INSTRUCTION MANUAL
Stand-Alone 8 & 16Channel
DIGITAL VIDEO RECORDER
MODEL DV0890, DV1690
Ver. 010313
Copyright © 2011 Clover Electronics U.S.A. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Warning
Check if the power is switched off before installation. Check if the power is switched off before installation
Don’t plug in at the same time. Otherwise it may be or additional repair. Never plug in while the device is
set on fire or put you at the risk of electrocution or in operation. Otherwise it might be set on fire or put
damage.
you at the risk of fire, electrocution and damage.
Keep the cables at least 15 centimeters away from Never uplift the cover, break down, repair and
the wall and at least five centimeters away from the maintain at your disposal. Otherwise it might put
side so that the cables, including power line and you at the risk of fire, electrocution and damage.
video cable, may not be disfigured. Otherwise it
might put you at the risk of fire, electrocution and
damage.
.
Keep the device environment always clean before Input voltage of the device should come within the
and after installation of the device. Use dry cloth to range of 10 percent of specified voltage. Use
clean the device. Never use any organic solvent. separate wall power to keep heating appliances,
Otherwise it might be the cause of electrocution or including hair dryer, iron and refrigerator. Otherwise
mechanic disorder.
it might be the cause of fire and electrocution.
When strange noise or smell is sensed, immediately Do not install device in humid place filled with dust.
plug out and send inquiry to service center or seller. It might be the cause of electrocution and fire.
DIGITAL VIDEO RECODER MANUAL
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Caution
Do not install the device in any place where strong Do not put anything heavy on the product.
magnetic flow, electric wavelength and vibration may Otherwise it may be the cause of disorder.
be sensed or where radio, TV or other wireless
device is located. Keep the device away from
magnetic flow, electric wave or vibration.
Strong shockwave or vibration may be the cause of Be careful so that anything conductive may not fall
mechanic disorder. Please be careful.
into the ventilation hole. Otherwise it may be the
cause of disorder.
Check if power switch and record on the front side When HDD is overloaded, you change the setting to
of the product is still turned on.
keep recording. In that case, check again if it would
be OK to eliminate the saved data.
When HDD saving data gets old enough, video data When any abnormal sign is detected,
to be saved may suffer so much damage that it may
be irreparable. If screen appears broken while
regenerating data saved in HDD, it means HDD
won’t work any longer. Immediately contact service
center to replace them.
immediately contact seller or service center.
DIGITAL VIDEO RECODER MANUAL
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
TABLE OF CONTENTS
1. Summary
∙ Feature ……………………………………………………………………………………………….………………………..……………….8
2. Installation
∙ Contents ………………………………..…………………………………………………………………….…………………………………..9
∙ Front panel ………………………………………………………………………………………………………………………..……….….10
∙ Rear panel.………………………………………………………………………………………………………………………………………11
3. System Operation
∙ Icon………………………………………………………………………………………………………………………………………..…..…..…12
∙ Remote Controller…………………………………………………………………………….………………………………………..…..14
∙ How to setup the remote controller ID ………………………………………………………………………………..….…..15
4. System configuration
∙ System..……………………………………………………………………………………………………………………….……..……..…….16
∙ Time/Date………………….……………………………………………………………………………….……………………………..……17
∙ Password………………..……………………………………………………………………………………………..…………………..…….18
∙ Hard Disk…………………………….……………………………………………………………………………………………..……..…….19
∙ Default Setup………………..…………………………………………………………………………………………………....…….…….20
∙ Upgrade……..………………………………………………………………………………………………………………………..………....20
∙ BUTTON SETUP………..…………………………………………………………………………………..………………………….….……21
∙ RS-485……………………………..……………………………………………………………………………..……….………………….…….22
5. Display
∙ OSD……………………………………………………............................................. ……………....................................................….22
∙ SPLIT MODE……………………………………............................................. ……………....................................................….23
∙ Auto Sequence..…….………………..…………………………………………………………………………….……..…..…………….25
∙ TV Adjustment…………..………………………………………………………………………………………………...………..…..……26
6. Network Setup
∙ IP Address……….………………..………………………………………………………………….………………………………………….26
∙ Notification….………………..………………………………………………………………….………………………………………….27
∙ Selecting E-mail Notification…………………………………………………………….………………………………………….28
∙ Web Server………………………..………………………………………………………………………………………….………………….29
∙ Free DDNS………………………..………………………………………………………………………………………….………………….29
∙ Dual Codec Setup…………..………………………………………………………………………………………….………………….35
DIGITAL VIDEO RECODER MANUAL
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
7. Camera Setup
∙ Camera ……………….………………………………………………………………………..…………………………………..…………..…36
∙ Camera Title……….………………………………………………………………………..…………………………………..…………..…36
∙ PTZ Setting………….….……………………….………………………………………………………………………………………...……37
∙ How to use PAN/TILT….….……………………….………………………………………………………………………………...……39
8. Record
∙ Record Setup…………………………..……….……………………………………………………………………….…………………….41
∙ Schedule Record..……………………..……….…………………………………………………………….………….………………….42
∙ Holiday Record..…...…………………………..……….…………………………………………………………….………….………….43
9. Event Setup
∙ sensor…………………..………..…………………………………………………………………………………….…….……………………44
∙ Motion Detection.…………..…..……………………………………………………………………….……………………..……..……44
∙ Camera Temper Detection...……………….…………………………………………………………..……..…………………..……47
∙ Event Action……..………………..…………………………………………………………………………………………………….……..47
10. Search
∙ Search…………..…………………………….………………………………………………………….………………………………..……49
∙ DATA / TIME Search……………..……………..………………………………………………………………….………………………51
∙ Event Search...…………………………………....……………………………………………………………………..……………….……51
∙ Go to First / Go to Last…..………………………………………………………………………………………….………………..…52
∙ Search Control…………………………….……….……………………………………………………………………….……………......52
∙ Audio ……………….………………………..….………….…….……………………………………………………………..…………......53
11. Backup
∙ Backup…………………………………………………..…………………………………………………………………………………………54
12. Remote Connection-iPhone………………………………………………………………………………………………………..59
13. Windows Mobile Viewer……………………………………………………………………………………………………………….68
14. Remote Connection-Android Phone…………………………………………………………………………………………..76
15 Appendix
∙ Specification ………………………..……………………………………………………………………………….……………....………86
DIGITAL VIDEO RECODER MANUAL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
1 — Summary
Feature
This Stand Alone Digital Video Recorder is capable of high quality of video and audio data
recording and provides various ways of data search by Calendar, Date/Time and event. Also the
system allows remote user to access in order to monitor and control multiple local DVRs via
TCP/IP / LAN connection.
