, or range, from the receiver to the
satellite. With information about the ranges to four satellites
and the location of each satellite when the signal was sent,
your receiver can compute its own three-dimensional position:
latitude, longitude, and altitude. People think of GPS as
having three segments: the control, space and user
segments. What follows is a little information about
each segment.
GoTo a Waypoint – The GPS 100 S guides you in a straight line
to a single point. (See Ẅ and ẅ )
Navigate a Route – The GPS 100 gives you the opportunity to
select two or more waypoints to create a route. You can then use
your GPS 100 S to guide you in a straight line from point to point
through your stored route. (See Ẇ and ẇ )
GPS was initiated in 1973 to reduce the proliferation of
navigation aids by the United States Department of Defense.
By creating a robust system that overcame the limitations of
many previously existing navigation systems, GPS became
attractive to a broader spectrum of users. GPS has been
successful in classic applications such as aviation and marine
navigation since it was first developed. Since then, it has
become useful for a wide range of people because its
capabilities are accessible using small, affordable equipment.
What was once available only in very expensive equipment,
Cobra Electronics Corporation™ brings to you with our high-
quality line of affordable handheld GPS receivers
Navigate a Track – The GPS 100 S automatically keeps a record
of your progress as you travel and gives you a graphic representation or
“track log” of the path or track you have taken. You can use the track
log to create a track that you can recall for navigation. The track can be
navigated in the forward or the reverse direction of the original travel.
(See Ẉ and ẉ )
Ẇ Navigate
Route On
ẇ Navigate
Route on
Map Page
Gauges Page
Control Segment
The Control Segment of GPS consists of the Master Control
Station, Monitor Stations and Ground Antennas.
This manual is designed to help you take advantage of these and our
many other features. We suggest that you begin by reading the “General
Information” and “System Sections” first. If you are not familiar with the
satellite navigation technology, these will help you understand the basics.
Then, take your GPS receiver outside and practice while you read the
sections on how to operate it.
The one master control station, located at Falcon Air Force
Base in Colorado Springs, Colorado, USA is responsible for
overall management of the remote monitoring and
transmission sites. As the center for support operations, it
calculates any position or clock errors for each individual
satellite, based on information received from the monitor
stations. Then it "orders" the appropriate ground antennas to
relay the corrective information back to that satellite.
How GPS Works
GPS uses a global network of 24 satellites that transmit radio
signals to earth from high earth orbit. Thankfully for users,
the United States has offered free use of the system to the
international community. Many international user groups have
accepted GPS as the core for an international civil satellite
navigation capability.
Ẉ Navigate
Track on
ẉ Navigate
Track on
Five monitor stations are located at Falcon Air Force Base in
Colorado, Hawaii, Ascension Island in the Atlantic Ocean,
Diego Garcia Atoll in the Indian Ocean and Kwajalein Island in
the South Pacific Ocean. Each of the monitor stations checks
the exact altitude, position, speed and overall health of the
orbiting satellites. The control segment uses measurements
collected by the monitor stations to predict each satellite's
orbit and clock. The prediction data is up-linked, or
Map Page
Gauges Page
GPS service provides users with extremely accurate
positioning information anywhere on or near the surface of
the earth. To accomplish this, each of the 24 satellites emits
signals to receivers below. GPS determines location by
computing the difference between the time that a signal is
sent and the time it is received. GPS satellites carry atomic
clocks that provide extremely accurate time information. The
time information is placed in the codes broadcast by the
transmitted, to the satellites for transmission back to the
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
G P S G E N E R A L I N F O R M A T I O N
G P S G E N E R A L I N F O R M A T I O N
users. The control segment also ensures that the
GPS satellite orbits and clocks remain as designed. A
station can track up to 11 satellites at a time. Each station
performs this "check-up" twice a day, as the satellites
complete their journeys around the earth. Noted variations,
such as those caused by the gravity of the moon and sun and
the pressure of solar radiation, are passed along to the
master control station.
or a billionth of a second. The atomic clocks within the
Set Data Display
Map Page
Data Field Choices Descriptions
satellites are so accurate because even an extremely
small time inaccuracy would translate into a extremely
large position difference (1/ 100 of a second inaccuracy
translates to a position difference of 1,860 miles to any
GPS receiver).
Your GPS 100 S has the ability to display various types of
information to you. In order to take advantage of the rich
information available to you, it is important that you
understand the meaning of certain terms. Below is a list
of terms that will aid you in using your GPS 100 S.
External Components
Accuracy - the distance within which the unit can accurately
locate a position
Avg Speed - average speed throughout the current
navigation
Bearing - the direction you are currently heading
Date - the current date
Destination - the destination is the last point on a route, or
the end of a track
Elevation - your current elevation above sea level
ETA - Estimated Time of Arrival, based on the average speed
you have traveled over the course of your entire route or track
Location - your current location shown in degrees/ minutes
of latitude and longitude
Max Speed - the highest speed that you have traveled
during the current navigation
Odometer - total cumulative distance traveled since the last
time the odometer was reset
The exterior of the GPS satellite has a variety of
antennas. The signals generated by the radio transmitter
are sent to your GPS receiver via L-band antennas.
Another component of the satellite is the radio
transmitter, which generates the signal. Each of the 24
satellites transmits its own unique code in the signal.
The last of the three pieces of the control segment of GPS
are the ground antennas. Ground antennas monitor and track
the satellites from horizon to horizon. They also transmit
correction information to individual satellites.
Gauges Page
Set Data Display
Space Segment
The space segment includes the satellites and the Delta
rockets that launch the satellites from Cape Canaveral in
Florida. GPS satellites fly in circular orbits at an altitude of
10,900 miles (17,500 km) and with a period of 12 hours.
The orbits are tilted to the earth's equator by 55 degrees to
ensure coverage of the polar regions. Powered by solar cells,
the satellites continuously orient themselves to point their
solar panels toward the sun and their antenna toward the
earth. Each of the 24 satellites, positioned in 6 orbital
planes, circles the earth twice a day.
User Segment
You and your GPS receiver are a part of the user segment
along with many other private individuals and military
personnel and their GPS receivers. Military GPS equipment
has been integrated into fighters, bombers, tankers,
helicopters, ships, submarines, tanks, jeeps and soldiers'
equipment. GPS is also used on Space Shuttles.
Cutting-edge Satellite navigation technology coupled with
your GPS receiver can help overcome many of the hardships
and hazards associated with recreation. Your GPS receiver
allows you to go practically anywhere with confidence
knowing precisely where you are at all times. With your
GPS receiver, you will be able to record accurately any
location and return to that precise spot time and again,
any time, anywhere.
Set Data Display
Trip Meter Page
Power - power icon showing power source (external or
battery), battery charge level, and backlight On or Off
Speed - your current speed
Time - the current time in your selected time zone
Trip Odom - the distance traveled since the last time the trip
odometer was reset
The satellites are composed of three major subsystems: Solar
Panels, Internal Components and External Components.
Solar Panels
Each satellite is equipped with solar array panels. These
panels capture energy from the sun, which provides
power for the satellite throughout its life.
Trip Time - the trip time is the total time that has elapsed
during your current navigation since your last reset
Internal Components
Internal components are subsystems such as atomic
clocks and radio transmitters. Each satellite contains four
atomic clocks. These clocks are accurate to a nanosecond
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
B A S I C O P E R A T I O N
B A S I C O P E R A T I O N
1
1
Ẅ ẅ
The ENTER Button ẇ
ẇ ENTER Button
Installing Batteries Ẅ ẅ
Pressing and releasing the ENTER button accepts a highlighted selection.
Your GPS 100 S operates on two standard AA batteries (not included).
Always use high-quality alkaline batteries. To install batteries, twist the D-ring
connector counterclockwise (anticlockwise) and remove the battery
compartment cover. Insert two AA batteries ensuring correct polarity
alignment. Replace the battery compartment cover and twist the D-ring
clockwise to lock.
The ENTER button can also be used as a Waypoint
shortcut. To mark a new waypoint using current location, press and
hold the ENTER button for 2 seconds. A confirmation window will pop up.
Turning the Power On Ẉ ẉ
ẉ
Ẉ Power Button
Startup Screen
To turn on your GPS 100 S, press and hold the POWER button for 2
seconds. A start-up screen appears for a few seconds, followed by a screen
that shows that the unit is attempting to lock onto signals from GPS
satellites. Once three satellite signals have been acquired, the screen will
automatically switch to the Map page and the unit is ready to use.
As an optional power source, an Automotive Power Adapter (not included,
see “Optional Accessories”, page 47) can be used with your GPS 100 S.
Ẅ POWER Button
Using the Buttons
You can access all features of your GPS 100 S by using three buttons. After
reading the general explanations below, please refer to “Using the Map
Page,” page 9, to begin using the buttons to operate your unit.
NOTE: The unit must be outside with a clear view of the sky to acquire
satellite signals for navigation.
To turn the power off, press and hold the POWER button for 2 seconds.
The POWER Button Ẅ
NOTE: When you use the GPS 100 S for the first time, it will take up to
approximately 50 seconds to lock on to the GPS satellites.
Pressing and holding the POWER button for 2 seconds will turn the device
on or off.
ẋ
Enter Button
GPS Status
Screen
Ẋ
Powersaver Mode Ẋ ẋ
With the unit turned on, pressing and releasing the POWER button will turn
on the display backlight. The display will remain lit until no buttons have
been pushed for 15 seconds (for more details, see page 31).
ẅ PAGE Button
If you wish to save battery power while using just the non-navigational
features of your unit, you can turn GPS navigation off. To do so, select “No”
and press the ENTER button before the screen automatically changes to the
Map page.
The PAGE Button ẅ
Pressing and releasing the PAGE button allows you to cycle through the five
main pages (described in the next section). If you have proceeded to one of
the menus (described later in this manual), the PAGE button is an “escape”
key, allowing you to exit the menu and return to the main page. At any
time, press and hold the PAGE button for 2 seconds to display the Page List
menu. From this menu you can go directly to any main page.
In Powersaver Mode, no GPS functions will be available until you turn GPS
back on. To do so, please refer to page 33 of this manual.
