Casio Webcam EX TR350 User Manual
E
Digital Camera  
User’s Guide  
Thank you for purchasing this CASIO product.  
• Before using it, be sure to read the precautions contained in this User’s Guide.  
• Keep the User’s Guide in a safe place for future reference.  
• For the most up-to-date information about this product, visit the official EXILIM  
Website at http://www.exilim.com/  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read this first!  
• The contents of this manual are subject to change without notice.  
• The contents of this manual have been checked at each step of the production  
process. Feel free to contact us if you notice anything that is questionable,  
erroneous, etc.  
• Any copying of the contents of this User’s Guide, either in part or its entirety, is  
forbidden. Except for your own personal use, any other use of the contents of this  
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden  
under copyright laws.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost  
profits suffered by you or any third party due to the use or malfunction of this  
product.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost  
profits, or claims by third parties arising out of the use of EXILIM Remote.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost  
profits caused by loss of memory contents due to malfunction, repair, or any other  
reason.  
• Note that the example screens and product illustrations shown in this User’s Guide  
may differ somewhat from the screens and configuration of the actual camera.  
LCD Panel  
The liquid crystal panel of the monitor screen uses high-precision technology that  
provides a pixel yield in excess of 99.99%. This means that some very small number  
of pixels may not light or may remain lit at all times. This is due to the characteristics  
of the liquid crystal panel, and does not indicate malfunction.  
Take test shots  
Before shooting your final image, shoot a test shot to ensure that the camera is  
recording correctly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Contents  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . . 9  
]\Quick Start Basics  
12  
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Changing the Camera Style to Suit Shooting Conditions . . . . . . . . . . . . . . . . 14  
]
]
]
Opening and Closing the Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Rotating the Monitor Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Camera Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
]
]
Loading the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 25  
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
]
]
]
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Turning Power On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
]
]
Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
]\Recording Images  
38  
Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
]
]
]
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . . .(ART SHOT). . . 40  
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up). . . 42  
Using Motion Shutter to Trigger a Self-timer Operation . . . (Motion Shutter). . . 43  
Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Shooting a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
]\Using BEST SHOT  
50  
Shooting Clearer Snapshots . . . . . . . . . . . . . . . . . . . . . . (Multi SR Zoom) . . 51  
Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . . 52  
Shooting with High Speed Night Scene . . . . . . . . . . . . .(HS Night Scene) . . 53  
Shooting with High Speed Anti Shake . . . . . . . . . . . . . . .(HS Anti Shake) . . 54  
Shooting with Priority on Subject Faces . . . . . . . . . . . (HS Best Selection) . . 54  
Shooting a Panorama Image . . . . . . . . . . . . . . . . . . . . .(Slide Panorama) . . 55  
]\Advanced Recording Settings  
58  
Using the REC Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
]
]
]
]
]
]
]
]
]
]
]
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Touch Shutter). . . 59  
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer). . . 59  
Using the LED Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (LED). . . 60  
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size). . . 61  
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . .(Movie Quality). . . 62  
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift). . . 63  
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance). . . 64  
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 65  
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Focus). . . 66  
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Review). . . 67  
Checking a Snapshot before Saving It . . . . . . . . . . . . . (Self-portrait check). . . 68  
]\Viewing Snapshots and Movies  
69  
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
]
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing). . . 71  
Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
Zooming an On-screen Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
Viewing Snapshots and Movies on a TV Screen. . . . . . . . . . . . . . . . . . . . . . . 74  
]\Other Playback Functions  
(PLAY) 76  
Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
]
]
]
]
]
]
]
]
Performing Paint Operations on an Image . . . . . . . . . . . . . . . . . . . . .(Paint). . . 77  
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow). . . 78  
Extracting an Image from a Snapshot . . . . . . . . . . . . . . . .(Cut out subject). . . 78  
Inserting a Subject into another Snapshot . . . . . . . . . . . . . . (Paste subject). . . 80  
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . . (Protect). . . 81  
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation). . . 82  
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize). . . 82  
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming). . . 83  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
]\Establishing a Wireless LAN Connection  
84  
Wireless LAN Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
Establishing a Connection between a Smartphone and Your Camera . . . . . . 85  
]
]
Installing the EXILIM Remote App on Your Smartphone . . . . . . . . . . . . . . . . . . 85  
Configuring Wireless LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
Using a Smartphone as a Camera Remote Controller . (Remote Capture) . . 86  
Sending a Just-recorded Snapshot to a Smartphone . . . . . . (Quick Send) . . 88  
Sending a Snapshot or Movie File from  
Camera Memory to a Smartphone . . . . . . . . . . . . . . . . . .(Send to phone) . . 89  
Resizing Snapshots before Sending Them to  
a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize before send) . . 90  
Viewing Snapshots and Movies in  
Camera Memory on a Smartphone . . . . . . . . . . . . . . . . (View on phone) . . 91  
]\Printing  
92  
Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92  
]\Using the Camera with a Computer  
94  
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Using the Camera with a Windows Computer. . . . . . . . . . . . . . . . . . . . . . . . . 94  
]
]
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98  
]
]
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 98  
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100  
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
]\Other Settings  
(Set Up) 103  
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) . 103  
Automatically Orienting the Monitor Screen Contents to  
Match Camera Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . .(Auto rotate) . 103  
Resizing Snapshots before Sending Them to  
a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize before send) . 103  
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 104  
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) . 104  
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . 105  
]
]
Setting a Travel Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105  
Selecting the Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105  
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 106  
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 106  
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 107  
Selecting the HDMI Terminal Output Method . . . . . . . . . . . . . . . . .(HDMI) . 107  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Changing the Camera Password for  
Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . . . (WLAN password) . 108  
Displaying a Startup Screen at Power On . . . . . . . . . . . . . . . . . .(Startup) . 108  
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . 109  
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . 109  
]\Appendix  
110  
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117  
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121  
]
]
]
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121  
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123  
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124  
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126  
]
]
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126  
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130  
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 131  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
General Guide  
The numbers in parentheses indicate the pages where each item is explained.  
bo  
7
8
1
2
9
6 5 4 3  
bn bm bl bk  
bq  
bp  
Frame (page 14)  
Speaker  
Shutter button*  
(Self-portrait shutter  
button) (pages 32, 68)  
Lens  
Microphone  
(pages 17, 49)  
LED light (page 60)  
Memory card slot  
(pages 28, 29)  
[HDMI] HDMI output  
(micro) (page 74)  
[CARD HDMI] cover  
(pages 28, 74)  
Back lamp  
(pages 21, 24, 30, 32)  
[p] (Power) (page 30)  
Shutter button*  
(page 32)  
Monitor screen  
(pages 9, 10, 103)  
[USB] port  
(pages 20, 23, 95, 99)  
Strap hole (page 2)  
[BATT.OPEN] button  
(pages 19, 19)  
1
2
3
7
8
9
bk  
bl  
bm  
bn  
bo  
4
5
bp  
bq  
6
* Your camera has two shutter buttons.  
Battery slot (page 19)  
br  
br  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
 
Monitor Screen Contents and How to Change Them  
The monitor screen uses various indicators, icons, and values to keep you informed  
of the camera’s status.  
• The sample screens in this section are intended to show you the locations of all the  
indicators and figures that can appear on the monitor screen in various modes.  
They do not represent screens that actually appear on the camera.  
. Snapshot Recording  
Tab (page 30)  
Focus mode (page 66)  
1
1234567  
2
Self-timer mode (page 59)  
Digital zoom (page 44)  
Snapshot image size (page 61)  
Movie quality (pages 47, 62)  
LED light (page 60)  
Zoom icons (pages 32, 44)  
Quick send icon (page 88)  
“b” Movie icon (pages 33, 47)  
Battery level indicator (page 25)  
Movie capacity (recording time) (page 32)  
Snapshot capacity (number of shots)  
(page 32)  
bs  
br  
bq  
bp  
bo  
3
4
5
6
7
8
9
bk  
bl  
bm  
bn  
8
9
bk  
bnbm bl  
PLAY mode icon (page 30)  
Information icon (page 11)  
Remote capture icon (page 86)  
Recording mode icon (page 39)  
Menu icon (page 58)  
bo  
bp  
bq  
br  
bs  
NOTE  
Movie capacity and  
even if “Information On” is selected for the information display setting (page 11).  
– Portrait orientation display  
•
Snapshot capacity do not appear in the following cases,  
bm  
bn  
– When the monitor screen and lens are facing in the same direction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
   
. Movie Recording  
Movie quality (pages 47, 62)  
1
2
3
4
1
2 34  
Recording time switch icon (page 48)  
Movie remaining time icon (page 48)  
Remaining movie memory capacity/  
Movie recording time (pages 48, 132)  
Zoom icons (pages 32, 44)  
5
6
5
6
“c” Movie stop icon (pages 33, 48)  
. Snapshot Viewing  
Tab (page 30)  
1
2
3
4
5
6
7
8
9
bk  
bl  
bm  
bn  
1
2 3 4  
Protect indicator (page 81)  
Folder name/file name (page 101)  
Snapshot image size (page 61)  
Image menu icon (page 73)  
Image scroll icons (pages 35, 69)  
Battery level indicator (page 25)  
Date/time (pages 25, 106)  
REC mode icon (page 30)  
Information icon (page 11)  
Image send icon (pages 89, 91)  
Delete icon (page 35)  
bn  
bm  
bl  
bk  
9
5
6
8
7
Menu icon (page 76)  
. Movie Playback  
Tab (page 30)  
1
2
1
2 3 4  
Protect indicator (page 81)  
Folder name/file name (page 101)  
Movie quality (pages 47, 62)  
Image menu icon (page 73)  
Movie recording time (page 69)  
Image scroll icons (pages 35, 69)  
Battery level indicator (page 25)  
Date/time (pages 25, 106)  
“6” Movie play icon (page 69)  
5 3  
6
4
5
6
7
8
9
bk  
7
bk  
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
     
. Selecting Display Information (DISP)  
Each touch of “DISP” will cycle through settings that display or hide on-screen  
information. You can configure separate settings for the REC mode and PLAY mode.  
• If “DISP” is not displayed on the screen, touch the tab to display it.  
• Display information cannot be changed during movie recording.  
Off  
No information displayed.  
Information On  
Shows information about image settings, etc.  
Shows more detailed information about settings.  
• When Status On is selected, you will not be able to view the  
subject on the monitor screen.  
Status On  
When Status On is selected for display information in the PLAY mode, the exposure,  
shutter speed, and ISO sensitivity setting values of the currently displayed image are  
displayed in orange when the current image’s Auto Exposure (AE) is not correct.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Quick Start Basics  
What you can do with your CASIO camera  
Your CASIO camera is packed with a powerful selection of features and functions to  
make recording of digital images easier, including the following main functions.  
A variety of shooting styles  
The frame can be opened and the LCD monitor screen  
rotated into positions that make long-term shooting  
more comfortable and simplify self-shooting.  
*See page 14 for more information.  
Simple touch panel operation  
The monitor screen is a touch panel that can be used  
to perform operations.  
*See page 17 for more information.  
Simple self-portrait shooting  
The monitor screen can be rotated so it faces in the  
same direction as the camera’s lens, making self-  
shooting much easier.  
*See page 46 for more information.  
Make-Up  
Make-up smoothes the skin texture of the subject and  
softens facial shadows caused by harsh sunlight for  
better looking portraits.  
*See page 42 for more information.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
   
ART SHOT  
A variety of artistic effects help to make even common,  
ordinary subjects become more novel and exciting.  
“ART SHOT” provides the following effects: HDR Art,  
Sparkling Shot, Toy Camera, Soft Focus, Light Tone,  
Pop, Sepia, Monochrome, Miniature, Fisheye.  
*See page 40 for more information.  
Extract a subject from one  
photo and insert it into  
another  
A simple operation lets you extract a person or object out of one snapshot and  
insert into another snapshot.  
*See pages 78, 80 for more information.  
Paint  
Draw figures, write text, or stamp information into a  
recorded snapshot.  
*See page 77 for more information.  
Wireless LAN Connection  
Turns your smartphone into a camera remote  
controller and allows you to send images recorded with  
your camera to your smartphone.  
*See page 84 for more information.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Changing the Camera Style to Suit Shooting Conditions  
You can change the configuration of the camera by opening or closing the frame and  
rotating the monitor screen panel to suit shooting conditions.  
IMPORTANT!  
• Do not apply strong pressure to the surface of the monitor screen. Doing so can  
damage it.  
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign  
matter on the lens can interfere with proper operation of the camera. Use a blower  
or other means to keep the lens and flash window free of dirt and dust, and wipe  
gently with a soft, dry cloth.  
Opening and Closing the Frame  
The frame of the camera can be rotated 360 degrees.  
1. With the monitor screen facing towards  
you, hold onto the frame.  
2. Push the monitor screen panel from  
behind.  
3. Holding the edges of the monitor  
screen panel, swing the frame open.  
IMPORTANT!  
• Do not try to open or close the frame while the monitor screen panel is rotated.  
Doing so can cause the frame to come into contact with the monitor screen panel  
and cause malfunction.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
     
Rotating the Monitor Screen  
Use the steps below to rotate the monitor screen.  
NOTE  
• While holding the monitor screen panel as shown in the illustration, you can rotate  
it 180 degrees clockwise and 90 degrees counterclockwise.  
• The monitor screen panel can also be rotated when the frame is closed.  
1. Hold the camera as shown in the  
illustration.  
2. Firmly holding the frame, carefully rotate the monitor screen panel.  
180 degrees clockwise  
90 degrees counterclockwise  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
Camera Configurations  
You can open the frame and rotate the monitor screen for a variety of different styles.  
Normal Shooting  
Movie Recording  
Shoot with the monitor screen facing the Open the frame 90 degrees and hold the  
opposite direction of the lens.  
frame. You can also shoot with the  
camera upside down, if you like.  
Tabletop Shooting  
Self-portrait Shooting  
Point the monitor screen and lens in the Open the frame, point the monitor  
same direction and open the frame  
about 30 degrees so the camera can  
stand up.  
screen and lens in the same direction,  
and press the shutter button on the  
frame to shoot.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
 
NOTE  
• When shooting hold the camera still. Carefully press the shutter button and take  
care to avoid all movement as the shutter releases and for a few moments after it  
releases.  
• Take care that your fingers and the strap do not cover  
any of the areas indicated in the illustration.  
LED light  
• To protect against accidentally dropping the camera,  
attach the wrist strap and make sure it is around your  
fingers or wrist while you are operating the camera.  
• Never swing the camera around by its strap.  
• The supplied strap is intended for use with this  
camera only. Never use it for any other purpose.  
Microphone  
Lens  
IMPORTANT!  
• Take care to ensure that your finger is not blocking or  
is not too close to the LED light. Fingers can cause  
unwanted shadows when shooting.  
Using the Touch Panel  
The monitor screen of the camera is a touch panel. This means you can perform the  
following operations by touching the screen with your fingers.  
Touch  
Momentarily touching the screen with your finger.  
Touch the screen to select an icon or menu item, and  
to configure settings.  
Touch-and-hold  
Holding your finger against the screen.  
Touch and hold the screen to scroll images at high  
speed, or to perform continual frame-by-frame  
playback of a movie.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
   
Drag  
Holding your finger against the screen as you drag it  
up, down, left, or right.  
Use drag to move a screen image to a different  
location, and to scroll between images.  
Spread  
Holding your thumb and forefinger against the screen  
as you spread them out.  
Use spread to enlarge the screen image.  
Squeeze  
Holding your thumb and forefinger against the screen  
as you bring them together.  
Use squeeze to reduce the size of the screen image.  
IMPORTANT!  
• Never use a pointed or hard object to perform screen operations. Doing so can  
damage the screen.  
NOTE  
• Applying a commercially available LCD protective sheet will reduce the operation  
sensitivity of the monitor screen.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
     
First, charge the battery prior to use.  
Note that the battery of a newly purchased camera is not charged. Perform the steps  
below to load the battery into the camera and charge it.  
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)  
for power. Never try to use any other type of battery.  
Loading the Battery  
1. Open the cover.  
While depressing the [BATT.OPEN]  
button, slide the cover in the direction  
indicated by the arrow in the illustration.  
1
3
2
[BATT.OPEN]  
button  
2. Load the battery.  
Battery  
NG  
With the EXILIM logo on the battery  
upwards, load the battery into the  
camera as shown in the illustration.  
OK  
EXILIM logo  
3. Close the cover.  
While holding down the [BATT.OPEN]  
button, align the tabs of the cover with the  
notches on the camera and then slide the  
cover in the direction of the arrow.  
1
2
3
[BATT.OPEN]  
button  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
         
To replace the battery  
1. Open the battery cover and remove the  
current battery.  
As shown in the illustration, pull up the edge of  
the battery to remove it.  
2. Load a new battery.  
Charge the Battery  
You can use either of the two following methods to charge the battery. Before  
charging the battery, use the procedure under “Opening and Closing the Frame”  
(page 14) to open the frame.  
• USB-AC adaptor  
• USB connection to a computer  
. To charge with the USB-AC adaptor  
The adaptor lets you charge the battery while it is loaded in the camera.  
While the camera is turned off, connect in the sequence shown below.  
Charging time: Approximately 140 minutes  
[USB] port  
USB-AC adaptor  
3
2
1
Micro USB cable  
(included with camera)  
u mark of the small (micro USB) connector facing the  
side opposite that of the monitor screen.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
     
IMPORTANT!  
• A battery that has not been used for a long time, or ambient temperature extremes  
can cause charging to take longer than normal. If charging takes longer than about  
five hours, a timer will terminate it automatically, even if the battery is not fully  
charged. This is indicated by the back lamp flashing red. If the battery has not been  
used for a very long time, charging may be terminated automatically and the back  
lamp may start flashing red after only about 60 minutes. In either case, disconnect  
the USB cable from the camera and then reconnect it to resume charging.  
• Pressing [p] (Power) while the USB-AC adaptor is connected to the camera will  
turn on the camera with power being supplied by the battery. Because of this,  
charging will stop.  
• The USB-AC adaptor will become warm during charging. This is normal and does  
not indicate malfunction.  
• The shape of the power plug depends on each country or geographic area.  
Back Lamp Operation  
Back lamp  
Lamp Status  
Description  
Lit Red  
Charging  
Abnormal ambient temperature, USB-AC  
adaptor problem, or battery problem (page  
121), or charging terminated by the timer  
Flashing Red  
Off  
Charging complete  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
USB Cable Connection Precautions  
• When connecting the USB cable to the camera, make sure that the cable  
connector and monitor screen panel are oriented correctly as shown in the  
illustration below.  
Make sure that the u mark side of the  
USB cable connector and the front of the  
monitor screen panel (the side opposite that  
of the monitor screen) are facing in the same  
direction.  
Front of monitor screen  
panel  
The back lamp always initially light after charging starts. Even if the battery is  
already fully charged, the lamp will light momentarily.  
If the lamp does not light, check the orientation of the USB cable connector.  
• Make sure that you insert the cable connector into the USB port until you feel it  
click securely into place. Failure to insert the connector fully can result in poor  
communication or malfunction.  
• Note that even while the connector is fully inserted, you  
still will be able to see the metal part of the connector as  
shown in the illustration.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
. To charge using a USB connection to a computer  
USB connection lets you charge the battery while it is loaded in the camera.  
While the camera is turned off, connect in the sequence shown below (  
,
1 2  
).  
Computer  
(power turned on)  
[USB] port  
USB  
USB port  
2
1
Micro USB cable  
(included with camera)  
u mark of the small (micro USB) connector facing the side  
opposite that of the monitor screen.  
• If the camera is on, press [p] (Power) to turn it off before connecting it to your  
computer.  
Charging time: Approximately 170 minutes  
IMPORTANT!  
• The first time you connect the camera to your computer with the USB cable, an  
error message may appear on your computer. If this happens, disconnect and then  
reconnect the USB cable.  
• A battery that has not been used for a long time, certain types of computers, and  
connection conditions can cause charging to take more than approximately five  
hours, which will trigger a timer that terminates charging automatically, even if the  
battery is not fully charged. If this happens, disconnect and then reconnect the  
USB cable to restart charging. To complete charging faster, use of the included  
USB-AC adaptor is recommended.  
• If the battery has not been used for a very long time, charging may terminate  
automatically and the back lamp may start flashing red or go out after only about  
60 minutes. In either case, use of the USB-AC adaptor that comes with the camera  
is recommended.  
• If you turn on the camera while charging over a USB connection to a computer is in  
progress, the camera will establish a USB connection with the computer. Though  
charging normally should continue at this time, certain types of computers or  
connection environments may stop charging if supply power is low. This will be  
indicated by the camera’s back lamp lighting green.  
• Charging is not performed while the connected computer is in the hibernate mode.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
   
