Clarion Cassette Player XAZ611 User Manual

Owner’s manual  
Mode d’emploi  
Manual de instrucciones  
XAZ611  
AM/FM CASSETTE PLAYER  
WITH CD/MD CHANGER CONTROL  
LECTEUR DE CASSETTE AM/FM AVEC  
COMMANDE DE CHANGEUR CD/MD  
RADIO DE AM/FM Y REPRODUCTOR DE  
CASETES CON CONTROL DE CAMBIADOR DE  
DISCOS COMAPCTOS/MINIDISCOS  
Clarion Co., Ltd.  
PE-1717B  
280-7626-00  
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Inpreso en China  
2001/1 (D·C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling CassetteTapes  
6. REMOTE CONTROL  
1. FEATURES  
Using any of the following types of cassette  
tapes can cause malfunctions.  
• Avoid using cassettes of 120 minutes or longer.  
(Such cassettes have extremely thin tape, so  
the tape can become stretched or cut.)  
• Periodically play a cleaning cassette in the  
player to clean the head.  
• Keep magnet items like magnets, and iron and  
steel items like screwdrivers away from both  
cassette tapes and the tape head in the player.  
• Do not oil the cassette mechanism.  
• Do not use any cassette tapes with peeling  
labels or deformed cases.Such cassette tapes  
can cause breakdowns.  
• When not using the player, always take the  
cassette out of the mechanism. Exposing a  
cassette to direct sunlight, extreme tempera-  
tures or high humidity can damage the cas-  
sette.  
Receiver for remote control unit  
Rotary Encoder Volume Control  
• Cassette tapes with low recording levels  
• Cassette tapes in which the unrecorded sec-  
tion between tracks is shorter than 4 seconds  
• Cassette tapes with noise or the like recorded  
between tracks  
Touch-n-Go Flip Down Detachable Aluminum Face  
Controller for Optional DSP / EQ, TV Tuner and DVD Deck Modules  
Capability to Read CD TEXT Data from Clarion Compatible CD Changer  
BEAT EQ with 3 Adjustment Modes  
CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling  
® FM Reception System  
• Cassette tapes on which there are long unre-  
corded sections in the middle of a track  
Full Logic Tape Transport with True Function / Auto Reverse with Dual Azimuth Adjust  
Dolby ® B Noise Reduction  
Handling precautions  
Operating range: 30° in all directions  
Signal transmitter  
4-Channel Line Level Output with Fader Control  
180W (45W×4) Maximum Power Output  
• Slack in the tape can cause malfunctions. In  
particular for prerecorded cassette tapes and  
90-minute tapes, take up any slack in the tape  
before inserting it into the cassette player.  
Remote control unit  
2. PRECAUTIONS  
This unit uses a precision mechanism. Even in the event that trouble arises, never open the case,  
disassemble the unit, or lubricate the rotating parts.  
This equipment generates, uses, and can radi-  
ate radio frequency energy and, if not installed  
Flip Down Panel  
CAUTION  
and used in accordance with the instructions,  
may cause harmful interference to radio com-  
munications. However, there is no guarantee  
that interference will not occur in a particular  
installation.  
CHANGES OR MODIFICATIONS NOT EX-  
PRESSLY APPROVED BY THE MANUFAC-  
TURER FOR COMPLIANCE COULD VOID  
THE USER’S AUTHORITYTO OPERATETHE  
EQUIPMENT.  
This unit uses a flip-down structure that makes possible large-size displays.  
3. Do not use the FLIP DOWN PANEL as a tray  
to place objects on when it is open.  
CAUTION  
When opening and closing the FLIP DOWN  
PANEL, be careful not to catch your fingers.  
They could be injured.  
4. When closing the FLIP DOWN PANEL, do not  
press the OPEN button 1.  
If this equipment does cause harmful interfer-  
ence to radio or television reception, which can  
be determined by turning the equipment off and  
on, the user is encouraged to consult the dealer  
or an experienced radio/TV technician for help.  
INFORMATION FOR USERS:.  
5. Strong impacts to the operating or display  
section can cause damage or deformation.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE MANU-  
FACTURERWILLVOIDTHEWARRANTY AND  
WILL VIOLATE FCC APPROVAL.  
1. Always use this unit with the FLIP DOWN  
PANEL closed.  
6. If the FLIP DOWN PANEL does not open fully,  
gently open it with your hand.  
Inserting the Batteries  
2. Do not force operations or use this device ab-  
normally when opening or closing the FLIP  
DOWN PANEL.  
1. Turn the remote control unit over, then slide  
the rear cover in the direction of the arrow.  
AA (UM-3/1.5V)  
Batteries  
2. Insert the AA (UM-3/1.5V) batteries that  
came with the remote control unit facing in  
the directions shown in the figure, then close  
the rear cover.  
Notes:  
Using batteries improperly can cause them to ex-  
plode. Take note of the following points:  
When replacing batteries, replace both batteries  
with new ones.  
Do not short-circuit, disassemble or heat batteries.  
Do not dispose of batteries into fire or water.  
Dispose of spent batteries properly.  
Rear cover  
Rear side  
Be sure to unfold and read the next page.  
Veuillez déplier et vous référer à la page suivante.  
Cerciórese de desplegar y de leer la página siguiente.  
8
XAZ611  
XAZ611  
3
XAZ611  
4
280-7626-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. CONTROLS / LES COMMANDES / CONTROLES  
4. NOMENCLATURE  
5. DCP  
Note:  
The control panel can be detached to prevent theft. When detaching the control panel, store it in the  
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).  
Source unit / Appareil pilote / Unidad fuente  
We recommend taking the DCP with you when leaving the car.  
Names of Buttons  
Removing the DCP  
1. Hold down POWER button 3 for 1 second or  
longer to turn off the power.  
Attaching the DCP  
1. Insert the right side of the DCP into the source  
unit.  
1
OPEN button  
8
Preset buttons (1 to 6)  
Direct buttons (1 to 6) (7 to 12)  
ISR (instant station recall) button  
DISP (display) button  
BND (band) button  
2
TITLE button  
2. Insert the left side of the DCP into the source  
unit.  
ADJ (adjust) button  
POWER button  
9
0
!
3
4
5
6
7
2.  
FNC (function) button  
SCN (scan) button  
PS/AS (preset scan/auto store) button  
RPT (repeat) button  
BLS (blank skip) button  
DOLBY NR button  
PROG (program) button  
A-M (audio mode) button  
LD (loudness) button  
ENT (enter) button  
@
#
DCP  
2. Deeply push in OPEN button 1 to unlock the  
FLIP DOWN PANEL.  
1.  
Play/pause button  
With the FLIP DOWN PANEL opened / Ouverture du PANNEAU RABATTABLE /  
Apertura del PANEL ABATIBLE  
If the FLIP DOWN PANEL does not open fully,  
gently open it with your hand.  
RDM (random) button  
BEQ (Beat EQ) button  
$
%
¥
&
Rotary knob  
SEARCH button  
OPEN button  
Cassette tape insertion slot  
Eject button  
CAUTION  
• The DCP can easily be damaged by shocks.  
After removing it, be careful not to drop it  
or subject it to strong shocks.  
Display Items  
• If the FLIP DOWN PANEL is kept open, the  
DCP may drop due to vibration of the car.  
1
Operation status indication  
Clock, Volume, etc. are displayed.  
A-M (audio mode) indication  
LD (loudness) indication  
9
Function mode indication  
Flip down panel  
The names of modes being selected, etc. are  
displayed.  
3. Pull the DCP toward you and remove it.  
This results in damage to the DCP. So close  
the FLIP DOWN PANEL or remove the DCP  
to store into the case.  
2
3
4
5
0
!
@
#
$
%
¥
&
*
(
TA (Traffic announcement) indication  
AF (Alternative frequency) indication  
MANU (manual) indication  
RDM (random) indication  
DCP  
• The connector connecting the source unit  
and the DCP is an extremely important part.  
Be careful not to damage it by pressing on  
it with fingernails, screwdrivers, etc.  
ST (stereo) indication  
Preset channel indication (1 to 6)  
Disc number indication (1 to 12)  
Display / Afficheur / Visualizador  
DAB (Digital audio broadcasting) indication  
RPT (repeat) indication  
Note:  
The disc numbers corresponding to the discs  
in the CD or MD changer light.  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
6
7
8
INFO (Information) indication  
PTY (Programme type) indication  
TP (Traffic programme) indication  
DSP (Digital signal processor)  
SCN (scan) indication  
4. Close the HOLD FLAP.  
BEQ (Beat EQ) indication  
DISC indication  
HOLD FLAP  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
CAUTION  
Be sure to close the HOLD FLAP for safety  
when removing the DCP.  
5
XAZ611  
6
XAZ611  
XAZ611  
7
280-7626-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions of Remote Control Unit Buttons  
CD changer  
MD changer  
Mode  
Radio  
Tape  
TV  
Button  
* FUNC  
Turns power on and off. When pressed and held for 1 second:Turns power off.  
Swithes among radio, tape, CD changer, MD changer, AUX, TV, DAB, DSP, and DVD.  
