Clarion CD Player DXZ935 User Manual

Owner’s manual

Mode d’emploi

Manual de instrucciones

HIGHEND AM/FM RADIO CD PLAYER COMBINATION

•

COMBINE CD RADIO FM/AM HAUT DE GAMME

•

COMBINACIÓN DE RADIO DE AM/FM Y REPRODUCTOR

DE DISCOS COMPACTOS DE ALTA POTENCIA

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Impreso en China

PE-2577B

280-7875-00

2002/08 (A·C)

Download from Www.Somanuals.com. All Manuals Search And Download.

Dual Action

2. PRECAUTIONS

ꢀ When the Sirius Satelite Radio

What is Sirius Satellite Radio?

This unit uses Dual Action to make large-screen

displays possible.

2. Before the DUAL ACTION closes, there may

be a braking sound from the safety mecha-

nism. This is normal.

1. When the inside of the car is very cold and the

player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper playback

may not be possible. If moisture forms on the

disc, wipe it off with a soft cloth. If moisture

forms on the optical parts of the player, do not

use the player for about one hour. The conden-

sation will disappear naturally allowing normal

operation.

Sirius is radio the way it was meant to be: Up to

100 new channels of digital quality programming

delivered to listeners coast to coast via satellite.

That means 50 channels of completely commer-

cial-free music. Plus up to 50 more channels of

news, sports, and entertainment from names

like CNBC, Discovery, SCI-FI Channel, A&E,

House of Blues, E!, NPR, Speedvision and

ESPN.

severe vibration may cause the sound to skip.

is connected

When you use the Dual Action, be sure to close

it.

3. When the auto antenna cord is connected to

the car auto antenna cord, when the unit is

switched to the radio mode (or the TV mode),

the antenna is extended automatically. If the car

is in a narrow space, the antenna may strike

something, so be careful.

∗ For details, refer to the Owner’s Manual

3. If you move the DUAL ACTION by hand, this

may create play. To correct this play, with the

power on for the unit, press the [O] button to

close the DUAL ACTION.

provided with the Sirius Satelite Radio.

CAUTION

[FNC] button

• Press the buton to switches the operation

mode among the SIRIUS mode, etc.

BE CAREFUL NOT TO GET YOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE DUAL ACTION.

4. After a disc is ejected, the DUAL ACTION au-

tomatically returns to the tilted or closed

state. If there is any obstruction when the

DUAL ACTION tries to close, the safety

mechanism is triggered and the DUAL AC-

TION returns to the open state. If this hap-

pens, remove the obstruction, then press the

[O] button.

4. This unit uses a precision mechanism. Even in

the event that trouble arises, never open the

case, disassemble the unit, or lubricate the ro-

tating parts.

[SC] button

• Press the button to preform category scan

while in the SIRIUS mode.

1. For safety’s sake, always close the DUALAC-

TION before leaving this unit unused for a

prolonged period or switching OFF the igni-

tion key.

Sirius is live, dynamic entertainment, completely

focused on listeners. Every minute of every day

of every week will be different. All 50 commer-

cial-free music channels are created in-house

and hosted by DJs who know and love the mu-

sic. Do you like Reggae? How about Classic

Rock or New Rock? Sirius has an array of

choices spanning a vast range of musical tastes

including the hits of the 50’s, 60’s, 70’s, & 80’s

as well as Jazz, Country, Blues, Pop, Rap, R&B,

Bluegrass, Alternative, Classical, Heavy Metal,

Dance and many others...

2. Driving on extremely bumpy roads which cause

• Press and hold the button to perform preset

scan while in the SIRIUS mode.

If you switch OFF the ignition key with the

DUAL ACTION tilted, the DUAL ACTION

does not close.

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules.

CAUTION

[DIRECT] button

• Stores a station into memory or recall it di-

rectly while in the SIRIUS mode.

5. To avoid scratching the compact disc, keep

the 12 or 8 cm CD level when inserting or re-

moving them.

USE OF CONTROLS, ADJUSTMENTS, OR PER-

FORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN, MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation.

[a], [d] buttons

Handling Compact Discs

• Press the buton to selects a station.

THE COMPACT DISC PLAYER and MINI DISC

PLAYER SHOULD NOT BE ADJUSTED OR RE-

PAIRED BY ANYONE EXCEPT PROPERLY

QUALIFIED SERVICE PERSONNEL.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio communica-

tions. However, there is no guarantee that inter-

ference will not occur in a particular installation.

CD player or it may damage the CD player.

[SAT] button

• Press the buton to switches the SIRIUS

mode.

Use only compact discs bearing the

•

Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use of

such discs may cause misoperation or damage.

mark.

From its state-of-the-art, digital broadcasting fa-

cility in Rockefeller Center, New York City, Sirius

will deliver the broadest, deepest mix of radio

entertainment from coast to coast.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

CHANGES OR MODIFICATIONS NOT EX-

PRESSLY APPROVED BY THE MANUFAC-

TURER FOR COMPLIANCE COULD VOID THE

USER’S AUTHORITY TO OPERATE THE EQUIP-

MENT.

To remove a compact disc from its storage case,

press down on the center of the case and lift the

disc out, holding it carefully by the edges.

Some CDs recorded in CD-R/CD-RW mode may

not be usable.

If this equipment does cause harmful interference

to radio or television reception, which can be de-

termined by turning the equipment off and on, the

user is encouraged to consult the dealer or an ex-

perienced radio/TV technician for help.

Sirius will bring you music and entertainment

programming that is simply not available on tra-

ditional radio in any market across the country.

It’s radio like you’ve never heard before.

• Do not use commercially available CD protec-

tion sheets or discs equipped with stabilizers,

etc. These may damage the disc or cause

breakdown of the internal mechanism.

Handling

•

Compared to ordinary music CDs, CD-R and CD-

RW discs are both easily affected by high tem-

perature and humidity and some of CD-R and

CD-RW discs may not be played. Therefore, do

not leave them for a long time in the car.

INFORMATION FOR USERS:.

So Get Sirius and Listen Up! For more informa-

tion, visit siriusradio.com.

CHANGES OR MODIFICATIONS TO THIS PROD-

UCT NOT APPROVED BY THE MANUFAC-

TURER WILL VOID THE WARRANTY AND WILL

VIOLATE FCC APPROVAL.

Storage

• Do not expose compact discs to direct sunlight

or any heat source.

• New discs may have some roughness around

the edges. If such

• Do not expose compact discs to excess hu-

midity or dust.

Ball-point pen

discs are used, the

player may not work

or the sound may

• Do not expose compact discs to direct heat

from heaters.

Roughness

skip. Use a ball-point

pen or the like to re-

move any roughness

from the edge of the

disc.

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the center

of the compact disc to the circumference.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray, or thinner

to clean compact discs.

•

Never stick labels on the surface of the compact

disc or mark the surface with a pencil or pen.

• Never play a compact disc with any cellophane

tape or other glue on it or with peeling off

marks. If you try to play such a compact disc,

you may not be able to get it back out of the

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

Bottom View of Source Unit

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Major button operations when external equipment is

connected to this unit

3. CONTROLS/LES COMMANDES/CONTROLES

4. NOMENCLATURE

Note:

[RP] button

ꢀWhen the CD/MD/DVD changer

Source unit / Appareil pilote / Unidad fuente

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).

•

Press the button to turn on or off the AF (Alter-

native Frequency) function in the DAB mode.

(This function is only DAB tuner.)

is connected

Names of the Buttons and their Functions

∗ For details, see the section “CD/MD/DVD

changer operations”. For the DVD

changer, refer to the Owner’s Manual pro-

vided with the DVD changer.

[RD] button

[RELEASE] button

• Deeply press the button to remove the DCP.

[RP] button

• Plays repeatedly while in the CD mode.

[

]

[

]

FNC

VSE

•

Use the button to set the PTY (Programme Type)

standby mode or PTY items in the DAB mode.

[SC] button

[

]

RELEASE

[

]

[

]

SAT

[VSE] button

[SC] button

• Switches the TV picture mode or VTR (external)

picture mode.

• Performs scan play for 10 seconds for each

track. Disc scan play is performed when the

button is pressed and held.

• Press to enter VSE mode or the Position

• Performs preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed.

mode.