Back Lamp Operation  
Lamp Status  
Back lamp  
Description  
Lit Red,  
(Lit/Flashing Amber)  
Charging  
Abnormal ambient temperature,  
charging taking abnormally long, or  
battery problem (page 121)  
Flashing Red  
Off, (Lit Green)  
Charging complete  
• The information in parentheses in the above table shows the lamp status while the  
camera is turned on during charging.  
Other Charging Precautions  
• With the two charging methods described above, you can charge the camera’s  
battery (NP-150) without removing it from the camera. Never use any other type of  
charger device. Attempting to use a different charger can result in unexpected  
accident.  
• This model can be charged only via from USB 2.0 specification USB port only.  
• USB charging devices and power supply devices are subject to fixed standards.  
Use of an inferior device or a device that is not up to standard can cause  
malfunction and/or failure of your camera.  
• Operation is not guaranteed in the case of a computer built or modified by you.  
Even in the case of a commercially available computer, certain USB port  
specifications may make it impossible to charge via the USB cable.  
• A battery that is still warm immediately after normal use may not charge fully. Give  
the battery time to cool before charging it.  
• A battery discharges slightly even when it is not loaded in the camera. Because of  
this, it is recommended that you charge the battery immediately before you need to  
use it.  
• Charging the camera’s battery may cause interference with TV and radio reception.  
If this happens, plug the USB-AC adaptor into an outlet that is further away from  
the TV or radio.  
• Actual charging time depends on current battery capacity and charging conditions.  
• Do not use the USB-AC adaptor with any other device.  
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.  
Use of any other type of devices may result in improper charging.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
 
Checking the Current Battery Level  
As battery power is consumed, a battery indicator on the monitor screen indicates its  
current level as shown below.  
Level  
High  
Low  
*
Battery Indicator  
Indicator Color  
*
*
*
Cyan  
*
Yellow  
Red  
*
Red  
indicates battery power is low. Charge the battery as soon as possible.  
Recording is not possible when is indicated. Charge the battery immediately.  
• The level shown by the battery indicator may change when you switch between the  
REC mode and PLAY mode.  
• Leaving the camera for about 30 days with no power supplied while the battery is  
dead will cause its date and time settings to be cleared. A message telling you to  
configure time and date settings will appear the next time you turn on the camera  
after restoring power. When this happens, configure date and time settings (page  
106).  
• See page 135 for information about battery life and number of shots.  
Configuring Basic Settings the First Time You Turn On the  
Camera  
The first time you turn on the camera, a screen appears for configuring the display  
language, date, and time settings. Failure to set the date and time correctly will cause  
the wrong date and time data to be recorded with images.  
IMPORTANT!  
• A screen for language selection will not appear in step 2 of the procedure below if  
you purchased a camera intended for the Japanese market. To change the display  
language from Japanese in this case, use the procedure under “Specifying the  
Display Language (Language)” (page 107). Note that a version of this manual in  
the language you select may not be included with a camera intended for the  
Japanese market.  
• Camera models sold in certain geographic areas may not support display language  
selection.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
     
1. Press [p] (Power) to turn on the camera.  
2. Drag (page 18) upwards and downwards until  
you find the language you want, and then touch  
to select it.  
3. Touch the date display format you want.  
Example: July 10, 2015  
YY/MM/DD * 15/7/10  
DD/MM/YY * 10/7/15  
MM/DD/YY * 7/10/15  
[p] (Power)  
4. Touch the value you want to change (year,  
month, day, hour, minute).  
5. Touch “8” or “2” to change the currently  
selected value.  
• Touching and holding “8” or “2” will change the  
setting at high speed.  
• To switch between 12-hour and 24-hour format,  
touch the 12/24 hour switch icon.  
12/24 hour switch icon  
6. When the date and time settings are the way you want, touch “OK”.  
7. Touch “Auto” or “Premium Auto Pro” to select the default auto  
recording mode you want.  
8. Touch “Apply”.  
• You will be able to change this setting later, if you want. See page 31 for  
details.  
If you make a mistake configuring display language, date, or time settings with the  
above procedure, refer to the following pages for information about how to correct  
the settings.  
– Display language: Page 107  
– Date and time: Page 106  
NOTE  
• Each country controls its local time offset and the use of summer time, and so they  
are subject to change.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Preparing a Memory Card  
Though the camera has built-in memory that can be used to store images and  
movies, you probably will want to purchase a commercially available memory card for  
greater capacity. The camera does not come with a memory card. Images recorded  
while a memory card is loaded are saved to the memory card. When no memory card  
is loaded, images are saved to built-in memory.  
• For information about memory card capacities, see page 131.  
Supported Memory Cards  
– microSD Memory Card  
– microSDHC Memory Card  
– microSDXC Memory Card  
• The above are supported memory card types as of April 2013.  
• This camera supports use of microSD memory cards of the  
following types and capacities: microSD memory cards up to 2GB, microSDHC  
memory cards from 2GB up to 32GB, microSDXC memory cards from 32GB up to  
2TB. Note that the ability to use any particular card with this camera, even if it  
satisfies the above capacity and type requirements, is not guaranteed.  
Warning!  
*
0 Memory cards are small and present a risk of accidentally being swallowed  
by infants and young children. Keep memory cards out of the reach of  
infants and young children. If a memory card is ever swallowed accidentally,  
contact a physician immediately.  
+
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
     
To load a memory card  
1. Press [p] (Power) to turn off the  
camera and then open the frame  
(page 14).  
[CARD HDMI] cover  
2. Hook your nail into the groove of  
the [CARD HDMI] cover and pull the  
cover in the direction indicated by  
the arrow to open it.  
3. Load a memory card.  
Positioning the memory card so its back  
is facing upwards (towards the monitor  
screen side of the camera), slide it into  
the card slot all the way in until you hear it  
click securely into place.  
Back  
Front  
Back  
4. Close the [CARD HDMI] cover and  
then return the frame to its original  
position.  
IMPORTANT!  
• Never insert anything besides a supported memory card (page 27) into the memory  
card slot.  
• Should water or any foreign object ever get into the card slot, immediately turn off  
the camera, and contact your retailer or nearest CASIO authorized service center.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
   
. To replace the memory card  
Press the memory card and then release it.  
This will cause it to pop out of the memory  
card slot slightly. Pull the card out the rest of  
the way and then insert another one.  
• Never remove a card from the camera  
while the back lamp is flashing green.  
Doing so can cause the image save  
operation to fail and even damage the  
memory card.  
To format (initialize) a new memory card  
Format a memory card on the camera before using it for the first time.  
IMPORTANT!  
• Formatting a memory card that already has snapshots or other files on it, will delete  
its contents. Normally you do not need to format a memory card again. However, if  
storing to a card has slowed down or if you notice any other abnormality, re-format  
the card.  
• Be sure to use the camera to format a memory card. Formatting a card on a  
computer will result in a non-SD standard format, which can greatly slow down  
processing time and cause compatibility, performance, and other problems.  
1. Load a memory card (page 28).  
2. Turn on the camera and then touch “MENU”.  
• If “MENU” is not displayed on the screen, touch the tab to display it (page 38).  
3. Drag upwards and downwards until you find “Setup”, and then touch it.  
4. Touch “Format”.  
5. Touch “Format” and then touch “Yes”.  
This starts the memory card format operation.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
   
Turning Power On and Off  
. To turn on the camera  
Back lamp  
Press [p] (Power).  
This will turn on the camera, which is indicated when the  
back lamp lights green, and enter the REC mode.  
Entering the REC Mode and PLAY Mode  
In the REC mode, touch “p” (PLAY).  
• If Auto, BEST SHOT, or ART SHOT  
To enter the  
PLAY mode  
is selected as the recording mode,  
you can also switch to the PLAY  
mode by touching the tab and then  
touching “p” (PLAY).  
[p] (Power)  
Screen after tab is  
touched  
In the PLAY mode, touch the tab. On  
the screen image that appears, touch  
“r” (REC).  
To enter the  
REC mode  
. To turn off the camera  
Press [p] (Power).  
Tab  
“p” (PLAY) / “r” (REC)  
NOTE  
• To conserve battery power, an Auto Power Off function will turn off power  
automatically if you do not perform any operation for about five minutes.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
       
To Shoot a Snapshot  
Your camera has a variety of different recording modes to suit various shooting  
conditions and objectives (page 39). This section explains general shooting  
procedures using the auto recording mode.  
Selecting an Auto Recording Mode  
You can select one of two auto recording modes (Auto or Premium Auto Pro)  
according to your digital imaging needs.  
REC Screen  
Icon Display  
Setting  
Auto  
Description  
This is the standard Auto recording mode.  
With Premium Auto Pro recording, the camera  
automatically determines whether you are shooting a  
subject or scenery, and other conditions. Premium  
Auto Pro recording delivers higher image quality than  
standard Auto recording.  
Premium  
Auto Pro  
• It also requires more power (and runs down the  
battery quicker) than Auto.  
1. Press [p] (Power) to turn on the camera.  
2. Touch the second icon from the top  
(second icon from the right in the case of  
landscape display orientation) (Recording  
mode).  
If the icon is not displayed on the screen, touch  
the tab to display it.  
Recording mode icon  
3. Touch “Auto” or “Premium Auto Pro” to  
select the auto recording mode you want.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
       
To shoot a snapshot  
1. Point the camera at the subject.  
Movie capacity  
(recording time)  
If you are using Premium Auto Pro, text will  
appear in the lower right corner of the monitor  
screen describing the type of shot the camera has  
detected.  
Snapshot capacity  
(number of shots)  
• Touch the zoom icons to change the zoom  
factor (page 44).  
Type of shot  
Zoom icons  
(Telephoto)  
– (Wide Angle)  
+
2. Half-press the shutter button to focus  
Shutter buttons  
the image.  
When focus is complete, the camera will  
beep, the back lamp will light green, and  
the focus frame will turn green.  
Half-press  
Press lightly until  
the button stops.  
Back lamp  
Focus frame  
Beep, beep (Image is in focus.)  
When you half-press the shutter button, the camera  
automatically adjusts exposure and focuses on the  
subject it is currently pointed at. Mastering how  
much pressure is required for a half-press and a  
full-press of the shutter button is an important  
technique for good-looking images.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
           
3. Continuing to keep the camera still,  
press the shutter button the rest of  
the way down.  
Full-press  
This records the snapshot.  
Snap (Image is recorded.)  
Recording a Movie  
Touch “b” (Movie) to start movie recording. Touch  
“c” (Movie Stop) to stop recording.  
See page 47 for details.  
“b” (Movie)/  
“c” (Movie Stop)  
NOTE  
• You also can shoot a snapshot by touching a point on the monitor screen (page  
59).  
• You can specify the image size for snapshots. See page 61 for more information.  
. If the image does not focus...  
If the focus frame stays red and the back lamp is flashing green, it means that the  
image is not in focus (because the subject is too close, etc.). Re-point the camera at  
the subject and try to focus again.  
. Shooting with Auto  
“Focus lock” (page 67) is the name of a technique you can use when you want to  
shoot an image in which the subject to be focused on is not within the focus frame in  
the center of the screen.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
 
. Shooting with Premium Auto Pro  
• In addition to shutter speed and ISO sensitivity, the camera automatically executes  
the following operation as required when shooting with Premium Auto Pro.  
– Auto Focus is normally performed until you half-press the shutter button.  
– The camera automatically determines the focus point on the screen and focuses  
there.  
– When shooting people, the face detection feature detects the faces of up to ten  
individuals and adjusts focus and brightness accordingly.  
• When shooting with Premium Auto Pro, the message “Processing Premium Auto.”  
may appear on the monitor screen. If you feel the camera is taking too long to  
process data, try shooting with standard Auto instead.  
• In some cases, Premium Auto Pro may not be able to interpret the shooting  
environment correctly. If this happens, shoot with standard Auto.  
• If “Š” is displayed, the camera will shoot a series of CS images and merge them  
into a final image. Take care to avoid any camera and subject movement until  
shooting of all of the CS images is complete.  
Viewing Snapshots  
Use the following procedure to view snapshots on the camera’s monitor screen.  
• For information about how to play back movies, see page 69.  
1. Touch “p” (PLAY) to enter the PLAY mode.  
This will display one of the snapshots currently  
stored in memory.  
• If “Premium Auto Pro” is selected as the  
recording mode, touch the Review image (page  
67) in the lower left corner of the monitor screen.  
• Information about the displayed snapshot also is  
included (page 10).  
• You also can clear the information to view only  
the snapshot (page 11).  
“p” (PLAY)  
• You can zoom the screen image by touching the  
monitor screen (page 73).  
If you are recording a snapshot that is very important to you, it is recommended  
that you zoom the image and check its details after recording it.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
   
2. Touch “ú” or “õ”, or drag left or right across the screen image to  
scroll through the snapshots.  
• To scroll at high speed, touch and hold “ú” or “õ”.  
“õ”  
“õ”  
“ú”  
“ú”  
NOTE  
• Pressing the shutter button while in the PLAY mode or while a menu screen is  
displayed will switch directly to the REC mode.  
• A question mark (?) will be displayed for images that cannot be displayed for some  
reason.  
Deleting Snapshots and Movies  
If memory becomes full, you can delete snapshots and movies you no longer need in  
order to free up storage and record more images.  
IMPORTANT!  
• Remember that a file (image) delete operation cannot be undone.  
. To delete a single file  
1. In the PLAY mode, touch “ú” or “õ” to display the file you want to  
delete.  
2. Touch “t”.  
• If “t” is not displayed on the screen, touch the tab  
to display it.  
3. Touch “1 File”.  
This will delete the selected image.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
     
. To delete specific files  
1. Enter the PLAY mode.  
2. Touch “t”.  
• If “t” is not displayed on the screen, touch the tab to display it.  
3. Touch “Select”.  
This displays a file selection screen.  
4. Touch a file you want to delete.  
This will select the check box of the selected file’s image.  
5. After you are finished selecting files, touch “Delete”.  
6. Touch “Delete”.  
This deletes the files you selected.  
• To cancel the delete operation, touch “Cancel” in step 6.  
. To delete all files  
1. Enter the PLAY mode.  
2. Touch “t”.  
• If “t” is not displayed on the screen, touch the tab to display it.  
3. Touch “All Files”.  
4. Touch “Delete”.  
This will cause the message “There are no files.” to appear.  
Snapshot Shooting Precautions  
Operation  
• If unwanted light is shining onto the lens, shade the lens with your hand when  
shooting an image.  
Monitor Screen when Shooting Snapshots  
• Subject brightness conditions can cause monitor screen response to slow and can  
cause digital noise in the monitor screen image.  
• The image that appears on the monitor screen is for image composition. The actual  
image will be recorded in accordance with the currently selected recording mode  
(page 39).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
 
Shooting Indoors under Fluorescent Lighting  
• Minute flickering of fluorescent lighting can affect the brightness or color of an  
image.  
Other Precautions  
• The slower the shutter speed, the greater the possibility that noticeable noise will  
be generated in an image. Because of this, the camera automatically performs a  
noise reduction at slow shutter speeds. The noise reduction process causes it to  
take longer to record images at lower shutter speeds. The shutter speeds for which  
noise reduction is performed depend on the camera setup and shooting conditions.  
• A noise reduction process is performed when ISO sensitivity is set to a high value.  
This can cause the camera to take relatively longer to be ready to shoot again after  
you press the shutter button. Do not perform any operation while the image  
recording operation is in progress.  
• Due to the characteristics of the imaging element used by the camera, very fast  
moving objects in an image may appear distorted.  
. Auto Focus Restrictions  
• Any of the following can make proper focus impossible.  
– Solid color wall or other very low contrast subject  
– Strongly back lit subject  
– Very shiny subject  
– Blinds or other subject with a repeating horizontal pattern  
– Multiple subjects at varying distances from the camera  
– Subject in a dark location  
– Camera movement while shooting  
– Fast-moving subject  
– Subjects outside the focus range of the camera  
• If you cannot focus properly, try using focus lock (page 67).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Recording Images  
Touching the monitor screen in the REC mode will display a screen for configuring  
REC mode settings.  
. To configure REC mode settings  
1. Press [p] (Power) to turn on the  
camera and enter the REC mode.  
• If the camera is in the PLAY mode, touch  
“r” (REC) to enter the REC mode.  
[p] (Power)  
“r” (REC)  
2. Touch the item whose setting you want to change.  
• If there are no icons along the left side of the screen, touch the tab to display  
them.  
Tab (page 30)  
Menu (page 58)*  
Recording mode (page 39)  
Remote capture (page 86)  
Information (page 11)  
PLAY mode/Make-up Level  
(pages 30, 42)  
Zoom (page 44)  
Quick send (page 88)  
Movie (page 47)  
1
1
2
3
4
5
6
2
3
4
5
6
7
8
9
7
8
9
* Depending on the recording mode, some of the items on the menu that  
appears may not be usable.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
     
Selecting a Recording Mode  
The camera has a variety of different recording modes.  
1. In the REC mode, touch the recording  
mode icon (page 31).  
• If the icon is not displayed on the screen, touch  
the tab to display it.  
2. Touch the icon of the recording mode you  
want to use.  
Recording mode icon  
This enters the selected recording mode.  
Standard Auto recording mode. This is the mode normally  
used for shooting (page 31).  
Auto  
With Premium Auto Pro recording, the camera  
automatically determines whether you are shooting a  
subject or scenery, and other conditions. Premium Auto  
Pro recording delivers higher image quality than standard  
Auto recording mode (page 31).  
Premium Auto  
Pro  
With BEST SHOT, simply select the sample scene that  
resembles the type of shot you want, and the camera  
automatically configures ideal settings for the subject and  
shooting conditions (page 50).  
BEST SHOT  
ART SHOT  
A variety of artistic effects help to make even common,  
ordinary subjects become more novel and exciting (page  
40).  
Make-up smoothes the skin texture of the subject and  
softens facial shadows caused by harsh sunlight for better  
looking portraits (page 42).  
Make-up  
In this mode, the camera starts a self-timer countdown  
when it detects subject movement (page 43).  
Motion Shutter  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
   
Shooting with Artistic Effects (ART SHOT)  
A variety of artistic effects help to make even common, ordinary subjects become  
more novel and exciting.  
Scene  
Description  
Applies HDR (High Dynamic Range, page 52) photography  
to transform snapshots into works of art that provide a  
greater degree of expression than conventional imaging.  
HDR Art  
Softens the overall image and adds points of light for a  
sparkle effect.  
Sparkling Shot  
Toy Camera  
Darkens the periphery and changes hues for a toy camera  
effect.  
Soft Focus  
Light Tone  
Pop  
Blurs overall focus for a mysteriously soft effect.  
Weakens contrast to create an elegantly subdued effect.  
Strengthens saturation for richer colors.  
Sepia  
Sepia colors are used to create a retro effect.  
Enhances contrast to create a grainy print effect.  
Monochrome  
Blurs some of the focus to make the image look like a  
miniature.  
Miniature  
Fisheye  
Humorous effect that looks like it was shot with a fisheye  
lens.  
1. In the REC mode, touch the recording mode icon (page 38).  
2. Touch “C” (ART SHOT).  
3. Touch the ART SHOT scene you want to use.  
Select from among: HDR Art, Sparkling Shot, Toy Camera, Soft Focus, Light  
Tone, Pop, Sepia, Monochrome, Miniature, Fisheye.  
• Touch the arrow on the right side of the monitor  
screen to display another scene.  
• Touching “ ” in the upper right corner of the  
screen and then touching a ART SHOT scene will  
display detailed information about the scene.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
 