( BAND  
Switches the side of Moves the next disc  
the tape. in increasing order.  
Switches reception  
band.  
Switches reception  
band.  
DISC UP  
PROG  
TOP  
Increases and decreases volume (in all modes).  
) VOLUME  
¡ SEARCH  
Moves preset  
channels up and  
down.  
Fast-forward and  
rewinds tape.  
APC fast-forward  
and rewind.  
Moves tracks up  
and down.  
When pressed and down.  
held for 1 second:  
Fast-forward/  
Moves preset  
channels up and  
fast-backward.  
PLAY/PAUSE  
No function.  
Switches between  
Switches between  
No function.  
playback and pause. playback and pause.  
Turns mute on and off.  
£ MUTE  
¢ ISR  
Recalls ISR radio station in memory.  
Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio  
mode only).  
Switches among main display, sub display and clock display .  
DISP  
§ SCN  
Fast-forward scan.  
Preset scan.  
Scan play.  
Preset scan.  
PS/AS  
When pressed and  
held for 2 seconds:  
Auto store.  
When pressed and When pressed and  
held for 1 second:  
Disc scan play.  
held for 2 seconds:  
Auto store.  
RPT  
No function.  
Repeat play.  
Repeat play.  
No function.  
BLS  
When pressed and  
held for 1 second:  
Blank tape skip  
function turns on  
and off.  
When pressed and  
held for 1 second:  
Disc repeat play.  
RDM  
DOLBY NR  
MONI  
Select Dolby Noise  
Reduction mode.  
No function.  
Random play.  
When pressed and TV and VTR.  
held for 1 second:  
Switches between  
Disc random play.  
* Some of the corresponding buttons on the source unit and remote control unit have different functions.  
XAZ611  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. OPERATIONS  
Note: Be sure to read this chapter referring to the front diagrams of  
chapter “3. CONTROLS” on page 5 (unfold).  
Basic Operations  
Radio mode TAPE mode CD changer  
CAUTION  
mode MD changer mode TV mode ➜  
DVD mode DAB mode DSP mode ➜  
AUX mode Radio mode ...  
External equipment not connected with CeNET  
is not displayed.  
Be sure to lower the volume before switching  
off the unit power or the ignition key. The  
unit remembers its last volume setting. If  
you switch the power off with the volume  
up, when you switch the power back on, the  
sudden loud volume may hurt your hear-  
ing and damage the unit.  
Adjusting the volume  
Turning the Rotary knob $ clockwise increases  
the volume; turning it counterclockwise de-  
creases the volume.  
The clock is displayed when the ignition key  
is turned to the ACC (accessory) or IGN (ig-  
nition-on) position even when the unit  
power is off. In some cars, the clock may  
momentarily disappear when the ignition  
key is turned to the START position. The  
clock will reappear after the engine has  
started and the ignition key is released to  
the IGN (ignition-on) position.  
The volume level is from 0 (minimum) to 33 (maxi-  
mum).  
Switching the display  
Press DISP button 0 to select the desired display.  
Each time you press DISP button 0, the display  
switches in the following order:  
Main display  
Turning on/off the power  
Note:  
• Be careful about using this unit for a long time with-  
out running the engine. If you drain the car’s bat-  
tery too far, you may not be able to start the en-  
gine and this can reduce the service life of the  
battery.  
Sub (title) display  
1. Press POWER button 3.  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
3. Press and hold POWER button 3 for 1 sec-  
ond or longer to turn off the power for the unit.  
Clock display  
Note:  
• System check  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, “SYSTEM CHCK” appears in the dis-  
play, so press POWER button 3. The system  
check starts within the unit.When the system check  
is complete, the power is turned off, so press  
POWER button 3 again.  
Main display...  
Once selected, the preferred display becomes  
the display default.When a function adjustment  
such as volume is made, the screen will mo-  
mentarily switch to that function’s display, then  
revert back to the preferred display several  
seconds after the adjustment.  
Selecting a mode  
1. Press FNC button 3 to change the mode of  
operation.  
When you have entered a title in a CD, it ap-  
pears in the sub display. If you have not en-  
tered a title, “NO-TITLE” appears in the title  
display instead. For information on how to en-  
ter a title, refer to the subsection “Entering  
titles” in the “Other Handy Functions”.  
2. Each time you press FNC button 3, the mode  
of operation changes in the following order:  
10  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Setting the Beat EQ  
Adjusting the MID  
This unit comes with 3 types of sound tone effects  
stored in memory. Select the one you prefer.  
1. Press A-M button @ and select “MID<GAIN>”  
2. Turning the Rotary Knob $ clockwise empha-  
sizes the MID; turning it counterclockwise at-  
tenuates the MID.  
The factory default setting is “OFF”.  
Each time you press BEQ button 7, the tone  
effect changes in the following order:  
The factory default setting is “0” (Adjustment  
range: -6 to +6).  
“1 BASS BOOST“2 IMPACT“3 EXCITE”  
“USER CUSTOM” “TONE BYPASS” ➜  
“1 BASS BOOST” ...  
3. When the adjustment is complete, press A-M  
button @ several times until function mode is  
reached.  
• 1 BASS BOOT: bass emphasized  
• 2 IMPACT  
• 3 EXCITE  
: treble emphasized  
Adjusting the treble  
1. Press A-M button  
: bass and treble emphasized  
@
and select  
• USER CUSTOM  
• TONE BYPASS  
TREB<GAIN>”.  
2. Turning the Rotary knob $ clockwise empha-  
sizes the treble; turning it counterclockwise  
attenuates the treble.  
Adjusting the tone  
Press A-M button @ and select the item to ad-  
just. Each time you press A-M button @, the item  
changes in the following order:  
The factory default setting is “0”. (Adjustment  
range: –6 to +6)  
3. When the adjustment is complete, press A-M  
button @ several times until the function mode  
is reached.  
When “1 BASS BOOST” is set  
“BASS BOOST“BALANCE“FADER”  
“ST NO TITLE”  
Adjusting the balance  
1. Press A-M button @ and select “BAL”.  
When “2 IMPACT” is set  
“HIGHT BOOST” “BALANCE” ➜  
“FADER” “ST NO TITLE”  
2. Turning the Rotary knob $ clockwise empha-  
sizes the sound from the right speaker; turn-  
ing it counterclockwise emphasizes the sound  
from the left speaker.  
When “3 EXCITE” is set  
“IMPACT” “BALANCE” “FADER” ➜  
“ST NO TITLE”  
The factory default setting is “0”. (Adjustment  
range: L13 to R13)  
When “USER CUSTOM” is set  
“BASS<GAIN>” “MID<GAIN>” “TREB  
<GAIN>” “BALANCE” “FADER” “ST  
NO TITLE”  
3. When the adjustment is complete, press A-M  
button @ several times until the function mode  
is reached.  
When “TONE BYPASS” is set  
Adjusting the fader  
“BALANCE” “FADER” “ST NOTITLE”  
1. Press A-M button @ and select “FAD”.  
Adjusting the bass  
1. Press A-M button  
2. Turning the Rotary knob $ clockwise empha-  
sizes the sound from the front speakers; turn-  
ing it counterclockwise emphasizes the sound  
from the rear speakers.  
@
and select  
BASS<GAIN>”.  
2. Turning the Rotary knob $ clockwise empha-  
sizes the bass; turning it counterclockwise  
attenuates the bass.  
The factory default setting is “0”. (Adjustment  
range: F12 to R12)  
3. When the adjustment is complete, press A-M  
button @ several times until the function mode  
is reached.  
The factory default setting is “0”. (Adjustment  
range: –6 to +8)  
3. When the adjustment is complete, press A-M  
button @ several times until the function mode  
is reached.  
XAZ611  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Radio Operations  
Adjusting the Beat EQ  
1. Press BEQ button 7 and select the Beat EQ  
FM reception  
For enhanced FM performance the  
®
mode (1 to 3) to adjust.  
tuner includes signal actuated stereo control, En-  
hanced Multi AGC, Impulse noise reduction circuits  
and Multipath noise reduction circuits.  
2. Press A-M button @ and select “BEQ”.  
3. Turning the Rotary knob $ clockwise adjusts  
in the + direction; turning it counterclockwise  
adjusts in the – direction.  
Changing the reception area  
This unit is initially set to USA frequency intervals  
of 10 kHz for AM and 200 kHz for FM.When using  
it outside the USA, the frequency reception range  
can be switched to the intervals below.  
When 1 BASS BOOST is selected, you can ad-  
just the bass in the range of ±3.  
When 2 IMPACT is selected, you can adjust the  
treble in the range of ±3.  
When 3 EXCITE is selected, you can adjust the  
bass and treble in the range of ±3.  
Setting the reception area  
1. Press BND button ! and select the desired  
4. When the adjustment is complete, press A-M  
button @ several times until the function mode  
is reached.  
radio band (FM or AM).  
2. While pressing DISP button 0, each time you  
press and hold the number “6” of the Preset  
buttons 8 for 2 seconds or longer, the recep-  
tion area switches from inside the USA to  
outside the USA or from outside the USA to  
inside the USA.  