[DIRECT] button

•

When the button is pressed and hold for 1 sec-

ond or longer, the mode is turned on or off.

[ ]

[RP] button

•

Stores a station into memory or recall it directly.

• Performs scan play for 10 seconds for each

•

Performs repeat play. When this button is

[a], [d] buttons

• Selects a station.

[

]

track while in the CD mode.

DISP

pressed and held, disc repeat play is performed.

[EQ] button

• Press to enter the EQ mode.

]

[BND] button

A-M

[RD] button

[BND] button

• Switches the band, or seek tuning or manual

tuning while in the radio mode.

•

When the button is pressed and hold for 1 sec-

ond or longer, the mode is turned on or off.

• Performs random play. Also performs disc ran-

dom play when the button is pressed and

held.

• Switches the band.

[

]

• When the button is pressed and held,

switches seek tuning or manual mode.

• Plays a first track while in the CD mode.

[FNC] button

[DIRECT] button

• Designates the disc to be played.

[TITLE] button

• Use the button to input a title in the CD mode

and radio mode.

• Press the button to turn on the power.

Press and hold the button for 1second or

longer to turn off the power.

[

]

[

]

ISR

[

]

[

]

DIRECT

PLII

ꢀWhen the DTS/DOLBY DIGITAL

[

]

[

]

[

]

ROTARY

TITLE

BND

[DISP] button

is connected

[VSE] button

• Switches the operation mode among the ra-

• Press and hold the button for 1 second or

• Switches the clock or selects the title mode.

dio mode, etc.

longer to enter the adjust mode.

• When the button is pressed and held, the user

titles or disc titles are switched.

• Press the button to turn on the DSF.

[SAT] button

[a], [d] buttons

• After DSF is selected, press and hold the

[VSE] button for 1 second or longer to turn to

off DSF effect.

• This button is available only when the unit is

connected with Satellite Digital Radio Tuner

(sold separately DSH920S).

• Selects a station while in the radio mode or

selects a track when listening to a CD. These

buttons are used to make various settings.

[TITLE] button

• Use the button to input a title in the CD

changer mode.

With the Dual Action opened / Lorsque la Double action est ouverte

Con el panel frontal de acción doble abierto

[PLII] button

•

Use the button to scroll the title during CD-text

play or MD changer play in the CD changer mode.

[ROTARY] knob

• Adjust the volume by turning the knob clock-

wise or counterclockwise.

[

] button

• Press the button to turn on the PLII, and each

time to press PLII mode changes following or-

der:

[

]

[

CD EJECT

]

RESET

[

]

CD SLOT

• Plays or pauses a CD while in the CD mode.

[

] button

• Used as “Enter button” while the unit is in the

• Plays or pauses a CD, MD or DVD.

• Use the knob to perform various settings.

ADJ mode.

Music mode ➜ Matrix mode ➜ Movie mode

➜ Virtual mode ➜ mode off

[a], [d] buttons

[PLII] button

• Press to select the Dolby Pro Logic II mode.

[O] button

• Use the button to open the dual action.

•

Selects a track when listening to a disc.

[BND] button

• Plays a first track.

[DIRECT] button

• Stores a station into memory or recall it di-

rectly while in the radio mode.

[DISP] button

• Switches the display indication (Main display,

clock display).

• Used as “disc up button” while the unit is in

the DVD changer mode.

[CD SLOT]

[A-M] button

ꢀWhen the TV/DAB is connected

• CD insertion slot.

• Use the button to switch to the audio mode

(balance/fader/sub.w/center SP/NF. adjust-

ment)

∗ For details, see the section “TV opera-

tions” or “DAB operations”.

[CD EJECT] button

• Press to eject a CD loaded in the unit.

[SC] button

[RD] button

• Performs random play while in the CD mode.

• Press to open the CD slot and insert a CD.

• Used to perform preset or category scan

while the unit is in the radio mode. When the

button is pressed and held, auto store is

performed.(This function is available only in

the TV tuner mode.)

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

[RESET] button

• Press to reset the system.

[ISR] button

• Recalls ISR radio station in memory.

• Press and hold for 2 seconds or longer:

Stores current station into ISR memory (radio

DXZ935

6^{mode only).}

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Items

: DAB indication

: Alternative frequency indication

: Traffic announcement indication

: Traffic programme indication

: Programme type indication

: Information indication

: Mute indication

Operation status indication

Titles, Clock, etc. are displays.

: Satellite indication

: Stereo indication

: Manual indication

:Disc indication

Function mode indication

The names of modes being

selected,etc.are displayed.

:Scan indication

:Repeat indication

:Random indication

Preset channel indication (1 to 6)

Disc number indication (1 to 12)

: Music mode indication

: Matrix mode indication

: Movie mode indication (indicate within B.B. DTS/DOLBY DIGITAL)

: Virtual mode indication (indicate within B.B. DTS/DOLBY DIGITAL)

: VSE indication (VSE: Virtual Space Enhancer)

: Parametric Equalizer indication

: Dolby Pro Logic II indication

: DTS indication (indicate within B.B. DTS/DOLBY DIGITAL)

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

5. REMOTE CONTROL

Names of Parts

Joystick

wz Volume control

ad Search

BND (Band) button

FNC (function)/

POWER (power) button

Top button

Disc Up button

Program button

BND

Functions of Remote Control Unit Buttons

Mode

Button

Radio

(DAB) (SIRIUS)

CD/MD changer

DVD changer

Switches among radio, DAB, SIRIUS, CD, DVD deck, CD/MD changer, DVD changer, TV,

and AUX.

[FUNC]

Plays the first track.

Top play.

Moves the next disc

in increasing order.

Switches reception

band.

Switches reception

band.

[BAND]

Increases and decreases volume (in all modes).

[

] , [

]

Moves preset

channels up and

down.

Moves tracks up and down.

When pressed and held for 1 second:

Fast-forward/fast-backward.

Moves preset

channels up and

down.

∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.

Loading Battery

1. Open the battery cover.

Battery cover

2. Insert the supplied lithium battery (CR2032) with the plus + symbol facing up and close the battery

cover.

Lithium battery

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading Battery

Notes:

Using batteries improperly can cause them to explode. Take note of the following points:

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

Attaching the Remote Control Unit to the Steering Wheel

1. Attach the holder to the steering wheel.

The diagrams below show how to install the remote control unit on the steering wheel of a car with

the steering wheel on the Left. Install the remote control unit on the Left in a car with the steering

wheel on the right side.

Attachment to a left hand drive car

Holder

2. Installing the steering wheel remote control unit

Attachment to a left hand drive car

Attachment to a right hand drive car

Steering wheel remote control unit

Holder

Screw with washer (2.6 ✕ 5)

Attachment to a left hand drive car

Attachment to a right hand drive car

Align

Steering wheel remote control unit

Holder

Clearance

Note:

The location to be chosen for the remote control unit depends on the configuration of the steering wheel.

Make sure that the installation of the remote control unit does not prevent normal driving and that the remote

control signal reaches the remote control sensor.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

6. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

CAUTION

• Always close the DUAL ACTION before remov-

ing the DCP.

• If you remove the DCP with the DUAL ACTION

open, the sloping console closes immediately.

Be careful not to get your fingers caught.

We recommend taking the DCP with you when

leaving the car.

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it or

subject it to strong shocks.

Removing the DCP

1. With the DUAL ACTION closed, turn off the

power.

• If the [RELEASE] button is pressed and the

DCP is not locked into place, it may fall out

from vibration of the car. This can break the

DCP, so after removing it, either install it on

the unit or put it in its DCP case.

2. Press the [RELEASE] button deeply and

take and pull the DCP to detach the DCP.

• The connector connecting the unit and the

DCP is an extremely important part. Be careful

not to damage it by pressing on it with finger-

nails, screwdrivers, etc.

• If you apply to the control panel more force

than that required with the control panel left

open, the control panel will go down one step.

This is due to safety mechanism engaged and

is not a malfunction. In this case, press the [O]

button two times to return the control panel to

the original operating position. Using the con-

trol panel being lowered results in a damage

to the panel.

Attaching the DCP

1. Insert the DCP so that the A section on the

right side of the DCP catches on the hook B

on the unit.

• Do not use the control panel being left open

as a tray to put an object on.