4. Touch the “ART” icon.  
The intensity of the selected effect can be adjusted  
as described below. Note, however, that the  
“Miniature” effect cannot be adjusted.  
Scene  
Adjustment  
Effect level  
Effect type  
Hue  
HDR Art  
Sparkling Shot  
Toy Camera  
Soft Focus  
Light Tone  
Pop  
Effect level  
Hue  
Effect level  
Effect level  
Effect level  
Effect level  
Sepia  
Monochrome  
Fisheye  
5. Touch the level you want to select.  
6. Touch “OK”.  
7. Press the shutter button to shoot.  
NOTE  
• This function works best when the camera is made stationary by placing it on a  
level surface, etc.  
• With the HDR Art scene, the settings below are configured automatically.  
– LED light: Off  
• Shooting with this REC mode makes the shooting range narrower than normal.  
• The desired effect may not be attained if the camera or subject moves during  
shooting.  
• Depending on shooting conditions and image composition, this REC mode may not  
be able to produce the desired result.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Recording Beautiful Portraits (Make-up)  
Make-up smoothes the skin texture of the subject and softens facial shadows caused  
by harsh sunlight for better looking portraits.  
1. In the REC mode, touch the recording mode icon (page 31).  
2. Touch “½” (Make-up).  
3. Touch the tab.  
4. Touch “ ” (Make-up Level).  
5. Touch the mode and level you want to select.  
Lightens the skin tone of the  
subject.  
Brightening  
Produces a beautifully  
Natural  
natural looking skin tone.  
You can select a make-up  
level effect intensity within  
the range of 0 (Off) to +12  
Make-up Level  
(Strongest).  
6. Touch “OK”.  
7. Press the shutter button to shoot.  
NOTE  
• Note that Make-up can be used even when the recording mode is Premium Auto  
Pro or Motion Shutter. In either of these recording modes, perform steps 3 through  
7 of the above procedure to select the Make-up mode and level you want.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
 
Using Motion Shutter to Trigger a Self-timer Operation  
(Motion Shutter)  
With Motion Shutter the camera automatically triggers  
a self-timer countdown whenever it detects subject  
movement within an icon you specify on the monitor  
screen. This means you can control operation of the  
self-timer from a distance by waving your hand, so you  
can include yourself in the image being shot.  
1. In the REC mode, touch the recording mode  
icon (page 39).  
2. Touch “l” (Motion Shutter).  
3. Drag the start self-timer icon “ ” and preview icon “ ” to the  
location in the image where you want movement to be detected.  
• Keep the two icons separate from each other. Whenever you move an icon to a  
location where it overlaps the other icon, the other icon will move out of the way  
automatically.  
4. When everything is ready, press the shutter button all the way down.  
The start self-timer icon will change to “ ” to indicate that the camera is in  
standby for shooting.  
5. Facing the camera, move your hand or perform some other movement  
in the area of the start self-timer icon you positioned in step 3.  
When the camera detects subject movement within the icon, it will automatically  
start a self-timer countdown. The camera will shoot an image when the  
countdown reaches zero, and then go back into Motion Shutter standby to wait  
for the next trigger movement.  
NOTE  
• The trigger time of the Motion Shutter self-timer is fixed at two seconds.  
• The preview icon “ ” will appear on the monitor screen when a snapshot is shot.  
When the camera detects movement within the preview icon, it will display the  
image that was shot for three seconds.  
• Motion Shutter exits standby automatically after it shoots six images.  
• To cancel Motion Shutter standby at any time, press the shutter button or touch the  
monitor screen.  
• Motion Shutter may not operate properly when there is little difference in the color  
of the subject and the color of the background enclosed by the boundary, or when  
the subject is located far away from the camera, making it too small.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
 
Shooting with Zoom  
Your camera is equipped with various types of zoom: HD Zoom, SR Zoom, and digital  
zoom. The maximum zoom factor depends on the image size setting.  
Allows greater zoom capabilities by cutting out a portion of the  
HD Zoom  
original image and enlarging it, without deterioration of image  
quality.  
Applies super resolution technology to suppress image  
deterioration.  
SR Zoom  
A digital process is used to enlarge the center of the image, so  
there is deterioration of image quality.  
Digital zoom  
1. In the REC mode, touch the zoom icons to  
Zoom icons  
zoom.  
+ (Telephoto)  
– (Wide Angle)  
+ (Telephoto) : Enlarges the subject and narrows the range.  
– (Wide Angle): Reduces the size of the subject and broadens the range.  
2. Press the shutter button to shoot the image.  
NOTE  
• Telephoto images are prone to blurring caused by camera movement when you  
press the shutter button. Because of this, stabilizing the camera by placing it on a  
level surface, etc. is recommended.  
• Zoom operations are disabled during high speed movie recording. Perform the  
zoom operation before you touch “b” (Movie) to start recording.  
• Zoom operations are not supporting during Slide Panorama shooting. The zoom  
setting is fixed at full wide angle.  
• “Ù” is displayed on the monitor screen while digital zoom is being used.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
     
. Zoom Factor  
• The image deterioration point depends on the image size (page 61) and recording  
mode (page 39). The smaller the image size, the higher the zoom factor you can  
use before reaching the image deterioration point.  
Auto, Premium Auto Pro, Motion Shutter  
Undeteriorated  
Zoom Limit  
Maximum  
Zoom Factor  
Image Size  
12M  
3:2  
1.5X  
4.0X  
5M  
2.3X  
9.4X  
6.2X  
VGA  
15.9X  
BEST SHOT (Multi SR Zoom)  
Image Size  
Undeteriorated  
Zoom Limit  
Maximum  
Zoom Factor  
12M  
3:2  
2.0X  
4.0X  
5M  
3.1X  
6.2X  
VGA  
12.5X  
15.9X  
ART SHOT, BEST SHOT (excluding “Multi SR Zoom”)  
Undeteriorated  
Image Size  
Maximum  
Zoom Factor  
Zoom Limit  
12M  
1.0X  
3:2  
4.0X  
5M  
1.6X  
6.2X  
6.2X  
VGA  
15.9X  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
 
Shooting a Self-portrait  
You can configure the camera so the monitor screen and lens  
are facing in the same direction. This means you can shoot  
with the self-timer as you compose the self-portrait on the  
monitor screen.  
• When using the self-timer to shoot a self-portrait, select one  
of the following recording modes.  
– Auto  
– Premium Auto Pro  
– Make-up  
1. Rotate the monitor screen panel so the screen is  
facing in the same direction as the lens (page 14).  
2. Select “Auto”, “Premium Auto Pro” or “Make-up” for the recording  
mode (pages 31, 42).  
3. Drag “r” (Self-timer) downwards to specify the  
self-timer countdown duration.  
The camera will shoot an image when the countdown  
reaches zero.  
• You can set a self-timer countdown duration within  
the range of two to ten seconds. The further you drag,  
the longer the duration.  
• To cancel an ongoing countdown, touch anywhere on  
the screen except where the self-timer icon is  
displayed.  
“r” (Self-timer)  
• Pressing the shutter button during an ongoing  
countdown will cancel the countdown and shoot an  
image.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
 
To record a movie  
The following procedure explains how to record a movie.  
• You can record a movie while one of the following  
recording modes is selected.  
– Auto  
“MENU”  
– Premium Auto Pro  
– BEST SHOT (HS Night Scene)  
– Make-up  
1. In the REC mode, touch “MENU”.  
• If “MENU” is not displayed on the screen, touch  
the tab to display it.  
2. Drag upwards and downwards until you find “Movie Quality”, and then  
touch to select it.  
3. Touch the item whose setting you want to change.  
Movie  
Quality  
REC Screen Frame Image Size  
Description  
Icon Display Rate  
(Pixels)  
Select this setting to record full  
high-definition (Full HD)  
1920 1080 movies. The aspect ratio of  
movies recorded with this  
setting is 16:9.  
x
Full HD  
30fps  
Select this setting to record  
high-definition (HD) movies.  
x
1280 720  
HD  
30fps  
The aspect ratio of movies  
recorded with this setting is  
16:9.  
Select this setting to record  
high speed movies at a speed  
of 240 fps.  
x
240fps 512 384  
HS240  
• Audio is not recorded.  
4. To close the menu screen, touch “MENU” or press the shutter button.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
 
5. Touch “b” (Movie).  
Recording time/  
Remaining recording time  
This will start recording.  
• Monaural audio is also recorded during movie  
recording while “Full HD” or “HD” is selected for  
the movie quality setting.  
• Touching “o” while recording is in progress will  
cause the remaining recording time and “R” to  
appear. Touch “o” again to switch back to the  
elapsed recording time.  
• When “Full HD” or “HD” is selected as the movie  
quality, you can perform a zoom operation while  
recording is in progress by touching the zoom  
icons.  
“b” (Movie)/  
“c” (Movie Stop)  
• When “Macro” is selected as the movie focus mode (page 66), you can half-  
press the shutter button before starting recording to focus.  
6. Touch “c” (Movie Stop) to stop recording.  
• Each movie can be up to 29 minutes long. Movie recording stops automatically  
after 29 minutes of recording. Movie recording also will stop automatically if  
memory becomes full before you stop movie recording.  
Minimizing the Effects of Camera Movement during Movie Recording  
You can configure the camera to minimize the effects of camera movement during  
Full HD and HD movie recording. Note, however, that this does not prevent image  
blur due to subject movement.  
High Speed Movie Recording Precautions  
• When shooting a high speed movie, shoot in a well-lit environment.  
• When recording a high speed movie, light source flicker can cause horizontal  
bands to appear in the image. This does not indicate malfunction of the camera.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
   
IMPORTANT!  
• Spending a long time using movie recording will cause the camera to become  
slightly warm to the touch. This is normal and does not indicate malfunction. The  
camera may automatically adjust its monitor screen brightness in order to reduce  
heat generation.  
• The camera also records audio along with Full HD and HD  
movies. Note the following points when shooting a movie.  
– Take care that the microphone is not blocked by your  
fingers, etc.  
– Good audio recording results are not possible when the  
camera is too far away from what you are trying to  
record.  
Microphone  
• Shooting movies for long periods in areas where  
temperature is relatively high can cause digital noise (dots of light) to appear in the  
movie image. A rise in the camera’s internal temperature also may force movie  
recording to stop automatically. If this happens, stop recording and allow the  
camera to cool down, which should cause normal operation to resume.  
• Using the camera’s built-in memory or certain types of memory cards can slow  
down processing speed. Whenever possible use an Ultra High-Speed Type  
memory card. Note, however, that not all operations can be guaranteed even if an  
Ultra High-Speed Type memory card is used. Certain movie quality settings can  
result in too much time being required to record data, which can result in breaks in  
the image and/or audio during playback. If this happens, the movie icon will turn  
yellow on the monitor screen.  
NOTE  
• Except for High Speed Movie, zoom operations are supported during movie  
recording (page 44). Zoom is disabled during high speed movie recording. If you  
b
want to use zoom, perform the zoom operation before you touch “ ” (Movie) to  
start recording.  
• SR Zoom (page 44) is disabled during movie recording.  
• The effects of camera movement in an image become more pronounced when you  
shoot close up or with a large zoom factor. Because of this, stabilizing the camera  
by placing it on a level surface, etc. is recommended.  
• During High Speed Movie recording, focus is fixed at the position where it was  
when recording started. To focus an image, half-press the shutter button for Auto  
b
Focus before you touch “ ” (Movie) to start recording.  
Recording Images  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
 
Using BEST SHOT  
BEST SHOT provides you with a collection of sample “scenes” that show a variety of  
different types of shooting conditions. When you need to change the setup of the  
camera, simply find the scene that matches what you are trying to achieve, and the  
camera sets up for it automatically. This helps to minimize the chance of ruined  
images due to poor exposure and shutter speed settings.  
. To shoot an image with BEST SHOT  
1. In the REC mode, touch the recording mode  
icon (page 31).  
• If the icon is not displayed on the screen, touch  
the tab to display it.  
2. Touch “b” (BEST SHOT).  
This will display a menu of BEST SHOT scenes.  
3. Touch the scene you want to select.  
• Touching “ ” in the upper right corner of the  
screen and then touching a BEST SHOT scene  
will display detailed information about the scene.  
4. Press the shutter button (if you are shooting a snapshot) or touch  
“b” (Movie) (if you are shooting a movie).  
. BEST SHOT Precautions  
• BEST SHOT scene images were not shot using this camera.  
• Images shot using a BEST SHOT scene may not produce the results you expected  
due to shooting conditions and other factors.  
• You can modify the camera settings that are configured after you select a BEST  
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults  
when you select another BEST SHOT scene or turn off the camera.  
• Movie recording is supported only while “HS Night Scene” is selected. Selecting  
“HS240” for the movie quality setting while the “HS Night Scene” BEST SHOT  
scene is selected will cause the camera to record movies using the auto recording  
mode.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
50  
   
Shooting Clearer Snapshots (Multi SR Zoom)  
Multi SR Zoom uses super-resolution technology and multiple Continuous Shutter  
(CS) images for higher quality and clarity across the entire image. For information  
about the zoom factor, see page 45.  
• When shooting with Multi SR Zoom, the camera may require more time for image  
data processing between shots.  
1. In the REC mode, touch “b” (BEST SHOT).  
2. Touch “Multi SR Zoom” scene.  
3. Press the shutter button to shoot.  
NOTE  
• Multi SR Zoom is effective when you want to capture delicate textures.  
• With this BEST SHOT scene, the LED light setting automatically becomes off.  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• The desired Multi SR Zoom effect may not be attained if the camera or subject  
moves during shooting.  
• Depending on shooting conditions and image composition, this BEST SHOT scene  
may not be able to produce the desired result.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
51  
 
Digitally Correcting for Overexposure and Underexposure  
(HDR)  
With HDR (High Dynamic Range), the camera shoots a series of CS images using  
different exposure settings and combines them into a final image to correct for  
overexposure or underexposure of subjects of different brightness levels.  
1. In the REC mode, touch “b” (BEST SHOT).  
2. Touch “HDR” scene.  
3. Press the shutter button to shoot.  
NOTE  
• This function works best when the camera is made stationary by placing it on a  
level surface, etc.  
• With this BEST SHOT scene, the LED light setting automatically becomes off.  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• The desired HDR effect may not be attained if the camera or subject moves during  
shooting.  
• Depending on shooting conditions and image composition, this BEST SHOT scene  
may not be able to produce the desired result.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
52  
 
Shooting with High Speed Night Scene (HS Night Scene)  
With High Speed Night Scene, the camera automatically detects shooting conditions.  
When you press the shutter button, the camera will record a burst of images and  
merge them in a way that minimizes image blur due to low light conditions.  
1. In the REC mode, touch “b” (BEST SHOT).  
2. Touch “HS Night Scene” scene.  
3. When you are ready to shoot, press the shutter button.  
NOTE  
• With this BEST SHOT scene, the LED light setting automatically becomes off.  
• When holding the camera by hand while shooting with this BEST SHOT scene,  
make sure that the subjects remain as still as possible as the camera shoots the  
series of images.  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• Movement of the camera while it is placed on a surface may cause erroneous  
judgment that it is hand held.  
• If surroundings are extremely dark when shooting with “HS Night Scene”, the  
camera may not be able to shoot at proper brightness due to insufficient exposure.  
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at  
“AUTO”.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
53  
 
Shooting with High Speed Anti Shake (HS Anti Shake)  
A single press of the shutter button causes the camera to record multiple images and  
automatically combine them, which reduces image blur due to camera movement.  
1. In the REC mode, touch “b” (BEST SHOT).  
2. Touch “HS Anti Shake” scene.  
3. When you are ready to shoot, press the shutter button.  
NOTE  
• With this BEST SHOT scene, the LED light setting automatically becomes off.  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• High Speed Anti Shake may not operate properly resulting in blurred images if the  
camera is moved more than the allowable range or if the subject moves during  
shooting.  
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at  
“AUTO”.  
Shooting with Priority on Subject Faces (HS Best Selection)  
With High Speed Best Selection, the camera automatically shoots a series of images,  
and selects the best one based on facial image blur, and facial expression (whether  
the subject is smiling or blinking).  
1. In the REC mode, touch “b” (BEST SHOT).  
2. Touch “HS Best Selection” scene.  
3. Press the shutter button to shoot.  
• This will cause the message “Busy... Please wait...” to appear. Do not move  
the camera while this message is displayed. The recording process takes  
some time to complete after the message appears.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
54  
   
NOTE  
• With this BEST SHOT scene, the LED light setting automatically becomes off.  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• If one or more of the faces are blurred in all of the images that are shot, they will be  
blurred in the final image as well.  
• The following conditions may make it impossible for the camera to determine if the  
subject is blinking or smiling. This may result in a final image in which the subject is  
blinking or not smiling.  
– Faces that are partially or completely darkened by shadows, etc.  
– Hair that is hiding or near the eyes  
– Eye glasses  
– Small faces  
– Faces that are not looking directly at the camera  
• Shooting a large group of people will cause processing of the image after shooting  
to take longer.  
Shooting a Panorama Image (Slide Panorama)  
With Slide Panorama, you move the camera to compose and record multiple images,  
which are then combined to a panorama. This feature lets you shoot a panorama  
which is dramatically greater than the physical capabilities of the lens.  
• The final panorama image can be one of the two sizes shown below.  
x
Slide Direction is Right or Left: Maximum 11520 1080 pixels  
x
Slide Direction is Up or Down: Maximum 1920 7296 pixels  
• Zoom operations are not supporting during Slide Panorama shooting. The zoom  
setting is fixed at full wide angle.  
• You can shoot a panorama image for approximately 360 degrees horizontally, or  
approximately 180 degrees vertically.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
55  
 
1. In the REC mode, touch “b” (BEST SHOT).  
2. Touch “s” (Slide Panorama) scene.  
3. Touch the icon for the slide direction (the  
direction the camera will move while  
shooting).  
You can select one of four different slide directions:  
“
” (right), “  
” (left), “ ” (up), “ ” (down).  
4. Point the camera at the start of the panorama  
and half-press the shutter button to allow the  
camera to focus automatically.  
5. Press the shutter button the rest of the way  
down and a slide cursor will appear on the  
monitor screen. Slowly move the camera in  
the direction indicated by the arrow on the  
screen until the slide cursor reaches the  
other end of its movement range (i.e. all the  
way to the right when moving the camera to  
the right).  
• The camera will start composing the panorama  
image internally when the slide cursor reached  
the other end of the movement range.  
• Image composing also will start automatically if  
you stop moving the camera during panorama  
Slide cursor  
shooting. After you stop moving the camera, the message “Busy... Please  
wait...” appears as the camera processes the image. Wait until this message  
disappears before using the camera. Image shooting is disabled while the  
message is displayed.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
56  
NOTE  
• The following conditions are not compatible with Slide Panorama shooting.  
– Subject whose brightness is very different from that of its surroundings due to  
artificial light, sunlight, etc.  
– Rivers, waves, waterfalls, or other subject with constantly changing patterns  
– Sky, beach, or other subject with continuous patterns  
– Camera too close to the main subject  
– Moving subject  
– Dark surroundings  
• Slide Panorama may stop part way through in the following cases.  
– Subject or camera movement  
– Camera movement that is too fast or too slow  
• Shooting a Slide Panorama image after half-pressing the shutter button to perform  
Auto Focus may not produce the desired results if there are considerable  
differences in the brightness, color, and/or focus of the individual images. If this  
happens, try changing the focus position by focusing on a different subject, etc.  
• Since a Slide Panorama image is created by joining multiple images together, there  
may be some roughness at the point where two images are joined.  
• Shooting under a flickering light source (such as fluorescent lighting) may result in  
uneven brightness and/or coloring in the final Slide Panorama image.  
• The exposure and white balance when shooting Slide Panorama images are fixed  
at the levels measured when you half-press the shutter button at the beginning of  
the operation.  
• With this BEST SHOT scene, the LED light setting automatically becomes off.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
57  
Advanced Recording Settings  
The following are menu operations you can use to configure various camera settings.  
Using the REC Menu  
. Example Menu Screen Operation  
1. In the REC mode, touch “MENU”.  
This will display the menu screen.  
• If “MENU” is not displayed on the screen, touch  
the tab to display it.  
• Menu contents are different in the REC mode  
and PLAY mode.  
2. Drag upwards and downwards until you find the item whose setting  
you want to change.  
3. Touch the item.  
4. Configure the setting of the item in accordance with the screen  
contents.  
• To cancel and exit the menu, touch “MENU” or press the shutter button.  
NOTE  
• Some menu items may not be available, depending on the recording mode being  
use.  
. Menu Operations in This Manual  
Menu operations are represented in this manual as shown below. Touch the indicated  
icons and items, and perform operations as they are indicated, from left to right.  
Procedure  
Enter the “REC Mode” * MENU * Touch Shutter  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
58  
     
