Introduction
Congratulations upon your selection of the QV-70 LCD Digital Cam-
era. The QV-70 comes with its own built-in liquid crystal color monitor
that let’s you instantly view the pictures you take.
LCD Digital Camera
QV-70
To get the most out of the QV-70, be sure to carefully read this
manual and follow the instructions contained in it.
Owner’s Manual
/P
R
O
T
E
C
D
T
E
L
Z
O
O
M
D
IS
P
M
O
D
E
P
ON/O
O
+
W
E
F
F
R
–
R
EC
PLAY
LC
D
O
N
/O
F
F
英
2
Contents
Using Auto Play .................................................................. 42
Protecting Memory Pages .................................................. 44
Hiding Protected Memory Pages ........................................ 47
Precautions .......................................................... 5
Unpacking............................................................. 9
General Guide .................................................... 10
Top and Display .................................................................. 10
Lens .................................................................................... 10
Bottom ................................................................................ 11
Terminals ............................................................................ 11
Deleting Memory Pages .................................... 48
To delete a single memory page ........................................ 48
To delete all unprotected memory pages ........................... 51
Connecting to Other Devices............................ 54
The camera terminals ......................................................... 54
Power Supply ..................................................... 13
To load batteries ................................................................. 13
Using AC Power ................................................................. 18
Using the Camera with a Connected Device ...... 55
Troubleshooting................................................. 61
Specifications..................................................... 68
About the camera’s backlight… ....................... 70
Recording Images .............................................. 20
To record an image ............................................................. 20
How to avoid hand movement… ......................................... 22
Fluorescent Lighting ........................................................... 23
Shooting images outdoors .................................................. 23
NORMAL/MACRO Switch .................................................. 24
Exposure Adjustment .......................................................... 25
Changing the Aperture Setting ........................................... 26
Record Mode Displays ........................................................ 27
Using the Self-Timer ........................................................... 31
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss resulting from the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
loss or claims by third parties which may arise through the use of
the QV-70.
Playing Back Images ......................................... 32
Displaying Images on the Camera’s LCD ........................... 32
Displaying Images on a TV Screen .................................... 34
Displaying the Memory Page Number ................................ 35
Producing a Multi-Page Display .......................................... 36
Using the Zoom Function .................................................... 40
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss caused by deletion of data as a result of malfunc-
tion, repairs, or battery replacement. Be sure to back up all impor-
tant data on other media to protect against its loss.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
General Guide
Check to make sure that all of the items shown below are included
with your camera. If something is missing, contact your dealer as
soon as possible.
The following illustrations show the names of each component, but-
ton and switch on the camera.
Top and Display
–
F
E R
F
O
/
W
N
O
+
ZOOM button
/PROTECT
P O
D E
O
M
I S P
D
O O M
Z
L
D E
C T
O T E
/ P R
(Timer/Protect)
button
DISP (Display) button
MODE button
/P
R
O
T
E
C
T
D
Z
O
E
L
O
M
DEL (Delete) button
D
IS
P
M
O
D
E
[+] (Forward)
button
+
P
O
O
N
W
E
/O
F
F
R
Soft case
–
Viewfinder
Shutter button
REC
Operation indicator
Camera
P
L
A
Y
[–] (Reverse)
button
LCD
Alkaline batteries (AA-size × 3)
O
N
/O
F
F
POWER switch
LCD
LCD button
Function switch
Lens
Manual
–
NORMAL/MACRO switch
R
E
F F
/ O
W
N
Wrist Strap
O
O
+
E
P
D
O
M
S P
I
D
M
O
O
Z
L
E
T
D
C
E
T
O
P R
/
Self-timer indicator
Lens
Special video cable
Aperture switch
9
10
General Guide
Tripod hole
Getting Acquainted
Self-timer Indicator and Operation Indicator
• Self-timer Indicator
Bottom
This indicator flashes when the camera’s self-timer is activated.
• Operation Indicator
This indicator stays lit while power is on. Its color changes as shown
below to indicate various operating conditions.