Turning on/off the loudness  
The loudness effect emphasizes the bass and  
treble to create a natural sound tone. When you  
are listening to music at a low volume, it is rec-  
ommended to use the loudness effect.  
Any station preset memories are lost when the  
reception area is changed.  
1. Press and hold LD button @ for 1 second or  
longer to turn on the loudness effect. When  
the loudness effect is turned on, “LD” lights in  
the display.  
Listening to the radio  
1. Press FNC button 3 and select the radio  
mode.  
2. Press and hold LD button @ for 1 second or  
longer to turn off the loudness effect. “LD”  
goes off in the display.  
2. Press BND button ! and select the radio  
band. Each time the button is pressed, the  
radio reception band changes in the follow-  
ing order:  
FM1 FM2 FM3 AM FM1...  
3. Press the right or left side of SEARCH button  
% to tune in the desired station.  
Tuning  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
Seek tuning  
1. Press BND button ! and select the desired  
band (FM or AM).  
If “MANU” is lit in the display, press and hold  
BND button ! for 1 second or longer. “MANU”  
in the display goes off and seek tuning is now  
available.  
2. Press the right or left side of SEARCH button  
% to automatically seek a station.  
When the right side of SEARCH button % is  
pressed, the station is sought in the direction  
of higher frequencies; if the left side of  
SEARCH button % is pressed, the station is  
sought in the direction of lower frequencies.  
12  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Operations  
2. Press and hold AS button 4 for 2 seconds or  
longer. The stations with good reception are  
stored automatically to the preset buttons.  
Manual tuning  
There are 2 ways available:Quick tuning and step  
tuning.  
When you are in the step tuning mode, the fre-  
quency changes one step at a time. In quick tun-  
ing mode, you can quickly tune the desired fre-  
quency.  
1. Press BND button ! and select the desired  
band (FM or AM).  
Preset scan  
Preset scan receives the stations stored in pre-  
set memory in order.This function is useful when  
searching for a desired station in memory.  
1. Press PS button 4.  
If “MANU” is not lit in the display, press and  
hold BND button ! for 1 second or longer.  
MANU” lights in the display and manual tun-  
ing is now available.  
2. When a desired station is tuned in, press PS  
button 4 again to continue receiving that sta-  
tion.  
Note:  
2. Tune into a station.  
• Be careful not to press and hold PS button 4 for  
2 seconds or longer, otherwise the auto store func-  
tion engages and the unit starts storing stations.  
Quick tuning:  
Press and hold the right or left side of  
SEARCH button % for 1 second or longer to  
tune in a station.  
Instant station recall (ISR)  
Step tuning:  
Instant station recall is a special radio preset that  
instantly accesses a favorite radio station at a  
touch of a button. The ISR function even oper-  
ates with the unit in other modes.  
Press the right or left side of SEARCH button  
% to manually tune in a station.  
Recalling a preset station  
ISR memory  
1. Select the station that you wish to store in ISR  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio sta-  
tions in memory.Pressing the corresponding pre-  
set button recalls the stored radio frequency au-  
tomatically.  
memory.  
2. Press and hold ISR button 9 for 2 seconds  
or longer.  
Recalling a station with ISR  
In any mode, press ISR button 9 to turn on the  
radio function and tune the selected radio sta-  
tion. “ISR” appears in the display. Press ISR but-  
ton 9 again to return to the previous mode.  
1. Press BND button ! and select the desired  
band (FM or AM).  
2. Press the corresponding Preset button 8 to  
recall the stored station.  
Press and hold one of the Preset buttons 8  
for 2 seconds or longer to store that station into  
preset memory.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
2. Press and hold one of the Preset buttons 8  
for 2 seconds or longer to store the current  
station into preset memory.  
Auto store  
Auto store is a function for storing up to 6 sta-  
tions that are automatically tuned in sequentially.  
If 6 stations cannot be received, a previously  
stored station remains unoverwritten at the  
memory position.  
1. Press BND button ! and select the desired  
band (FM or AM).  
XAZ611  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Operations  
Loading a tape  
Ejecting a tape  
1. Press OPEN button 1 to access the cassette  
tape insertion slot behind the FLIP DOWN  
PANEL.  
1. Press OPEN button 1 to access the cassette  
Eject button & behind the FLIP DOWN  
PANEL.  
2. Load a tape into the cassette tape insertion  
slot. “LOADING” appears in the display and  
starts playing.  
2. Press Eject button & to eject a tape and take  
it out.  
3. Close the FLIP DOWN PANEL.  
When a metal or chrome bias (70µ sec) tape is  
inserted, the metal tape setting is selected auto-  
matically.  
CAUTION  
3. Close the FLIP DOWN PANEL.  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
.
Notes:  
CAUTION  
• If the FILP DOWN PANEL does not open fully, gen-  
tly open with your hand.  
• The radio mode is selected automatically 4 sec-  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
Notes:  
onds after Eject button & is pressed.  
• If the FILP DOWN PANEL does not open fully, gen-  
tly open with your hand.  
If the auto antenna terminal for this unit is con-  
nected, the antenna is extended automatically. If  
you are in a location where the antenna may strike  
something, press FNC button 3 to switch the  
mode.  
• Do not leave the FLIP DOWN PANEL open. Be  
sure to close it to avoid any possible mechanical  
damage.  
• Do not put your hands, fingers or foreign objects  
into the cassette tape insertion slot.  
• When a tape has already been loaded in the cas-  
sette tape insertion slot, another one cannot be  
inserted into it. Never try to insert another tape  
forcibly.  
Switching to the other side of the tape  
Press PROG button ! to change tape direction  
and playback.  
The tape mechanism automatically reverses direc-  
tion and engage playback at the end of the tape  
(auto reverse).  
Listening to a tape already inserted  
Press FNC button 3 to select the tape mode.  
The tape starts playing automatically. If no tape  
is loaded in the unit, “NO CASS” appears in the  
display.  
Fast-forwarding/rewinding  
FF(fast-forward):  
Press the right side of SEARCH button %.  
REW(rewind):  
Press the left side of SEARCH button %.  
Canceling FF/REW:  
Press Play/pause button #.  
Pausing tape play  
1. Press Play/pause button # to pause tape  
playback. “PAUSE” appears in the display.  
When the end of the tape is reached with FF/REW,  
the mechanism automatically reverses tape direc-  
tion and resumes playback.  
2. Press Play/pause button # again to resume  
tape playback.  
If you select another mode during FF/REW, it is  
selected with FF/REW continued.  
The mechanism automatically makes FF/REW  
stop when the end of the tape is reached.  
This function is called “monitor mode”.  
14  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Operations  
2. To cancel the intro tape scan, press SCN but-  
ton 4 again. “SCN” goes off from the display  
and the current track continues to play.  
APC (Auto Program Control) function  
The APC function allows the tape to skip forward  
to the beginning of the next track or rewind to the  
start of the current track.  
When the end of the tape is reached during the  
intro tape scan, the tape mechanism automatically  
reverses direction and continues the intro tape  
scan.  
Skipping forward to the next track (“APC-  
FF”)  
During tape playback, press the right side of  
SEARCH button % twice to fast-forward to the  
next track. The next track starts playing.  
If you select another mode during the intro tape  
scan, the mechanism automatically makes the intro  
tape scan stop when it finds the next track (APC  
function).  
Skipping backwards to the start of the cur-  
rent track (“APC-REW”)  
During tape playback, press the left side of  
SEARCH button % twice to rewind to the start  
of the current track. The current track plays from  
the beginning.  
Tape selection repeat  
The tape selection repeat continuously plays the  
current track.This function continues automatically  
until it is canceled.  
1. Press RPT button 5. “RPT” lights in the dis-  
play and the current track is repeated.  
2. To cancel the repeat play, press RPT button  
5 again.RPT” goes off from the display and  
normal play resumes.  
Canceling FF/REW APC to resume playback  
Press Play/pause button #.  
If you select another mode during APC mode, it is  
selected with APC mode continued.  
The mechanism automatically makes APC mode  
stop when it finds the next track (in APC-FF) or  
the start of the current track (in APC-REW). This  
function is called “monitor mode”.  
Blank tape skip  
The blank tape skip allows you to skip blank sec-  
tions of tape that are over 12 seconds long.  
1. Press and hold RPT button 5 for 1 second  
or longer. “BLS” lights in the display and the  
mechanism fastforward to the next track se-  
lection.  
2. To cancel the blank tape skip, press and hold  
RPT button 5 for 1 second or longer again.  
BLS” goes off from the display and normal  
play resumes.  
Dolby noise reduction system  
The Dolby noise reduction system increases the  
volume level of high frequency sounds during  
recording and sets it back to their original level  
during play. This system reduces hissing noise  
which is typical of cassette tapes.  
Dolby noise reduction manufactured under license  
from Dolby Laboratories Licensing Corporation.  
Dolby and the double-D symbol are trademarks of  
Dolby Laboratories Licensing Corporation.  
1. Press DOLBY NR button 6 to select Dolby  
noise reduction. Each time you press DOLBY  
NR button 6, the Dolby changes in the fol-  
lowing order:  
Notes:  
The APC, intro tape scan, tape selection repeat and  
blank skip may not work properly with tapes of the  
following qualities:  
Tapes on which the recording level is too low.  
