Clarion CD Player XD516 User Manual

Owner’s manual  
Mode d’emploi  
11. ESPECIFICACIONES  
1. PRECAUTIONS  
1. When the inside of the car is very cold and  
the player is used soon after switching on  
the heater, moisture may form on the disc  
or the optical parts of the player and proper  
playback may not be possible. If moisture  
forms on the disc, wipe it off with a soft  
cloth. If moisture forms on the optical parts  
of the player, do not use the player for about  
one hour and the condensation will disap-  
pear naturally to allow normal operation.  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reason-  
able protection against harmful interference in  
a residential installation. This equipment gen-  
erates, uses, and can radiate radio frequency  
energy and, if not installed and used in accor-  
dance with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that interfer-  
ence will not occur in a particular installation. If  
this equipment does cause harmful interfer-  
ence to radio or television reception, which can  
be determined by turning the equipment off  
and on, the user is encouraged to consult the  
dealer or an experienced radio/TV technician  
for help.  
Sintonizador de FM  
Generales  
Manual de instrucciones  
Game de frecuencias: 87,9 MHz a 107,9 MHz  
Sensibilidad útil: 11 dBf  
Sensibilidad a 50 dB de silenciamiento: 17 dBf  
Selectividad de canal alternativo: 75 dB  
Separación estéreo (1 kHz): 35 dB  
Tensión de alimentación: 14,4 V CC (permisible  
de 10,8 V a 15,6 V), negativo a masa  
Consumo de corriente: Menos de 15 A  
Impedancia de los altavoces: 4 (permisible de  
4 a 8 )  
Respuesta en frecuencia (±3 dB): 30 Hz a 15 kHz  
Peso: 3,97 lb. (1,8 kg)  
Dimensiones:  
7(178 mm) de anchura × 2(50 mm) de  
altura × 6-1/8(155 mm) de fondo  
Contents  
Sintonizador de AM  
Respuesta en frecuencia: 530 kHz a 1.710 kHz  
Sensibilidad útil: 25 µV  
English  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the  
sound to skip.  
1. PRECAUTIONS...........................................................2  
2. CONTROLS.................................................................3  
3. BUTTON TERMINOLOGY..........................................4  
4. FEATURES..................................................................5  
5. HANDLING COMPACT DISCS...................................6  
6. DCP.............................................................................7  
7. REMOTE CONTROLL ................................................8  
8. OPERATION..............................................................10  
9. TROUBLESHOOTING ..............................................16  
10.ERROR DISPLAYS...................................................17  
11.SPECIFICATIONS.....................................................18  
7  
2”  
(50 mm)  
(178 mm)  
Reproductor de discos compactos  
3. This unit uses  
a
precision mechanism.  
Even in the event that trouble arises, never  
open the case, disassemble the unit, or  
lubricate the rotating parts.  
Sistema: Sistema de audio de discos compactos  
Discos utilizables: Discos compactos  
Respuesta en frecuencia: 10 Hz a 20 kHz (±1dB)  
Relación señal-ruido: 100 dB (1 kHz) IHF-A  
Gama dinámica: 95 dB (1 kHz)  
7-3/8”  
(188 mm)  
2-1/4”  
(58 mm)  
Distorsion armónica: 0,01%  
Table des matières  
Français  
CAUTION  
XD516  
Notas:  
Las especificaciones están de acuerdo con las nor-  
mas de la EIA.  
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE  
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.  
Audio  
Salida de potencia máxima:  
200 W (50 W × 4 ch)  
Salida de potencia media continua:  
18 W × 4, con 4 , 20 Hz a 20 kHz,1% de  
distorsión armónica total  
1. PRÉCAUTIONS.........................................................19  
2. COMMANDES.............................................................3  
3. NOMENCLATURE DES TOUCHES .........................20  
4. CARACTÉRISTIQUES..............................................21  
5. MANIPULATION DES DISQUES COMPACTS ........22  
6. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......23  
7. TÉLÉCOMMANDE....................................................24  
8. FONCTIONNEMENT.................................................26  
9. DÉPISTAGE DES PANNES......................................32  
10.AFFICHAGE DES ERREURS...................................33  
11.SPÉCIFICATIONS.....................................................34  
AM/FM CD PLAYER  
WITH CD CHANGER CONTROL  
Las especificaciones y el diseño están sujetos a cam-  
bio sin previo aviso por motivo de mejoras.  
