Clarion Car Video System VRX765VD User Manual

Owner’s manual & Installation manual  
Mode d’emploi et manuel d’installation  
Manual de instrucciones y de instalación  
RADIO/DVD MULTIMEDIA CENTER WITH  
CeNET CONTROL  
CENTRE MULTIMÉDIA DVD/RADIO AVEC  
COMMANDE CeNET  
CENTRO DE MULTIMEDIA DE DVD/RADIO  
CON CONTROL CeNET  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing the Clarion VRX765VD.  
* This owner’s manual is for the VRX765VD.  
* Please read this manual thoroughly before operating this equipment.  
* After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
* Check the contents of the enclosed warranty card and keep it carefully with this manual.  
* This manual includes the operating procedures of the 2-ZONE control, iPod control, CD changer, DVD  
changer, TV tuner, Satellite Radio, 5.1ch surround decoder. The CD changer, DVD Changer, TV tuner and  
5.1ch surround decoder have their own manuals, but no explanations for operating them are described.  
Contents  
1. FEATURES.................................................................................................................... 3  
EXPANDING SYSTEMS................................................................................................ 3  
2. PRECAUTIONS ............................................................................................................. 4  
3. CONTROLS/COMMANDES/CONTROLES................................................................... 5  
4. NOMENCLATURE......................................................................................................... 6  
Names of Buttons........................................................................................................... 6  
5. OUTLINE OF BUTTON AND TOUCHKEY OPERATION ............................................. 7  
6. REMOTE CONTROL ................................................................................................... 13  
Functions of Remote Control Unit Buttons................................................................... 14  
7. DCP.............................................................................................................................. 17  
8. CAUTIONS ON HANDLING ........................................................................................ 18  
Liquid crystal panel/Generalities................................................................................... 18  
Cleaning ....................................................................................................................... 18  
Handling Discs ............................................................................................................. 19  
9. DVD VIDEO SYSTEM.................................................................................................. 20  
DVD Video Features .................................................................................................... 20  
Discs............................................................................................................................. 21  
About the registered marks etc. ................................................................................... 21  
10. OPERATIONS.............................................................................................................. 22  
Basic Operations.......................................................................................................... 22  
Radio Operations ......................................................................................................... 31  
DVD Video Player Operations...................................................................................... 33  
Other Functions............................................................................................................ 46  
11. OPERATIONS OF ACCESSORIES............................................................................. 48  
iPod Operations............................................................................................................ 48  
VISUAL Operations...................................................................................................... 51  
CD Changer Operations............................................................................................... 51  
DVD Changer Operations ............................................................................................ 53  
TV Operations .............................................................................................................. 53  
Satellite Radio Operations............................................................................................ 56  
5.1 ch Surround Decoder Operations........................................................................... 59  
12. IN CASE OF DIFFICULTY........................................................................................... 63  
13. ERROR DISPLAYS...................................................................................................... 65  
14. SPECIFICATIONS ....................................................................................................... 66  
INSTALLATION AND WIRE CONNECTION MANUAL.................................................... 67  
1. BEFORE STARTING................................................................................................ 67  
2. PACKAGE CONTENTS ........................................................................................... 67  
3. GENERAL CAUTIONS............................................................................................. 67  
4. CAUTIONS ON INSTALLATION.............................................................................. 68  
5. INSTALLING THE MAIN UNIT................................................................................. 69  
6. REMOVING THE MAIN UNIT .................................................................................. 71  
7. CAUTIONS ON WIRING .......................................................................................... 71  
8. WIRE CONNECTION............................................................................................... 72  
9. SAMPLE SYSTEM................................................................................................... 75  
2
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
1. FEATURES  
2. PRECAUTIONS  
Fully-Motorized 7" Widescreen LCD  
Touch Panel Control  
DVD Video/CD-DA/MP3/WMA/Video CD  
Play Capability  
RCA 6(+2)-Channel (2-zone) Output  
Built-in 50 W × 4 Amplifier  
CD-R/CD-RW/DVD-R/DVD-RW Compatible  
5.1 Channel Decoder for DTS and Dolby  
Digital Ready  
Optical Digital Output  
2-ZONE Control  
iPod® Control  
WARNING  
For your safety, the driver should not watch the DVD video/TV/VTR or operate the controls  
while driving. Please note that watching and operating the DVD video/TV/VTR while driving are  
prohibited by law in some countries. Also, while driving, keep the volume to a level at which  
external sounds can be heard.  
CeNET with Balanced Audio Line  
Transmission and Dynamic Noise  
Canceling  
iPod” is a trademark of Apple Computer,  
1. When the inside of the car is very cold and the  
player is used soon after switching on the  
heater, moisture may form on the disc (DVD/  
CD) or the optical parts of the player and  
proper playback may not be possible. If  
moisture forms on the disc (DVD/CD), wipe it  
off with a soft cloth. If moisture forms on the  
optical parts of the player, do not use the  
player for about one hour. The condensation  
will disappear naturally allowing normal  
operation.  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user  
is encouraged to consult the dealer or an  
experienced radio/TV technician for help.  
Inc.,registered in the U.S. and other countries.  
INFORMATION FOR USERS:.  
EXPANDING SYSTEMS  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY AND WILL VIOLATE FCC  
APPROVAL.  
Expanding audio features  
Satellite Radio  
Expanding visual features  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
CCD Camera  
TV Tuner  
3. This unit uses a precision mechanism. Even  
in the event that trouble arises, never open  
the case, disassemble the unit, or lubricate  
the rotating parts.  
CeNET DVD Changer  
CeNET CD Changer  
iPod  
4. TV broadcast reception (when the optional TV  
tuner is connected)  
VTR etc.  
When receiving the TV broadcast, the  
strength of the signals changes since the car  
is moving, so in some cases it may not be  
possible to receive clear pictures.  
• TV signals are strongly linear, so reception  
is affected by buildings, mountains and  
other obstacles.  
• Such external factors such as electric train  
lines, a high voltage lines, and signal  
devices may disturb the picture or cause  
noise.  
Note:  
The items listed outside of the  
frames are the commercial  
products generally sold.  
* If the reception is poor, switch to a station with  
good reception.  
Rear monitor  
5. This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide  
4-Channel Amplifier  
reasonable protection against harmful  
Wireless  
interference in a residential installation. This  
equipment generates, uses, and can radiate  
radio frequency energy and, if not installed  
and used in accordance with the instructions,  
may cause harmful interference to radio  
communications. However, there is no  
5.1 ch Surround  
Decoder  
Head phone  
Be sure to unfold and read the next page.  
Expanding features for the rear seats  
Veuillez déplier et vous référer à la page suivante.  
Expanding sound features  
Cerciórese de desplegar y de leer la página siguiente.  
3
4
VRX765VD  
Download fromVWRXw76w5.VSDomanuals.com. All Manuals Search And Download.  
3. CONTROLS/COMMANDES/  
CONTROLES  
4. NOMENCLATURE  
Names of Buttons  
Note:  
[iPod] button  
[
]
iPod  
Be sure to read this chapter while referring to the  
front diagrams for chapter “3.CONTROLS” on  
page 5 (unfold).  
• Press this button to switch to the iPod mode.  
[
]
CONT.  
[CONT.] button  
• Press this button to show/hide the key pad on  
the menu screen of DVD video/Video CD.  
[
]
MENU  
[E], [e] buttons  
• Use these buttons to increase/decrease the  
volume.  
[MENU] button  
• Press this button to show the menu screen of  
DVD video/Video CD. Keep pressing this  
button more than 1 second to show the top  
menu screen of DVD video.  
[p] button  
• Press this button to enter the play pause  
mode in the DVD PLAYER/iPod/changer  
modes. Press the button again to resume  
playback.  
[ADJ] button  
• Press this button to enter/exit the ADJUST  
mode to change the settings.  
[ ][e]  
E
• Keep pressing this button more than 1 second  
to mute the sound in the DVD PLAYER/iPod/  
changer modes.  
• Press this button to mute the sound in the  
TUNER/Satellite Radio/TV/VISUAL modes.  
Keep pressing this button more than 1 second  
switches the liquid crystal panel to a composite  
screen to lock the monitor (To enable this  
function, go to the GENERAL menu (within the  
ADJUST menu), and use the [CONNECT] key  
to select “NAVI” or “OTHER”).  
[
]
P
[
]
SRC  
[SRC] button  
• Press this button to turn on the power. Keep  
pressing this button more than 1 second to  
turn off the power.  
[
]
]
ISR  
Sensor  
[MONI] button  
• Press this button to enter/exit the Monitor  
Adjust mode.  
• Keep pressing this button more than 1 second  
to turn off the back light of the liquid crystal  
panel.  
[
MONI  
• When the liquid crystal panel closed, press  
this button to change to the next mode such  
as TUNER mode.  
• When the liquid crystal panel open, press this  
button to display the Source menu screen to  
switch the mode.  
[
]
BAND  
[
]
ADJ  
[ISR] button  
• Use this button to enter/exit the ISR (Instant  
Station Recall) standby mode.  
• Keep pressing this button more than 2  
seconds to store the current station into ISR  
memory in the radio mode.  
[R], [F] buttons  
• Use these buttons to change to the previous/  
next preset station in the TUNER/Satellite  
Radio/TV modes.  
• Use these buttons to select a track in the CD,  
Video CD, MP3/WMA, iPod and CD changer  
modes.  
* The [ISR] button is disabled when the SUB  
zone is selected in the 2-ZONE mode.  
• Use these buttons to select a chapter in the  
DVD video and DVD changer modes.  
[o] (EJECT) button  
• Use this button to eject the disc set in this unit.  
[BAND] button  
[P] (OPEN) button  
• Use this button to open/close the liquid crystal  
panel.  
• Press this button to switch the receiving  
bands for TUNER/Satellite Radio/TV modes.  
Keep pressing this button more than 1 second  
to switch the Seek/Manual tuning modes.  
• Use this button to move to the first track in the  
CD, Video CD and iPod modes, or the first  
chapter in the DVD video mode.  
• Keep pressing this button more than 2  
seconds so that the liquid crystal panel is  
positioned horizontally when the liquid crystal  
panel is open (Air Conditioner Operation  
mode).  
• When the liquid crystal panel closed, Keep  
pressing this button more than 5 seconds to  
perform the panel calibration function to  
memorize the maximum angle of the liquid  
crystal panel.  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
*The control panel can be detached to prevent theft. For details, see the pages entitled “7. DCP”.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
* Le panneau de commande peut être détaché de l’unité pour éviter tout vol. Pour plus d’informations,  
reportez-vous au chapitre “7. CLAVIER DE COMMANDE AMOVIBLE”.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
* Puede extraer el panel de control para evitar que lo roben. Para obtener más información, consulte las páginas  
del apartado “7. Panel de CONTROL DESMONTABLE (DCP)”.  
• Use this button to move to the next folder in  
the MP3/WMA mode.  
• Use this button to switch to the next disc in the  
changer modes.  
• Keep pressing this button more than 1 second  
to play all tracks in the iPod mode.  
5
Download from Www.Somanuals.com. All M6anuals Search And Download.  
VRX765VD  
VRX765VD  
5. OUTLINE OF BUTTON AND  
TOUCHKEY OPERATION  
Turing the power on  
2  
(OPEN)  
Engine ON  
position  
When the liquid crystal panel closed  
1  
When the liquid crystal panel open  
System check  
The CeNET format utilized on this unit is  
provided with a system check function. When  
the system check function is performed  
under the following conditions, the power is  
automatically turned off. Press the [SRC]  
button again.  
•When power is first turned on after initial  
installation.  
•When an external device is connected or  
disconnected.  
or  
•When Reset button is pressed.  
In addition to the above conditions, the  
system check function can be performed  
from the GENERAL menu in the ADJUST  
mode.  
You can change the media  
sources.  
7
VRX765VD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER mode operation  
(Source menu)  
3  
(Key Pad screen)  
4  
(Preset List screen)  
Enters desired  
frequency.  
1
0
7
9
ENT 5  
Selects desired  
station.  
(Title input screen)  
Note:  
1:The operation button is [ P ](OPEN) button  
in the description of operation per mode.  
2:External equipment not connected with  
CeNET is not displayed.  
3:When the TUNER mode is currently selected,  
touch [Back] key.  
4:The operation key is [Search] key in the  
description of operation per mode.  
5:This shows an example entering 107.9 MHz.  
8
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video mode operation  
6  
(DVD PLAYER mode screen)  
(Source menu)  
Screen during DVD mode  
when automobile moving.  
(Option menu)  
(DVD SETUP menu)  
Note:  
6:When displaying movies in DVD video mode, touching the screen surface will cause  
the DVD PLAYER mode screen to be displayed.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Adjusting audio feature settings  
(From any screen)  
When a 5.1 ch Surround  
Decoder is connected  
(ADJUST mode menu)  
(AUDIO menu)  
(AUDIO EXT. menu)  
(BAL/FAD)  
(BAL/FAD screen)  
10  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
(AUDIO menu)  
(AUDIO EXT. menu)  
(STATUS)  
(SPEAKER SEL)  
(STATUS screen)  
(SPEAKER SEL menu)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Adjusting the other system settings  
(From any screen)  
(ADJUST mode menu)  
(GENERAL menu)  
(MONITOR menu)  
(CLOCK)  
(CLOCK screen)  
(MONI ADJ)  
(Monitor Adjust screen)  
(Hour, Minute, am./pm.)  
Bright  
Color  
Hue  
Dimmer  
Switched by touching this key repeatedly.  
12  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
6. REMOTE CONTROL  
Remote control unit  
Signal transmitter  
Operating range: 30˚ in all directions  
[
]
]
BAND  
[
[
]
MUTE  
[
]
SRC  
VOLUME  
[
]
[
]
P.TIME  
0-9  
[
]
]
]
DISC SEL  
[
],[  
[
[
]
]
SEARCH MODE  
[
MENU  
RTN  
[
]
TOP MENU  
[
]
]
SET UP  
[
],[  
]
[
ENT  
[
[
]
ISR  
[
[
]
2-ZONE  
]
[
]
PBC  
SCN  
]
[
]
RDM  
RPT  
[
]
]
[
[
]
AUDIO  
SLOW  
]
[
ANGLE  
SUB TITLE  
Inserting the Batteries  
1. Slide the rear cover in the direction of the  
arrow, and remove it.  
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries  
bundled with the remote control unit in the  
directions shown in the figure, then close the  
rear cover.  
AA (SUM-3, IECR-6/1.5V)  
Batteries  
Note:  
Using batteries improperly can cause them to  
explode. Take note of the following points:  
When replacing batteries, replace both batteries  
with new ones.  
Rear cover  
Do not short-circuit, disassemble or heat batteries.  
Do not dispose of batteries into fire or flames.  
Dispose of spent batteries properly.  
Rear side  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Functions of Remote Control Unit Buttons  
You can use the remote control unit to control the VRX765VD. When the 2-ZONE function is ON, the  
controls work upon the selected zone.  
[SCN] button  
Shared modes  
• Press to perform preset scans in the TUNER  
and TV/Satellite Radio modes. For the Satellite  
Radio mode, keep pressing more than 1  
second.  
• Press to perform category scans in the Satellite  
Radio mode.  
• Keep pressing more than 1 second to perform  
the auto store operation in the TUNER and TV/  
Satellite Radio modes.  
[SRC] button  
• Press this button to turn on the power. Keep  
pressing this button more than 1 second to turn  
off the power.  
• Press this button to switch the modes such as  
TUNER mode, DVD PLAYER mode.  
[VOLUME] buttons  
• Increase and decrease volume.  
[ISR] button  
[MUTE] button  
• Recall ISR radio station in memory.  
• Keep pressing more than 2 seconds to store  
current station into ISR memory (radio mode  
only).  
• Turns mute on and off.  
[RTN] button  
• Returns to the previous screen from the list or  
menu screens.  
• Displays the menu screen when playing a  
Video CD.  
[RDM] button  
• Press to switch between TV mode and VTR  
mode.  
[2-ZONE] button  
• Keep pressing more than 1 second to turn on  
the 2-ZONE, and keep pressing again to turn  
off 2-ZONE.  
DVD PLAYER mode  
[BAND] button  
• Press to return to the first chapter in DVD video  
mode.  
• Press to switch between the MAIN zone and  
SUB zone when the 2-ZONE is turned on.  
• Press to return to the first track in CD and Video  
CD modes when playing back.  
• Press to move to the next folder when more  
than 1 folder are played back in MP3/WMA  
mode.  
TUNER/TV/Satellite mode  
[BAND] button  
• Switches reception band.  
• Keep pressing more than 1 second to switch  
the Seek/Manual tuning modes.  
[P.TIME] button  
• Press to turn on and off the playtime display in  
the DVD video/Video CD modes.  
[0 - 9] button  
• Use in the Key Pad screen to set the radio  
frequency or TV/Satellite Radio channels.  
• Use to select the preset number in the Preset  
List screen.  
[6] button  
• Press to play or pause video and audio media.  
• Keep pressing more than 1 second to stop  
video playback in DVD video.  
[DISC SEL] button  
[0 - 9] buttons  
• Press to show/hide the Preset List screen.  
• Press to enter DVD video chapters/titles in the  
Key Pad screen.  
[SEARCH MODE] button  
• Press to show/hide the Key Pad screen.  
• Press to set the track/folder number of the CD,  
Video CD or MP3/WMA in the Key Pad screen.  
[ENT] button  
• Press to fix the entered data in the Key Pad  
screen.  
[DISC SEL] button  
• Press to show/hide the Track List screen in the  
CD mode.  
• Press to show/hide the Folder List screen in the  
MP3/WMA mode.  