Ẇ ZOOM IN/ OUT Button
NOTE: You can turn GPS off at any time. Please see “Turning GPS Off and
On,” page 33.
The ZOOM IN/ OUT Button Ẇ
When a map is displayed, you can use the ZOOM IN/ OUT button to zoom in
or zoom out on the image of the map. Also, whenever you see a menu of
selections, using the ZOOM IN/ OUT button allows you to scroll through the
selections displayed. A side scroll bar next to a menu indicates that more
selections can be viewed by scrolling beyond the bottom or top of the list
that is currently visible.
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
B A S I C O P E R A T I O N
T H E F I V E M A I N P A G E S
1
2
Ẅ Map Page
ẅ Gauges Page
Ẅ Waypoint
Navigating with the GPS 100 S
The Five Main Pages
Your GPS 100 S receives signals from Global Positioning System satellites
that are in fixed orbits (stationary relative to the ground) around the earth.
By acquiring – or locking onto – the signals from at least three satellites,
your unit can use triangulation to precisely determine your current position,
elevation above sea level and bearing (the direction you are traveling). As you
travel, the unit automatically acquires the strongest satellite signals available
at your current location. By becoming familiar with the unit’s basic operating
features, you will be able to use its powerful navigational capabilities.
In the following sections of this manual, you will learn how to use five main
pages to access all the features of your GPS 100 S:
Map Page Ẅ
The Map page displays a map of your current position in relation to any
waypoints that you have selected. It can show you the direction of travel to
a selected destination. The Map page also shows you the track that you
have traveled along. If you have created a route, the map can show you
that route and your current position on it. (See page 9)
ẅ Track
Waypoint Ẅ
Gauges Page ẅ
Ẇ Trip Meter
ẇ Nav Data
A waypoint is a specific location that you ask the unit to record. In this
manual, you will learn how to mark your current location as a waypoint, or
set the coordinates for a waypoint anywhere in the world. You can create
and store up to 500 waypoints. You can have
The Gauges page displays a compass that shows your current direction of
travel or the direction to your next waypoint. The data field currently showing
“speed” is user-selectable. (See page 11)
Page
Page
the unit show you the direction of travel to an individual waypoint, or
how to navigate along a series of waypoints.
Trip Meter Page Ẇ
The Trip Meter page displays a number of user-selectable fields with information
about your current location, the progress you have made, your direction of
travel, your speed of travel and the time of your trip. (See page 13)
Track ẅ
Your GPS 100 S automatically keeps a record of your travel, called a track. The
unit shows you a map-like picture of your track. You can create and store up
to 10 different tracks. Each track can be recalled and used for navigation as
the unit shows you how to retrace the track again, either forward or in the
reverse direction. When traveling in unfamiliar territory, this is a quick and easy
way to make sure you always know how to get back to your starting point.
Ẇ Route
Nav Data Page ẇ
The Nav Data page allows you to store and select waypoints for navigation,
use the unit’s automatic tracking feature and program and recall a route to
selected destinations. (See page 15)
Ẉ System Page
System Page Ẉ
Route Ẇ
The System page allows you to choose the various settings and formats that
the unit uses to navigate and display information. (See page 31)
A route is a series of waypoints which you choose to navigate in a specific
sequence. Up to 50 waypoints may be stored in a route. Once you have created
a route, your GPS 100 S will guide you from waypoint to waypoint. As you
reach each waypoint, the unit automatically begins navigating to the next one.
NOTE: Whenever satellite lock is lost or GPS is turned OFF, certain
animation icons (below) appear on screen and continue to loop until GPS is
ON and/ or satellite lock is re-acquired. (See page 41)
ẇ Trip Meter
Trip Meter ẇ
Animation sequence that appears
when satellite lock is lost
Along with the navigational features, the trip meter in your GPS 100 S
keeps accurate time, allowing it to precisely calculate your speed of travel,
average speed throughout your trip and estimated time of arrival (ETA) if
you have chosen a destination.
Animation sequence that appears when GPS is
turned OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
M A P P A G E
M A P P A G E
2 .1
2 .1
Usin g th e Ma p Pa g e
Usin g th e Ma p Pa g e
ẅ Select Options
Ẅ Map Page
ẉ Map Details Ẋ Set Auto Zoom
Map Page Ẅ
(North Up)
The Map page displays a graphic representation of the navigation currently
in progress. Any waypoints, routes or tracks that you are using will be
displayed. A black ▲ (triangle) in the middle points to the direction you are
currently traveling. A data field at the bottom of the screen shows you
information of your choosing about your position or navigation. You can
zoom in and out on the map image by using the ZOOM IN/ OUT button. You
have a number of options for customizing the display, (details below).
Map Detail Option ẅ ẉ
Highlight and select DETAIL to show/ hide any or all of the details to be
displayed on the map. These details include names of waypoints, waypoint
symbols, your navigational route and travel completed so far (track).*
Auto Zoom Option ẅ Ẋ
Highlight and select AUTO ZOOM to turn this feature on or off. When this
feature is on, the scale of the map adjusts automatically to show the entire
navigation currently in progress. When this feature is off, you adjust the
scale of the map manually using the ZOOM IN/ OUT button.*
Selecting Options Ẅ ẅ
From the Map page, press and release the ENTER button to display the Map
Page Options menu. Use the ZOOM IN/ OUT button to scroll through the
menu sections, then press the ENTER button to go to the highlighted option.
Use the ZOOM IN/ OUT button again to highlight your choice, then press the
ENTER button to select it. Press the PAGE button to return to the main page.
ẋ Stop Nav
Ẍ Defaults
On/ Off
On/ Off
Ẇ Orient Map
ẇ Set Data
Stop Nav Option ẅ ẋ
Display
Display
To stop the current navigation (GoTo, Route or Track), highlight and select
STOP NAV. Highlight and select YES to stop. Highlight and select NO to
make the current navigation continue.*
Orient Option ẅ Ẇ
Defaults Option ẅ Ẍ
Highlight and select ORIENT to designate the orientation of the map display.
To make the screen always represent magnetic north, highlight and select
NORTH UP (see Ẅ). To make the screen always represent the direction
of travel, highlight and select TRACK UP (see Ẉ).
Highlight and Select DEFAULTS to restore all original default Map page
settings. Highlight and select YES to restore original settings to map
Orientation = North Up; Data field information = Speed; map Details
shown = Names, Symbols, Route, Track; Auto Zoom = On. Highlight
and select NO to maintain all current settings.
Set Data Option ẅ ẇ Ẉ
Highlight and select SET DATA to choose the information about your current
position or navigation that you want to be displayed at the bottom of the
Map page. Highlight and select FULL MAP to show the entire image of the
map currently in use (see Ẉ). Highlight and select from the following for
display at the bottom of the page: Accuracy, Average Speed, Bearing, Date,
Destination, Elevation, ETA, Location, Maximum Speed, Odometer, Power,
Speed, Time, Trip Odometer, Trip Time (see Ẅ). (For more information about
the optional data selections, see “Data Descriptions,” page 4)
Ẉ Full Map
(Track Up)
continued
*See “Using the Nav Data Page,” page 15, to learn about this feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
10
G A U G E S P A G E
G A U G E S P A G E
2.2
2 .2
Usin g th e Ga u g e s Pa g e
Usin g th e Ga u g e s Pa g e
Ẅ Compass
ẋ Set Data List Ẍ Data from
Set Data List
ẅ Select Options
Gauges Page Ẅ
The Gauges page displays a compass that indicates direction of travel. It can
show the direction you are currently traveling or the direction from your current
position to the next waypoint in your navigation.
Set Data Option ẅ ẋ Ẍ
Displays on
Gauges Page
Highlight and select SET DATA to choose information about your current
position or navigation that you want displayed at the bottom of the Gauges
page. You may highlight and select from the following: Accuracy, Average
Speed, Bearing, Date, Destination, Elevation, ETA, Location, Maximum
Speed, Odometer, Power, Speed, Time, Trip Odometer, Trip Time. (For more
information about the optional data selections, see “Data Descriptions,”
page 4)
Selecting Options Ẅ ẅ
From the Gauges page, press and release the ENTER button to display the
Gauges Page Options menu. Use the ZOOM IN/ OUT button to scroll through
the menu sections, then press the ENTER button to go to the highlighted
option. Use the ZOOM IN/ OUT button again to highlight your choice, then
press the ENTER button to select it. Press the PAGE button to return to the
main page.
Ẇ Pointer
Settings
Stop Nav Option ẅ ẗẖ
ẗẖ Stop Nav
ẗẗ Restore
Defaults
To stop the current navigation (GoTo, Route or Track), highlight and select
STOP NAV. Highlight and select YES to stop. Highlight and select NO to
make the current navigation continue.*
Yes/ No
Yes/ No
Pointer Options ẅ Ẇ ẇ Ẉ ẉ Ẋ
ẇ Bearing
Ẉ Right of
Highlight and select POINTER to designate the compass display information
about your course Ẇ. Highlight and select BEARING to make the compass
indicate the direction to your next waypoint ẇ. Highlight and select COURSE
to make the compass indicate direction to your next waypoint with arrows
that show if you are on course Ẋ or left ẉ or right Ẉ of course. This
display also shows how many feet or meters off course you are currently.*
continued
Course
Defaults Option ẅ ẗẗ
Highlight and Select DEFAULTS to restore all original default Gauges page
settings. Highlight and select YES to restore original settings to Pointer =
Bearing; Data field information = Speed. Highlight and select NO to
maintain all current settings.
ẉ Left of Course Ẋ On Course
*See “Using the Nav Data Page,” page 15, to learn about this feature.
*See “Using the Nav Data Page,” page 15, to learn about this feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
12
T R I P M E T E R P A G E
T R I P M E T E R P A G E
2.3
2 .3
Usin g th e Trip Me te r Pa g e
Usin g th e Trip Me te r Pa g e
ẅ Option Settings
Ẅ Trip Meter Info
ẉ Data Options Ẋ Stopping Nav
Trip Meter Page Ẅ
The Trip Meter page displays information about your current position, the
navigation in progress and other available data. It can display up to 5 fields
that you can select from a total of 15 choices.
