INFANT BASSINET
IN STRUC TIO N
MANUAL
¤
¤
¤
Do not use this bassinet until
you read and understand these
instructions!
English PM-0474AC 6/97
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING S
❃ DO NOT carry Bassinet with
baby in it. Baby could fall out
or be dropped and be seriously
injured.
❃DANGER! Do not use as a car bed!
Infant could be seriously injured
or killed.
❃ DO NOT remove Bassinet
from stand with baby in it.
Baby could fall out and be
seriously injured.
❃ Never leave baby unattended.
Always keep baby in view, even
when sleeping.
❃ DO NOT attach or place toys
with strings in or around
Bassinet. Strings can cause
strangulation or choking.
❃ Do not use if baby’s weight exceeds
18 lbs. (8.2 kg.) or if baby can crawl
or sit unassisted. Baby could fall out
and be seriously injured.
❃ Keep Bassinet away from
stoves, heaters, campfires,
fireplaces, stairs, open
windows, and other hazards
which can cause injury to
your baby.
❃ Do not push or pull Bassinet across
floors, rugs, etc. with child in it.
Legs will weaken and collapse causing
serious injury.
NEW ILLUSTRATION
❃ Bassinet must be fully assembled
before using.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
A SSEM BLY
❃ Model 10-450 & 10-460 Series Stand
For proper stand assembly, follow the
instructions for your model.
Assembly:
1 Insert cross braces into side of leg with
Large
larger hole and secure with screws.
Hole Side
❃ Model 10-440 Series Stand Assembly:
1 Using screws, attach four (4) cross
braces to one set of curved legs.
Do not over tighten screws.
Do not over tighten.
CAUTION: Inserting cross braces
in wrong side of leg (small hole side)
can cause cross braces to break
during use.
Cross
Brace
Cross
Brace
2 Using screws, attach four (4) cross
braces to second curved leg section
with screws.
CAUTION: Make sure cross braces
go into side of leg with larger
hole.
2 Using screws, attach four (4)
cross braces and spacers to
second curved leg section.
Rod
3 Hook one end of rod over
small indentation at end of
cross brace (A).
A
3 With casters on floor, insert
ends of Cradle Support Rod
through holes in top of
Cradle
Support Rod
curved leg section.
4 Hook end of rod over opposite
Rod
B
NOTE: Curved edge of
Cradle Support Rod must be
angled outward as shown.
side of cross brace (B).
Repeat steps 3 & 4 for opposite
end.
4 Screw knobs over ends of
Cradle Support Rod
until knob is tight against legs.
Hand tighten only.
Repeat steps 3 & 4 for second
curved leg section.
5 With casters on floor, insert
ends of Cradle Support
Rod through holes in top of
curved leg section.
Cradle
Support Rod
NOTE: Curved edge of
Cradle Support Rod must be
angled outward as shown.
Make sure rod installed in
steps 3 & 4 remains hooked
on cross braces before
securing cradle supports.
6 Screw knobs over threaded
ends of Cradle Support Rod
until knob is tight against legs.
Hand tighten only.
Repeat steps 5 & 6 for opposite
end.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY c o n tin u e d
❃Basket Assembly For Model 10-450 Only:
❃ Bassinet Assembly continued:
5 Place Bassinet in stand.
NOTE: Bassinet floorboard
must rest on bottom of cradle
support rod.
1 Snap sides of basket over both
bottom cross braces.
6 Snap side skirt straps to top
cross braces.
❃ Bassinet Assembly For All Models:
1 Straighten Bassinet frame legs
until lower curved section of legs
are nested in slots of floorboard.
7 Place mattress pad in Bassinet.
WARNING:
NEVER use Bassinet without
mattress pad as baby could
suffocate.
2 Snap skirt straps over Bassinet frame.
❃ Canopy Assembly For All Models:
1 Push canopy brackets into canopy
mounting brackets.
3 Pull skirt over frame.
NOTE: Be sure canopy
mounting brackets extend
through openings in skirt.
2 Pull canopy down and over back of
Bassinet and secure Velcro® tabs.
