C H A P T E R
8
Monitoring the Cisco Unified IP Phone Remotely
Each Cisco Unified IP Phone has a web page from which you can view a variety of information about
the phone, including:
•
•
•
•
•
Device information
Network configuration information
Network statistics
Device logs
Streaming statistics
Note
The Cisco Unified IP Phone does not support web access on its IPv6 address.
This chapter describes the information that you can obtain from the phone’s web page. You can use this
information to remotely monitor the operation of a phone and to assist with troubleshooting.
You can also obtain much of this information directly from a phone. For more information, see Viewing
Model Information, Status, and Statistics on the Cisco Unified IP Phone.
For more information about troubleshooting the Cisco Unified IP Phone, see Troubleshooting and
Maintenance.
This chapter includes these topics:
•
•
•
•
•
•
•
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Disabling and Enabling Web Page Access
•
Streaming Statistics—Includes the following hyperlinks
–
Stream 1, Stream 2, Stream 3, Stream 4, or Stream 5—Display a variety of streaming statistics.
Disabling and Enabling Web Page Access
For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you
will prevent access to the web pages that are described in this chapter and to the Cisco Unified
Communications Manager User Options web pages.
You can enable or disable access to the web pages for an individual phone, a group of phones, or to all
phones in the system.
To enable or disable access to the web pages for all phones on the system, choose System > Enterprise
Parameters and select Enabled or Disabled from the Web Access drop-down menu.
To enable or disable access to the web pages for a group of phones, choose Device > Device Settings >
Common Phone Profile to create a new phone profile or to update an existing phone profile, select
Enabled or Disabled from the Web Access drop-down menu and select the common phone profile when
you configure your phone.
To enable or disable access to the web pages for a phone, follow these steps from Cisco Unified
Communications Manager Administration.
Procedure
Step 1
Step 2
Step 3
Step 4
Choose Device > Phone.
Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Click the device name to open the Phone Configuration window for the device.
Scroll down to the Product Specific Configuration section. From the Web Access drop-down list box,
choose Disabled if you want to disable your phone and choose Enabled if you want to enable your
phone.
Step 5
Click Update.
Note
Some features, such as Cisco Quality Report Tool, do not function properly without access to
the phone web pages. Disabling web access also affects any serviceability application that relies
on web access, such as CiscoWorks.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols
Configuring the Cisco Unified IP Phone to use HTTP/HTTPS
Protocols
The Cisco Unified IP Phone can be configured to use:
•
•
The HTTPS protocol only
The HTTP or HTTPS protocols
If your Cisco Unified IP Phone is configured to use the HTTP or HTTPS protocols (the second case
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
To display the Device Information area, access the web page for the phone as described in the Accessing
Table 8-1
Device Information Area Items
Item
Description
MAC Address
Host Name
Phone DN
App Load ID
Boot Load ID
Version
Media Access Control (MAC) address of the phone
Unique, fixed name that is automatically assigned to the phone based on its MAC address
Directory number assigned to the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the phone
Version of the firmware running on the phone
Expansion Module 1 Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914, if connected to the
phone
Expansion Module 2 Phone load ID for the second Cisco Unified IP Phone Expansion Module 7914, if connected to the
phone
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Revision value of the phone hardware
Serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on any line for this phone
Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
•
•
•
•
Device Type—Indicates hardware type. For example, phone displays for all phone models
Device Description—Displays the name of the phone associated with the indicated model type
Product Identifier—Specifies the phone model
Version Identifier—Represents the hardware version of the phone
The Version Identifier field might display a blank screen if the user is using an older model Cisco
Unified IP Phone, because the hardware does not provide this information.
•
Serial Number—Displays the phone’s unique serial number
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Table 8-1
Device Information Area Items (continued)
Description
Item
Time
Time obtained from the Date/Time Group in Cisco Unified Communications Manager to which the
phone belongs
Time Zone
Date
Time zone obtained from the Date/Time Group in Cisco Unified Communications Manager to which
the phone belongs
Date obtained from the Date/Time Group in Cisco Unified Communications Manager to which the
phone belongs
Network Configuration
The Network Configuration area on a phone’s web page displays network configuration information and
You can view and set many of these items from the Network Configuration Menu and the Device
Configuration Menu on the Cisco Unified IP Phone. For more information, see Configuring Features,
Templates, Services, and Users
To display the Network Configuration area, access the web page for the phone as described in Accessing
Table 8-2
Network Configuration Area Items
Item
Description
DHCP Server
IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the
phone obtains its IP address.
BOOTP Server
Indicates whether the phone obtains its configuration from a Bootstrap Protocol (BootP)
server.