Main features
(1) High resolution live display
(2) Easy installation and operation
(3) Motion detection record
(4) Sensor and Alarm outputs
(5) Reserved recording (Motion, Sensor/Alarm and time selected record)
(6) Network control via Dynamic IP
(7) NTSC / PAL compatible
(8) Highest data compression of H.264 technology
(9) Data backup to USB memory stick
Application
(1) Bank, ATM unit, Supermarket, Convenient store and other public places.
(2) Private homes, Apartment, Jewelry shop, Commercial compound and other places where
it needs anti theft surveillance system.
(3) Warehouse, Production line and other places where evidence is needed after any event
happened and to analyze the situation.
(4) Where to monitor sites remotely
DIGITAL VIDEO RECODER MANUAL
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
2 — Installation
Contents
HDD fixing screw (8PCS)
Battery for
remote
Program CD
controller
Size : AAA
1.5V X 2EA
MANUAL
Power
Adapter
POWER
CODE
Remote
controller
Accessories.
ㆍ Digital Video Recorder (1EA)
ㆍ HDD Fixing screw (8pcs)
ㆍ Program CD (1EA)
ㆍ Manual (1EA)
ㆍ Power code (1EA)
ㆍ Remote controller)
ㆍ Battery AAA (1.5V 2EA)
ㆍ Adaptor (1EA)
[Note] Check the accessories before use.
DIGITAL VIDEO RECODER MANUAL
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Front panel
(DV0890)
[1] POWER LED [2] RECORD LED [3] MENU Button [4] QUAD Button
[5] REC Button (Emergency / Schedule) [6] USB Port
(DV1690)
[1] POWER LED [2] RECORD LED [3] USB Port [4] MENU Button
[5] QUAD Button
[6] REC Button (Emergency / Schedule)
DIGITAL VIDEO RECODER MANUAL
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Rear panel
(4Ch DVR)
(8Ch DVR)
(16Ch DVR)
DIGITAL VIDEO RECODER MANUAL
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[1] AUDIO OUTPUT
[2] AUDIO INPUT
[3] VIDEO INPUT
[4] VIDEO OUTPUT (COMPOSITE)
[5] VGA OUTPUT
[6] ETHERNET PORT (RJ-45)
[7] USB PORT (USB Drive / Mouse)
[8] RS-485/ALARM/SENSOR
[9] POWER (ADAPTER)
3 — System Operation
Icon
[1] The icons on the live screen indicate the status.
DIGITAL VIDEO RECODER MANUAL
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] Camera title will be shown as above.
[3] Recording Status Icon
Recording.
Video Loss.
Motion Detection.
Sensor.
DIGITAL VIDEO RECODER MANUAL
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[4] Status Bar
1. Date / Time
2. Record mode : Emergency recording - “ER”, Scheduled recording - “SR”.
3. Key Lock / Network Connectivity status.
4. Hard Disk status.
Remote Controller
[1] ID (Remote controller ID) : Press to select a remote controller ID in case of using one remote
controller to multi DVRs.
[2] SPLIT : Press to see split mode. Once press “▲” button, split mode can be changed and
press “▶” button to change channel group.
[3] BACKUP : Press to start recorded data archiving to external media.
[4] AUDIO : Select a audio channel.
DIGITAL VIDEO RECODER MANUAL
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[5] SEQ (Sequence) : Press to display each camera in sequence for specific duration.
[6] PTZ : Call PTZ control menu.
[7] SEARCH : Call search menu to playback recording image.
[8] CHANNEL / NUMERIC BUTTON : Input the channel number to make full screen mode or the
number in setup menu.
[9] SETUP : Press to call setup menu
[10] DIRECTION KEY / CONFIRM BUTTON / PLAYBACK CONTROL
[11] REC : Select recording mode.
How to setup the remote controller ID
In order to use remote controller, the ID must be same both DVR and remote controller. By
assigning DVR ID, it allows the user to control multiple DVRs with one remote controller.
[1] Check current system ID and can be changed by user. (Factory default ID: “0”)
Menu > System > Information > Remote ID (Range: 0 ~ 99 )
System ID must be configured on DVR system menu. It cannot change DVR system
on remote controller.
DIGITAL VIDEO RECODER MANUAL
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] How to use remote controller
ID must be identified between remote controller and system. Otherwise remote controller
cannot recognize DVR correctly.
[3] Remote controller ID menu displays as above image when you click ID button of remote
controller.
∙ Remote ID : It displays current ID of the system.
∙ “00” : Input the same ID number of DVR and press “Confirm”
4 — System configuration
System
[1] Remote ID : Assign the ID of remote controller, so that user can separately control multiple
DVR unit with one controller. (ID range: 0 ~ 99)
[2] Mouse Resolution : Mouse sensitivity level can be adjusted at user’s convenience.
(Basic Level 1; Slow speed, Level 1 < Level 2 < Level 3 to increase reaction speed.)
DIGITAL VIDEO RECODER MANUAL
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[3] Language : Select a language
[4] Version : To show H/W Version and S/W Version
[5] Health: Indicates storage status
• HardDisk1 : Temperature of HDD.
• Front USB : Temperature of external storage with front USB port.
• Rear USB : Temperature of external storage with rear USB port.
[6] Video Detect Mode : Select a video signal format. (NTSC / PAL)
[7] Video Mode : Display video signal format
[8] WEB Code : DDNS ID for DDNS connection.
[9] MAC Address
Time/Date
[1] Time : Set the time.
[2] Date : Set the date.
DIGITAL VIDEO RECODER MANUAL
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[3] Date Format : Select a Time / Date display format.
[4] Daylight Saving Time : It is commonly called as “Summer time”. During the period,
user can change system time 1 hour early or late.
[5] Time Server : It helps time set of DVR automatically by synchronization of time server service.
• Time server : Input the URL of server (Default : kr.pool.ntp.org )
• Synchronize Period : Select the period to syncronize between DVR and time server
ㅇ Power On : Try to sync once power on.
ㅇ 12Hour : Try to sync every 12 hours.
