Celestron Digital Camera 72212 User Manual

Digital Camera Specifications  
Image sensor  
2.0 Mega pixels, CMOS sensor  
Lens  
300mm(8X)  
Field of View  
Image Resolution  
(Still Image)  
7 -8  
HI -2048x1536 (3.1)  
MI -1600x1200 (2.0)  
LO -640x480 (0.3)  
320x240, 12 Fps AVI format  
HI 36 P  
Video Resolution  
Image Capacity  
MI 46 P  
LO 250 P  
(*Upon 16MB Flash Memory)  
MPEG format  
Image Type  
Video measure  
Digital Zoom  
Exposure  
6~8 min  
4 X  
Auto / Manual Mode  
Auto  
White Balance  
Memory  
Built-in 16MB Flash Memory  
SD/MMC card socket expandable  
0 / 105  
LCD open angle  
Language select  
Interface  
English  
USB 1.1  
TV-out  
NTSC / PAL  
Power Source  
1.5V AAA alkaline battery x 4  
Binocular specifications  
Size  
8 x 32 mm  
Field of View  
Field of View5.6°Field of view :  
92.7m(304 ft) at 914m(1000 YDS)  
4.0 mm  
Exit pupil  
Close Focusing  
Eye Relief  
Coatings  
3.5 m  
12.5 mm  
Multi coating on the first surface.  
Single layer for other surface, fully coated.  
8x32  
Package Contents  
Binocular & Digital Camera  
USB Cable  
User Guide  
Video Cable  
Software CD  
Pouch  
x 1  
x 1  
x 1  
x 1  
x1  
Model #72212  
Binocular Dimensions 156mm x 102mm x 60mm(LCD Close)  
System Requirements:  
5. CD-ROM  
6. USB port  
7. 600MB of free hard  
disk space.  
1. Window 98/ 98SE/ ME/ 2000/ XP  
2. The processor above Pentium 233MHz  
3. 128MB SDRAM  
4. Video(VGA) card with 2MB of RAM for  
minimum 16-bit (High Color) display.  
U.S. Patent No. 6,088,053. Other patentspending  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions  
Cautions  
Viewing (Movie) recorded images on PC  
1. Use theUSB cable toconnect the USBport from PCto VistaPix.After  
connection the "PC"display on LCD.  
Never immerse VistaPixinto any fluidor liquid.  
Remove dust orstains with asoft cloth dampenedwith water orneutral  
detergent. Keep ina dry andcool dust-free environmentor a container  
when it isnot used.  
2. Double click "MY COMPUTER"  
on the PC'sdesktop.  
3. Double click "Removable Device".  
Take the batteries outwhen VistaPix isnot to beused over along period.  
Avoid dropping theVistaPix. Do notdisassemble VistaPix.  
Warning:  
Avoid using undercombustibility gas environment.  
Do not look at the sun with the Binocular, which will damage the eyes  
even lead to blindness.  
Please take care when using the hanging tape, and do not let children  
twist it around their necks and bodies to avoid danger due to improper  
operation.  
Please don't throw the product with the gallus in hand to avoid damage  
to others or malfunction of the product.  
Keep the product away from babies to prevent them from putting the  
batteries or silica gels into their mouths, which causes danger.  
4. Open \DCIM\100scope\  
5. Select thevideo file (*.AVI) and  
double click it, the images video  
will play through"Windows Media  
Player" software orother software.  
Usage of thebattery  
Please always use Alkaline Battery (AAA Alkaline Battery)  
Please take out the batteries and keep them separately with the product  
if you'll not use the product for a long time.  
About usage  
Do Not placethe product underthe following environmentsto avoid any  
damage.  
o
1.Places in temperaturehigher that 70C  
2.Damp or dustyplaces  
3.Places with strongelectromagnetic field.  