MAC Address
Host Name
Media Access Control (MAC) address of the phone.
Host name that the DHCP server assigned to the phone.
Name of the Domain Name System (DNS) domain in which the phone resides.
Internet Protocol (IP) address of the phone.
Domain Name
IP Address
Subnet Mask
TFTP Server 1
Subnet mask used by the phone.
Primary Trivial File Transfer Protocol (TFTP) server used by the phone.
Default Router 1–5
Default router used by the phone (Default Router 1) and optional backup routers (Default
Router 2–5).
DNS Server 1–5
Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS
servers (DNS Server 2–5) used by the phone.
Operational VLAN ID
Admin. VLAN ID
Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in
which the phone is a member.
Auxiliary VLAN in which the phone is a member.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Table 8-2
Network Configuration Area Items (continued)
Item
Description
Unified CM 1–5
Host names or IP addresses, in prioritized order, of the Cisco Unified Communications
Manager servers with which the phone can register. An item can also show the IP address
of an SRST router that is capable of providing limited Cisco Unified Communications
Manager functionality, if such a router is available.
For an available server, an item will show the Cisco Unified Communications Manager
server IP address and one of the following states:
•
•
•
Active—Cisco Unified Communications Manager server from which the phone is
currently receiving call-processing services.
Standby—Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable.
Blank—No current connection to this Cisco Unified Communications Manager server.
An item may also include the Survivable Remote Site Telephony (SRST) designation,
which identifies an SRST router capable of providing Cisco Unified Communications
Manager functionality with a limited feature set. This router assumes control of call
processing if all other Cisco Unified Communications Manager servers become
unreachable. The SRST Cisco Unified Communications Manager always appears last in
the list of servers, even if it is active. You configure the SRST router address in the Device
Pool section in Cisco Unified Communications Manager Configuration window.
Information URL
Directories URL
Messages URL
URL of the help text that appears on the phone.
URL of the server from which the phone obtains directory information.
URL of the server from which the phone obtains message services.
URL of the server from which the phone obtains Cisco Unified IP Phone services.
Indicates whether DHCP is being used by the phone.
Services URL
DHCP Enabled
DHCP Address Released
Indicates the setting of the DHCP Address Released option on the phone’s Network
Configuration menu.
Alternate TFTP
Idle URL
Indicates whether the phone is using an alternative TFTP server.
URL that the phone displays when the phone has not been used for the time specified by
Idle URL Time, and no menu is open.
Idle URL Time
Number of seconds that the phone has not been used and no menu is open before the XML
service specified by Idle URL is activated.
Proxy Server URL
URL of proxy server, which makes HTTP requests to non-local host addresses on behalf of
the phone HTTP client and provides responses from the non-local host to the phone HTTP
client.
Authentication URL
URL that the phone uses to validate requests made to the phone web server.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Table 8-2
Network Configuration Area Items (continued)
Item
Description
SW Port Configuration
Speed and duplex of the switch port, where:
•
•
•
•
•
•
A—Auto Negotiate
10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
100H—100-BaseT/half duplex
100F—100-BaseT/full duplex
No Link—No connection to the switch port
PC Port Configuration
Speed and duplex of the switch port, where:
•
•
•
•
•
•
A—Auto Negotiate
10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
100H—100-BaseT/half duplex
100F—100-BaseT/full duplex
No Link—No connection to the PC port
TFTP Server 2
User Locale
Backup TFTP server that the phone uses if the primary TFTP server is unavailable.
User locale associated with the phone user. Identifies a set of detailed information to
support users, including language, font, date and time formatting, and alphanumeric
keyboard text information.
Network Locale
Network locale associated with the phone user. Identifies a set of detailed information to
support the phone in a specific location, including definitions of the tones and cadences
used by the phone.
Headset Enabled
Indicates whether the Headset button is enabled on the phone.
Version of the user locale loaded on the phone.
User Locale Version
Network Locale Version
PC Port Disabled
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous ARP responses.
Speaker Enabled
GARP Enabled
Video Capability Enabled
Indicates whether the phone can participate in video calls when connected to an
appropriately equipped PC.
Voice VLAN Enabled
Indicates whether the phone allows a device attached to the PC port to access the Voice
VLAN.
Auto Line Select
Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP IP classification for call control signaling.
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Mode
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Web Access Enabled
Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Statistics
Table 8-2
Network Configuration Area Items (continued)
Item
Description
Span to PC Port
Indicates whether the phone will forward packets transmitted and received on the network
port to the access port.
PC VLAN
VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
Forwarding Delay
Indicates whether the internal switch begins forwarding packets between the PC port and
switched port on the phone when the phone becomes active.