[r], [f] buttons  
• Press to select the next higher or lower preset  
station in TUNER and TV/Satellite Radio  
mode.  
14  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Functions of Remote Control Unit Buttons  
[SEARCH MODE] button  
[RDM] button  
• Press to display the Key Pad operation screen.  
• Keep pressing more than 1 second to switch  
the search mode.  
• Press to play tracks at random in CD and MP3/  
WMA modes.  
• Keep pressing more than 1 second to play  
folders at random in MP3/WMA mode.  
[RTN] button  
[PBC] button  
• Press to turn on and off the PBC function in the  
Video CD mode.  
• Press to switch to the menu screen while a  
Video CD is being played back. Press to switch  
to the previous screen display while the Menu  
screen is being displayed. However, it may  
occur that this button operation dose not work  
on some discs.  
[AUDIO] button  
• Press to switch the AUDIO function in the DVD  
video/Video CD modes.  
[MENU] button  
• Press to display menu stored on video disc.  
[SUB TITLE] button  
• Press to display subtitles in the DVD video  
mode.  
[SET UP] button  
• Press to show the DVD SETUP menu screen  
during DVD video playback.  
[ANGLE] button  
• Press to switch the ANGLE function in the DVD  
video mode when the Angle mark is displayed.  
(This button is available only on multiple angles  
DVDs and when the ANGLE function in the  
SET UP menu is set to ON.)  
[TOP MENU] button  
• Press to display the Top Menu screen stored  
on DVD video disc. Some discs do not display  
the top menu screen.  
[E], [e], [T], [t] buttons  
• Press to select button items on the menu  
screen of a DVD video.  
[SLOW] button  
• Press to perform slow playback in the DVD  
video/Video CD modes.  
• Press [E], [e] to scroll the Track/Folder List  
screen in the CD and MP3/WMA modes.  
iPod mode  
[ENT] button  
[BAND] button  
• Press to fix the entered data in the Key Pad  
• Press to return to the first track in the current  
play list.  
screen.  
• Press to fix the selected item in the menu  
screens.  
• Keep pressing more than 1 second to change  
to the All play mode. All tracks in the Song list  
will be played back.  
[r], [f] buttons  
• Press to select the next higher or lower chapter  
number in DVD video mode.  
• Press to select the next higher or lower track in  
CD, Video CD and MP3/WMA modes.  
• Keep pressing to perform fast-forward and fast-  
backward.  
• Keep pressing to perform slow playback while  
pausing a DVD video/Video CD play.  
[6] button  
• Press to play or pause the selected media.  
[E], [e] buttons  
• Press to scroll the list screens.  
[r], [f] buttons  
• Press to select the next higher or lower track  
numbers.  
• Keep pressing to perform fast-forward or fast-  
backward.  
[SCN] button  
• Press to perform chapter scans in the DVD  
video mode, and track scans in CD and MP3/  
WMA modes.  
CD changer mode  
• Keep pressing more than 1 second to perform  
folder scans in MP3/WMA mode.  
[BAND] button  
• Press to switch discs.  
[RPT] button  
[DISC SEL] button  
• Press to show/hide the Disc List screen.  
• Press to perform chapter repeat in the DVD  
video mode, and track repeat in CD and MP3/  
WMA modes.  
[6] button  
• Press to play and pause the selected media.  
• Keep pressing more than 1 second to perform  
folder repeat in MP3/WMA mode.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Functions of Remote Control Unit Buttons  
[0 - 9] buttons  
• Press to enter track numbers in the Key Pad  
[RPT] button  
• Press to perform track repeat.  
screen.  
• Keep pressing more than 1 second to perform  
disc repeat.  
• Other button operations in this mode are the  
same as those in DVD PLAYER mode.  
• Press to select the disc number in the Disc List  
screen.  
[E], [e] buttons  
• Press to scroll the Disc/Track List screen.  
When SUB zone is selected  
SUB zone operations are supported, but button  
functions are limited as follows:  
[r], [f] buttons  
• Press to select the next higher or lower track  
numbers.  
• Keep pressing to perform fast-forward or fast-  
backward.  
Shared modes  
[VOLUME] buttons  
[SCN] button  
• Controls sound volume for MAIN zone source.  
• Press to perform track scan.  
• Keep pressing more than 1 second to perform  
disc scan.  
[MUTE] button  
• Controls audio mute function for MAIN zone  
source.  
[RPT] button  
• Press to perform track repeat.  
• Keep pressing more than 1 second to perform  
disc repeat.  
[ISR] button  
Not supported.  
[RDM] button  
CD changer mode  
• This mode is disabled when MAIN zone is set  
to an external equipment other than the CD  
changer.  
• Press to play tracks of all discs at random.  
• Keep pressing more than 1 second to play  
folders of all discs at random.  
DVD changer mode  
DVD changer mode  
• This mode is disabled when MAIN zone is set  
to an external equipment other than the DVD  
changer.  
[BAND] button  
• Press to switch discs.  
[P.TIME] button  
• Keep pressing more than 1 second to switch  
between the time progress and remaining time  
to be displayed.  
[DISC SEL] button  
• Press to show/hide the Disc List screen.  
[0 - 9] buttons  
• Press to enter track numbers in the Key Pad  
screen.  
• Press to select the disc number in the Disc List  
screen.  
[E], [e], [T], [t] buttons  
• Press to scroll the Disc/Track List screen.  
[SCN] button  
• Press to perform track scan.  
• Keep pressing more than 1 second to perform  
disc scan.  
16  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
7. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (Detachable Control Panel) case to  
prevent scratches.  
Attaching the DCP  
1. Hook the right side of the DCP to the right side  
of the main unit.  
2. Settle the left side of the DCP to the main unit.  
We recommend taking the DCP with you when  
leaving the car.  
Removing the DCP  
1. Keep pressing the [SRC] button more than 1  
second to turn off the power.  
Magnet  
CAUTION  
CAUTION  
This unit uses a magnet to fix the DCP. For  
the items that can be affected by  
[
]
SRC button  
magnetism, such as magnetic cards, be  
sure to keep them away from this unit.  
The DCP can easily be damaged by impact.  
After removing it be careful not to drop it  
nor subject it to strong impact.  
2. Pull the left side of the DCP toward you, and  
remove it.  
Remote control unit cannot be used when  
the DCP is removed.  
Note:  
If the DCP is dirty, wipe it off by using a soft dry  
cloth.  
CAUTION  
CAUTION  
When the Auto Panel function (see page 28) is  
set to “OFF”, be sure to close the liquid  
crystal panel for safe before removing the  
DCP.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
8. CAUTIONS ON HANDLING  
Liquid crystal panel/Generalities  
For a longer service life, be sure to read the following cautions.  
• Be sure to house the liquid crystal panel inside  
the main unit when parking the car outdoors for  
long period of time. The liquid crystal panel will  
operate properly in a temperature range of 0 to  
60°C.  
• Do not allow any liquids on the set from drinks,  
umbrellas etc. Doing so may damage the  
internal circuitry.  
• Do not disassemble or modify the set in any  
way. Doing so may result in damage.  
• Do not draw the liquid crystal panel out and use  
it as a tray. Also, subjecting the liquid crystal  
panel to shocks may result in breakage,  
deformation or other damage.  
• Do not let cigarettes burn the display. Doing so  
may damage or deform the cabinet.  
• If a problem should occur, have the set  
inspected at your store of purchase.  
• Do not insert objects or poke in the space  
between the liquid crystal panel and the main  
unit when the panel is tilted.  
• Do not place anything on the display when the  
panel is tilted.  
• The remote controller may not work if the  
remote control sensor is exposed to direct  
sunlight.  
• In extremely cold weather, the display  
movement may slow down and the display may  
darken, but this is not a malfunction. The  
display will work normally when the  
temperature increases.  
• Small black and shiny spots inside the liquid  
crystal panel are normal for LCD products.  
• The liquid crystal panel may stop temporarily  
when it opens or closes, when the engine stops  
or when it is cold.  
• The touchkeys on the display operate when  
slightly touched. Do not press the touchkey  
screen with much force.  
• Do not push the case surrounding the touchkey  
panel with much force. This may cause  
malfunctioning of the touchkeys.  
Cleaning  
Cleaning the cabinet  
Use a soft, dry cloth and gently wipe off the dirt.  
For tough dirt, apply some neutral detergent  
diluted in water to a soft cloth, wipe off the dirt  
gently, then wipe again with a dry cloth.  
Do not use benzene, thinner, car cleaner, etc.,  
as these substances may damage the cabinet  
or cause the paint to peel. Also, leaving rubber  
or plastic products in contact with the cabinet  
for long periods of time may cause stains.  
Cleaning the liquid crystal panel  
The liquid crystal panel tends to collect dust, so  
wipe it off occasionally with a soft cloth. The  
surface is easily scratched, so do not rub it with  
hard objects.  
18  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Handling Discs  
Handling  
Storage  
• New discs may have some roughness around  
the edges. If such discs are used, the player  
may not work or the sound may skip. Use a  
ball-point pen or the like to remove any  
roughness from the edge of the disc.  
• Do not expose discs to direct sunlight or any  
heat source.  
• Do not expose discs to excess humidity or  
dust.  
• Do not expose discs to direct heat from  
heaters.  
Ball-point pen  
Cleaning  
Roughness  
• To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the center  
of the disc to the circumference.  
• Do not use any solvents, such as commercially  
available cleaners, anti-static spray, or thinner  
to clean discs.  
• After using special disc cleaner, let the disc dry  
off well before playing it.  
• Never stick labels on the surface of the disc or  
mark the surface with a pencil or pen.  
• Never play a disc with any cellophane tape or  
other glue on it or with peeling off marks. If you  
try to play such a disc, you may not be able to  
get it back out of the DVD player or it may  
damage the DVD player.  
• Do not use discs that have large scratches, are  
misshapen, cracked, etc. Use of such discs  
may cause misoperation or damage.  
• To remove a disc from its storage case, press  
down on the center of the case and lift the disc  
out, holding it carefully by the edges.  
• Do not use commercially available disc  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the disc or  
cause breakdown of the internal mechanism.  
On Discs  
• Exercise a good precaution when loading a  
disc with the panel open.  
• Never turn off the power and remove the unit  
from the car with a disc loaded.  
CAUTION  
CAUTION  
With the screen open, a driver may not be  
able to see the disc insertion slot. For your  
safety, insert a disc with the screen closed.  
Even when the screen is closed, however, the  
recessed disc slot may be difficult for a driver  
to see, care is needed whenever inserting  
discs.  
No/Non  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
9. DVD VIDEO SYSTEM  
DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc  
contains either one film or four hours of music.  
DVD Video Features  
This unit provides the following functions in  
addition to the high image quality and sound  
quality of DVD video.  
Note:  
The functions described in the section, “Features”,  
for example, the recorded language, subtitles,  
angles, etc. differ with the DVD video disc. Refer to  
the instructions provided with the DVD video.  
Some disc functions may operate differently from  
described in this manual.  
Multi-story function  
When a DVD video contains more than one story  
for a film, you can select the story you wish to  
enjoy. The operation procedures vary with the  
disc; observe the instructions for selecting a story  
provided during playback.  
Dolby digital  
Dolby digital enables up to 5.1 independent multi-  
channel audio reproduction, the same type of  
surround system that is used in movie theaters.  
Multi-sound function  
DVD video can store up to 8 languages for one  
film; select the language of your preference.  
• The languages stored on the disc are indicated  
by the icon shown below.  
DTS  
DTS (Digital Theater System) is a digital sound  
compression technique developed by Digital  
Theater Systems, Inc.  
This low sound compression format delivers a  
large amount of data and makes it possible to  
reproduce a high quality sound.  
Menu screens  
Menus can be called up during DVD video  
playback to perform menu setting.  
Multi-angle function  
A DVD video that is filmed from multiple angles  
allows you to select the angle of choice.  
• The number of recorded angles are indicated  
by the icon shown below.  
• Example showing menu display  
Subpicture (subtitles) function  
A DVD video can record subtitles for up to 32  
languages and you can select the language of  
the subtitles you wish to see.  
• The number of recorded subtitle languages are  
indicated by the icon shown below.  
20  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Discs  
Playable discs  
This DVD video player can play the following  
discs.  
Discs that cannot be played back  
This DVD video player cannot play back DVD-  
Audio, DVD-RAM, Photo CDs, etc.  
Note:  
It may also not be possible to play back CDs  
recorded on a CD-R unit and CD-RW unit. (Cause:  
disc characteristics, cracks, dust/dirt, dust/dirt on  
player’s lens, etc.)  
If a CD-R or CD-RW disc that has not been  
finalized is played, it will take a long time to start  
playing. Also, it may not be possible to play  
depending on its recording conditions.  
You cannot play Super Audio CDs. Playback of the  
CD player is not supported even if it is a hybrid  
disc.  
Playable discs  
DVD video discs  
video CDs  
CD TEXT  
WMA  
Audio CDs  
MP3 ID3 TAG  
About CD Extra discs  
About MP3/WMA playback  
This unit can play back CD-R/CD-RW, DVD-R/  
RW and DVD+R/RW discs on which MP3/WMA  
music data have been recorded.  
For a detailed information, see the section  
entitled “Listening to an MP3/WMA” (page 43).  
A CD Extra disc is a disc in which a total of two  
sessions have been recorded. The first session is  
Audio session and the second session is Data  
session.  
Your personally-created CDs with more than  
second data sessions recorded cannot be played  
on this DVD video player.  
Note:  
Note on region numbers  
When you play a CD Extra disc, only the first  
session will be recognized.  
The DVD video system assigns a region number  
to DVD video players and DVD discs by sales  
area. DVD video players sold in the United States  
can play back DVD discs with the region number  
ALL”, “1” or any combination of numbers that  
also incorporate a “1”.  
About playing a CD-R/CD-RW disc  
(MP3, WMA)  
This player can play CD-R/CD-RW discs  
previously recorded in music CD format (MP3,  
WMA) or video CD format.  
The DVD video region number is marked on the  
disc jacket as shown below.  
About playing a DVD-R/RW or  
DVD+R/RW disc  
This player cannot play DVD-R/RW and DVD+R/  
RW discs previously recorded in video CD  
format.  
1
4
ALL  
1
6
However, MP3/WMA files recorded on DVD-R/  
RW and DVD+R/RW discs can be played.  
About the registered marks etc.  
• This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Macrovision, and is intended for  
home and other limited viewing uses only  
unless otherwise authorized by Macrovision.  
Reverse engineering or disassembly is  
prohibited.  
• Manufactured under license from Dolby  
Laboratories.  
Dolby”, and the double-D symbol are  
trademarks of Dolby Laboratories.  
• “DTS” and “DTS Digital Out” are trademarks of  
Digital Theater Systems, Inc.  
• “iPod” is for legal or rightholder-authorized  
copying only. Do not steal music.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
10.OPERATIONS  
Basic Operations  
Note:  
Selecting a mode  
Be sure to read this chapter referring to the chapter  
3. CONTROLS” on page 5.  
When the liquid crystal panel is  
open  
CAUTION  
CAUTION  
1. Press the [SRC] button to display the Source  
When the unit is turned on, starting and  
stopping the engine with its volume raised to  
the maximum level may harm your hearings.  
Be careful about adjusting the volume.  
menu.  
* External equipment not connected to this unit  
is not displayed.  
2. Touch the desired mode key.  
Turning on and off the power  
Note:  
When the liquid crystal panel is  
closed  
Start the engine before using this unit.  
Be careful about using this unit for a long time  
without running the engine. If you drain the car’s  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
1. Press the [SRC] button to change the  
operation mode.  
Each time you press the [SRC] button, the  
operation mode changes in the following  
order:  
TUNER mode (Satellite Radio mode) ➜  
DVD PLAYER mode (CD CHANGER  
mode) (DVD CHANGER mode) (TV/  
VTR mode) VISUAL mode (iPod mode)  
TUNER mode...  
1. Start the engine. The illuminations on this unit  
light up.  
Engine ON  
position  
* External equipment not connected to this unit  
will not be selected.  
* When 2-ZONE function is ON, the [SRC]  
button operates only for the MAIN zone. To  
switch to a SUB zone source, specify from the  
Source menu screen, or use the optional  
remote control unit.  
2. Press the [SRC] button. When the liquid  
crystal panel is not open, press the [P]  
(OPEN) button to turn on the power. The unit  
automatically memorizes its last operation  
mode and will automatically switch to display  
that mode.  
Adjusting the volume  
1. Press the [E]/[e] buttons to adjust the  
volume.  
3. To turn off the power, press and hold the  
[SRC] button for more than 1 second.  
[E]: Increases the volume.  
[e]: Decreases the volume.  
* The volume level indicated in the display is in a  
range from 0 (min.) to 33 (max.).  
CAUTION  
CAUTION  
While driving, keep the volume level at which  
external sounds can be heard.  
22  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Mute  
1. When in the TUNER, Satellite Radio, VISUAL  
or TV mode, press the [p] button to turn  
the mute on and off.  
70˚  
When in the DVD PLAYER, iPod or changer  
mode, keep pressing the [p] button more  
than 1 second to turn the mute on and off.  
* When the mute is turned on, “MUTE” appears  
at the bottom left of the screen.  
Opening and turning the liquid  
crystal panel  
Panel calibration function  
The liquid crystal panel’s maximum angle of  
inclination can be adjusted to match the  
installation configuration within the automobile.  
• Perform this with the panel in its closed  
position.  
WARNING  
To prevent the battery from going dead,  
operate this unit with the engine running  
if possible.  
1. Keep pressing the [P] (OPEN) button more  
than 5 seconds.  
When the liquid crystal panel is  
operating, be careful not to get your hand  
or finger caught between the panel and  
main unit or the instrument panel of the  
car.  
