LCD COLOR TELEVISION
TM150F7U
TM201F7U
OPERATION MANUAL
Please read this manual carefully before operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order to prevent potential danger, please observe the following instructions when installing,
operating and cleaning the product. To ensure your safety and prolong the service life of your LCDTV
product, please read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product
is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for
future reference.
3. Heed all warnings--- All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Attachments---Only use attachments/accessories specified by the manufacturer. Do not use
attachments not recommended by the manufacturer. Use of improper attachments can result in
accidents.
6. Power source---This product is intended to be supplied by a listed power supply indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer
or local power company. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system.
7. Power cord protection ---Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9. Entering of objects and liquids---Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short internal
parts. For the same reason, do not spill water or liquid on the product.
10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
11. Damage requiring service---If any of the following conditions occurs, unplug the power cord from the
AC outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into
the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the operating
instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive
adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
PAGE 1
Download from Www.Somanuals.com. All Manuals Search And Download.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any
noticeable abnormality in the product indicates that the product needs servicing.
12. Replacement parts---In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or
other danger.
13. Safety checks---Upon completion of service or repair work, request the service technician to perform
safety checks to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer. This is a safety feature.
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. Do not place the
product on an unstable trolley, stand, tripod or table. Placing the product
on an unstable base can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. When mounting the
product on a wall, be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the manufacturer.
16. Careful move---When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. Sudden stops,
excessive force and uneven floor surfaces can cause the product to fall
from the trolley.
17. Lightning---Unplug this apparatus during lightning storms or when
unused for long periods of time.
For added protection for this television equipment during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage
to the equipment due to lightning and power-line surges.
18. Do not use this apparatus near water---for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
Do not use immediately after moving from a low temperature to high
temperature environment, as this causes condensation, which may
result in fire, electric shock, or other hazards.
19. Clean only with dry cloth---Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
20. Ventilation---Do not block any ventilation openings. Install in accordance
with the manufacturer instructions. The vents and other openings in the
cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or
shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer’s instructions are followed.
21.Heat sources---Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
22.Panel protection---The LCD panel used in this product is made of glass.
PAGE 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Therefore, it can break when the product is dropped or impacted upon by
other objects. Be careful not to be injured by broken glass pieces in case
the LCD panel breaks.
23.Pixel defect---The LCD panel is a very high technology product, giving
you finely detailed pictures. Occasionally, a few non-active pixels may
appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
mportant Safety Instructions
Using the Remote Control
●Use the remote control by pointing it towards the remote sensor window
of the set. Objects between the remote control and sensor window may
prevent proper operation. Cautions regarding use of remote control
Note: the illustration is for your reference only, the remote sensor may
locate differently with different model.
Cautions regarding use of remote control
● Do not expose the remote control to shock. In addition, do not expose the remote control to
liquids, and do not place in an area with high humidity.
● Do not install or place the remote control under direct sunlight. The heat may cause
deformation of the unit.
●The remote control may not work properly if the remote sensor window of the main unit is under
direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or
operate the remote control closer to the remote sensor window.
Batteries for Remote Control
S
If the remote control fails to operate the LCDTV functions, replace the batteries in the remote control.
1 Open the battery cover.
2 Insert two size-AAA batteries.
3 Replace the cover and slide in
reverse until the lock snaps.
● Slide the cover while pressing ● Place the batteries with their
down.
terminals corresponding to the (+)
and (-) indications in the battery
compartment.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
● Place batteries with their terminals corresponding to the (+) and (–) indications.
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
● Different types of batteries have different characteristics. Do not mix batteries of different types.
● Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
● Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a
rash. If chemical leakage is found, wipe with a cloth.
● The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
PACKING LIST
LCD TV
1
Operation Manual
Power Adapter
1
1(only TM150F7U)
AC Power Cable
Infrared Remote Control
1
1
Note:
Please keep the wrapping box and the padding well for future convenient use when
you convey them.