LLDP: PC Port
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port.
LLDP-MED: SW Port
Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch port.
LLDP Asset ID
Identifies the asset ID assigned to the phone for inventory management.
Wireless Headset
Hookswitch Control
Enables users to receive notifications of incoming calls and answer or end calls while
working in a wireless environment.
LLDP Power Priority
Advertises the phone’s power priority to the switch, enabling the switch to appropriately
provide power to the phones. Settings include:
•
•
•
•
Unknown—default
Low
High
Critical
CDP: PC Port
Indicates whether CDP is supported on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage (CVTA)
is connected to the PC port. CVTA does not work without CDP interaction with the phone.
Note
When CDP is disabled in Cisco Unified Communications Manager, a warning is
displayed, indicating that disabling CDP on the PC port prevents CVTA from
working.
Note
The current PC and switch port CDP values are shown on the Settings menu.
CDP: SW Port
Indicates whether CDP is supported on the switch port (default is enabled).
•
Enable CDP on the switch port for VLAN assignment for the phone, power
negotiation, QoS management, and 802.1x security.
•
Enable CDP on the switch port when the phone is connected to a Cisco switch.
Note
When CDP is disabled in Cisco Unified Communications Manager, a warning is
presented, indicating that CDP should be disabled on the switch port only if the
phone is connected to a non-Cisco switch.
Note
The current PC and switch port CDP values are shown on the Settings menu.
Network Statistics
The following network statistics hyperlinks on a phone’s web page provide information about network
traffic on the phone. To display a network statistics area, access the web page for the phone as described
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Statistics
•
•
•
this area.
Access—Displays information about network traffic to and from the PC port on the phone. Table 8-4
describes the items in this area.
Network—Displays information about network traffic to and from the network (SW) port on the
Table 8-3
Ethernet Information Items
Item
Description
Tx Frames
Tx broadcast
Tx multicast
Tx unicast
Rx Frames
Rx broadcast
Rx multicast
Rx unicast
RxPacketNoDes
Total number of packets transmitted by the phone
Total number of broadcast packets transmitted by the phone
Total number of multicast packets transmitted by the phone
Total number of unicast packets transmitted by the phone
Total number of packets received by the phone
Total number of broadcast packets received by the phone
Total number of multicast packets received by the phone
Total number of unicast packets received by the phone
Total number of shed packets caused by no Direct Memory Access (DMA) descriptor
Table 8-4
Access Area and Network Items
Item
Description
Rx totalPkt
Rx crcErr
Rx alignErr
Total number of packets received by the phone
Total number of packets received with CRC failed
Total number of packets received between 64 and 1522 bytes in length that have a bad
Frame Check Sequence (FCS)
Rx multicast
Rx broadcast
Rx unicast
Total number of multicast packets received by the phone
Total number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Rx shortErr
Total number of FCS error packets or Align error packets received that are less than 64
bytes in size
Rx shortGood
Rx longGood
Rx longErr
Total number of good packets received that are less than 64 bytes size
Total number of good packets received that are greater than 1522 bytes in size
Total number of FCS error packets or Align error packets received that are greater than
1522 bytes in size
Rx size64
Total number of packets received, including bad packets, that are between 0 and 64 bytes
in size
Rx size65 to127
Rx size128 to255
Total number of packets received, including bad packets, that are between 65 and 127
bytes in size
Total number of packets received, including bad packets, that are between 128 and 255
bytes in size
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Device Logs
Table 8-4
Access Area and Network Items (continued)
Item
Description
Rx size256 to511
Total number of packets received, including bad packets, that are between 256 and 511
bytes in size
Rx size512 to1023
Rx size1024 to1518
Total number of packets received, including bad packets, that are between 512 and 1023
bytes in size
Total number of packets received, including bad packets, that are between 1024 and 1518
bytes in size
Rx tokenDrop
Tx excessDefer
Tx lateCollision
Total number of packets dropped due to lack of resources (for example, FIFO overflow)
Total number of packets delayed from transmitting due to medium being busy
Number of times that collisions occurred later than 512 bit times after the start of packet
transmission
Tx totalGoodPkt
Tx Collisions
Total number of good packets (multicast, broadcast, and unicast) received by the phone
Total number of collisions that occurred while a packet was being transmitted
Tx excessLength
Total number of packets not transmitted because the packet experienced 16 transmission
attempts
Tx broadcast
Total number of broadcast packets transmitted by the phone
Total number of multicast packets transmitted by the phone
Total number of LLDP frames sent out from the phone
Total number of LLDP frames that have been time out in cache
Tx multicast
LLDP FramesOutTotal
LLDP AgeoutsTotal
LLDP FramesDiscardedTotal Total number of LLDP frames that are discarded when any of the mandatory TLVs is
missing or out of order or contains out of range string length.