ㅇ 24Hour : Try to sync every 24 hours.
ㅇ Off : Disable to sync.
[6] Time Zone : Select a GMT zone.
[7] Apply : Save and apply time / date setting.
Password
(Channel display could be different per model 4ch/8ch/16ch)
[1] ID : ID : Able to input max. 8 user’s account. (“Admin” and “User1~7“)
[2] Password : Input the new P/W for the selected ID. (Max. 8 digit)
[Note] Default password of all ID is “11111111”.
DIGITAL VIDEO RECODER MANUAL
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[3] Function : Assign user’s function on each account.
ㅇ Configuration
ㅇ HardDisk
ㅇ Search
ㅇ Backup
ㅇ PTZ Setting
ㅇ Record Key
ㅇ Camera
Hard Disk
It is the HDD and ODD setup. Since it is closely related to the record, if the setup is wrong, it may
cause the mal functioning.
[1] Hard Disk List : It shows the HDD information
ㅇ Hard Disk1 : Capacity of hard disk drive
ㅇ Front USB : Capacity of external drive on front USB port.
ㅇ Rear USB : Capacity of external drive on rear USB port.
ㅇ Erase Data : Format the disk.
[2] Total : Display total capacity of HDD ( Used size / Available size )
[3] Erase Data : Delete a recording date on selected disk.
[4] Auto delete : The function is to keep recorded data in HDD during only for specified period.
(Range: 1~120days)
[5] Advanced : Select a purpose of each device among “Main Disk”, “Mirror Disk”, “RW Write”
then “Apply” to reboot system.
DIGITAL VIDEO RECODER MANUAL
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[NOTE] “Mirro Disk” or “RW Writer” purpose is able to setup when the external device is
connected with DVR via USB port.
Default Setup
[1] Default Setup : Except major configuration (Network, Password), parameters are initialized.
[2] Factory Setup : All parameters are initialized.
Upgrade
[1] USB
In order to upgrade system firmware with USB memory stick, the firmware file must be saved in
the USB storage first and then insert to DVR to start USB upgrade from the menu.
DIGITAL VIDEO RECODER MANUAL
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Firmware
USB Memory Stick
[NOTE] Do not turn off power or remove USB stick while the upgrade is in progress.
[2] Configuration Backup : Save a configuration file of DVR.
[3] Configuration Load : Upload a configuration file to DVR.
Button Setup
• Auto key lock : There is no key input during specific time, system locks the button automatically.
In order to unlock, input the password. ( 10 sec. 30 sec. 1 min. OFF)
• Key Beep : If you select ON, beep sound occurs
DIGITAL VIDEO RECODER MANUAL
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
RS-485
In order to control the PTZ camera or control keyboard, DVR supports RS-485 port.
√ Baudrate /Parity /Stopbit : For using RS-485 port, refer to the manual of “Keyboard” or “PTZ
camera”.
5 — DISPLAY
OSD
DIGITAL VIDEO RECODER MANUAL
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[1] Camera Title : ON / OFF
[2] Status Bar : ON / OFF.
[3] Multi screen Border : ON / OFF
[4] Login Display : Select a login option
• As Per Last Login : Display live image after system rebooting.
• Cover All Camera : Do not display live image after system rebooting.
[5] Log in menu : Select a log in option.
• Always from boot : Input the password after rebooting.
• Boot after lock : Auto login after rebooting.
[6] Alphablending : Select the transparency level of menu background.
SPLIT MODE
Channel can be switched into another by selecting split mode or a channel.
Channel display can be different per each model
[4 Split]
Displayed in 4/8/16ch
DIGITAL VIDEO RECODER MANUAL
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[6 Split]
Displayed in 8/16
[9 Split]
Displayed in 8/16ch
.
[13 Split]
Displayed in 16ch
DIGITAL VIDEO RECODER MANUAL
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[16 Split]
Displayed in 16
[Note]
Various split screen switch
If you press UP direction key in live mode, the split mode is changed. And if you press the RIGHT
direction key, the split group is changed. (There is 1ch full screen and 4 split in 4ch DVR.)
Auto Sequence
• Auto Loss Skip : If there is no video input, it skip video loss channel.
• Display time : Select a display duration while sequencing (1 sec. ~30 sec.)
DIGITAL VIDEO RECODER MANUAL
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
TV Adjustment
[1] Monitor : Output is fixed with 4:3 ratio.
[2] Icon : Change the icon position.
• Small : When using small monitor.
• NORMAL : When using normal monitor
• VGA : When using the monitor for VGA
6 — NETWORK SETUP
IP Address
It is the system setup for remote monitoring or backup and it needs the network setup of DVR.
The user must know whether their internet is dynamic IP(DHCP) or fixed IP. Please check it to your
ISP before setup.
[1] DHCP : “ON” for dynamic IP user.
“OFF” for static IP user.
DIGITAL VIDEO RECODER MANUAL
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] IP Address : Input the IP address.
[Example]
• IP address : 61.250.152.050
• Subnet Mask : 255.255.255.000
• Gateway : 61.250.152.001
• DNS Address : 164.124.101.002
[3] DDNS Address : Do not change the DDNS server IP (61.250.157.14)
[4] Use Port : Default port is 3000.
[5] Upnp : If a router supports Upnp, it automatically set port forwarding.
[NOTE] In case of using the router, the user should make port forwarding.
The port forwarding function is described on the router manual.
Notification
When an event is triggered, it is notified to the user.
E-Mail Setup
It’s a basic setup to send E-mail, so if it is not correct, e-mail couldn’t be delivered. So be careful
to make Setup correctly.
DIGITAL VIDEO RECODER MANUAL
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[1] SMTP SERVER : Designating the mail server sending a mail. Input the mail server address a
user uses.
[2] Use Port : Mostly 25 is used to a mail server. Check the port when it doesn’t work after Setup.
[3] Mail Address : Input the e-mail address of receipts (Available up to max 3 people)
[4] Password : When sending an e-mail in case ID & password input are necessary, set the ID &
password.
Selecting E-mail Notification
Select which type of notifications you are going to use.
Notification type : You can select the type for E-mail notification.
• Alarm : E-mail is sent with still image when an alarm occurs
• Sensor : E-mail is sent with still image when triggering a sensor
• Motion Detection : E-mail is sent with still image when detecting a motion.
• Video Loss : E-mail is sent when video input is lost.