GENERAL INFORMATION
„
„
Radio Frequency input: it can store 181 TV channels
AV input: Convenient for watching a DVD player, VCE, video camera or other playback
devices.
„
„
„
„
S-Video input: Convenient of receiving a high quality component signal from a DVD
player
YPbPr input: Capable of receiving the high definition YPbPr signal in 480i, 480P, 576i,
576P, 720P (50/60Hz), 1080i (50/60Hz),and 1080P (50/60Hz) formats
MTS Stereo Decoding Function: Capable of identifying MTS automatically and
reproducing high quality stereo sound.
VGA input:
a. Convenient to connect with the host computer
b. Use as the display terminal
c. Connect the 3.5mm(diameter) audio jack to your computer’s soundcard to listen to
stereo sound transmitted from your home computer
Program & Child Lock: Capable of locking any program of the TV and the function
button of the front panel
„
„
Timer function
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
„
„
„
Blue background with noise reduction: In TV/AV S-VIDEO and YPbPr modes,
screen displays soft blue background if there is no signal input
Multi Language On-Screen Display menu: Text and graphical user interface makes
menu operation user-friendly
Power Energy Saving Mode (Power management mode): When used as PC display
terminal without PC signal output, the LCD TV will automatically power off within 30
seconds and enter into the Power Energy Saving Mode. It will automatically work again
when it received a signal from the PC. To start the TV manually with no signal press the
number buttons or
/CH+/CH- on the remote control.
„
Plug and Play: No additional software is needed when the product is used as computer
terminal display
„
„
„
„
„
„
„
„
„
Automatic picture quality automatically
Zoom mode: Full-screen, 16:9, film, subtitle
Low power consumption
Picture enhancement function
High definition display panel
Dynamic comb filter
Headphone output
CCD Function
MACROVISION auto identification function
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BRIEF INTRODUCTION
Front Panel
The button names and functions are as follows:
Panel buttons
Button
Description
To switch between TV, AV, S-Video,YPbPr, and PC signal sources.
The same function to【SOURCE】on R/C in menu operation.
To enter or quit from the OSD (On-Screen Display) menu.
The same function to【MENU】on R/C
【SOURCE】
【MENU】
【VOL-】
To decrease the sound volume. Adjust functions in menu operation. The same
function to【Vol-】on R/C
To increase the sound volume. Adjust functions in menu operation. The same
function to【Vol+】on R/C
【VOL+】
1. In TV mode, decrease the channel number
2. To select functions in menu operation.
【CH-】
【CH+】
3. The same function to【CH-】on R/C
1. In TV mode, increase the channel number
2.To select functions in menu operation.
3.The same function to【CH+】on R/C
To power on or put the LCD TV to STANDBY
【
】
The same function to【
】on R/C
Note:
In this operation manual, 【】symbol means Button.
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
AC IN(only for W170F7U/TM201F7U)
HEADPHONE OUTPUT
Amplificatory Illustration of Signal Input Ports
TM150F7U
W170F7U,TM201F7U
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Screen Size Mode Selection
Power On/Off
Recall
Channel Number
Signal Source Selection
Picture Mode Selection
Invalid Button
Sound Mode Selection
Invalid Button
On-screen Menu
Channel Up
Enter
Volume Up
Volume Down
Channel Down
Name the programs in Menu mode
Display
Sleep Timer
Sound Mute
Picture Still
Scan
CCD
MTS
Favorite
Invalid Buttons
PIP Channel Up
Location
PIP Swap
PIP Source Selection
PIP Still
PIP Size
PIP On/Off
PIP Channel Down
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated
location.
2. Connect the output terminal of RF cable to the corresponding TV RF signal input
terminal. The LCD TV is a high-tech digital product, Do use quality RF cable to obtain
optimal results.
3. Connect the output terminal of the AV devices such as YPbPr, DVD to the corresponding
terminal of your LCD TV.