Battery compartment cover
BRIGHT (brightness) control
• BRIGHT control adjusts the brightness of the image on the LCD.
The brightness is set at the factory to the optimum setting, and nor-
mally does not need adjustment.
Color
Green
Orange
Red
Lit
Flashing
Recording
Battery warning
—
Power on
Exposure warning
Memory full
Terminals
–
R
F
F
E
/ O
W
O
O N
+
E
P
D
O
M
P
I S
D
M
O
O
Z
L
E
T
D
C
E
T
O
R
/ P
M
O
D
E
+
P
O
W
OF
E
R
AC Power terminal
DIGITAL terminal
F
–
Connecting the Wrist Strap
Pass the wrist strap through the hole on
the side of the camera as shown in the
illustration.
R
E
C
P
L
A
Y
L
O C
D
N
/O
F
F
Terminal panel cover
VIDEO OUT terminal
Important!
• To avoid possible damage caused by
accidently dropping the camera, be
sure to use the wrist strap to secure the
camera to your wrist whenever using it.
Opening the Terminal Panel Cover
Using the Soft Case
E
D
Keep the camera in its soft case to pro-
tect it when not in use.
O
+
–
M
P
IS
D
M
O
O
O
Z
R
E
W
O
P
FF
/O
N
Important!
• When closing the terminal panel cover, make sure that the plugs on
the inside of the cover align with and enter the terminals.
• Never forcibly pull on or twist the terminal panel cover. Undue force
can damage the cover.
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
Getting Acquainted
The camera features a two-way power supply that lets you use either
batteries (AA-size Alkaline or Lithium) or household AC current.
3. Close the battery compartment cover.
To load batteries
Be sure that camera power is turned off whenever loading or replac-
ing batteries.
1. Slide the battery compartment cover in the direction indi-
cated by the arrow in the illustration.
While pressing the stopper, slide the case in the direction
indicated by the arrow.
Battery Handling Precautions
Incorrect use or handling of batteries can cause them to leak or burst
and seriously damage your camera. Be sure to note the following
important precautions to avoid problems with batteries.
• Use only LR6 (AM-3) type alkaline or
FR6 type lithium dry cell batteries
with this camera. Never mix old bat-
teries with new ones. Failure to do so
can result in bursting or leaking of
batteries, creating the danger of fire
or personal injury.
2. Insert three batteries.
–
+
• Always make sure that the positive
Caution
[+] and negative [–] ends of the bat-
teries are facing correctly, as noted
by the markings on the camera itself.
Improper loading of batteries can re-
sult in bursting or leaking of batteries,
creating the danger of personal injury
or soiling of objects nearby.
Be sure to use Alkaline or Lithium batteries. Never use
manganese batteries (see precautions on the next page).
•
Make sure that the positive + and negative - ends of the
batteries are facing correctly.
13
14
Power Supply
Getting Acquainted
• Remove batteries from the camera if you do not plan to use it for
more than two weeks.
Low Battery Indicator
A low battery indicator (
) appears on the LCD and the operation
• Never recharge batteries, never allow direct connection between
two ends of a battery, and never try to take batteries apart.
indicator flashes orange whenever remaining battery power drops
below a certain level.
• Do not expose batteries to direct heat or dispose of them by burn-
ing. Doing so can create the danger of explosion.
• Never mix batteries of different types.
• Dead batteries are susceptible to leakage, which can cause serious
damage to your camera. Remove batteries from the camera as
soon as you notice they are dead.
• The batteries that power this camera normally become warm when
they lose power. This does not indicate malfunction.
The above indications mean that the camera will soon turn off auto-
matically if you continue using it. Replace all three camera batteries
with new ones as soon as possible.
Standard Battery Life
The battery life reference values given below indicate the amount of
time at standard temperature (25°C) until power automatically turns
off due to battery failure. They do not represent a guarantee that bat-
teries will perform for any amount of time. Actual battery life depends
on the battery brand, when the battery was manufactured, and ambi-
ent temperature where the battery is being used.
