MA0410-EA
Operation Guide HS-60W
ILLUSTRATION
USING THE STOPWATCH 1
Each press of the B button toggles the display between the TIME and STOPWATCH screens.
The stopwatch beeps whenever the A or C button is pressed.
Time Display Ranges
TIME SCREEN
STOPWATCH SCREEN
Total elapsed time and the split time can be displayed up to 9 hours, 59 minutes, 59.999 seconds. Lap time is
displayed up to 59 minutes, 59.999 seconds. Timing restarts from zero after any of the limits described above is
reached.
Hold down for a few seconds to
toggle between 12/24-hour formats.
The range of the lap counter is from 01 to 99. The lap count restarts from 00 after reaching 99.
NORMAL ELAPSED TIME
Lap counter
START
STOP
RESET
Day of
Year
Split time
Lap time
the week
MEASURE-
MENT
0
Month
Day
PM
Press
.
BUTTON
OPERATION
Total
elapsed
time
Hour
Seconds
Hour
Seconds
Minutes
1/1000th of a second
DISPLAY
Minutes
• A sticker is affixed to the glass of the stopwatch when you purchase it. Be sure to remove the sticker before using
the stopwatch.
• Depending on its model number, the configuration of your stopwatch may differ somewhat from that shown in the
NET ELAPSED TIME
START
illustration.
STOP
START
(a)
STOP
RESET
GENERAL GUIDE
0
(a)
(a + b)
MEASURE-
MENT
a
b
STOPWATCH MODE
A button ..... Starts and stops timing.
(Lost time)
B button ..... Toggles between the current time and stopwatch screens.
C button .... Registers a lap/split time.
R button ..... Recalls lap/split time records and the total elapsed time.
L button ..... Press to illuminate the display for about three seconds.
BUTTON
OPERATION
1ST SPLIT
SPLIT TIME AND LAP TIME
2ND SPLIT
2ND LAP
DISPLAY
Split time (SPLIT) is the time
elapsed from the start to a
specific point.
3RD SPLIT
3RD LAP
START
START
After stopping a net elapsed time operation by pressing A, you can resume it by pressing A again.
1ST LAP
Lap time (LAP) is the time
elapsed from one point to another
or for one lap around a track.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|