RADIO AM/FM-LECTEUR CD  
AVEC PILOTAGE DE CHANGEUR CD  
RADIO AM/FM Y REPRODUCTOR CD  
CON CONTROL DE CAMBIADOR DE CD  
MODEL  
Acción de control de graves (30 Hz): ±13 dB  
Acción de control de agudos (10 kHz): ±10 dB  
Salida de línea (con CD, 1 kHz, 10 k): 1,8 V  
X5
12V  
GROUND  
AM 530-1710kHz/FM 87.9-107.9MHz  
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.  
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:  
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND  
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,  
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED  
OPERATION.  
Índice  
Español  
THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR  
1. PRECAUCIONES......................................................35  
2. CONTROLES..............................................................3  
3. NOMENCLATURA DE LOS BOTONES...................36  
4. CARACTERÍSTICAS ................................................37  
5. MANEJO DE LOS DISCOS COMPACTOS..............38  
6. PANEL DE CONTROL DESMONTABLE (DCP) ......39  
7. CONTROLADOR REMOTO......................................40  
8. OPERACIÓN.............................................................42  
9. SOLUCIÓN DE PROBLEMAS..................................48  
10.INDICACIONES DE ERROR ....................................49  
11.ESPECIFICACIONES ...............................................50  
SUBCHAPTER  
J
APPLICABLE AT DATE OF MANUFACTURE.  
CLARION CO.,LTD.  
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN  
Bottom View of Source Unit  
MANUFACTURED:  
286- 324-00  
Clarion Co.,Ltd.  
MADE IN CHINA  
SERIAL No.  
PE-2310B  
INFORMATION FOR USERS:  
CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL  
VIOLATE FCC APPROVAL.  
Clarion Co., Ltd.  
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Impreso en China  
Be sure to unfold and read the next page.  
Veuillez déployer et vous référer à la page suivante.  
Cerciórese de desplegar y de leer la página siguiente.  
PE-2386B  
280-7596-00  
2001/1 (D C)  
XD516  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. FEATURES  
Rotary Encoder Volume Control  
DIN Chassis with Detachable Control Panel  
Z-Enhancer with 3 Mode Sound Selector  
® FM Reception System  
AM/FM Bands-1 AM, 3 FM/18 FM/6 AM Touchbutton Memory  
8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters  
Zero-Bit Detector Mute Circuit  
Repeat/Random Play/Intro Music Scan  
Multi-Color LC Display  
4-Channel RCA Line Level Output with Fader Control  
200 W (50 W × 4) Maximum Power Output  
Infrared Remote Control  
Flip Down Panel  
This unit uses a flip-down structure that makes possible large-size displays.  
3. Do not use the FLIP DOWN PANEL as a tray  
CAUTION  
When opening and closing the FLIP DOWN PANEL,  
be careful not to catch your fingers. They could be  
injured.  
to place objects on when it is open.  
4. When closing the FLIP DOWN PANEL, do  
not press the Open button 1.  
5. Strong impacts to the operating or display  
section can cause damage or deformation.  
1. Always use this unit with the FLIP DOWN  
PANEL closed.  
6. If the flip down panel does not open fully,  
gently open it with your hand.  
2. Do not force operations or use this device  
abnormally when opening or closing the  
FLIP DOWN PANEL.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
5
5. HANDLING COMPACT DISCS  
This unit has been designed specifically for play-  
Note on Compact Discs  
Never stick labels on the surface of the compact  
disc or mark the surface with a pencil or pen.  
back of compact discs bearing the  
No other discs can be played.  
mark.  
To remove the compact disc from its storage  
case, press down on the center of the case and  
lift the disc out, holding it carefully by the edges.  
No  
Proper way to hold  
the compact disc  
Removing the disc  
Do not use any solvents such as commercially  
available cleaners, anti-static spray, or thinner to  
clean compact discs.  