Set Data Option ẅ ẉ
Highlight and select SET DATA to choose the fields you want displayed on
the Trip Meter page. (Highlight and select the field you want to change –
the highlighted field will blink – then highlight and select the new field
from the menu.) Menu includes: Accuracy, Average Speed, Bearing, Date,
Destination, Elevation, ETA, Location, Maximum Speed, Odometer, Power,
Speed, Time, Trip Odometer, Trip Time. (For more information about the
optional data selections, see “Data Descriptions,” page 4)
Selecting Options Ẅ ẅ
From the Trip Meter page, press and release the ENTER button to display the
Trip Meter Page Options menu. Use the ZOOM IN/ OUT button to scroll
through the menu sections, then press the ENTER button to go to the
highlighted option. Use the ZOOM IN/ OUT button again to highlight your
choice, then press the ENTER button to select it. Press the PAGE button to
return to the main page.
Stop Nav Option ẅ Ẋ
Ẇ Reset Values ẇ Font Size
ẋ Restore
Defaults
To stop the current navigation, highlight and select STOP NAV.
Highlight and select YES to stop. Highlight and select NO to have current
navigation continue.*
Reset Option ẅ Ẇ
Yes/ No
Highlight and select RESET to reset any or all of the Trip Meter values to 0.
Highlight and select ALL to reset all values to 0, or highlight and select
individual values: Maximum Speed, Average Speed, Trip Odometer, Trip
Time, Odometer, Track Log.
Defaults Option ẅ ẋ
Highlight and Select DEFAULTS to restore all original default Trip Meter
page settings. Highlight and select YES to restore original settings to
Font Size = Small 5-Field; Data field information = Location, Speed,
Trip Odometer, Odometer, Maximum Speed. Highlight and select NO to
maintain all current settings.
Font Size Option ẅ ẇ Ẉ
Highlight and select FONT SIZE to increase or reduce the size of the text
displayed in each field. Highlight and select SML 5-FIELD for smaller text
with 5 data fields displayed or highlight and select LRG 3-FIELD for larger
text with 3 data fields displayed.
Ẉ LRG 3–FIELD
Option
NOTE: The lower two fields from 5-field screen will be hidden when
switching to 3-field.
continued
*See “Using the Nav Data Page,” page 15, to learn about this feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
14
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Usin g th e N a v Da ta Pa g e
Wa y p o in ts: Su m m a ry
Ẅ Nav Data
Page Display
Select Option Ẉ ẉ Ẋ ẋ Ẍ
ẅ Hiker
Ẋ Edit Info
ẋ Delete
Waypoint
Nav Data Page Ẅ
Highlight and choose SELECT to access any waypoint on the list. Highlight
and select GOTO to return to the Map page to navigate to the selected
waypoint (see “GoTo a Selected Waypoint,” page 18). Highlight and select
EDIT to change the name, symbol, location coordinates or elevation of the
selected waypoint Ẋ. Highlight and select DELETE to delete the selected
waypoint ẋ. Highlight and select PREVIEW to view a graphic representation
of the selected waypoint from your current location Ẍ. The image can be
zoomed in and out.
Icons
The Nav Data page gives you access to the powerful navigational features of
your GPS 100 S. From this page, you can create and store up to 500
waypoints. For each one, you can choose a name and assign a symbol.
Using the navigational features, you can ask the unit to show you the
“GoTo” direction of travel to reach a selected waypoint.
Go To
Waypoint
Navigate
Track
Navigate
Route
You can also create and store up to 10 tracks. Your GPS 100 S
automatically keeps a record of your progress as you travel and gives you a
graphic representation of the track you have taken. You can have the unit
guide you in the reverse direction along the same track.
New Option Ẉ ẗẖ
Highlight and select NEW to add a new waypoint to the list. Highlight and
select MARK CURRENT to save the coordinates for your current location as a
waypoint. The default name (a 3-digit number) and symbol (a flag) will be
assigned. You can either accept the default name and symbol or rename and
change the symbol of the waypoint (see “Editing Text”, page 29). (You can
use Waypoints/ Select/ Edit to change them later.) Highlight and select
ENTER MANUAL to enter the location coordinates for a waypoint manually
(see “Editing Text,” page 29). Entering an elevation is optional. The default
name (a 3-digit number) and symbol (a flag) will be assigned. (You can use
Waypoints/ Select/ Edit to change them later.)
You can select two or more waypoints to create a route. Your GPS 100 S
will then show you the way to follow the route accurately.
Ẇ Navigation
ẇ Navigation
Ẍ Preview
ẗẖ Add New
on Map
On Gauges
Waypoint
Waypoint
ẅ Whenever navigation is in progress, a hiker icon will appear in the lower
right hand corner of the Map Page and Gauges Page Ẇ ẇ.
Waypoints
When you select WAYPOINTS from the Nav Data page, (see Ẅ), your
GPS 100 S will display a list of the waypoints currently stored. You can
create, save and recall up to 500 waypoints. If you want to change the
location for a waypoint, its location coordinates can be edited. You can ask
the unit to show you the “GoTo” direction of travel to reach any waypoint
you select.
Waypoint shortcut: To mark a new waypoint using current location,
press and hold the ENTER button for 2 seconds. A confirmation window
will pop up.
Sort Option Ẉ ẗẗ
ẗẗ Sort List of
ẗẘ Search Existing
Ẉ Select Stored
ẉ View
Highlight and select SORT to sort the list of waypoints according to name,
symbol, nearest waypoint or most recently saved waypoint. Highlight and
select NAME to sort waypoints in alphabetical order by name. Highlight and
select SYMBOL to have waypoints with that symbol displayed first
(waypoints with the same symbol are sorted alphabetically). Highlight and
select NEAREST to have waypoints sorted by distance from your current
location, with the nearest listed first. Highlight and select MOST RECENT to
sort waypoints according to when they were saved, with the most recent
listed first (see “Sort or Search,” page 30).
NOTE: You can store up to 50 waypoints into a route.
Waypoints
Waypoint List
Waypoints
Direction
NOTE: You can record your current location as a waypoint at any time
simply by pressing the ENTER button for 2 seconds, or by following the
procedure described on page 16, under “New Option.”
Selecting Options Ẅ
From the Nav Data Page, highlight using the ZOOM IN/ OUT button and
select WAYPOINTS by pressing the ENTER button. Use the ZOOM IN/ OUT
button to scroll through the menu sections, then press the ENTER button to
go to the highlighted option. Use the ZOOM IN/ OUT button again to highlight
your choice, then press the ENTER button to select it. Press the PAGE button
to return to the main page.
Search Option Ẇ ẗẘ
Highlight and select SEARCH to search the list of waypoints for a name that you
entered. Press the ENTER button to begin entering the name you want to search
(see “Editing Text,” page 29). The name of the waypoint containing the letters
you entered is highlighted on the list (see “Sort or Search,” page 30).
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
15
16
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Wa y p o in ts: Cre a tin g N e w
Wa y p o in ts: Go To
Ẅ Nav Data
Page
Ẅ Nav Data
ẅ New
Waypoint
ẅ Selecting Stored
“GoTo” a Selected Waypoint
To make the map show the navigational path to a selected waypoint:
Creating a New Waypoint
To mark your current location as a new waypoint:
Page
Waypoint
1. From the Nav Data Page, highlight using the ZOOM IN/ OUT button and
select WAYPOINTS by pressing the ENTER button Ẅ. Highlight and select
SELECT ẅ.
Waypoint shortcut: To mark a new waypoint using current location,
press and hold the ENTER button for 2 seconds. A confirmation window
will pop up.
2. Highlight and select the waypoint you want to navigate or “GoTo” Ẇ.
The waypoint information screen for that waypoint appears with four
selections: GoTo, Edit, Delete and Preview ẇ.
1. From the Nav Data Page, highlight using the ZOOM IN/ OUT button and
select WAYPOINTS by pressing the ENTER button Ẅ Highlight and
select NEW ẅ.
3. Highlight and select GOTO to navigate to your selected waypoint ẇ.
This will bring up the Map page with the GoTo path between your current
position and the selected “GoTo” waypoint Ẉ.
2. Highlight and select MARK CURRENT Ẇ. The waypoint information screen
appears ẇ. A default name (a 3-digit number) and symbol (a flag) will
be assigned. You can either accept the default name and symbol or rename
and change the symbol of the waypoint (see "Editing Text", page 29).
Ẇ Current or
ẇ Information
Ẇ Select
ẇ Waypoint
Manual
Screen
NOTE: You can Preview the selected waypoint’s location on the map by
selecting PREVIEW in the waypoint information screen. Selecting OK in the
Preview screen will return you to the waypoint information screen.
Waypoint
Information
3. When you have finished editing your new waypoint, select SAVE ẇ to
return to the main Nav Data page Ẅ. To return to the main Nav Data
Page without saving the new waypoint, press the PAGE button ẉ.
While in the Gauges Page, a navigation or “GoTo” is illustrated by a flag and
hiker icon in the bottom right hand corner of the screen. Also, your selected
GoTo waypoint and distance to that waypoint are shown above
the compass ẉ.
To enter any location as a new waypoint manually:
1. From the Nav Data Page, highlight using the ZOOM IN/ OUT button
and select WAYPOINTS by pressing the ENTER button Ẅ Highlight and
select NEW ẅ.
2. Highlight and select MANUAL Ẇ. The waypoint information screen
appears Ẉ. A default name (a 3-digit number) and symbol (a flag)
will be assigned. You can either accept the default name and symbol or
rename and change the symbol of the waypoint (see "Editing Text,"
page 29). The Location field will blink.
Ẉ Information
ẉ Return to Nav
Screen
Data Page
Ẉ “GoTo” on
ẉ “GoTo” on
Map Page
Gauges Page
3. Enter the location (latitude and longitude) of your new waypoint,(see
"Editing Text," page 29).
4. Highlight Elevation, the field will blink. Enter the location's elevation
(see "Editing Text," page 29).
NOTE: ELEVATION does not need to be entered to save your new waypoint.