4. Connect one end of the VGA terminal to the corresponding terminal of the host computer,
and connect the other end to the corresponding LCD TV terminal. Screw down the
screws on both sides in clockwise to secure it.
Caution:
When connecting, plug directly and lightly to the interface, otherwise you will
damage the stitches.
5. Ensure that every AV signal cord is correctly connected to the corresponding jack .
6. Put the DC power plug in the DC input outlet of the TV, then put the AC power plug of the
power adapter in the AC power outlet.
7. The panel can be tilted upwards by no more than 100 to achieve better visual angle.
When doing so, so rotate the TV with two hands, one to fix the pedestal while the other to
tilt the panel. Take great care and do this in a moderate pressure in case any
accidents happen.
GENERAL OPERATION
To Turn the TV On
After the power is on, this TV will enter into Standby mode. Then press【
remote control or the front panel to enter into the TV mode
To Turn the TV Off
】on the
1. Press【 】on the remote control or the front panel to turn the TV transitorily off.
2. Simply unplugged the DC power pin of power adapter , then unplug the AC power pin of
that from the AC power supply to turn the TV off completely.
Caution: The TV will be shut off automatically when the power trips. Do unplug the
power adapter from the AC outlet if so. The last TV mode will appear when
power resumes
Please do not turn on/off the TV too often!
Please unplug the power adapter from the AC outlet in time when the power
is suddenly off!
PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION INTRODUCTION
MENU OPERATION
1. Use the On Screen Display menu to set and adjust functions
2. Use 【CH+】/【CH-】 to select the desired menu after pressing 【MENU】, then press
【Vol+】【/ OK】to enter the next submenu; Use【Vol +】【/ Vol -】to select the menu options
and return to the precious menu by pressing 【MENU】again. The menu will auto
disappear without any operation within 10 seconds.
In TV、AV、S-VIDEO、YPbPr and PC modes
ⅠPicture
● Brightness
To adjust the picture’s brightness
● Contrast
To adjust the picture’s contrast.
● Sharpness
To adjust the picture’s definition.
● Colour
To adjust the picture’s color.
● Tint
To adjust the picture’s tint.
Note: Picture menu options in other signal sources:
AV/S-VIDEO: the same as in TV mode
YPbPr/PC: only two options of Brightness and Contrast
ⅡSound
● Volume
To increase or decrease the volume.
● Balance
To balance the volume between the left and right
speakers.
● Woofer
To turn on/off the woofer.
● Spatial
To turn on/off the surround
● Equalizer (submenu)
Use 【OK】/【Vol+】 to enter the Equalizer
(submenu), you can increase or decrease the value
of the sound output in every frequency band which
are preferred
Note: The Sound menu options are the same in TV
PAGE 10
Download from Www.Somanuals.com. All Manuals Search And Download.
signal as well as in other signal sources
ⅢSetup
● Language
To select the different language displayed
● Parent
In the submenu of Parent, firstly the Access Code
menu appears, you will see this menu when you
switch to a channel after it was locked once :
When Enter the Parent menu only two options of TV Rating and MPAA Rating appear on
display, see it below.
TV Rating
Used to block some programs
(eroticism 、violence) , select different Rating with
【CH+】/【CH-】, and select the desired option
among FV,D,L,S,V with 【Vol+】/【Vol -】，U
indicates Unblocked, and B indicates Blocked. To
amend the value with【OK】,and return to the
previous menu with 【MENU】, see it right:
MPAA Rating Used to block some programs
(eroticism 、violence) , select the desired option
among G,PG,PG-13,R,NC-17,X with 【CH+ 】/
【CH-】，U indicates Unblocked, and B indicates
Blocked. To amend the value with 【Vol+ 】/
【Vol- 】,to return to the previous menu with
【MENU】, see it right:
Note: After a program has been set to B Rating in TV RATING and MPAA RATING, this TV
would filtrate that contents if TV programs belong to the rating or superior to that.
PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
●Program Lock
Input the default password of 1235,the submenu
of Parent will be on display if the password is
correct.
(a) When changing the password, the changed
password will be updated after four digits are input.
The word“ok” will appear after you make sure
inputting the same number for twice, otherwise ,
the word “Failed” will appear if two passwords are different.
（b）Unlock all the locked programs when Clear All is operated.
（c）When switch to some locked channels after you exit from the Program Lock menu, the
picture and sound will be locked unless you input the correct password. The unlocked status
will remain until the TV is turned off. Password must be re-keyed after switching on the TV to
the locked channels again.
(d) if any program was locked before, Input the correct password to enter the Auto Search
submenu. Operating Auto Search will cancel the current locked status.
（e）The default password is always effectual.
（f）Entering the default password allows you to go to the Program Lock menu, then change
the password while the default password is still effective. The branch menu cannot be
entered if a wrong password was keyed in, therefore the previous menu needs to be
reverted by pressing 【MENU】
（g）There will be some delays when you are processing functions of Lock All and Clear All.
● Child Lock
In Child Lock On mode, local keys on TV do not work. A prompt ”Keyboard Locked” will be
displayed. However, the remote control buttons will still function. When pressing 【 】 on
the front panel to enter into the TV mode and the Child Lock is on, a prompt ”Locked, power
off after 6s” will appear, using the remote control can solve this. Otherwise, It will
automatically enter into Standby mode. .
Ⅳ Tune
Press 【CH+】/【CH-】to enter the Tune menu
after the main menu is on screen, There are
altogether 5 items for you to adjust such as
Program 、Add/Erase 、Antenna、Auto Search and
Name.
● Program
To Present the current program number.
● Add/Erase
To erase or add the channel..
PAGE 12
Download from Www.Somanuals.com. All Manuals Search And Download.
● Antenna
.To display the RF antenna mode, when this mode is Air, Auto Search begins searching
from channel 2 to channel 69; When this mode is Cable, Auto Search begins from channel
1 to channel 125. Then what have searched before would be stored in the corresponding
EEPROM, meanwhile, the channels which have not been searched will be set to Erase
mode automatically.
● Auto search
Three situations for Auto Search to stop:
1. The TV does auto search and stores programs .
2. 68-program or 125-program positions are all occupied
3. you want to stop it by pressing 【MENU】/【Vol-】 during the search process.
After the situation 3 happened, the search will automatically stop and back to the first
channel, furthermore , the TV would return to the Tune menu.
● Name
Rename the program with four colored buttons on the remote control
【Red】for Capitalized English letters
【Green】for Alphanumeric numbers from 0 to 9
【Yellow】for special characters as “#”
【Blue】Resuming “*” in unnamed mode
Use【V+】/【V-】to input and select the characters
Note: There is a PC Setup menu for the Tune menu in PC signal source; There is no Tune
menu in AV、S－Video、YPbPr signal source.
Ⅴ Clock
● Clock
The current actual time can be input by pressing
the number buttons(0-9) and 【Vol+】/【Vol -】.
● Antenna
To display RF antenna mode.
● Time/ Off Time
The function of can be effectual only when Time/
Off Time is not off. Press the number buttons and 【Vol+】/【Vol-】to adjust the time.
Press【CH+】/【CH-】to select these options in Clock such as Time、Channel、Off Time
in cycle, Press【Vol+】/【Vol-】to set the corresponding value.
1 Whenever the main power is on, the clock item always displays “12:00AM”，only use
【Vol+】【/ Vol-】to switch between AM and PM and use numeric buttons to modify the time.
2.To set Time/Off Time among Off/Once/Always with 【Vol+】/【Vol-】in cycle. Off
indicates this function is not available. Once indicates one time for On Mode, after then it
would be adjusted to Off automatically.
3.This function can only be available when the main power supply is proper, otherwise,
it can not be done and automatically adjusted to Off.