Tapes on which there is much noise between se-  
lections.  
Tapes on which there are long pauses in the middle  
of selections.  
Tapes on which there are less than 4 seconds of  
blank space between selections.  
DOLBY B NR ONDOLBY NR OFFDOLBY  
B NR ON....  
2. When DOLBY B NR ON is selected, “DOLBY  
B NR” appears in the display.  
Intro tape scan  
The intro tape scan allows the first 10 seconds  
of all the tracks on the tape to be played.  
This function continues automatically until it is  
canceled.  
1. Press SCN button 4 to start the intro tape  
scan. “SCN” lights in the display.  
XAZ611  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Handy Functions  
6. Press DISP button 0 to select a character.  
Each time you press DISP button 0, the char-  
acter changes in the following order:  
Setting the clock  
1. Press and hold ADJ button 2 for 1 second or  
longer to switch to the adjustment selection  
display.  
Capital letters Numbers Symbols ➜  
Capital letters...  
2. Press the right or left side of SEARCH button  
7. Turn the Rotary knob $ to select the desired  
character. Turning the Rotary knob $ clock-  
wise moves the cursor to the next character;  
turning it counterclockwise moves the cursor  
to the previous character.  
% to select “CLOCK”.  
3. Press ENT button #.  
4. Press the right or left side of SEARCH button  
% to select the hour or the minute.  
5. Turn the Rotary knob $ clockwise or coun-  
8. Repeat steps 5 to 7 to enter up to 10 charac-  
ters for the title.  
terclockwise to set the correct time.  
The clock is displayed in 12-hour format.  
6. Press ENT button # to store the time into  
memory.  
9. Press and hold ENT button # for 2 seconds  
or longer to store the title into memory and  
cancel title input mode.  
7. Press ADJ button 2 to return to the previous  
mode.  
Clearing titles  
1. Play a CD in a CD changer or tune a radio  
station or TV station that you want to clear  
the title for.  
Note:  
You cannot set the clock when it is displayed with  
only the ignition on. If you drain or remove the car’s  
battery or take out this unit, the clock is reset. While  
setting the clock, if another button or operation is  
selected, the clock set mode is canceled.  
2. Press DISP button 0 and display the sub-  
title.  
3. Press TITLE button 2. “TITL” appears in the  
display and the display switches to the title  
input display.  
Entering titles  
Titles up to 10 characters long can be stored in  
memory and displayed for radio stations and CDs.  
The numbers of titles that can be entered for each  
mode are as follows.  
4. Press BND button !.  
5. Press and hold ENT button # for 2 seconds  
or longer to clear the title and cancel the title  
input mode.  
Mode  
Number of titles  
30 titles  
Radio mode  
TV mode  
Hi / Lo dimmer control  
15 titles  
You can adjust the reduced illumination level of  
the dimmer.  
CD changer mode  
CDC655z connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
60 titles  
The factory default setting is “ON”.  
1. Press and hold ADJ button 2 for 1 second or  
longer to switch to the adjustment selection dis-  
play.  
100 titles  
50 titles  
1. Press FNC button 3 to select the mode you want  
2. Press the right or left side of SEARCH button  
to enter a title (radio, CD changer or TV).  
% to select “DIMMER”.  
Titles cannot be entered for MDs with this unit.  
2. Select and play a CD in a CD changer or tune  
to an appropriate TV or radio station.  
3. Turn the Rotary knob $ clockwise to “ON” or  
counterclockwise to “OFF”.  
4. Press ADJ button 2 to return to the previous  
3. Press DISP button 0 and display the sub-  
mode.  
title.  
4. Press TITLE button 2. “TITL” appears in the  
display and the cursor position flashes.  
5. Press the right or left side of SEARCH button  
% to move the cursor.  
16  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Handy Functions  
Message display  
When the unit is powered on or off, a message is  
displayed. The user can turn this message dis-  
play ON or OFF.  
The factory default setting is “ON”.  
1. Press and hold ADJ button 2 for 1 second or  
longer to switch to the adjustment selection display.  
2. Press the right or left side of SEARCH button  
% to select “MESSAGE”.  
3. Turn the Rotary knob $ clockwise or coun-  
terclockwise to set message display ON or  
OFF.  
4. Press ADJ button 2 to return to the previous  
mode.  
AUX function  
This system has an external input jack so you  
can listen to sounds and music from external  
devices when connected to this unit.  
Selecting AUX IN sensitivity  
Make the following settings to select the sensi-  
tivity when sounds from external devices con-  
nected to this unit are difficult to hear even after  
adjusting the volume.  
1. Press and hold the ADJ button 2 for 1 sec-  
ond or longer to set Adjust mode.  
2. Press the SEARCH button % and select “AUX  
SENS”.  
3. Turn the Rotary knob $ clockwise or coun-  
terclockwise as needed and select from  
SENS HIGH”, “SENS MID” or “SENS LOW”.  
The factory default setting is SENS MID”.  
4. Press ADJ button 2 to return the previous  
mode.  
XAZ611  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
CD changer functions  
Selecting a CD  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all  
the CD changer functions.This unit can control a  
total of 2 changers (MD and/or CD).  
Each of the Direct button 8 corresponds to a  
disc loaded into the magazine.  
Selecting a disc from 1 to 6  
Press the corresponding Direct button 8 (1 to  
Press FNC button 3 and select the CD changer  
mode to start play. If 2 CD changers are con-  
nected, press FNC button 3 to select the CD  
changer for play.  
6) to select the desired disc.  
Selecting a disc from 7 to 12 (only when a  
12 disc CD changer is used.)  
Press and hold the corresponding Direct button  
8 (7 to 12) for 1 second or longer to select the  
desired disc.  
If “NO MAG” appears in the display, insert the  
magazine into the CD changer. “LOADING” ap-  
pears in the display while the player loads (checks)  
the magazine.  
If “NO DISCappears in the display, eject the maga-  
zine and insert discs into each slot.Then, reinsert  
the magazine back into the CD changer.  
If a CD is not loaded in a slot of the magazine,  
pressing the Direct button 8 corresponding to its  
disc number is invalid.  
Selecting a track  
Track-up  
CAUTION  
1. Press the right side of SEARCH button % to  
CD ROM discs cannot be played in the CD  
changer.  
move ahead to the beginning of the next track.  
2. Each time you press the right side of SEARCH  
button %, the track advances ahead to the  
beginning of the next track.  
Pausing play  
1. Press Play/pause button # to pause play.  
PAUS” appears in the display.  
Track-down  
1. Press the left side of SEARCH button % to  
move back to the beginning of the current  
track.  
2. To resume play, press Play/pause button #  
again.  
2. Press the left side of SEARCH button % twice  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
to move to the beginning of the previous track.  
Fast-forward/fast-backward  
1. Press DISP button 0 to display the title.  
Fast-forward  
2. Each time you press and hold DISP button  
0 for 1 second or longer, the title display  
changes in the following order:  
Press and hold the right side of SEARCH button  
% for 1 second or longer.  
Fast-backward  
User title Disc title Artist name Track  
title  
Press and hold the left side of SEARCH button  
Note:  
% for 1 second or longer.  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO-TITLE” appears in the  
display.  
Scrolling a CD-text title  
When a CD-text title is longer than 11 charac-  
ters, you can scroll the display as follows.  
1. Display the CD-text title (disc or track).  
2. Press TITLE button 2. The title scrolls.  
18  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Changer Operations  
Disc repeat play  
Top function  
The top function plays from the first track (track  
No. 1) of the disc.  
After all the tracks on the current disc have been  
played, the disc repeat play automatically replays  
the current disc over from the first track.This func-  
tion continues automatically until it is canceled.  
When playing a disc 1 to 6  
Press the Direct button 8 (1 to 6) with the same  
number as the CD playing.  
1. Press and hold RPT button 5 for 1 second  
or longer. “DISC” and “RPT” light in the dis-  
play and the disc repeat play starts.  
When playing a disc 7 to 12 (only when a  
12 disc CD changer is used).  
2. To cancel the disc repeat play, press and hold  
RPT button 5 again. “DISC” and “RPT” go  
off from the display and normal play resumes  
on the current track.  
Press and hold for 1 second or longer the Direct  
button 8 (7 to 12) with the same number as the  
CD playing.  
If a CD is not loaded in a slot of the magazine,  
pressing the Direct button 8 corresponding to its  
disc number is invalid.  
Random play  
The random play selects and plays individual  
tracks on the disc in no particular order.This func-  
tion continues automatically until it is canceled.  
Scan play  
The scan play locates and plays the first 10 sec-  
onds of each track on a disc automatically. This  
function continues on the disc until it is canceled.  
1. Press RDM button 6. “RDM” lights in the dis-  
play and the random play begins.  
The scan play is useful when you want to select a  
desired track.  
2. To cancel the random play, press RDM but-  
ton 6 again. “RDM” goes off from the display  
and normal play resumes.  
1. Press SCN button 4 to start track scanning.  
SCN” lights in the display.  