5. When you have finished editing your new waypoint, select SAVE ẇ to
return to the main Nav Data page Ẅ. To return to the main Nav Data
Page without saving the new waypoint, press the Page button ẉ.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
18
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Tra ck s: Su m m a ry
Tra ck : N a vig a tio n
Ẅ Nav Data
Page
Ẅ Nav Data
ẅ View Stored
ẅ Stored
Navigate a Selected Track
To make the map show the navigational path along a selected track:
Tracks
Page
Tracks
Tracks
When you select TRACKS from the Nav Data page (see Ẅ), your GPS 100
S will display a list of the tracks currently stored. Your unit will automatically
record a track as you travel. You can store up to 10 tracks and later recall
any of those tracks to use for navigation. Your unit can guide you along a
selected track in either direction.
1. From the Nav Data Page, highlight using the ZOOM IN/ OUT button and
select TRACKS by pressing the ENTER button Ẅ.
2. Highlight and select the track you want to navigate ẅ. A map of the
selected track appears with three selections: Navigate, Rename and
Delete Ẇ.
NOTE: Your GPS 100 S automatically begins tracking your travel whenever
it is turned on and linked to satellites. It keeps the recorded travel stored in
its log even when the power is turned off, starting a new tracking "session"
when it is turned back on. Old tracks will remain in memory (2,000
tracking points) unless erased by user (see "Deleting Individual Tracks,"
page 28).
3. Highlight and select NAVIGATE to navigate through your selected
track Ẇ. Highlight and select FORWARD to navigate from the beginning
to the end of the selected track ẇ. Highlight and select REVERSE to
navigate from the end to the beginning of the selected track ẇ.
Ẇ Save or
Recall Track
ẇ Save Options
Ẉ Name Track
Ẇ Track Preview ẇ Directions
and Options
4. This will bring up the Map page with the track path shown Ẉ.
Selecting Options Ẅ ẅ
While in the Gauges Page, Track navigation is illustrated by a curved double
line and hiker icon in the bottom right-hand corner of the screen. Also, your
selected track and distance to complete the navigation of that track are
shown above the compass ẉ.
From the Nav Data page, highlight using the ZOOM IN/ OUT button and
select TRACKS by pressing the ENTER button to display the Tracks screen.
Use the ZOOM IN/ OUT button to scroll through the list of tracks, then press
the ENTER button to go to the highlighted track. Use the ZOOM IN/ OUT
button again to highlight your choice, then press the ENTER button to select
it. Press the PAGE button to return to the main page.
Log Option ẅ Ẇ ẇ Ẉ
Highlight and select LOG to save the current track or scroll to recall a track
saved previously ẅ. Highlight and select SAVE Ẇ to save either THIS
SESSION ẇ (the travel recorded since the unit was last turned on) or the
ENTIRE LOG ẇ (all travel recorded since the log was last cleared) (see
CLEAR below). You can either accept the default name (the current date)
or rename the track before saving Ẉ (see “Editing Text,” page 29).
Highlight and select CLEAR Ẇ to clear the log of all travel that has been
recorded. The unit automatically restarts recording your travel.
Ẉ Navigation
ẉ Navigation on
ẉ Accessing
on Map
Gauges Page
Tracks
Ẋ Direction
Ẍ Delete
Select Option ẅ ẉ Ẋ ẋ Ẍ
ẋ Enter Name
Highlight and select any stored track for navigation, renaming or deletion ẅ.
Highlight and select NAVIGATE ẉ and then FORWARD or REVERSE Ẋ to
display the map page showing you the direction to travel to follow on the
selected track. Highlight and select RENAME ẉ to change the name of a
selected track ẋ (see “Editing Text,” page 29). Highlight and select
DELETE ẉ to delete the selected track Ẍ.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
20
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Ro u te s: Su m m a ry
Ro u te s: Cre a tin g N e w
Ẅ Nav Data
Page
ẅ Designating
Ẅ Nav Data
ẅ Route Page
Creating a New Route
To create a new route consisting of up to 50 waypoints:
Route
New Route
Page
When you select ROUTE from the Nav Data page (see Ẅ), you can use your
GPS 100 S to designate a route consisting up of to 50 waypoints. The unit
will then guide you along the route. As you reach each waypoint, the unit
will automatically begin pointing you to the next waypoint, until you reach
your final destination.
1. From the Nav Data page, highlight using the ZOOM IN/ OUT button and
select ROUTE Ẅ, by pressing the ENTER button. Highlight and select
NEW ẅ. A screen displaying OVERWRITE EXISTING? appears Ẇ.
2. Highlight and select YES Ẇ. A blank NEW ROUTE list appears with the
first field already highlighted ẇ.
Selecting Options Ẅ ẅ
From the Nav Data page, highlight using the ZOOM IN/ OUT button and
select ROUTE by pressing the ENTER button to display the Route screen. Use
the ZOOM IN/ OUT button to scroll through the menu sections, then press
the ENTER button to go to the highlighted option. Use the ZOOM IN/ OUT
button again to highlight your choice, then press the ENTER button to select
it. Press the PAGE button to return to the main page.
3. Select that blank field ẇ. A list of all the waypoints you currently have
stored appears Ẉ.
4. Highlight and select SELECT Ẉ. Highlight the waypoint you want to put
into your route. You can sort or search the list (see "Sort" and "Search,"
page 16).
Ẇ Navigating
ẇ Creating
Ẇ Overwrite
ẇ Display New
Along Route
New Route
Existing Route
Route List
continued
Navigate Option ẅ Ẇ
Highlight and select NAVIGATE to make your GPS 100 S guide you along a
route you have created (see “New Option” below). Highlight and select
FORWARD to navigate forward along a route from start to end point or
highlight and select REVERSE to navigate in a reverse direction from end point
to start point.
New Option ẅ ẇ
Ẉ Waypoints
ẉ Editing
Highlight and select NEW to create a new route. When the OVERWRITE
EXISTING? screen appears, highlight and select YES to create your new
route (see “Creating A New Route,” page 22) or NO to cancel creation
of a new route.
Listed
Waypoints
Ẉ Display
Waypoints
Edit Option ẅ Ẉ ẉ
Highlight and select EDIT to add or delete any waypoints you have selected
in creating a new route. On the Edit screen highlight and select REMOVE to
delete a waypoint, INSERT to insert a waypoint or DONE to save changes
and return to Route screen ẉ.
Ẋ Viewing
Waypoints
Details Option ẅ Ẋ
Highlight and select DETAILS to see any or all of the waypoints of a specific
route you have planned. Highlight and select OK to return to main Nav Data page.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
22
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Ro u te s: Cre a tin g N e w
Ro u te s: In se rtin g a Wa y p o in t
ẉ Highlight
Waypoint
Ẋ Add
Waypoint
Ẅ Nav Data
ẅ Edit Route
Creating a New Route (continued)
5. Select the highlighted waypoint to add it to to your route ẉ. The New
Route list appears with the added waypoint displayed Ẋ.
Inserting a Waypoint into a Route
To add a waypoint to an existing route:
Page
List
1. From the Nav Data page, highlight using the ZOOM IN/ OUT button
and select ROUTE by pressing the ENTER button Ẅ. Highlight and select
EDIT ẅ. The Edit Route list of waypoints in your route appears Ẇ.
Use the ZOOM IN/ OUT button to highlight the next blank field. Repeat steps
3 to 5 to add more waypoints.
6. When you have finished adding waypoints to your route, press the PAGE
button to return to the main Nav Data page Ẍ.
2. Highlight and select the waypoint that will come immediately before the
one you want to add Ẇ. An EDIT menu appears ẇ.
Insert/ Remove Waypoints in Route ẋ
3. Highlight and select INSERT ẇ. A list of all waypoints appears Ẉ.
To insert a waypoint into the route, highlight and select the waypoint that
will come immediately before the one you want to add. Highlight and select
INSERT ẋ. When the list of all waypoints appears, select the waypoint to
insert as you did in Ẉ, ẉ and Ẋ above.
4. Highlight and select SELECT Ẉ. Highlight the waypoint you want to add
to your route. If you wish, you can sort or search the list (see “Sort” and
“Search,” page 16).
ẋ Change
Ẇ Access Edit
ẇ Highlight
Waypoint
Menu
Insert
5. Select the highlighted waypoint to add it to your Route Ẉ. The Edit
Route list appears with the added waypoint displayed.
To remove a waypoint in the route, highlight and select the waypoint you
want to remove. Highlight and select REMOVE ẋ. Your New Route list will
automatically be updated to reflect the waypoint removal.
Repeat the previous steps if you wish to add more waypoints to your route.
6. When you have finished adding waypoints to your route, select DONE to
return to the main Nav Data page ẉ.
Ẍ Return
to Nav
Data
Ẉ Highlight
ẉ Return To Nav
Waypoint
Data Page
Page
Download from Www.Somanuals.com. All Manuals Search And Download.
23
24
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Ro u te s: N a vig a tio n
De le te O p tio n s: Su m m a ry
Ẅ Nav Data
Page
ẅ Navigate
Ẅ Nav Data
ẅ Access Delete
Navigate a Selected Route
To make the map show the navigational path along the route:
Delete Options
When you select DELETE OPTIONS from the Nav Data page (see Ẅ), you can
delete waypoints, tracks or routes that you have created or delete all data
currently stored.
Route
Page
Options
1. From the Nav Data Page, highlight using the ZOOM IN/ OUT button and
select ROUTE by pressing the ENTER button Ẅ. A map of the selected
route appears with four selections: Navigate, New, Edit and Details ẅ.
Selecting Options Ẅ ẅ
2. Highlight and select NAVIGATE to navigate through your selected
route ẅ. Highlight and select FORWARD to navigate from the beginning
to the end of the selected route Ẇ. Highlight and select REVERSE to
navigate from the end to the beginning of the selected route Ẇ.
From the Nav Data page, highlight and select DELETE OPTIONS to display
the Delete Options screen. Use the ZOOM IN/ OUT button to scroll through
the menu sections, then press the ENTER button to go to the highlighted
option. Use the ZOOM IN/ OUT button again to highlight your choice, then
press the ENTER button to select it. Press the PAGE button to return to the
main page.