Flash Memory
The camera features flash memory for storage of images. Flash
memory does not require electrical power to store data, so image
data is retained in memory even when you turn camera power off. If
batteries go dead, simply load a set of new batteries or connect the
AC adaptor and you will be able to view images in camera memory.
LCD OFF*
LCD ON*
REC
(one image per
10 seconds)
LR6(AM3)AA-size
alkaline batteries
1,600
images
400
images
FR6 AA-size
2,200
800
lithium batteries
images
images
LR6(AM3)AA-size
alkaline batteries
70
minutes
270
minutes
PLAY
(Auto Play)
FR6 AA-size
440
150
lithium batteries
minutes
minutes
* Values in these columns are approximations intended for reference only.
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
Getting Acquainted
Auto Power Off
Using AC Power
Power automatically turns off whenever you do not perform any cam-
era operation for a period of time. Power turns off after about one
minute in the Record Mode or after about three minutes in the Play-
back Mode.
To power the camera from standard AC power, use the optional AC
adaptor (AD-C67).
AC power terminal
–
AC adaptor
F F
E
O
/
W
N
+
E
O
P
O
D
O
M
P
S
I
D
M
O
O
Z
L
E
• To restore power, simply slide the POWER switch to the right as
you normally do.
T
D
C
E
T
O
R
/ P
POWER
ON/OFF
AC outlet
–
AC Adaptor precautions
• Never use an electrical outlet whose
voltage is outside the rating marked
on the camera. Doing so can create
the danger of fire,malfunction,or
electrical shock. Use only the op-
tional AC adaptor specified for this
camera.
Important!
The Auto Power Off function does not operate under the following
conditions.
Caution
• During Auto Play (page 42)
• Should the cord of the AC adaptor
become damaged (exposed internal
wiring or shorts), request a replace-
ment from an authorized CASIO ser-
vice provider. A damaged AC adap-
tor cord creates the danger of fire,
malfunction,or electrical shock.
• When operations are being performed on a computer connected to
the camera via the camera’s DIGITAL terminal.
• Whenever the AC adaptor is connected to the camera.
17
18
Recording Images
Power Supply
• Always be sure to use the AD-C67
AC adaptor only. Using any other AC
adaptor can cause damage to the
camera not covered by the warranty.
The following procedure provides the basic steps for recording an
image.
To record an image
• When unplugging the AC adaptor
from the wall socket, be sure to
grasp the adaptor (not the cord).
1. Enter the Record Mode.
REC
Caution
•
Slide the function switch to the
REC position.
• Avoid an undue bending, pulling,
and twisting of the AC adaptor's
cord, and never try to lengthen the
cord by splicing it with other wire.
PLAY
2. Turn on the camera.
•
Slide the POWER switch in the di-
rection indicated by the arrow.
POWER
–
•
The POWER switch automatically
slides back to its original position
when you release it.
ON/OFF
• Be sure to switch power off before connecting or disconnecting the
adaptor.
• Always turn camera power off before disconnecting the AC adaptor,
even if the camera has batteries installed. If you don't, the camera
will turn off automatically when you disconnect the AC adaptor.
Even so, you run the risk of damaging the camera whenever you
disconnect the AC adaptor without first turning power off.
•
•
When power comes on, the image of the object that is in
front of the camera’s lens appears on the LCD.
You can perform steps 1 and 2 in either order (1 then 2, or 2
then 1).
• The AC adaptor may become warm to the touch after extended pe-
riods of use. This is normal and is not cause for alarm.
3. Set the NORMAL/MACRO switch to
tion.
(NORMAL) posi-
• After use turn off the power switch of the camera and unplug adap-
tor from the AC outlet.
•
If the object whose image you are
recording is about 15 centimeters
from the lens (about 6 inches), set
the NORMAL/MACRO switch to
(MACRO). See page 24 for
details on using this switch.