The electronic beep will be heard.  
After the beep sounds twice, the panel will  
come out and stand up to the maximum angle.  
After completion of the calibration, the panel  
will be housed into the unit automatically.  
Do not move the liquid crystal panel by  
hand.  
* If the panel does not strike the instrument  
panel or other parts of the car during  
calibration, the maximum inclination will be  
110°.  
Standing up the liquid crystal panel  
1. Press the [P] (OPEN) button.  
The liquid crystal panel comes out and stands  
up automatically.  
* If the panel strikes a car part during calibration  
within a range of 70° inclination, the maximum  
downward inclination will be 70°.  
The power of this unit will be turned on.  
Note:  
If the liquid crystal panel stops in the middle of its  
operation, press the [P] (OPEN) button to house  
the panel and press the button again to raise it.  
The unit will enter the same display mode as the  
display was in when last turned off.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Basic Operations  
Adjusting the angle of the liquid  
crystal panel  
The angle of the liquid crystal panel can be  
adjusted depending on the mounting angle of the  
unit or light coming into the car.  
1. Turn the power on. When the liquid crystal  
panel is closed, press the [P] (OPEN)  
button.  
2. Press the [ADJ] button, touch the [MONITOR]  
key, and then touch [C] key to display the  
following screen:  
Turning the liquid crystal panel  
horizontal (Airconditioneroperation  
mode)  
When the way the liquid crystal panel is mounted  
hinders the operation of the air conditioner, the  
position of the panel can be turned horizontal  
temporarily.  
1. Keep pressing the [P] (OPEN) button more  
than 2 seconds when the liquid crystal panel  
is open.  
A beep sounds and the liquid crystal panel  
turns horizontal.  
* Press the [P] (OPEN) button again for the  
panel to return to the original position.  
* The unit can be set so that the panel returns to  
the original position after a set time in the  
horizontal position (See page 28).  
Adjusting the AUDIO  
3. Repeat touching the [0] key to adjust the  
angle of the liquid crystal panel. Every  
touching the [0] key tilts the liquid crystal  
panel forward or backward.  
Note:  
When the optional 5.1 ch Surround Decoder  
(DVH940) is used, the following tone adjustments  
cannot be made. To adjust the tone, refer to the  
section “5.1 ch Surround Decoder Operations”.  
The adjusted angle is stored in memory.  
* Adjustment is possible within the range 70° to  
110°.  
1. Press the [ADJ] button, then touch the  
[AUDIO] key.  
* There are 5 adjustable angle available.  
MAX 110˚  
70˚  
2. Touch the item key to adjust.  
3. Perform the adjustment.  
See the following sections for detail.  
4. Touch the [Back] key to return to the previous  
screen.  
Housing the liquid crystal panel  
1. Press the [P] (OPEN) button.  
The liquid crystal panel is housed  
automatically.  
* In the following sections, only the details  
regarding adjustments are described,  
procedures to select items are skipped.  
Note:  
When leaving this unit unused for a long period of  
time or leaving your car, be sure to house the liquid  
crystal panel.  
24  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Adjusting the balance/fader  
Adjusting the MID  
The MID gain, MID frequency (center frequency)  
and MID Q can be adjusted as follows.  
2-1. Touch the []] key of the BAL/FAD item.  
3-1. Touch the [{] or [}] key to adjust to the  
2-1. Touch the []] key of the MID item.  
fader level.  
3-1. When the AUDIO MID screen is displayed,  
touch the [[] or []] key for the desirable type  
to adjust to a desirable level.  
* The factory default setting is “0”. (Adjustment  
range: front 12 to rear 12)  
[{] :  
GAIN :  
Emphasized the sound from the front  
speakers.  
–6 to 6 (The factory default setting is “0”.)  
FREQ. :  
[}] :  
700Hz, 1kHz, 2kHz (The factory default  
setting is “1kHz”.)  
Emphasized the sound from the rear  
speakers.  
Q :  
3-2. Touch the [[] or []] key to adjust to the  
1.5, 2 (The factory default setting is “2”.)  
balance level.  
* The factory default setting is “0”. (Adjustment  
range: left 13 to right 13)  
Adjusting the TREBLE  
The treble gain and treble frequency (center  
frequency) can be adjusted as follows.  
[[] :  
Emphasized the sound from the left  
speakers.  
2-1. Touch the []] key of the TREBLE item.  
[]] :  
3-1. When the AUDIO TREBLE screen is  
displayed, touch the [[] or []] key for the  
desirable type to adjust to a desirable level.  
Emphasized the sound from the right  
speakers.  
GAIN :  
Adjusting the BASS  
The bass gain, bass frequency (center  
frequency) and bass Q can be adjusted as  
follows.  
–6 to 6 (The factory default setting is “0”.)  
FREQ. :  
8kHz, 12kHz (The factory default setting is  
12kHz”.)  
2-1. Touch the []] key of the BASS item.  
3-1. When the AUDIO BASS screen is  
displayed, touch the [[] or []] key for the  
desirable type to adjust to a desirable level.  
Adjusting the non fader output  
volume  
You can adjust the volume output from the unit’s  
non fader output terminal.  
GAIN :  
–6 to 8 (The factory default setting is “0”.)  
2-1/ Touch the [[] or []] key of the NON FADER  
3-1. VOL item to adjust to desirable level.  
FREQ. :  
50Hz, 80Hz, 120Hz (The factory default  
setting is “50Hz”.)  
Setting range :  
–6 to 6 (The factory default setting is “0”.)  
Q :  
1, 1.25, 1.5, 2 (The factory default setting is  
1”.)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Basic Operations  
Turning on/off the MAGNA BASS  
EXTEND  
The Magna Bass Extend does not adjust the low  
sound area like the normal sound adjustment  
function, but emphasizes the deep bass sound  
area to provide you with a dynamic sound.  
Adjusting the brightness, color, hue  
and dimmer level  
Note:  
This function is not available when the liquid crystal  
panel is closed.  
The Color and Hue settings can be adjusted only  
in the DVD video, Video CD, TV/VTR, VISUAL and  
DVD changer modes, and only when the car is  
stopped and the parking brake is applied.  
The Hue setting can be adjusted only when the  
NTSC mode is selected.  
2-1. Touch the [C] key to display the next menu  
screen.  
3-1. Touch [ON] or [OFF] of the [M-B EX] item to  
turn the Magna Bass Extend effect on or off  
(The factory default setting is “OFF”).  
2-1. Touch the []] key of the MONI ADJ item to  
display the MONI ADJ screen.  
* This screen can also be displayed directly by  
pressing the [MONI] button.  
Adjusting the MONITOR  
1. Press the [ADJ] button, then touch the  
[MONITOR] key.  
2-2. Touch the [Bright] key repeatedly to select  
the adjustment type. Every pressing it  
changes adjustment type as follows:  
[Bright] [Color] [Hue] [Dimmer] ➜  
[Bright] ...  
“Bright” :  
Adjusts the brightness of the display.  
“Color” :  
Adjusts the color saturation.  
“Hue” :  
2. Perform the adjustment for the desired item.  
See the following sections for detail.  
Adjusts the tone of color (red is emphasized  
or green is emphasized).  
3. Touch the [Back] key to return to the previous  
“Dimmer” :  
Adjusts the panel brightness when the car  
lights are ON/OFF.  
screen.  
* In the following sections, only the details  
regarding adjustments are described,  
procedures to select items are skipped.  
The factory default setting is :  
When the car light is off: brightest setting (58  
steps)  
When the car light is on :  
medium brightness (29 steps)  
2-3. Touch [[] or []] key to adjust a level.  
“Bright”  
[]] : Press to make image brighter.  
[[] : Press to make image dimmer.  
“Color”  
[]] : Press to increase color depth.  
[[] : Press to decrease color depth.  
“Hue”  
[]] : Press to make image brighter.  
[[] : Press to make image dimmer.  
“Dimmer”  
[]] : Press to make image brighter.  
[[] : Press to make image dimmer.  
26  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Warning display when CCD camera  
is installed  
When a TV tuner (optional) is installed together  
with optional CCD camera, the following warning  
message is displayed during use of the CCD  
camera: “Make sure of safety around your  
vehicle”.  
Front monitor lock  
When an external device is connected to the  
Visual terminal, lock the front monitor to show the  
visual input source.  
1. Keep pressing the [ADJ] button more than 1  
second to set the monitor lock.  
The front monitor screen is locked to show the  
visual input source.  
2. To cancel the monitor lock, press the [ADJ]  
button.  
2-1. Touch the [ON] or [OFF] key of the  
CAMERA WARNING item to turn this  
function on or off (The factory default setting  
is “ON”).  
The screen returns to show the image of the  
selected mode.  
Switching the VTR system between  
NTSC and PAL  
Adjusting the GENERAL  
1. Press the [ADJ] button, then touch the  
[GENERAL] key.  
Note:  
This function is enabled only when the panel is  
open.  
This setting is applied only to the VISUAL/VTR  
input mode.  
2-1. Touch the [NTSC] or [PAL] key of the  
NTSC/PAL item to set the VTR system (The  
factory default setting is “NTSC”).  
Changing the color of the title and  
command bars in the screen  
2. Perform the adjustment for the desired item.  
See the following sections for detail.  
2-1. Touch the [AUTO], [DAY] or [NIGHT] key of  
the COLOR item to set the color mode (The  
factory default setting is “AUTO”).  
3. Touch the [Back] key to return to the previous  
screen.  
* In the following sections, only the details  
regarding adjustments are described,  
procedures to select items are skipped.  
AUTO” :  
The color is changed according to the status  
of the car light:  
When the car light is off: light gray color  
When the car light is on: dark gray color  
Clock Adjustment  
DAY” :  
2-1. Touch the []] key of the CLOCK item.  
Set to the light gray color.  
2-2. Touch the [{] and [}] keys under the Hour,  
Minute and a.m./p.m. box to adjust the time,  
then touch the [SET] key (The factory  
default setting is “1:00 a.m.”).  
NIGHT” :  
Set to the dark gray color.  
Turning on/off the motion of the  
background picture  
2-1. Touch the [ON] or [OFF] key of the MOTION  
item to set the function (The factory default  
setting is “ON”).  
* The time is displayed in 12-hour format.  
Setting the BEEP  
The sound heard when you make operations is  
called “beep”. The unit can be set up so that it  
does not produce this beep sound.  
* The factory default setting is “BEEP ON”.  
2-1. Touch the [ON] or [OFF] key of the BEEP  
item to turn the function on or off.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Basic Operations  
Switching CONNECT (connect)  
Make the following settings when an external  
device is connected to the Visual terminal.  
Setting the Auto Panel  
When you remove or attach the DCP  
(Detachable Control Panel), you can set the  
liquid crystal panel automatically housing or  
opening.  
NAVI :  
when a navigation system is connected.  
* The factory default setting is “ON”.  
* When the navigation system is connected, use the  
monitor lock function. Locking the monitor locks  
the screen size in F.WIDE mode (full wide) and the  
VTR system to NTSC.  
2-1. Touch the [C] key to display the next menu  
screen.  
2-2. Touch the [ON], [OFF] or [CLOSE] key of  
the AUTO PANEL item to set to “ON”, “OFF”  
or “CLOSE”.  
OTHER :  
for external devices other than a navigation  
system.  
ON :  
NONE :  
The liquid crystal panel houses  
automatically after removing the DCP.  
And the liquid crystal panel opens  
automatically after attaching the DCP.  
when no external device is connected.  
* The factory default setting is “NONE”.  
2-1. Touch the [NAVI], [OTHER] or [NONE] key  
of the CONNECT item to set the function to  
NAVI”, “OTHER” or “NONE”.  
OFF :  
Normal operation.  
CLOSE :  
Setting the Blink LED  
You can set the unit to blink the LED indication  
when the DCP (Detachable Control Panel) is  
removed.  
The liquid crystal panel houses  
automatically after removing the DCP.  
Setting the time of air conditioner  
operation mode  
This setting can be used to adjust the time the  
panel stays in the horizontal position when in the  
air conditioner operation mode.  
2-1. Touch the [ON] or [OFF] key of the BLINK  
LED item to turn the function on or off (The  
factory default setting is “OFF”).  
* The factory default setting is 10 seconds.  
Performing the system check  
2-1. Touch the [C] key to display the next menu  
2-1. Touch the []] key of the SYSTEM CHECK  
screen.  
item.  
The available operation mode is listed in  
white letters.  
2-2. Touch the [5s], [10s] or [30s] key of the  
HVAC MODE item to set the time to “5  
seconds”, “10 seconds” or “30 seconds”.  
2-2. Touch [Check] key at the top right of the  
screen to perform the system check  
manually.  
The system will be restarted after  
performing the system check.  
28  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Setting the 2-ZONE function  
2-ZONE Function  
About the 2-ZONE function  
* The factory default setting is “OFF”.  
1. Press the [SRC] button to display the Source  
menu.  
The 2-ZONE function is a function that outputs  
separate sounds/images from the MAIN zone  
and SUB zone (such as the optional rear monitor)  
by simultaneously operating two sources in the  
one center unit. Thereby, plural listeners are  
allowed to enjoy separate audio/visual sources.  
The 2-ZONE function allows internal sources  
(TUNER, DVD, VISUAL, iPod) and external  
sources via CeNET connection (CD changer, TV,  
Satellite Radio, etc.) to be played on MAIN zone  
and SUB zone.  
2. Touch and hold the [2 ZONE] key more than  
1 second to turn the 2-ZONE function on.  
The 2-ZONE indication is displayed at the top  
left of the screen.  
* The function can also be switched by using the  
optional remote control unit. See the chapter “6.  
REMOTE CONTROL” for details.  
Controlling sources of MAIN zone and SUB zone  
can be made from the main unit and from the  
remote control unit.  
The source sounds of the MAIN zone are played  
back from the speakers of the vehicle side, and  
those of the SUB zone are from the headphone  
systems (WH104).  
Sound volume control on the SUB zone is  
performed by the headphone system (WH104).  
2-ZONE indication  
Displayed when 2-ZONE function is  
turned on.  
Note:  
[MAIN]:MAIN zone is selected.  
[SUB]:SUB zone is selected.  
Radio stations cannot be selected when the SUB  
zone is selected.  
The external different equipments connected via  
CeNET cannot simultaneously be used in the  
MAIN and SUB zones. Though the same  
equipment can be specified simultaneously.  
If the 5.1 channel surround decoder (DVC940) is  
connected, this function is disabled.  
When an external equipment is specified for the  
SUB zone, the 2-ZONE function is turned off if the  
function of audio mute for cellular phone is turned  
on or off.  
3. Touch the [SUB] key on the Source menu to  
switch to the SUB zone.  
You can control the operation modes for the  
SUB zone.  
4. Press the [SRC] button, and touch the [MAIN]  
key to return to the MAIN zone.  
5. To turn the 2-ZONE function off, touch the [2  
ZONE] key on the Source menu.  
The SUB zone cannot be controlled when the  
function of audio mute for cellular phone is turned  
on.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Basic Operations  
Monitor image and sound with 2-ZONE ON/OFF  
With 2-ZONE function OFF  
Front monitor lock ON  
Front monitor lock OFF  
Visual Visual  
Visual  
Visual  
connection  
[OTHER] (*1)  
connection  
[NAVI] (*1)  
connection  
connection  
[OTHER] (*1)  
[NAVI] (*1)  
Front monitor  
(liquid crystal  
panel)  
Displays image of Displays image of Displays image of mode selected from  
device connected device connected the Source menu.  
to the Visual  
to the Visual  
terminal.  
terminal. (*3)  
Rear monitor  
(optional)  
Displays image of mode selected from the Source menu. (*2)  
Audio output  
Sound from mode selected from the Source menu is output from 4ch speaker,  
NON-FADER, and AUDIO-OUT.  
With 2-ZONE function ON  
Front monitor lock ON  
Visual  
Front monitor lock OFF  
Visual Visual  
Visual  
connection  
connection  
connection  
connection  
[OTHER] (*1)  
[NAVI] (*1)  
[OTHER] (*1)  
[NAVI] (*1)  
Front monitor  
(liquid crystal  
panel)  
Displays image of Displays image of Displays image of mode selected from  
device connected device connected the Source menu in the MAIN zone  
to the Visual  
to the Visual  
terminal.  
mode.  
terminal. (*3)  
Rear monitor  
(optional)  
Displays image of mode selected from the Source menu in the SUB zone mode.  
(*2)  
Audio output  
• Sound from mode selected in the MAIN zone mode is output from 4ch speaker,  
NON-FADER and AUDIO-OUT.  
• Sound from mode selected in the SUB zone mode is output from SUB-OUT.  
*1:A device connected to the Visual terminal should be set up as described in the section “Switching  
CONNECT (connect)”.  
*2:No image is displayed on the rear monitor when a non-image mode such as CD changer mode, etc.  
is selected.  
*3:For safety reasons, this image is not displayed when the vehicle is moving. The picture can be  
watched only when the vehicle is stopped and the parking brake is applied.  
30  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Radio Operations  
Listening to the radio  
Selecting stations by entering  
frequency  
This function displays the Key Pad on the screen  
allowing you to tune by entering a frequency.  
1. Press the [SRC] button, and touch the  
[TUNER] key.  
The TUNER mode screen is displayed.  
1. Press the [BAND] button or touch the [Band]  
key to select the desired band (FM or AM).  
2. Touch the [Search] key to display the Key  
Pad screen.  
2. Press the [BAND] button or touch the [Band]  
key to select the radio band. Each time the  
button is pressed, the radio reception band  
changes in the following order:  
FM1 FM2 FM3 AM FM1...  