3. This will bring up the Map page with the route path shown ẇ.
Ẇ Direction
ẇ Navigation
Ẇ Delete
Waypoints
or Tracks
ẇ Delete
NOTE: You can view the list of waypoints in the route by selecting DETAILS
in the route options screen. Selecting OK in the Details screen will return you
to the route options screen.
On Map
Waypoints Option ẅ Ẇ
Routes
Highlight and select WAYPOINTS if you wish to delete any or all of the waypoints
you have stored. Highlight and select ONE-BY-ONE to delete waypoints one
at a time (see “Deleting Individual Waypoints,” page 27). Highlight and
select ALL to delete all waypoints currently stored.
While in the Gauges Page, Route navigation is illustrated by a group of flags
and hiker icon in the bottom right-hand corner of the screen. Also, the next
waypoint on your route navigation and the distance to that waypoint are
shown above the compass Ẉ.
Tracks Option ẅ Ẇ
Highlight and select TRACKS if you wish to delete any or all of the tracking
sessions currently in memory. Highlight and select ONE-BY-ONE to delete
track sessions one at a time (see “Deleting Individual Tracks,” page 28).
Highlight and select ALL to delete all tracks currently in memory.
Ẉ Navigation on
Route Option ẅ ẇ
Gauges Page
Ẉ Delete All
Highlight and select ROUTE if you wish to delete the route you currently
have stored. Highlight and select DELETE – YES and the entire route will be
deleted. Highlight and select DELETE – NO to cancel the delete function.
Data
All Option ẅ Ẉ
Highlight and select ALL if you wish to delete all waypoints, tracks and the
route you currently have stored. Highlight and select DELETE ALL NAV DATA –
YES and the data will be deleted. Highlight and select DELETE ALL NAV DATA
– NO to cancel the delete function.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
26
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
De le te O p tio n s: In d ivid u a l Tra ck s
De le te O p tio n s: In d ivid u a l Wa y p o in ts
Ẅ Delete a
Waypoint
ẅ Access
Delete Menu
Ẅ Delete
ẅ Access
Delete Menu
Deleting Individual Waypoints
To delete selected waypoints one at a time:
Deleting Individual Tracks
To delete selected tracks one at a time:
Track
1. From the Nav Data page, highlight using the ZOOM IN/ OUT button and
select DELETE OPTIONS by pressing the ENTER button Ẅ. The Delete
Options menu appears ẅ.
1. From the Nav Data page, highlight using the ZOOM IN/ OUT button and
select DELETE OPTIONS by pressing the ENTER button Ẅ. The Delete
Options menu appears ẅ.
2. Highlight and select WAYPOINTS ẅ. The Delete menu appears Ẇ.
2. Highlight and select TRACKS ẅ. The Delete menu appears Ẇ.
3. Highlight and select ONE-BY-ONE Ẇ. A list of all waypoints currently
stored appears ẇ. You can sort or search the list (see “Sort” and
“Search,” page 16).
3. Highlight and select ONE-BY-ONE Ẇ. A list of all saved tracks appears ẇ.
4. Highlight and select the track you wish to delete ẇ. A Delete
Confirmation menu appears Ẉ.
4. Highlight and select SELECT. The first waypoint is highlighted ẇ.
5. Highlight and select YES Ẉ and the list of all tracks will appear with the
selected track deleted ẉ. Highlight and select NO Ẉ to return to the
tracks list ẇ. Highlight and select DONE Ẉ to return to the main Nav
Data Page Ẅ.
Ẇ Choose Delete ẇ Highlight
Ẇ Select Deletion ẇ Highlight
5. Highlight the waypoint you wish to delete ẇ. A Delete Confirmation
menu appears Ẉ.
Method
Waypoints
Method
Track
6. Highlight and select YES Ẉ and the list of all waypoints appears with
the selected waypoint deleted ẉ. Highlight and select NO Ẉ to return
to the list of all waypoints currently stored ẇ. Highlight and select
DONE Ẉ to return to the main Nav Data Page Ẅ.
Repeat steps 4 and 5 to delete other tracks.
6. When you have finished deleting, press the PAGE button to return to the
main Nav Data page Ẋ.
Repeat steps 5 and 6 to delete other waypoints.
7. When you have finished deleting, press the PAGE button to return to the
main Nav Data page Ẋ.
Ẉ Confirm
ẉ View Revised
Ẉ Confirm
ẉ View Revised
Deletion
Waypoints List
Deletion
Tracks List
Ẋ Return to Nav
Ẋ Return to Nav
Data Page
Data Page
Download from Www.Somanuals.com. All Manuals Search And Download.
27
28
N AV D A TA P A G E
N AV D A TA P A G E
2 .4
2 .4
Ed itin g Te x t
So rt O r Se a rch
Ẅ Use ZOOM
ẅ Highlighting
Ẅ Waypoints
ẅ Sort Menu
Editing Text
To enter or change the information displayed or enter information into a search
field for a waypoint, track or route, use the following procedure:
Sort Option
1. From any screen with the SORT option, highlight and select SORT Ẅ.
IN/ OUT
Button
Spaces
List
2. Choose from the following choices:
• Alphabetically by name:
a. The list of waypoints and 4 options will be presented: NAME,
SYMBOL, NEAREST, MOST RECENT. Highlight and select NAME ẅ.
1. From any screen that allows you to enter letters, numbers or symbols
(names of waypoints/ tracks/ routes, dates, etc.), use the ZOOM IN/ OUT
button to scroll to the field you want to edit and press the ENTER button Ẅ.
• By a chosen symbol (with the selected symbol listed first and waypoints
with the same symbol sorted alphabetically):
a. The list of waypoints and 4 options will be presented: NAME,
SYMBOL, NEAREST, MOST RECENT. Highlight and select SYMBOL ẅ.
b. A list of waypoint symbols appears. Highlight and select the symbol
you want at the top of the list Ẇ.
2. Highlight the space where you want to insert a letter or symbol, or the
character you want to change ẅ. Press the ENTER button to bring up a
pop-up menu showing the characters to choose from Ẇ.
3. Scroll through the characters until the one you want is highlighted Ẇ.
Press the ENTER button to select it. The new character appears in place
and is highlighted.
Ẇ Access Menu
ẇ Next Character
Ẇ Symbols List
ẇ Search
of Characters
Appears
• Nearest waypoint to your current location:
a. The list of waypoints and 4 options will be presented: NAME,
SYMBOL, NEAREST, MOST RECENT. Highlight and select
NEAREST ẅ.
4. Press the ENTER button again to accept the new character Ẉ. The
character next to it will be highlighted ẇ.
Repeat the same procedure to change the next character if desired. Press the
ZOOM IN/ OUT button to skip characters you do not want to change.
• According to when they were saved with the most recently saved
waypoint listed first:
a. The list of waypoints and 4 options will be presented: NAME,
SYMBOL, NEAREST, MOST RECENT. Highlight and select MOST
RECENT ẅ.
To clear a selected character and all characters that follow it, highlight the
Backspacer symbol (at the end of the menu) ẉ. Press the ENTER
button to finish editing.
Ẉ Choosing Your
5. When you have finished entering or changing all characters, press the
3. The waypoint list appears sorted. Continue your pervious activities.
Letter
Ẉ Accept New
ẉ Clear a
ENTER button. Highlight the
Down character (at the beginning of
Search Option
Character
Character
the menu) and press the ENTER button Ẋ.
To search any list of waypoints for a particular name:
1. From any screen with the SEARCH option, highlight and select SEARCH Ẅ.
If necessary, use the ZOOM IN/ OUT button to scroll to the next field you
want to edit and follow the same procedure to enter or change characters.
2. Select (by pressing the ENTER button) the highlighted blank space to enter
the first letter of the name you are searching for (see “Editing Text,”
page 29) ẇ.
3. The waypoints containing that letter first appear at the top of the list.
• Continue to enter letters into the blanks until the waypoint you are
searching for appears highlighted at the top of the list Ẉ.
• Accept the current highlighted waypoint. Scroll to select the waypoint
you are searching for.
Ẋ Highlight “Down”
Character
4. Continue your previous activities.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
30
S Y S T E M P A G E
S Y S T E M P A G E
2 .5
2 .5
Usin g th e Sy ste m Pa g e
Usin g th e Sy ste m Pa g e
Ẅ System
Page
ẅ Turn GPS
Navigation
On/ Off
Defaults Option Ẅ ẋ
Ẋ Access
About
ẋ Access
Defaults
Option
System Page Ẅ
Highlight and Select DEFAULTS to restore all original default settings for the
entire GPS 100 S system. Highlight and select YES to restore original settings
(see chart below). Highlight and select NO to maintain all current settings.
The System page gives you various options for changing the system settings
used by your GPS 100 S. From this page you can turn GPS navigation on and
off and adjust settings for features such as display, sounds, time, compass,
map, method of navigation, activate WAAS, change map datum, etc.
Option
System Page Defaults
Function
GPS Status
Backlight time out 15 seconds
Clock Format
Time Zone
Daylight Saving
(Summer Time)
Language
Default
On
Function
Sounds
WAAS
Default
On
On
Cardinal
WGS 84
Selecting Options Ẅ
From the System page, use the ZOOM IN/ OUT button to scroll through the
menu sections, then press the ENTER button to go to the highlighted option.
Use the ZOOM IN/ OUT button again to highlight your choice, then press the
ENTER button to select it. Use the PAGE button to back up to the main page.
12 Hour
Current Location Map Datum
Auto
Compass
Position Format hddd˚mm.mm
North Reference True
Battery Saver
Satellites Ẅ ẅ Ẇ
English
Off
Measurement Units English
ẇ Adjust
Display
Ẇ Access
Navigational
To turn GPS navigation on and off, highlight and select SATELLITES, (see
"Turning GPS On and Off," page 33). Highlight and select GPS MODE.
Highlight and select YES or NO in response to the prompt to access your
unit’s navigational features or to disable your unit’s navigational features.
(Turning GPS mode off preserves battery power.)