•

Moving the control panel manually will cause a

malfunction such as getting out of order of the

sloping mechanism, breakdown of the gears,

etc. Do not draw the control panel forcibly.

When the control panel is moved manually,

press the [O] button several times to see if the

control panel returns to the normal position

and functions properly.

2. Press the left side C of the DCP carefully to

fit it in place.

• Do not remove the DCP while you are driving

a car.

• Do not use the DCP being rickety.

• Do not carry the DCP in a trouser pocket or

the like directly. (The DCP may be damaged

under load conditions.)

• The DCP may jump out of the DCP case hous-

ing the DCP when the case is opened ener-

getically.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

7. OPERATIONS

Note:Be sure to read this chapter referring to the front diagrams of

Basic Operations

chapter “3. CONTROLS” on page 5 (unfold).

Adjusting the volume

CAUTION

Turning the [ROTARY] knob clockwise increases

the volume; turning it counterclockwise de-

Be sure to lower the volume before switch-

ing off the unit power or the ignition key. The

unit remembers its last volume setting. If you

switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

creases the volume.

∗ The volume level is from 0 (minimum) to 33 (maxi-

mum).

Switching the display

Press the [DISP] button to select the desired

display.

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

Each time you press the [DISP] button, the dis-

play switches.

∗ Once selected, the preferred display becomes

the display default. When a function adjust-

ment such as volume is made, the screen will

momentarily switch to that function’s display,

then revert back to the preferred display sev-

eral seconds after the adjustment.

1. Press the [FNC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

∗ When you have entered a title in a CD/MD, it

appears in the main display. If you have not

entered a title, “D NO-TITLE” or “T NO-

TITLE” appears in the title display instead. For

information on how to enter a title, refer to the

subsection “Entering titles” in section “Op-

erations Common to Each Mode ”.

3. Press and hold the [FNC] button for 1 second

or longer to turn off the power for the unit.

Note:

• System check

The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHCK” and “Push Power”

appear in the display alternately, so press the

[FNC] button. The system check starts within the

unit. When the system check is complete, the

power is turned off, so press the [FNC] button

again.

Setting the clock

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to enter ADJ mode.

2. Press the [a] or [d] button to select the

“CLOCK”.

3. Press the [

] button.

4. Press the [a] or [d] button to select the

hour or the minute.

5. Turn the [ROTARY] knob clockwise or coun-

Selecting a mode

1. Press the [FNC] button to change the opera-

tion mode.

terclockwise to adjust the correct time.

∗ The clock displayed in 12-hour format.

6. Press the [

memory.

] button to store the time into

2. Each time you press the [FNC] button, the

operation mode changes in the following or-

der:

7. Press the [TITLE] button to return to the

previous mode.

Note:

Radio mode ➜ DAB mode ➜ SIRIUS mode

➜ CD mode ➜ DVD DECK mode ➜ CD

changer mode ➜ MD changer mode ➜ DVD

changer mode ➜ TV mode ➜ AUX mode ➜

Radio mode...

• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the

car's battery or take out this unit, the clock is re-

set. While setting the clock, if another button or

operation is selected, the clock set mode is can-

celed.

∗ External equipment not connected with

CeNET is not displayed.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

channel (subwoofer).

Adjusting the balance

1. Press the [A-M] button and select “BAL-

ANCE”.

If you using Dolby Pro Logic source and your

speaker is only four Front L.R. + Surround L.R.,

speaker setting will be better to CTR+SW and

CTR OFF, so Center channel divided to Front

L.R. automatically.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the right speaker;

turning it counterclockwise emphasizes the

sound from the left speaker.

Note

• When SW-L + SW-R are chosen, audio output

from SW-L is not available in the PL II mode.

GAC-Processor II

∗ The factory default setting is “0”. (Adjustment

range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch +

2ch)

To make the most of the sound field reproduc-

tion of AC-Processor II, a speaker system of 4

channel + 2 channel is recommendable.

Adjusting the fader

1. Press the [A-M] button and select “FADER”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;

turning it counterclockwise emphasizes the

sound from the rear speakers.

2. Press the [a] or [d] button to select the

“SP-SETTING”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “SW L+SW R” or “CTR

+SW” mode.

∗ The factory default setting is “0”. (Adjustment

range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Note:

• When CTR + SW are chosen, audio output from

CTR is not available except in the PL II mode.

Operation BASS/TREB

Center Speaker and Sub Woofer On / Off

Select PLII Mode on and SP setting to

“CTR+SW” mode

1. Press the “BASS/TREB” mode. Each time

the [EQ] button is pressed, the adjusting item

“BASS” or “TREB” is changed cyclically.

1. Press and hold the [TITLE] button for 1 sec-

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust “BAS/TREB”.

ond or longer.

2. Press the [a] or [d] button to select the

“SP SEL”.

3. Press the [EQ] button to return to the previ-

ous mode.

3. Press the [

] button to adjust the “CTR-

∗ The Adjustment range is from –6dB to +6dB

for bass and treb.

SP” “SUB W”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “ON” or “OFF”.

∗ This parameter is reflected STD PRO mode

∗ This function is useful for Speaker Setting

Problems.

Speaker Setting

You can set up your favorite sound environment

using “Dolby Surround Pro logic II” or “AC-

Processor II” so that you can enjoy a dynamic

sound of 5.1 ch surround or 4ch + 2ch speaker.

Filter Adjustment

1. Select Dolby Pro Logic II or AC-ProII mode

and press and hold the [TITLE] button for 1

second or longer.

GDolby Pro Logic II 5.1ch surround

Center SP +Front L.R. +Surround L.R. +Sub

Woofer.

2. Press the [a] or [d] button to select the

“FILTER”.

To make the most of the sound field reproduc-

tion of Dolby Pro Logic II, a speaker system of

5.1 channel is recommendable. It has been also

designed so that a sound filed effect almost as

good as that of 5.1 channel reproduction can be

obtained even by a constitution of 4 channel + 1

3. Press the [

] button to adjust the “SUB-W

LPF” or “HPF”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust filter frequency.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

AC-Processor II Operations

∗ Sub Woofer Low Pass Filter Adjustment

Range is 50, 80, 120Hz (18dB/oct), OFF.

Dolby Pro Logic II

Dolby Pro Logic II is a matrix decoding technol-

ogy in which the updated digital matrix technol-

ogy is applied and Dolby Pro Logic is further im-

proved. It realizes excellent 5.1 channel repro-

duction of Dolby surround source as well as ste-

reo sound sources such as CDs, thereby caus-

ing a surround channel to be full-ranged (20 Hz

to 20 kHz) and become stereo. Therefore, you

can enjoy any stereo sources with dynamic

sound of 5.1 channel. According to a source to

be reproduced, Music Mode or Matrix Mode can

be selected.

∗ When PLII mode Sub Woofer Low pass Filter

Adjustment Range is 50, 80, 120Hz (12dB/

oct.), OFF.

∗ High Pass Filter adjustment Range is 50, 80,

120Hz(12dB/oct), thrgh.

Note:

• High pass filter adjustment is available for Front

2ch and Rear 2ch only AC-ProII PRO Mode.

∗ Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic” and the double-

D symbol are trademarks of Dolby Laboratories.

G Music Mode

This mode is suitable for stereo sources like

CDs. By optimizing frequency characteristics of

the surround channel, a broader and deeper

sound is assured. In addition, since broadness

of the sound field varies with recording condi-

tions of music sources, there is Adjusting Mode

which makes a finer tuning available. (cf. page

16)

G Matrix Mode

This mode is suitable for AM/FM radio.

Selection and switching of the

Dolby Pro Logic II effect

While the “Dolby PLII” indication is lit in the dis-

play, the “Dolby PLII” effect is set to “On”.

1. Setting the speaker 5.1ch ( For detail, see the

section Basic Operation - Speaker setting).

2. Press the [PLII] button so that PLII mode is

turned on. Each time the button is pressed,

the mode changes as follows: “MUSIC

MODE” ➜ ”MATRIX MODE” ➜ ”PLII OFF

MODE” ➜ ”MUSIC MODE”

3. Select the “PLII OFF MODE” to turn off the

Dolby Pro Logic effect. Also press the [VSE]

button or [EQ] button to turn off the Dolby

Pro II.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

AC-Processor II Operations

Distributing the center channel sound to the

right and left will increase the integrated

sound field image, providing you with an

natural spatial feeling of sound.