2. To cancel the scan play, press SCN button 4  
again. “SCN” goes off from the display and  
the current track continues to play.  
Disc random play  
The disc random play selects and plays individual  
tracks or discs automatically in no particular or-  
der. This function continues automatically until it  
is canceled.  
Disc scan play  
The disc scan play locates and plays the first 10  
seconds of the first track on each disc in the cur-  
rently selected CD changer. This function con-  
tinues automatically until it is canceled.  
1. Press and hold RDM button 6 for 1 second  
or longer. “DISC” and “RDM” light in the dis-  
play and the disc random play starts.  
2. To cancel the disc random play, press and hold  
RDM button 6 again. “DISC” and “RDM” go  
off from the display and normal play resumes  
from the current track.  
The disc scan play is useful when you want to se-  
lect a desired CD.  
1. Press and hold SCN button 4 for 1 second  
or longer. “DISC” and “SCN” light in the dis-  
play and the disc scan play starts.  
2. To cancel the disc scan play, press SCN but-  
ton 4 again. “DISC” and “SCN” go off from  
the display and the current track continues to  
play.  
Repeat play  
The repeat play continuously plays the current  
track.This function continues automatically until it  
is canceled.  
1. Press RPT button 5. “RPT” lights in the dis-  
play and the current track is repeated.  
2. To cancel the repeat play, press RPT button  
5 again. “RPT” goes off from the display and  
normal play resumes.  
XAZ611  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MD Changer Operations  
2. Each time you press the right side of SEARCH  
button %, the track advances ahead to the  
beginning of the next track.  
MD changer functions  
When an optional MD changer is connected  
through the CeNET cable, this unit controls all  
the MD changer functions. This unit can control  
a total of 2 changers (MD and/or CD).  
Track-down  
1. Press the left side of SEARCH button % to  
move back to the beginning of the current track.  
Press FNC button 3 and select the MD changer  
mode to start play. If 2 MD changers are con-  
nected, press FNC button 3 to select the MD  
changer for play.  
2. Press the left side of SEARCH button % twice  
to move to the beginning of the previous track.  
If “NO DISC” appears in the display, load MDs into  
the MD changer.  
Fast-forward/fast-backward  
Fast-forward  
Press and hold the right side of SEARCH button  
% for 1 second or longer.  
Pausing play  
1. Press Play/pause button # to pause play.  
PAUSE” appears in the display.  
Fast-backward  
Press and hold the left side of SEARCH button  
% for 1 second or longer.  
2. To resume play, press Play/pause button #  
again.  
Top function  
Switching disc titles and track titles  
The top function plays from the first track (track  
No. 1) of the disc. Press the Direct button 8 (1  
to 6) with the same number as the MD playing.  
This unit can display disc titles and track titles  
already entered on MDs. Titles up to 128 char-  
acters long can be displayed by scrolling the titles.  
If an MD is not loaded in a slot of the MD changer,  
pressing the Direct button 8 corresponding to its  
disc number is invalid.  
Titles cannot be entered for MDs with this unit.  
1. Press DISP button 0 to display the title. The  
disc title or track title is displayed.  
2. Each time you press and hold DISP button  
0 for 1 second or longer, the display toggles  
between the disc title and the track title.  
Scan play  
The scan play locates and plays the first 10 sec-  
onds of each track on a disc automatically. This  
function continues on the disc until it is canceled.  
Scrolling titles  
When a title is longer than 11 characters, you  
can scroll through it with the following operation.  
The scan play is useful when you want to select a  
desired track.  
1. Press SCN button 4 to start track scanning.  
SCN” lights in the display.  
1. Display the MD title (disc or track).  
2. Press TITLE button 2.  
2. To cancel the scan play, press SCN button 4  
again. “SCN” goes off from the display and  
the current track continues to play.  
The display scrolls through the title.  
Selecting an MD  
Disc scan play  
Each of the Direct button 8 corresponds to an  
MD loaded into the MD changer. Press the cor-  
responding Direct button 8 (1 to 6) to select the  
desired disc.  
The disc scan play locates and plays the first 10  
seconds of the first track on each disc in the cur-  
rently selected MD changer. This function con-  
tinues automatically until it is canceled.  
If an MD is not loaded in a slot of the MD changer,  
pressing the Direct button 8 corresponding to its  
disc number is invalid.  
The disc scan play is useful when you want to se-  
lect a desired MD.  
1. Press and hold SCN button 4 for 1 second  
or longer. “DISC” and “SCN” light in the dis-  
play and the disc scan play starts.  
Selecting a track  
Track-up  
2. To cancel the disc scan play, press and hold  
SCN button 4 again. “DISC” and “SCN” go  
off from the display and the current track con-  
tinues to play.  
1. Press the right side of SEARCH button % to  
move ahead to the beginning of the next track.  
20  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MD Changer Operations  
Repeat play  
TV Operations  
TV tuner functions  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is canceled.  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
1. Press RPT button 5. “RPT” lights in the dis-  
play and the current track is repeated.  
Watching a TV  
1. Press FNC button 3 and select theTV mode.  
2. To cancel the repeat play, press RPT button  
5 again. “RPT” goes off from the display and  
normal play resumes.  
2. Press BND button ! to select the desired TV  
band (TV1 or TV2). Each time the button is  
pressed, the input selection toggles between  
TV1 and TV2.  
Disc repeat play  
After all the tracks on the current disc have been  
played, the disc repeat play automatically replays  
the current disc over from the first track.This func-  
tion continues automatically until it is canceled.  
3. Press the right or left side of SEARCH button  
% to tune in the desired TV station.  
1. Press and hold RPT button 5 for 1 second  
or longer. “DISC” and “RPT” light in the dis-  
play and the disc repeat play starts.  
Watching a video  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12V video cassette player (VCP) or video cas-  
sette recorder (VCR) to the TV tuner input termi-  
nal.  
2. To cancel the disc repeat play, press and hold  
RPT button 5 again. “DISC” and “RPT” go  
off from the display and normal play resumes  
on the current track.  
1. Press RDM button 6 to select VTR.  
2. To return to the TV broadcast, press RDM  
Random play  
button 6.  
The random play selects and plays individual  
tracks on the disc in no particular order.This func-  
tion continues automatically until it is canceled.  
Tuning  
There are 3 types of tuning mode available, Seek  
tuning, manual tuning and preset tuning.  
1. Press RDM button 6. “RDM” lights in the dis-  
play and the random play begins.  
2. To cancel the random play, press RDM but-  
ton 6 again. “RDM” goes off from the display  
and normal play resumes.  
Seek tuning  
1. Press BND button ! to select the desired TV  
band (TV1 or TV2).  
If “MANU” is lit in the display, press and hold  
BND button ! for 1 second or longer. “MANU”  
in the display goes off and seek tuning is now  
available.  
Disc random play  
The disc random play selects and plays individual  
tracks or discs automatically in no particular or-  
der. This function continues automatically until it  
is canceled.  
2. Press the right or left side of SEARCH button  
% to automatically seek a station.  
Press the right side of SEARCH button % to  
automatically tune up the frequency band to  
the next available TV station; press the left  
side to automatically tune down.  
1. Press and hold RDM button 6 for 1 second  
or longer. “DISC” and “RDM” light in the dis-  
play and the disc random play starts.  
2. To cancel the disc random play, press and hold  
RDM button 6 again. “DISC” and “RDM” go  
off from the display and normal play resumes  
from the current track.  
XAZ611  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Operations  
Manual tuning  
There are 2 ways available:Quick tuning and step  
tuning.  
When you are in the step tuning mode, the fre-  
quency changes one step at a time. In quick tun-  
ing mode, you can quickly tune the desired fre-  
quency.  
1. Press BND button ! and select the desired  
TV band (TV1 or TV2).  
2. Press and hold AS button 4 for 2 seconds or  
longer. The stations with good reception are  
automatically stored to the Preset buttons 8.  
Preset scan  
1. Press BND button ! and select the desired  
Preset scan allows the user to view each preset  
position before it automatically advances to the  
next preset. This function is useful for searching  
for desired TV station in memory.  
band (TV1 or TV2).  
If “MANU” is not lit in the display, press and  
hold BND button ! for 1 second or longer.  
MANU” lights in the display and manual tun-  
ing is now available.  
1. Press PS button 4.  
2. When the desired station is found, press PS  
button 4 again to remain tuned to that sta-  
tion.  
2. Tune into a station.  
Quick tuning:  
Press and hold the right or left side of  
SEARCH button % for 1 second or longer to  
tune in a station.  
Note:  
• Do not press and hold PS button 4 for 2 seconds  
or longer. Doing so will trigger the auto store func-  
tion and start storing stations into memory.  
Step tuning:  
Press the right or left side of SEARCH button  
% to manually tune in a station.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
Recalling a preset station  
1. Press and hold ADJ button 2 for 1 second or  
longer to switch to the adjustment selection  
display.  
A total of 12 TV stations can be stored (6-TV1  
and 6-TV2). This allows you to select your favor-  
iteTV stations and store them in memory for later  
recall.  
2. Press the right or left side of SEARCH button  
% to select “TV DIVER”.  
1. Press BND button ! and select the desired  
TV band (TV1 or TV2).  