Ẍ Status Bar
Gauges Defaults
Settings
Features
Function
Default
Function
Data Field
Default
Speed
Pointer
Bearing
Map Page Defaults
Trip Meter Defaults
Display Options Ẅ ẇ
Function
Default
Function
Data Field
Default
5 Fields*
Location
To adjust the display Contrast and Backlight settings, highlight and select
DISPLAY, (see ”Adjusting the Display,” page 34). Highlight and select
CONTRAST to increase or decrease the display contrast. Highlight and select
BACKLIGHT to designate the duration of time the backlight will stay lit.
Orient
Data Field
Details Shown
North Up
Speed
Names (show)
Symbols (show)
Route (show)
Track (show)
On
Speed
Trip Odom
Odometer
Max Speed
3 Fields
Location
Speed
Settings Option Ẅ Ẉ
Auto Zoom
Highlight and Select SETTINGS to change the following system settings:
Clock Format, Time Zone, Daylight Saving, Language, Units, Sounds (see
"Using the Settings Screen," page 35).
Data Field
Ẉ Settings
ẉ Advanced
Settings
Trip Odom
*default font size
Advanced Option Ẅ ẉ
Highlight and Select ADVANCED to change the following advanced
operational parameters used by your unit: WAAS, Compass, Map Datum,
Position Format, North Reference, Battery Saver (see "Using the Advanced
Screen," page 37).
Status Bar Indicator Ẍ Ẅ
The status bar at the bottom of the System page updates information
automatically. You can see whether the backlight is on or off, as well as the
current date and time. You can also determine the present status of the
battery as the battery symbol increases the amount of black from the top
down as it discharges.
About Option Ẅ Ẋ
Highlight and select ABOUT to display certain system information. Information
displayed includes: percentage of memory used; unit serial number, software
version and applicable patent numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
32
S Y S T E M P A G E
S Y S T E M P A G E
2 .5
2 .5
GPS O ff/ O n
Ad ju stin g th e Disp la y
Ẅ Access
Selections
ẅ Adjust
Ẅ Turning GPS ẅ Location Screen
Turning GPS Off and On
Adjusting the Display
You can adjust various settings for your unit’s display.
Settings
Off/ On
Appears
When indoors, you can turn GPS navigation off, allowing you to use the
non-navigational features of your GPS 100 S while preserving battery power.
When you turn GPS off, the unit stops searching for signals from satellites.
When you turn GPS back on to receive signals, the unit must re-acquire
signals from at least three satellites before it can begin navigation.
1. From the System page, highlight using the ZOOM IN/ OUT button and
select DISPLAY by pressing the ENTER button Ẅ. CONTRAST and
BACKLIGHT appear ẅ.
2. SELECT will be highlighted ẅ. To adjust contrast or backlight settings,
press the ENTER button. Contrast field will begin to blink Ẇ.
NOTE: The unit must be outside with a clear view of the sky to acquire
satellite signals for navigation.
3. Choose from the following. You only need to select the settings you
want to change.
To turn GPS off:
1. From the System page, highlight using the ZOOM IN/ OUT button and
select SATELLITES by pressing the ENTER button Ẅ. A LOCATION screen
appears, showing the satellite signals being received with the signal strength
of each indicated. The satellites that are currently acquired by the unit for
navigation are highlighted ẅ.
• Contrast
Ẇ Save
Settings
ẇ Change
Ẇ Use with
ẇ Stop
Highlight and select CONTRAST Ẇ. Using the ZOOM IN/ OUT button
you will now be able to change the contrast of the display screen ẇ.
Press the ENTER button to complete your CONTRAST adjustment.
Contrast
GPS Off?
Receiving
• Brightness
2. Select GPS MODE ẅ. “USE WITH GPS OFF?”menu will appear Ẇ.
Highlight and select BACKLIGHT Ẇ. This will allow you to change
the length of time the screen’s backlight remains lit each time
the unit is turned on. (Once you have selected BACKLIGHT, the title
of the selected field will begin to blink.) Press the ENTER button to
activate the TIME OUT menu Ẉ. Highlight and select the time
interval you want.
3. Highlight and select YES Ẇ. The unit will immediately turn GPS off and
stop receiving satellite signals.
4. Press the PAGE button to return to the System page ẉ
.
To turn GPS on:
1. From the System page, highlight using the ZOOM IN/ OUT button and select
SATELLITES by pressing the ENTER button Ẅ. A blank LOCATION screen
appears ẇ.
WARNING: If you choose STAY ON, battery life will significantly decrease.
Ẉ Select
Backlight
Interval
ẉ Return to
Ẉ Turn GPS On?
4. When you have finished changing display settings, highlight and select
SAVE Ẇ to return to the System page Ẅ.
System Page
2. Select GPS MODE ẅ. “TURN GPS ON?”menu will appear Ẉ.
3. Highlight and select YES Ẉ. Unit will begin searching for satellite signals
until it locks on to three of them.
4. Press the PAGE button to return to System page ẉ.
NOTE: The unit must be outside with a clear view of the sky to acquire
satellite signals for navigation.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
34
S Y S T E M P A G E
S Y S T E M P A G E
2.5
2 .5
Se ttin g Scre e n
Se ttin g Scre e n
Ẅ Change
Settings
ẅ Select Data
ẉ Daylight
Ẋ Language
Options
Using the Settings Screen
From the Settings screen, you can change the various settings listed below.
Field
Savings
• Daylight Saving
To have the clock use daylight saving time (Summer Time), highlight
DAYLIGHT SAVING Ẇ. Press the ENTER button to bring up the menu.
Select AUTO to make the clock switch to daylight saving time
(Summer Time) automatically. Select ON to switch manually back to
daylight saving time (Summer Time). Select OFF to switch manually
the clock to standard time (Winter Time (GMT)) ẉ.
To change settings:
1. From the System page highlight, using the ZOOM IN/ OUT button and
select SETTINGS by pressing the ENTER button Ẅ. A listing appears with
SELECT highlighted ẅ.
2. Press the ENTER button and the title of the first data field will begin to
blink Ẇ. Highlight field you wish to change (highlighted field will blink).
• Language
To choose the language used for the display, highlight LANGUAGE Ẇ.
Press the ENTER button to bring up the menu of languages. Select
from the following English, Dutch, French, German, Italian,
Portuguese, Spanish or Swedish Ẋ.
3. Choose from the following. (You only need to select the settings you
want to change.)
Ẍ Sound On/ Off
Ẇ First Data
ẇ Clock Format
ẋ Measurement
• Clock Format
Field Blinks
To change the format of the time display, highlight CLOCK FORMAT
Ẇ. Press the ENTER button to bring up the menu and select 12
HOUR or 24 HOUR ẇ.
• Units
To choose the system for measuring distance, select UNITS Ẇ. Press
the ENTER button to bring up the menu. Select ENGLISH, METRIC or
NAUTICAL ẋ.
• Time Zone
To choose the time zone you want the clock to use, highlight TIME
ZONE Ẇ. Press the ENTER button to bring up the menu of major
cities. Select USE CURRENT LOCATION or the city that is in the desired
time zone Ẉ, (see page 40 for World City Time Zone chart).
• Sounds
To turn the unit’s sound on or off, select SOUNDS Ẇ. Press the
ENTER button to bring up the menu. Select ON or OFF Ẍ.
4. To save the changes made, highlight and select SAVE Ẇ. To exit this
function without saving changes, press the PAGE button ẗẖ.
continued
ẗẖ Return to
Ẉ Time Zone
System Page
Download from Www.Somanuals.com. All Manuals Search And Download.
35
36
S Y S T E M P A G E
S Y S T E M P A G E
2.5
2 .5
Ad va n ce d Scre e n
Ad va n ce d Scre e n
Ẋ Location
Coordinates
Ẅ Change
Parameters
ẅ Select Data
Using the Advanced Screen
From the Advanced screen, you can change the advanced operational
parameters used by your GPS 100 S.
ẋ Set
Orientation
Fields
• Position Format
To change the format the device uses to display location coordinates,
highlight POSITION FORMAT Ẇ. Press the ENTER button to bring up the
menu select from the following: hddd.ddddd° (degrees, decimal
degrees), hddd°mm.mm (degrees, minutes, decimal minutes),
hddd°mm’ss.s (degrees, minutes, seconds, decimal seconds), British
Grid, Dutch Grid, Finnish KK127 Grid, German Grid, Irish Grid,
Maidenhead, MGRS (Military Grid Reference System), New Zealand,
Qatar Grid, Swedish Grid, Swiss Grid, Taiwan Grid, User Defined Grid,
User Defined Grid, UTM/ UPS (Universal Transfer Mercator/ Universal
Polar Stereograph), W Malaysian R Ẋ.
To change advanced parameters:
1. From the System page, highlight using the ZOOM IN/ OUT button and
select ADVANCED by pressing the ENTER button Ẅ. A menu of advanced
parameters appears. SELECT will be highlighted ẅ.
2. Press the ENTER button and the title of the first data field will begin to
blink Ẇ. Highlight field you wish to change (highlighted field will blink).
3. Choose from the following. (You only need to select the settings you
want to change.)
Ẍ Set Interval
ẗẖ Return to
System Page
Ẇ First Data
ẇ WAAS On/ Off
• North Reference
Field Blinks
• WAAS
To change the unit’s method of orientation to the earth’s magnetic field,
highlight NORTH REFERENCE Ẇ (see “About North Reference,”
page 42). Press the ENTER button to bring up the menu. Select TRUE for
true north, MAGNETIC for magnetic north or GRID for grid north ẋ.
To turn the unit’s WAAS receiver on or off, highlight WAAS Ẇ. (See
“What is WAAS,” page 42.) Press the ENTER button to bring up the
menu. Select ON or OFF ẇ.
• Compass
• Battery Saver
To change the method of indicating direction used by the compass,
highlight COMPASS Ẇ. Press the ENTER button to bring up the menu.
To conserve battery life, highlight BATTERY SAVER Ẇ. Press the ENTER
button to bring up the menu. Select ON or OFF Ẍ.