Adjusting Dolby Pro Logic II Operation

1. Select Dolby Pro Logic II mode and press

and hold the [TITLE] button for 1 second or

longer to enter “ADJ” mode.

Setting to the value 0 will produce the center

sound with the center speaker.

2. Press the [a] or [d] button to select the

“PLII DELAY”.

Setting to the value 7 will distribute the cen-

ter sound to the front speaker L/R as the ex-

isting stereo sound does.

3. Press the [

] button to adjust the “PLII

DELAY”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

AC-Processor II Operation

There are 2 modes “STD” (standard) and “PRO”

(professional) in the AC-ProII.

1. Setting the speaker to 4ch+2ch (For details,

refer to the subsection “Speaker Setting” in

the section “Basic Operations”).

∗ The adjustment range of surround speaker de-

lay is from 0m sec. to 15m sec.

∗ The adjustment made in “PLII DELAY” is re-

flected in the each mode.

Adjusting Music Mode

Use the MUSIC MODE to make more detailed

adjustments.

2. Turn off the PLII mode.

3. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

1. Select “Music Mode” and press and hold the

[TITLE] button for 1 second or longer.

4. Press the [a] or [d] button to select the

“AC-PII SEL”.

2. Press the [a] or [d] button to select the

“PLII CONT”.

5. Press the [

] button to select AC-ProII

3. Press the [

] button to adjust the “PLII

mode from “STD” or “PRO”.

CONT” detail items.

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “STD” or “PRO”.

4. Press the [a] or [d] button to select the

items.

7. Press the [TITLE] button to the previous

5. Turn the [ROTARY] knob clockwise or coun-

mode.

terclockwise to make the adjustment.

∗ The detailed adjustments depend on each of

the adjustment items. There are 3 items:

“PANORAMA”, “DIMENSION”, and “CTR

WIDTH”.

Operation AC-PII STD

1. Press the [VSE] button to enter VSE mode.

2. Press the [BND] button to select “VSE BASIC”.

PANORAMA (Y or N):

3. Press the [DIRECT] button to select VSE

Selecting PANORAMA mode will extend the

front sound field image to the rear. If sur-

round effect does not seem to be presented

sufficiently, select the setting position “Y”.

menu as below.

1. Flat:

original sound, flat equalizing

2. Bass boost: deep bass sound empha-

sized

DIMENSION (0 to 6):

3. High boost: middle and high sound area

Selecting DIMENSION mode will shift the

sound field image to the front or the rear. If

the balance of the sound field image is too

much pulled towards the front or rear, the

balance front/rear can be corrected The ad-

justing value 3 is the center position. The

range of 3 to 0 shifts the balance front/rear to

the front. The range of 3 to 6 shifts the bal-

ance front/rear to the rear.

emphasized

4. Impact:

low and high sound area em-

phasized

5. Acoustical: middle sound area empha-

sized (human voice)

6. Smooth:

quiet and graceful feeling

4. Press the [VSE] button to return to the previ-

ous mode.

CTR WIDTH (0 to 7):

5. Press and hold the [VSE] button for 1 second

or longer so that the VSE effect is turned on

or off.

Selecting CTR WIDTH mode will adjust the

localization of the center channel between

the center speaker and the front speaker L/R.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

AC-Processor II Operations

5. Press and hold the [VSE] button for 1 second

or longer so that the POSITION effect is

turned on or off.

Adjusting AC-PII STD

AC-PII STD makes natural stereo feeling for ev-

ery seat by virtual space enhancer.

VSE, which is room simulation, can correct the

sound pressure inside the car so that the uni-

form sound effect is obtained at any seats.

Adjusting AC-PII PRO

1. Select “VSE” menu which you want to edit on

the basis of.

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [a] or [d] button to select item

to be adjusted.

∗ There are “TIME ALIGN” and “SP GAIN” avail-

able for the items to be adjusted.

There are “DIFFUSE”, “CAR WIDTH” and

“CAR LENG” available for the items to be

adjusted.

4. Press the [

5. Press the [a] or [d] button to select the

channel to be adjusted. Available channels

are: “FRONT-L”, “FRONT-R”, “REAR-L”,

“REAR-R”, “SW-L” and “SW-R”.

DIFFUSE

(Adjusts the correction

deviation of broadness)

CAR WIDTH (Adjusts the correction

deviation of width inside

the car)

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment of “TIME ALIGN” range is

from 0 cm to 500cm.

CAR LENG (Adjusts the correction

deviation of length inside

the car)

The adjustment of “SP-GAIN” range is from

0db to -20dB for each channel.

4. Turn the [ROTARY] knob clockwise or coun-

7. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

terclockwise to make the adjustment.

The adjustment range is from 1 to 10 for

each item.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

5. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

EQ Operation

There are 2 mode for sound EQ “P.EQ” mode

and “BASS/TREB” mode selecting EQUALIZ-

ING mode.

Operation AC-PII PRO

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

Arrival time of sound from the speaker can be

selected from among five types according to the

position of the seat. In addition, Time Alignment

Function enables a pinpoint speaker setting to

obtain a uniform sound effect from speakers to

the listner.

2. Press the [a] or [d] button to select the

“AC-PII SEL”.

3. Press the [

] button to enter AC-ProII se-

lect mode “STD” or “PRO”.

1. Press the [VSE] button to enter POSITION mode.

2. Press the Band button to select “POS BASIC”.

4. Then press the [a] or [d] button to select

the “EQ SEL”.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “P.EQ” or “BAS/TREB”

mode.

3. Press the [DIRECT] button to select VSE

menu as below.

1.FRONT-L, 2.FRONT-R, 3.FRONT,

4.REAR, 5.FULL SEAT

6. Press the [TITLE] button to return to the pre-

vious mode.

∗ (Factory default setting is P.EQ)

4. Press the [VSE] button to return to the previ-

ous mode.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

AC-Processor II Operations

Radio Operations

Operation P.EQ

FM reception

A full range of frequency level can be minutely

corrected with a smooth curve by frequency cor-

rection in accordance with car models. Six kinds

of P.EQ basic menus have been pre-stored in

this unit according to the car models and the

mounting positions of speakers. Thus, set it in

accordance with the car type.

For enhanced FM performance the

tuner includes signal actuated stereo control,

Enhanced Multi AGC, Impulse noise reduction

curcuits and Multipath noise reduction circuits.

Changing the reception area

This unit is initially set to USA frequency intervals

of 10kHz for AM and 200kHz for FM. When using it

outside the USA, the frequency reception range

can be switched to the intervals below.

1. Press the [EQ] button to enter “P.EQ” mode.

2. Press the Band button to select “P.EQ BA-

SIC”.

3. Press the [DIRECT] button to select P.EQ

GSetting the reception area

menu as below.

1. Press the [BND] button and select the de-

1.SEDAN-1, 2.SEDAN-2, 3.WAGON-1,

4.WAGON-2, 5.MINI VAN-1, 6.MINI VAN-2

sired radio band (FM or AM).

2. While pressing the [DISP] button, each time

you press and hold the number “6” of the [DI-

RECT] buttons for 2 seconds or longer, the

reception area switches from inside the USA

to outside the USA or from outside the USA

to inside the USA.

4. Press the [EQ] button to return to the previ-

ous mode.

5. Press and hold the [EQ] button for 1 second

or longer so that the P.EQ effect is turned on

or off.

∗ Any station preset memories are lost when the

reception area is changed.

Adjusting P.EQ

1. Select “P.EQ” menu which you want to edit

on the basis of.

Listening to the radio

1. Press the [FNC] button and select the radio

mode. The frequency or PS appears in the

display.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [a] or [d] button to select item

∗ PS: Programme service name

to be adjusted.

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the ra-

dio reception band changes in the following

order:

There are “FRONT/REAR” ,“BAND” ,“FREQ”

“GAIN” and “Q” available for the items ad-

justed.

4. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [a] or [d] button to tune in the

desired station.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

Tuning

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

∗ The parameter created in this section is also

effective when the unit is in both the “STD”

and “PRO” mode.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Seek tuning

1. Press the [BND] button and select the de-

sired band (FM or AM).