Always handle the compact disc by the edges.  
Never touch the surface.  
No  
To remove fingermarks and dust, use a soft  
cloth, and wipe in a straight line from the center  
of the compact disc to the circumference.  
No  
Do not use compact discs that have large  
scratches, are misshapen, or cracked, etc. Use  
of such discs will cause misoperation or damage.  
No  
New discs may have some roughness around  
the edges. The unit may not work or the sound  
may skip if such discs are used. Use a ball-point  
pen, etc. to remove roughness from the edge of  
the disc.  
Ball-point pen  
Roughness  
Do not expose compact discs to direct sunlight  
or any heat source.  
No  
Note:  
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These  
may get caught in the internal mechanism and damage the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
XD516  
6. DCP  
The control panel can be detached to prevent theft. When detaching the control panel, store it in the  
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.  
We recommend taking the DCP with you when leaving the car.  
Removing the DCP  
Attaching the DCP  
1. Hold down POWER button 3 for 1 second or  
1. Insert the right side of the DCP into the main  
unit.  
longer to switch off the power.  
2. Insert the left side of the DCP into the main  
unit.  
2.  
DCP  
2. Deeply push in Open button 1 to unlock the  
1.  
FLIP DOWN PANEL.  
If the FLIP DOWN PANEL does not open fully,  
gently open it with your hand.  
DCP Release button 1  
CAUTION  
• The DCP can easily be damaged by shocks. After  
removing it, be careful not to drop it or subject it  
to strong shocks.  
• If the FLIP DOWN PANEL is kept open, the DCP  
may drop due to vibration of the car.  
This results in damage to the DCP. So close the  
FLIP DOWN PANEL or remove the DCP to store  
into the case.  
• The connector connecting the unit and the DCP is  
an extremely important part. Be careful not to  
damage it by pressing on it with fingernails,  
screwdrivers, etc.  
3. Pull the DCP toward you and remove it.  
DCP  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
4. Close the HOLD FLAP.  
HOLD FLAP  
CAUTION  
Be sure to close the HOLD FLAP for safety  
when removing the DCP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
7
7. REMOTE CONTROL  
Receiver for remote control unit  
Operating range: 30° in all directions  
Remote Control Unit  
Signal transmitter  
&
(
¡
)
*
£
¢
§
Inserting the Batteries  
1. Turn the remote control unit over, then slide  
the rear cover in the direction of the arrow.  
AA (SUM-3, IECR-6/1.5V)  
Batteries  
2. Insert the AA (SUM-3, IECR-6/1.5V) batter-  
ies that came with the remote control unit fac-  
ing in the directions shown in the figure, then  
close the rear cover.  
Notes:  
Using batteries improperly can cause them to explode.  
Take note of the following points:  
Rear cover  
When replacing batteries, replace both batteries with  
new ones.  
Rear side  
Do not short-circuit, disassemble or heat batteries.  
Do not dispose of batteries into fire or flames.  
Dispose of spent batteries properly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
XD516  
Functions of Remote Control Unit Buttons  
Mode  
Radio  
CD  
CD changer  
Button  
& FUNC  
Turns power on and off. When pressed and held for 1 second: Turns power off.  
Switches between radio, CD and CD changer.  
* BAND  
Switches reception band.  
Plays the first track.  
Top play.  
Moves the next disc in  
increasing order.  
DISC UP  
PROG  
TOP  
( VOLUME  
) SEARCH  
Increases and decreases volume (in all modes).  
Moves preset channels up Moves tracks up and  
Moves tracks up and  
down.  
and down.  
down.  
When pressed and held for When pressed and held for  
1 second:  
Fast-forward/  
fast-backward.  
1 second:  
Fast-forward/  
fast-backward.  
¡ PLAY/PAUSE Turns mute on and off.  
Switches between  
playback and pause.  
Switches between  
playback and pause.  
MUTE  
£ ISR  
Turns mute on and off.  
Switches between  
playback and pause.  
Switches between  
playback and pause.  
Recalls ISR radio station in memory.  