<
Select CARDINAL (standard N-S-E-W), DEGREES ( 0°-360°) or
4. To save changes made, highlight and select SAVE Ẇ. To exit this function
without saving changes, press the PAGE button ẗẖ.
MILS (0000-6400) Ẉ.
• Map Datum
Ẉ Set Compass
ẉ Map Datum
To change the datum used by your unit when comparing information
with a paper map or other navigational reference, highlight MAP DATUM
Ẇ, (see “What is a Map Datum?,” page 42, for details). Press the
ENTER button to bring up the menu. Select the map datum that
matches the item you are comparing ẉ.
Settings
NOTE: Most widely used datum is WGS 84
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
37
38
A LE R T S
G E N E R A L I N F O R M A T I O N
3
4
Ẅ LOST
SATELLITES
Alerts
World City Time Zones
Longitudinal Zone
As you use your GPS 100 S, you may see the following alert messages.
Offset
Ẅ LOST SATELLITES CONTINUE SEARCHING?
E007.50 to E022.50 ................................+1
E172.50 to W172.50 ..............................-12
IDLW (International Date Line West)
W172.50 to W157.50 ............................-11
Nome
You will see this alert if, for any reason, satellite lock is lost. When you see this
message, the unit is automatically trying to re-acquire satellite signals. If you do
nothing, the unit will continue to search for signals and the message will disappear
when satellite lock is regained. You can select YES to continue searching and clear the
alert message. If satellite lock is not regained within 5 minutes, the alert will
reappear. You can select NO to turn off GPS navigation and clear the message.
Rome
ẅ ARRIVING AT
E022.50 to E037.50 ................................+2
DESTINATION!
Cairo
E037.50 to E052.50 ................................+3
W157.50 to W142.50 ............................-10
Honolulu
ẅ NOTICE ARRIVING AT DESTINATION!
Moscow
If you are navigating to a waypoint, or along a track or route, you will see this
message when you are within 500 feet (150 m) of your destination. Select OK
or the PAGE button to clear the message.
Ẇ CAN’T
CREATE
E052.50 to E067.50 ................................+4
W142.50 to W127.50 ..............................-9
Yukon Standard
WAYPOINT
Abu Dhabi
Ẇ CAN’T CREATE WAYPOINT WAYPOINT LIST FULL!
E067.50 to E082.50 ................................+5
You will see this message if you try to save a waypoint when the list is full (you
can save a maximum of 500 waypoints). Select OK or the PAGE button to clear
the message. You will continue to see the message when trying to save a
waypoint until you delete one or more waypoints from memory (see page 26).
W127.50 to W112.50 ..............................-8
Los Angeles
ẇ TRACK LOG
Maldives
ALMOST FULL!
E082.50 to E097.50 ................................+6
W112.50 to W097.50 ..............................-7
Denver
Dhuburi
ẇ WARNING TRACK LOG ALMOST FULL!
This message appears when the track log memory bank is 90% full. Select OK or
the PAGE button to clear the message. The message will reappear each time you
turn on the unit until you clear the track log (see page 26) or the track log
becomes 100% full (see below).
E097.50 to E112.50 ................................+7
W097.50 to W082.50 ..............................-6
Chicago
Ẉ TRACK
Bangkok
LOG FULL!
E112.50 to E127.50 ................................+8
W082.50 to W067.50 ..............................-5
New York
Ẉ WARNING TRACK LOG FULL!
Hong Kong
You will see this message when the track log memory bank is full. The unit will
not be able to store any more track log points until you clear the track log (see
page 26). Select OK or the PAGE button to clear the message. The message will
reappear each time you turn on the unit until the track log is cleared.
E127.50 to E142.50 ................................+9
W067.50 to W052.50 ..............................-4
Caracas
ẉ BATTERIES
LOW!
Tokyo
E142.50 to E157.50 ..............................+10
Sydney
W052.50 to W037.50 ..............................-3
Rio de Janeiro
ẉ WARNING BATTERIES LOW!
This message appears approximately 30 minutes before your batteries need
to be replaced. Select OK or the PAGE button to clear the message. Replace the
batteries as soon as possible. The message will reappear every 10 minutes until
the batteries are replaced.
Ẋ GPS IS
E157.50 to E172.50 ..............................+11
Solomon Islands
W037.50 to W022.50 ..............................-2
Fernando de Noronha
OFF!
E172.50 to W172.50 ............................+12
Auckland
W022.50 to W007.50 ..............................-1
Azores Island
Ẋ NOTICE GPS IS OFF!
This message is displayed any time an action is requested which typically uses GPS
satellite tracking, “GPS on” (example: marking a waypoint or navigating a route).
While GPS mode is set to off, select YES to turn GPS on. Select NO to tell the GPS
unit to assume that you are at your last calculated position.
W007.50 to E007.50........................GMT+0
London
Download from Www.Somanuals.com. All Manuals Search And Download.
39
40
G E N E R A L I N F O R M A T I O N
G E N E R A L I N F O R M A T I O N
4
4
Sources of Interference / Errors:
What is WAAS?
About North Reference
GPS receivers have the potential for position errors due to
interference, primarily from the following sources:
Wide Area Augmentation System (WAAS) is a GPS-based
navigation system that provides precision above and beyond
what GPS can do on its own. WAAS was designed to improve
the accuracy and ensure the integrity of information coming
from GPS satellites.
The vertical grid lines on any map can be aligned in one of
three different ways.
When satellite lock is lost
Ionosphere and troposphere delays
“True North” means that the vertical lines are aligned with
the geographic north pole. This is the most common method
of orienting maps.
Whenever satellite lock is lost, the following animation
sequence appears onscreen and continues to loop until
satellite lock is re-acquired.
The satellite signal slows as it passes through the atmosphere.
The system uses a built-in model that calculates an average
– though not exact – amount of delay.
WAAS is a network of 25 ground reference stations that
cover the entire U.S. plus parts of Canada and Mexico.
Implemented by the Federal Aviation Administration (FAA)
for aviation users, these reference stations are located at
precisely surveyed spots and compare GPS distance
measurements to known values. When the WAAS signal is
available, WAAS-capable receivers typically have a much
higher accuracy than non-WAAS units.
“Magnetic North” means that the vertical lines are aligned
in the direction indicated as north by a compass, which can
differ from True North to varying amounts, depending on
where you are on the earth. (This difference is called
“inclination”and “declination.”)
Signal multi-path
This occurs when the GPS signal is reflected off objects such
as tall buildings before it reaches the receiver. This increases
the travel time of the signal, causing errors.
When GPS is turned Off
Whenever GPS is turned Off, the following animation
sequence occurs and continues to loop until search is
activated by user.
“Grid North” refers to the direction in which the straight lines
on a map are actually aligned, which may be slightly different
from True North, because the rounded surface of the earth
can not be accurately depicted on the flat surface of a map.
Receiver clock errors
The built-in clock can have very slight timing errors.
What is a Map Datum?
Orbital errors
Also known as ephemeris errors, these are inaccuracies of the
satellite’s reported location.
Maps and charts are essentially grids created from a starting
reference point called a “datum.” Many maps being used
today were originally created decades ago. Over the years,
technology has allowed us to improve our surveying skills
and create more accurate maps. However, there is still a
need to adapt GPS receivers to use with older maps.
Also, all data fields (except for power status data
fields) appear blank until GPS is turned On and
satellite lock is re-acquired.
Most common error
Most common error is not having a clear view of the sky, or
being under very cloudy conditions, when a satellite signal
may not be received.
Most navigational charts and maps will have the datum listed.
Cobra Electronics Corporation™ GPS receivers include up to 100
map datums that allow you to switch to a setting that matches
your map. The most common US map datums are World
Geodetic System 1984 (WGS 84), North American Datum
1983 (NAD 83) and North American Datum 1927 (NAD 27)
Number of satellites visible
The more satellites the receiver can see, the better the
accuracy. Buildings, terrain, electronic interference or even
dense foliage can block signal reception, resulting in position
errors or possibly no position reading at all. In general, the
clearer the view of the sky is at your location, the better
the reception will be. GPS receivers will not work indoors,
underwater or underground.
NOTE: Using a map datum that does not match the chart
you are using can result in significant differences in position
information.
Due to the errors that might occur, it is recommended that
the serious navigator use a second navigational tool, such as
a magnetic compass or map.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
42
S P E C I F I C A T I O N S
M A I N T E N A N C E
&
S E R V I C E
5
6
Specifications subject to change.
PERFORMANCE
Maintenance of Your GPS 100 S
Your GPS 100 S is designed and built to give you years of
trouble-free performance without the need for service. No
routine maintenance is required.
Service
Temperature rating for the GPS 100 S may exceed the
usable range of some batteries. Alkaline batteries can
rupture at high temperatures.
Receiver:..........................................18 parallel channels
If you suspect that your unit requires
service, please call 773-889-3087
BEFORE shipping it to Cobra Electronics
Corporation™. This will ensure that you
receive service as quickly as possible.
Alkaline batteries lose a significant amount of their capacity
as temperature decreases.
Acquisition Time:.............................Approximately 10 sec. (warm)
Approximately 35 sec. (cold)
Use Lithium batteries when operating the GPS 100 S in
below freezing conditions.
If your unit does not appear to be operating properly, please
follow these trouble-shooting steps:
Approximately 50 sec.
(first time)
Extensive use of screen backlighting will significantly reduce
battery life.
External power can only be applied using the Cobra
Electronics Corporation™ external power cord/ cable.
Make sure you are using fresh batteries and they are
installed properly.
Update Rate:...................................1/ second, continuous
If you are asked to send your unit to the Cobra Electronics
Corporation™ factory, please follow these steps:
(selectable)
Make sure you are outdoors and away from buildings
and obstructions. Also, make sure you have a clear
view of the sky.
Position Accuracy:...........................up to 3 meters (10 feet)
Velocity Accuracy:...........................0.1 knot / 0.1 km/ h
Dynamics: ........................................Performs to specifications to 6 g’s
Antenna: ..........................................Built-in patch antenna
PHYSICAL
1. Send the complete unit.
2. For warranty repair, enclose some form of
proof-of-purchase, such as a photocopy or carbon copy of
a sales receipt. If you send the original receipt, it cannot
be returned to you.