LLDP FramesInErrorsTotal
LLDP FramesInTotal
Total number of LLDP frames that received with one or more detectable errors
Total number of LLDP frames received on the phone.
LLDP TLVDiscardedTotal
Total number of LLDP TLVs that are discarded.
LLDP TLVUnrecognizedTotal Total number of LLDP TLVs that are not recognized on the phone.
CDP Neighbor Device ID
CDP Neighbor IP Address
CDP Neighbor Port
Identifier of a device connected to this port discovered by CDP protocol.
IP address of the neighbor device discovered by CDP protocol.
Neighbor device port to which the phone is connected discovered by CDP protocol.
Identifier of a device connected to this port discovered by LLDP protocol.
IP address of the neighbor device discovered by LLDP protocol.
LLDP Neighbor Device ID
LLDP Neighbor IP Address
LLDP Neighbor Port
Neighbor device port to which the phone is connected discovered by LLDP protocol.
Device Logs
The following device logs hyperlinks on a phone’s web page provide information you can use to help
monitor and troubleshoot the phone. To access a device log area, access the web page for the phone as
•
Console Logs—Includes hyperlinks to individual log files. The console log files include debug and
error messages received on the phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
•
•
Core Dumps—Includes hyperlinks to individual dump files. The core dump files include data from
a phone crash.
Status Messages—Displays up to the 10 most recent status messages that the phone has generated
since it was last powered up. You can also see this information from the Status Messages screen on
the phone. Table 7-2 describes the status messages that can appear.
•
Debug Display—Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting.
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A
phone streams information when it is on a a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone’s web page provide information about the streams. Most calls
use only one stream (Stream 1), but some calls use two or three streams. For example, a barged call uses
Stream 1 and Stream 2.
To display a Streaming Statistics area, access the web page for the phone as described in the Accessing
Stream 4, or the Stream 5 hyperlink.
Table 8-5 describes the items in the Streaming Statistics areas.
Table 8-5
Streaming Statistics Area Items
Item
Description
Remote Address
Local Address
Start Time
IP address and UDP port of the destination of the stream.
IP address and UPD port of the phone.
Internal time stamp indicating when Cisco Unified Communications Manager requested
that the phone start transmitting packets.
Stream Status
Host Name
Indication of whether streaming is active or not.
Unique, fixed name that is automatically assigned to the phone based on its MAC address.
Sender Packets
Total number of RTP data packets transmitted by the phone since starting this connection.
The value is 0 if the connection is set to receive only mode.
Sender Octets
Total number of payload octets transmitted in RTP data packets by the phone since starting
this connection. The value is 0 if the connection is set to receive only mode.
Sender Codec
Type of audio encoding used for the transmitted stream.
Sender Reports Sent1
Sender Report Time Sent1
Rcvr Lost Packets
Number of times the RTCP Sender Report have been sent.
Internal time stamp indication when the last RTCP Sender Report was sent.
Total number of RTP data packets that have been lost since starting receiving data on this
connection. Defined as the number of expected packets less the number of packets actually
received, where the number of received packets includes any that are late or duplicate. The
value displays as 0 if the connection was set to send-only mode.
Avg Jitter
Estimate of mean deviation of the RTP data packet inter-arrival time, measured in
milliseconds. The value displays as 0 if the connection was set to send-only mode.
Rcvr Codec
Type of audio encoding used for the received stream.
Rcvr Reports Sent1
Number of times the RTCP Receiver Reports have been sent.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Table 8-5
Item
Streaming Statistics Area Items (continued)
Description
Rcvr Report Time Sent1
Internal time stamp indication when a RTCP Receiver Report was sent.
Rcvr Packets
Total number of RTP data packets received by the phone since starting receiving data on
this connection. Includes packets received from different sources if this is a multicast call.
The value displays as 0 if the connection was set to send-only mode.
Rcvr Octets
MOS LQK
Total number of payload octets received in RTP data packets by the device since starting
reception on the connection. Includes packets received from different sources if this is a
multicast call. The value displays as 0 if the connection was set to send-only mode.
Score that is an objective estimate of the mean opinion score (MOS) for listening quality
(LQK) that rates from 5 (excellent) to 1 (bad). This score is based on audible concealment
events due to frame loss in the preceding 8-second interval of the voice stream. For more
information, see Monitoring the Voice Quality of Calls, page 9-15.
Note
The MOS LQK score can vary based on the type of codec that the
Cisco Unified IP Phone uses.