Using Touch Shutter (Touch Shutter)  
Procedure  
Enter the “REC Mode” * MENU * Touch Shutter  
You can use the procedure below to shoot a snapshot.  
1. Touch “On”.  
2. Point the camera at the subject.  
3. When you want to shoot, touch the monitor screen.  
The camera automatically comes into focus and then shoots.  
• You can still use the shutter button to shoot even when “On” is selected for  
Touch Shutter.  
NOTE  
• When “Auto” is selected as the recording mode, the camera will automatically focus  
on the point you touch.  
• When “Premium Auto Pro” is selected as the recording mode, the camera will  
automatically determine the optimum focus point(s) and focus automatically.  
Using the Self-timer (Self-timer)  
Procedure  
Enter the “REC Mode” * MENU * Self-timer  
With the Self-timer, pressing the shutter button starts a timer. The shutter is released  
and the image is shot after a fixed amount of time.  
REC Screen  
Icon Display  
Setting  
10 sec  
Description  
10-second Self-timer  
2-second Self-timer  
• When shooting under conditions that slow down the  
shutter speed, you can use this setting to prevent  
image blur due to camera movement.  
2 sec  
Off  
None  
Self-timer is disabled.  
• You can interrupt an ongoing Self-timer countdown by pressing the shutter button.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
59  
   
NOTE  
• The Self-timer configured with the above menu cannot be used under the following  
conditions.  
– Slide Panorama (page 55)  
– Motion Shutter (page 43)  
– When the monitor screen and lens are facing in the same direction  
Using the LED Light (LED)  
Procedure  
Enter the “REC Mode” * MENU * LED  
Use the LED light when shooting where lighting is dim. The effectiveness of the LED  
light is reduced the further you are from the subject.  
REC Screen  
Icon Display  
Setting  
Auto  
Description  
The LED lights automatically under dark shooting  
conditions when the shutter button is half-pressed to  
focus or full-pressed to shoot.  
On  
Off  
LED always lights when shooting.  
LED never lights.  
None  
IMPORTANT!  
• Do not turn on the LED light near a person’s eyes and do not allow anyone to look  
directly into the light.  
• You should compose the image so the main subject is in the center of the image  
when using the LED light.  
• Since the camera is equipped with a wide-angle lens, the center tends to be  
brighter while the periphery tends to be darker.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
60  
 
Changing the Image Size (Image Size)  
Procedure  
Enter the “REC Mode” * MENU * Image Size  
This setting can be used to configure snapshot image size.  
Suggested Print  
Size and  
Application  
Image Size  
(Pixels)  
REC Screen  
Icon Display  
Description  
12M  
(4000 3000)  
Poster Print  
Poster Print  
A4 Print  
x
Good detail for better clarity even  
for images cropped from the  
original on a computer, etc.  
3:2  
x
(4000 2656)  
5M  
Good detail  
x
(2560 1920)  
Image files are smaller, which is  
better when attaching images to e-  
mail. However, images are  
relatively coarser.  
VGA  
(640 480)  
E-Mail  
x
• The initial factory default image size setting is 12M (12 million pixels).  
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the  
standard aspect ratio of print paper.  
• You should regard the print paper sizes suggested here as guidelines only (200 dpi  
print resolution).  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
61  
 
. Pixels and image size  
A digital camera image is a collection of small  
dots called “pixels”. The more pixels there are  
in an image, the more detail there will be.  
However, you generally can do with fewer  
pixels when printing an image (L size)  
through a print service, attaching an image to  
e-mail, when viewing the image on a  
computer, etc.  
Pixel  
The size of an image indicates how many  
x
pixels it contains, and is expressed as horizontal pixels vertical pixels.  
Example:  
Image size  
12M  
pixels  
x
4000 3000 (Approximately 12 million pixels)  
x
2560 1920 (Approximately 5 million pixels)  
5M  
• Note that larger images have more pixels, so they take up more memory space.  
• For information about image size and number of images that can be stored, see  
page 131.  
• For information about movie image size, see page 47.  
• For information about resizing existing snapshots, see page 82.  
Movie Image Quality Settings (Movie Quality)  
Procedure  
Enter the “REC Mode” * MENU * Movie Quality  
This setting can be used to configure movie image quality settings and to select either  
normal movie recording or High Speed Movie recording. For information about movie  
image quality settings, see page 47.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
62  
 
Correcting Image Brightness (EV Shift)  
Procedure  
Enter the “REC Mode” * MENU * EV Shift  
You can manually adjust an image’s exposure value (EV value) before shooting it.  
• Exposure Compensation Range: –2.0 EV to +2.0 EV  
• Unit: 1/3 EV  
1. Touch a level you want to set.  
• To cancel exposure compensation, change the EV value to 0.0.  
–2.0  
+2.0  
Decreases the EV value. A lower EV  
value is best for dark-color subjects and  
for shooting outdoors on a clear day.  
Increases the EV value. A higher EV  
value is best for light-colored subjects  
and backlit subjects.  
2. Touch “OK”.  
This applies the exposure compensation value. The exposure compensation  
value you set remains in effect until you change it or turn off the camera (which  
causes it to revert to “0.0”).  
NOTE  
• When shooting under very dark or very bright conditions, you may not be able to  
obtain satisfactory results even after performing exposure compensation.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
63  
   
Adjusting White Balance (White Balance)  
Procedure  
Enter the “REC Mode” * MENU * White Balance  
You can adjust white balance to match the source of light available where you are  
shooting and avoid the blue cast that results when shooting outdoors when it is  
cloudy, and the green cast that results when shooting under fluorescent lighting.  
1. Touch the type of white balance you want to select.  
You can see the affect of the white balance setting you select on the monitor  
screen.  
Setting  
Description  
Configures the camera to adjust white balance  
automatically  
‡
¤
'
Auto WB  
Daylight  
Overcast  
For shooting outdoors on a clear day  
For shooting outdoors on an overcast rainy day, in the  
shade, etc.  
For shooting on a clear day in the shade of trees or  
buildings  
“
†
Shade  
For shooting under white or day white fluorescent  
lighting  
Day White Fluor  
–
Daylight Fluor  
Tungsten  
For shooting under daylight fluorescent lighting  
For shooting under light bulb lighting  
«
For configuring the camera manually to suit a particular  
light source.  
Touch “· Manual WB”.  
Blank white paper  
1
2
In the location where you plan to  
shoot, point the camera at a  
blank white piece of paper so it  
fills the entire monitor screen.  
Touch an area of the screen  
where no icon is located.  
·
Manual WB  
3
The white balance setting is retained even if you turn  
off the camera.  
• When “‡ Auto WB” is selected for the white balance setting, the camera  
automatically determines the white point of the subject. Certain subject colors  
and light source conditions can cause problems when the camera tries to  
determine the white point, which makes proper white balance adjustment  
impossible. If this happens, select the white balance setting that matches your  
shooting conditions (Daylight, Overcast, etc.).  
2. Touch “OK”.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
64  
 
Specifying ISO Sensitivity (ISO)  
Procedure  
Enter the “REC Mode” * MENU * ISO  
ISO sensitivity is a measure of sensitivity to light.  
Setting  
AUTO  
Description  
Adjusts sensitivity automatically according to conditions  
Lower  
sensitivity  
Slow shutter speed  
Less noise  
ISO 100  
ISO 200  
ISO 400  
ISO 800  
ISO 1600  
ISO 3200  
Fast shutter speed (Set  
for shooting in dimly lit  
areas.)  
Some coarseness  
(increased digital noise)  
Higher  
sensitivity  
• Since higher ISO sensitivity values tend to result in digital noise in images, the  
camera performs a noise filtering process. Because of this, it may take relatively  
longer for the camera to finish recording an image after it is shot. You will not be  
able to perform any operation while image recording is in progress.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
65  
 
Selecting a Focus Mode (Focus)  
Procedure  
Enter the “REC Mode” * MENU * Focus  
Changing to a different focus mode can help to achieve better focus.  
1
Focus Mode  
Approximate Focus Range  
Snapshot Movies  
8 cm to 46 cm to  
(infinity) (infinity)  
(3.1" to (18.1" to 9)  
*
REC Screen  
Icon Display  
Settings  
Type of Shot  
Snapshot Movies  
AF  
(Auto  
Focus)  
General  
recording  
None  
9
9
9
)
Automatic  
8 cm to 50 cm 17 cm to 27 cm  
(3.1" to 19.7") (6.7" to 10.6")  
Macro  
Close ups  
Fixed  
focal point  
Shooting  
with a  
relatively  
wide focus  
range  
46 cm to  
PF (Pan  
Focus)  
Fixed  
focal point  
Fixed focal  
point*  
9
(infinity)  
2
(18.1" to  
9
)
Scenery and  
other distant  
subjects  
Infinity  
Focus  
Fixed  
Infinity (Wide Angle)  
*1 The focus range is the distance from the lens surface.  
*2 The distance depends on shooting conditions.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
66  
     
Using Focus Lock  
Subject to be focused on  
“Focus lock” is a technique you can use when you want  
to compose an image in which the subject you want to  
focus on is not within the focus frame in the center of  
the screen.  
1. Align the monitor screen’s focus frame with  
the subject you want to focus on and then  
half-press the shutter button.  
Focus frame  
2. Keeping the shutter button half-pressed  
(which maintains the focus setting), move  
the camera to compose the image.  
3. When you are ready to shoot the image,  
press the shutter button the rest of the way  
down.  
NOTE  
• Focus lock also locks exposure (AE).  
• The focus frame does not appear on the display when the Touch Shutter is  
enabled (On).  
Turning on Image Review (Review)  
Procedure  
Enter the “REC Mode” * MENU * Review  
While Review is turned on, the camera will display an image immediately after it is  
recorded.  
Type 1  
Type 2  
Off  
Displays a full-screen view of the image for about one second.  
Displays a Review image in the lower left corner of the monitor screen.  
Touching the Review image will enter the PLAY mode and display a  
full-screen view of the image.  
Turns off review image display  
• When “Type 1” is selected, the aperture, shutter speed, and ISO sensitivity, will be  
orange if the Auto Exposure is not correct.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
67  
   
Checking a Snapshot before Saving It (Self-portrait check)  
Procedure  
Enter the “REC Mode” * MENU * Self-portrait check  
Pressing the shutter button on the frame to shoot a  
self-portrait while this function is enabled (“On”), will  
display an image for review before it is saved. When  
this function is disabled (“Off”), self-portrait images are  
stored directly into memory as soon as you shoot  
them. The self-portrait check function can be used  
under the conditions described below.  
Shutter button  
Recording mode : Auto, Premium Auto Pro, Make-up  
Monitor screen : Pointed in the same direction as the lens.  
1. Touch “On”.  
2. Press the shutter button on the frame to shoot the image.  
3. Review the recorded image.  
• When this function is enabled, you can perform the following image review and  
store operations after shooting a self-portrait.  
Setting  
Description  
Zooms the review image.  
• Two-finger squeeze and spread screen operations can also be  
used to zoom the review image.  
• An enlarged image can be scrolled by dragging on the screen.  
Returns a zoomed image to its original size.  
Returns to image recording standby without saving the currently  
displayed review image.  
Saves the currently displayed review image and returns to image  
recording standby.  
• Touching “ ” while a zoomed review image is displayed still  
saves the image in normal (not zoomed) size.  
Download from Www.Somanuals.com. All Manuals Search AAnddvaDncoewd nRelocoarddi.ng Settings  
68  
   
Viewing Snapshots and Movies  
Viewing Snapshots  
See page 34 for the procedure for viewing snapshots.  
Viewing a Movie  
1. Touch “p” (PLAY) to enter the PLAY mode.  
Image quality  
Movie icon: 6  
2. Touch “ú” or “õ”, or drag left or right  
across the screen image to scroll through  
the movies until the one you want is  
displayed.  
• To scroll at high speed, touch and hold “ú” or  
“õ”.  
Movie recording time  
3. Touch “6” (Movie) to start playback.  
Playback in progress  
Playback paused  
Touch “|”.  
Touch “6”.  
Progress bar  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69  
             
Movie Playback Controls  
Pause/Play  
Touch “|” (pause) or “6” (play).  
During playback, touch “{” (fast reverse) or “}” (fast  
forward).  
• Each touch of either button increases the speed of the  
fast forward or fast reverse operation.  
• To return to normal playback speed, touch “6”.  
Fast forward/  
Fast reverse  
Stop playback  
During playback, touch “.”.  
During playback, touch “n” and then drag the volume bar  
to the desired level.  
• Volume can be adjusted only while movie playback is in  
progress.  
Volume adjustment  
While playback is paused, touch “z” or “y”.  
• Touching and holding this icon advances frames  
continuously.  
1 frame forward/  
back  
Information display  
on/off  
Touch the screen.  
Pause movie play at the location where you want to cut,  
and then touch “~” (page 71).  
Movie editing  
• Playback may not be possible for movies not recorded with this camera.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
Editing a Movie on the Camera (Movie Editing)  
The Movie Editing feature lets you cut out a specific part of a movie.  
1. Enter the PLAY mode and then start playback of the movie you want to  
edit.  
2. When playback reaches the location where you want to cut, touch “|”  
to pause.  
3. Touch “~”.  
4. Touch the option that specifies what you want to cut.  
Cuts everything from the beginning of the movie up to  
the current location.  
¡
¢
Previous Cut  
Next Cut  
Cuts everything from the current location to the end of  
the movie.  
5. Touch “Cut”.  
The selected cut operation will take considerable time to complete. Don’t try to  
perform any camera operation until the “Busy... Please wait...” message  
disappears from the monitor screen. Note that a cut operation can take a long  
time if the movie being edited is long.  
IMPORTANT!  
• When you edit a movie, only the result is saved. The original movie is not retained.  
An editing operation cannot be undone.  
NOTE  
• A movie that is shorter than five seconds cannot be edited.  
• Editing of movies recorded with a different type of camera is not supported.  
• You will not be able to edit a movie if the amount of remaining memory capacity is  
less than the size of the movie file you want to edit. If there is not enough memory  
available, delete files you no longer need to free up more.  
• Splitting of a movie into two movies and splicing of two different movies into a  
single movie are not supported.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
 
Viewing a Panorama Image  
1. Touch “p” (PLAY) to enter the PLAY mode.  
2. Touch “ú” or “õ” or drag upwards or  
downwards to display the panorama image  
you want to view.  
• To scroll at high speed, touch and hold “ú” or  
“õ”.  
3. Touch “6” to play the panorama.  
Panorama playback causes the image to scroll left, right, up, or down.  
Playback Controls  
Pause/Play  
Touch “|” (pause) or “6” (play).  
During playback, touch “.”.  
While playback is paused, drag the screen.  
Touch the screen.  
Stop playback  
Scroll the panorama image  
Information display on/off  
NOTE  
• The following functions cannot be performed on a panorama image.  
Movie Editing, Rotation  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72  
 
Viewing the Image Menu  
The image menu shows multiple images on a single screen.  
1. In the PLAY mode, touch “]”.  
This displays the image menu.  
• Touch “û” or “ü” or drag upwards or  
downwards to scroll to the next page of images.  
• To view the normal (single image) display mode,  
touch the image your want to view or touch “ë”.  
• In the case of a movie, the first image in the  
movie is displayed.  
• A question mark (?) will be displayed for images  
that cannot be displayed for some reason.  
Zooming an On-screen Image  
Snapshots can be zoomed on the monitor screen up to 8X.  
• The actual available zoom factors depend on the size of the original image.  
1. In the PLAY mode, touch “ú” or “õ” or drag left or right to display the  
image you want to view.  
2. Spread your thumb and forefinger (page 18)  
Zoom factor  
on the displayed image to enlarge it.  
Image area  
• Dragging an enlarged screen image will change  
the part of the image that is displayed.  
• Squeezing your thumb and forefinger (page 18)  
on the displayed image will reduce it in size.  
– When monitor screen contents are turned on, a  
graphic in the lower right corner of the screen  
shows what part of the zoomed image is  
currently displayed.  
• Touching “ú” or “õ” while an enlarged image is  
displayed will scroll to the next sequential image  
while maintaining the current zoom factor.  
• To return to normal (single image) display, touch  
“ë”.  
Current display area  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
73  
       
Viewing Snapshots and Movies on a TV Screen  
Use a commercially available HDMI cable to  
connect the camera to the TV.  
• Use a commercially available HDMI cable  
that is marked with the logo shown to the  
right.  
1. Open the frame (page 14).  
[CARD HDMI] cover  
2. Hook your nail into the groove of the  
[CARD HDMI] cover and pull the cover in  
the direction indicated by the arrow to  
open it.  
3. Turn off the camera and use a commercially available HDMI cable to  
connect the camera to a TV.  
HDMI connector  
HDMI input  
HDMI output (micro)  
HDMI cable  
(commercially  
available)  
HDMI micro connector  
• Make sure that the camera is turned off before plugging in or unplugging the  
cable. Check the user documentation that comes with the TV for information  
about requirements before plugging into or unplugging from the TV.  
4. Turn on the TV and select its video input mode.  
If the TV has more than one video input, select the one where the camera is  
connected.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74  
     
5. Turn on the camera.  
The camera monitor screen will shows a remote controller  
image. The TV screen will show a recorded image.  
• The contents of the remote controller image will depend on  
the type of image that is displayed on the TV screen.  
6. Touch the camera monitor screen to perform  
operations.  
NOTE  
• Use a HDMI cable with a plug that is compatible with the camera’s HDMI micro  
connector on one end, and a plug that is compatible with your TV’s HDMI  
connector on the other end.  
• Proper image and/or audio output and other operations may not be possible with  
some devices.  
• Connecting the camera to the HDMI connector of another device can damage both  
the camera and the other device. Never connect two HDMI output connectors to  
each other.  
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s  
monitor screen may not operate normally while the HDMI cable is connected.  
• Audio is monaural.  
• Audio is initially output by the camera at maximum volume. When you first start  
displaying images, set the TV volume control at a relatively low level and then  
adjust it as required.  
• To select the digital signal format, see page 107.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
Other Playback Functions (PLAY)  
The following are menu operations you can use to configure various camera settings.  
Using the PLAY Menu  
. Example Menu Screen Operation  
1. In the PLAY mode, touch “MENU”.  
This will display the menu screen.  
• If “MENU” is not displayed on the screen, touch  
the tab to display it.  
• Menu contents are different in the REC mode  
and PLAY mode.  
2. Touch the item whose setting you want to change.  
3. Configure the setting of the item in accordance with the screen  
contents.  
• To cancel and exit the menu, touch “MENU” or press the shutter button.  
. Menu Operations in This Manual  
Menu operations are represented in this manual as shown below. Touch the indicated  
icons and items, and perform operations as they are indicated, from left to right.  
Procedure  
Enter the PLAY Mode * MENU * Protect  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76  
     