3. Press the [R] or [F] button to tune in the  
3. Touch the [0]~[9] key corresponding with the  
frequency you desired. When you input the  
wrong number, touch the [CLR] key to delete  
the last input number.  
4. Touch the [ENT] key to tune in to the entered  
frequency.  
5. Touch the [Back] key.  
previous or next preset station.  
Seek tuning  
1. Press the [BAND] button or touch the [Band]  
key to select the desired band (FM or AM).  
2. If MANU” is displayed at the bottom of the  
display, keep pressing the [BAND] button  
more than 1 second.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In quick  
tuning mode, you can quickly tune the desired  
frequency.  
MANU” in the display goes off, and seek  
tuning is now available.  
* The same operation is available by using the  
[Band] key.  
3. Touch the [X] or [x] key to automatically  
seek a station.  
1. Press the [BAND] button or touch the [Band]  
• When touching the [x] key, the station is  
sought in the direction of higher  
frequencies.  
• When touching the [X] key, the station is  
sought in the direction of lower frequencies.  
key to select the desired band (FM or AM).  
2. If MANU” is not displayed at the bottom of the  
display, keep pressing the [BAND] button  
more than 1 second.  
MANU” appears in the display, and manual  
tuning is now available.  
* The same operation is available by using the  
[Band] key.  
3. Tune into a station.  
Quick tuning :  
Touch and hold the [X] or [x] key for more  
than 1 second to tune in a station.  
Step tuning:  
Touch the [X] or [x] key to manually tune in  
a station.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Radio Operations  
Recalling a preset station  
There are total of 24 preset positions (6-FM1, 6-  
FM2, 6-FM3, 6-AM) to store individual radio  
stations in memory.  
There are 2 ways available to recall the preset  
station.  
Auto store  
Auto store is a function for storing up to 6 stations  
that are automatically tuned in sequentially. If 6  
receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
1. Touch the [Band] key to select the desired  
Using the [R] or [F] button  
band. (FM or AM)  
1. Press the [BAND] button to select the desired  
2. Touch the [List] key.  
band (FM or AM).  
3. Touch and hold the [AS] key for more than 2  
seconds.  
2. Press the [R] or [F] button to recall the  
previous or next stored station.  
A beep sounds and the stations with good  
reception are stored automatically to the  
preset channels.  
Using the Preset List screen  
1. Touch the [List] key.  
Preset scan  
Preset scan receives the stations stored in preset  
memory in order. This function is useful when  
searching for desired station in memory.  
1. Touch the [List] key.  
2. Touch the [PS] key to start preset scan. The  
unit starts scanning each station for 7  
seconds sequentially.  
3. When the desired station is tuned in, touch the  
[PS] key again to continue receiving that  
station.  
2. Touch the corresponding Preset key to recall  
the stored station.  
* You can select the desired band by touching  
the [Band] key.  
* Touching and holding the desired Preset key  
for more than 2 seconds will store the current  
station to the preset memory.  
Instant station recall (ISR)  
Instant station recall is a special radio preset that  
instantly accesses a favorite radio station at a  
touch of a button. The ISR function even  
operates with the unit in other modes.  
3. Touch the [List] key to return to the previous  
screen.  
ISR memory  
1. Select the station that you wish to store in ISR  
memory.  
2. Keep pressing the [ISR] button more than 2  
seconds to store the current station into the  
ISR memory.  
Manual memory  
1. Touch the [Band] key to select the desired  
band. (FM or AM)  
2. Select the desired station with seek tuning,  
manual tuning, or preset tuning.  
3. Touch the [List] key.  
Recalling a station with ISR  
4. Touch and hold one of the Preset key for more  
than 2 seconds to store the current station into  
the preset memory.  
1. In any mode, press the [ISR] button to switch  
to the TUNER mode and tune the selected  
radio station. “ISR” appears in the display.  
Press the [ISR] button again to return to the  
previous mode.  
* The [ISR] button is disabled when SUB zone is  
selected in the 2-ZONE mode.  
32  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
Setting up the screen size  
Set up the screen size according to the rear view  
monitor which is connected to this unit.  
Changing DVD System  
Settings  
Note:  
4-1. Touch the [WIDE], [N PS] or [N LB] key of  
the TV DISPLAY item to change the screen  
size to “WIDE”, “N PS” or “N LB”.  
If the Setup operation is performed in the middle of  
DVD video play, the disc will restart from  
beginning.  
The settings on the DVD SETUP menu cannot be  
set with the remote control unit.  
* The factory default setting is “WIDE”.  
When watching through a conventional  
type of the rear view monitor (4:3)  
N PS :  
Selecting the DVD SETUP menu  
1. Press the [SRC] button, and touch the [DVD  
PLAYER] key.  
The leftmost and rightmost areas of the screen  
are cut off.  
The DVD PLAYER mode screen is displayed.  
2. Touch the [Option] key to display the Option  
menu.  
3. Touch the [Setup] key to display the DVD  
SETUP menu.  
This function allows displaying the important  
part of image fully on the screen. In some  
cases, image is displayed while being panned  
(scrolled).  
N LB :  
A black zone is created in the top and bottom  
areas of the screen.  
Touch the [C] key to display the next menu.  
Touch the [c] key to return to the previous  
menu.  
This method displays Cinema Scope and Vista  
Vision images without cutting them off by  
creating a black zone on the top and bottom  
gaps.  
When watching through a wide type of the  
rear view monitor (16:9)  
4. Perform setting for the desired setting items.  
See the following sections for detail.  
5. Touch the [Back] key.  
* In the following sections, only the details  
regarding settings are described, the  
procedures to select items are skipped.  
Setting up the angle mark display  
You can set up so that the angle mark appears on  
scenes where the angles can be switched.  
4-1. Touch the [ON] or [OFF] key of the ANGLE  
item to turn the Angle function “ON” or  
“OFF”.  
* The factory default setting is “OFF”.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
DVD Video Player Operations  
Setting up the disc menu language  
Setting up the country code  
Set up the country number for setting up of the  
parental level.  
4-1. Touch the []] key of MENU LANGUAGE  
item.  
The MENU LANGUAGE menu is displayed.  
4-1. Touch the []] key of PARENTAL LOCALE  
item.  
4-2. Touch the key to select a desired language  
to set it.  
The PARENTAL LOCALE screen is  
displayed.  
* The factory default setting is “ENGLISH”.  
4-2. Touch the ten-key (0 to 9) to input a 4-digit  
country code.  
Setting up the audio language  
* The factory default setting is “8583” (U.S.A).  
4-1. Touch the []] key of AUDIO LANGUAGE  
item.  
The AUDIO LANGUAGE menu is displayed.  
4-2. Touch the key to select a desired language  
to set it.  
* The factory default setting is “ENGLISH”.  
Setting up the subtitle language  
4-1. Touch the []] key of SUBTITLE LANGUAGE  
item.  
The SUBTITLE LANGUAGE menu is  
displayed.  
4-3. Touch the [ENT] key.  
4-2. Touch the key to select a desired language  
to set it.  
Setting up the parental level  
You can change the level of parental lock (audio-  
visual restriction).  
* The factory default setting is “ENGLISH”.  
This function allows cutting scenes that are  
unfavorable for children or replacing them  
automatically with other scenes prepared in  
advance. For example, by replacing scenes of  
radical violence or portrayals of sex with safe  
scenes, you can make a trouble-free story as if it  
were so from the beginning.  
Setting up the password for setting  
up of the parental level  
4-1. Touch the []] key of PASSWORD item.  
The PASSWORD screen is displayed.  
4-2. Touch the ten-key (0 to 9) to input a 4-digit  
password.  
4-1. Touch the [[] or []] key of PARENTAL  
LEVEL item.  
• Input the old password, and touch the  
[ENT] key.  
* The factory default setting is “0000”.  
* Input “4356” to return password to “0000”.  
• Input a new password, and touch the  
[ENT] key.  
When you touch the [[] or []] key,  
PASSWORD input screen is displayed.  
4-2. Touch the ten-key (0 to 9) to input a 4-digit  
password, and touch the [ENT] key.  
* The factory default setting of the password is  
“0000”.  
Note:  
When a disc with view restrictions is inserted, you  
will be prompted to input a password. The disc will  
not be viewable until the correct password is  
entered.  
4-3. Touch the [[] or []] key to select level 1 to 8,  
or 0 (no parental).  
* The factory default setting is “8”.  
34  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
The relationship between DVD video category  
codes and parental level are shown in the table  
below. Use this table when setting the parental  
level.  
WARNING  
Some videos may be recorded at higher  
than desired volume levels. Increase the  
volume gradually from the minimal  
LEVEL7 NC-17  
(NO ONE 17 AND UNDER  
ADMITTED)  
setting after the video has started.  
For your safety, the driver should not  
watch the video or operate the controls  
while driving. Please note that watching  
and operating the video while driving are  
prohibited by law in some countries.  
LEVEL6  
R
(RESTRICTED)  
LEVEL4 PG-13  
(PARENTS STRONGLY  
CAUTIONED)  
Note:  
For your safety, the VRX765VD has a safety  
function which turns off the picture when the car is  
moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking brake is applied.  
If “AUDIO ONLY” appears on the screen just after  
turning on the ACC power of the car, release the  
parking brake while confirming safety, and then  
engage the parking brake again.  
LEVEL3 PG  
(PARENTAL GUIDANCE  
SUGGESTED)  
LEVEL1  
G
(GENERAL AUDIENCES)  
• The contents that the parental level restricts  
vary with the country code.  
Pausing play  
1. Press the [p] button or touch the [p]  
key to pause play.  
PAUSE” appears in the display.  
2. To resume disc play, press the [p] button  
Basic Operations  
Loading a disc  
1. Insert a disc into the center of the insertion  
slot with the label side facing up. The disc  
plays automatically after loading.  
again.  
Note:  
Ejecting a disc  
1. Press the [o] (EJECT) button to eject disc.  
EJECT” appears in the display. The play  
mode then switches to the TUNER mode.  
Never insert foreign objects into the disc insertion  
slot.  
If the disc is not inserted easily, there may be  
another disc in the mechanism or the unit may  
require service.  
* If a disc is left in the ejected position for 15  
seconds, the disc is automatically reloaded  
(Auto reload). In this case, however, the play  
mode will remain set to the TUNER mode.  
8 cm (single play) discs cannot be used.  
CAUTION  
CAUTION  
With the screen open, a driver may not be  
able to see the disc insertion slot. For your  
safety, insert a disc with the screen closed.  
Note:  
If you force a disc into before auto reloading, this  
can damage the disc.  
Watching/Listening to a disc already  
inserted  
1. Press the [SRC] button, and touch the [DVD  
PLAYER] key to select the DVD PLAYER  
mode.  
Play starts automatically.  
If no disc is loaded in the unit, “NO DISC”  
appears in the display.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
DVD Video Player Operations  
DVD Video Operations  
Watching a DVD-Video  
Operating the DVD menu  
You can select the button items displayed in the  
DVD menu by directly touching it.  
If the button items are hard to select correctly,  
you can also operate them by displaying Key Pad  
on the screen.  
After disc loading, the play mode is automatically  
engaged.  
• When playback is not started, press the [p]  
button or touch the [p] key.  
• Button operation may differ depending on the  
story of the disc.  
* When the Key Pad is displayed, direct operation of  
the button items is disabled.  
* Direct operation of the button items is enabled  
only when the screen size is set to “WIDE” (see  
page 33).  
After the menu screen is displayed  
1. Press the [CONT.] button.  
For normal DVD-Video discs, the DVD menu  
screen appears.  
After the DVD menu screen is displayed, select  
an item in the following operations and play it  
back.  
The “Cross-Key” ({}[ ]) is displayed.  
• Repeat pressing the [CONT.] button  
changes the mode as follows: Cross-Key  
mode Ten-Key mode Direct operation  
mode Cross-Key mode ...  
2. Select the DVD menu button items use either  
the “Cross-Key” or the “Ten-Key” according  
to the disc contents menu.  
Showing the DVD PLAYER mode  
screen  
The DVD PLAYER mode screen is used to  
control the playback mode from the screen.  
3. Touch the [ENT] key to specify the selected  
button item.  
1. Touch the screen.  
The DVD PLAYER mode screen is displayed.  
If you do not touch the screen for 7 seconds,  
the display will return to the playback screen.  
Switching Key Pad position  
When the Key Pad becomes difficult to view in  
the menu display, you can move it to the other  
side of the screen.  
Showing the DVD menu  
1. Press the [MENU] button during playback.  
Key PAD  
The DVD menu appears.  
* The displayed contents may differ depending  
on the DVD software.  
• The same operation can be performed by  
touching the [Menu] key from the DVD  
PLAYER mode screen.  
• Example showing DVD menu display  
Key PAD  
36  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
Stopping playback  
1. Showing the DVD PLAYER mode screen,  
touch and hold the [p] key for more than 1  
second during playback.  
Skipping a chapter (searching)  
About chapter  
Chapter means a small segment to divide the  
data area of the disc.  
Playback is stopped.  
1. Press the [R] or [F] button during  
playback.  
2. To resume playback, touch the [p] key.  
Playback resumes from the scene where  
playback is stopped.  
Chapters are skipped, as many as the times  
the button is pressed, and playback starts.  
Current  
location  
Pausing playback  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
Chapter  
up  
Chapter  
down  
Chapter  
again.  
Playback resumes.  
• Pressing the [F] button starts playback  
from the beginning of the next chapter.  
• Pressing the [R] button starts playback  
from the beginning of the current chapter.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous chapter.  
• The unit may return to the DVD PLAYER  
mode screen when the [F] or [R]  
button is pressed.  
Slow playback  
1. Press the [p] button or touch the [p]  
key, then press and hold the [F] button.  
While pressing the button, slow playback  
continues at the speed 1/3 times the normal  
playback.  
Releasing the button resumes to the normal  
playback.  
• Slow playback cannot be performed in the  
backward direction. In addition, audio  
cannot be reproduced during slow  
playback.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
• No audio is reproduced during fast forward  
and fast backward operation.  
• The fast forward and fast backward speed  
may differ depending on the disc.  
• The DVD PLAYER mode screen may  
appear when the [R] or [F] button is  
pressed.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
DVD Video Player Operations  
Searching with a chapter/title  
number  
You can locate the beginning of a scene using  
the chapter numbers or title numbers recorded  
on the DVD-Video disc.  
Repeat playback  
This operation plays back chapters recorded on  
the DVD-Video repeatedly.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [CHAPTER REPEAT] key, then  
touch the [Back] key.  
1. Showing the DVD PLAYER mode screen,  
touch the [Search] key.  
The message “C.RPT” will be displayed.  
The Key Pad screen appears with the chapter  
number input mode. Touching the [Title] key  
turns the Key Pad to the title number input  
mode.  
3. Perform the same operation to turn off the  
repeat playback.  
Title  
TOP function  
The TOP function resets the DVD player to the  
first chapter of the track.  
A large segment to divide the data area of  
the disc.  
Chapter  
1. Press the [BAND] button to playback the first  
A small segment to divide the data area of  
the disc.  
chapter (chapter No. 1).  
2. Input the number of the title/chapter that you  
Using the title menu  
want to play back with the [0] to [9] key.  
On DVD discs containing two or more titles, you  
can select from the title menu for playback.  
1. Showing the DVD PLAYER mode screen,  
touch the [Top Menu] key during playback.  
The title menu screen appears.  
3. Touch the [ENT] key.  
Playback starts from the scene of the input  
title number or chapter number.  
• If the input title/chapter number does not  
exist or searching with a title/chapter  
number is not allowed, the screen image will  
not change.  
• Depending on the disc, the title menu  
cannot be called.  
• The same operation can be performed by  
pressing and holding the [MENU] button for  
more than 1 second.  
4. Touch the [Back] key.  
Scan playback  
Scans and plays back all chapters recorded on  
the DVD-Video, the first 10 seconds for each.  
2. Select the button items displayed in the title  
menu screen by the same way of the DVD  
menu operation.  
1. Showing the DVD PLAYER mode screen,  
• Depending on the disc, items cannot be  
selected with the ten-key buttons.  
touch the [Option] key.  
2. Touch the [CHAPTER SCAN] key, then touch  
the [Back] key.  
The message “C.SCN” will be displayed.  
After scan playback of all chapters on the  
disc, chapter scanning through the same disc  
is performed again.  
Depending on the disc, the menu may appear  
again after scan playback of all chapters  
within the title.  
3. Press the [R] button to turn off the scan  
playback.  
38  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
Switching among languages  
On discs in which two or more audios or audio  
languages have been recorded, you can switch  
among the audio languages during playback.  
Switching angles  
On DVD discs in which video images have been  
recorded in two or more angles, you can switch  
among the angles during playback.  
This operation can be performed when the  
Setting up the angle mark display” function  
(see page 33) is set to “ON”.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [Audio] key during playback.  
• Each time you touch the key, you can switch  
among audio languages.  
1. Touch the [  
] (Angle) key during playback.  
Each time you touch the key, you can switch  
among angles.  
• Depending on the disc, up to 9 angles may  
be recorded. For details, see the mark of the  
• Depending on the disc, up to 8 audios may  
be recorded. For details, see the mark of the  
8
disc (  
: Indicates that 8 audios have  
disc (  
: Indicates multi-angle).  
been recorded).  
• Depending on the disc, angles may switch  
smoothly or switch with a momentary still  
image.  
• When the power is turned on and when the  
disc is changed to a new one, the language  
set at the time of factory shipment is  
selected. If that language has not been  
recorded, the language specified on the  
disc.  
• When the power is turned on and when the  
disc is changed to a new one, the language  
set as the factory default is selected. If that  
language has not been recorded, the  
language specified on the disc.  