In order touse Windows MediaPlayer to viewthe videoAVI filetaken with  
your VistaPix, thecomputer viewing theAVIfile needs tobe running  
Microsoft DirectX version8.0a or later. If youexperience problems viewing  
AVI filesfrom Media Playeryou can upgradeDirectX to themost current  
version by goingto the MicrosoftDirectX Web Pageat:  
Please do not disassemble or repairthe product toavoid malfunction.  
Please do not drop the productto the groundto avoid malfunction.  
Follow the downloadinstructions given onthe web site. The download isfree.  
P.18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steps to download image file  
1.To execute Photo Manager.  
Select the buttons as indicated.  
2.Enter " Removable Disk " to open  
"DCIM" file.  
1
2
3
Contents  
4
1.Introduction......................................................P.1  
2.Notice to user.....................................................................P.2  
3.Product Identification.........................................................P.3  
4.Memory & Image Download.............................................P.4  
5.Using the camera........................................................P.5  
6.How to use the binocular.............................................P.10  
7.System requirements............................................P.11  
8.Basic maintenance..........................................................P.12  
9.Steps to install VistaPix driver.........................................P.13  
10.Steps to install Photo Manager....................................P.15  
11.Steps to download image file........................................P.17  
12.Viewing ( Movie ) recorded images on PC...............P.18  
13.Steps to view TV images..............................................P.19  
3.In " DCIM " file, open"100MEDIA "  
data file.  
4.In " 100MEDIA " Data file, choose the  
pictures you want or choose all Images.  
5
7
6
8
How To Use the PhotoManager  
Select the buttons as indicated. "Help" will give you  
detailed information on Photo Manager's many  
features. To learn more about Photo Mangaer you  
can click on the Icon (3) in the lower left side of the  
screen to directly to the PhotoManager web site  
5.Images download finished.  
1
2
3
P.17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steps to install Photo Manager  
8. Choose "Custom" or "Typical"  
form of installation.  
9.Please confirm the file location  
1.Introduction  
VistaPix is a binocular integrated with a digital camera that is great  
for sporting events, concerts and wildlife activities such as hunting or  
bird-watching. VistaPix lets you record memories and sights at the  
touch of abutton. Use the full-featured binocular for closer views and  
capture images to take home with you at the same time.  
VistaPix makes it possible to share your fun with others by  
downloading images from the camera right to your computer  
to e-mail to your friends and family.  
10. Begin installing software  
11.Software installation finished,  
please press "Finish"for  
confirmation  
Battery installation manner  
1. Hold tight the bottom of battery cover, and lift to open.  
2. Install four AAA batteries into the battery compartment as shown below.  
2
After installing VistaPix driver & software. Please restart your computer.  
1
P.16  
P.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steps to install Photo Manager  
1. Insert the CD ROM  
3.Choose the language and press  
confirm button  
2. Select "Install Thalia Photo Manager"  
2.Notice to User  
WARNING !  
Ne ve r us e a Vis t a Pix t o l ook a t t he s un !  
Looking at or near the sun will cause instant and irreversible damage  
to your eye. Eye damage is often painless, so there is no warning to  
the observer that damage has occurred until it is too late. Do not  
point the binocular at or near the sun.  
Children should always have adult supervision while observing.  
4.Enter installing screen  
5.After confirming, please press  
"Next" button  
2-1. When noaction is performedwith your binocular, the VistaPixwill  
automatically turn offafter 90 seconds.  
2-2. The VistaPix has abattery level displayin the right lower corner of  
the LCD. Whenthe battery islow you willhear a long"beep". If no  
action is taken, VistaPix willautomatically turn-off after10 seconds.  
2-3. Please usealkaline battery forthis product.  
2-4. VistaPix comeswith a SDcard slot thatenables you toexpand the  
memory. To install an optionalSD card:  
Open the coverof the SDcard slot andinstall the card(with the  
gold strips facingup) into theSD card slot(7) until itclicks into the  
position.  
7.The serial number is located on the  
front of the CD.Press "Next" when  
complete  
6.After confirming, please press "Yes"  
SD card lidclosed  
SD card lidopened  
Foil face up  
P. 2  
P.15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steps to install VistaPix driver  
3. Product Identification  
5. Computer willautomatically install  
the driver.  