Performing Paint Operations on an Image (Paint)  
Procedure  
Enter the PLAY Mode * Display snapshot * MENU * Paint  
You can use this function to draw on, write on, or stamp information into a recorded  
snapshot. If the original image size is 3M or larger, the post-paint image is saved as a  
3M size image.  
1. On the right side of the monitor screen,  
touch “ ” or “ ”.  
2. Touch the pen type or the stamp you want to  
use.  
3. Use the pen to write text or draw figures, or  
use the stamp to stamp information.  
4. Touch “OK”.  
5. Touch “Yes”.  
This will save the image as a new image.  
. Paint Functions  
Exits paint without saving an image.  
For selecting the pen color and thickness for drawing or writing. Also  
can be used to select the eraser and its thickness.  
For selecting the stamp type.  
Goes back to the previous screen.  
Saves the image.  
NOTE  
• After selecting “ ”, you can change either the color (or eraser) or thickness  
setting only. To change the other setting, select “ ” again.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
   
Playing a Slideshow on the Camera (Slideshow)  
Procedure  
Enter the PLAY Mode * MENU * Slideshow  
You can use the slideshow mode to automatically scroll through all of the images in  
camera memory.  
NOTE  
• All operations are disabled while the slideshow is transitioning from one image to  
another.  
• The time required for transition from one image to another may be longer in the  
case of an image that was not recorded with this camera.  
• To return to normal (single image) display, touch the screen.  
Extracting an Image from a Snapshot (Cut out subject)  
Procedure  
Enter the PLAY Mode * Display snapshot * MENU * Cut out subject  
You can draw an outline around a subject (person or object) and extract it from the  
snapshot. You can then insert the extracted subject into another snapshot.  
Extracted Subject  
Another Snapshot  
Final Combined Image  
1. Touch the drawing tool you want and then draw a boundary around the  
subject that you want to extract.  
Drawing Tool  
Line Type  
Thin  
Description  
•
‚
„
Draws a line for cutting out a subject.  
Erases a drawn line.  
Thick  
–
• The boundary line should be continuous, which means it starts and ends at the  
same point.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78  
     
2. Touch “OK”.  
This will cause the background of the subject you outlined to become gray.  
3. Touch “”” to select the area to be extracted and then touch “OK”.  
This will display the cut out subject.  
• To scroll back one screen, touch the “u” icon in the upper right corner of the  
display.  
”
Extracted subject screen  
Original image with subject  
extracted  
4. After confirming that the part of the image to be extracted is the way  
you want, touch “OK”.  
This saves the extracted image.  
NOTE  
• You cannot extract from an extracted subject. Attempting to do so will cause an  
error.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79  
Inserting a Subject into another Snapshot (Paste subject)  
Procedure  
Enter the PLAY Mode * MENU * Paste subject  
You can insert the camera’s built-in subject or subjects you create with “Cut out  
subject” (page 78) into snapshots.  
• Only an image that satisfies the following conditions can be used as a background  
image.  
– It must be a snapshot recorded with this camera or a snapshot transferred to this  
camera’s memory.  
– It must be an image with an aspect ratio of 4:3.  
1. Touch “ú” or “õ” or drag left or right to scroll through images. Select  
image you want to use as the background and then touch “OK”.  
2. Touch “ú” or “õ” or drag left or right to scroll though subjects. Select  
the subject you want to insert and then touch “OK”.  
3. Touch “+” (zoom in) and “–” (zoom out) to  
adjust the size of the subject. You also can  
drag the subject around the screen to  
reposition it.  
4. After the subject’s size and position are the  
way you want, touch “OK”.  
This inserts the subject into the background image.  
NOTE  
• Performing a delete or format operation will not delete the built-in subjects.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80  
   
Protecting a File Against Deletion (Protect)  
Procedure  
Enter the PLAY Mode * MENU * Protect  
You can protect images to prevent them from being  
deleted.  
• A protected image will be indicated by “›”.  
All Files On  
All Files Off  
Protects all files.  
Unprotects all files.  
Protects and unprotects specific files.  
Touch “û” or “ü” or drag upwards or downwards to display  
the image you want to protect.  
1
Touch an image to be protected,  
and “›” will appears on the  
2
image.  
You can repeat steps  
Select  
and  
1
2
as many times as necessary to  
select multiple images.  
Touch “OK”.  
3
To unprotect an image, touch it in step  
procedure to remove “›”.  
of the above  
2
IMPORTANT!  
• Note that even if a file is protected, it will be deleted if you perform the format  
operation (page 109).  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
81  
   
Rotating an Image (Rotation)  
Procedure  
Enter the PLAY Mode * MENU * Rotation  
1. Touch “ú” or “õ” or drag upwards or downwards to display the image  
you want to rotate.  
2. Touch “Rotate”.  
This will rotate the image 90 degrees to the left.  
3. When the image is in the orientation you want, touch “ ”.  
NOTE  
• Rotation of a panorama image is not supported.  
• Note that this procedure does not actually change the image data. It simply alters  
how the image is displayed on the camera’s monitor screen.  
• An image that has been protected or zoomed cannot be rotated.  
Resizing a Snapshot (Resize)  
Procedure  
Enter the PLAY Mode * MENU * Resize  
You can reduce the size of a snapshot and save the result as a separate snapshot.  
The original snapshot is also retained. You can select resize an image to one of three  
image sizes: 5M, 3M, VGA.  
1. Touch “ú” or “õ” or drag left or right to display the image you want to  
resize.  
2. Touch a size.  
This resizes the image to the selected size and saves the result as a new  
photograph.  
NOTE  
• Resizing a 3:2 size snapshot will create an image with an aspect ratio of 4:3, with  
both sides cut off.  
• The recording date of the resized version of the snapshot will be the same as the  
recording date of the original snapshot.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82  
     
Cropping a Snapshot (Trimming)  
Procedure  
Enter the PLAY Mode * MENU * Trimming  
You can crop a snapshot to trim parts you do not need, and save the result in a  
separate file. The original snapshot is also retained.  
1. Touch “ú” or “õ” or drag left or right to display the image you want to  
crop.  
2. Touch “OK”.  
3. Drag the image until the part you want to  
Zoom factor  
keep is displayed.  
Represents  
snapshot area  
• To enlarge the image, touch “+”, or touch the  
screen with your thumb and forefinger and then  
spread them apart. To reduce the size of the  
image, touch “–”, or touch the screen with your  
thumb and forefinger and then squeeze them  
together.  
4. Touch “OK”.  
This will crop the image, leaving only the displayed  
Part of snapshot that is  
currently displayed  
part.  
NOTE  
• The image produced by cropping a 3:2 image will have an aspect ratio of 4:3.  
• The recording date of the cropped image will be the same as the recording date of  
the original snapshot.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
83  
 
Establishing a Wireless LAN Connection  
Wireless LAN Functions  
Establishing a wireless LAN connection between the camera and a smartphone  
enables the functions described below.  
See  
page:  
With this function:  
You can do this:  
Remote Capture*  
Remotely control and shoot with the  
camera using a smartphone.  
86  
88  
89  
91  
Quick Send*  
Send a snapshot that was just recorded  
with the camera to a smartphone.  
Send to phone*  
Send snapshots and movies recorded  
with your camera to your smartphone.  
View on phone  
Use a smartphone or computer to view  
and download snapshots and movies  
stored in camera memory.  
* Requires installation of the EXILIM Remote app on your smartphone.  
IMPORTANT!  
• Never use wireless LAN functions inside an aircraft or anywhere else where such  
operation is restricted.  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
84  
     
NOTE  
• Note that using wireless LAN functions requires more battery power usage than  
normal. Make sure that the camera battery is sufficiently charged before starting a  
wireless LAN operation.  
• The operating range depends on the local communication environment and on the  
type of smartphone you are connected to.  
Establishing a Connection between a Smartphone and Your  
Camera  
Installing the EXILIM Remote Smartphone app on your smartphone makes it possible  
to remotely control the camera from your smartphone and to send images recorded  
with the camera to your smartphone. For information about how to install and operate  
EXILIM Remote, see the User’s Guide or visit the official Exilim remote Website  
(http://www.casio.com.cn/dc/app/).  
. App operation guarantees  
No guarantees are made concerning the ability to operate the EXILIM Remote app on  
any particular smartphone or tablet.  
Installing the EXILIM Remote App on Your Smartphone  
. Android terminal (Supported Versions: Android 2.3.3 to 4.2)  
Visit the Exilim remote Website at the URL provided above.  
. iPhone (Supported Versions: iOS 5.1 to 6.1)  
Visit the Exilim remote Website at the URL provided above.  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
85  
   
Configuring Wireless LAN Settings  
Use the procedure below to establish a wireless LAN connection between the camera  
and a smartphone for the first time. This operation is required for the first connection  
only.  
1. On your camera, enter the REC mode and  
then touch the “ ” (Remote Capture) icon.  
• If the “ ” (Remote Capture) icon is not  
displayed on the screen, touch the tab to display  
it.  
This will enable connection with a smartphone and  
the camera will display a screen for input of an  
SSID and password.  
password  
SSID  
2. For the smartphone Wi-Fi setting, input the  
camera SSID and password.  
When the message “Start up the phone app.”  
appears on the camera’s monitor screen, it means that the smartphone has  
established a wireless connection with the camera.  
• To break the wireless connection, touch “Cancel”.  
• What you need to do to establish a wireless LAN connection depends on the  
type of smartphone you are using. For details about how to establish a wireless  
LAN connection see the user documentation that comes with your smartphone.  
Using a Smartphone as a Camera Remote Controller  
(Remote Capture)  
This function lets you remotely shoot a snapshot or movie with the camera using a  
smartphone. You also can perform remote zoom, self-timer, and other operations as  
well.  
1. On your camera, enter the REC mode and then touch the “ ” (Remote  
Capture) icon.  
• If the “ ” (Remote Capture) icon is not displayed on the screen, touch the tab  
to display it.  
2. On your smartphone, start up the EXILIM Remote app.  
This will establish a connection between the smartphone and your camera.  
• About 60 seconds after your camera establishes a connection with the  
smartphone, the camera’s monitor screen will go blank and its back lamp will  
light green.  
• If the message “Connect your phone to the access point below.” remains on  
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your  
camera is selected for connection (page 86).  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
86  
       
3. Compose the image on your smartphone’s screen as you shoot.  
• After you are finished using Remote Capture, touch “Exit” on the camera or exit  
the app on your smartphone.  
IMPORTANT!  
• For snapshots, Premium Auto Pro is automatically selected as the recording mode  
while shooting with Remote Capture. You cannot shoot with BEST SHOT or other  
recording modes.  
x
• The Movie Quality is always STD (640 480) when shooting with Remote Capture.  
. Controlling Your Camera with a Smartphone  
EXILIM Remote supports the Remote Capture operations listed below. This manual  
explains EXILIM Remote operations based on screens that appear using the iPhone  
version. Some operations may differ depending on your smartphone type.  
Exits Remote Capture.  
Select to configure self-timer and LED light  
settings for snapshot shooting.  
1
2
1
bk  
2
3
The Remote Capture self-timer countdown time is  
10 seconds (fixed).  
Displays current LED light settings.  
Displays what is being picked up by the camera’s  
lens.  
4
3
4
9
8
7
Performs a zoom operation.  
5
6
5
6
7
8
Toggles between snapshot and movie shooting.  
Shoot a snapshot or start movie recording.  
Sends the snapshot that was just recorded to the  
smartphone.  
Displays location information settings.  
Displays current self-timer settings.  
9
bk  
Location Information  
You can use  
to add location information to snapshots shot with Remote Capture  
8
when they are sent to a smartphone. On an Android terminal, select  
the Remote Capture screen. On an iPhone, perform the following operation:  
“Options” on  
2
“Settings” * “Privacy” * “Location Services”.  
IMPORTANT!  
• Enabling location-based services causes the recording date, location information,  
and other personally identifiable information to be included in the snapshot data.  
Take care when sharing or publishing such images on web services, etc.  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
87  
Sending a Just-recorded Snapshot to a Smartphone  
(Quick Send)  
You can use Quick Send to send a snapshot you just recorded with the camera to a  
smartphone.  
• Note that you will not be able to use Quick Send to send a snapshot to a  
smartphone if you performed any one of the operations below after recording the  
snapshot.  
– Exiting the REC mode to the PLAY mode or turning off the camera  
– Resetting the camera (page 109) or formatting camera memory (page 109)  
– Selecting Remote Capture  
– Performing a movie recording operation  
1. On the camera, enter the REC mode and shoot the snapshot.  
2. Touch the “ ” (Quick Send) icon.  
3. Touch “Send”.  
4. On your smartphone, start up the EXILIM Remote app.  
This will establish a connection between your camera and the smartphone, and  
send the snapshot you just recorded to the smartphone.  
• If the message “Connect your phone to the access point below.” remains on  
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your  
camera is selected for connection (page 86).  
5. After image send is complete, tap “OK” on your smartphone.  
The connection between your camera and the smartphone will be terminated  
automatically after the send operation is complete.  
NOTE  
• You can specify the size of the image sent to the smartphone using “Resize before  
send” (page 90).  
• You can use the smartphone apps below to view snapshots after sending them.  
– iPhone: Camera Roll  
– Android terminal: Gallery or another photo browser app  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
88  
   
Sending a Snapshot or Movie File from Camera Memory to a  
Smartphone (Send to phone)  
You can select one more snapshot and/or movie file in camera memory and send it to  
a smartphone. You can select up to 100 files, totaling no more than 500MB for a  
single send.  
1. On the camera, touch “p” (PLAY) to enter the PLAY mode.  
2. Touch the “ ” (Image Send) icon.  
• If the “ ” (Image Send) icon is not displayed on the screen, touch the tab to  
display it.  
3. Touch “ ” (Send to phone).  
4. Touch the images of the files you want to send to the smartphone.  
Touching the image of a file causes its check box to become selected.  
5. After selecting the images of all of the files you want to send to the  
smartphone, touch “OK”.  
6. On your smartphone, start up the EXILIM Remote app.  
This will establish a connection between your camera and the smartphone, and  
send the files to the smartphone.  
• If the message “Connect your phone to the access point below.” remains on  
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your  
camera is selected for connection (page 86).  
7. After image send is complete, tap “OK” on your smartphone.  
The connection between your camera and the smartphone will be terminated  
automatically after the send operation is complete.  
IMPORTANT!  
• Some smartphone models may not be able to play back movie files.  
• Depending on your smartphone model, its operating system version, and/or its  
remaining storage capacity can cause failure of a movie or snapshot save  
operation. After send operation, perform the required operation on your  
smartphone to ensure that the movie or snapshot was saved properly.  
• Viewing a movie received on an Android terminal:  
Note that movies are not displayed by Gallery. Movies are stored in a folder named  
“EXILIM Remote”. A separate movie player is required to playback movies (whose  
files have the file name extension MOV). Depending on your movie player, you  
may not be able to playback movies and/or audio.  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
89  
   
NOTE  
• You can specify the size of the snapshots sent to the smartphone using “Resize  
before send” (page 90).  
• You can use the smartphone apps below to view snapshots after sending them.  
– iPhone: Camera Roll  
– Android terminal: Gallery or another photo browser app  
Resizing Snapshots before Sending Them to a Smartphone  
(Resize before send)  
Procedure  
MENU * Setup * Resize before send  
This feature can be use to resize snapshots before they are sent to a smartphone  
using “Quick Send”, “Remote Capture”, or “Send to phone”.  
Original  
3M  
Images are sent in the size they were originally recorded.  
Images are converted to 3M size before being sent.  
• If an original image is 3M size or smaller, it is sent without  
resizing.  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
90  
 
Viewing Snapshots and Movies in Camera Memory on a  
Smartphone (View on phone)  
You can use this function to enable up to eight smartphones and/or computers to  
access snapshots and movies in camera memory for viewing and download. A  
smartphone does not need to have the EXILIM Remote app installed in order to  
access camera images using this function.  
1. On the camera, touch “p” (PLAY) to enter the PLAY mode.  
2. Touch the “ ” (Image Send) icon.  
• If the “ ” (Image Send) icon is not displayed on the screen, touch the tab to  
display it.  
3. Touch “ ” (View on phone).  
This establishes a connection between the smartphone and camera, and displays  
a URL.  
• If the message “Connect your phone to the access point below.” remains on  
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your  
camera is selected for connection (page 86).  
• After about 60 seconds, the camera’s monitor screen will go blank. Touching  
the monitor screen will cause its image to reappear.  
4. On the smartphone, start up its browser app.  
• The browser will automatically access the URL displayed by the camera in  
step 3 of this procedure, and then display an image stored in camera memory.  
• If no camera image appears automatically,  
manually input the URL into the browser.  
• To exit the wireless LAN function, touch “Exit” on  
the camera’s monitor screen.  
URL  
IMPORTANT!  
• Some smartphone models may not be able to play back movie files.  
NOTE  
• You can also view image in camera memory on a computer’s browser by  
establishing a wireless LAN connection with the computer.  
Download from Www.Somanuals.com. All Manuals SEesatarbclhishAinngda WDiroewlesnsloLAaNd.Connection  
91  
   
Printing  
Professional Print Service  
You can take a memory card that contains the images you want  
to print to a professional print service and have them printed.  
Printing on a Home Printer  
You can use a printer equipped with a memory card slot  
to print images directly from a memory card. For details,  
see the user documentation that comes with your  
printer.  
Printing with a Computer  
After transferring the images to your computer, use  
commercially available software to print.  
Printing with a Computer  
There are a variety of different ways to print images stored on a computer. This  
section shows one standard printing example.  
. Printing on a Windows Computer  
1. Use the procedure under “Viewing and Storing Images on a Computer”  
(page 95) to store the image you want to print, and then display the  
image on your computer screen.  
2. Windows XP users: Click “File” and then “Print”.  
Windows 8, Windows 7, Windows Vista users: Click “Print” and then  
“Print”.  
3. Configure the desired print settings and then print.  
Windows XP users: Follow the instructions on the print wizard that appears  
configure settings and then print.  
Windows 8, Windows 7, Windows Vista users: Configure print settings and then  
click “Print”.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
92  
   
. Printing on a Macintosh  
1. Use the procedure under “Connecting the Camera to Your Computer  
and Saving Files” (page 98) to store the image you want to print, and  
then display the image on your Macintosh screen.  
2. Click “File” and then “Print”.  
3. Configure print settings and then click “Print”.  
This will print the selected image.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
93  
Using the Camera with a Computer  
Things you can do using a computer...  
You can perform the operations described below while the camera is connected to a  
computer.  
Save images to a  
computer and  
• Save images and view them manually  
(USB connection) (pages 95, 98).  
view them there  
Play back and  
edit movies  
• You can play back movies (pages 97,  
100).  
• To edit movies, use commercially  
available software as required.  
The procedures you need to perform are different for Windows and the Macintosh.  
• Windows users should refer to “Using the Camera with a Windows Computer”  
on page 94.  
• Macintosh users should refer to “Using the Camera with a Macintosh” on page  
98.  
Using the Camera with a Windows Computer  
When you  
want to do  
this:  
Operating  
System Version  
See  
page:  
Install this software:  
Save images  
Windows 8,  
to a computer Windows 7,  
and view them Windows Vista,  
there manually Windows XP (SP3)  
Installation not required.  
95  
97  
Windows 8,  
Movies can be played back using  
QuickTime 7.  
• You need to download QuickTime 7 on  
the Web if you want to use it.  
Windows 7,  
Windows Vista,  
Play movies  
Windows XP (SP3)  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
94  
     