• Power On : E-mail is sent when power is on after off.
• Password Modify : E-mail is sent when the system password is modified
• HDD Error : E-mail is sent when HDD error happens
DIGITAL VIDEO RECODER MANUAL
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Web Server
Built-in web server make user can connect the DVR remotely on the Internet Explorer.
[1] ON/OFF : Select ‘ON’ to use remote N/W connection through web.
[2] USE PORT : Port for remote connection.
[Example]
input of browser.
Free DDNS
Free DDNS is used for remote connection through private DDNS service.
a router, you must make DMZ setting in the router setup for the IP your system has.
DMZ is a function to open all the ports for the selected IP.
For example, here is the way how to create an account with the name of hongkildong.
DIGITAL VIDEO RECODER MANUAL
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] After creating sub domain name(example:dvr-sample), select the main domain name
using with free. A user can select any domain name convenient to oneself. Then, click the
“ADD” button.
[3] Then, input the detailed user information. After filling in user name, password and e-
mail address, etc., then click “Create Account” button. For e-mail verification, receivable e-
mail address is required.
DIGITAL VIDEO RECODER MANUAL
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[4] When you see that the e-mail has been sent to you for verification, then check the
e-mail.
[5] After opening the verification e-mail, if you click the linked part, the verification is
proceeded automatically.
DIGITAL VIDEO RECODER MANUAL
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[6] If the e-mail verification is completed, you are entered into following website.
[7] After log-in, click “My Zones/Domains” in “My Service” menu
[8] Then, click “Dynamic DNS Hosts” in the menu on the left.
DIGITAL VIDEO RECODER MANUAL
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[9] Click the firstly registered domain(dvr-sample.dyndns-ip.com)
[10] Input the public IP of installed router for IP Address. You can find the public IP
of the router when you check the router setup. When you complete the input, click
“Save Changes”.
[11] To activate the registered domain, click “Checkout to Activate.”
DIGITAL VIDEO RECODER MANUAL
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[12] Then, click “Proceed to checkout” button below.
[13] And click “Activate Services” below.
[14] Then, selected domain IP is activated.
[15] Input registered information in DVR setup.
• DDNS address : Select the private DNS service name (Select DyDns )
• User name/ Password/ DVR Address : After creating an account in the relevant
website, input the ID/ Password/ URL information allocated to DVR setup.
DIGITAL VIDEO RECODER MANUAL
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[16] If you input the registered domain in URL address of web browser, then the
connection is made.
Note : After making new account, the relevant service would be available after
10~30 minutes
Dual Codec Setup
It is a transmitting function through the extra network transmitting Codec.
• On/ Off : If you want to use it, set ON.
• Channel : Select the channel to set (Available to set per channel)
• Quality : Select the picture quality to transmit
• Speed : Select the frame to transmit
• Total Rec Framerate : Available to allocate per channel within 120FPS (total transmitting speed)
DIGITAL VIDEO RECODER MANUAL
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
7 — Camera Setup
Camera
• Channel : Select the channel to set
• On/Off : Select whether you use the channel or not
• Brightness / Contrast / Saturation / Hue : Adjust the image of the selected (Default : 50%)
Camera Title
Input a camera title
Multi-language keyboard is supported
DIGITAL VIDEO RECODER MANUAL
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
PTZ Setting
[1] Channel: Select a channel
[2] ON/OFF : Enable or disable to use PTZ.
[3] MODEL : Select the PTZ protocol or, model
[4] ID : Select the PTZ ID. (For more detail, refer to the manual of PTZ device.)
Advanced
[1] Reverse Control (Pan) : Set the Pan works reverse direction.
[2] Reverse Control (Tilt) : Set the Tilt works reverse direction.
[3] Touring Mode
• Preset Touring : Use touring by DVR setting.
• Camera Touring : Use touring by camera setting. (PTZ camera built-in touring function is
available only.)
DIGITAL VIDEO RECODER MANUAL
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[4] Setup Preset Touring
It is operable when you select the ‘preset touring’ from the touring mode’ menu.
The touring number is selectable 1~16.
[1] Touring number : Select the number.
[2] Preset number : Select the preset number saved before.
[3] Touring interval (/SEC) : Select the touring dwell time.
[NOTE] PTZ protocol selection
Protocol is PTZ moving driver. The protocol is registered as per the camera model name or
protocol name. Please check whether you PTZ is usable for this DVR. The touring is
supporting when the camera itself support the touring function.
DIGITAL VIDEO RECODER MANUAL
37
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
How to use PAN/TILT
How to call the PTZ menu recall
• Mouse menu: Click the right button of mouse and select the ‘PTZ’.
• Remote controller menu: Click the “PTZ” from remote controller.
(1) Select PTZ Button on the remote controller
• When you select PTZ button, + shape icon appear. Then move to the channel you want by the
direction key.
(2) If you moved to PTZ channel, then after pushing “SET UP” button, select the menu to
operate.
DIGITAL VIDEO RECODER MANUAL
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[ PTZ control menu ]
ㅇ PanTilt : Control the direction by the direction key in remote controller.
ㅇ PRESET = Input the preset number to be moved or saved and select this menu.
(Preset moving)
(Preset saving)
ㅇ Tour : It tours as per the saved preset number.
ㅇ MENU : It can recalls the PTZ camera OSD menu
ㅇ Channel: It is for changing the PTZ channel from the multi channel viewing. Once you
select the ‘CHANNEL’ menu, select the channel to apply the PTZ by moving the direction
key and, if you click the CHANNEL again, the PTZ applied channel selection is
completed( It applies only on multi split channel)
ㅇ AutoFocus : Adjust the focus automatically
ㅇ Exit : Escaping the PTZ mode
DIGITAL VIDEO RECODER MANUAL
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
8 — Record
Record setup
The record setup can be made as per the different channel such as different record frame and
resolution etc.
Since the file size is different from the record setup, you have to be careful when you make
setup.
(Channel display could be different per model 4ch/8ch/16ch)
[1] Channel : It selects the channel.
[2] ON/OFF : It selects the RECORD ON/OFF of each channel.
[3] Resolution : It selects the resolution selection.
[4] Quality : It selects the record picture quality. ( HIGHEST > HIGH > NORMAL > LOW > LOWEST)
[5] Speed : It selects the record frame.
[6] Post-Recording : It selects how long will be the record made after the event happen.