• Depending on the disc, switching may be  
completely impossible or impossible on  
some scenes.  
• It may take time to switch among audios.  
• Depending on the disc, switching may be  
completely impossible or impossible on  
some scenes.  
3. Touch the [Back] key to return to the previous  
screen.  
• It may take time to switch among angles.  
• Depending on the disc, scenes recorded in  
two or more angles may be played back.  
Switching subtitles  
On DVD discs in which two or more subtitle  
languages have been recorded, you can switch  
among the subtitle languages during playback.  
Displaying the playback status  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [P.Time] key during playback.  
3. Touch the [Back] key to return to the previous  
screen.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [Sub Title] key during playback.  
Each time you touch the key, you can switch  
among subtitles.  
• Depending on the disc, up to 32 kinds of  
subtitles may be recorded. For details, see  
the mark of the disc ( : Indicates that 8  
kinds of subtitles have been recorded).  
• Depending on the disc, switching may be  
completely impossible or impossible on  
some scenes.  
Playback status is displayed on the screen.  
8
Title number  
Chapter number  
Playback time  
Title001 Chapter001 00:0019  
• It may take time to switch among subtitles.  
3. Touch the [Back] key to return to the previous  
screen.  
To turn off subtitles  
1. Repeat touching the [Sub Title] key until “Sub  
Title: OFF” is displayed on the screen.  
Subtitles are turned off.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
DVD Video Player Operations  
Slow playback  
1. Press the [p] button then press and hold  
the [F] button.  
Watching a video CD  
After disc loading, the play mode is automatically  
engaged.  
• Button operation may differ depending on the  
story of the disc.  
After the menu screen is displayed  
For Video CD discs equipped with the PBC (Play  
Back Control) function, the menu screen  
appears. After the menu screen is displayed,  
select an item in the following operations and  
play it back.  
While pressing the button, slow playback  
continues at the speed 1/3 times the normal  
playback.  
• Slow playback cannot be performed in the  
backward direction. In addition, audio  
cannot be reproduced during slow  
playback.  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
playback.  
Showing the V-CD menu (for Video  
CD discs with PBC)  
The track is skipped and playback starts.  
* This key does not function on some discs.  
Current  
location  
1. Touch the screen to display the VIDEO CD  
mode screen, then touch the [Menu] key  
during playback.  
The Video CD menu appears.  
The displayed contents may differ, depending  
on the Video CD software.  
Track  
Track  
Track  
• Example showing menu display  
Backward  
direction  
Playback  
direction  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
• In the case of some discs furnished with  
PBC function, when PBC is set to “ON”, this  
operation will cause the menu screen to be  
displayed.  
2. To operate the Video CD menu items, press  
the [CONT.] button and use either the “Cross-  
Key Pad” or the “Ten-Key Pad” according to  
the disc contents menu.  
• You can also operate the Video CD menu  
by directly touching the menu items.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
Pausing playback  
1. Press the [p] button. Playback stops.  
2. To resume playback, press the [p] button  
again.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes to the normal  
speed playback.  
• No audio is reproduced during fast forward  
and fast backward operation.  
Playback resumes from the scene where  
playback is paused.  
• The unit may return to the menu screen  
when the button is pressed.  
40  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
Searching with a track number  
This operation allows searching with the track  
numbers recorded on the video CDs.  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Touch the [Search] key.  
Playback control (PBC)  
This control signal is recorded on a Video CD for  
version 2.0 and used to control playback. Using  
pre-recorded menu screens in the Video CD with  
PBC, you can enjoy playback of software with a  
simplified dialog function or software with search  
function. You can also enjoy a still picture at high  
or standard resolution.  
3. Input the track number that you want to play  
back with [0] to [9] key.  
4. Touch the [ENT] key.  
Listening to a CD  
Playback starts from the scene of the input  
track number.  
• If the input track number does not exist or  
searching with a track number is not  
allowed, the screen image will not change.  
* If you are playing a disc with PBC and the PBC  
function is engaged, this operation may not be  
performed.  
This unit is a CD TEXT compatible model, and  
supports the display of the DISC TITLE, TRACK  
TITLE and ARTIST of the CD TEXT.  
After disc loading, the play mode is automatically  
engaged.  
• When playback is not started, press the [p]  
button or touch the [p] key.  
5. Touch the [Back] key.  
Note:  
This unit supports only CD TEXT in English. Also,  
some character data may not be reproduced  
properly on the display.  
Changing audio output  
You can change the audio output method.  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Touch the [Audio] key during playback.  
Each time you touch the key, the audio output  
method is switched as follows:  
Pausing playback  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
or touch the [p] key.  
L (Left) R (Right) STEREO  
Playback resumes.  
Displaying the playback status  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Touch the [P.Time] key during playback.  
The screen will automatically return to the  
playback screen in about 7 seconds, and the  
playback status will be displayed on the  
playback screen.  
On/Off of Playback Control  
On Video CDs equipped with Play Back Control  
function, you can turn it on/off.  
* The factory default setting is “ON”.  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Each time you touch the [PBC] key, you can  
switch between on and off.  
When the PBC is turned on or off, the disc  
plays from the beginning.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
DVD Video Player Operations  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
playback.  
Other various play functions  
1. Touch the [Option] key.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
2. Touch the touch key of the function you want  
to play.  
TOP function  
The TOP function resets the DVD player to the  
first track of the disc.  
[Track Scan] : track scan playback  
This operation scans and plays back all tracks  
recorded on the disc, the first 10 seconds for  
each.  
1. Press the [BAND] button to playback the first  
track (track No. 1).  
* T.SCN” is displayed on the screen.  
[Track Repeat] : track repeat playback  
This operation plays back tracks recorded on  
the CD repeatedly.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
* T.RPT” is displayed on the screen.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes to the normal  
speed playback.  
[Track Random] : track random playback  
This operation plays back all tracks on the  
disc in no particular order.  
* T.RDM” is displayed on the screen.  
Searching with a track number  
This operation allows searching using the track  
numbers recorded on the CDs.  
3. To cancel the play, touch the key of the  
function to cancel.  
4. Touch the [Back] key to return to the previous  
screen.  
1. Touch the [Search] key.  
2. Input the track number that you want to play  
back with [0] to [9] key.  
3. Touch the [ENT] key.  
Playback starts from the track of the input  
track number.  
• If the input track number does not exist or  
searching with a track number is not  
allowed, the screen image will not change.  
4. Touch the [Back] key.  
Selecting a track on the Track List  
screen  
This function allows you to select tracks from a  
displayed list.  
1. Touch the [List] key.  
The Track List screen is displayed.  
2. When the desired track is not displayed, touch  
the [v] or [V] key to scroll the track list.  
3. Touch the desired track title key.  
The corresponding track is started playback.  
4. Press the [Back] key to return to the previous  
screen.  
42  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
Displaying CD titles  
Precautions when creating an MP3  
disc  
This unit can display title data for CD-text CDs.  
1. Touch the [Title] key.  
File extensions  
2. Touch the [X] key of the Disc, Artist, or Track  
item to cause the respective display to scroll  
once.  
1. Always add a file extension “.MP3” or “.mp3”  
to an MP3 file, and “.WMA” or “.wma” to a  
WMA file by using single byte letters. If you  
add a file extension other than specified or  
forget to add these file extension, the file  
cannot be played. In addition, if you use upper  
case and lower case letters (capital and small  
letters) mixedly for file extensions, normal  
play may not be possible.  
Listening to an MP3/WMA  
This unit is an ID3 Tag compatible model.  
This unit supports the title, artist and album  
display of the ID3 Tag versions 1 and 1.1.  
After disc loading, the play mode is automatically  
engaged.  
2. Files other than MP3/WMA data cannot be  
played.  
Logical format (File system)  
What is MP3/WMA?  
1. When writing an MP3/WMA file on a disc,  
please select “ISO9660 level 1 or level 2  
(without including expansion format)” as  
the writing software format. Normal playback  
may not be possible if the disc is recorded on  
another format.  
2. The folder name and filename can be  
displayed as the title during MP3/WMA play  
but the title must be within 31 single byte  
alphabetical letters and numerals for the  
folder name and file name (including an  
extension). Entering more letters or numerals  
than specified may cause an incorrect  
display.  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
WMA is an audio compression method  
developed by Microsoft Corporation.  
These audio compression methods have  
penetrated into PC users and become a standard  
format.  
These features compress the original audio data  
to about 10 percent of its initial size with a high  
sound quality. This means that about 10 music  
CDs can be recorded on a CD-R disc or CD-RW  
disc to allow a long listening time without having  
to change CDs.  
Note:  
Folder structure  
Some CDs recorded on CD-R/RW mode may not  
be usable.  
1. A disc with a folder having more than 8  
hierarchical levels will conflict with the  
ISO9660 and playback will be impossible.  
Displaying MP3/WMA ID3-TAG titles  
ID3 information such as title, artist and album title  
can be displayed for an MP3/WMA file containing  
ID3 Tag information.  
Number of files or folders  
1. The maximum allowable number of folders is  
255 (including root directory); the maximum  
allowable number of files is 512 (max. 255 per  
folder). This represents the maximum number  
of tracks that can be played back.  
2. Tracks are played in the order that they were  
recorded onto a disc. (Tracks might not  
always be played in the order displayed on the  
PC.)  
• Some noise may occur depending on the  
type of encoder software used while  
recording.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
DVD Video Player Operations  
• In case of a track recorded at VBR (variable  
bit rate), the display for the play time of the  
track may be slightly different from the  
actual play time. Also, the recommended  
value of VBR ranges from 64 kbps to 320  
kbps.  
• Depending on the damage conditions of a  
file, it may occur that the file is not played  
and the next file is played instead. Also, if  
the damage is in a severe condition, play  
stops showing the “ERROR 3” display.  
• After disc selection, the play mode is  
automatically engaged.  
Pausing playback  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
or touch the [p] key again.  
Playback resumes.  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
playback.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Press the [F] button starts playback from  
the beginning of the next track.  
• Press the [R] button starts playback from  
the beginning of the current track. When this  
button is pressed again within about 2  
seconds, playback starts from the  
Note:  
If ID3 Tag information was entered with 2-byte  
characters, it may occur that the characters are not  
reproduced properly on the display.  
MP3/WMA files that the DRM (Digital Rights  
Management) function is set cannot be played.  
beginning of the previous track.  
* This operation skips the track over the folder.  
Regarding MP3/WMA folder creation  
Up to 8 folder levels (including the root directory)  
can be created for MP3/WMA files (items 1 – in  
the illustration). However, on this unit, folders  
created above the third level will be converted to  
2 levels.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes to the normal  
speed playback.  
1
2
3
1
4
2
Skipping the current folder  
1. Press the [BAND] button during playback.  
The tracks of the current folder are skipped  
and playback starts from the first track of the  
next folder.  
3
4
• Folders containing no MP3/WMA files are not  
recognized.  
• Only folders containing tracks (1 to 4 in  
illustration) are given numbers and displayed  
on the list.  
44  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Video Player Operations  
Selecting a folder/track on the LIST  
screen  
Other various play functions  
1. Touch the [Option] key.  
1. Touch the [List] key during playback.  
Folder List screen is displayed.  
2. When the desired folder is not displayed,  
touch the [v] or [V] key to scroll the list.  
3. Touch the desired folder name key.  
The Track List screen appears.  
4. Touch the [v] or [V] key to scroll the list, and  
touch the desired track name key.  
The corresponding track is started playback.  
• Touch the [X] or [x] key to display the  
Track List of the previous or next folder.  
• Touch the [Back] key to return to the Folder  
List screen.  
2. Touch the touch key of the function you want  
to play.  
[Track Scan] : track scan playback  
This operation scans and plays back all tracks  
recorded on the disc, the first 10 seconds for  
each.  
5. Touch the [Back] key.  
* T.SCN” is displayed on the screen.  
Playback by selecting a folder and  
track (Direct select mode)  
This operation allows searching using the folder  
and track numbers recorded on the MP3/WMA  
disc.  
[Folder Scan] : folder scan playback  
This operation plays back the first tracks of all  
folder on the MP3/WMA disc, the first 10  
seconds for each.  
* F.SCN” is displayed on the screen.  
1. Touch the [Search] key.  
[Track Repeat] : track repeat playback  
This operation plays back the tracks currently  
being played back repeatedly.  
The Key Pad screen appears with the track  
number input mode.  
Touching the [Folder] key turns the Key Pad  
to the folder number input mode.  
* T.RPT” is displayed on the screen.  
2. Input the number for the track or folder that  
you want to play back with [0] to [9] key.  
3. Touch the [ENT] key.  
When you select the folder number, playback  
starts from track 1 of the input folder number.  
4. Touch the [Back] key.  
[Folder Repeat] : folder repeat playback  
This operation plays back tracks in an MP3/  
WMA folder repeatedly.  
* F.RPT” is displayed on the screen.  
[Track Random] : track random playback  
This operation plays the tracks in the folder in  
a random order.  
* T.RDM” is displayed on the screen.  
[Folder Random] : folder random playback  
This operation plays back tracks recorded on  
the disc in no particular order.  
* F.RDM” is displayed on the screen.  
3. To cancel the play, touch the key of the  
function to cancel.  
4. Touch the [Back] key to return to the previous  
screen.  
Displaying CD titles  
1. Touch the [Title] key.  
2. Touch the [X] key of the Folder, Track,  
Album, Artist or Title item to cause the  
respective display to scroll once.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Other Functions  
Entering titles  
Title list play  
You can display a list of titles, then select the CD  
track, disc or broadcast station to listen to from  
that list.  
* You cannot display a title list with the unit in Seek,  
Preset Scan, Auto store (Tuner or TV) mode.  
Cancel those operation modes before displaying a  
title list.  
Titles up to 10 characters long can be stored in  
memory and displayed for Radio stations, CD,  
TV stations, and CDs in the CD changer. The  
numbers of titles that can be entered for each  
mode are as follows.  
Mode  
Number of titles  
30 titles  
TUNER mode  
CD mode  
TV mode  
1. Touch the screen (TV mode only).  
2. Touch the [List] key to display the LIST  
screen.  
50 titles  
15 titles  
The following titles can be changed in a title  
list screen.  
TUNER :  
CD changer mode  
Number of titles  
A title of a station stored for the presets 1 to 6  
or frequency is displayed.  
CD-changer :  
CDC655Tz connected 100 titles  
DCZ625 connected 100 titles  
DISC titles for discs 1 to 6 are displayed.  
When there is not any disc in the changer,  
NO DISC” is displayed.  
* You cannot enter titles with the unit in Seek,  
Preset Scan, Auto store (TUNER or TV) mode.  
Cancel each of those operations before entering  
titles.  
TV/Satellite Radio :  
A title of a channel stored for the presets 1 to  
6 or a channel number is displayed.  
3. Touch the desired title key (1 to 6) to select.  
The selected broadcast station or disc is  
played.  
1. Press the [SRC] button to select the mode you  
want to enter a title (TUNER, CD, CD changer  
or TV).  
2. Select and play a CD in the CD changer or a  
CD track or tune in to a Radio station or a TV  
station for which you want to enter the title.  
4. Touch the [Back] key to return to the previous  
screen.  
3. Touch the screen (TV mode only).  
4. Touch the [List] key to display the LIST  
screen.  
To enter a CD title, touch the [Title] key.  
5. Touch the [Edit] key.  
The title input mode display appears.  
6. Touch keys of the characters, symbols, etc.  
shown in the display to input titles.  
: Centering  
“Back Space” : Backspace  
: Space  
: Memory  
: Scroll  
“Memo”  
C”  
Note:  
Up to 10 characters can be input.  
To switch the character types, touch the scroll key  
(C) at the left of the screen.  
7. Repeat the step 6 to enter the complete title.  
8. Touch and hold the [Memo] key for more than  
2 seconds to store the title into memory. The  
display returns to the original mode screen.  
46  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Other Functions  
Changing over monitor display size  
Internal amplifier cancel function  
This function is used to disable the internal  
amplifier when an external amplifier is  
connected.  
* This function is available only when the panel is  
open.  
Note:  
This function is not available while you are driving.  
Switch to the DVD PLAYER (DVD video or video  
CD)/VISUAL/DVD changer/TV mode you see.  
1. Touch the screen to display the mode menu,  
then touch “Display size” key ([F.WIDE], etc.)  
at the top right of the screen.  
* The factory default setting is “OFF”.  
1. Press the [ADJ] button.  
2. Touch the [AUDIO EXT.] key.  
3. Touch the [ON] or [OFF] of the AMP CANCEL  
item to turn the internal amplifier on or off.  
4. Touch the [Back] key to return to the previous  
The screen changes to the SCREEN MODE  
menu.  
screen.  
2. Touch the [F.WIDE], [WIDE], [CINEMA], or  
[NORMAL] key to select the desired monitor  
display size.  
Triggered audio mute for cellular  
telephones  
This unit requires special wiring to mute the audio  
signal automatically when a cellular telephone  
rings in the car.  
This function is not compatible with all cellular  
telephones. Contact your local authorized  
Clarion dealer for information on proper  
installation and compatibility.  
F. WIDE” : (full wide mode)  
The whole image elongates horizontally.  
WIDE” : (wide mode)  
The image at right and left ends in a display  
elongates horizontally.  
CINEMA” : (cinema mode)  
The image at both top and bottom in a display  
disappears.  
NORMAL” : (normal display)  
There is a black area at both right and left  
ends of a display. In case of normal TV  
broadcasting (4:3), the image can be shown  
without being cut or deformed.  