Viewing and Storing Images on a Computer  
You can connect the camera to your computer in order to view and store images  
(snapshot and movie files).  
Never use your computer to modify, delete, move, or rename any image files  
that are in the camera’s built-in memory or on its memory card.  
Doing so can cause problems with the camera’s image management data, which  
will make it impossible to play back images on the camera and can drastically alter  
remaining memory capacity. Whenever you want to modify, delete, move, or  
rename an image, do so only on images that are stored on your computer.  
IMPORTANT!  
• Never unplug the USB cable, or operate the camera while viewing or storing  
images. Doing so can cause data to become corrupted.  
NOTE  
• You also can use your computer’s card slot (if it has one) or a commercially  
available card reader to access image files directly from the camera’s memory  
card. For details, see the user documentation that comes with your computer.  
. To connect the camera to your computer and save files  
1. Turn off the camera and then  
[USB] port  
use the micro USB cable that  
USB  
comes with the camera to  
connect it to your computer.  
• For details about connecting to  
the camera and precautions  
when connecting, see page 23.  
Micro USB cable  
(included with camera)  
2. Turn on the camera.  
• The first time you connect the camera to your computer with the USB cable, an  
error message may appear on your computer. If this happens, disconnect and  
then reconnect the USB cable.  
3. Windows 8 users: Click “Desktop” and then “Explorer”.  
Windows 7, Windows Vista users: Click “Start” and then “Computer”.  
Windows XP users: Click “Start” and then “My Computer”.  
4. Double-click “Removable Disk”.  
• Your computer recognizes the memory card loaded in the camera (or built-in  
memory if there is no card) as a removable disk.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95  
   
5. Right-click the “DCIM” folder.  
6. On the shortcut menu that appears, click “Copy”.  
7. Windows 8 users: Click “Documents”.  
Windows 7, Windows Vista users: Click “Start” and then “Documents”.  
Windows XP users: Click “Start” and then “My Documents”.  
• If you already have a “DCIM” folder in “Documents” (Windows 8, Windows 7,  
Windows Vista) or “My Documents” (Windows XP), the next step will overwrite  
it. If you want to keep the existing “DCIM” folder, you need to change its name  
or move it to a different location before performing the next step.  
8. Windows 8 users: On the “Documents” menus, click “Home” and then  
“Paste”.  
Windows 7 users: On the “Documents” “Organize” menu, select  
“Paste”.  
Windows Vista users: On the “Documents” “Edit” menu, select  
“Paste”.  
Windows XP users: On the “My Documents” “Edit” menu, select  
“Paste”.  
This will paste the “DCIM” folder (and all the image files it contains) into your  
“Documents” (Windows 8, Windows 7, Windows Vista) or “My Documents”  
(Windows XP) folder. You now have a copy of the files that are in camera  
memory on your computer.  
9. After you finish copying images, disconnect the camera from the  
computer.  
On the camera, press [p] (Power) to turn off the camera. After checking to make  
sure that the back lamp is unlit or lit red, disconnect the USB cable.  
. To view images you copied to your computer  
1. Double-click the copied “DCIM” folder to open it.  
2. Double-click the folder that contains the images you want to view.  
3. Double-click the image file you want to view.  
• For information about file names, see “Memory Folder Structure” on page 102.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
96  
Playing Movies  
To play back a movie, first copy it to your computer and then double-click the movie  
file. Some operating systems may not be able to play back movies. If this happens,  
you need to install separately available software.  
• If you are unable to play back movies, go to the URL below to download  
QuickTime 7 and install it on your computer.  
http://www.apple.com/quicktime/  
. Minimum Computer System Requirements for Movie Playback  
The minimum system requirements described below are necessary to play back  
movies recorded with this camera on a computer.  
Operating System : Windows 8, Windows 7, Windows Vista, Windows XP (SP3)  
CPU  
: Image Quality “Full HD”, “HD”:  
Core 2 Duo 3.0GHz or higher  
Image Quality “HS240”:  
Pentium 4 2.0GHz or higher  
Required Software: QuickTime 7  
• The above are recommended system environments. Configuring one of these  
environments does not guarantee proper operation.  
• Certain settings and other installed software may interfere with proper playback of  
movies.  
. Movie Playback Precautions  
• Be sure to move the movie data to the hard disk of your computer before trying to  
play it. Proper movie playback may not be possible for data accessed over a  
network, from a memory card, etc.  
• Proper movie playback may not be possible on some computers. If you experience  
problems, try the following.  
– Quit any other applications you have running, and stop resident applications.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
97  
 
Using the Camera with a Macintosh  
When you want to do Operating System  
See  
page:  
Install this software:  
this:  
Version  
Save images to your  
Macintosh and view  
them there manually  
OS X  
Installation not required.  
98  
–
Save images to your  
Macintosh  
automatically/Manage  
images  
Use iPhoto, which comes  
bundled with some  
Macintosh products.  
OS X  
OS X  
You can playback with  
QuickTime, which comes  
bundled with your operating  
system.  
Play movies  
100  
Connecting the Camera to Your Computer and Saving Files  
Never use your computer to modify, delete, move, or rename any image files  
that are in the camera’s built-in memory or on its memory card.  
Doing so can cause problems with the camera’s image management data, which  
will make it impossible to play back images on the camera and can drastically alter  
remaining memory capacity. Whenever you want to modify, delete, move, or  
rename an image, do so only on images that are stored on your computer.  
IMPORTANT!  
• Never unplug the USB cable, or operate the camera while viewing or storing  
images. Doing so can cause data to become corrupted.  
• The camera does not support operation with Mac OS X 10.0. Operation is  
supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, 10.7, and 10.8 (using the  
OS standard USB driver) only.  
NOTE  
• You also can use your computer’s card slot (if it has one) or a commercially  
available card reader to access image files directly from the camera’s memory  
card. For details, see the user documentation that comes with your computer.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
98  
   
. To connect the camera to your computer and save files  
1. Turn off the camera and then  
[USB] port  
use the micro USB cable that  
comes with the camera to  
connect it to your Macintosh.  
USB  
• For details about connecting to  
the camera and precautions  
when connecting, see page 23.  
Micro USB cable  
(included with camera)  
2. Turn on the camera.  
• The camera’s back lamp will light green or amber at this time. In this mode,  
your Macintosh recognizes the memory card loaded in the camera (or the  
camera’s built-in memory if it does not have a memory card loaded) as a drive.  
The appearance of the drive icon depends on the Mac OS version you are  
using.  
• The first time you connect the camera to your Macintosh with the USB cable,  
an error message may appear on your computer. If this happens, disconnect  
and then reconnect the USB cable.  
3. Double-click the camera’s drive icon.  
The camera’s back lamp will light green at this time. In this mode, your Macintosh  
recognizes the memory card loaded in the camera (or the camera’s built-in  
memory if it does not have a memory card loaded) as a drive. The appearance of  
the drive icon depends on the Mac OS version you are using.  
4. Drag the “DCIM” folder to the folder to which you want to copy it.  
5. After the copy operation is complete, drag the drive icon to Trash.  
6. Disconnect the camera from the computer.  
On the camera, press [p] (Power) to turn off the camera. After checking to make  
sure that the back lamp is unlit or lit red, disconnect the USB cable.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
99  
 
. To view copied images  
1. Double-click the camera’s drive icon.  
2. Double-click the “DCIM” folder to open it.  
3. Double-click the folder that contains the images you want to view.  
4. Double-click the image file you want to view.  
• For information about file names, see “Memory Folder Structure” on page 102.  
• An image that was rotated on the camera will be displayed on your Macintosh  
screen in its original (unrotated) orientation.  
Playing a Movie  
You can use QuickTime, which comes bundled with your operating system, to play  
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh  
and then double-click the movie file.  
. Minimum Computer System Requirements for Movie Playback  
The minimum system requirements described below are necessary to play back  
movies recorded with this camera on a computer.  
Operating System : Image Quality “Full HD”: Mac OS X 10.4.11 or higher  
Image Quality “HD”, “HS240”: Mac OS X 10.3.9 or higher  
Required Software: QuickTime 7 or higher  
• The above are recommended system environments. Configuring one of these  
environments does not guarantee proper operation.  
• Certain settings and other installed software may interfere with proper playback of  
movies.  
. Movie Playback Precautions  
Proper movie playback may not be possible on some Macintosh models. If you  
experience problems, try the following.  
– Upgrade to the latest version of QuickTime.  
– Shut down other applications that are running.  
IMPORTANT!  
• Be sure to move the movie data to the hard disk of your Macintosh before trying to  
play it. Proper movie playback may not be possible for data accessed over a  
network, from a memory card, etc.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100  
 
Files and Folders  
The camera creates a file each time you shoot a snapshot, record a movie, or  
perform any other operation that stores data. Files are grouped by storing them in  
folders. Each file and folder has its own unique name.  
• For details about how folders are organized in memory, see “Memory Folder  
Structure” (page 102).  
Name and Maximum Number Allowed  
Example  
File  
Each folder can contain up to 9999 files named 26th file name:  
CIMG0001 through CIMG9999. The extension  
CIMG0026.JPG  
on the file name depends on the file type.  
Extension  
Serial number (4 digits)  
Folders  
Folders are named from 100CASIO to  
100th folder name:  
999CASIO.  
100CASIO  
There can be up to 900 folders in memory.  
Serial number (3 digits)  
• You can view folder and file names on your computer. For details about how file  
names are displayed on the camera’s monitor screen, see page 10.  
• The total number of folders and files allowed depends on the image size and  
quality, and capacity of the memory card being used for storage.  
Memory Card Data  
The camera stores images you shoot in accordance with the Design Rule for Camera  
File System (DCF).  
. About DCF  
The following operations are supported for DCF-compliant images. Note, however,  
that CASIO makes no performance guarantees concerning these operations.  
• Transferring this camera’s DCF-compliant images to another manufacturer’s  
camera and view them.  
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.  
• Transferring another camera’s DCF-compliant images to this camera and view  
them.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
101  
     
. Memory Folder Structure  
DCIM Folder  
Recording Folder  
Image File  
DCIM  
100CASIO  
CIMG0001.JPG  
CIMG0002.MOV  
Movie File  
101CASIO  
102CASIO  
Recording Folder  
Recording Folder  
. Supported Image Files  
• Image files shot with this camera  
• DCF-compliant image files  
This camera may not be able to display an image, even if it is DCF-compliant. When  
displaying an image recorded on another camera, it may take a long time for the  
image to appear on this camera’s monitor screen.  
. Built-in Memory and Memory Card Data Handling Precautions  
• Whenever copying memory contents to your computer, you should copy the DCIM  
folder and all of its contents. A good way to keep track of multiple DCIM folders it to  
change their names to dates or something similar after you copy them to your  
computer. If you later decided to return a DCIM folder to the camera, however, be  
sure to change its name back to DCIM. The camera is designed to recognize only a  
root file with the name DCIM. Note the camera also will not be able to recognize the  
folders inside the DCIM folder unless they have the names they originally had  
when you copied them from the camera to your computer.  
• Folders and files must be stored in accordance with the “Memory Folder Structure”  
shown on page 102 in order for the camera to be able to recognize them correctly.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
102  
 
Other Settings (Set Up)  
This section explains menu items that you can use to configure settings and perform  
other operations in both the REC mode and PLAY mode.  
For information about menu operations, see page 58.  
Adjusting Monitor Screen Brightness (Screen)  
Procedure  
MENU *Setup *Screen  
You can use the following procedure to change the brightness of the monitor screen.  
With this setting, the camera detects available light levels and  
Auto  
automatically adjusts the brightness of the monitor screen accordingly.  
Brightness that is greater than +1, which makes the screen easier to view.  
This setting consumes more power.  
+2  
+1  
0
Bright setting for outdoor use, etc. Brightness that is greater than 0.  
Normal monitor screen brightness for indoor use, etc.  
Screen brightness for viewing in a dark environment without disturbing  
others around you.  
–1  
Automatically Orienting the Monitor Screen Contents to Match  
Camera Orientation (Auto rotate)  
Procedure  
MENU *Setup *Auto rotate  
When “On” is selected for Auto rotate, the orientation of icons and monitor screen  
image is automatically changed to match the orientation of the camera.  
Resizing Snapshots before Sending Them to a Smartphone  
(Resize before send)  
Procedure  
MENU *Setup *Resize before send  
See page 90 for details.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
103  
         
Configuring Camera Sound Settings (Sounds)  
Procedure  
MENU *Setup *Sounds  
Startup  
Half Shutter  
Toggles the operation tone between on and off.  
Shutter  
Operation  
Operation Specifies the sound volume. This volume setting is also  
Vol  
used during video output (from the HDMI port) (page 74).  
Volume  
Specifies the volume of movie audio output. This volume  
setting is also used during video output (from the HDMI  
port) (page 74).  
Playback  
Vol  
• Setting a volume level of 0 mutes output.  
Time Stamping Snapshots (Timestamp)  
Procedure  
MENU *Setup *Timestamp  
You can configure the camera to stamp the recording date only, or date and time in  
the lower right corner of each snapshot.  
• Once date and time information is stamped into a snapshot, it cannot be edited or  
deleted.  
Example: July 10, 2015, 1:25 p.m.  
Date  
2015/7/10  
Date & Time  
Off  
2015/7/10 1:25pm  
No stamping of date and/or time  
• Even if you do not stamp the date and/or time with Timestamp, you can do so later  
using some printing application.  
• Stamping is performed in accordance with the date and time settings (page 106)  
and the display style settings (page 106).  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
104  
   
Configuring World Time Settings (World Time)  
Procedure  
MENU *Setup *World Time  
Setting a Travel Destination  
You can use the World Time screen to view the current time in a zone that is different  
from your Home City when you go on a trip, etc. World Time displays the current time  
in 162 cities in 32 time zones around the globe.  
1. Touch “Destination”.  
• To change the geographic area and city for the time where you normally use  
the camera, select “Home”.  
2. Touch “City”.  
• To specify summer time for the destination city, select “DST” and then select  
the “On” setting (Summer time is used in some geographical areas to advance  
the current time setting by one hour during the summer months).  
3. Drag upwards and downwards to display the area of the destination  
city and then touch “OK”.  
4. Drag upwards and downwards until you find the city you want, and  
then touch to select it.  
IMPORTANT!  
• Before configuring World Time settings, make sure that the Home City setting is  
the place where you live or normally use the camera. If it isn’t, select “Home” on the  
screen in step 1 and configure the Home City, date, and time settings as required  
(page 106).  
Selecting the Time Display  
Use this procedure to specify the time displayed by the camera for your home city  
and destination.  
1. Touch “Time”.  
2. Touch “Home” or “Destination”.  
This will configure the time setting of the location you touched in the previous  
step.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
105  
     
Setting the Camera’s Clock (Adjust)  
Procedure  
MENU *Setup *Adjust  
1. Touch the value you want to change (year,  
month, day, hour, minute).  
2. Touch “8” or “2” to change the currently  
selected value.  
• You can specify a date from 2001 to 2049.  
• Be sure to select your Home City (page 105)  
before setting the time and date. If you set the  
time and date while the wrong city is selected for  
your Home City, the times and dates of all of the  
World Time cities (page 105) will be wrong.  
12/24 hour switch icon  
• To switch between 12-hour and 24-hour format, touch the 12/24 hour switch  
icon.  
• Touching and holding “8” or “2” scrolls at high speed.  
3. Touch “OK”.  
Specifying the Date Style (Date Style)  
Procedure  
MENU *Setup *Date Style  
You can select from among three different styles for the date.  
Example: July 10, 2015  
YY/MM/DD  
DD/MM/YY  
MM/DD/YY  
15/7/10  
10/7/15  
7/10/15  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
106  
     
Specifying the Display Language (Language)  
Procedure  
MENU *Setup *Language  
. Specify the display language you want.  
1. On the menu screen, touch “Setup”.  
2. Touch “Language”.  
3. Drag upwards and downwards until you find  
the language you want, and then touch to  
select it.  
• Camera models sold in certain geographic areas may not support display language  
selection.  
Selecting the HDMI Terminal Output Method (HDMI)  
Procedure  
MENU *Setup *HDMI  
Use this setting to select the digital signal format when connecting to a TV with an  
HDMI cable.  
This setting will cause the format to change automatically in accordance  
with the connected TV. Normally, you should use this mode.  
Auto  
1080i  
480p  
576p  
1080i format output*  
480p format output  
576p format output  
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required  
output method may be 576p when outputting to a digital TV in a PAL reception area  
that does not support 1080i 60i. If you are in a PAL reception area and nothing is  
displayed automatically, change the setting to 576p.  
• If an image does not appear when “Auto” is selected as the output method, try  
changing this setting to something else.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
107  
     
Changing the Camera Password for Wireless LAN Connection  
(WLAN password)  
Procedure  
MENU *Setup *WLAN password  
Use procedure to change the password you used when establishing a wireless LAN  
connection between the camera and a smartphone.  
1. Touch the password digit you want to change.  
2. Touch “8” and “2” to change the currently selected digit.  
3. When the password is the way you want, touch “OK”.  
NOTE  
• Note that after changing the wireless LAN password on the camera, you will also  
need to change the Wi-Fi settings of the smartphone.  
– iPhone:  
Tap the right arrow of the field where the SSID of the camera is displayed in the  
Wi-Fi settings to delete network settings. After deleting, select the camera SSID  
again and input the new password.  
– Android terminal:  
Touch the field where the SSID of the camera is displayed in the Wi-Fi settings  
and select Forget. Select the camera SSID again and input the new password.  
Displaying a Startup Screen at Power On (Startup)  
Procedure  
MENU *Setup *Startup  
Selecting “On” for Startup causes a built-in startup screen to appear on the monitor  
screen whenever the camera is turned on.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
108  
   
Formatting Built-in Memory or a Memory Card (Format)  
Procedure  
MENU *Setup *Format  
If a memory card is loaded in the camera, this operation will format the memory card.  
It will format built-in memory if no memory card is loaded.  
• The format operation will delete all contents on the memory card or in built-in  
memory. It cannot be undone. Make sure you do not need any data currently on  
the card or in built-in memory before you format it.  
• Formatting built-in memory or a memory card will delete all protected images  
stored there.  
• Check the battery level before starting a format operation and make sure it is not  
too low. Formatting may not be performed correctly and the camera may stop  
operating normally if the camera powers down while formatting is in progress.  
Resetting the Camera to Factory Defaults (Reset)  
Procedure  
MENU *Setup *Reset  
See page 124 for details about the camera’s factory default settings.  
The settings below are not reset.  
World Time settings, clock settings, date style, screen language, WLAN password  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
109  
       
Appendix  
Safety Precautions  
DANGER  
*
This symbol indicates information that, if ignored or applied incorrectly, creates the  
danger of death or serious personal injury.  
WARNING  
*
This indication stipulates matters that have the risk of causing death or serious injury  
if the product is operated incorrectly while ignoring this indication.  
CAUTION  
*
This indication stipulates matters that have the risk of causing injury as well as  
matters for which there is the likelihood of occurrence of physical damage only if the  
product is operated incorrectly while ignoring this indication.  
Symbol Examples  
This circle with a line through it (-) means that the indicated action must not  
be performed. Indications within or nearby this symbol are specifically  
prohibited. (The example at left indicates that disassembly is prohibited.)  
!
The black dot (0) means that the indicated action must be performed.  
Indications within this symbol are actions that are specifically instructed to be  
performed. (The example at left indicates that the power plug must be  
unplugged from the electrical socket.)  
$
DANGER  
*
. Rechargeable Battery  
• To charge the battery, use only the method specifically described in this  
+
manual. Attempting to charge the battery by an unauthorized means  
creates the risk of battery overheating, fire, and explosion.  
• Do not expose or immerse the battery in fresh water or salt water. Doing  
%
so can damage the battery, and cause deterioration of its performance  
and loss of service life.  
• The battery is intended for use with a CASIO Digital Camera only. Use  
+
with any other device creates the risk of the battery damage, or  
deterioration of battery performance and service life.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
110  
   