[7] Audio Out : It selects the audio out ON/OFF.
[8] Total Frame rate : It shows the sum of record frame on each channel
DIGITAL VIDEO RECODER MANUAL
40
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Schedule Record
For schedule recording, it can be setup as per the day/date/time and channel.
The record schedule can be setup by an hour.
N : No record
C : Continuous record
M : Motion detected record
S : Sensor triigered record
M+S : Motion or sensor record
[How to setup]
• Select the channel.
• Once you select the day and time, whenever press “Confirm” button, event color is changed in
this order. ( N-> C -. M -> S -> M+S )
• After select the other date or time and press “Confirm”, event color changes.
• Clear : It clears the current date setup.
• Channel copy: Copy the current record setup to the selected channel.
( Escape it by pressing “SETUP” button)
• All channel copy : It copies the current record schedule to all channel.
DIGITAL VIDEO RECODER MANUAL
41
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Holiday Record
Different record can be applied as per different holiday.
[1] 7 different holiday setup can be made.
After selecting the recording type from H1 ~ H7, set by mouse dragging or direction key of
remote controller
[2] Select the Holiday from the menu and select the holiday type from H1~H7.
Once you click the date, every times you click, the holiday color will be changed, which means the
different record setup.
DIGITAL VIDEO RECODER MANUAL
42
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
9 — Event Setup
Sensor
It is for sensor setup.
(Channel display could be different per model 4ch/8ch/16ch)
[1] Sensor Input : Select the sensor input channel.
[2] On/Off : Select the sensor usage.
[3] Input Type: Select the sensor input type.
• N/Open (NORMAL OPEN) : The contact is normally opened but closed when the signal is
generated.
• N/Close (NORMAL CLOSE) : The contact is normally closed but opend when the signal is
generated.
[4] Related camera: Select the camera to be related with sensor. Multi-selection is possible.
Motion Detection
It is the motion detection setup menu.
DIGITAL VIDEO RECODER MANUAL
43
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
▷ Channel : Select the motion detection channel.
▷ On/Off : Select the motion detection usage.
▷ Sensitivity : Select the sensitivity of motion detection. Please apply it after the actual testing.
▷ Detection Area: Select the motion detection area. ( 1~5 )
The cursor moving by the direction key and if press “enter”, this block is designated for motion
detection.
• MD selected area : Pink color
• MD non-selected area : Transparent
• If the movement is detected, the color of that area turns green.
[ Apply to all ] If you use the following key, you can apply or release in one button
“No1” button: Release all
“No 2” button: Select all.
DIGITAL VIDEO RECODER MANUAL
44
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[Using mouse]
Locate the pointer on start point and click the right button then dragging to the ending point.
CAMERA TEMPER DETECTION
If there is the extra ordinary bright or, dark, it recognize as an event.
If it turns bright by opening the door/window or if somebody painted the camera, it detects as an
event.
( This function is operating by using the dual monitor and output is made through VGA)
[1] Channel : Select the channel to use.
[2] White Detection : Detecting the brightening.
[3] White Sensitivity : Detecting the sensitivity of brightening.
[4] Black Detection : Detecting the darkness
[5] Black Sensitivity : Detecting the sensitivity of darkness.
EVENT ACTION
Event record will be made as per the setup.
DIGITAL VIDEO RECODER MANUAL
45
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[1] Motion : It is the setup for PTZ, pop-up, relay out, buzzer in motion detection
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.
[2] Sensor : It is the setup for PTZ, pop-up, relay out, buzzer in sensor triggering.
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.
DIGITAL VIDEO RECODER MANUAL
46
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[3] Video loss : It is the setup for PTZ, pop-up, relay out, buzzer in video loss.
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.
[4] Black Detection : It is the setup for PTZ, pop-up, relay out, buzzer in Black Detection evnt.
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.
[5] white Detection : It is the setup for PTZ, pop-up, relay out, buzzer in white Detection event.
• Channel : Select the channel to apply.
• Preset channel : Select the preset camera being applied for the event.
• Preset number : Select the preset number to move.
• Popup Channel : Select the usage Popup usage by ON/OFF.
• Popup Duration : Popup window floating time.
• Relay out : Select the alarm out
• Relay duration : Relay out duration.
• Internal buzzer : Internal buzzer usage.
DIGITAL VIDEO RECODER MANUAL
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
10 — SEARCH
Search
It supports the various ways of search mode such as Calendar, Date/Time, Event, etc.
[1] How to call menu : Select the “SEARCH” from remote controller and right button of mouse.
[2] Search mode selection
· Calendar search: It searches by calendar.
· Date /Time search: It searches specific Date/Time.
· Event search: It searches as per the event.
· Go to first : It searches the first recorded data on HDD.
· Go to last : It searches the last recorded data on HDD.
Calendar search
It searches using by the calendar.
[1] If there is the recorded data on DVR, it shows red color on recorded date. Using the direction
key, you can change the YEAR/MONTH/DATE.
DIGITAL VIDEO RECODER MANUAL
48
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] If there is the recorded data, it shows red color so, press the enter button on selected
date.
(Channel display could be different per model 4ch/8ch/16ch)
[3] The recorded data shows as a graph and select the minutes to search.
(Channel display could be different per model 4ch/8ch/16ch)
DIGITAL VIDEO RECODER MANUAL
49
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Date/Time search
If you know the specific date/ Time, input the time to search.
[1] Record begin : It shows the record began time.
[2] Record end : It shows the record end time.
[3] Channel : Select the channel to search.
[4] Play Begin : Input the time to search.
[5] Play : If you click “Play”, it playback the selected time.
Event search
It searches event recorded data.
(Channel display could be different per model 4ch/8ch/16ch)
[1] Select the disk to search
[2] Day : Select the day to search.
[3] Channel : Select the channel to search.
[4] Event Type : Select the type of event(MD/Sensor/Video Loss / System/all).
[5] Search : If you click “Search”, it shows the event list and if you click, it playback the relevant
image.
DIGITAL VIDEO RECODER MANUAL
50
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[6] If you select the event list from above, it shows playback.
Go to first / Go to last
It searches the first or last recorded image.
Search control
Description of search button
[1] X1 playback
[2] Pause
[3] Stop
[4] Reverse playback
[5] Playback speed control
[6] Reverse playback speed control
[7] Audio during playback
[8] Calendar search during playback
[9] Mark In-Mark Out : If you click it during playback, it recognizes as a backup start time and if
DIGITAL VIDEO RECODER MANUAL
51
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
you click it once again, it recognizes as a backup end time. After this, it moves to the backup
menu automatically.