Press and hold for more than 2 seconds: Stores current station into ISR memory  
(radio mode only).  
¢ DISP  
Switches among main display, sub display and clock display.  
SCAN  
Preset scan.  
When pressed and held for  
2 seconds: Auto store.  
Scan play.  
Scan play.  
When pressed and held for  
1 second: Disc scan play.  
PS/AS  
§ RPT  
No function.  
Repeat play.  
Repeat play.  
When pressed and held for  
1 second: Disc repeat play.  
BLS  
RDM  
No function.  
Random play.  
Random play.  
MONI  
When pressed and held for  
1 second: Disc random  
play.  
* Some of the corresponding buttons on the source unit and remote control unit have different functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
9
8. OPERATION  
Note:  
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).  
Adjusting the Treble  
Basic Operations  
1) Press A-M button 2 and select “TREB”.  
CAUTION  
2) Turning the Rotary knob # clockwise empha-  
sizes the treble; turning it counterclockwise  
attenuates the treble.  
When this unit is turned on, starting and stop-  
ping the engine of a car with its volume raised  
to the maximum level may harm your hearing.  
Be careful about adjusting the volume.  
The factory default setting is “0”. (Adjustment  
range: –6 to +6)  
*
3) When the adjustment is complete, press A-M  
button 2 several times until the function  
mode is reached.  
Turning ON the Power and Adjusting  
the Volume  
1) Press the POWER button 3.  
To turn off the power, press the POWER button  
3 for 1 second or longer.  
*
Adjusting the Balance  
1) Press A-M button 2 and select “BAL”.  
2) Press the FNC button 3 and select another  
operation mode. Every time the FNC button  
3 is pressed, the display changes the oper-  
ation mode as:  
2) Turning the Rotary knob # clockwise empha-  
sizes the sound from the right speaker; turn-  
ing it counterclockwise emphasizes the sound  
from the left speaker.  
Radio CD CD changer Radio  
The factory default setting is “0”. (Adjustment  
range: L9 to R9)  
*
Notes:  
The operation mode not connected to the unit will not  
be selected.  
3) When the adjustment is complete, press A-M  
button 2 several times until the function  
mode is reached.  
If the CD mode is selected when no disc is inserted,  
the display shows “ NO DISC”.  
3) Turning the Rotary knob  
#
clockwise  
Adjusting the Fader  
increases the volume; turning it counterclock-  
wise decreases the volume.  
1) Press A-M button 2 and select “FAD”.  
The volume level is from 0 (minimum) to 33 (max-  
imum).  
*
2) Turning the Rotary knob # clockwise empha-  
sizes the sound from the front speakers; turn-  
ing it counterclockwise emphasizes the sound  
from the rear speakers.  
Audio Mode Adjustments  
The factory default setting is “0”. (Adjustment  
range: F9 to R9)  
Press the A-M button 2 to select the adjustment  
mode. The mode switches as follows each time  
the A-M button is pressed:  
BASS TREB BAL FAD Previous  
mode  
*
3) When the adjustment is complete, press A-M  
button 2 several times until the function  
mode is reached.  
Setting the Z-enhancer  
Adjusting the Bass  
This unit comes with three types of sound tone  
effects stored in memory. Select the one you prefer.  
1) Press A-M button 2 and select “BASS”.  
2) Turning the Rotary knob # clockwise empha-  
sizes the bass; turning it counterclockwise  
attenuates the bass.  
The factory default setting is “Z-EHCR OFF”.  
*
Each time you press Z-EHCR button 0, the  
tone effect changes in the following order.  
“Z-ENHANCER 1” “Z-ENHANCER 2” ➜  
“Z-ENHANCER 3” “Z-EHCR OFF” ➜  
“Z-ENHANCER 1”...  
The factory default setting is “0”. (Adjustment  
range: –6 to +6)  
*
3) When the adjustment is complete, press A-M  
button 2 several times until the function  
mode is reached.  