4 Snap skirt to floorboard.
To Remove Canopy:
1 Push in tabs on mounting brackets
and pull upward.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLAC EMENT
PARTS
PARTS LIST
PRICE
$ 23.75
PART
A
A. Tubular Curved Leg Section (1)
(10-440 Series) (not shown)
A. Molded Curved Leg Section (1)
(10-450 & 10-460 Series)
23.75
B. Tubular Cross Brace (1)
(10-440 Series) (not shown)
14.75
14.75
B
B. Molded Cross Brace (1)
(10-450 & 10-460 Series)
C. Cross Brace Screws &
Washers (4)
2.00
6.50
4.75
C
D. Cradle Support Rod (1)
D
E. Cradle Support Knobs (2)
E
F. Short Skirt
(10-440 & 10-450 Series)
35.25
40.25
F. Long Skirt
F
(10-460 Series) (not shown)
G
G. Mattress Pad
11.50
19.50
3.00
H. Canopy & Canopy Frame
I. Non-Skid Feet w/Screws & Nuts (4)
H
I
J. Basket
9.75
(10-450 Series only)
J
K. Instructions & Parts Order Form (not shown)
Free
Add-On Chart
Shipping & Handling Chart
Sales Tax Chart
$ 2.00 = AK, HI, PR, VI, Guam (Air Mail)
$ 5.00 = Canada (Air Mail)
$
$
.01 to $ 5.00 = $ 4.00
5.01 to $ 50.00 = $ 5.00
ARKANSAS Residents Add 6.5% Sales Tax
CALIFORNIA Residents Add 8.25% Sales Tax
OHIO Residents Add 5.75% Sales Tax
5
$10.00 = Mexico (Air Mail)
All others, call for quote
$ 50.01 to $200.00 = 10% of Order Total
$201.00 and over = 5% of Order Total
Download from Www.Somanuals.com. All Manuals Search And Download.
¤
• Model 10-440 Series:
- Tubular Frame
- Short Skirt
- Ball Casters
¤
• Model 10-450 Series:
- Molded Frame
- Short Skirt
¤
- Basket
- Deluxe Casters
• Model 10-460 Series:
- Molded Frame
- Long Skirt
- Deluxe Casters
REPLAC EMENT PARTS O RDER FO RM
Please fill out and return this form to address shown on back of page.
A. Tubular Curved Leg Section (1)
$
$
$
$
**IM P O RTA N T**
(10-440 Series)
A. Molded Curved Leg Section (1)
(10-450 & 10-460 Series)
B. Tubular Cross Brace (1) & Spacers (2)
(10-440 Series)
B. Molded Cross Brace (1)
(10-450 & 10-460 Series)
C. Cross Brace Screws & Washers (4)
D. Cradle Support Rod
E. Cradle Support Knobs (2)
F. Short Skirt
(10-440 & 10-450 Series)
F. Long Skirt
(10-460 Series)
G. Mattress Pad
H. Canopy & Canopy Frame
I. Non-Skid Feet w/Screws & Nuts (4)
J. Basket
(10-450 Series Only)
K. Instructions & Parts Form
We must have this information to process your order.
See label on Bassinet floorboard.
Model Number:
Manufacturer Date:
$
$
$
$
Charge to credit card
Card Number:
Visa
MasterCard
$
Expiration Date:
Cardholder’s Name:
Check Enclosed
$
$
$
$
Please make checks payable in U.S. currency to:
Century Products Company
F R E E
SHIP TO:
Subtotal Amount
$
$
$
$
$
Customer Name:
Sales Tax (see chart page 5)
Shipping & Handling (see chart page 5)
Outside USA (see add-on chart page 5)
Total Amount of Order
Street Address:
City, State, Zip:
Area Code:
Telephone Number:
PM-0474AC 6/97
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Send order with check, money order, or charge card number,
in an envelope to:
Century Products Company
9600 Valley View Road
Macedonia, OH 44056-2096
Attention: Consumer Relations Department
You put more than your trust in us.™
Download from Www.Somanuals.com. All Manuals Search And Download.
|