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Auto store

2. Press the [a] or [d] button to automatically

Auto store is a function for storing up to 6 sta-

tions that are automatically tuned in sequentially.

If 6 receivable stations cannot be received, a

previously stored station remains unoverwritten

at the memory position.

seek a station.

When the [d] button is pressed, the station is

sought in the direction of higher frequencies; if

the [a] button is pressed, the station is sought

in the direction of lower frequencies.

1. Press the [BND] button and select the de-

sired band (FM or AM).

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

2. Press and hold the [SC] button for 2 seconds or

longer. The stations with good reception are

stored automatically to the preset channels.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

Preset scan

Preset scan receives the stations stored in pre-

set memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [BND] button and select the de-

sired band (FM or AM).

1. Press the [SC] button.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

2. When a desired station is tuned in, press the

[SC] button again to continue receiving that

station.

2. Tune into a station.

Note:

• Be careful not to press and hold the [SC] button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

GQuick tuning:

Press and hold the [a] or [d] button for 1

second or longer to tune in a station.

GStep tuning:

Press the [a] or [d] button to manually

Instant station recall (ISR)

tune in a station.

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even oper-

ates with the unit in other modes.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio sta-

tions in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio fre-

quency automatically.

GISR memory

1. Select the station that you wish to store in ISR

memory.

2. Press and hold the [ISR] button for 2 seconds

1. Press the [BND] button and select the de-

or longer.

sired band (FM or AM).

GRecalling a station with ISR

2. Press the corresponding [DIRECT] button to

In any mode, press the [ISR] button to turn on

the radio function and tune the selected radio

station. “ISR” appears in the display. Press the

[ISR] button again to return to the previous

mode.

recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station

into preset memory.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Operations

Loading a CD

CAUTION

1. Press the [O] button. The DUAL ACTION

Be careful not to get your fingers caught

when opening and closing the DUAL AC-

TION.

opens.

CAUTION

2. Remove the CD and press the [O] button to

Be careful not to get your fingers caught

when opening and closing the DUAL AC-

TION.

close the DUAL ACTION.

Notes:

• Be sure to close the DUAL ACTION after remov-

ing the CD.

• The DUAL ACTION closes automatically 30 sec-

onds after removing the CD.

• If a CD (12 cm) is left in the ejected position for

15 seconds, the CD is automatically reloaded.

(Auto reload)

• 8 cm CDs are not auto reloaded. Be sure to re-

move it when ejected.

2. Press the [CD EJECT] button.

3. Insert a CD into the centre of the insertion

slot with the label side facing up. The CD

plays automatically after loading.

Notes:

• Never insert foreign objects into the CD insertion

slot.

• If the CD is not inserted easily, there may be an-

other CD in the mechanism or the unit may re-

quire service.

• f you force a CD into before auto reloading, this

can damage the CD.

• When it fails in eject operation when the eject but-

ton is pressed down, fully press the eject button

down again. (If the eject button operation is in-

complete, it means that the Dual Action Mecha-

nism is suspended, so do not perform other fur-

ther operation without releasing the Dual Action

Mechanism stopped midway.)

• Discs not bearing the

mark and

CD-ROMs cannot be played by this unit.

Loading 8 cm compact discs

∗ No adapter is required to play an 8 cm CD.

∗ Insert the 8 cm CD into the centre of the inser-

tion slot.

Selecting a track

4. After loading a CD, the DUAL ACTION

closes automatically.

Notes:

GTrack-up

1. Press the [d] button to move ahead to the

beginning of the next track.

• Note that DUAL ACTION closes immediately after

a CD is inserted into CD insertion slot.

• If no CD is loaded in the DUAL ACTION, it closes

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

after 30 seconds.

GTrack-down

1. Press the [a] button to move back to the

Listening to a CD already inserted

Press the [FNC] button to select the CD mode.

Play starts automatically. If no CD is loaded in

the unit, “NO DISC” appears in the display.

beginning of the current track.

2. Press the [a] button twice to move to the

beginning of the previous track.

Fast-forward/fast-backward

GFast-forward

Pausing play

1. Press the [

] button to pause play.

“PAUSE” appears in the display.

Press and hold the [d] button for 1 second or

longer.

2. To resume CD play, press the [

again.

] button

GFast-backward

Press and hold the [a] button for 1 second or

longer.

Ejecting a CD

1. Press the [O] button. The DUAL ACTION

opens. Press the [CD EJECT] button to eject

a CD. “EJECT” appears in the display.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Operations

Top function

Operations Common to

Each Mode

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

Entering titles–DISC or STATION

TITLE

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be en-

tered for each mode are as follows.

Scan play

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled.

∗ The scan play is useful when you want to select a

desired track.

Mode

CD mode

TV mode

Number of titles

50 titles

15 titles

1. Press the [SC] button to start scan play. “SCN”

lights in the display.

CD changer mode

CDC655z connected

CDC655Tz connected

CDC1255z connected

Number of titles

60 titles

2. To cancel the scan play, press the [SC] but-

ton again. “SCN” goes off from the display

and the current track continues to play.

100 titles

50 titles

Repeat play

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled.

1. Press the [FNC] button to select the mode

you want to enter a title (CD, CD changer or

TV).

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

1. Press the [RP] button. “RPT” lights in the dis-

play and the current track is repeated.

2. To cancel the repeat play, press the [RP] but-

ton again. “RPT” goes off from the display and

normal play resumes.

3. Press the [DISP] button and display the

main.

4. Press the [TITLE] button. “TITL” appears in

the display and the cursor position flashes.

Random play

The random play selects and plays individual tracks

on a disc in no particular order. This function con-

tinues automatically until it is cancelled.

5. Press the [a] or [d] button to move the

cursor.

6. Press the [DISP] button to select a character.

Each time you press the [DISP] button, the

character changes in the following order:

1. Press the [RD] button. “RDM” lights in the dis-

play, an individual track is selected randomly

and play begins.

Capital letters ➜ Small letters ➜ Numbers

and Symbols ➜ Umlaut ➜ Capital letters...

2. To cancel the random play, press the [RD] but-

ton again. “RDM” goes off and normal play

resumes.

7. Turn the [ROTARY] knob to select the de-

sired character. Turning the [ROTARY] knob

clockwise moves the cursor to the next char-

acter; turning it counterclockwise moves the

cursor to the previous character.

8. Repeat steps 5 to 7 to enter up to 10 charac-

ters for the title.

9. Press and hold the [

] button for 2 sec-

onds or longer to store the title into memory

and cancel title input mode.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

4. Press the [TITLE] button to return to the pre-

Entering titles–Adjusted Effect

items title

You can give a title to the user memory of the

AC-PII VSE POSITION and P.EQ that you have

adjusted.

vious mode.

∗ Adjustment range is off to LV5.

∗ Factory default setting is LV3.

Contrast

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

1. Select the adjustment mode in which you

want to give a title.

2. Press the [BND] button to select the user

2. Press the [a] or [d] button to select the

“CONTRAST”.

preset side.

3. Press one of the [DIRECT] buttons to select

the use memory to which you want to give a

title.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust Contrast level.

4. Press the [TITLE] button to return to the pre-

4. Press the [TITLE] button.

vious mode.

∗ Adjustment range is LV1 to LV18

∗ Factory default setting is LV18.

5. Press the [a] or [d] button to move the

cursor.

6. Press the [DISP] button to select the charac-

ter. Each time you press the [DISP] button,

the character changes in the following order:

Capital letters ➜ Small letters ➜ Numbers

and Symbols ➜ Umlaut ➜ Capital letter…

Key Illumi

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

2. Press the [a] or [d] button to select the

“KEY ILLUMI”.

7. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust desired character.

3. Turn the [ROTARY] knob clockwise or coun-

8. Repeat steps 5 to 7 to enter up to 10 charac-

ters for the title.

terclockwise to select Key illumi color.

4. Press the [TITLE] button to return to the pre-

9. Press and hold the the [

] button for 2

vious mode.

∗ Selectable color is Green or Red.

∗ Factory default setting is Green.

second or longer to store the title into

memory and cancel title input mode.

Clearing titles

Message display

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

When the unit is powered on or off, a message

is displayed. The user can turn this message

display ON or OFF.

2. Press the [DISP] button and display the

∗ The factory default setting is “ON”.

main.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

3. Press the [TITLE] button. “TITL” appears in

the display and the display switches to the

title input display.