• Z-ENHANCER 1: bass emphasized  
• Z-ENHANCER 2: treble emphasized  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
XD516  
• Z-ENHANCER 3: bass and treble emphasized  
• Z-EHCR OFF: no sound effect  
Radio Mode Operations  
FM Reception  
For enhanced FM performance the  
Loudness Effect  
®
In order to turn on/off the loudness effect, use  
the LD button 2 for 1 second or longer. Every  
time the LD button 2 is pressed and held for 1  
second or longer, the loudness effect switches  
on and off.  
tuner includes signal actuated stereo control and  
Multipath noise reduction circuits.  
Listening to the Radio  
1) Press the FNC button 3 to select the radio  
When the loudness effect is on, the display will show  
LD”.  
*
mode, then the radio will be on.  
2) To select a preset band, press the BND but-  
ton !, then select one of the preset bands  
such as FM1, FM2, FM3, or AM. Every time  
the BND button ! is pressed, the display will  
change as:  
Switching the Display  
Every time the DISP button 5 is pressed, the  
display will change between the main display  
and the clock display.  
FM1 FM2 FM3 AM FM1  
Main display  
3) Press the SRCH Left/Right button @, then  
the station at which there is a broadcast will  
be selected (Seek selection).  
Mute  
Clock display  
Use this function to turn off the sound immedi-  
ately.  
Press the MUTE button $. The sound turns off  
and “MUTE” appears on the display. Press the  
MUTE button again to cancel the mute mode.  
Main display ...  
Manual Tuning  
1) Press the BND button !, then select FM1,  
Setting the Clock  
FM2, FM3 or AM.  
1) Press the DISP button 5 to display the clock  
2) Press and hold the BND button ! for 2 sec-  
onds or longer, then the display will show  
MANU”, which means that a manual selec-  
tion function is on.  
display.  
2) Press and hold the DISP button 5 for 1 sec-  
ond or longer.  
3) Press the SRCH Left button @, then set the  
3) Press the SRCH Left/Right button @ and  
current hour.  
select the right station.  
4) Press the SRCH Right button @, then set the  
current minute.  
Seek Tuning  
5) Press the DISP button 5, then the clock is  
1) Press the BND button !, then select FM1,  
set.  
FM2, FM3 or AM.  
Notes:  
2) If the “MANU” on the display is on, press and  
hold the BND button ! for 1 second or  
longer. When the “MANU” display is off, the  
Seek Selection function is on.  
If you select another operation mode while you are  
setting the clock, the clock setting operation will be  
canceled.  
If you remove the vehicle’s battery for a check or  
repair, the clock will be reset, so you must set it again.  
3) Press the SRCH Left/Right button @, then  
when it selects the station in which there is a  
broadcast, it automatically stops.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
11  
3) Press and hold the ISR button 4 for 2 sec-  
Preset Memory Function  
onds or longer.  
Preset Memory Function can store up to 24 sta-  
tions: six stations for each of FM1, FM2, FM3  
and AM.  
Recalling ISR  
Press the ISR button 4 then the display will  
show “ISR”, then the radio station previously  
memorized will be selected. Press the ISR but-  
ton 4 again to disengage the unit from the  
Recalling ISR function.  
Note:  
When the present memory function is used, all the  
content of the memory will be erased.  
Manual memory function  
1) Press the BND button !, and select the  
Area Change  
Use this function when you are using the car  
stereo anywhere outside the U.S.  
band you want to store in the memory.  
2) Press the SRCH Left/Right button @ then  
select the station you want to store in the  
memory.  
Switchable frequency spacing  
This car stereo is initially set to tune in frequen-  
cy intervals of 10 kHz for AM and 200 kHz for  
FM, the standard calibrations in the U.S. When  
using the unit outside the U.S., use the following  
procedure to switch the frequency range.  
The table below lists the frequency specifica-  
tions for the U.S. and other countries.  
3) Press and hold the Preset button 9 for 2  
seconds or longer, then the station will be  
stored in the memory.  
Auto store function (Automatic Station Store)  
1) Press the BND button !, then select the  
band you want to store in the memory.  
Initial Setting New Setting  
(U.S. standard) (outside U.S.)  
2) Press and hold the AS button 8 for 2 sec-  
onds or longer, then the station at which the  
reception is the strongest will be automatical-  
ly stored in the memory.  