Note:  
When a 4:3 scale image (non-wide screen image)  
is displayed, part of the image may be out of view  
or the image may be distorted when in wide mode  
or full-wide mode. Please use normal mode for  
viewing such images with the proper aspect ratio.  
During superimposed display, it becomes a full-  
wide mode.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
11.OPERATIONS OF ACCESSORIES  
iPod Operations  
This unit can be used to control a connected  
Apple iPod (third generation version 2.2 or  
Controlling the iPod  
Selecting the iPod mode  
higher, iPod Mini, fourth generation, iPod nano,  
1. Connect the iPod to the connector.  
iPod with video).  
2. Press the [iPod] button.  
Note:  
The iPod mode can also be selected by  
touching the [iPod] key on the Source menu.  
Note that iPod versions higher than those noted  
above may not be playable.  
The unit will not operate, or may operate  
improperly with unsupported versions.  
First and second generation iPod and iPod shuffle  
cannot be used.  
[MENU] key  
[Shuffle] key  
List keys  
Notes regarding use of Apple iPod  
• When using an iPod, after connecting the iPod  
to the connector, select the iPod mode by  
pressing the [iPod] button, or touching the  
[iPod] key on the Source menu.  
• After the iPod has been connected to this unit,  
the iPod’s buttons are disabled for operation.  
• When the iPod mode has been selected, a  
special iPod control screen is displayed  
different from the main screens for other  
modes.  
Operation display  
• When the iPod mode has been selected, the  
screen image input from the VISUAL terminal  
is output to the rear monitor.  
[p] key  
[R] , [F] key  
• The remote control unit cannot be used to  
perform scan, repeat or random play.  
• This unit can display the Podcast titles*, Artist  
names, Album titles, Song titles, Genre names,  
Playlist titles, Composer names and Audio  
Book titles* registered on the iPod. When no  
data is present, the title display will remain  
blank.  
iPod menu screen operation keys  
[MENU] key  
• Displays the Option menu screen.  
List keys  
• Displays the corresponding list screen.  
[Podcasts], [Artists], [Albums], [Genres]  
and [Playlists] are available from the iPod  
menu screen. [Audio Books],  
[Composers] and [Songs] are only  
available from the Option menu screen.  
[Shuffle] key  
* Whether these functions are available or not  
depends on the iPod version.  
• The iPod is used with the equalizer function  
turned OFF.  
• Use to switch the shuffle mode, in the order:  
Song Shuffle Album Shuffle Shuffle  
OFF.  
The default value is Shuffle OFF.  
When enabled, this function performs  
playback of tracks in random order,  
regardless of the order in which they are  
recorded.  
Precautions regarding battery  
consumption:  
When the iPod’s internal battery becomes  
depleted, the recharge warning indicator  
will appear in the iPod’s display. In this  
condition, the iPod cannot be played even if  
attached to the VRX765VD. Also, the  
VRX765VD’s recharging function cannot be  
used to recharge the iPod.  
As a result, when the iPod’s battery  
becomes depleted, use the dedicated  
charger provided with it to recharge the  
battery.  
[p] key  
• Use to control playback and pause.  
[R], [F] keys  
• Use to perform track selection. Touch and  
hold to enable fast-forward or fast-  
backward.  
48  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
iPod Operations  
Note:  
Play mode menu  
The title display (*) shows, from top level down, the  
SONG title, ARTIST name, and ALBUM title. Press  
the operation display to scroll the SONG title.  
• Uses to switch the shuffle mode and repeat  
mode.  
List keys  
Operation display  
• Displays the corresponding list screen.  
[Podcasts], [Artists], [Albums], [Genres],  
[Playlists], [Audio Books], [Composers]  
and [Songs] are available.  
[Back] key  
Play/Pause icon(p) display  
Track No.  
• Uses to return to the iPod menu screen.  
Audio Books menu  
Clock time  
• Uses to change the playback speed during  
playing Audio Books.  
Play mode (*1)  
[Pod Color] key  
Song title/  
Artist name/  
• Changes the background color of the iPod  
menu screen.  
Album title (*2)  
[Pod Color]: changed to the color of the  
Progress/  
Volume indicator  
connected iPod.  
[Normal Color]: changed to light blue.  
Play time  
Remaining time  
Pausing playback  
1. Press the [p] button or touch the [p]  
Note:  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
or touch the [p] key again.  
Playback resumes.  
*1 Displays status of Repeat, Shuffle play.  
1
A
S
A
: 1-track Repeat  
: All Repeat  
: Song Shuffle  
: Album Shuffle  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
*2 When a Podcast or Audio Book which has  
two or more chapters is played back, the  
chapter title and chapter number are  
displayed.  
playback.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
Option menu screen operation keys  
List keys [Back] key  
Play mode menu  
* When a Podcast or Audio Book which has two  
or more chapters is played back, pressing the  
[R] or [F] button during pausing moves  
the current location to the beginning of the  
previous or next chapter.  
[Pod Color] key  
List keys  
Audio Books menu  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
iPod Operations  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
Viewing video data in the iPod (only  
for the iPod with video features)  
When you connect an iPod with video features by  
using the optional connector cable for iPod with  
video (released soon), you can enjoy the video  
data and slideshow data stored in the iPod  
showing them on the liquid crystal panel of this  
unit (and the rear monitor if connected).  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes to the normal  
speed playback.  
TOP function  
The TOP function resets the player to the first  
track of the tracks to play.  
Note:  
Do not connect the iPod to this unit when a Video  
Playlists item is selected on the iPod.  
1. Press the [BAND] button to playback the first  
1. Touch and hold the [MENU] key on the iPod  
menu screen for more than 1 second. The  
screen will be changed to a black screen.  
In this condition, the iPod cannot be controlled  
from this unit. The iPod is turned into the  
normal operation mode, and you can control  
the iPod using the original controls of the iPod  
(iPod operation mode).  
track of the current list.  
* To playback all of the tracks in the Songs list  
from the first track, keep pressing the [BAND]  
button more than 1 second.  
Selecting a list item from a list screen  
1. Touch the desired List key from the iPod  
menu screen or the Option menu screen to  
display the corresponding list screen.  
2. Touch a desired list item on the screen to  
display the corresponding list of tracks.  
• Use the [v] and [V] keys to scroll the list.  
2. Play back your desired video data or  
slideshow data from the iPod.  
The specified image data will be displayed on  
the liquid crystal panel (and the rear monitor if  
connected).  
* Skip this operation for the Podcasts, Audio  
3. To return to the iPod menu screen, touch the  
screen.  
* When you touch the screen during playing back  
image data, the playback is terminated and the  
first track of the first playlist will be played back.  
Books and Songs list.  
3. Touch the desired track name on the list to  
playback.  
• Use the [v] and [V] keys to scroll the list.  
Note:  
Image data may not be played back according to  
the status of the iPod.  
If you turn off the power of this unit or change the  
operation mode during the iPod operation mode,  
the iPod will be turned off. When it resumes to the  
iPod mode, the iPod will be turned on and resumed  
to the last playback mode.  
50  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
VISUAL Operations  
This function is available when a VTR, etc. is connected to the visual terminal.  
Changing the audio input level  
The visual terminal can be used to change the  
input audio level.  
* The factory default setting is “HIGH”.  
1. Touch the screen to display the menu, then  
WARNING  
For your safety, the driver should not watch  
the VTR, etc. or operate the controls while  
driving. Please note that watching and  
operating the VTR, etc. while driving are  
prohibited by law in some countries.  
repeat touching the [SENS] key to select the  
level.  
HIGH: 16.25 dB  
MID: 3.75 dB  
LOW: 0 dB  
Switching to the VISUAL mode  
Note:  
For your safety, the VRX765VD has a safety  
function which turns off the picture when the car is  
moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking brake is applied.  
1. Press the [SRC] button, and touch the  
[VISUAL] key.  
CD Changer Operations  
Note:  
Displaying the CD TEXT titles  
This operation is only possible when this unit is  
connected with a CD TEXT compatible CD  
changer.  
When an optional CD (DVD) changer is connected  
through the CeNET cable, this unit controls all CD  
(DVD) changer functions. This unit can control up  
to 2 changers (CD and/or DVD).  
1. Touch the [Title] key.  
2. Touch the [X] key of the Disc, Artist, or Track  
item to cause the respective display to scroll  
once.  
CD changer functions  
Press the [SRC] button and touch the [CD  
CHANGER] key to change to the CD changer  
mode. Playback automatically starts.  
* If 2 CD changers are connected, the [CD  
CHANGER 1] and [CD CHANGER 2] keys will  
display in the Source menu.  
Selecting a CD and track from the  
list  
1. Touch the [List] key.  
* If “NO MAGAZINE” appears in the display, insert  
the magazine into the CD changer. “DISC  
CHECKING” appears in the display while the  
player loads (checks) the magazine.  
* If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
2. Touch the corresponding Disc key (1 to 6) to  
select the desired disc.  
The Track List screen appears.  
* When the touching and holding a Disc key for  
more than 1 second, the title will scroll.  
3. When the desired track is not displayed, touch  
the [v] or [V] key to scroll the track list.  
4. Touch the desired Track key.  
Pausing play  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses and “PAUSE” appears in  
the screen.  
2. To resume playback, press the [p] button  
or touch the [p] key.  
The corresponding track is started playback.  
* When the touching and holding a Track key for  
more than 1 second, the title will scroll.  
5. Touch the [Back] key to return to the Disc List  
screen.  
Touch the [Back] key again to return to the  
CD CHANGER mode screen.  
Playback resumes.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
CD Changer Operations  
Switching to a next disc. (Disc Up  
function)  
Other various play functions  
1. Touch the [Option] key.  
The disc up function plays from the first track  
(track No.1) of the next disc.  
1. Press the [BAND] button.  
The disc changes to the next disc.  
Searching with a track number  
* This function is available only for the current disc.  
1. Touch the [Search] key.  
2. Input the track number that you want to play  
back with [0] to [9] key.  
3. Touch the [ENT] key.  
2. Touch the touch key of the function you want  
to play.  
[Track Scan] : (track scan playback)  
This scan play locates and plays the first 10  
seconds of each track on a disc automatically.  
[Disc Scan] : (disc scan playback)  
This scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer.  
Playback starts from the track of the input  
track number.  
• If the input track number does not exist or  
searching with a track number is not  
allowed, the screen image will not change.  
4. Touch the [Back] key.  
[Track Repeat] : (track repeat playback)  
The repeat play continuously plays the  
current track.  
Skipping a track (searching)  
* This function is available only for the current disc.  
[Disc Repeat] : (disc repeat playback)  
After all tracks in the current disc have been  
played, the disc repeat play automatically  
replays the current disc over from the first  
track.  
[Track Random] : (track random playback)  
The random play selects and plays individual  
tracks on the disc in no particular order.  
[Disc Random] : (disc random playback)  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order.  
1. Press the [R] or [F] button during  
playback.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
3. To cancel the play, touch the key of the  
function to cancel.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
4. Touch the [Back] key to return to the previous  
screen.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes to the normal  
speed playback.  
52  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
DVD Changer Operations  
Only basic operations of DVD changer can be  
performed from the unit. Use the remote control  
unit to perform the following functions.  
• Scan, Repeat, Random functions  
• Video CD Playback function ON/OFF  
• DVD Setup function, Audio, Subtitle, Angle  
setting function  
For details on operations other than those  
described below, see the pages of “DVD Video  
Player Operations”.  
Selecting a disc from the list  
1. Touch the [List] key.  
2. Touch the corresponding Disc key (1 to 6) to  
select the desired disc.  
The disc changes to the specified disc.  
Switching to a next disc (Disc Up  
function)  
1. The disc up function plays from the first track  
(track No.1) of the next disc.  
For details on DVD changer precautions, refer to  
the supplied owner’s manual.  
Press the [BAND] button.  
Each time you press the [BAND] button, the  
disc changes to the next disc.  
Note:  
When the DVD changer (VCZ625) is connected via  
optical cable, no sound will be output if AUDIO  
OUT is switched to ANALOG on the changer’s  
GENERAL SETUP” menu.  
TV Operations  
TV functions  
Watching a video  
To watch TV, requires a TV tuner. When an  
optional TV tuner is connected through the  
CeNET cable, this unit controls all TV tuner  
functions.  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12V video cassette player (VCP) or video  
cassette recorder (VCR) to the TV tuner input  
terminal.  
WARNING  
1. Touch the screen to display the TV/VTR mode  
menu, then touch the [Option] key.  
2. Touch the [VTR] key to change to the VTR  
mode.  
For your safety, the driver should not watch  
the TV or operate the controls while driving.  
Please note that watching and operating  
the TV while driving are prohibited by law in  
some countries.  
• To return to the TV broadcast, perform the  
same operation again.  
Seek tuning  
1. Press the [BAND] button or touch the [Band]  
key to select the desired TV band (TV1 or  
TV2).  
Watching TV  
Note:  
For your safety, the VRX765VD has a safety  
function which turns off the picture when the car is  
moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking brake is applied.  
If “AUDIO ONLY” appears on the screen just after  
turning on the ACC power of the car, release the  
parking brake while confirming safety, and then  
engage the parking brake again.  
* If “MANU” is displayed in the display, press  
and hold the [BAND] button for more than 1  
second. “MANU” in the display goes off.  
2. Touch the [X] or [x] key to automatically  
seek a station.  
• Touching the [x] key to tune up the channel  
to the next available TV station, and the [X]  
key to tune down.  
1. Press the [SRC] button, and touch the [TV/  
VTR] key.  
2. Press the [BAND] button or touch the [Band]  
key to select the desired TV band (TV1 or  
TV2).  
Every pressing the button toggles the TV  
band between TV1 and TV2.  
3. Press the [R] or [F] button to tune in the  
previous or next preset TV station.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
TV Operations  
Selecting with a channel number  
1. Touch the screen to display the TV/VTR  
Recalling a preset station  
A total of 12 TV stations can be stored (6-TV1  
mode menu, then touch the [Search] key.  
and 6-TV2).  
There are 2 ways available to recall the preset  
station.  
2. Enter the channel number corresponding with  
the station you desired by touching the [0] to  
[9] key.  
Using the [R] or [F] button  
• If you touch the wrong number ([0] to [9]  
key), you can delete it to touch the [CLR]  
key.  
1. Press the [BAND] button or touch the [Band]  
key to select the desired TV band. (TV1 or  
TV2)  
2. Press the [R] or [F] button to recall a  
stored TV station.  
Using the Preset List screen  
3. Touch [ENT] key. The TV station you required  
would be tuned.  
4. Touch the [Back] key.  
1. Touch the screen to display the menu, then  
Manual tuning  
touch the [List] key.  
There are 2 ways available: Quick tuning and  
step tuning. When you are in the step tuning  
mode, the channel changes one step at a time. In  
quick tuning mode, you can quickly tune the  
desired frequency.  
2. Touch the corresponding Preset key to recall  
the stored station.  
* You can select the desired band by touching  
the [Band] key.  
* Touching and holding the desired Preset key  
for more than 2 seconds will store the current  
station into the preset memory.  
1. Press the [BAND] button or touch the [Band]  
key to select the desired band. (TV1 or TV2)  
* If “MANU” is not displayed in the display, keep  
pressing the [BAND] button more than 1  
second. “MANU” appears and manual tuning is  
now available.  
3. Touch the [List] key again to return to the  
previous screen.  
Manual memory  
2. Tune into a station.  
1. Touch the [Band] key to select the desired TV  
Quick tuning:  
band. (TV1 or TV2)  
2. Tune in the desired TV station to be stored.  
3. Touch the [List] key.  
4. Touch and hold one of the Preset key for more  
than 2 seconds to store the current station into  
the preset memory.  
Touch and hold the [X] or [x] key for more  
than 1 second to tune in a station.  
Step tuning:  
Touch the [X] or [x] key to manually tune in  
a station.  
Note:  
Manual tuning is cancelled if you do not operate  
the unit for 7 seconds (Only when connecting the  
TTX7503Z or TTX7504Z with this unit).  
Auto store  
Auto store selects 6 TV stations automatically  
and stores each one into a preset memory. If 6  
stations cannot be received with good reception,  
previously stored station remain and only the  
strong stations are stored into memory.  
1. Touch the [Band] key to select the desired TV  
band. (TV1 or TV2)  
2. Touch the [List] key.  
3. Touch and hold the [AS] key for more than 2  
seconds.  
A beep sounds and the stations with good  
reception are stored automatically to the  
preset channels.  
54  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
TV Operations  
Preset scan  
Preset scan shows each preset channel before it  
automatically advances to the next preset. This  
function is useful for searching for desired TV  
station in memory.  
1. Touch the screen to display the TV/VTR  
menu, then touch [List] key.  
2. Touch the [PS] key to start preset scan. The  
unit starts scanning each station for 7  
seconds sequentially.  
3. When the desired channel is received, touch  
the [PS] key again.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
* This function is enabled only when the panel is  
open.  
* Normally use the TV diver with the “ON” position.  
1. Touch the screen to display the TV/VTR  
menu, then touch [Option] key.  
2. Touch the [ON] or [OFF] key of the TV DIVER  
item to turn this function on and off.  
[ON] :  
Sets reception emphasizing the visual.  
[OFF] :  
Sets the diver setting to OFF.  
3. Touch the [Back] key to return to the previous  
mode.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Satellite Radio Operations  
This function is available when a Satellite Radio  
Receiver is connected through the CeNET cable.  
This unit can control the following satellite radio  
receivers:  
• XM Satellite Radio Receiver: XMD1000  
• XM Smart Digital Adapter: XM SDA  
• SIRIUS Satellite Radio Receiver: SIRCL2,  
SIRCL3  
Confirming your Radio ID  
XM  
1. Touch the [Search] key to display the Key  
Pad screen.  