3. Press ENT button #.  
2. To recall a stored TV station, press the de-  
4. Turn the Rotary knob $ clockwise to set to  
ON” or counterclockwise to set to “OFF”.  
sired Preset button 8 to select that station.  
Press and hold one of the Preset buttons 8  
for 2 seconds or longer to store the current sta-  
tion into the preset memory.  
ON:  
Sets reception emphasizing the visual.  
OFF:  
Sets the diver setting to OFF.  
5. Press ENT button #.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
6. Press ADJ button 2 to return to the previous  
mode.  
2. Press and hold one of the Preset buttons 8  
for 2 seconds or longer to store the current  
station to that preset memory.  
Auto store  
Auto store selects 6TV stations automatically and  
stores each one into a preset memory.  
If there are not 6 stations with good reception,  
stations previously stored in memory remain and  
only the strong stations are stored into memory.  
22  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AC Processor Operations  
DSP control function  
Selecting the easy mode or the  
professional mode  
* The factory default setting is “STD”.  
1. Press and hold ADJ button 2 for 1 second or  
longer to switch to the adjustment selection  
display.  
If the DSP (DPH910), sold separately, is con-  
nected to this unit using the CeNET cable, all  
functions of the AC Processor can be controlled.  
DSF functions  
2. Press the right or left side of SEARCH button  
There are 2 modes available in DPH910, STD  
mode and professional mode. Choose one of  
them and adjust the sound field and the sound  
quality.  
% to select “AC-P SEL”.  
3. Turn the Rotary knob $ clockwise or coun-  
terclockwise to set the mode to “STD” or  
PRO”.  
Functions common to each mode:  
Auto loudness, etc.  
4. Press ADJ button 2 to return to the previous  
mode.  
Standard mode:  
Adjustment using the graphic equalizer function  
and the DSF function.  
Entering titles  
You can give a title to the user memory of the  
DSF, G.EQ,VSE and P.EQ that you have adjusted  
yourself.  
Professional mode:  
Adjustment using the VSE function and the para-  
metric equalizer function.  
1. Press A-M button @ to select the adjustment  
When the STD mode is selected, adjustment for  
the professional mode cannot be made. On the  
contrary, when the professional mode is selected,  
adjustment for the STD mode cannot be made.  
For details on functions of each mode, refer to  
the owner’s manual supplied with the DPH910.  
Hereafter the graphic equalizer is referred to as a  
G.EQ, the space equalizer referred to as VSE and  
the parametric equalizer referred to as P.EQ.  
mode in which you want to give a title.  
2. Press BND button ! to select “USR”. “USR”  
will be displayed in the function mode indica-  
tion 9.  
3. Press one of Preset buttons 8 to select the  
user memory to which you want to give a title.  
4. Press TITLE button 2.  
5. Press the right or left side of SEARCH button  
% to move the cursor.  
Operations common to each mode  
6. Press DISP button 0 to select the character  
fonts.  
Output adjustment of auto loudness,  
subwoofer and playback band  
1. Press and hold ADJ button 2 for 1 second or  
longer to switch to the adjustment selection  
display.  
There are capital letters, small letters, num-  
bers, symbols and umlaut available for the  
character.  
7. Turn the Rotary knob $ clockwise or counter-  
clockwise to select the character you want to  
input.  
2. Press the right or left side of SEARCH button  
% to select “SOUND”.  
8. Repeat steps 5 to 7 to input the title.  
3. Press ENT button #.  
9. Press and hold ENT button # for 2 seconds  
or longer to put the title into memory.The title  
input mode is cancelled.  
4. Press the right or left side of SEARCH button  
% to select the adjustment item.  
There are “A.LD LEVEL”, “WOOFER OUT”,  
WOOFER LPF”, “HPF” and “TEST TONE”  
available for the adjustment items.  
STD mode/G.EQ operations  
For details on each adjustment item, refer to  
the owner’s manual supplied with the DPH910.  
Note:  
5. Turn the Rotary knob $ clockwise or coun-  
• The adjustment made in standard mode is not re-  
flected in the adjustment in professional mode. On  
the contrary, the adjustment made in professional  
mode is not reflected in the adjustment in easy  
mode.  
terclockwise to make the adjustment.  
6. Pressing ENT button # returns to the adjust-  
ment selection display.  
7. Press ADJ button 2 to return to the previous  
mode.  
XAZ611  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AC Processor Operations  
G.EQ effect ON/OFF  
While the “G.EQ” indication ¥ is lit in the dis-  
play, the G.EQ effect is set to “ON”.  
STD mode/DSF operations  
DSF effect ON/OFF  
The factory default setting is “ON”.  
1. Press A-M button @ and select “G.EQ.While  
G.EQ” is selected, “G.EQ” blinks in the dis-  
play.  
When the “DSF” indication ¥ is lit in the display,  
the DSF effect is set to “ON”.  
The factory default setting is “ON”.  
1. Press A-M button @ and select “DSF”.  
2. Press DISP button 0.  
2. Press DISP button 0.  
3. Press A-M button @. “G.EQ” in the display is  
3. Press A-M button @. “DSF” in the display lit  
changed from blinking to lit or unlit.  
or unlit.  
* When “G.EQ” is unlit, the G.EQ effect is set to  
OFF.  
Note:  
• If the G.EQ effect is set to OFF, the adjustment  
made in “G.EQ operations” is not reflected in the  
music source.  
When “DSF” is unlit, the DSF effect is set to OFF.  
Note:  
• If the DSF effect is set to OFF, the adjustment made  
in “DSF operations” is not reflected in the music  
source.  
Setting the listening position menu  
1. Press A-M button @ and select “DSF”.  
Selecting a G.EQ menu  
1. Press A-M button @ and select “G.EQ”.  
2. Press the right or left side of SEARCH button  
2. Press BND button ! to select “BASC” (ba-  
sic).BASC” is displayed in the function mode  
indication 9 in the display.  
% to set the listening position type.  
There are FULL SEAT, FRONT-RIGHT,  
FRONT-LEFT, FRONT (only front seats),  
REAR (only rear seats) and PASS available  
for the listening position types.  
3. Press one of Direct buttons 8 and select the  
desired G.EQ menu.  
To select the user memory, press BND button  
! to select “USR” and press one of Direct but-  
tons 8.  
The factory default setting is “FULL SEAT”.  
Making fine adjustment of the  
listening position  
1. Upon completion of setting the listening posi-  
Editing/storing a G.EQ menu (User  
memory)  
1. Select a G.EQ menu which you want to edit  
on the basis of.  
tion, press ENT button #.  
2. Press the right or left side of SEARCH button  
% to select “BALANCE” or “FADER.The se-  
lected item blinks.  
2. Press and hold ADJ button 2 for 1 second or  
longer.  
3. Turn the Rotary knob $ clockwise or counter-  
3. Press the right or left side of SEARCH button  
clockwise to adjust the balance and the fader.  
% to select the frequency to be adjusted.  
4. Press ENT button # to return to the DSF  
There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz,  
3kHz and 12kHz available for the adjustment  
frequency.  
mode.  
Selecting a sound field menu  
1. Press A-M button @ and select “DSF.DSF”  
For details on each adjustment item, refer to  
the owner’s manual supplied with the DPH910.  
blinks in the display.  
4. Turn the Rotary knob $ clockwise or counter-  
clockwise to make the adjustment.The adjust-  
ment range is from –6dB to +6dB.  
2. Press BND button ! to select “BSC1” (ba-  
sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2”  
is displayed in the function mode indication  
9 in the display.  
5. Repeat steps 3 to 4 to complete the adjust-  
ment and press ADJ button 2.  
3. Press one of Direct buttons 8 and select the  
6. Press and hold one of Direct buttons 8 for 2  
desired sound field menu.  
seconds or longer to store the edited contents.  
To select the user memory, press BND button  
! to select “USR” and press one of Direct but-  
tons 8.  
You can give a title to the user memory. For the  
inputting method of titles, refer to the subsec-  
tion “Entering titles” in section “Operations  
common to each mode”.  
24  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AC Processor Operations  
Selecting an VSE menu  
Editing/storing a sound field menu  
(User memory)  
1. Press A-M button @ and select “VSE”.  
1. Select a sound field menu which you want to  
edit on the basis of.  
2. Press BND button ! to select “BASC” (ba-  
sic).BASC” is displayed in the function mode  
indication 9 in the display.  
2. Press and hold ADJ button 2 for 1 second or  
longer.  
3. Press one of Direct buttons 8 and select the  
desired VSE menu.  
3. Press the right or left side of SEARCH button  
% to select the item to be adjusted.  
To select the user memory, press BND button  
! to select “USR” and press one of Direct but-  
tons 8.  
There are “EFFECT”, “DELAY”, “REAR MIX”,  
REV.TIME” or “ROOM SIZE” and “HIGH” or  
LIVENESS” available for the items to be ad-  
justed.  
Editing/storing an VSE menu (User  
memory)  
1. Select an VSE menu which you want to edit  
on the basis of.  
For details on each adjustment item, refer to the  
owner’s manual supplied with the DPH910.  