DANGER  
*
• Failure to observe any of the following precautions creates the risk of battery  
overheating, fire, and explosion.  
– Never use or leave the battery near open flame.  
-
– Do not expose the battery to heat or fire.  
– Make sure the battery is oriented correctly when charging it.  
– Never carry or store the battery together with items that can conduct electricity  
(necklaces, pencil lead, etc.).  
– Never disassemble the battery, pierce it with a needle, or expose it to strong  
impact (hit it with a hammer, step on it, etc.), and never apply solder to it.  
Never place the battery into a microwave oven, dehumidifier, high-pressure  
generating device, etc.  
– Never remove the outer sticker from the battery.  
• Should you ever notice leakage, strange odor, heat generation,  
+
discoloration, deformation, or any other abnormal condition while using,  
charging, or storing a battery, immediately remove it from the camera  
and keep it away from open flame. Also, do not use the affected battery after the  
abnormal symptoms disappear.  
• Do not use or leave the battery under direct sunlight, in an automobile  
-
parked in the sun, or in any other area subject to high temperatures.  
Doing so can damage the battery, and cause deterioration of its  
performance and loss of service life. Also, these conditions can cause the  
battery to swell to the point that you may not be able to remove it.  
• Battery fluid can damage your eyes. Should battery fluid get into your  
+
eyes accidentally, immediately rinse them with clean tap water and then  
consult a physician.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
111  
WARNING  
*
. Smoke, abnormal odor, overheating, and other abnormalities  
• Continued use of the camera while it is emitting smoke or strange odor,  
$
or while it is overheating creates the risk of fire and electric shock.  
Immediately perform the following steps whenever any of the above  
symptoms are present.  
1. Turn off the camera.  
2. If you are using the USB-AC adapter to power the camera, unplug the power  
plug from the power outlet. Also, remove the battery from the camera, taking  
care to protect yourself against burn injury.  
3. Contact your retailer or nearest CASIO authorized service center.  
. Keep Away From Fire  
• Never expose the camera to fire, which can cause it to explode and  
-
creates the risk of fire and personal injury.  
. Avoid Use While In Motion  
• Never use the camera to record or play back images while operating an  
-
automobile or other vehicle, or while walking. Looking at the monitor  
while in motion creates the risk of serious accident.  
. LED Light  
• Never use the LED light while it is pointed in the direction of a person  
-
operating a motor vehicle. Doing so can interfere with the driver’s vision  
and create the risk of accident.  
. USB-AC Adapter  
• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to  
observe the following precautions.  
– Use only the specified USB-AC adapter.  
-
– Never use the USB-AC adapter with another device.  
– Use a power outlet that matches the power supply specified for the  
USB-AC adapter.  
– Never plug the USB-AC adapter or power cord into a wall outlet that is shared  
by other devices, or into a shared extension cord.  
– Never locate the USB-AC adapter near a stove or other heating device.  
• Misuse of the USB-AC adapter can cause them to become damaged, creating  
the risk of fire and electric shock. Be sure to observe the following precautions.  
– Never place heavy objects on the USB-AC adapter or subject it to  
-
direct heat.  
– Do not modify the USB-AC adapter, allow it to become damaged, or  
forcibly bend it.  
– Do not twist or pull on the power cord.  
– When in use, locate the cord where it will not be tripped over.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
112  
WARNING  
*
• Never touch the power plug while your hands are wet. Doing so creates  
the risk of electric shock.  
"
+
-
• Should the power cord or power plug become damage, contact your  
retailer or nearest CASIO authorized service center.  
• Do not use the USB-AC adapter in areas where liquids* might spill on  
them. Liquids create the risk of fire and electric shock.  
* Liquids: Water, sports drinks, seawater, animal or pet urine, etc.  
• Do not place a flower vase or any other liquid container on top of the  
USB-AC adapter. Water creates the risk of fire and electric shock.  
%
1
• Do not touch the camera or USB-AC adapter during lightning storms.  
If a power cord was included with your camera  
• The power cord that comes with the camera is designed for use in the  
country where the camera was purchased. If you use the camera in  
another country, be sure to use a power cord that conforms to that  
+
country’s ratings and power supply voltage. Use of an improper power cord  
creates the risk of fire and electric shock.  
• Before going out, be sure to unplug the USB-AC adapter from the power  
+
outlet and put in a place away from objects used by animals and pets.  
An animal or pet chewing on the power cord can cause it short, leading  
to the risk of fire.  
. Water and Foreign Matter  
• Water, other liquids, or foreign matter (especially metal) getting inside  
the camera creates the risk of fire and electric shock. Immediately  
perform the following steps whenever any of the above symptoms are  
%
present. Particular care is required when using the camera where it is raining or  
snowing, near the ocean or other body of water, or in a bathroom.  
1. Turn off the camera.  
2. If you are using the USB-AC adapter to power the camera, unplug the power  
plug from the power outlet. Also, remove the battery from the camera, taking  
care to protect yourself against burn injury.  
3. Contact your retailer or nearest CASIO authorized service center.  
. Disassembly and Modification  
• Never try to take it apart or modify it in any way. Doing so creates the  
!
risk of electric shock, burn injury, and other personal injury. Be sure to  
leave all internal inspection, maintenance, and repair up to your retailer  
or nearest CASIO authorized service center.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
113  
WARNING  
*
. Dropping and Rough Treatment  
• Continued use of the camera after it is damaged by dropping or other  
rough treatment creates the risk of fire and electric shock. Immediately  
perform the following steps whenever any of the above symptoms are  
present.  
-
1. Turn off the camera.  
2. If you are using the USB-AC adapter to power the camera, unplug the power  
plug from the power outlet. Also, remove the battery from the camera, taking  
care to protect yourself against burn injury.  
3. Contact your retailer or nearest CASIO authorized service center.  
. Memory Cards  
• Memory cards are small and present a risk of accidentally being  
+
swallowed by infants and young children. Keep memory cards out of the  
reach of infants and young children. If a memory card is ever swallowed  
accidentally, contact a physician immediately.  
. Precaution when Camera is On  
• Do not touch the camera for long periods while it is on. The camera  
+
becomes warm when on, and long term contact creates the risk of low-  
temperature burns.  
. Interference with other digital devices  
• Should you notice radio interference or other problems on other devices  
-
is being caused while using this product, do not use the wireless  
functions of this product. Use of wireless functions creates the risk of  
radio interference and abnormal operation of other devices.  
• When in a medical facility or aircraft, comply with instructions of  
+
personnel in charge. Electromagnetic waves and other signals emitted  
by the camera’s wireless function create the risk of accident.  
• Do not use the camera’s wireless function while in the vicinity of high  
-
precision digital devices or digital devices that use weak signals. Doing  
so can interfere with proper operation of such digital devices and create  
the risk of accident.  
• When using the camera’s wireless function, keep it away from any  
+
person wearing a pacemaker. Magnetism emitted by the camera may  
affect cardiac pacemakers and other medical devices. Should you ever  
notice any abnormality, immediately move away from the product and contact a  
physician.  
• On a crowded train or any other crowded location where there is the  
+
possibility of being in the vicinity of a person wearing a cardiac  
pacemaker, turn off the camera’s wireless function or turn off the  
camera. Radio waves emitted by the camera’s wireless function may affect  
pacemaker operation.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
114  
CAUTION  
*
. USB-AC Adapter  
• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make  
sure you observe the following precautions.  
– Never cover the USB-AC adapter or power cord with a quilt, blanket,  
-
or other cover while it is in use, and do not use it near a heater. Doing  
so can interfere with heat radiation and cause the area around them  
to become hot.  
– Do not use detergent when cleaning the power cord, the USB-AC adapter, or  
the USB cable (especially the plugs and jacks).  
– Insert the power plug into the wall outlet as far as it will go.  
+
– Unplug the power plug from the wall outlet before leaving the camera  
unattended for long periods, such as when leaving on a trip, etc.  
– At least once a year, use a cloth or vacuum cleaner to clean any dust build up  
on the prongs of the power plug and in the area around them.  
– (Power cord included with your camera) When unplugging from the wall outlet,  
never pull on the power cord. Grasp the power plug and pull.  
. Rechargeable Battery  
• If battery charging does not end normally within the specified charging  
+
time, stop charging anyway and contact your local CASIO authorized  
service center. Continued charging creates the risk of battery  
overheating, fire, and explosion.  
• Be sure to read the user documentation that comes with the camera  
+
+
before using or charging the battery.  
• Store batteries in a location that cannot be reached by infants and young  
children. When using a battery where infants and young children are  
present, be on guard to ensure that they do not have the chance to  
remove the battery from the camera.  
• Do not leave batteries near areas used by pets. A pet chewing on a  
-
battery can lead to accidents caused by the battery leaking, overheating,  
or exploding.  
• Should fluid from a battery accidentally get onto clothing or your skin,  
+
immediately rinse it off with clean tap water. Prolonged contact with  
battery fluid can cause skin irritation.  
. Connections  
• Never plug any devices that are not specified for use with this camera  
-
into connectors. Connecting a non-specified device creates the risk of  
fire and electric shock.  
. Unstable Locations  
• Never place the camera on an unstable surface, on a high shelf, etc.  
-
Doing so can cause the camera to fall, creating the risk of personal  
injury.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
115  
CAUTION  
*
. Locations To Be Avoided  
• Never leave the camera in any of the following types of locations. Doing so  
creates the risk of fire and electric shock.  
– Areas subject to large amounts of humidity or dust  
-
– Food preparation areas or other locations where oil smoke is present  
– Near heaters, on a heated carpet, in areas exposed to direct sunlight,  
in a closed vehicle parked in the sun, or other areas subject to very high  
temperatures  
. Monitor Screen  
• Do not apply strong pressure to the LCD panel surface or subject it to  
strong impact. Doing so can cause the display panel glass to crack and  
lead to personal injury.  
• Should the monitor screen ever become cracked, never touch any of the  
liquid inside the monitor screen. Doing so creates the risk of skin  
inflammation.  
-
1
• Should monitor screen liquid ever get into your mouth, immediately rinse  
your mouth out and contact your physician.  
+
+
• Should monitor screen liquid ever get into your eyes or onto your skin,  
immediately rinse with clean water for at least 15 minutes and contact  
your physician.  
. Backing Up Important Data  
• Always keep backup copies of important data in camera memory by  
transferring it to a computer or other storage device. Note that data can  
be deleted in the case of camera malfunction, repair, etc.  
+
+
. Memory Protection  
• Whenever replacing the battery, be sure to follow the correct procedure  
as described in the documentation that comes with the camera.  
Incorrectly replacing the battery can result in corruption or loss of data in  
camera memory.  
. LED Light  
• Do not fire the LED light or use other light emitting functions while the  
light is pointed in the direction of and too close to a person’s face. Doing  
so creates the risk of momentary loss of eyesight.  
-
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
116  
Precautions During Use  
. Data Error Precautions  
Your digital camera is manufactured using precision digital components. Any of the  
following creates the risk of corruption of data in camera memory.  
– Removing the battery or memory card while the camera is performing some  
operation  
– Removing the battery or memory card while the back lamp is flashing green after  
turning off the camera  
– Disconnecting the USB cable while communication is in progress  
– Shooting with a battery that quickly goes low right after it is charged  
• Shooting with a battery that quickly goes low right after it is charged can also  
cause camera malfunction. Replace the battery with a new one immediately.  
– Other abnormal operations  
Any of the above conditions can cause an error message to appear on the monitor  
screen (page 130). Perform the action indicated by the message that appears.  
. Operating Environment  
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)  
• Operating Humidity: 10 to 85% (non condensation)  
• Do not place the camera in any of the following locations.  
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand  
– Near heating or cooling devices, or in other areas subjected to extreme changes  
in temperature or humidity  
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration  
. Condensation  
Sudden and extreme temperature changes, such as when the camera is moved from  
the outdoors on a cold winter day into a warm room, can cause water droplets called  
“condensation” to form on the interior and the exterior of the camera, which creates  
the risk of malfunction. To prevent condensation from forming seal the camera in a  
plastic bag before changing locations. Then leave the bag sealed to allow the air  
inside to naturally change to the same temperature as the air in the new location.  
After that, remove the camera from the bag and open the battery cover for a few  
hours.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
117  
 
. Lens  
• Never apply too much force when cleaning the surface of the lens. Doing so can  
scratch the lens surface and cause malfunction.  
• You may sometimes notice some distortion in certain types of images, such as a  
slight bend in lines that should be straight. This is due to the characteristics of  
lenses, and does not indicate malfunction of the camera.  
. Caring for your camera  
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign  
matter on the lens can interfere with proper operation of the camera. Use a blower  
or other means to keep the lens and flash window free of dirt and dust, and wipe  
gently with a soft, dry cloth.  
• To clean the camera, wipe it with a soft, dry cloth.  
. Old Rechargeable Battery Handling Precautions  
• Insulate the positive and negative terminals with tape, etc.  
• Do not peel the covering off of the battery.  
• Do not try to take the battery apart.  
. Discarding or Transferring Ownership of a Memory Card or the  
Camera  
The format and delete functions of the camera do not actually delete files from the  
memory card. The original data remains on the card. Note that responsibility for the  
data on a memory card lies with you. The following procedures are recommended  
whenever you discard a memory card or the camera, or if you transfer ownership to  
another party.  
• When discarding a memory card, either physically destroy the memory card or use  
commercially available data delete software to completely delete the data on the  
memory card.  
• When transferring ownership of a memory card to another party, use commercially  
available data deletion software to completely delete the data on it.  
• Use the format function (page 109) to completely delete the data in built-in memory  
before discarding or transferring ownership of the camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
118  
 
. Precautions when using the wireless LAN function  
This product uses wireless data communication which can cause interference with or  
be subject to interference by other nearby devices.  
Radio transmission interception  
Note that the radio waves that are used to send and receive data can be intercepted  
by third parties.  
Unauthorized access  
CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized  
access and/or use of the access point equipped on this product if the product is ever  
lost or stolen.  
Use as a wireless LAN device  
Use the wireless LAN function of this product only as specifically described in this  
manual. Any other use is unintended use, and CASIO COMPUTER CO., LTD. shall  
be held in no way liable for any damages arising out of unintended use.  
Magnetism, electrostatic charge, and radio interference  
Do not use this product near a microwave oven or any other area where magnetism,  
electrostatic charge, or radio interference is generated. Radio wave reception may be  
poor in certain environments.  
Also note that other devices using the same 2.4GHz band used by this product may  
cause reduced processing speeds in both devices.  
Connecting to a public LAN  
This product does not support wireless LAN connection over a public wireless LAN  
environment.  
Intended Areas of Use  
This camera’s wireless LAN function is intended for use in China only. CASIO  
COMPUTER CO., LTD. shall be held in no way responsible if the wireless LAN  
function is used outside of China in violation of the radio laws and/or regulations that  
apply in the country or geographic area where it is used.  
. Other Precautions  
The camera becomes slightly warm during use. This is normal and does not indicate  
malfunction.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
119  
. Copyrights  
Except for your own personal enjoyment, unauthorized use of snapshots or movies of  
images whose rights belong to others, without the permission of the right holder, is  
forbidden by copyright laws. In some cases, shooting of public performances, shows,  
exhibitions, etc. may be restricted entirely, even if it is for your own personal  
enjoyment. Regardless of whether such files are purchased by you or obtained for  
free, posting them on a website, a file sharing site, or any other Internet site, or  
otherwise distributing them to third parties without the permission of the copyright  
holder is strictly prohibited by copyright laws and international treaties. For example,  
uploading or distributing on the Internet images of TV programs, live concerts, music  
videos, etc. that were photographed or recorded by you may infringe upon the rights  
of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of  
this product in any way that infringes on the copyrights of others or that violates  
copyright laws.  
The following terms, which are used in this manual, are registered trademarks or  
trademarks of their respective owners.  
Note that trademark ™ and registered trademark ® are not used within the text of this  
manual.  
• microSDXC Logo is a trademark of SD-3C, LLC.  
• Microsoft, Windows, Windows Vista, Windows 7, and Windows 8 are registered  
trademarks or trademarks of Microsoft Corporation in the United States and other  
countries.  
• Macintosh, Mac OS, QuickTime, iPhoto, and iPhone are trademarks of Apple Inc.  
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing, LLC.  
• Android is a registered trademark of Google Inc.  
• iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United  
States.  
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.  
• EXILIM and EXILIM Remote are registered trademarks or trademarks of CASIO  
COMPUTER CO., LTD.  
• All other company or product names mentioned herein are registered trademarks  
or trademarks of their respective companies.  
Any and all unauthorized copying, distribution, and transfer for commercial purposes  
of the software provided by CASIO for this product are prohibited.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
120  
Power Supply  
Charging  
. If the camera’s back lamp starts flashing red...  
If the back lamp starts flashing red during charging, it means that further charging is  
not possible for one of the reasons below. Perform the actions described below to  
correct the problem and then try charging again.  
Ambient temperature or the temperature of the battery is abnormally high  
or low  
Unplug the USB cable from the camera and wait for a while until the camera is within  
the temperature range of 15°C to 35°C (59°F to 95°F), and then try charging again.  
Safety timer activated  
A battery that has not been used for a long time, certain types of computers, and  
connection conditions can cause charging to take longer than normal. If charging  
takes longer than about five hours, a safety timer will terminate it automatically, even  
if the battery is not fully charged. If the battery has not been used for a very long time,  
charging may terminate automatically after only about 60 minutes.  
1) Using a battery that has not been used for a long time.  
Disconnect and then reconnect the USB cable to resume charging.  
2) Insufficient power supply when connected to computer  
The camera can be charged only via a USB 2.0 standard USB port. Connect  
directly to a USB port what supplies a current of 500mA.  
For details about the power supply capacity of a computer’s USB port, contact the  
manufacturer of the computer. Though disconnecting and then reconnecting the USB  
cable will resume charging, you may need to do so repeatedly if the power supply  
capacity of the computer is low.  
If problems persist after you perform the above steps or if the battery fails to  
charge after 5 hours, it could mean that the battery is faulty. Contact your nearest  
CASIO authorized service center.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
121  
     
Battery Precautions  
. Precautions during Use  
• Operation provided by a battery under cold conditions is always less than operation  
under normal temperatures. This is due to the characteristics of the battery, not the  
camera.  
• Charge the battery in an area where the temperature is within the range of 15°C to  
35°C (59°F to 95°F). Outside this temperature range charging can take longer than  
normal or even fail.  
• Do not tear or remove the battery outer label.  
• If a battery provides only very limited operation following a full charge, it probably  
means the battery has reached the end of its service life. Replace the battery with a  
new one.  
. Storage Precautions  
• Storing the battery for a long time while it is charged can cause deterioration of  
battery characteristics. If you do not plan to use a battery for some time, fully use  
up its charge before storing it.  
• Always remove the battery from the camera when you are not using it. A battery left  
in the camera can discharge and go dead, which will require some time to charge  
when you need to use the camera.  
• Store batteries in a cool, dry place (20°C (68°F) or lower).  
• To prevent over discharging of an unused battery, fully charge it, and then load it in  
the camera and fully use up the charge about once every six months.  
Using the Camera in another Country  
. Precautions during Use  
• The bundled USB-AC adaptor is designed for operation with any power supply in  
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the  
power plug depends on each country or geographic area. Before taking the camera  
and USB-AC adaptor along on a trip, check with travel agent about the power  
supply requirements in your destination(s).  
• Do not connect the USB-AC adaptor to a power supply through a voltage converter  
or similar device. Doing so can lead to malfunction.  
. Extra Batteries  
• Taking along extra fully charged batteries (NP-150) is recommended while on a trip  
in order to avoid not being able to shoot images due to the battery going dead.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
122  
   
Using a Memory Card  
See page 27 for information about supported memory cards and how to load a  
memory card.  
. Using a Memory Card  
• If a memory card starts to behave abnormally during image playback, you can  
restore normal operation by reformatting it (page 109). However, it is  
recommended that you always take along multiple memory cards whenever using  
the camera far away from the home or office.  
• As you record data to and delete data from a memory card a number of times, it  
loses its ability to retain data. Because of this, periodic re-formatting of a memory  
card is recommended.  
• Electrostatic charge, electrical noise, and other phenomena can cause data to  
become corrupted or even lost. Make sure that you always back up important data  
on other media (CD-R, CD-RW, hard disk, etc.).  
. Memory Card Handling Precautions  
Certain types of memory cards can slow down processing speed. Whenever possible  
use an Ultra High-Speed Type memory card. Note, however, that not all operations  
can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain  
movie quality settings can result in too much time being required to record data,  
which can result in breaks in the image and/or audio during playback. If this happens,  
the movie icon will turn yellow on the monitor screen.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
123  
 