13  
3
1
1. Diopter Knob(on underside)  
2. Center Focus Knob  
3. Objective Lens  
9
5
6
4
7
8
11  
10  
2
6. If yousee the "Microsoftdigital sign"  
request appear onscreen as you  
are installing thedriver , pleasepress  
"Yes" button to continueinstalling.  
4. Power/Menu Button  
5. Shutter/OK Button  
6.Movie/Delete Button  
7. USB Port/SD card slot  
8.TV out port  
3
9
13  
11  
7. Installation complete. Please press  
"Finish" button.  
9. Eyepiece  
10. Camera Lens  
11. LCD Screen  
12. Battery Compartment Lid  
13. Barrel  
12  
After installing VistaPix driver. Please restart your computer.  
P.14  
P.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory & Image Download  
Steps to install VistaPix driver  
1.Before you installthe driver, please make surethat your VistaPixis not  
connected to thecomputer.  
Using SD memorycard  
The VistaPix hasbuilt in flashmemory, sowhen you takeimages, the  
images will besaved into theflash memory insideyour VistaPix until  
the memory is full.  
2.If you have windows ME/ 2000/ XPoperation system installed in your computer,  
you should not need to install the VistaPix driver. Simply view andsave images  
through your My Computer icon.  
Whenever you insertan optional SDmemory card totake images, the  
images taken with theSD card andflash memory arestored separately.  
So when downloading theimages, the internalflash memory andthe  
card memory must bedownloaded separately.  
1. Insert theCD included withyour  
VistaPix.  
Download images  
When downloading the photos, the internal memory and the card memory  
must be downloaded separately.  
2. Click themouse on "Installation  
Driver" to begininstallation.  
Download from flashmemory  
Take out the SDcard (if necessary)and connect theto the computer,  
then follow thedownloading steps andall the photos in the flash  
memory can bedownloaded.  
3. Begin "InstallShieldWizard"  
and your computerwill  
Download from OptionalSD card  
Insert the SDcard and connectthe to thecomputer, thenfollow the  
downloading steps andall the photosin the SDcard memory canbe  
downloaded.  
automatically execute the  
installation of driverprogram.  
(Once the SDcard memory isfull, you canremove the cardand continue  
to use the VistaPix untilthe internal memoryis full as well).  
4. Follow the"InstallShield Wizard"  
steps to guideyou through the  
driver installation.  
Click on "Next"when complete.  
P. 4  
P.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.Using the Camera  
7.Basic maintenance  
Operating Environment: 41o to104 oF(5o to 40o C). 20%-85% relative  
humidity,non-condensing.  
Use this product under good lighting conditions, avoid facing light source  
directly. Rememberto keep a distance of at least 49 feet (15 meters) away  
from the target when taking a photo. As you press the "Shutter/Set" button,  
hold the binocular very steady until you hear a "Beep" sound. If the binocular  
is unsteady,the camera will not focus well and blurred images will result.  
Care of your VistaPix  
7 -1.Never immerseVistaPix into anyfluid or liquid. Remove dust orstains  
4-1 Turnon the powerby pressing  
buttonfor 3 secondsand you willhear  
two beep sounds. The monitor willdisplay picture numberand resolution.  
Press again topower off.  
4-2 Press Up-downbutton  
up to 32xas seen onthe LCD display.  
4-3 Press theShutter button  
you hear abeep sound.  
with a softcloth dampened withwater or neutraldetergent. Keep ina dry  
and cool dust-freeenvironment when notin use.  
7 -2.Take the batteriesout when VistaPixis not tobe used overa long  
period.  
to zoomin and out. It can magnifythe image  
totake pictures. Shootingis completed when  
anda beep soundwill signal thatrecording  
4-4 Press theMovie button  
7 -3. Avoid dropping theVistaPix. Do notdisassemble VistaPix.  
has begun. Thegreen power indicatorlight will blinkwhile recording isin  
progress. Press theMovie button  
againto stop recording.  