4. Turn the Rotary knob $ clockwise or coun-  
terclockwise to make the adjustment.  
2. Press and hold ADJ button 2 for 1 second or  
longer.  
5. Repeat steps 3 to 4 to complete the adjust-  
ment and press ADJ button 2.  
3. Press the right or left side of SEARCH button  
% to select the item to be adjusted.  
6. Press and hold one of Direct buttons 8 for 2  
seconds or longer to store the edited contents.  
There are “DIFFUSE”, “CARWIDTH” and “CAR  
LENG” available for the items to be adjusted.  
You can give a title to the user memory. For the  
inputting method of titles, refer to the subsec-  
tion “Entering titles” in section “Operations  
common to each mode”.  
For details on each adjustment item, refer to the  
owner’s manual supplied with the DPH910.  
4. Turn the Rotary knob $ clockwise or counter-  
clockwise to make the adjustment.The adjust-  
ment range is from 1 to 10 for each item.  
Professional mode/VSE operations  
5. Repeat steps 3 to 4 to complete the adjust-  
Note:  
ment and press ADJ button 2.  
• The adjustment made in professional mode is not  
reflected in the adjustment in easy mode. On the  
contrary, the adjustment made in easy mode is not  
reflected in the adjustment in professional mode.  
6. Press and hold one of Direct buttons 8 for 2  
seconds or longer to store the edited contents.  
You can give a title to the user memory. For the  
inputting method of titles, refer to the subsec-  
tion “Entering titles” in section “Operations  
common to each mode”.  
VSE effect ON/OFF  
While the “VSE” indication ¥ is lit in the display,  
the S.EQ effect is set to “ON”.  
Professional mode/P.EQ operations  
P.EQ effect ON/OFF  
While the “P.EQ” indication ¥ is lit in the display,  
the P.EQ effect is set to “ON”.  
The factory default setting is “ON”.  
1. Press A-M button @ and select “VSE”.  
2. Press DISP button 0.  
3. Press A-M button @. “VSE” in the display lit  
or unlit.  
The factory default setting is “ON”.  
When “VSE” is unlit, the VSE effect is set to  
OFF.  
1. Press A-M button @ and select “P.EQ”.  
2. Press DISP button 0.  
Note:  
• If theVSE effect is set to OFF, the adjustment made  
in “VSE operations” is not reflected in the music  
source.  
3. Press A-M button @. “P.EQ” in the display is  
changed from blinking to lit or unlit.  
When “P.EQ” is unlit, the P.EQ effect is set to OFF.  
Note:  
• If the P.EQ effect is set to OFF, the adjustment  
made in “P.EQ operations” is not reflected in the  
music source.  
XAZ611  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: Be sure to read this chapter referring to the front  
diagrams of chapter “3.CONTROLS” on page 5  
(unfold).  
AC Processor Operations  
Selecting a P.EQ menu  
Digital Radio /  
DAB Operations  
1. Press A-M button @ and select “P.EQ.P.EQ”  
blinks in the display.  
2. Press BND button ! to select “BASC” (ba-  
sic).BASC” is displayed in the function mode  
indication 9 in the display.  
DAB control function  
When a CeNET cable is used to connect a DAB  
(sold separetely), all functions can be operated.  
3. Press one of Direct buttons 8 and select the  
desired P.EQ menu.  
To select the user memory, press BND button  
! to select “USR” and press one of Direct but-  
tons 8.  
Listening to the DAB station  
1. Press FNC button 3 to select DAB mode.  
2. When the unit receives a DAB station, the  
display changes in the following order:  
Editing/storing a P.EQ menu (User  
memory)  
Frequency channel service label  
1. Select a P.EQ menu which you want to edit  
on the basis of.  
2. Press and hold ADJ button 2 for 1 second or  
longer.  
3. Press the right or left side of SEARCH button  
% to select the item to be adjusted.  
Switching displays  
Press the DISP button for 1 second during the  
Main (service label) display to select Main (ser-  
vice label) or Sub (PTY).  
There are correction channel, correction band,  
selection of the centre frequency, gain adjust-  
ment and selection of the Q-curve available  
for the items to be adjusted.  
Note:  
For details on each adjustment item, refer to the  
owner’s manual supplied with the DPH910.  
• The display shown in the normal reception mode  
and the preset reception mode is the same when  
a DAB station is received.  
4. Turn the Rotary knob $ clockwise or counter-  
clockwise to make the adjustment.  
5. Repeat steps 3 to 4 to complete the adjust-  
3. When the unit does not receive a DAB sta-  
tion, the display changes in the following or-  
der:  
ment and press ADJ button 2.  
6. Press and hold one of Direct buttons 8 for 2  
seconds or longer to store the edited contents.  
–Normal reception mode–  
You can give a title to the user memory. For the  
inputting method of titles, refer to the subsec-  
tion “Entering titles” in section “Operations  
common to each mode”.  
–Preset reception mode–  
Notes:  
• The number of programmes and broadcasting  
times depend on the DAB stations.  
• When the strength of DAB signals is weak, audio  
output is muted.  
26  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Radio / DAB Operations  
Manual memory  
Seek tuning  
1. Press FNC button 3 to select DAB mode.  
The main unit has a manual memory function  
for DAB programmes. Up to 18 programmes  
(6 programmes each) can be preset in the pre-  
set buttons.  
2. Press and hold right or left for 1 second or  
longer using SEARCH button %.  
[M1], [M2] and [M3]  
1. Press FNC button 3 to select DAB mode.  
SEEK” appears in the display.  
2. Press BND button ! to select any one shown  
above.  
3. “DAB” lights up in the display when the main  
unit receives a DAB station.  
3. Press the right or left SEARCH button % to  
select a desired programme.  
The main unit stops the seek tuning when it  
cannot find a DAB station. The display returns  
to the previous mode.  
4. Press and hold one of Preset buttons (1 to 6) 8  
for 2 seconds or longer to store the programme.  
Note:  
Manual tuning  
1. Press FNC button 3 to select DAB mode.  
• The interrupt programme (PTY or INFO) cannot  
be written into a manual memory.  
2. Press and hold BND button  
!
for 1 second or  
Recalling a preset programme  
longer. “MANUlights up in the display  
.
1. Press FNC button 3 to select DAB mode.  
3. Press the right or left SEARCH button % to  
select a station.  
2. Press BND button !. Each time you press  
BND button !, the display changes in the fol-  
lowing order:  
If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
[M1] [M2] [M3] [M1]...  
3. Press one of Preset buttons 8 to recall a  
Switching programmes  
1. Press FNC button 3 to receive a DAB sta-  
preset programme.  
Note:  
tion.  
• Press and hold Preset button 8 for 2 seconds or  
longer to store the programme currently being re-  
ceived. (Manual memory)  
2. Press the right or left SEARCH button % to  
switch programmes in the DAB station.  
Note:  
AF function  
• The programme name may be the same depending  
on DAB programmes.  
The AF function switches to a different frequency  
on the same network in order to maintain opti-  
mum reception.  
Programme scan  
This function scans through each receivable  
programme in a DAB station being received for  
10 seconds sequentially.This is useful when you  
want to search for a desired programme.  
The factory default setting is “ON”  
If the reception of the current broadcast station  
deteriorates, “SEARCHING FOR SAME STATION”  
or “SEARCH” appears in the display and the radio  
searches for the same programme on another fre-  
quency.  
1. Press FNC button 3 to receive a DAB station.  
2. Perform the following operation depending on  
the connected model.  
For details on “AF function”, refer to the section  
RDS operation” of each owner’s manual.  
Press SCN button 4. “SCAN” lights up and  
the unit starts scanning each programme for  
10 seconds sequentially. Each time the main  
unit scans, the programme name is shown in  
the display.  
Switching OFF the AF function  
Switching ON the AF function  
AF function between RDS and DAB  
When the same programme is broadcast by both  
RDS and DAB, and this function is ON, the main  
unit switches to receiving the broadcast with the  
better reception automatically.  
3. To stop programme scan when a desired  
programme is tuned in.  
Press SCN button 4.  
XAZ611  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Radio / DAB Operations  
TA (Traffic Announcement)  
InTA standby mode, when a traffic announcement  
broadcast starts, the traffic announcement broad-  
cast is received as top priority regardless of the  
function mode.Traffic programme (TP) automatic  
tuning is also possible.  
Information select  
This is a function for selecting INFORMATION  
ON or OFF in Information interrupt mode.  
You can set ON up to 6 information items.  
You can select any of the 6 items below:  
INFORMATION item  
This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
DAB or RDS broadcast station being received has  
traffic announcement programmes.  
For details on “TA”, refer to the section “RDS op-  
eration” of each owner’s manual.  
ENGLISH  
TRAVEL  
WARNING  
NEWS  
Contents  
TRANSPORT FLASH  
WARNING / SERVICE  
NEWS FLASH  
WEATHER  
EVENT  
AREA WEATHER FLASH  
EVENT ANNOUNCEMENT  
SPECIAL EVENT  
Setting TA standby mode  
Cancelling TA standby mode  
Searching for a TP station  
SPECIAL  
Notes:  
1. Perform the following operation depending on  
the connected model.  