Frequency  
spacing  
10 kHz  
530 to  
9 kHz  
531 to  
AM  
FM  
Note:  
Frequency  
range  
When the number of stations stored is less than six,  
the previous content of the memory for each direct  
button will be retained.  
1,710 kHz 1,629 kHz  
Frequency  
spacing  
200 kHz  
87.9 to  
50 kHz  
87.5 to  
Preset Scanning (Preset Station Scan)  
Frequency  
range  
When the PS button 8 is pressed, the preset  
memory numbers flash and the stations are  
tuned in for 7 seconds each in the order in which  
they were stored. Press the PS button again to  
cancel the preset scanning mode.  
107.9 MHz 108 MHz  
Switching the area change  
Outside U.S. (New Setting)  
While pressing the BND button !, press the  
SRCH Left button @, then “outside U.S.will be  
selected.  
Instant Station Recall (ISR)  
Inside U.S. standard (Initial Setting)  
With this function, a specific radio station can be  
recalled from any mode.  
While pressing the BND button !, press the  
SRCH Right button @, then the “U.S. standard”  
will be selected.  
ISR memory  
1) Press the FNC button 3, then select the  
radio mode.  
2) Select the radio station which you want to  
store in the memory.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
XD516  
Ejecting the CD  
CD Mode Operations  
1. Press Open button 1 to open the FLIP  
DOWN PANEL.  
Loading a Disc  
2. Press Eject button % to eject the CD. Take it  
1. Press Open button 1 to access the CD  
out from the ejected position.  
insertion slot behind the FLIP DOWN.  
3. Close the FLIP DOWN PANEL.  
2. Insert the disc into the CD insertion slot with  
its label side up, then the CD will start play-  
ing.  
CAUTION  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
Notes:  
For 5-inch (12 cm) CD For 3-inch (8 cm) single CD  
• If the FLIP DOWN PANEL does not open fully, gently  
open with your hand.  
• After taking out the CD, be sure to close the FLIP  
DOWN PANEL.  
If a CD (12 cm) is left in the ejected position for 15  
seconds, the CD is automatically reloaded (Auto  
reload).  
When inserting a single CD (3(8 cm)), insert it from  
the center of the slot.  
*
8 cm CDs are not auto reloaded. Be sure to remove  
it when ejected.  
When inserting a single CD (3(8 cm)), do not con-  
nect an adapter.  
*
Note:  
• If you force a CD into before auto reloading, this can  
damage the CD.  
Notes:  
Some CDs recorded in CD-R mode may not be  
usable.  
Top Function  
Press the TOP button !, then the CD will start  
Even when recorded in CD-R/W mode, some CDs  
may not be usable.  
3. Close the FLIP DOWN PANEL.  
playing from the first song (track number 1).  
CAUTION  
Selecting Tracks (songs)  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
Note:  
• If the FLIP DOWN PANE, does not open fully, gently  
open with your hand.  
Press the SRCH Left/Right button @.  
: Playback will start from the next track.  
: Playback will start from the beginning of  
the track currently playing. When this  
button is pressed again, the CD will play  
from the previous track.  
• After loading a CD, always close the FLIP DOWN  
PANEL.  
Fast-Forward and Fast-Backward  
Listening to the Disc already Inserted  
Press and hold the SRCH Left/Right button @.  
Press the FNC button 3 to select the CD mode,  
the CD will start playing.  
: To fast-forward  
: To fast-backward  
Pressing the SRCH Left/Right button for 1 second or  
*
Stopping (pausing) Playback  
Press the Play/Pause button $. “PAUS”  
appears on the display.  
longer will move forward or backward 5 times faster  
than normal play, and pressing it for 3 seconds or  
longer will do the operation 30 times faster.  
Press the Play/Pause button $ again to resume  
playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
13  
Scan Play (Intro Music Scan)  
CD Changer Mode Operations  
Press the SCN button 8, then the display  
shows “SCN”, then the CD will play the first 10  
seconds of each track of the whole disc. Press  
the SCN button 8 again to disengage the unit  
from scan play.  