[10] Screen magnifying function in the full screen. (Use Emergency recording button on the
remote controller.)
Audio
Audio can be listened in Live or Search.
[1] Menu recall : If you select the “AUDIO” during the live or playback, the audio out menu show
up. The menu call is possible by remote controller or mouse.
[2] Mode selection
• OFF : No audio use.
• CH1 : Audio out only from CH1
• CH2 : Audio out only from CH2
• CH3 : Audio out only from CH3
• CH4 : Audio out only from CH4
• Auto : Only selected channel audio out.
• Volume control : If the length of bar increase, the volume louder.
DIGITAL VIDEO RECODER MANUAL
52
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
11 — Backup
Backup
Selected image can be backup to the external device(USB). Connect the USB pen drive to the DVR
and select ‘BACKUP’ button from remote controller or, click the right button of mouse.
[1] Select the recognized backup device. If it recognized normal, it shows the device capacity
such as ”XXX MB”.
[2] Select the date from Calendar.
DIGITAL VIDEO RECODER MANUAL
53
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[3] Select the time by double click.
(Channel display could be different per model 4ch/8ch/16ch)
[4] Select the minute. Once you select “--------“, the time will be automatically input.
(Channel display could be different per model 4ch/8ch/16ch)
[5] Backup end time selection
• If the backup end time is the same hour, select the minute and click, “-------“, the time
will be automatically input.
•
If the backup end time is the different hour, go back to the previous menu by right
button of mouse or, “MENU” button. Then, select the hour/minutes and click “-------“
for automatic time input.
DIGITAL VIDEO RECODER MANUAL
54
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
(Channel display could be different per model 4ch/8ch/16ch)
[6] Camera : Select the channel to be backup.( Selected channel will be shown as red)
[7] Backup Start : If all setup is completed, click the ‘Backup start’ button then, backup starts.
It shows the backup capacity/ USB pen drive capacity“ so, if everything is OK, click ‘OK’.
[8] Before backup, it shows the USB port, backup time then, select OPTION.
DIGITAL VIDEO RECODER MANUAL
55
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
• Log Backup : The log file will be backup together.
• Password : Backup data can be protected by the password.
• Format Backup Disk : Select whether the viewer program will be backup together with
data file.
- Executable format : Viewer program will b backup together
- Video Format : Only data file will be backup without viewer program
[9] Backup Start : The backup start after click ‘OK’
[10] If the backup is completed, you will see the below icon as a file in USB stick. If you click it,
playback starts.
[11] How to use the viewer program( If you click the backup file, it runs automatically).
DIGITAL VIDEO RECODER MANUAL
56
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
① Scroll bar : It shows the current location from the total playback volume.
② Open : To open the other backup file.
③ Fast reverse playback
④ Reverse playback
⑤ One step reverse playback
⑥ Pause
⑦ One step playback
⑧ Playback
⑨ Fast playback
⑩ 4 split screen
⑪ 9 split screen
⑫ 16 split screen
⑬ Current image capture
⑭ When you convert it to AVI . You can click the ‘START’ and ‘END’ time(circled space) during
playback and if you click ‘AVI’, it converts to ‘AVI’ file.
⑮ If you click it, you can listen to the recorded audio of selected channel.
DIGITAL VIDEO RECODER MANUAL
57
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
12 — Remote Connection-iPhone
12-1 Program Installation
Go to Apple Store website and search and download MPRMS. Then install the MPRMS.
12-2 Program Execution
When the installation is completed, the following icon is created.
Select the Icon and execute it.
12-3 Product Information Registration
Input network information in order to access the DVR a user has.
DIGITAL VIDEO RECODER MANUAL
58
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[1] New Registration
Execute the program on iPhone and click the new button for new registration.
[2] Input Reg Name
Any name is available to use for Reg Name.
DIGITAL VIDEO RECODER MANUAL
59
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[3] Model name selecting
If it is DVR you would use, select DVR.
[4] Log in
DVR ID : Input the user ID registered in the DVR
Password : Input the password registered in the DVR
(Note : You can check the user ID and password in the DVR Setup Menu)
DIGITAL VIDEO RECODER MANUAL
60
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[5] DVR IP input (Only for static IP user)
Dynamic IP user doesn’t make DVR IP input.
(Note) As for Static IP, input the IP address registered on DVR.
[6] DDNS IP Setup (Only for Dynamic IP user)
Static IP user sets it with NO USE
Dynamic IP user sets it with USE
DDNS ID : Input the web code allocated to each DVR.
(Note : A user should keep their basic setting for DDNS IP and DDNS PORT.
DIGITAL VIDEO RECODER MANUAL
61
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[7] DDNS IP setup (Only for dynamic IP user)
After completing all the inputs, push ADD button then the settings are saved.
12-4 Live Viewing
[1] Click the registered DVR name.
DIGITAL VIDEO RECODER MANUAL
62
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] Remote connection
For channel selection, click CH SELECT icon and select the number.
PTZ : Pan/Tilt/Zoom controlling
Remove Time, Resolution, channel info and etc. and display the video only.
It is a still image transmitting function. In case of video disconnection due to network
load while transmitting, you’d better use this function.
Full screen view : If you turn iPhone on one side, it switches into full screen.
(If you touch any part of the full screen, a menu is appeared.
DIGITAL VIDEO RECODER MANUAL
63
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
12-5 Search
Select “Search” icon below.
[1] Select Date/Time
After selecting the date, click “Search” button.
[2] Search key operation
DIGITAL VIDEO RECODER MANUAL
64
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Reverse Playback
Pause
Playback
Return to Live
After clicking “CH SELECT” button, if you select a channel number, the channel is selected.
12-6 Relay out
Relay can be controlled remotely..
Time selection : Alarm output time selection.
OFF : Alarm off
Infinity : Unlimited alarm output
DIGITAL VIDEO RECODER MANUAL
65
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
12-7 PTZ(Pan/Tilt/Zoom) Controlling
PTZ controlling is available on iPhone. The way how to control is the same with on CMS and DVR.