• If a TP station is not received, the main unit stops  
the search operation.  
Press and hold ADJ button 2 for 1 second or  
longer.  
• “TP” may be lit in the display when a TP broadcast  
is transmitted from an RDS station. In this case,  
press ISR button 9 to perform TP seek tuning.  
Press ISR button 9 again to return to the previ-  
ous mode.  
2. Press the right or left SEARCH button % to  
select “INFO SEL”, then push ENT button #  
to enter “INFO SEL” mode.  
3. Press the right or left SEARCH button % to  
select an information item.You can select any  
of 6 items:  
INFO (Announcement)  
In INFO standby mode, when the selected  
announcement programme starts, the main unit  
switches to the selected announcement  
programme automatically.  
4. Perform the following operation depending on  
the connected model.  
Turn the Rotary knob $ clockwise or  
counterclock wise to set the information item  
for ON or OFF.  
5. Press ADJ button 2 to return to the previous  
Setting INFO standby mode  
display.  
If you press and hold ISR button 9 for 1 second  
or longer, “INFO” lights in the display and the main  
unit is set into INFO standby mode until the se-  
lected announcement is broadcast. When the  
selected announcement broadcast starts, the  
announcement item appears in the display. If you  
press and hold ISR button 9 for 1 second or  
longer while the selected announcement broad-  
cast is being received, the selected announce-  
ment broadcast reception is cancelled and the  
main unit goes into INFO standby mode.  
PTY  
This function enables you to listen to the selected  
programme type, irrespective of the function mode.  
One common PTY can be selected for DAB or RDS.  
Of DAB PTY and RDS PTY, the PTY which is re-  
ceived earlier takes priority over the other.  
PTY broadcasts are not yet available in all countries.  
In INFO standby mode, INFO stations have priority  
over PTY stations.  
In TA standby mode, TP stations have priority over  
PTY stations.  
For details on “PTY”, refer to the section “RDS  
operation” of each owner’s manual.  
Cancelling INFO standby mode  
To cancel INFO standby mode, press and hold  
ISR button 9 for 1 second or longer.  
Setting PTY standby mode  
28  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Radio / DAB Operations  
DVD operation  
Cancelling PTY standby mode  
Cancelling a PTY interrupt broadcast  
Selecting PTY  
DVD deck control  
When an optional DVD deck (sold separately) is  
connected through the CeNET cable, this unit  
controls some DVD deck functions.  
PTY seek  
Listening to DVD  
PTY preset memory  
Press FNC button 3 and select the DVD mode.  
Adjust the volume  
Emergency broadcast  
Turning the Rotary Knob $ clockwise increases  
the volume; turning it counterclockwise de-  
creases the volume.  
When an emergency broadcast is received, all  
the function mode operations are stopped.  
ALARM” appears in the display and the emer-  
gency broadcast can be heard.  
Other operations refer to DVD deck’s owner’s  
manual.  
For details onEmergency broadcast”, refer to the  
section “RDS operation” of each owner’s manual.  
Cancelling an emergency broadcast  
Switching the PTY and INFO display  
language  
You can select one of 2 languages (English or  
French) for the PTY and INFO shown in the dis-  
play.  
The factory default setting is “English”.  
For details on “Switching the PTY and INFO dis-  
play language”, refer to the section “RDS opera-  
tion” of each owner’s manual.  
Volume setting of TA, INFO, emergency  
broadcast (ALARM) and PTY  
The volume for TA, INFO, ALARM and PTY in-  
terrupts can be set during TA, INFO, ALARM and  
PTY interrupt. Perform the following operation  
depending on the connected model.  
The factory default setting is “15”.  
During a TA, INFO, ALARM or PTY interrupt,  
turn the Rotary knob $ clockwise or coun-  
terclockwise to set the volume to a desired  
level (0 to 33).  
When the TA, INFO, ALARM or PTY interrupt ends,  
the volume returns to the level it had before the  
interrupt.  
XAZ611  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not  
turn on.  
Fuse is blown.  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
(No sound is  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
No sound output  
when operating  
the unit with  
amplifiers or  
power antenna  
attached.  
Power antenna lead is  
shorted to ground or  
excessive current is required  
for remote-on the amplifiers  
or power antenna.  
1. Turn the unit off.  
2. Remove all wires attached to the power antenna  
lead. Check each wire for a possible short to  
ground using an ohm meter.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the amplifiers  
turn off before all wires are attached, use an  
external relay to provide remote-on voltage  
(excessive current required).  
Nothing happens The microprocessor has  
when buttons are malfunctioned due to noise,  
Turn off the power, then press OPEN button 1 and  
remove the DCP.  
Press the reset button for about 2 seconds with a thin  
pressed.  
etc.  
rod.  
Reset button  
Display is not  
accurate.  
DCP or source unit  
connectors are dirty.  
Wipe the dirt off with a soft cloth moistened with  
cleaning alcohol.  
Sound quality is  
poor.  
Playback head is dirty.  
Use a cleaning tape, etc., to clean the head.  
DOLBY NR button 6 is not  
pressed.  
When listening to a tape recorded with Dolby NR,  
press DOLBY NR button 6.  
30  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Cause  
Error Display  
ERROR 1  
Measure  
Tape cannot be played due to defective  
tape such as cut tape.  
Eject the tape then replace it with a new  
one.  
ERROR 2  
ERROR 4  
Tape is caught and cannot be played.  
Tape mode cannot be detected.  
Remove the caught or wound tape.  
This is a failure of tape mechanism and  
consult your store of purchase.  
ERROR 8  
ERROR 2  
ERROR 3  
ERROR 6  
ERROR H  
Tape is caught and cannot be ejected.  
Eliminate the reason for which the tape is  
caught.  
A CD inside the CD changer is not loaded. This is a failure of CD changer’s mecha-  
nism and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when the temperature in the MD Lower the surrounding temperature and  
changer is too high and playback has  
been stopped automatically.  
wait for a while to cool off MD changer.  
ERROR 2  
ERROR 3  
ERROR 6  
An MD inside the MD changer is not loaded. This is a failure of MD changer’s mecha-  
nism and consult your store of purchase.  
An MD inside the MD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
An MD inside the MD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when a non-recorded MD is  
loaded in the MD changer.  
Load a pre-recorded MD in the MD  
changer.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
XAZ611  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. SPECIFICATIONS  
FM Tuner  
Audio  
Frequency Range:  
Maximum Power Output:  
87.9 MHz to 107.9 MHz  
180 W (45 W × 4 ch) (EIAJ)  
Usable Sensitivity:  
9 dBf  
Continuous Average Power Output:  
17 W × 4, into 4 , 20 Hz to 20 kHz, 1%THD  
50dB Quieting Sensitivity:  
15 dBf  
Bass Control Action (30 Hz):  
+15 dB / -12dB  
Alternate Channel Selectivity:  
70 dB  
MID Contorl Action (1kHz):  
±12dB  
Stereo Separation (1 kHz):  
35 dB  
Treble Control Action (10 kHz):  
±12 dB  
Frequency Response (±3 dB):  
30 Hz to 15 kHz  
Line Output Level (0VU A/C):  
1.8 V  
AM Tuner  
General  
Frequency Range:  
Power Supply Voltage:  
530 kHz to 1710 kHz  
14.4 V DC (10.8 to 15.6 V allowable),  
negative ground  
Usable Sensitivity:  
25 µV  
Current Consumption:  
Less than 15 A  
Tape Deck  
Wow & Flutter (WRMS):  
0.06%  
Speaker Impedance:  
4 (4 to 8 allowable)  
Weight / Source unit:  
3.52 lb. (1.6 kg)  
Channel Separation (1 kHz):  
45 dB  
Weight / Remote control unit:  
1 oz. (30 g) (including battery)  
Frequency Response (±3 dB):  
Dimensions / Source unit:  
120 µs (normal):  
30 Hz to 18 kHz  
7" (Width) × 2" (Height) × 6-1/8" (Depth)  
[178 (L) 50 (H) 155 (P) mm]  
70 µs (CrO2, FeCr, Metal):  
30 Hz to 20 kHz  
Dimensions / Remote control unit:  
1-3/4" (Width) 4-5/16" (Height) 1-1/8" (Depth)  
[44 (W) 110 (H) 27 (D) mm]  
Signal to Noise Ratio, 70 µs (CrO2, FeCr, Metal)  
Dolby NR OFF:  
58 dB  
Dolby B NR:  
67 dB  
Notes:  
Specifications comply with EIA Standards.  
Specifications and design are subject to change without notice for further improvement.  
32  
XAZ611  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Digital Digital Camera DCA1620 User Manual
Continental Electric Rice Cooker CE23211 User Manual
Cooper Lighting Indoor Furnishings AR60T User Manual
Craftsman Tiller 91729239 User Manual
Crate Amplifiers Stereo Amplifier VTX200 User Manual
Creative Modem DE5773 User Manual
Crown Audio Stereo Amplifier MA 602 User Manual
Delta Electronics Power Supply S48SP User Manual
Dukane Projector 8412 User Manual
GE Monogram Refrigerator ZISW360DM User Manual