Avg MOS LQK
Min MOS LQK
Max MOS LQK
Average MOS LQK score observed for the entire voice stream.
Lowest MOS LQK score observed from start of the voice stream.
Baseline or highest MOS LQK score observed from start of the voice stream.
These codecs on the Cisco Unified IP Phones 7962G and 7942G provide the following
maximum MOS LQK score under normal conditions with no frame loss:
•
•
•
•
G.711 gives 4.5
G.722 gives 4.5
G.728/iLBC gives 3.9
G.729 A/AB gives 3.8
These codecs on the Cisco Unified IP Phones 7961G/G-GE and 7941G/41G-GE provide
the following maximum MOS LQK score under normal conditions with no frame loss:
•
•
G.711 gives 4.5
G.729 A /AB gives 3.7
MOS LQK Version
Version of the Cisco proprietary algorithm used to calculate MOS LQK scores.
Cumulative Conceal Ratio
Total number of concealment frames divided by total number of speech frames received
from start of the voice stream.
Interval Conceal Ratio
Ratio of concealment frames to speech frames in preceding 3-second interval of active
speech. If using voice activity detection (VAD), a longer interval might be required to
accumulate 3 seconds of active speech.
Max Conceal Ratio
Conceal Secs
Highest interval concealment ratio from start of the voice stream.
Number of seconds that have concealment events (lost frames) from the start of the voice
stream (includes severely concealed seconds).
Severely Conceal Secs
Latency1
Number of seconds that have more than 5 percent concealment events (lost frames) from
the start of the voice stream.
Estimate of the network latency, expressed in milliseconds. Represents a running average
of the round-trip delay, measured when RTCP receiver report blocks are received.
Max Jitter
Maximum value of instantaneous jitter, in milliseconds.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Table 8-5
Streaming Statistics Area Items (continued)
Item
Description
Sender Size
Sender Reports Received1
RTP packet size, in milliseconds, for the transmitted stream.
Number of times RTCP Sender Reports have been received.
Last time at which an RTCP Sender Report was received.
Sender Report Time
Received1
Rcvr Size
RTP packet size, in milliseconds, for the received stream.
RTP packets received from network but discarded from jitter buffers.
Number of times RTCP Receiver Reports have been received.
Rcvr Discarded
Rcvr Reports Received1
Voice Quality Metrics
MOS LQK
Score that is an objective estimate of the mean opinion score (MOS) for listening quality
(LQK) that rates from 5 (excellent) to 1 (bad). This score is based on audible concealment
events due to frame loss in the preceding 8-second interval of the voice stream. For more
information, see Monitoring the Voice Quality of Calls, page 9-15.
The MOS LQK score can vary based on the type of codec that the Cisco Unified IP Phone
uses.
Avg MOS LQK
Min MOS LQK
Max MOS LQK
Average MOS LQK score observed for the entire voice stream.
Lowest MOS LQK score observed from start of the voice stream.
Baseline or highest MOS LQK score observed from start of the voice stream.
These codecs for the Cisco Unified IP Phones 7962G and 7942G provide the following
maximum MOS LQK score under normal conditions with no frame loss:
•
•
•
•
G.711 gives 4.5
G.722 gives 4.5
G.728/iLBC gives 3.9
G.729 A/AB gives 3.8
These codecs for the Cisco Unified IP Phones 7961G/G-GE and 7941G/G-GE provide the
following maximum MOS LQK score under normal conditions with no frame loss:
•
•
G.711 gives 4.5
G.729 A /AB gives 3.7
MOS LQK Version
Version of the Cisco proprietary algorithm used to calculate MOS LQK scores.
Cmltve Conceal Ratio
Total number of concealment frames divided by total number of speech frames received
from start of the voice stream.
Interval Conceal Ratio
Ratio of concealment frames to speech frames in preceding 3-second interval of active
speech. If using voice activity detection (VAD), a longer interval might be required to
accumulate 3 seconds of active speech.
Max Conceal Ratio
Conceal Secs
Highest interval concealment ratio from start of the voice stream.
Number of seconds that have concealment events (lost frames) from the start of the voice
stream (includes severely concealed seconds).
Severely Conceal Secs
Number of seconds that have more than 5 percent concealment events (lost frames) from
the start of the voice stream.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
1. When the RTP Control Protocol is disabled, no data generates for this field and thus displays as 0.
Related Topics
•
•
•
•
Configuring Settings on the Cisco Unified IP Phone chapter
Configuring Features, Templates, Services, and Users chapter
Call Statistics Screen, page 7-13
Monitoring the Voice Quality of Calls, page 9-15
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
8-14
Download from Www.Somanuals.com. All Manuals Search And Download.
|