Function  
Button  
NO INDICATORS  
5
ITEMS  
1
2
3
4
5
Power /menu  
Movie /delete  
Shutter /OK  
3
2
1
Zoom in/ up  
Zoom out/ down  
4
1
Monitor  
NO INDICATORS  
ITEMS  
Number of Images Remaining  
3
1
2
4
5
Image resolution  
0.3MP,  
2.0MP,  
3.0MP  
3
4
5
6
7
Movie mode  
SD cardmode  
Autoshooting mode  
Battery level  
2
6
7
Memory gauge  
P.12  
P.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(Play back mode)  
Press the Menubutton , select"Play Back" andpress OK button. Use  
6.System requirements  
6-1.Windows 98SE / 2000/ ME / XP  
6-2.Pentium 233MHz or higher  
6-3.128MB SDRAM  
Up-Down button  
toselect the pictures, press OK button  
to display  
the picture infull screen. Pressthe Shutter button again to returnto a menu  
of nine thumbnailimages.  
MEMU  
6-4.Video(VGA) Card with 2MBof RAM for minimum16-bit(High Color)display.  
6-5.CD-ROM  
Play back  
Auto shhutter  
Setting  
6-6.USB port  
Power off  
6-7.600MB of free harddisk space.  
Erasing Pictures  
Press the deletebutton  
is displayed. Select"Erase one" andpress OK Button  
frame. Select "Eraseall" and pressOK button  
while thethumbnail menu orfull-screen image  
to erase asingle  
toerase all frames.  
Installation of driver  
ERASE  
ONE ERASE  
Yes  
No  
ERASE  
ERASE ALL  
Yes  
No  
One erase  
Erase all  
One erase  
Erase all  
Since VistaPix is a Mass Storage Deviceyou can access captured images just as  
if it were a hard drive, therefore nosoftware driver is needed (See Mass Storage  
Mode ).If using VistaPix with an olderversion of Windows 98SE it may be  
necessary to install the software Driver.  
Auto shutter mode(Timer)  
Press the Menubutton and select"Auto Shutter". Pressthe OK button  
again to takean image automaticallyafter 10 seconds.  
MEMU  
A
B
Play back  
Auto shhutter  
Setting  
Power off  
PC with USB port  
VistaPix  
(Setting mode)  
Press the Menubutton  
to enter themenu.  
and select"Setting". Press theOK button again  
MEMU  
Play back  
Auto shhutter  
Setting  
Power off  
P. 6  
P.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. How to use the binocular  
To adjust the eye-relieffor eyeglass wearers:Fold down therubber eyecups  
and place themagainst your glassesto get thebest viewing result.  
Resolution Adjustment  
Select "Resolution" and press OK Button.  
Choose the desired resolution  
and press OK button  
to change the image resolution. Indicates 0.3MP,  
indicates 2.0MP, and  
indicates 3.0MP on theLCD screen.  
SETUP  
RESOLLUTLON  
Resollution  
Exposurre value  
Date//Time  
TV out  
3.0M  
2.0M  
0.3M  
Time sstamp  
Exposure Value  
Select "Exposure value" and press the OK button.  
the exposure setting suggested by the camera. Press the Up or Down button  
to select a value between -1.5 and 1.5 and press OK button to accept the  
Thisallows you to change  
exposure value. Negative exposure values tend to underexpose (darken) your  
object while positive values will overexpose (brighten) the object.  
SETUP  
EV  
EV  
Resollution  
Exposurre value  
Date//Time  
TV out  
0.0  
0.6  
Adjusting the eyepieces  
The distance between your eyes is called interpupillary distance.  
The interpupillary distance is different from oneperson to another.  
It is important to adjust your interpupillary distancebefore using the VistaPix:  
- Hold VistaPix firmly in the normalviewing position.  
- Adjust the barrels bypushing together or pulling apart until you see a single  
circular image with both of your eyes.  