Listening to the Disc  
Press the FNC button 3 and select the CD  
changer mode, then the CD starts playing.  
A scan play will start from the track following the one  
currently playing.  
*
Repeat Play  
If “NO MAGA” appears on the display, insert the mag-  
*
Press the RPT button 7, then the display shows  
RPT”, then the track currently playing will be  
played repeatedly. Press the RPT button 7  
again to disengage the unit from repeat play.  
azine into the CD changer. Then, while the player  
checks the magazine “LOADING” appears on the dis-  
play.  
If “NO DISC” appears on the display, eject the maga-  
zine and insert discs into each slot. Then, reinsert the  
magazine back into the CD changer.  
*
Random Play  
Press the RDM button 6, then the display will  
show “RDM”, then the entire tracks on the disc  
will be played at random. Press the RDM button  
6 again to disengage the unit from random play.  
Stopping (pausing) Playback  
Press the Play/Pause button $. “PAUS”  
appears on the display.  
Press the Play/Pause button $ again to resume  
playback.  
Selection of CDs  
Press the Direct button (1 to 6) 9 then select  
the CD you wish to play.  
If there is no CD in a slot of magazine, it is invalid to  
press the Direct button 9 corresponding to its disc  
*
number.  
Selecting Tracks (songs)  
Press the SRCH Left/Right button @.  
: Playback will start from the next track.  
: Playback will start from the beginning of  
the track currently playing. When this  
button is pressed again, the CD will play  
from the previous track.  
Fast-Forward and Fast-Backward  
Press and hold the SRCH Left/Right button @.  
: To fast-forward  
: To fast-backward  
Pressing the SRCH Left/Right button for 1 second or  
*
longer will move forward or backward 5 times faster  
than normal play, and pressing it for 3 seconds or  
longer will do the operation 30 times faster.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
XD516  
Scan Play (Intro Music Scan)  
Switching Magazine  
Press the SCN button 8, then the display  
shows “SCN”, then the CD will play the first 10  
seconds of all the tracks of all CDs. Press the  
SCN button 8 again to disengage the unit from  
scan play.  
This function can be used only when the con-  
nected CD changer can store a multiple number  
of magazines.  
Every time the MAG button ! is pressed, the  
next magazine will be selected.  
A scan play will start from the track following the one  
currently playing.  
*
Disc scan play  
Press and hold the SCN button 8 for 1 second  
or longer, then the display will show “  
” and  
SCN”, and plays the first 10 seconds of the first  
song of all the CDs in the CD changer.  
Press the SCN button 8 again to disengage the  
unit from disc play.  
A scan play will start from the first tracks of next CDs  
following the one currently playing.  
*
Repeat Play  
Press the RPT button 7, then the display shows  
RPT”, then the track currently playing will be  
played repeatedly. Press the RPT button 7  
again to disengage the unit from repeat play.  
Disc repeat play  
Press and hold the RPT button 7 for 1 second  
or longer, then the display shows both the  
” and “RPT”, then the disc currently being  
played will be played repeatedly.  
Press the RPT button 7 again to disengage the  
unit from disc repeat play.  
Random Play  
Press the RDM button 6, then the display will  
show “RDM”, then the entire tracks on the disc  
will be played at random.  
Press the RDM button 6 again to disengage the  
unit from disc random play.  
Disc random playback  
Press and hold the RDM button 6 for 1 second  
or longer, then the display will show both the  
” and “RDM”, then the entire tracks of all  
the discs in the CD changer will be played at ran-  
dom.  
Press the RDM button 6 again to disengage the  
unit from disc play.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
15  
9. TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not  
turn on.  
Fuse is blown.  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
(No sound is  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
No sound output Power antenna lead is  
1. Turn the unit off.  
when operating  
the unit with  
amplifiers or  
power antenna  
attached.  
shorted to ground or  
2. Remove all wires attached to the power antenna  
lead. Check each wire for a possible short to  
ground using an ohm meter.  
excessive current is required  
for remote-on the amplifiers  
or power antenna.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the amplifiers  
turn off before all wires are attached, use an  
external relay to provide remote-on voltage  
(excessive current required).  