(1) Select
(2) Cancel
(3) Automatic camera focus
(4) Pan/Tilt menu call
(5) Direction movement
(6) Camera focus control
(7) Camera zoom control
(8) Channel selection
(9) Relay out button (User can set relay out)
(10) Pan/Tilt menu selection
(11) OSD display ON/OFF button for live screen
DIGITAL VIDEO RECODER MANUAL
66
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
13 — Windows Mobile Viewer
13-1 Program Installation
Copy the program, MPRMS and save it to the mobile phone.
13-2 Run Program
After save the program into the any folder, you can see the “MPRMS_Setup.cab” file as bleow
picture.
☞ Please refer to the user’s manual of mobile phone how to copy and save the application
program.
Execute the “MPRMS_Setup.CAB” file then “MPRMS” icon will be created on the screen.
DIGITAL VIDEO RECODER MANUAL
67
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
You can see the icon of “MPRMS”.
13-3 Registration
In order to see a video on mobile phone, user must register the DVR network information
properly. For network setting, please refer to the user’s manual of DVR.
[1] Registration
Click the “Add DVR” tap to register a new DVR.
DIGITAL VIDEO RECODER MANUAL
68
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[2] Fill in the required information.
• NAME : Input any name of user’s own accord.
• ID : Input the DVR’s login ID.
• PASS : Input the DVR’s login password.
• MODEL : Select a DVR model among H.264, MPEG-4 and MJPEG.
[3] DDNS
For Dynamic IP user, it supports DDNS service for mobile program.
• Use DDNS : Check on the “Use DDNS”.
•
ID : Input the “WEB CODE” of DVR. You can find the WEB CODE information in the DVR’s
System setup menu.
DIGITAL VIDEO RECODER MANUAL
69
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
• ADDR : Do not change the dedicated IP address. (61.250.157.14)
• PORT : Input the port of DVR.
• SAVE : Save the information.
[4] STATIC (For Static IP User)
• Use STATIC : Check on the “Use STATIC”.
• ADDR : Input the IP address of DVR.
• PORT : Input the port of DVR. (Basic : 3000)
• SAVE : Save the information.
13-4 Connect / Disconnect
[1] Connect
DIGITAL VIDEO RECODER MANUAL
70
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
• Connect : Click the “CONNECT” tap to see the video.
• Info Setup : To modify the DVR information, click the “Info Setup” tap.
• I Only : In case of using low bandwidth, the “I only” helps to see the image
which allows to transmit the I Frame only.
[2] Disconnect
• Disconnect : Click the “Disconnect” to disconnect.
[3] Changing Channel.
ㆍCH : Click the “▼” to change a channel.
[4] Changing DVR
To connect the other DVR, click the “DVR” tap and select a registered DVR in the “DEVICE”.
After selecting a DVR, click the “CONNECT” to see video.
DIGITAL VIDEO RECODER MANUAL
71
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
13-5 Search
To playback recorded image, click the “Search” tap then click the “Rec Info Req” menu to set
the date and time for searching.
After setting the data and time, click the “START” to start playback.
(NOTE : It might be delayed to playback that is depending on network environment.)
13-6 PTZ Control
Click the “Pan Tilt” tap to control the PTZ camera.
Press the direction button to move camera position.
[NOTE : In order to stop moving, user must press the “STOP” button.]
DIGITAL VIDEO RECODER MANUAL
72
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
• Left : Move to the left
• Right : Move to the right.
• Up : Move to the upper.
• STOP : Stop movement.
• Down : Move to the down.
• Normal/Invert : Change direction.
13-7 Zoom / Focus
Click the “Zoom/Focus” tap to control zoom In / Out and Focus In / Out.
• ZOOM IN/OUT : Control zooming of camera.
• FOCUS IN/OUT : Control focusing of camera.
13-8 Preset
DIGITAL VIDEO RECODER MANUAL
73
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Click the “Preset” tap to set up the preset of camera.
• P1~P16 : Select a number.
• MOVE / SET
◎ MOVE : After selecting a number among from P1~P16,
press “SEND” to move camera location.
◎ SET : After selecting a number among from P1~P16,
press “SEND” to set a location of camera.
13-9 Alarm Control
Click the “Alarm” tap to control alarm output.
• Select a number (1~16) : Relay out port. ( Default : 1 )
• Time : Set a dwell time.
• ON/OFF : Press to start or stop.
(Example : If dwell time is set 5 sec., alarm output works for 5sec. when press “ON” button.)
DIGITAL VIDEO RECODER MANUAL
74
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14 — Remote connection- Andriod phone
14-1 Program installation
To install the program on Phone, execute the ‘MARKET’ program and download the ‘MPRMS’ and
install it. If the installation is completed, you will see the ‘MPRMS’ icon on main SCREEN
(ORDER1)
(ORDER2)
(ORDER3)
14-2 Program execution
If you click “MPRMS” icon, it will be executed.
(ICON selection)
(Executed program)
DIGITAL VIDEO RECODER MANUAL
75
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14-3 Product information registration
Please register the device to see it remotely
[1] Registration
Click ‘ADD’ button to start registration.
[2] Input the registration information
(ORDER1)
(ORDER2)
(ORDER3)
(ORDER1) Input the Name, ID(User), Password.
Name : Input any name you want.
DIGITAL VIDEO RECODER MANUAL
76
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
User : Input the USER ID.
Password : Input the same password registered on DVR.
(Notice : DVR ‘MENU’ Æ “SYSTEM” Æ PASSWORD Æ “USER ID” + “PASSWORD”)
IP : It is for Static IP user only.
(ORDER2) If you check “DDNS Use”, DDNS IP input space will be activated
(Notice : It is for Dynamic IP user only )
(ORDER 3) How to check the DDNS ID: DVR ‘MENU’ Æ “SYSTEM” Æ SYSTEM INFORMATION.
Copy the ‘WEBCODE’ and input it to DDNS ID and save it.
(DDNS PORT is automatically displayed as per the WEBCODE.)
14-4 Registered information ‘Modify/ Delete’
If you want to modify or delete the information, click the reversed triangle icon.
When you change the information.
When you delete the information.
TOOL menu close (Dual function : Disconnection )
DIGITAL VIDEO RECODER MANUAL
77
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14-5 Remote connection
Select the registered list for connection.
Once you click the registered device, it shows information and if you click ‘OK’, it will connect DVR
for monitoring.
(List selection)
(Detailed information)
14-6 Live
It shows the live image as a real-time.