4. Of Clock、Time and Off Time,“Minute”ranges from 00 to 59，“Hour”is 1～12（AM），
PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
1～12（PM）.When“Hour”turns to “--” “Minute”also turns to “--” accordingly, the
function of Clock stops.
● Channel
Select the Channel in Air from 2 to 69 or Cable from 1 to 125 by pressing【Vol+】【/ Vol-】
circularly or numeric buttons directly; Select the items circularly by pressing 【CH+】【/ CH-】.
1.When TV is on, it turns directly to the preset channel if the preset Time is on; When
TV is in standby mode, it firstly turns on and then goes to the preset channel If the
preset Time is on.
2.When the TV is on , if the value of On Time and Off Time are the same, only Off Time
is valid; When the TV is off, if the value of On Time and Off Time are the same, only On
Time is valid,
3.Restart the TV after shutting off the main power, all settings are to be initialized; Turn
off the TV using the remote control, all settings are to be saved.
Note: Only in standby mode can this TV be turned on automatically. The Clock menu in
other signal sources is the same to that in TV mode.
Ⅵ PC Setup
● H Position
To adjust picture’s start horizontally.
● V Position
To adjust picture’s start vertically.
● Clock
To adjust pictures’ sampling clock .
● Phase
To adjust pictures’ sampling phase
● Colour Temp
Four modes of Warm、Normal、Cool And User to choose with 【Vol+】/【Vol-】in cycle.
Only in User mode can adjustments be made to the three options: User Red、User Green
and User Blue.
● Auto Adjust
To adjust the picture’s start 、clock、phase and color temper to the appropriate value
(invalid in DOS mode).
Note: The PC Setup menu is only available in the PC signal source.
OTHER FUNCTIONS
● Volume Control
1. Press【Vol+】 /【Vol-】to increase or decrease the volume when there is no menu on the
screen. The Volume menu will be auto off if there is no operation about 6 seconds.
2. Press【MUTE】on the remote control to turn On/Off the MUTE mode. In Mute mode, a
sign of“MUTE” in red will appear on the upper-right corner of the screen. This sign is
hidden when the menu operation is entered, but the feature is still valid. It appears again
PAGE 14
Download from Www.Somanuals.com. All Manuals Search And Download.
when the menu operation is exited. When there is no valid signal input, the TV will be mute
(but no mute sign)
3. MTS
① Capable of identifying MTS automatically with the control status: the TV would
memorize SAP after it is auto identified: the TV would memorize Stereo after it is auto
identified;
② There is an OSD hint to show the changes in broadcasting signals:
③ Press 【MTS】to switch between Stereo /SAP
SAP
Stereo
Mono
4. Sound Mode Selection
Press 【SOUND】to select Personal、News、Theater and Music modes and activate the
Sound Mode. TV will enter into the Personal mode as you want to alter the concerned
options of the Sound Menu in any mode.
Sound Mode
Personal
News
Sound Quality
For the user’s preference
For general programs of conversations and news report
For better audience effect as soft、magnificent and vivid
For general music programs
Theater
Music
Note: The operation and setting of the Volume Control are applicable to all the signal
sources.
a) Picture Mode Selection
Press【PIC】to Switch among Personal, Soft, Normal and Rich modes.
Picture Mode
Personal
Soft
Picture Quality
For the user’s preference
For more mellow pictures
For general programs
Normal
Rich
For better visual effect such as magnificent and vivid
Note: The setting of this selection is applicable to all the signal sources.
PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
● CCD
Press 【CC】to see this menu, you can select
the desired option among CC1~CC4、T1~T4 and
OFF with 【CH+】/【CH-】, and confirm that by
pressing【OK】
.● Favorites
Press 【FAVOR】to see this menu on the right,
these are the details:
1. Mode：including Auto and Manual. They are respectively stored in Air or Cable way；
2. In Auto mode，the TV would store the available channel name input with the numeric
buttons to Favorite Channels every time orderly, what is more, it only save the latest five
channel names of availability (without repeat);
3. In Manual mode，select different Sort with【CH+】【/ CH-】, then you can channel of each
sort by【CH+】【/ CH-】or number buttons( in Air way, 2-69 are available; in Cable way, 1-125
are available).