Nothing happens The microprocessor has  
Turn off the power, then press the Open button 1  
when buttons are malfunctioned due to noise, and remove the DCP.  
pressed.  
etc.  
Press the reset button for about 2 seconds with a  
thin rod.  
Display is not  
accurate.  
Reset button  
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with  
are dirty.  
cleaning alcohol.  
Compact disc  
cannot be  
loaded.  
Another compact disc is  
already loaded.  
Eject the compact disc before loading the new one.  
Sound skips or is Compact disc is dirty.  
noisy.  
Clean the compact disc with a soft cloth.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad  
directly after  
power is turned  
on.  
Water droplets may form on Let dry for about 1 hour with the power on.  
the internal lens when the  
car is parked in a humid  
place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
XD516  
10. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
CD ER2  
Cause  
Measure  
A CD is caught inside the CD deck This is a failure of CD deck’s  
and is not ejected.  
mechanism and consult your store  
of purchase.  
CD ER3  
A CD cannot be played due to  
scratches, etc.  
Replace with a non-scratched,  
non-warped disc.  
CD ER6  
A CD is loaded upside-down inside Eject the disc then reload it  
the CD deck and does not play. properly.  
CDCH ER2  
CDCH ER3  
CDCH ER6  
A CD inside the CD changer is not This is a failure of CD changer’s  
loaded.  
mechanism and consult your store of  
purchase.  
A CD inside the CD changer  
Replace with a non-scratched,  
cannot be played due to scratches, non-warped disc.  
etc.  
A CD inside the CD changer  
cannot be played because it is  
loaded upside-down.  
Eject the disc then reload it  
properly.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD516  
17  
11. SPECIFICATIONS  
FM Tuner  
General  
Frequency Range: 87.9 MHz to 107.9 MHz  
Usable Sensitivity: 11 dBf  
Power Supply Voltage: 14.4 V DC (10.8 V to 15.6  
V allowable), negative ground  
50 dB Quieting Sensitivity: 17 dBf  
Alternate Channel Selectivity: 75 dB  
Stereo Separation (1 kHz): 35 dB  
Frequency Response (±3 dB): 30 Hz to 15 kHz  
Current Consumption: Less than 15 A  
Speaker Impedance: 4 (4 to 8 allowable)  
Weight: 3.97 lb. (1.8 kg)  
Dimensions:  
7(178 mm) Width × 2(50 mm) Height ×  
6-1/8(155 mm) Depth  
AM Tuner  
7  
(178 mm)  
2”  
(50 mm)  
Frequency Range: 530 kHz to 1,710 kHz  
Usable Sensitivity: 25 µV  
CD Player  
System: Compact disc audio system  
Usable Discs: Compact disc  
Frequency Response: 10 Hz to 20 kHz (±1 dB)  
Signal-to-Noise Ratio: 100 dB (1 kHz) IHF-A  
Dynamic Range: 95 dB (1 kHz)  
7-3/8”  
(188 mm)  
2-1/4”  
(58 mm)  
Harmonic Distortion: 0.01%  
Notes:  
Specifications comply with EIA Standards.  
Specifications and design are subject to change with-  
out notice for further improvement.  
Audio  
Maximum Power Output:  
200 W (50 W × 4 ch)  
Continuous Average Power Output:  
18 W × 4, into 4 , 20 Hz to 20 kHz,1%THD  
Bass Control Action (30 Hz): ±13 dB  
Treble Control Action (10 kHz): ±10 dB  
Line Output (with CD 1 kHz, 10 k): 1.8 V  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
XD516  

Cornelius Refrigerator 000 PLUS User Manual
Craftsman Blower 3607969 User Manual
Craftsman Cordless Drill 97311424 User Manual
Creative MP3 Player FX200 User Manual
Crown Equipment Home Gym Series WB User Manual
Curtis Clock Radio RCD633 User Manual
Curtis Portable DVD Player DVD1047B User Manual
Edelbrock Automobile 3881 User Manual
Electro Voice Stereo Amplifier E V 44 User Manual
Gitzo Camcorder Accessories GT2942 User Manual