2. Touch the [0] key, then touch the [ENT] key.  
Your Radio ID (8-digits number) will be  
displayed.  
3. To return to the previous screen, touch the  
[Back] key.  
SIRIUS  
Note:  
When the function is differ depending to the  
connected receiver, they are distinguished by the  
following notations:  
“XM”: for an XM Satellite Radio Receiver  
“SIRIUS”: for a SIRIUS Satellite Radio Receiver  
1. Touch the [Option] key to display the Option  
screen.  
Your SIRIUS ID (12-digits number) will be  
displayed.  
Selecting a Satellite Radio mode  
1. Press the [SRC] button, and touch the  
[SIRIUS] or [XM] key.  
2. To return to the previous screen, touch the  
[Back] key.  
The system changes to the specified Satellite  
Radio mode.  
Displaying channel labels  
1. Touch the [Title] key.  
Category, CH.Name, Title, Artist and R-Text  
are displayed.  
2. Touch the [X] key of desired item.  
The label of specified item will scroll once.  
Displaying radio text  
* Radio text is only displayed for stations that  
transmit such information.  
Received radio text is displayed in the Main  
menu and the Title screen labeled as “R-Text”.  
You can scroll the radio text in the Title screen.  
1. Touch the [Title] key.  
2. Touch the [X] key of the “R-Text” item.  
Selecting a band  
1. Press the [BAND] button or touch the [Band]  
key to select a band.  
This changes the reception band as follows:  
• XM: XM1 XM2 XM3 XM1 ...  
• SIRIUS: SR1 SR2 SR3 SR1 ...  
The received radio text will scroll once.  
Information displayed during reception  
Channel selection  
The following information is displayed when the  
satellite radio cannot be received normally.  
• When the receiver is turned on the first time or  
after a reset: “UPDATING”  
• When a channel is being tuned in (no signal is  
yet received):  
XM; “LOADING”, SIRIUS; “ACQUIRING”  
• A channel without a broadcast has been  
selected:  
Channels are selected with the [R] or [F]  
button.  
* For details, see the following operation  
descriptions.  
Note:  
The audio output is muted and other button  
operations are not accepted during channel  
selection.  
XM; “– – – CH”, SIRIUS; “INVALID CHANNEL”  
• A channel not covered by your contract:  
XM; “UPDATING”, SIRIUS; “CALL 888↔  
539 SIRI” (alternated)  
• When your contract is expired: “SUB UPDATE”  
56  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Satellite Radio Operations  
Selecting a station with the channel  
number  
Recalling a preset station  
A total of 18 satellite radio stations can be stored  
(6-XM1, 6-XM2 and 6-XM3 for XM; or 6-SR1, 6-  
SR2 and 6-SR3 for SIRIUS). This allows you to  
store your favorite satellite radio stations in  
memory for later recall.  
1. Touch the [Search] key.  
2. Enter the channel number of your desired  
station by touching the [0] to [9] keys.  
If you enter a wrong number, you can cancel  
it by touching the [CLR] key.  
1. Touch the [List] key.  
2. Press the [BAND] button or touch the [Band]  
3. Touch the [ENT] key.  
key to select the desired band.  
The radio channel you entered will be tuned.  
3. Touch the corresponding Preset key (1 to 6)  
to recall the desired preset station.  
4. Touch the [Back] key.  
* Touching and holding the desired Preset key  
for more than 2 seconds stores the current  
station into preset memory.  
Tuning mode (T-MODE)  
There are two channel selection modes: seek  
mode and manual mode.  
4. Touch the [Back] key to return to the previous  
Seek tuning  
screen.  
Only channels that can be received are selected.  
Channels without broadcasts and channels not  
covered by the contract will be skipped.  
Receiving stations selected by  
category  
Satellite Radio allows you to select broadcast  
channel category (contents).  
1. Touch the [X] or [x] key.  
The receiver seeks the next available channel  
below or above the current channel.  
1. Touch the [CAT] key.  
Selecting from preset categories  
2. Touch and hold the [X] or [x] key.  
The receiver continues to seek channels  
below or above the current channel while  
touching the key. When the key is released,  
the receiver receives the next available  
channel.  
1-1. Touch the [List] key to display the Preset  
Category screen.  
1-2. Select a category by touching a Category  
Preset key (1 to 6) that the desired category  
is stored.  
Manual tuning  
Any channel including channels without  
broadcasts or channels not covered by the  
contract can be selected during manual tuning.  
1. Keep pressing the [BAND] button or the  
[Band] key more than 1 second.  
Selecting by displaying all categories  
1-1. Touch the [v] or [V] key to scroll the  
category list.  
The seek mode is changed to the manual  
tuning mode, and the “MANU” indicator is  
displayed on the screen.  
1-2. Touch the desired Category item key to  
select the category.  
2. Touch the [X] or [x] key to tune in a station.  
This starts seek tuning and channels that  
meet the specified category are selected.  
Note:  
The receiver automatically reverts to the seek  
tuning mode when the [X] or [x] key is not used  
for 7 seconds in the manual tuning mode.  
Note:  
When the category selection mode is entered, the  
category of the last received channel is displayed  
first.  
The category selection mode is canceled when no  
channel with the selected category can be found.  
The [X] and [x] keys are not touched within 7  
seconds, the category selection mode is canceled,  
and resumes to the normal seek mode.  
2. Touch the [X] or [x] key.  
The receiver moves to channels above or  
below the current channel one by one.  
3. Touch and hold the [X] or [x] key for more  
than 1 second.  
The receiver continues to seek channels  
below or above the current channel while  
touching the key. When the key is released,  
the receiver receives the channel received at  
that time.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Satellite Radio Operations  
Presetting a category  
A category can be preset by registering specific  
categories in Category Preset keys 1 to 6. Then  
the desired category can be recalled by pressing  
the corresponding Category Preset keys.  
1. Touch the [CAT] key.  
2. Touch the [v] or [V] key to scroll the category  
list.  
3. Touch the Category item key you wish to  
store in memory.  
4. Touch the [List] key to display the Preset  
Category screen.  
5. Touch and hold the desired Category Preset  
key for more than 2 seconds to store the  
currently selected category to that Category  
Preset key.  
Note:  
When the name of a channel stored in memory is  
changed by a broadcast station, the display may  
show a channel name that differs from the stored  
name.  
A channel stored in memory may be discontinued  
at the option of the broadcast station.  
Scan function  
There are two scan modes: the category scan  
mode and the preset scan mode.  
During scanning channels are displayed in  
abbreviated form, the display mode cannot be  
switched.  
Category scanning  
In a category scan, broadcast channels in the  
same category as the current channel are  
selected about every 10 seconds.  
1. Touch the [List] key.  
2. Touch the [PS] key.  
• The category scanning can also be  
performed by touching the [CS] key in the  
Preset Category screen.  
Note:  
Category scanning is not available when no  
category is defined for the current channel.  
Preset scan  
A preset scan scans the channels (up to 18  
channels) stored in the preset memory about  
every 10 seconds.  
1. Touch the [List] key.  
2. Touch and hold the [PS] key for more than 1  
second.  
58  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
5.1 ch Surround Decoder Operations  
This function is available when an optional 5.1 ch  
Surround Decoder (DVH940) is connected.  
When the 5.1 ch Surround Decoder is connected  
through the CeNET cable, the 5.1 ch Surround  
Decoder Control unit (DVC940, optional) cannot  
be used.  
SPEAKER SEL (speaker selection)  
This function determines center speaker,  
surround speaker and sub woofer connection.  
3-1. Touch the []] key of the SPEAKER SEL item  
to show the submenu.  
3-2. Touch the [ON] or [OFF] key of the CENTER  
SP, SURROUND SP or SUB WOOFER  
item to turn speakers on or off, depending  
on what speakers are connected.  
5.1 ch Surround Decoder control  
function  
This section describes operation procedures of  
setting functions.  
For details on each functions, refer to the owner’s  
manual supplied with the 5.1 ch Surround  
Decoder.  
• The factory default setting is “ON”  
• The phase of the “SUB WOOFER” is  
reversed in the “ON-” setting. The default  
value is “ON+”.  
Dolby PL II CONTROL  
* Requires an optional amplifier.  
* This function is available only when the MUSIC  
MODE is selected for Dolby PL II. For setup  
details, see “Selecting the Dolby PL II (Dolby  
Pro Logic II) type”.  
Note:  
The 2-ZONE mode is disabled when the DVH940  
is connected.  
1. Pressthe[ADJ]buttonto displaytheADJUST  
menu.  
3-1. Touch the []] key of the Dolby PL II CONT.  
item to show the submenu.  
3-2. Perform setting for the PANORAMA,  
DIMENSION or CENTER WIDTH item.  
[PANORAMA]:  
Touch the [ON] or [OFF] key to select. “OFF”  
is the default value.  
[DIMENSION]:  
Touch the [[] or []] key to adjust the level  
between 0 and 6. The default level is “3”.  
2. Touch the [AUDIO EXT.] key.  
[CENTER WIDTH]:  
Touch the [[] or []] key to adjust the level  
between 0 and 7. The default level is “3”.  
3. Perform setting for the desired item.  
See the following sections for details.  
4. Touch the [Back] key to return to the previous  
screen.  
* In the following sections, only the details  
regarding settings are described, procedures  
to select setting items are skipped.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
5.1 ch Surround Decoder Operations  
FILTER  
DELAY  
This function is used to select filter frequencies  
that suit the speakers that are used.  
* This function is not available for speakers whose  
SPEAKER SEL setting is set to “OFF”.  
This function adjusts the timing of the speakers  
so that they are synchronized with front speaker  
output.  
* This function is not available for speakers whose  
SPEAKER SEL setting is set to “OFF”.  
3-1. Touch the []] key of the FILTER item to  
show the submenu.  
3-1. Touch the []] key of the DELAY item to show  
the submenu.  
3-2. Touch the [[] or []] key of the FRONT HPF,  
CENTER HPF, SURROUND HPF or SUB  
WOOFER LPF item to adjust.  
3-2. Touch the [[] or []] key of the CENTER SP  
or SURROUND SP item to adjust.  
[FRONT HPF]:  
[CENTER SP]:  
Adjustments are made in the range from 0  
ms to 5 ms. The default value is “0 ms”.  
This function can be set to the following four  
settings: 50 Hz, 80 Hz, 120 Hz or THRGH  
(through). “THRGH” is the default value.  
[SURROUND SP]:  
Adjustments are made in the range from 0  
ms to 15 ms. The default value is “0 ms”.  
[CENTER HPF]:  
This function can be set to the following  
three settings: 50 Hz, 80 Hz and 120 Hz.  
120 Hz” is the default value.  
DRC  
This function sets the dynamic range  
compression.  
[SURROUND HPF]:  
This function can be set to the following four  
settings: 50 Hz, 80 Hz, 120 Hz or THRGH  
(through). “THRGH” is the default value.  
3-1. Touch the [C] key to display the next menu  
screen.  
3-2. Touch the [MAX], [STD] or [MIN] key of the  
DRC item to select respective item.  
* The default value is “MAX”.  
[SUB WOOFER LPF]:  
This function can be set to the following  
three settings: 50 Hz, 80 Hz and 120 Hz.  
120 Hz” is the default value.  
SPEAKER GAIN  
This function sets speaker output level.  
* This function is not available for speakers whose  
SPEAKER SEL setting is set to “OFF”.  
3-1. Touch the []] key of the SPEAKER GAIN  
item to show the submenu.  
3-2. Touch the [[] or []] key of the FRONT L,  
CENTER, FRONT R, SURROUND R,  
SURROUND L or SUB WOOFER item to  
adjust.  
Each item is adjustable in the range –10 dB  
to +10 dB in 1 dB step increments. The  
default value is “0 dB”.  
60  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
5.1 ch Surround Decoder Operations  
Setting and storing P.EQ Properties  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
DSF mode  
DSF effect ON/OFF  
* The factory default setting is “OFF”.  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the P.EQ item to display  
the submenu.  
3. Touch the key for the desirable type to select.  
The P.EQ adjustment contents are as follows:  
[SIGNAL]:  
This function selects “MUSIC” or “P. NOISE”.  
* The factory default setting is “P.NOISE”.  
[SPEAKER SELECT]:  
This function selects “FRONT”, “CENTER” or  
SURROUND”.  
* The factory default setting is “FRONT”.  
* This setting is disabled when both the  
CENTER SP and SURROUND SP items of the  
SPEAKER SEL setting are set to “OFF”.  
2. Touch the []] key of the STATUS item.  
3. Touch the [ON] or [OFF] key of the DSF item  
to set the function ON or OFF.  
* This function is not available for speakers  
whose SPEAKER SEL setting is set to “OFF”.  
4. Touch the [Back] key to return to the previous  
screen.  
Note:  
If the DSF effect is set to OFF, the adjustment  
made in “DSF” is not reflected in the music source.  
[BAND]:  
Select the channel to be compensated  
(“BAND1”, “BAND2”, “BAND3”).  
* The factory default setting is “BAND1”.  
[FREQUENCY]:  
Selecting the DSF type  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the DSF item.  
3. Touch the key for the desirable type to select.  
Select the center frequency that you want to  
compensate from the range of 18 Hz to  
20 kHz. (1/3 octave step, 31 points)  
* The factory default setting is “1 kHz”.  
[Q]:  
4. Touch the [Back] key to return to the previous  
Set the sharpness of the Q-curve to one of the  
parameters: 1, 3, 5, 7 and 20.  
* The factory default setting is “1”.  
screen.  
P.EQ mode  
[GAIN]:  
Adjust the gain (output level) in the range of  
–6 dB to +6 dB. (1 dB step, 13 points)  
* The factory default setting is “0”.  
P.EQ effect ON/OFF  
* The factory default setting is “OFF”.  
4. Touch the [Back] key to return to the previous  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
screen.  
2. Touch the []] key of the STATUS item.  
3. Touch the [ON] or [OFF] key of the P.EQ item  
to set the function ON or OFF.  
4. Touch the [Back] key to return to the previous  
screen.  
Note:  
If the P.EQ effect is set to OFF, the adjustment  
made in “P.EQ” is not reflected in the music  
source.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
5.1 ch Surround Decoder Operations  
Balance/Fader adjustment  
Selecting the Dolby PL II (Dolby Pro  
Logic II ) type  
3-1. Touch the []] key of the BAL/FAD item.  
Touch the [{] or [}] key to adjust the fader  
level.  
* The factory default setting is “OFF”.  
* This setting is disabled when both the CENTER  
SP and SURROUND SP items of the SPEAKER  
SEL setting are set to “OFF”.  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the Dolby PL II item.  
3. Touch the key for the desirable type to select.  
[{] key :  
emphasized the sound from the front  
speakers.  
[}] key :  
emphasized the sound from the rear  
speakers.  
4. Touch the [Back] key to return to the previous  
3-2. Touch the [[] or []] key to adjust the balance  
screen.  
level.  
Output adjustment of subwoofer  
volume, center volume and balance/  
fader  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the DETAIL item to  
display the submenu.  
3. Perform the following adjustments:  
[[] key :  
emphasized the sound from the left  
speakers.  
[]] key :  
emphasized the sound from the right  
speakers.  
4. Touch the [Back] key to return to the  
previous screen.  
Subwoofer volume adjustment  
3-1. Touch the [[] or []] key of the  
SUBWOOFER VOL item to adjust to  
desirable level (Setting range : –6 to 3).  
* The factory default setting is “0”.  
Center volume adjustment  
3-1. Touch the [[] or []] key of the CENTER VOL  
item to adjust to desirable level (Setting  
range : –6 to 0).  
* The factory default is “0”.  
62  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
12.IN CASE OF DIFFICULTY  
GENERAL  
Problem  
Cause  
Measure  
Power does not turn Fuse is blown.  
on. (No sound is  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
Nothing happens  
when buttons are  
pressed.  
The microprocessor has  
malfunctioned due to  
noise, etc.  
Turn off the power and remove the DCP. Press the  
reset button for about 2 seconds with a thin rod.  
Note:  
When the Reset button is pressed, turn off the ACC  
power.  
Display is not  
accurate.  
The Reset button  
* When the Reset button is pressed, frequencies of  
TV/radio stations, titles, etc. stored in memory are  
cleared.  
The remote  
controller does not  
work.  
Direct rays of the sun fall on When direct rays of the sun fall on the light-  
the light-receptive part of  
the remote controller.  
receptive part of the remote controller, it may not  
work.  
The batteries of the remote Check the batteries of the remote controller unit.  
controller unit are dead or  
there is no battery in the  
remote controller unit.  
DVD Player  
Problem  
Cause  
Measure  
Disc cannot be  
loaded.  
Another disc is already  
loaded.  
Eject the disc before loading the new one.  
There is a foreign matter  
already in place.  
Eject the foreign matter forcibly.  
Sound skips or is  
noisy.  
Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad directly Water droplets may form  
after power is turned on the internal lens when  
Let dry for about 1 hour with the power on.  
Check that the parking brake is engaged.  
on.  
the car is parked in a humid  
place.  
The image is not  
displayed.  
The parking brake is not  
engaged.  
Disccannotplaywith The view is limited.  
the display  
PARENTAL  
VIOLATION” shown.  
Release the view limitation or change the parental  
level.  
See the subsection “Setting up the parental  
level”.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
TV/VTR(When connecting an optional TV tuner, etc.)  
Problem  
Cause  
Measure  
The image is not  
displayed.  
The parking brake is not  
engaged.  
Check that the parking brake is engaged.  
The display is dark. The brightness control is  
too low.  
Adjust the brightness properly.  
The operating condition is The temperature inside the vehicle may be 0°C or  
not good.  
lower. Set to an appropriate temperature (25°C or  
so) and check it again.  