2. Press the [a] or [d] button to select “MES-

SAGE”.

4. Press the [BND] button.

5. Press and hold the [

] button for 2 sec-

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to set the message display ON

or OFF.

onds or longer to clear the title and cancel

title input mode.

4. Press the [TITLE] button to return to the pre-

vious mode.

Dimmer Level

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

2. Press the [a] or [d] button to select the

“DIMMER LV”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust Dimmer level.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select AUTO SS type or

AUTO SS off.

Beep

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

5. Press the [TITLE] button to return to the pre-

2. Press the [a] or [d] button to select the

“BEEP”.

vious mode.

SS type are SS OFF, SS PTN1, SS PTN2,

SS PTN3, SS RANDOM

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to switch Beep on or Beep off.

4. Press the [TITLE] button to return to the pre-

Displaying titles

This unit can display title data and user title data

input with this unit.

vious mode.

∗ Factory default setting is Beep on.

1. Press the [DISP] button to display the title.

AUX function

This system has an external RCA input so you

can listen to sounds and music from external

devices connected to this unit.

2. Each time you press and hold the [DISP] but-

ton for 1 second or longer, the title display

changes.

Note:

The contents of the title to be displayed depend on

a disc to be played.

If a disc with no title or user title input is played,

“NO-TITLE “ appears in the display.

Selecting AUX IN sensitivity

Make the following settings to select the sensi-

tivity when sounds from external devices con-

nected to this unit are difficult to hear even after

adjusting the volume.

Setting the method for title scroll

Set how to scroll in CD-TEXT or MD.

∗ The factory default setting is “ON”.

∗ The factory default setting is “SENS LOW”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to set the Adjust mode.

1. Press and hold the [TITLE] button for 1 sec-

2. Press the [a] or [d] button and select

“AUX SENS”.

ond or longer to set the Adjust mode.

2. Press the [a] or [d] button and select

“AUTO SCROLL”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and select from

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise and select “ON” or “OFF”.

“SENS HIGH”, “SENS MID” or “SENS LOW”.

4. Press the [TITLE] button to return to the pre-

G “SCROLL ON”

vious mode.

To scroll automatically.

G “SCROLL OFF”

Screen saver function

This unit is provided with the screen saver func-

tion which allows you to show various kinds of

patterns and characters in the Operation Status

indication area of the display. You can turn on

and off this function.

To scroll just 1 time when the title was

changed or the title key was pressed.

4. Press the [TITLE] button to return to the pre-

vious mode.

If the button operation is performed with the

screen saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “RANDOM”.

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

2. Press the [a] or [d] button to select the

“AUTO SS”.

3. Press [

mode.

] to enter the AUTO SS ADJ

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

8. OPERATIONS OF ACCESSORIES

CD/MD/DVD Changer Operations

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

CD/MD/DVD changer functions

When an optional CD/MD/DVD changer is con-

nected through the CeNET cable, this unit con-

trols all changer functions. This unit can control

a total of 2 changers (MD or CD or DVD).

GTrack-down

1. Press the [a] button to move back to the

beginning of the current track.

Press the [FNC] button and select the CD/MD/

DVD changer mode to start play. If 2 changers

are connected, press the [FNC] button to select

the changer for play.

2. Press the [a] button twice to move to the

beginning of the previous track.

∗ If “NO MAGAZINE” appears in the display, insert

the magazine into the changer. “LOADING” appears

in the display while the player loads (checks) the

magazine.

Fast-forward/fast-backward

GFast-forward

Press and hold the [d] button for 1 second or

∗ If “NO DISC” appears in the display, eject the maga-

zine and insert discs into each slot. Then, reinsert

the magazine back into the changer.

longer.

GFast-backward

Press and hold the [a] button for 1 second or

longer.

CAUTION

CD-ROM discs and CD-R discs cannot be

played in the CD changer.

Top function

The top function plays from the first track or

chapter of the disc.

Pausing play

1. Press the [

GWhen playing a disc 1 to 6

] button to pause play.

Press the [DIRECT] button (1 to 6) with the

same number as the DISC playing.

“PAUSE” appears in the display.

2. To resume play, press the [

] button again.

GWhen playing a disc 7 to 12 (only when a

12 disc CD changer is used.)

Press and hold for 1 second or longer the [DI-

RECT] button (1 to 6) with the same number as

the DISC playing.

∗ If a DISC is not loaded in a slot of magazine, press-

ing the [DIRECT] button corresponding to its disc

number is invalid.

Selecting a DISC

Each [DIRECT] button corresponds to a disc

loaded into the magazine.

GSelecting a disc from 1 to 6

Press the corresponding [DIRECT] button (1 to

6) to select the desired disc.

GSelecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

Scan play

Scan play locates and plays the first 10 seconds

of each track on a disc automatically. This func-

tion continues on the disc until it is cancelled.

Press and hold the [DIRECT] button (1 to 6) for

1 second or longer to select the desired disc.

∗ If a DISC is not loaded in a slot of magazine, press-

ing the [DIRECT] button corresponding to its disc

number is invalid.

∗ The scan play is useful when you want to select a

desired track.

1. Press the [SC] button to start track scanning.

“SCN” lights in the display.

Selecting a track

2. To cancel the scan play, press the [SC] but-

ton again. “SCN” goes off from the display

and the current track continues to play.

GTrack-up

1. Press the [d] button to move ahead to the

beginning of the next track.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MD/DVD Changer Operations

Disc scan play

Disc random play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected DISC changer. This function con-

tinues automatically until it is cancelled.

The disc random play selects and plays indi-

vidual tracks or discs automatically in no par-

ticular order. This function continues automati-

cally until it is cancelled.

∗ Disc scan play is useful when you want to select a

1. Press and hold the [RD] button for 1 second

or longer. “DISC” and “RDM” light in the dis-

play and disc random play starts.

desired DISC .

1. Press and hold the [SC] button for 1 second

or longer. “DISC” and “SCN” light in the dis-

play and disc scan play starts.

2. To cancel disc random play, press and hold

the [RD] button again. “DISC” and “RDM” go

off from the display and normal play resumes

from the current track.

2. To cancel disc scan play, press the [SC] but-

ton again. “DISC” and “SCN” go off from the

display and the current track continues to

play.

Repeat play

Repeat play continuously plays the current track.

This function continues automatically until it is

cancelled.

1. Press the [RP] button. “RPT” lights in the dis-

play and the current track is repeated.

2. To cancel repeat play, press the [RP] button

again. “RPT” goes off from the display and

normal play resumes.

Disc repeat play

After all the tracks on the current disc have been

played, disc repeat play automatically replays

the current disc over from the first track. This

function continues automatically until it is can-

celled.

1. Press and hold the [RP] button for 1 second

or longer. “DISC” and “RPT” light in the dis-

play and disc repeat play starts.

2. To cancel disc repeat play, press and hold

the [RP] button again. “DISC” and “RPT” go

off from the display and normal play resumes

on the current track.

Random play

Random play selects and plays individual tracks

on the disc in no particular order. This function

continues automatically until it is cancelled.

1. Press the [RD] button. “RDM” lights in the

display and random play begins.

2. To cancel random play, press the [RD] button

again. “RDM” goes off from the display and

normal play resumes.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Operations

TV tuner functions

Manual tuning

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner and

monitor.

There are 2 ways available: Quick tuning and

step tuning.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

Watching a TV

1. Press the [FNC] button and select the TV

1. Press the [BND] button and select the de-

sired band (TV1 or TV2).

mode.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” lights in the display and manual tun-

ing is now available.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles be-

tween TV1 and TV2.

2. Tune into a station.

3. Press the [a] or [d] button to tune in the

GQuick tuning:

desired TV station.

Press and hold the [a] or [d] button for 1

second or longer to tune in a station.

Watching a video

GStep tuning:

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video cas-

sette recorder (VCR) to the TV tuner input termi-

nal.

Press the [a] or [d] button to manually

tune in a station.

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your favor-

ite TV stations and store them in memory for

later recall.

1. Press the [RD] button to select VTR.

2. To return to the TV broadcast, press the [RD]

button.

1. Press the [BND] button and select the de-

Tuning

sired TV band (TV1 or TV2).