Make sure you have not accidentally turned GPS off
(see page 33).
Customer Service
In the U.S.A., you can receive technical assistance with your
unit through one of our customer support services:
3. Enclose a typed or clearly written description of the
problem you are having with your unit, plus the name
and address where you want the unit returned.
Case:.................................................Fully gasketted, high impact ABS
plastic, waterproof to 1 meter for
30 min (IPX7 standards)
Automated Help Desk is available in English
24 hours a day, 7 days a week at 773-889-3087.
4. Pack the unit securely to prevent damage during transit.
Size:..................................................4.7” H x 2.3” W x 1.5” D
If possible, use the original packing materials.
(12 cm x 5.8 cm x 3.8 cm)
Customer Service Operators are available in
English and Spanish at 773-889-3087 Monday
to Friday, 8:00 a.m. to 6:00 p.m. CST.
5. Ship prepaid and insured using a traceable carrier such
as United Parcel Service (UPS), Federal Express or first
class mail with delivery confirmation. Ship to:
Weight: ............................................5.3 ounces
Operating Temperature Range:.....5˚F to 158˚F (-15˚C to 70˚C)
Storing Temperature Range: .........-40˚F to 176˚F (-40˚C to 80˚C)
POWER
Questions can be faxed to 773-622-2269.
Cobra Factory Service
Automated Technical Assistance is available
in English or Spanish 24 hours, 7 days a week via
e-mail at: [email protected]
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL 60707 USA
Input:................................................Two 1.5 volt AA batteries and/ or
12-volt DC external power
On-line answers to frequently asked questions
(in English only) can be found at: www.cobra.com.
6. Please allow 3 to 4 weeks before contacting us about the
(vehicle power adapter)
status of your service. Call 773-889-3087 for assistance.
Outside the U.S.A. please contact your local dealer.
Battery Life:....................................Up to 20 hours in battery
save mode
If your unit is under warranty, it will either be repaired or
replaced upon receipt, depending on the model. If your unit
is out of warranty, you will receive a letter informing you of
the repair or replacement charge.
Up to 10-12 hours in continuous
operation out of save mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
44
I N D E X
I N D E X
7
7
Gauges ....................................12 Gauges Page.......................8, 11-12
Map ..........................................9 General Information...........2-4, 40-41
System ....................................32 German Manual............................A1
Trip..........................................14 GoTo.................................1, 16, 18
Delete All Data Option...................26 GPS Components .........................2-3
Delete Options ........................26-28 GPS Mode .............................31, 33
Delete Route..........................21, 26 GPS Off.......................8, 31, 33, 41
Deleting Individual Tracks.........26, 28 GPS On...........................31, 33, 41
Max Speed....................4, 9, 12, 14
Trip Meter......................................7
Trip Meter Data Options.................14
Trip Meter Defaults........................14
Trip Meter Page ...................8, 13-14
Trip Odometer................4, 9, 12, 14
Trip Time.......................4, 9, 12, 14
A
S
About Option................................31
Accessories...................................47
Accuracy........................4, 9, 12, 14
Adjusting the Display...............31, 34
Advanced Options ..............31, 37-38
Alerts..........................................39
Average Speed...............4, 9, 12, 14
Auto Zoom Option.........................10
Satellites...............8, 31, 33, 39, 41
Search Option, Waypoints........16, 30
Select Option
N
Nav Data Page ....................8, 15-30
Navigate Option
Waypoints..........................16, 18
Track .......................................19
Waypoint ................................16
Service........................................44
Set Data Option
GoTo..................................16, 18
Track .................................19, 20
Route ................................21, 25
Navigation.................................1, 7
New Option
U
Units of Measurement.............31, 36
Using the Advanced Screen .......37-38
Using the Settings Screen .........35-36
Deleting Individual Waypoints...26, 27
Map ..........................................9
Gauges ....................................12
Trip..........................................14
Settings Option ................31, 35, 36
Sort Option, Waypoints............16, 30
Sort & Search........................16, 30
Sounds..................................31, 36
Spanish Manual............................A1
Specifications...............................43
Speed...........................4, 9, 12, 14
Status Bar ...................................32
Stop Navigation
H
Destination....................4, 9, 12, 14
Hiker Icons ..................................15
B
Details Option
Route............................21, 22-23
Waypoints..........................16, 17
North Reference ...............31, 38, 42
North Up .......................................9
Backlight...............A2, 4, 31, 32, 34
Basic Operation............................5-7
Batteries .....................5, 32, 39, 43
Battery Save Mode.............6, 31, 38
Bearing...................4, 9, 11, 12, 14
Buttons
I
W
Map .......................................10
Important Information....................A1
WAAS ...................................31, 42
Warnings and Cautions ............A1, 39
Warranty.....................................47
Waypoint Shortcut..............6, 16, 17
Waypoints ..............7, 15-18, 26, 27
WGS 84......................................37
Winter Time.................................36
Route .....................................21
Inserting a Waypoint into
Display Option........................31, 34
a Route........................21, 23, 24
Dutch Manual...............................A1
Installing Batteries ..........................5
O
E
Interference .................................41
Odometer......................4, 9, 12, 14
Order Form..................................48
Orientation Option ..........................9
Editing Text..................................29
Enter....................................A2, 6
Page....................................A2, 5
Power..................................A2, 5
Zoom In/ Out........................A2, 5
Italian Manual..............................A1
Edit Option, Route .......................21
L
Elevation.......................4, 9, 12, 14
Language ..............................31, 36
Enter Button ...........................A2, 6
Location........................4, 9, 12, 14
Errors..........................................41
Location Screen......................31, 33
ETA...............................4, 9, 12, 14
Log Option, Tracks ........................19
P
Z
Page Button.............................A2, 5
Pointer Options.............................11
Portuguese Manual .......................A1
Position Format......................31, 38
Power...........................4, 9, 12, 14
Power Button.......................A2, 5, 6
Power On/ Off ...............................6
Powersaver Mode...............6, 31, 33
Zoom In/ Out Button.................A2, 5
Map ........................................10
Gauges ....................................12
Trip..........................................14
Stop Receiving.............8, 33, 39, 41
Summer Time ........................31, 36
Swedish Manual ...........................A1
System Page .....................8, 31--38
C
Zoom Option................................10
Cautions and Warnings ............A1, 39
Clock Format .........................31, 35
Compass ..................11, 31, 37, 38
Contrast ................................31, 34
Course.........................................11
Create New Route .............21, 22-23
Customer Service..............A1, 44, 47
F
Lost Satellites ....................8, 39, 41
Factory Service.............................44
Low Battery...........................32, 39
FCC Compliance Statement............ A1
M
Features ......................................A3
Maintenance ..............................44
Five Main Pages.............................8
Map Data Option ..........................9
Font Size Option, Trip Meter...........13
Map Datum .....................31, 37, 42
French Manual..............................A1
Map defaults................................10
Full Map........................................9
Map detail Option.........................10
T
R
Time.......................4, 9, 12, 14, 32
Time Zones................31, 35, 36, 40
Track......................7, 19-20, 26, 28
Track Log ..............................19, 39
Track Up........................................9
D
Reset Option, Trip Meter ................13
Remove Waypoint from Route..21, 23
Route...........................7, 21-25, 26
Data Fields Descriptions...................4
Date.......................4, 9, 12, 14, 32
Daylight Saving Time ..............31, 36
Default Option
G
Map Display...................................9
Gauges Data Option......................12
Map Orientation .............................9
Gauges Defaults ...........................12
Map Page.............................8, 9-10
Download from Www.Somanuals.com. All Manuals Search And Download.
45
46
A C C E S S O R I E S
•
W A R R A N T Y
•
D O C
8
Optional Accessories
Declaration of Conformity
You can find fine accessories at your local Cobra Electronics
Corporation™ dealer, or in the U.S.A. you can order directly
from Cobra Electronics Corporation™.
Hereby, Cobra Electronics Corporation™, declares that this
Global Positioning System Receiver is in compliance with the
essential requirements and other relevant provisions of
Directive 1999/ 5/ EC.
To order by phone in the U.S.A.
Call 773.889.3087 (Press 1 from the main menu
8 a.m.-6 p.m. M-F CST. )
To order by mail or fax in the U.S.A.
Call 773.889.3087 for pricing and availability. Please fill
out order form on next page, and mail/ fax directly to Cobra
Electronics Corporation™. Fax: 773.622.2269
To order online Go to www.cobra.com
Cobra Electronics Corporation™
6500 West Cortland Street
Chicago, Illinois 60707 USA
www.cobra.com
Exclusions: This limited warranty does not apply; 1) to any
product damaged by accident; 2) in the event of misuse or
abuse of the product or as a result of unauthorized alterations
or repairs; 3) if the serial number has been altered, defaced
or removed; 4) if the owner of the product resides outside
the U.S.A.
COBRA ELECTRONICS CORPORATION™
warrants that its GPS 100 S, and the component parts
thereof, will be free of defects in workmanship and materials
for period of one (1) year from the date of first consumer
purchase. This warranty may be enforced by the first consumer
purchaser, provided that the product is utilized within the U.S.A.
All implied warranties, including warranties of merchantability
and fitness for a particular purpose are limited in duration to
the length of this warranty.
Cobra Electronics Corporation™ will, without charge, repair or
replace, at its option, defective GPS 100 S, products or com-
ponent parts upon delivery to the Cobra Factory Service
Department, accompanied by proof of the date of first
consumer purchase, such as a duplicated copy of a sales
receipt.
Cobra Electronics Corporation™ shall not be liable for any
incidental, consequential or other damages; including,
without limitation, damages resulting from loss of use
or cost of installation.
You must pay any initial shipping charges required to ship
the product for warranty service, but the return charges will
be at Cobra Electronics Corporation™'s expense, if the product
is repaired or replaced under warranty.
Some states do not allow limitations on how long an implied
warranty lasts and/ or do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitations
may not apply to you.
This warranty gives you specific rights, and you may also
have other rights which vary from state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
|