Time sstamp  
Setup the Date  
Select "Date / Time" and press the OK button  
the correct date (y/m/d) and time (h/m/s) by pressing the Up-down button.  
Press the OK button again to complete the setting.  
to set the internal clock. Edit  
SETUP  
Date/Time  
2004 01 31  
24:00:01  
Resollution  
Exposurre value  
Date//Time  
TV out  
Focusing the Binocular  
A. Set the Diopter Knob on undersideof VistaPix to its center pointbetween  
- and + .  
Time sstamp  
B. Choose an object that is atleast 15 meters (49 ft) away.  
C. Looking with just your left eye, rotatethe Center Focus Knob(2) until the object  
you are viewing is in best focus.  
D. Looking with just your right eye,rotate the Diopter Knob(1) until the objectyou  
are viewing is in best focus.  
TV-out Display Mode  
Select "TV out" and press OK button.  
(NTSC for United States or PAL for Europe) and press OK button  
complete setting.  
Choose the corresponding output  
to  
E. Viewing your object with both eyes,turn the Center Focus Knob to bringit in  
best focus.  
SETUP  
TV OUT  
NTSC  
PAL  
Resollution  
Exposurre value  
Date//Time  
TV out  
Time sstamp  
P.10  
P.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time stamp onphoto  
Select "Time stamp" from setting menu,press OK button  
Reset  
,select ON to  
Select "Reset" fromsetting menu, pressOK button  
tomake the selection.  
display time on photo.OFF to skip time on photo.Press OK button  
complete the setting.  
again to  
Select "Yes" to returnthe original factorysetting. Select "No"to retain the  
current settings. PressOK button tocomplete the set-up.  
SETUP  
Time sstamp  
ON  
OFF  
SETUP  
Beep  
Auto poower OFF  
Format  
Reset  
Reset ssetting  
Yes  
No  
Resollution  
Exposurre value  
Date//Time  
TV out  
Time sstamp  
Beep Sound  
Select "Beep" from setting menu. Press OK button  
beep sound.OFF to turn off thebeep sound.Press OK button  
the setting.  
Power Off mode  
Press menu button  
off.  
,select ON to turn on the  
and select "Power off". Press OKbutton.  
to power  
to complete  
SETUP  
Beep  
Auto poower OFF  
Format  
Reset  
Beep SSound  
ON  
OFF  
MEMU  
Play back  
Auto shhutter  
Setting  
Power off  
Auto power  
Auto power allows you to selectthe duration oftime that yourVistaPix can  
be inactive beforeit automatically poweritself down. Select"Auto power OFF"  
from setting menu, press OK button.  
inactivity shutdown. PressOK button  
Select the indicatedtime of autopower  
againto complete theset-up.  
SETUP  
Auto poower OFF  
Beep  
Auto poower OFF  
Format  
90 secconds  
3minutes  
5minutes  
10minnutes  
15minnutes  
Reset  
Formatting  
Select "Format" and press OK button. When you choose "Yes" and press  
Shutter button ,a confirmation screen is displayed. Press OK button  
to start formatting the internal memory. Warning all stored image will be  
erased after formatting is complete.  
SETUP  
Beep  
Auto poower OFF  
Format  
Reset  
FORMAT  
Yes  
No  
Reformat  
Do not poower off  
Yes  
No  
P.8  
P. 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  

BMW Automobile 1985 bmw 635csi User Manual
Bosch Appliances Network Router D6100 User Manual
Braun Electric Toothbrush FG 1000 User Manual
Bryan Boilers Boiler DSH 10 User Manual
Caframo Fan 0 62503 73704 5 User Manual
Campbell Hausfeld Nail Gun NB0030 User Manual
Carcomm Cell Phone Accessories CMPC 15 HTC Himalaya Alpine Qtek 2020 2020i User Manual
Cecilware Water Dispenser NS18A User Manual
Char Broil Gas Grill 463270311 User Manual
Cisco Systems IP Phone 7902G User Manual