The headlight of the vehicle The display is made dark at night to prevent the  
is lit.  
glare (When the headlight of the vehicle is lit in the  
daytime, the display gets dark).  
The color of the  
display is light or a  
shade of color is not  
good.  
The color is not adjusted  
adequately.  
Check that Color and Hue are adjusted properly.  
When the VTR is  
connected, the  
Improper NTSC/PAL  
setting  
Set the NTSC/PAL properly according to the VTR.  
image is disturbed.  
When the TV tuner is Bad receiving condition  
connected, the  
image gets unclear.  
A radio wave may not reach sufficiently due to  
obstruction of mountains or buildings. Check it  
again at a place where a radio wave can be  
received properly.  
The TV tuner has a Bad receiving condition  
double or triple  
image.  
It may be under the influence of radio wave  
reflected by mountains or buildings. Check it again  
after changing place or direction.  
The TV tuner has  
spots or stripes in  
the image.  
Presence of jamming  
It may be under the influence from automobiles,  
streetcar, power cable, neon sign, and so forth.  
Check it again after changing place.  
There are red,  
green, and blue  
points in the display.  
This is not a failure, but a phenomenon peculiar to  
a liquid crystal panel (The liquid crystal panel is  
produced according to technology with very high  
precision. Note that, though there are effective  
pixels of 99.99% or more, pixel missing or  
normally lit pixels account for 0.01%).  
64  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
13.ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to solve the problem.  
DVD PLAYER  
Problem  
ERROR 2  
Cause  
Measure  
A CD is caught inside the  
CD deck and is not ejected. consult your store of purchase.  
This is a failure of CD deck’s mechanism and  
ERROR 3  
ERROR 6  
A CD cannot be played due Replace with a non-scratched, non-warped disc.  
to scratches, etc.  
A CD is loaded upside-  
down inside the CD deck  
and does not play.  
Eject the disc then reload it properly.  
CD CHANGER  
Problem  
Cause  
Measure  
ERROR 2  
A CD inside the CD  
changer is not loaded.  
This is a failure of CD changer’s mechanism and  
consult your store of purchase.  
ERROR 3  
ERROR 6  
A CD inside the CD  
changer cannot be played  
due to scratches, etc.  
Replace with a non-scratched, non-warped disc.  
A CD inside the CD  
changer cannot be played  
because it is loaded  
upside-down.  
Eject the disc then reload it properly.  
For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.  
If an error display other than the ones described above appears, press the Reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
* When the reset button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are cleared.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
14.SPECIFICATIONS  
FM Tuner  
Frequency Range: 87.9 MHz to 107.9 MHz  
Usable Sensitivity: 9 dBf  
50dB Quieting Sensitivity: 15 dBf  
Alternate Channel Selectivity: 70 dB  
Stereo Separation (1 kHz): 35 dB  
Frequency Response (±3 dB): 30 Hz to 15 kHz  
LCD Monitor  
Screen Size: 7-inch wide type  
6" Width (152 mm) × 3-5/16" Height (85 mm)  
Display method:  
Transmission type TN liquid crystal display  
Drive method: TFT (thin-film transistor)  
active matrix driving  
Pixels: 336,960 (1440 × 234)  
AM Tuner  
General  
Power source voltage:  
Frequency Range: 530 kHz to 1710 kHz  
Usable Sensitivity: 28 dBµV  
14.4 V DC (10.8 to 15.6 V allowable)  
Ground: Negative  
Current consumption: 4.0 A (1 W)  
Auto Antenna Rated Current: 500 mA less  
Dimensions of the Main Unit:  
7" Width (178 mm) × 1-15/16" Height  
(50 mm) × 6-1/2" Depth (165 mm)  
Weight of the Main Unit: 2.4 kg  
Dimensions of the Remote Control Unit:  
2-1/8" Width (54 mm) × 1-1/8" Height  
(28.8 mm) × 6-1/8" Depth (155 mm)  
Weight of the Remote Control Unit:  
100 g (including battery)  
DVD Player  
System:  
Digital Versatile Disc System with CDDA  
capable  
Usable discs:  
DVD video disc, Compact disc  
Frequency Response:  
20 Hz to 20 kHz (CD) (±1 dB)  
Dynamic Range: 100 dB (1 kHz)  
Distortion: 0.01%  
Audio Amplifier  
Maximum power output:  
200 W (50 W × 4)  
Speaker impedance: 4 (4 to 8 )  
Input  
Audio input:  
130 ±60mVrms (High)  
600 ±80mVrms (Mid)  
840 ±100mVrms (Low)  
(input impedance 10 kor greater)  
Video input:  
6-3/4" (172 mm)  
7" (178 mm)  
1-15/16"  
(50 mm)  
1.0 ±0.2 Vp-p (input impedance 75 )  
Note:  
Video Output  
Specifications comply with JEITA Standards.  
Specifications and design are subject to change  
without notice for further improvement.  
Video output:  
1.0 ±0.2 Vp-p (output impedance 75 )  
Power Output :  
19 W RMS x 4 Channels at 4 Ω  
and 1 % THD+N  
Signal to Noise Ratio:  
75 dBA (reference: 1 W into 4 )  
66  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION AND WIRE  
CONNECTION MANUAL  
1. BEFORE STARTING  
1. This set is exclusively for use in cars with a  
negative ground 12 V power supply.  
2. Read these instructions carefully.  
3. Be sure to disconnect the battery “-” terminal  
before starting. This is to prevent short circuits  
during installation. (Figure 1)  
Car battery  
Figure 1  
2. PACKAGE CONTENTS  
1 Main unit  
2 Manuals  
Owner’s manual & Installation manual  
Warranty card  
3 Power supply lead  
4 Rca pin cord  
6 Bag for accessories (No. 2)  
Hook plate ................................................... 2  
Cord clamp  
7 Bag for accessories (NO. 3)  
Rca cap ..................................................... 12  
8 Universal mounting bracket  
9 Remote control unit  
5 Bag for accessories (No. 1)  
Flat head screw (M5 × 8)............................. 4  
Sems hexagonal bolt (M5 × 8)..................... 5  
Electro tap  
0 Battery  
(for remote control unit)  
! Outer Escutcheon  
@ DCP Case  
Machine screw (M4 × 3) .............................. 4  
3. GENERAL CAUTIONS  
1. Do not open the case. There are no user-  
serviceable parts inside. If you drop anything  
into the unit during installation, consult your  
dealer or an authorized Clarion service  
center.  
2. Use a soft, dry cloth to clean the case. Never  
use a rough cloth, thinner, benzine, or alcohol,  
etc. For tough dirt, apply a little cold or warm  
water to a soft cloth and wipe off the dirt  
gently.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
4. CAUTIONS ON INSTALLATION  
1. Prepare all articles necessary for installing the  
main unit before starting.  
5. Use the included screws for installation. Using  
other screws can cause damage. (Figure 4)  
2. This model features a liquid crystal panel that  
slides forward (shell loading system).  
On some types of cars, the liquid crystal panel  
may make contact with the dashboard or shift  
lever, in which cause it cannot be installed.  
Before installing, check that the unit will not  
hamper operation of the shift lever or obstruct  
your view before selecting the installation  
location. (Figure 2)  
Chassis Chassis  
Damage  
Max. 8 mm (M5 screw)  
Figure 4  
6. The source unit has mounting screw holes for  
NISSAN (N marks) and TOYOTA (T marks)  
vehicles.  
Dashboard  
T
N
T
Shift lever  
Shift lever  
(check that it does not  
touch the LCD.)  
N
T
N
Figure 2  
Figure 5  
3. Install the unit within 30° of the horizontal  
plane. (Figure 3)  
Max. 30˚  
Figure 3  
4. If you have to do any modification on the car  
body, such as drilling holes, consult your car  
dealer beforehand.  
68  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
5. INSTALLING THE MAIN UNIT  
Note:  
Universal Mount  
*1 Some car models require special mounting kits  
1. Place the universal mounting bracket into the  
instrument panel, use a screwdriver to bend  
each stopper of the universal mounting  
bracket inward, then secure the stopper as  
shown in Figure 6.  
for proper installation. Consult your Clarion  
dealer for details.  
*2 Fasten the front stopper securely to prevent the  
main unit from coming loose.  
2. Wire as shown in Section 8.  
3. Insert the main unit into the universal  
mounting bracket until it locks.  
4. Mount the outer escutcheon so that all the  
hooks are locked.  
Strap  
• Console opening dimensions  
This part is not provided.  
*
7-3/16" (182 mm)  
Instrument panel  
Hole  
Hole  
Stoppers  
Hexagonal  
bolt  
Screwdriver  
Main unit  
Universal mounting bracket  
Stoppers  
2-Spring  
Outer escutcheon  
Note:  
Set the outer escutch-  
eon so that its metallic  
part on the back side  
fits the upper edge of  
the main unit.  
Figure 6  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)  
This unit is designed for fixed installation in the  
dashboard.  
If the vehicle is equipped with a factory-installed  
radio, install the main unit with the parts and  
screws marked (*). (Figure 8)  
If the vehicle is not equipped with a factory-  
installed radio, obtain an installation kit to install  
the main unit in the following procedure.  
1. Remove the screws from both side of the  
main unit. Then, at either side, lift the leaf  
spring until the engaging claws are released  
from the holes, and slide the spring to the  
direction of arrow to remove it. Repeat the  
same for the other side to remove the springs  
from the both sides. (Figure 7)  
2. Secure the mounting brackets to the chassis  
as shown in Figure 8. Holes are pre-tapped  
for TOYOTA and NISSAN vehicles;  
modification, such as drilling new holes, of the  
mounting brackets may be required for other  
models.  
3. Wire as shown in Section 8.  
4. Secure the unit in the dashboard, and then  
reassemble the dashboard and the center  
panel.  
2-Screw  
Engaging claw  
Main Unit  
2-Spring  
Screwdriver  
Figure 7  
Mounting bracket  
(1 pair for the left and right sides)  
4-Hexagonal screw (M5 × 8)  
Main Unit  
Pocket  
Note 2  
Center Panel (Note 1)  
: The screws with this mark are  
enclosed in this set.  
:The parts and screws with this mark  
are used to install radio or included in  
the installation kit.  
Figure 8  
Note 2: If the hook on the installation bracket  
Note 1: In some cases, the center panel may  
require some modification (trimming,  
filling, etc.).  
interferes with the unit, bend and flatten it  
with a nipper or a similar tool.  
70  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
6. REMOVING THE MAIN UNIT  
Note:  
1. When the rear of the main unit has been  
secured with the method shown in Figure 6  
unfasten the special screw.  
Keep the hook plate. You cannot remove the main  
unit without disengaging the hook plate.  
2. Remove the outer escutcheon.  
3. Insert the hook plate between the spring and  
the universal mounting bracket, fit tab B of  
the spring into hole A of the hook plate, then  
pull the main unit out by the hook plate. (Insert  
both the right and left edges of the hook  
plate.) (Figure 9)  
Instrument panel  
Universal mounting bracket  
2-Hook plate  
Main  
Unit  
Spring  
Outer escutcheon  
A
B
Figure 9  
7. CAUTIONS ON WIRING  
Note:  
1. Be sure to turn the power off before wiring.  
There are various types of fuse holder. Do not let  
the battery side touch other metal parts.  
2. Be particularly careful where you route the  
wires.  
Keep them well away from the engine, and  
exhaust pipe, etc. Heat may damage the  
wires.  
caution  
CAUTION  
After the connection, fix the lead by a clamp  
or insulation tape for protection.  
3. If the fuse should blow, check to see if the  
wiring is correct.  
If a fuse is blown, replace it with a new one of  
the same amperage rating as the original  
(15A FUSE).  
Fuse (15A FUSE)  
4. To replace the fuse, remove the old fuse of  
the power supply lead and insert the new one.  
(Figure10)  
Fuse holder  
Figure 10  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
8. WIRE CONNECTION  
Note:  
• Before installing, be sure to disconnect the negative cable of the car battery.  
• In the optional devices, the RCA Pin and the Connector cable are separately-sold items.  
Radio antenna jack  
TV tuner input terminal or  
DVD changer input terminal  
iPod  
Yellow  
Connector cable  
(CCA-670-600)  
CeNET  
terminal  
Optical output  
connector  
Red  
4-Channel Amplifier  
Gray  
Right  
left  
Front audio output  
terminal  
White  
Red  
Black  
Right  
left  
Rear audio output  
terminal  
White  
Red  
Purple  
Gray  
Right  
left  
Non fader  
output terminal  
White  
Yellow  
Rear monitor  
Video output terminal  
Red  
Right  
Green  
(2-ZONE  
output terminal)  
Wireless  
Head phone  
Left  
White  
Yellow  
Video  
VTR etc.  
White  
Red  
Black  
Red  
Visual input  
terminal  
Audio (left)  
Audio (right)  
72  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Yellow  
Black  
+12V main power  
Ground  
Purple  
Rear right +  
Purple/Black  
Red  
Rear right -  
+12V accessory  
Gray  
Front right +  
Front right -  
Gray/Black  
White  
Front left +  
Front left -  
White/Black  
Green  
Rear left +  
Rear left -  
Green/Black  
Blue/White  
Amplifier turn-on lead  
Orange/White  
Blue  
Illumination  
Auto antenna  
Brown  
Phone mute (*1)  
Grass-green  
Parking brake lead  
*1 Connecting the PHONE MUTE terminal  
The lead included with the unit must be connected to the specified  
position of the vehicle’s connector in order to use the “Triggered  
audio mute for cellular telephones” function.  
Connecting the parking brake lead  
Connect the lead to parking brake lamp ground in  
the meter panel.  
Parking brake lamp  
+ lead to battery  
Note:  
Connect these three leads.  
Connecting the parking brake lead to lamp ground  
allows you to watch TV/VTR/DVD video/video CD  
when the parking brake is engaged.  
When the parking brake lead is not connected, the  
monitor will not turn on.  
- cord  
parking  
brake sig-  
nal lead  
Parking brake lead  
(grass-green)  
If “AUDIO ONLY” appears on the screen just after  
turning on the ACC power of the car, release the  
parking brake while confirming safety, and then  
engage the parking brake again.  
Parking brake  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
Connecting the Accessories  
Connection to the external amplifier  
The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For  
detailed information, refer to the instruction manual of the 5.1ch Surround Decoder.  
Connection to the CCD camera for vehicle  
The CCD camera for vehicle can be connected to CCD terminal on the TV tuner. For detailed  
information, refer to the instruction sheet or manual for the CCD camera.  
Note:  
A power supply box (sold separately) is required for connection of the main unit and the CCD camera.  
The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.  
If the specified lead of the cellular phone is connected to the phone mute lead of the source  
unit, the audio mute is available when the cellular phone is used.  
Satellite Radio Receiver  
When a Satellite Radio Receiver is to be connected, use the CeNET connector. For detailed  
information,refer to the instruction manual of the Satellite Radio Receiver.  
TV Tuner  
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For  
detailed information, refer to the instruction manual of the TV tuner.  
DVD Changer  
To connect the TV tuner and the DVD changer simultaneously, use a commercial video selector  
purchasing separately.  
iPod  
When you connect the iPod with video features by using the connector cable CCA-670-600, the video  
data stored in the iPod cannot be displayed on the liquid crystal panel of this unit.  
Use the Clarion’s new connector cable which is released soon.  
74  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
9. SAMPLE SYSTEM  
VRX765VD  
Yellow  
Video  
Selector  
Front  
Speakers  
(Gray)  
RCA video cable  
(included the TV tuner)  
RCA cable  
(sold separately)  
Non fader  
output  
Rear  
Speakers  
CeNET cable  
(included  
the TV tuner)  
4-Channel  
Amplifier  
RCA cable  
(sold separately)  
TV Tuner  
(TTX7501z)  
Center speaker  
built-in amplifier  
CeNET cable  
(SRK5)  
(included the SIRIUS)  
*XM ; sold separately  
Powered sub-woofer  
built-in amplifier  
(SRV303)  
Satellite Radio  
Receiver  
RCA cable (sold separately)  
CeNET CD Changer  
(DCZ625)  
RCA cable  
(included  
CeNET cable  
(included the  
DVH940)  
the DVH940)  
CeNET Y-adapter  
(CCA-519-601,  
sold separately)  
Ferrite clamp  
(Included the  
DVD changer)  
5.1 ch Surround  
Decoder  
(Black)  
(DVH940)  
CeNET DVD Changer  
(VCZ625)  
CeNET Cable  
(included the Changer)  
(Gray)  
Set the [SLAVE/STAND ALONE]  
switch to the [SLAVE] position.  
STAND  
Set the [CeNET/STAND ALONE] switch  
to the [CeNET] position.  
SLAVE  
ALONE  
Digital optical fiber cable  
(DCA-005/008, sold separately)  
STAND  
CeNET  
ALONE  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD  
76  
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.  
Clarion Co., Ltd.  
All Rights Reserved.Copyright © 2006: Clarion Co., Ltd.  
Printed in Japan / Imprim au Japon / Impreso en Japón  
QC-6823B  
280-8358-00  
é
2006/1 (Y-YI)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Country Flame Indoor Fireplace Wood Fireplace User Manual
Craftsman Pressure Washer 58075231 User Manual
Creda Oven J052E User Manual
Cuisinart Toaster CPT 180 User Manual
Curtis Flat Panel Television LCDVD151 User Manual
Danby Laptop DAR440BL User Manual
Delta Electronics Power Supply MPL10X User Manual
Euro Pro Food Saver EP662 User Manual
Genica Power Supply GN 675VA User Manual
Gitzo Camcorder Accessories GT2941LLVL User Manual