Reset Initial Default Settings  
The tables in this section show the initial default settings on menus that appear in the  
REC mode and PLAY mode when you reset the camera (page 109).  
• A dash (–) indicates an item whose setting is not reset or an item for which there is  
no reset setting.  
IMPORTANT!  
• Some menu items may not be available, depending on the recording mode being  
use.  
. REC Menu  
Touch Shutter  
Self-timer  
Off  
ISO  
Auto  
AF  
Off  
Focus  
Review  
LED  
Off  
Type 2  
Image Size  
Movie Quality  
EV Shift  
12M  
Full HD  
0.0  
Self-portrait  
check  
Off  
Setup  
* See below.  
White Balance  
Auto  
* Default setting depends on country or geographic region.  
. PLAY Menu  
Paint  
–
–
–
–
–
Rotation  
Resize  
–
–
–
Slideshow  
Cut out subject  
Paste subject  
Protect  
Trimming  
Setup  
* See below.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
124  
   
. Setup Menu  
Screen  
Auto  
Adjust  
–
Auto rotate  
On  
3M  
Date Style  
Language  
HDMI  
–
Resize  
before send  
–
Auto  
Startup: On /  
Half Shutter: On /  
Shutter: On /  
WLAN  
password  
–
Sounds  
Startup  
Format  
Reset  
Off  
–
Operation: On /  
Operation Vol: 3 /  
Playback Vol: 7  
–
Timestamp  
World Time  
Off  
–
Version  
–
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
125  
When things don’t go right...  
Troubleshooting  
Problem  
Possible Cause and Recommended Action  
Power Supply  
Power does not turn 1)The battery of new camera is not charged. Charge the  
on.  
battery before using the camera.  
2)The camera battery may be dead. Charge the battery (page  
19). If the battery goes dead soon after being charged, it  
means the battery has reached the end of its life and needs  
to be replaced. Purchase a separately available CASIO  
NP-150 rechargeable lithium ion battery.  
The camera  
suddenly powers  
down.  
1)The camera is designed to turn off automatically after no  
operation is performed for about five minutes. Turn power  
back on.  
2)The battery may be dead. Charge the battery (page 19).  
3)The camera’s protection function may have activated  
because camera temperature is too high. Turn off the  
camera and wait until it cools down before trying to use it  
again.  
Power will not turn  
off. Nothing  
Remove the battery from the camera and then reload them.  
happens when a  
button is pressed.  
Charging  
The back lamp does 1)Unplug the USB cable from the camera and then plug it back  
not light red and the  
battery won’t  
charge.  
in again.  
2)Remove the battery from the camera and then reload it  
(page 20).  
Image Recording  
Image is not  
1)If the camera is in the PLAY mode, touch “r” (REC) to  
enter the REC mode.  
2)If the message “Memory Full” appears, transfer images to  
your computer, delete images you no longer need, or use a  
different memory card.  
recorded when the  
shutter button is  
pressed.  
Auto Focus does  
not focus properly.  
1)If the lens is dirty, clean it off.  
2)The subject may not be in the center of the focus frame when  
you compose the image.  
3)You may be moving the camera when shooting. Try shooting  
with the “HS Anti Shake” BEST SHOT scene, place the  
camera on a tabletop or some other stable surface, or find  
some way to fix the camera in place.  
4)You may be pressing the shutter button all the way without  
waiting for Auto Focus. Half-press the shutter button and  
allow enough time for Auto Focus to focus.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
126  
   
Problem  
Possible Cause and Recommended Action  
The subject is out of The image may not be focused properly. When composing the  
focus in the  
image, make sure the subject is located inside the focus frame.  
recorded image.  
The LED light does 1)If the battery is dead, charge it (page 19).  
not light.  
2)LED light operation is disabled automatically whenever you  
are shooting with a BEST SHOT scene and HDR Art. Select  
a different recording mode (page 39).  
Camera powers  
down during Self-  
timer countdown.  
The battery may be dead. Charge the battery (page 19).  
The monitor screen 1)You may be using “Macro” for scenery or portraits. Use Auto  
image is out of  
focus.  
Focus for scenery and portrait shots (page 66).  
2)You may be trying to use Auto Focus or “Infinity Focus” when  
shooting a close-up shot. Use the “Macro” for close ups  
(page 66).  
There is digital  
noise in images.  
1)Sensitivity may have been increased automatically for a dark  
subject, which increases the chance of digital noise. Use a  
light or some other means to illuminate the subject.  
2)Shooting with a snapshot with a high ISO sensitivity setting  
can increase digital noise in the image. If digital noise  
becomes a problem, try changing the ISO sensitivity setting  
to a lower value.  
A recorded image  
was not saved.  
1)Camera power may have been turned off before the save  
operation was complete, which will result in the image not  
being saved. If the battery indicator shows  
battery as soon as possible (page 19).  
, charge the  
2)You may have removed the memory card from the camera  
before the save operation was complete, which will result in  
the image not being saved. Do not remove the memory card  
before the save operation is complete.  
Though available  
Not enough light is reaching the subjects. Adjust EV shift to the  
lighting is bright, the + side (page 63).  
faces of people in  
the image are dark.  
Night shots come  
out bad.  
Use the “HS Night Scene” BEST SHOT scene (page 50) when  
shooting at night.  
Subjects are too  
Sunlight reflected by water, sand, or snow, can cause  
dark when shooting underexposure of images. Adjust EV shift to the + side (page  
images in a  
seashore or ski  
area.  
63).  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
127  
Problem  
Possible Cause and Recommended Action  
The image is out of 1)Focusing may not be possible because the subject is outside  
focus during movie  
recording.  
the focus range. Shoot within the allowable range.  
2)The lens may be dirty. Clean the lens (page 118).  
3)During High Speed Movie recording, focus is fixed at the  
position where it was when recording started. To focus an  
image, half-press the shutter button for Auto Focus before  
you touch “b” (Movie) to start recording.  
Playback  
The color of the  
playback image is  
different from what  
appears on the  
monitor screen  
when shooting.  
Sunlight or light from another source may be shining directly  
into the lens when you are shooting. Position the camera so  
sunlight does not shine directly into the lens.  
Images are not  
displayed.  
This camera cannot display non-DCF images recorded onto a  
memory card using another digital camera.  
Images cannot be  
rotated.  
Note that you cannot edit the following types of snapshots.  
• Panorama images  
• Snapshots recorded with another camera  
• Extracted subjects  
File Deletion  
A file cannot be  
deleted.  
The file may be protected. Unprotect the file (page 81).  
Wireless LAN  
I can’t establish a  
wireless LAN  
connection.  
The wireless LAN  
connection is  
broken.  
1)The camera cannot connect with a smartphone if they are  
too far apart from each other.  
2)The smartphone may be connected with another wireless  
LAN. Check the smartphone’s Wi-Fi settings and confirm  
that the camera is selected for wireless LAN connection  
(page 86).  
3)Connection may have been lost due to interference caused  
by a nearby microwave oven, cordless phone, or other  
wireless LAN device. Move the camera away from the device  
causing the problem.  
Other  
The wrong date and The date and time setting is off. Set the correct date and time  
time are displayed, (page 106).  
or the wrong date  
and time are being  
stored along with  
image data.  
The messages on  
the display are in  
the wrong language.  
The wrong display language is selected. Change the display  
language setting (page 107).  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
128  
Problem  
Possible Cause and Recommended Action  
Images cannot be  
transferred over a  
USB connection.  
1)The USB cable may not be connected securely. Check all  
connections.  
2)If the camera is not turned on, turn it on.  
3)Your computer may not be able to recognize the camera if  
you connect via a USB hub. Always connect directly to the  
computer’s USB port.  
Language selection 1)You did not configure initial settings after purchasing the  
screen appears  
when the camera is  
turned on.  
camera or the camera may have been left with a dead  
battery. Check the camera setup (pages 25, 106).  
2)There may be a problem with the camera’s memory data. If  
this is the case, perform the reset operation to initialize the  
camera’s setup (page 109). After that, configure each  
setting. If the language selection screen does not re-appear  
when you turn the camera on, it means that the camera’s  
memory management data has been restored.  
If the same message appears after you turn power back on,  
contact your retailer or a CASIO authorized service center.  
There are various  
indicators and  
values on the  
The monitor screen shows indicators and other information  
about shooting conditions and the image you are recording.  
You can touch the tab and then touch the “DISP” to select what  
information you want to include on the display (page 9).  
monitor screen.  
The time and date  
Load the camera’s battery and reconfigure the time and date  
settings configured settings (page 25). Do not remove the battery from the camera  
the first time after  
purchasing the  
for at least 24 hours after configuring time and date settings.  
After that, the settings will not be reset if you remove the  
camera are reset to battery.  
their factory defaults • If the time and date are reset to their factory default settings  
when I remove the  
camera’s battery.  
when you remove the battery after it has been loaded for  
more than 24 hours, it could mean that the camera’s setting  
memory is defective. Contact your retailer or a CASIO  
authorized service center.  
Buttons are not  
responsive right  
With large capacity memory cards there is a delay after the  
power has been turned on before the buttons become  
after the power has responsive.  
been turned on.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
129  
Display Messages  
The camera’s protection function may have activated  
because camera temperature is too high. Turn off the  
camera and wait until it cools down before trying to use it  
again.  
ALERT  
Battery is low.  
Battery power is low.  
There is something wrong with the memory card. Turn off the  
camera, remove the memory card and then reload it into the  
camera. If this message re-appears when you turn the  
camera back on, format the memory card (page 109).  
Card ERROR  
IMPORTANT!  
• Formatting a memory card deletes all its files. Before  
formatting, try transferring recoverable files to a computer  
or some other storage device.  
This message appears when the wireless LAN connection is  
broken for some reason during data communication between  
the camera and smartphone.  
Communication  
stopped.  
File could not be  
saved because  
battery is low.  
Battery power is low, so an image file could not be saved.  
You are trying to record a file while there are already  
9999 files stored in the 999th folder. If you want to record  
more, delete files you no longer need (page 35).  
Folder cannot be  
created.  
This message appears and the camera turns off whenever  
lens performs some unexpected operation. If the same  
message appears after you turn power back on, contact a  
CASIO authorized service center or your original retailer.  
LENS ERROR  
Memory Full  
Memory is full with images you recorded and/or files saved  
by editing operations. Delete files you no longer need (page  
35).  
Image compression could not be performed for some reason  
during image data storage. Shoot the image again.  
Record Error  
Your camera system is corrupted. Contact your retailer or a  
CASIO authorized service center.  
SYSTEM ERROR  
There are no files. There are no files in built-in memory or on the memory card.  
This card is not  
formatted.  
The memory card loaded in the camera is not formatted.  
Format the memory card (page 109).  
This file cannot be The file you are trying to access is corrupted or is a type that  
played. cannot be displayed by this camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
130  
 
This message will appear part way through an operation  
when you attempt to use a function that is not allowed in  
combination with another function.  
This function  
cannot be used.  
Number of Snapshots/Movie Recording Time  
Snapshot  
microSD  
Image Size  
(Pixels)  
Approximate  
File Size  
Built-in Memory*1  
Recording Capacity  
Memory Card*2  
Recording Capacity  
x
12M (4000 3000)  
4.13 MB  
3.62 MB  
1.72 MB  
290 KB  
7
2286  
2728  
x
3:2 (4000 2656)  
9
14  
91  
x
5M (2560 1920)  
4283  
x
VGA (640 480)  
26809  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
131  
     
Movies  
Maximum  
Recording  
Time with  
microSD  
Memory  
Card*2  
Built-in  
Memory*1  
Recording  
Capacity  
File Size  
of  
1-minute  
Movie  
Continuous  
Recording  
Time per  
Movie*3  
Image Size /  
Pixels  
(Audio)  
Approximate  
Data Rate  
(Frame Rate)  
Maximum  
File Size  
14.2 Megabits/  
second  
(30 frames/  
second)  
Full HD  
1920 1080  
(Monaural)  
2 hours  
27 seconds  
x
14 minutes 106.5 MB 29 minutes  
55 seconds  
4
*
10.9 Megabits/  
second  
(30 frames/  
second)  
HD  
1280 720  
(Monaural)  
2 hours  
56 minutes  
25 seconds  
4 GB or  
29 minutes  
x
36 seconds  
9 seconds  
81.8 MB  
29 minutes  
40.0 Megabits/  
second  
(240 frames/  
second)  
HS240  
512 384  
(No audio)  
48 minutes  
5 seconds  
12 minutes  
58 seconds  
x
300.0 MB  
*1 Built-in memory capacity after formatting (Approx. 52.1MB)  
*2 When using a 16GB microSDHC memory card (SanDisk Corporation). Number of  
image and recording time values depend on the memory card you are using.  
*3 The allowable recording time will be shorter if the capacity of the microSD memory card  
you are using is smaller than the maximum size of one file.  
*4 The data transfer rate of built-in memory is not sufficient for Full HD movies. Whenever  
possible use an Ultra High-Speed Type memory card.  
• Snapshot and movie recording capacity values are approximate and intended for  
reference only. Actual capacity depends on image contents.  
• File size and data rate values are approximate and intended for reference only. Actual  
values depend on the type of image being shot.  
• When using a memory card with a different capacity, calculate the number of images as a  
percentage of 16GB.  
• The time it takes to play back a high speed movie will be different from the time it takes to  
record it. If you record a high speed movie for 10 seconds, for example, it will take  
80 seconds to play it back.  
• Each movie can be up to 29 minutes long. Movie recording stops automatically after  
29 minutes of recording.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
132  
 
Specifications  
File Format  
Snapshots:  
JPEG (Exif Version 2.3; DCF 2.0 standard)  
Movies:  
MOV format, H.264/AVC standard, IMA-ADPCM (monaural)  
Recording Media  
Built-in Memory (Image Storage Area: 52.1MB*)  
microSD/microSDHC/microSDXC  
* Built-in memory capacity after formatting  
Recorded Image Sizes Snapshots:  
x
x
x
12M (4000 3000), 3:2 (4000 2656), 5M (2560 1920),  
VGA (640 480)  
x
Movies:  
x
x
Full HD (1920 1080 30 fps), HD (1280 720 30 fps),  
HS240 (512 384 240 fps)  
x
Effective Pixels  
Imaging Element  
12.1 Megapixels  
Size: 1/2.3-inch square pixel high-speed CMOS  
Total Pixels: 12.76 Megapixels  
Lens/Focal Distance  
(Snapshot)  
F2.8 f = 3.8 mm  
(equivalent to 21 mm in 35 mm format)  
Zoom  
Up to 4.0X when SR zoom and Digital zoom are used in  
combination  
Up to 15.9X when SR Zoom, HD Zoom and Digital zoom are  
used in combination (VGA size)  
Focusing  
Contrast Detection Auto Focus  
• Focus Modes:  
Auto Focus, Macro Focus, Pan Focus, Infinity  
• AF Area: Spot  
* Intelligent AF area used when Premium Auto Pro is selected.  
9
9
)
Approximate Focus  
Range (Snapshot)  
(From Lens Surface)  
Auto Focus: 8 cm to  
(3.1" to  
Macro Focus: 8 cm to 50 cm (3.1" to 19.7")  
9
Infinity:  
Metering  
Multi-pattern by imaging element  
Program AE  
Exposure Control  
Exposure  
–2.0 EV to +2.0 EV (in 1/3EV steps)  
Compensation  
Shutter  
CMOS electronic shutter  
Shutter Speed  
Snapshot (Auto): 1/10 to 1/16000 second  
Snapshot (Premium Auto Pro): 1 to 1/16000 second  
* May differ due to the camera setup.  
Aperture Value  
F2.8  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
133  
 
White Balance  
Auto, Daylight, Overcast, Shade, Daywhite Fluorescent,  
Daylight Fluorescent, Tungsten, Manual WB  
Sensitivity  
Snapshots:  
(Standard Output  
Sensitivity)  
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,  
ISO 3200 equivalent  
Movies: Auto  
Monitor Screen  
3.0-inch TFT color LCD (Super Clear LCD)  
921,600 dots  
Capacitive type touch panel  
External connection  
terminal  
Micro USB port (Hi-Speed USB compliance, USB charging),  
HDMI output (Micro/TypeD)  
Microphones  
Speaker  
Monaural  
Monaural  
x
Power Requirements Rechargeable lithium ion battery (NP-150)  
1
Wireless data transfer Standard: IEEE 802.11b/g/n  
Operation frequency range: 1 to 11ch  
Encryption: WPA2  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
134  
Approximate Battery Life  
All of the values provided below represent the approximate amount of time under  
normal temperature (23°C (73°F)) before the camera turns off. These values are not  
guaranteed. Low temperatures shorten battery life.  
Number of snapshots (Operating Time)*1  
260 shots  
Actual movie recording time (Full HD movie)*1  
55 minutes  
Approximate continuous movie recording time  
(Full HD Movie)*2  
1 hour 30 minutes  
Approximate continuous movie recording time  
1 hour 40 minutes  
3 hours 20 minutes  
(High speed movie)*2  
Continuous Playback (Snapshots)*3  
• Battery: NP-150 (Rated Capacity: 950 mAh)  
• Recording Medium: 16GB SDHC memory card (SanDisk Corporation UHS-I  
series)  
*1 In accordance with CIPA (Camera and Imaging Products Association) standards  
*2 In accordance with CASIO standards  
*3 Standard temperature (23°C (73°F)), one-image scroll approximately every  
10 seconds  
• The above values are based on a full charge, the first time the battery is charged  
after the camera is purchased. Repeated charging shortens battery life.  
• Frequency of Auto Focus usage and the time the camera is on greatly affects  
recording time and number of shots values.  
Power Consumption  
Dimensions  
3.7 V DC, Approximately 3.5 W  
x
x
128.9 (W) 61.6 (H) 14.9 (D) mm  
x
x
(5.1" (W) 2.4" (H) 0.59" (D))  
Weight  
Approximately 170 g (6.0 oz)  
(including battery and memory card*)  
Approximately 149 g (5.3 oz)  
(excluding battery and memory card)  
* 16GB microSDHC memory card (SanDisk Corporation)  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
135  
 
. Rechargeable lithium ion battery (NP-150)  
Rated Voltage  
3.7 V  
Rated Capacitance  
950 mAh  
Operating Temperature  
Requirements  
0 to 40°C (32 to 104°F)  
x
x
Dimensions  
34.2 (W) 39.8 (H) 6.9 (D) mm  
x
x
(1.35" (W) 1.57" (H) 0.27" (D)) (excluding projections)  
Weight  
Approximately 20 g (0.7 oz)  
. USB-AC adaptor (AD-C54UC)  
Input Power  
100 to 240 V AC, 50/60 Hz, 90 mA  
Output Power  
5.0 V DC, 650 mA  
Operating Temperature  
Requirements  
5 to 35°C (41 to 95°F)  
x
x
Dimensions  
64.6 (W) 38.4 (H) 24 (D) mm  
x
x
(2.5" (W) 1.5" (H) 0.9" (D)) (excluding projections)  
Weight  
Approximately 40 g (1.4 oz)  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
136  
CASIO COMPUTER CO., LTD.  
6-2, Hon-machi 1-chome  
Shibuya-ku, Tokyo 151-8543, Japan  
M29  
MA1305-A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2013  

Belshaw Brothers Convection Oven BXC Smartbake User Manual
Black Box Flat Panel Television LE003A UTP User Manual
Black Box Switch 8 Port Gigabit 8023at af PoE Switch User Manual
Blue Rhino Insect Control Equipment SV3000 User Manual
Bosch Appliances Home Security System LBB 3573 User Manual
Broil King Gas Grill 946 28 User Manual
Bush Hog Lawn Mower FTH 600 User Manual
Canon All in One Printer 6228B002 User Manual
Carrier Portable Generator 69UG15 User Manual
Chicago Electric Drill 67616 User Manual