(1) Numeric button : To select the channel click the numeric button.
(2) I frame : If the network environment is not good, you can see the ‘i’ frame only.
(3) Show OSD : To display the channel name, date, time, event status etc.,
DIGITAL VIDEO RECODER MANUAL
78
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14-7 Main menu
On the bottom line of screen, there is the main menu. It is for the monitoring changes.
Move to the previous menu or close the monitoring program.
Move to live mode( channel changing, I Frame, OSD display)
PTZ mode
PTZ preset
SEARCH mode
RELAY OUT
Registered information
DIGITAL VIDEO RECODER MANUAL
79
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14-8 PTZ
It is for the remote PTZ control.
(PTZ mode selection)
(PTZ mode screen)
(1) Move to PTZ mode
Select the PTZ connected channel and click the PTZ button.
(2) How to control the PTZ
According to the click, PTZ moves to the selected direction.
ZOOM. It can be operated by +/ -.
FOCUS. It can be operated by +/ -.
TOURING. It moves according to the previously registered ‘PRESET’ number.
IRIS OPEN / CLOSE
DIGITAL VIDEO RECODER MANUAL
80
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
PTZ menu call
AUTO FOCUS
It is OK button for PTZ OSD menu
It is CANCEL or upper menu on PTZ OSD menu
14-9 PRESET
It controls PRESET on PTZ.
(PRESET MODE SELECTION)
(1) How to move PTZ mode
(PRESET MODE SCREEN)
Select the PTZ connected channel and click the PRESET button.
(2) How to move PRESET
• Move : Once you select “Move”, if you select the number, it moves.
• Save : Once you select “Save”, if you select the number, it saves the current location.
DIGITAL VIDEO RECODER MANUAL
81
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14-10 Search
It is for remote search.
(1.SEARCH MODE SELECTION) (2.TIME SEARCH SELECTION) (3.DATE/TIME SELECTION)
(1) SEARCH MODE : Select the SEARCH mode.
(2) Time Search : Click the “Time Search” button to search the time to playback.
(Notice : Return to LIVE, click ‘To Live” button. )
(3) DATE/ TIME : Once you select the DATE, TIME, if you click “Start Search”, it goes to
Playback.
Fast reverse playback
Reverse playback
PAUSE
PLAYBACK
Fast playback
DIGITAL VIDEO RECODER MANUAL
82
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
14-11 Relay out
Relay can be controlled remotely..
(1) Relay : Select the usages (on / off)
(2) Number : Select the relay number.
(3) Time : Select the relay out duration.
(4) Execute : According to the setup 1~3, relay out operates
14-12 Information display
It shows the information of current connection.
(info button selection)
(Connection information LIST)
DIGITAL VIDEO RECODER MANUAL
83
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
[Information display]
It is the example of information.
• IP : 61.250.157.37 : 2000 Via DDNS <- Connected IP information.
• MODEL : 16CH(63,ADT CAPS:0) <- 16Ch --- model
• WebCode : H6F6057200001394 <- Product ID(webcode).
• F/W : 84, N/W:21 <- F/W and network version.
• VSTD : NTSC <- VIDEO standard.
14-13 Disconnection
It disconnects the program.
(Back button selection)
(Yes YES button selection)
There are a couple of program termination mode.
1. If you click ‘BACK’, it asks DISCONNECTION then, you can click YES.
2. Or, you can choose the close button on the phone.
DIGITAL VIDEO RECODER MANUAL
84
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
15 — Appendix
SPECIFICATION
ITEM
4CH
4CH
8CH
16CH
8CH
Video
Video format
Video inputs
Compression
Video outputs
Playback
NTSC/PAL
8CH
H.264
Composite (1) , VGA (1)
Split
Split
Split
Full screen
Full screen(1,4,6,9)
NTSC : 240fps,
PAL : 200fps
Full screen(1,4,6,9, 13, 16)
NTSC : 480fps,
Record
Speed
Frame
NTSC : 120fps,
PAL : 100fps
PAL : 400fps
D1 (30 fps) / Half D1
(60 fps) / CIF (120 fps)
D1 (60 fps) / Half D1
(120 fps) / CIF (240 fps)
D1 (120 fps) / Half D1
(240 fps) / CIF (480 fps)
Event
In/Out
In/Out
Continuous, Schedule, Motion, Sensor, Motion+Sensor
Audio
Alarm
4/1
4/1
Network Communication
CODEC
LAN [10/100, Ethernat (RJ45)]
H.264 ( Dual Codec)
TCP/IP, DHCP
Protocol
Other
Remote access
P/T/Z control
Backup
CMS, Web browser
Yes(RS-485)
USB Pen Drive
2 ports
USB 2.0
support
HDD
(4/8ch DVR : Max. 1 x internal HDD) / (16ch DVR : Max. 2EA HDD)
Temp.
0℃ ~ 40℃
DC 12V 3.5A, Adapter
Power supply
Dimension
4/8CH : 298mm(W) x 57mm(H) x 205mm(D)
16CH : 360mm(w) X 70mm(H) X 350mm(D)
3.5Kg
Unit weight
DIGITAL VIDEO RECODER MANUAL
85
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
Limited 2Year Warranty
This warranty gives the original purchaser specific legal rights and you may also have other
rights, which may vary from state to state. If our products do not function because of any
defect in material or workmanship, we will repair it for free for 1 year on parts and labor from
the date of original purchase. This warranty does not cover modification, abuse, incidental or
consequential damages unless the state of owner’s residence specially prohibits limitations
on incidental or consequential damages.
How to Obtain Factory Service
•
Original purchaser must fill out the warranty card and mail it to the factory with the model
number, serial number and the date of purchase.
•
•
We will repair or replace, and return the system to the owner under this limited warranty.
Please pack the system carefully and securely using the original packing materials, and
send it prepaid and insured to: 16000 Carmenita Rd, Cerritos, CA 90703.
•
Please include a check for $25.00 to cover the cost of return postage and handling. If the
system is returned within the warranty period, please include a proof of purchase. If the
system is out of warranty, you will receive an estimate of the repair cost for your approval
before repair work will be started.
DIGITAL VIDEO RECODER MANUAL
86
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL VIDEO RECORDER MANUAL
MEMO
DIGITAL VIDEO RECODER MANUAL
87
Download from Www.Somanuals.com. All Manuals Search And Download.
|