In Auto mode，【Vol+】/【Vol-】are invalid while 【CH+】/【CH-】and【OK】can still work.
● Recall
In TV mode, press【RECALL】on the remote control to view the previous channel .
In other signal sources, press【RECALL】on the remote control to view the previous signal
source.
● Signal Switch
Press【SOURCE】on the remote control to display the source menu and select the signal
source. They are TV、AV、S-VIDEO、YPbPr and PC. Press【CH+】/【CH-】to select the
different signal source; Press 【Vol+】/【OK】to enter into the selected signal source; Press
【SOURCE】again to remove the source menu.
● Channel Switch
Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】
on the panel or the remote control to increase/decrease the channel number. If a channel
number is in Skip On mode, the next channel will display orderly.
A maximum of 3 digits can be keyed in at one time with the number button on the remote
control. The symbol of “- -” on the upper-right corner represents tens and one
respectively.. ,two digits are only admitted if a number input is beyond the range and the
number for hundred digit is bigger than “2”.The first input number is for hundreds, if it is
“1”,“1- -”appears on. The TV will switch to channel 1 if no number is input in 3 seconds.
The second is for tens if it is “2”,“12 -”appears on. The TV will switch to channel 12 if no
number is input in 3 seconds and the third is for ones., Press 【OK】to turn to the desired
channel quickly after the corresponding number is input.
PAGE 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: This function is only available in TV mode
● Sleep Function
SLEEP 30
Press【SLEEP】on the remote control once to
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This will be reflected
in the top right corner of the screen. After this step
is done, press 【SLEEP】 to view the set sleep.
See the illustration in the right.
● Indicator Light
Status
Light Colour
Off
Description
On/Off
The TV works normally/is power off
In Standby Mode
Standby
Red
Timer On/Off Or Sleep
Sleep (PC)
Green
Yellow
Timer On/Off is valid or Sleep is on
Sleep for power-saving;
Receives signal from the
remote control
The indicator will flicker when the TV
receives signal from the remote control
Flickering
PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before calling a technician, please check the following table to see if the below
mentioned symptoms can be diagnosed and fixed.
Symptoms
Possible Reasons
Correction
1.The power adapter is not plugged
in
2.The power is off
No picture, no sound,
and no indicator light on
1.Plug the power adapter in
2.Turn the power on
No picture, no sound,
but the yellow light
indicator
Functions of On Time have been set
Press【
】to turn on the TV
1.Adjust
the value of Contrast,
1.Contrast, sharpness, and color are
set improperly
2.Color system is set improperly
3.Sound system is set improperly
sharpness, and color
2.Set the Color system to the country
broadcasting standard
3.Set the Sound system to the country
broadcasting standard
Picture and sound with
abnormity
Signal source is low-grade ;
The signal is in a lower quality;
No signal input
Picture is spotted or with
snow
Use the qualified signal cord
Input the signal
Blue background in AV
mode
No Video signal or the signal cord is
improperly/not connected
Connect the signal cord properly
Adjust automatically by selecting Auto
Adjust or adjust Clock 、 Phase、H
Position and V Position manually after
enter into the PC Setup menu to solve
this problem
Picture is unclear, or
moves or have black
stripes on horizontal
position in PC mode
Picture is not well adjusted
Picture is not well adjusted
Adjust pictures automatically by
resetting H Position、V Position、
Phase and Clock
PC Picture is not in the
middle of the screen
1.Connect the audio signal cord
properly
2.Set the sound system properly
1.Make sure the positive and the
negative polarities are correct.
No Audio signal or the signal cord is
improperly/not connected
No sound
The remote control does Batteries are improperly installed or 2.Check if there is loose contact
not work
exhausted
between the springs and the
batteries.