There are 3 types of tuning mode available,

Seek tuning, manual tuning and preset tuning.

2. To recall a stored TV station, press the de-

sired [DIRECT] button to select that station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Seek tuning

1. Press the [BND] button and select the de-

sired TV band (TV1 or TV2).

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of [DIRECT] buttons for

2 seconds or longer to store the current sta-

tion into preset memory.

2. Press the [a] or [d] button to automatically

seek a station.

Press the [d] button to automatically tune

up the frequency band to the next available

TV station; press the [a] button to automati-

cally tune down.

Auto store

Auto store selects 6 TV stations automatically

and stores each one into preset memory.

If there are not 6 stations with good reception,

stations previously stored in memory remain

and only the strong stations are stored into

memory.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Operations

Digital Radio / DAB Operations

DAB control function

1. Press the [BND] button and select the de-

sired TV band (TV1 or TV2).

When a CeNET cable is used to connect a DAB

(DAH913) (sold separetely), all functions can be

operated.

2. Press and hold the [SC] button for 2 seconds

or longer. The stations with good reception

are stored automatically to the preset chan-

nels.

Listening to the DAB station

1. Press the [FNC] button to select the DAB

mode.

Preset scan

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for a desired TV station in memory.

2. When the unit receives a DAB station, the

display changes in the following order:

Frequency channel ➜ service label

1. Press the [SC] button.

Switching displays

2. When the desired station is found, press the

[SC] button again to remain tuned to that sta-

tion.

Press the [DISP] button for 1 second during the

Main (service label) display to select Main (ser-

vice label) or Sub (PTY).

Note:

Notes:

• Do not press and hold the [SC] button for 2 sec-

onds or longer. Doing so will trigger the auto store

function and start storing stations into memory.

• The display shown in the normal reception mode

and the preset reception mode is the same when

a DAB station is received.

• The number of programmes and broadcasting

times depend on the DAB stations.

• When the strength of DAB signals is weak, audio

output is muted.

Setting the TV diver

You can change the reception setting for the TV

antenna connected to the TV tuner.

1. Press and hold the [TITLE] button for 1 second or

Seek tuning

longer to switch to the adjustment selection display.

1. Press the [FNC] button to select the DAB mode.

2. Press the [a] or [d] button to select “TV

DIVER”.

2. Press and hold the [a] or [d] button for 1

second or longer.

3. Turn the [ROTARY] knob clockwise to set to

“ON” or counterclockwise to set to “OFF”.

∗ “SEARCHING” appears in the display.

3. “DAB” lights up in the display when the main

G “DIVER ON”

unit receives a DAB station.

Sets reception emphasizing the visual.

G “DIVER OFF”

* The main unit stops the seek tuning when it

cannot find a DAB station. The display returns

to the previous mode.

Sets the diver setting to OFF.

4. Press the [TITLE] button to return to the pre-

vious mode.

Manual tuning

1. Press the [FNC] button to the select the DAB

mode.

2. Press and hold the [BND] button for 1 second

or longer. “MANU” lights up in the display.

3. Press the [a] or [d] button to select a sta-

tion.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Radio / DAB Operations

Note:

Switching programmes

• Press and hold the [DIRECT] button for 2 sec-

onds or longer to store the programme currently

being received. (Manual memory)

1. Press the [FNC] button to receive a DAB station.

2. Press the [a] or [d] button to switch

programmes in the DAB station.

Note:

AF function

• The programme name may be the same depend-

ing on DAB programmes.

The AF function switches to a different fre-

quency on the same network in order to main-

tain optimum reception.

Programme scan

∗ The factory default setting is “ON”

G Switching OFF the AF function

This function scans through each receivable

programme in a DAB station being received for

10 seconds sequentially. This is useful when you

want to search for a desired programme.

Press the [RP] button. “AF” in the display goes

off and the AF function turns off.

G Switching ON the AF function

1. Press the [FNC] button to receive a DAB station.

Press the [RP] button. “AF” in the display lights

and the AF function turns on.

2. Perform the following operation depending

on the connected model.

∗

If the reception of the current broadcast station dete-

riorates, “SEARCHING SAME STATION” “SEARCH”

appears in the display and the radio searches for the

same programme on another frequency.

Press the [SC] button. “SERVICE SCN” lights

up and the unit starts scanning each

programme for 10 seconds sequentially.

Each time the main unit scans, the

programme name is shown in the display.

INFO (Announcement)

3. To stop programme scan when a desired

programme is tuned in.

In the INFO standby mode, when the selected

announcement programme starts, the main unit

switches to the selected announcement

programme automatically.

Press the [SC] button.

Manual memory

The main unit has a manual memory function for

DAB programmes. Up to 18 programmes (6

programmes each) can be preset in the preset

buttons.

GSetting the INFO standby mode

If you press and hold the [ISR] button for 1 sec-

ond or longer, “INFO” lights in the display and

the main unit is set into the INFO standby mode

until the selected announcement is broadcast.

When the selected announcement broadcast

starts, the announcement item appears in the

display. If you press and hold the [ISR] button for

1 second or longer while the selected an-

nouncement broadcast is being received, the

selected announcement broadcast reception is

cancelled and the main unit goes into the INFO

standby mode.

[M1], [M2] and [M3]

1. Press the [FNC] button to select DAB mode.

2. Press the [BND] button to select any one

shown above.

3. Press the [a] or [d] button to select a de-

sired programme.

4. Press and hold one of the [DIRECT] buttons

(1 to 6) for 2 seconds or longer to store the

programme.

GCancelling INFO standby mode

Note:

To cancel the INFO standby mode, press and

hold the [ISR] button for 1 second or longer.

• The interrupt programme (PTY or INFO) cannot

be written into a manual memory.

GInformation select

This is a function for selecting INFORMATION

ON or OFF in the Information interrupt mode.

Recalling a preset programme

1. Press the [FNC] button to select the DAB mode.

You can set ON up to 6 information items.

You can select any of the 6 items below:

2. Press the [BND] button. Each time you press

the [BND] button, the display changes in the

following order:

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

3. Press one of the [DIRECT] buttons to recall a

preset programme.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Radio / DAB Operations

G Setting TA standby mode

INFORMATION item

If you press the [ISR] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into TA standby mode until a

traffic announcement is broadcast. When a traf-

fic announcement broadcast starts, “TRA INFO”

appears in the display. If you press the [ISR] but-

ton while a traffic announcement broadcast is

being received, the traffic announcement broad-

cast reception is cancelled and the unit goes

into TA standby mode.

ENGLISH

TRAVEL

WARNING

NEWS

Contents

Transport flash

Warning / Service

News flash

WEATHER

EVENT

Area weather flash

Event announcement

Special event

SPECIAL

1. Perform the following operation depending

on the connected model.

G Cancelling TA standby mode

With “TP” and “TA” lit in the display, press the

[ISR] button. The “TA” in the display goes off and

TA standby mode is cancelled.

∗ If “TP” is not lit, pressing [ISR] button searches for

a TP station.

Press and hold the [TITLE] button for 1 second or

longer.

2. Press the [a] or [d] button to select “INFO

SEL”, then press the [

“INFO SEL” mode.

] button to enter

G Searching for a TP station

3. Press the [a] or [d] button to select an in-

When “TP” is not lit, if you press the [ISR] but-

ton, “TA” in the display lights and the unit auto-

matically receives a TP station.

formation item. You can select any of 6 items:

4. Perform the following operation depending

on the connected model.

Note:

Turn the [ROTARY] knob clockwise or

counterclock wise to set the information item

for ON or OFF.

• If a TP station is not received, the unit continues

the search operation. Pressing the [ISR] button

again goes off “TA” in the display and stops TP

station searching.

5. Press the [TITLE] button to return to the pre-

vious display.

Auto store function for TP stations

You can automatically store up to 6 TP stations

into preset memory. If the number of TP that can

be received is less than 6, broadcast stations al-

ready stored in memory are left without being

overwritten.

Switching the PTY display language

You can select one of 2 languages (English or

French) for the PTY displayed in the display.

∗ The factory default setting is “ENGLISH”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

With “TA” lit in the display, press and hold the

[SC] button for 2 seconds or longer. The TP sta-

tions with the good reception sensitivity are

stored into preset memory.

