ELECTRIC COUNTER TOP
GRIDDLE
OPERATION MANUAL
EL-1624
EL-1636
EL-1624 Shown
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295 ■
718-932-1414
FAX 718-932-7860
NN53A 5/05
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on the purchase of your Cecilware Counter Top Griddle. Please take time to carefully read
through this manual to ensure the machine is operated and maintained properly. This will enable the best
possible performance from the product for many years.
Cecilware will not accept liability for the following if:
* The instructions in this manual have not been followed correctly.
* Non-authorized personnel have tampered with the machine.
* Non-original spare parts are used.
* The machine has not been handled and cleaned correctly.
Packaging
Cecilware prides itself on quality and service, ensuring that at the time of packing all products are supplied fully
functional and free of damage.
Provided in this package are the following:
* Griddle
* Waste Tray
* Manual
Should you find any damage that occurs in transit, please contact your Cecilware dealer immediately.
Installation
Remove the Cecilware Griddle from the packaging. Be certain that all protective plastics and residues are
thoroughly cleaned from its surface.
Place your Cecilware Griddle on a firm level surface; the adjustable feet can assist in leveling.
Local standards and regulations should be consulted in order to abide by standards set in relation to
positioning, spacing, and ventilation. Cecilware recommends that you allow no less than 4” for a ventilation
gap around the perimeter of this unit. Common sense and initiative should be used when choosing position
and operation of this product.
Caution:
Do not position or operate near combustible materials/flammable objects.
Once your Griddle has been placed in position, be sure that the stainless steel waste tray is correctly
positioned.
Supply the appropriate power and connect to source; your Griddle is now ready to turn on and operate. (For
power supply please see technical specification sheet, page 10).
Preparing the cooking surface:
Be sure the cooking surface is clean; then simply turn the unit on and apply a generous amount of oil to the
plates. Using the thermostat, set the grill to 230° F; once the grill has reached that temperature, switch off and
with care wipe the plates clean of excess oil.
Caution the grill and oil will be HOT!!!!!!
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Your Griddle should be turned on prior to usage to allow the cooking surface to warm up; 5 minutes is
sufficient.
To get efficient use from this unit, it is recommended that for intermittent use that the thermostat be turned
down when not cooking. This will assist in reducing power consumption and also allow for quicker heat
response when needed.
Cecilware recommends that the cooking surface is lightly greased before each use.
Turn the thermostat dial towards the "ON" position; the amber pilot light will activate to confirm this. Adjust the
dial to the required setting. As the grill plate fluctuates in temperature, the thermostat will operate to maintain
set temperature; the light will continue to indicate when the elements are heating or have reached the required
temperature.
A temperature setting of between 375ºF and 430ºF will be sufficient for general cooking. This may vary for
particular food types, individual needs, or experience.
Simply place the food products on the grilling surface and cook to your needs.
Cleaning, Care and Maintenance
*Switch off the power and disconnect from the power source.
*The Griddle should be cleaned regularly throughout use, and thoroughly cleaned after each meal period.
Regular cleaning will result in easier cleaning, as the build up will be less. Correct preparation of the cooking
surface when first used, will assist in keeping the plates clean.
*For best results clean the plate while still warm using warm soapy water. A nylon cleaning cloth may be used,
but it is recommended that you avoid scrapers made from steel, wool, as they will damage the plate. Do not
use cold water on warm plates, as buckling effect may occur.
*When scrubbing the plates, do not clean too thoroughly; if you do, you must prepare the cooking surface
again before use.
*Remove waste tray from unit and discard waste; clean in hot soapy water.
*The remainder of the Griddle can be cleaned with a damp cloth using hot, soapy water.
*Warm soapy water is recommended for cleaning; prolonged use of cleaning agents may damage stainless
steel.
* Do not immerse in water.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
*A Cecilware Recommended Qualified Service Technician should carry out repairs if necessary. Do not
remove any components or service panels on this product.
*Allow the Griddle to cool down after use before dismantling for cleaning; the unit will be too hot to handle
immediately after use.
*When cleaning, switch off power and disconnect from the outlet.