3.Replace the batteries
PAGE 18
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
TM150F7U
Items
Specifications
Size (diagonal)
15.0 inch
Brightness:250cd/m2
Contrast:400:1
Angle of View:1200(H)/1000(V)
Speed Response:16ms
Lamp Life:50,000 Hours
Recommended Resolution
Pixel Pitch
LCD
items
panel
1024X768
0.297mm(H) X0.297mm (V)
Number of Dots
1024XRGBX768
Viewable Area
304.1mm(H) x228.1mm (V)
Color Display
16.7million
Color System
Sound System
NTSC
M
PC Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV-Audio Input
VGA/SVGA/XGA
480i, 480P, 576i, 576P, 720P, 1080i,1080P (50/60Hz)
2x2.0 W
One way(S-Video is using in community)
AV-Video Input
One way
Headphone Output
Comb Filter
One way
YES
S-Video Input
One way
YPbPr Input
One way (with audio input)
One way
VGA Video Input
VGA Audio Input
One way
DC Voltage Input
DC 12V
Power Adaptor Voltage Input
Rated Power Consumption
Standby Power Consumption
Unit Dimension
Please refer to the back panel of the unit
≤1.5W(with power adapter)
454mm（W）×343mm(H)×166mm(D)
Net Weight
4.5kg(Approx.)
PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
W170F7U
Items
Specifications
Size (diagonal)
17.1 inch
High Brightness
High Contrast
Wide Angle of View
High Speed Response
Long Lamp Life
LCD Panel
Recommended Resolution
1280X768
Pixel Pitch
0.291mm(H) X0.291mm (V)
1280XRGBX768
372.48mm(H) x223.488mm (V)
16.7million
Number of Dots
Viewable Area
Colour Display
Colour System
Sound System
NTSC
M
PC Qualified Input Format
YPbPr Input Format
VGA/SVGA/XGA/WXGA
480i, 480P, 576i, 576P, 720P, 1080i, 1080P(50HZ、
60HZ)
Audio Output Consumption
AV-Audio Input
2x2.0W
One way(S-Video is using in community)
AV-Video Input
One way
Headphone Output
PAL/NTSC Digital Comb Filter
S-Video Input
One way
YES
One way
YPbPr Input
One way(with audio input)
One way
VGA Video Input
VGA Audio Input
One way
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤1.5W
525mm（W）×350mm(H)×230mm(D)
（including the pedestal）
Unit Dimension
Unit Weight
7.5kg(Approx.)
PAGE 20
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
TM201F7U
Items
Specifications
Size (diagonal)
20.1 inch
High Brightness
High Contrast
Wide Angle of View
High Speed Response
Long Lamp Life
LCD Panel
Recommended Resolution
640X480
Pixel Pitch
Number of Dots
0.6375mm(H) X0.6375mm (V)
640XRGBX480
408mm(H) x306mm (V)
16.7million
Viewable Area
Colour Display
Colour System
NTSC
Sound System
M
PC Qualified Input Format
VGA/SVGA
480i, 480P, 576i, 576P, 720P, 1080i, 1080P(50Hz、
60Hz)
YPbPr Input Format
Audio Output Consumption
AV-Audio Input
2x2.0w
One way(S-Video is using in community)
AV-Video Input
One way
Earphone Output
One way
PAL/NTSC Digital Comb Filter
S-Video Input
YES
One way
YPbPr Input
One way(with audio input)
One way
VGA Video Input
VGA Audio Input
One way
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤1.5W
590mm（W）×435mm(H)×230mm(D)
（including the pedestal）
Unit Dimension
Unit Weight
10kg(Approx.)
PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
All the features and specifications are subject to change without notice for improvement.
TM150F7U /TM201F7U
JUJ6.491.1114
PAGE 22
Download from Www.Somanuals.com. All Manuals Search And Download.
|