∗ Even if you select FM1 or FM2, a TP station is stored

into memory for FM3.

2. Press the [a] or [d] button and select

“LANGUAGE”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the desired language.

4. Press the [TITLE] button to return to the pre-

vious mode.

TA (Traffic Announcement)

In the TA standby mode, when a traffic announce-

ment broadcast starts, the traffic announcement

broadcast is received as top priority regardless of

the function mode. Traffic programme (TP) auto-

matic tuning is also possible.

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

DAB broadcast station being received has traffic

announcement programmes.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Radio / DAB Operations

PTY

Selecting PTY

This function enables you to listen to the se-

lected programme type, irrespective of the func-

tion mode.

1. When you press the [RD] button, the unit

goes into PTY select mode.

2. Press any one of the [DIRECT] buttons. Al-

ternatively, turn the [ROTARY] knob clock-

wise or counterclockwise to select the de-

sired PTY.

∗

PTY broadcasts are not yet available in all countries.

∗ In the INFO standby mode, INFO stations have pri-

ority over PTY stations.

∗ In the TA standby mode, TP stations have priority

over PTY stations.

∗ Below are the factory default settings stored

for the [DIRECT] buttons.

PTY item

Preset

number

ENGLISH

NEWS

Contents

News

ENGLISH Contents

NEWS

News

INFORM

SPORTS

TALK

Information

Sports

TOP 40

Top 40

COUNTRY Country music

SOFT Soft music

CLASSICL Classical

R & B Rhythm and Blues

Talk

ROCK

Rock

CLS ROCK

ADLT HIT

SOFT RCK

TOP 40

Classic Rock

Adult Hits

Soft Rock

Top 40

3. The PTY select mode is cancelled automati-

cally 7 seconds after a PTY is selected.

COUNTRY

OLDIES

SOFT

Country music

Oldies

PTY seek

1. When you press the [RD] button, the PTY se-

lect mode is turned on.

Soft music

2. Select PTY.

NOSTALGA Nostalgia

3. Press the [a] or [d] button. If you press

the [d] button, the unit seeks a PTY broad-

cast moving up the frequencies; if you press

the [a] button, it seeks moving down the

frequencies.

JAZZ

Jazz

CLASSICL

R & B

Classical

Rhythm and Blues

Soft Rhythm and Blues

SOFT R&B

LANGUAGE Language

∗ If no station with the selected PTY broadcast

can be received, the unit returns to PTY select

mode.

REL MUSC

REL TALK

PERSNLTY

PUBLIC

Religious music

Religious talk

Personality

Public

PTY preset memory

1. When you press the [RD] button, the PTY se-

lect mode is turned on.

G Setting PTY standby mode

When you press the [RD] button, “PTY” lights in

the display and the PTY standby mode is turned

on. When the selected PTY broadcast starts, the

PTY item name appears in the display.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the desired PTY.

3. If you press and hold any one of the [DI-

RECT] buttons for 2 seconds or longer, the

selected PTY is stored into that preset chan-

nel memory.

G Cancelling PTY standby mode

When you press and hold the [RD] button for 1

second or longer, “PTY” goes off in the display

and PTY standby mode is cancelled.

Emergency broadcast

G Cancelling a PTY interrupt broadcast

When an emergency broadcast is received, all

the function mode operations are stopped.

“ALARM” appears in the display and the emer-

gency broadcast can be heard.

Press the [RD] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Radio / DAB Operations

DVD DECK Operations

G Cancelling an emergency broadcast

Operation

GPlay/Still operation

If you press [RP] button, emergency broadcast

reception is cancelled.

Press the [

] button to select the desired

mode (play, still (pause)).

Volume setting of TA, INFO,

emergency broadcast (ALARM) and

PTY

The volume for TA, INFO, ALARM and PTY in-

terrupts can be set during TA, INFO, ALARM

and PTY interrupt. Perform the following opera-

tion depending on the connected model.

Each time the button is pressed, the mode

changes cyclically.

GChapter up/down operation (FF/FB opera-

tion)

Press the [d] button for 1 second or shorter to

increment chapters.

Hold down the [d] button for 1 second or longer

∗ The factory default setting is “15”.

to fast forward.

During a TA, INFO, ALARM or PTY interrupt,

turn the [ROTARY] knob clockwise or counter-

clockwise to set the volume to a desired level (0

to 33).

Press the [a] button for 1 second or shorter to

decrement chapters.

Hold down the [a] button for 1 second or longer

to fast backward.

∗ When the TA, INFO,ALARM or PTY interrupt ends,

the volume returns to the level it had before the in-

terrupt.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

9. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not turn

on.

(No sound is pro-

duced.)

Fuse is blown.

Replace with a fuse of the same amperage. If

the fuse blows again, consult your store of pur-

chase.

Incorrect wiring.

Consult your store of purchase.

No sound output

Power antenna lead is shor- 1. Turn the unit off.

ted to ground or excessive

when operating the

2. Remove all wires attached to the power anten-

unit with amplifiers or current is required for

power antenna

attached.

na lead. Check each wire for a possible short

to ground using an ohm meter.

remote-on the amplifiers or

power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the

power antenna lead one by one. If the amplifi-

ers turn off before all wires are attached, use

an external relay to provide remote-on voltage

(excessive current required).

Nothing happens

when buttons are

pressed.

The microprocessor has

Turn off the power, then

Reset button

malfunctioned due to noise, press the [RELEASE]

etc.

button and remove the

DCP.

Press the reset button

with a thin rod.

Display is not accu-

rate.

DCP or main unit connec-

tors are dirty.

Wipe the dirt off with a soft cloth moistened with

cleaning alcohol.

Compact disc cannot Another compact disc is

be loaded. already loaded.

Eject the compact disc before loading the new

one.

Sound skips or is noi- Compact disc is dirty.

Clean the compact disc with a soft cloth.

sy.

Compact disc is heavily

scratched or warped.

Replace with a compact disc with no scratches.

Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.

after power is turned the internal lens when the

on.

car is parked in a humid

place.

Poor sound quality

The equalizer levels are too If the equalizer levels are too high, the sound

high.

may distort. Lower the equalizer levels.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

Measure

A CD is caught inside the CD deck and is

not ejected.

This is a failure of CD deck’s mechanism and

consult your store of purchase.

ERROR 3

A CD cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A CD cannot be played due to pick up fail-

ure.

Consult your store of purchase.

ERROR 6

ERROR 2

ERROR 3

A CD is loaded upside-down inside the CD

deck and does not play.

Eject the disc then reload it properly.

A CD inside the CD changer is not loaded.

This is a failure of CD changer’s mechanism

and consult your store of purchase.

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped

disc.

A CD cannot be played due to pick up fail-

ure.

Consult your store of purchase.

ERROR 6

ERROR H

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when the temperature in the MD

changer is too high and playback has been

stopped automatically.

Lower the surrounding temperature and wait

for a while to cool off MD changer.

ERROR 2

ERROR 3

ERROR 6

An MD inside the MD changer is not loaded. This is a failure of MD changer’s mechanism

and consult your store of purchase.

An MD inside the MD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped

disc.

An MD inside the MD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is

loaded in the MD changer.

Load a pre-recorded MD in the MD changer.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Error Display

ERROR 2

Cause

Measure

A DISC inside the DVD changer cannot be

played.

This is a failure of dvd mechanism and con-

sult your store of purchase.

ERROR 3

ERROR 6

A DISC cannot be played due to scratches,

etc.

Retry or replace with a non-scratched, non-

warped-disc.

A DISC inside the DVD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly

Set the correct Parental level.

ERROR P

ERROR R

Parental level error

Region code error

Eject the disc and replace correct region

code disc.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ935

Download from Www.Somanuals.com. All Manuals Search And Download.

Continental Electric Iron CE23121 User Manual
Craftsman Pressure Washer 580751781 User Manual
Curtis CRT Television TV2710 User Manual
Cypress Computer Hardware CY14B102L User Manual
DigiTech Musical Toy Instrument Dirty Robot User Manual
Dixon Lawn Mower ZTR 5425 User Manual
FEIN Power Tools Drill ASKEU 636 Kin User Manual
Furman Sound Power Supply PF Pro R User Manual
Garland Cooktop M48 23R User Manual
Global Machinery Company Automobile C4500 User Manual