*Do not immerse unit in water or use hose to clean.
*If the power cord is damaged, it must be replaced by a Cecilware Recommended Qualified Service
Technician in order to avoid a hazard.
Trouble Shooting
If the Cecilware Griddle does not operate, please check the following before placing a service call.
Top Griddle
Problem
El-1624, EL-1636
Remedy
Cause
1. Mains power supply
1. Check mains power supply
2. Power switch has not been 2. Check the unit is correctly plugged in and
turned on
turned on
3. Replace the fuse in the plug with correctly
rated fuse
3. Fuse in the plug has blown
The unit is not working
and the indicator light is
not on
4. Plug and lead are damaged
5. Internal wiring fault
4. Call service agent or qualified technician
5. Call service agent or qualified technician
6. This is
a
safety device that has
6. Thermal cut-out has activated
1. The indicator bulb has blown
disconnected the power: call a service
agent or qualified technician
The unit is heating but the
indicator light is not on
1. Replace the indicator light: call a service
agent or qualified technician
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting Cont…
Problem
Cause
Remedy
1. Faulty element(s)
1. Call service agent or qualified technician
2. Ensure that the thermostat is set correctly,
also ensure the dial is not spinning on the
thermostat and giving the wrong reading
Indicator light is on but
the unit is not heating
2. Operation of thermostat
3. Faulty thermostat
1. Carbon build up
3. Call service agent or qualified technician
1. Ensure that the plates are kept clean and
free of carbon build up
2. Ensure that the thermostat is set correctly,
also ensure the dial is not spinning on the
thermostat and giving the wrong reading
Slow heat up of the
cooking surfaces
2. Thermostat setting
3. Faulty element(s)
3. Call service agent or qualified technician
Please ensure:
* There is correct power supply.
* Check breaker.
* The machine is plugged in correctly and power is switched on.
* The timer and thermostat are in the correct position.
* The elements are clear of any food particles.
Note: All Cecilware products are tested prior to packing.
Compliance
Cecilware products have undergone strict product testing in order to comply with regulatory standards and
specifications set by international, independent, and federal authorities.
As testimony to such compliance, Cecilware products carry the following marks/symbols:
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Diagram
Model: EL-1624:
240V
on/off
switch
thermostat
pilot light
heating
element
EL-1636:
240V
on/off
switch 1
on/off
switch 2
thermostat 1
thermostat 2
pilot light 1
pilot light 2
heating
element 1
heating
element 2
The above circuit diagram has been provided to assist qualified technicians. A Recommend Qualified Service
Technician should carry out repairs if needed. Do not remove any components or service panels on this
product.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Explosion View
MODEL: EL -1624
1
2
3
4
5
6
13
12
7
14
8
11
10
9
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MODEL:EL – 1636
1
2
3
4
5
6
14
13
12
7
8
11
10
9
Spare Parts List
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EL-1624
EL-1636
QTY
1
Part NO.
QTY
1
Part NO.
No. Description
NA
08035
NA
1
2
GRIDDLE PLATE
HEATING ELEMENT
ELEMENT FIXING PLATE
INSULATION
NA
1
2
08042
NA
3
1
2
4
1
NA
1
NA
5
INSULATION FIXING PLATE
CERAMIC TUBE
CORD AND PLUG
FEET
1
NA
1
NA
6
2
08077
08047
08040
NA
4
08077
08047
08040
NA
7
1
1
8
4
4
9
BASE PLATE
1
2
10
11
12
13
14
THERMOSTAT
DIAL
1
08078
08041
080067
08073
08039
2
08078
08041
08067
08073
08039
1
2
PILOT LIGHT
1
2
ON/OFF SWITCH
DRIP TRAY
1
2
1
1
*NA = not available except by special order.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power
(watts)
Dimensions (inches)
WxDxH
Model
Voltage
Amps
EL-1624
EL-1636
240V
240V
2400
3600
10A
15A
24” x 21 1/8” x 8”
36” x 21 1/8” x 8”
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295 ■
718-932-1414
FAX 718-932-7860
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|