Note
• The camera is designed to refresh the image on the LCD about
seven times per second. Because of this, you may experience a
feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Images
Operation
•
You can use the camera to take the next picture after the
“WAIT” message disappears or after the operation indicator
stops flashing green.
4. Record the image.
•
Compose the image you want to
R
record while viewing it on the
LCD.
PLAY
LCD
ON/OFF
•
•
Here you could change the function switch to the PLAY posi-
tion and view the image you just recorded.
•
•
It is best to look at the LCD di-
rectly, and not from an angle.
Note that turning off the camera’s LCD helps to conserve
battery power.
If you plan to use the viewfinder to
compose the image, press the
LCD button to turn off the LCD.
Caution
• Never remove the camera’s batteries while the “WAIT” mes-
sage is on the LCD or the operation indicator is flashing
green. Doing so not only cancels storage of the image being
recorded, it can also corrupt other image data already
stored in camera memory.
•
The area of the image recorded
by the camera may differ slightly
from the area that appears within
the viewfinder. For more precise
image composition, use the LCD
monitor screen instead of the
viewfinder.
How to avoid hand movement…
•
When using the MACRO setting, the field of view of the
viewfinder is very different from the area that is photo-
graphed. Because of this, you should always use the
camera’s LCD monitor screen to compose images when us-
ing the MACRO position.
Any hand movement when you press the shutter button can causes
blurring of the recorded image. Note the following points on avoiding
hand movement.
• Make sure there is no excessive movement of the image of the ob-
ject on the LCD.
•
•
Take care that your finger is not blocking the lens.
When the image is situated on the LCD as you want it, press
the shutter button.
• Use a tripod whenever possible when recording images in dim light-
ing. The camera automatically adjusts shutter speed in accordance
with the brightness of the object whose image is being recorded.
Shutter speed is quite slow for dimly lit objects, increasing the pos-
sibility of blurring caused by hand movement.
•
•
Press the shutter button lightly to avoid moving the camera.
See page 22 for information on how to avoid hand move-
ment.
The message “WAIT” appears on the LCD for about six sec-
onds along with the image that was recorded when you
pressed the shutter button. You can use the camera to take
the next picture after the “WAIT” message disappears.
21
22
Recording Images
Operation
Fluorescent Lighting
NORMAL/MACRO Switch
The NORMAL/MACRO switch tells the cam-
era how much distance there will be between
the lens and the object whose image you are
recording. The following table describes the
conditions covered by each switch setting.
When using the MACRO setting, the field of
view of the viewfinder is very different from
the area that is photographed. Because of
this, you should always use the camera’s
LCD monitor screen to compose images
when using the MACRO position.
Fluorescent lighting actually flickers at a frequency that cannot be
detected by the human eye. When using the camera indoors under
such lighting, you may experience some brightness or color problems
with recorded images. The actual extent of the problems depends on
what cycle of the fluorescent light’s flicker is occurring when the
camera’s shutter actually releases. For best results, use a commer-
cially available video lights.
Shooting Images Outdoors
Switch position
(NORMAL)
(MACRO)
Strong direct or reflected sunlight can cause recorded images to take
on a greenish tinge. This is due to the characteristics of the camera’s
charge-coupled device (CCD), and it does not indicate malfunction of
the camera. One way you can try to minimize this problem is to set
the aperture to [●] (F8).
0.6 to 3.0 meters
For portraits taken
indoors
12 to 14 cm
For close ups taken
indoors
Aperture F2.8(○)
(4.7"~5.5")
(2.0~9.8 feet)
0.4 meters to ∞
For general outdoor
images
10 to 18 cm
For outdoor close-ups
(3.9"~7.1")
F8 (●)
(1.3 feet~)
The above figures indicate the distance from the lens protection filter
to the subject.
* See page 26 for details on how to change the aperture.
0.6～3.0m
(2.0～9.8 feet)
12～14cm
(4.7"～5.5")
F2.8(○)
F8(●)
10～18cm
(3.9"～7.1")
0.4m ～
(1.3 feet～)
M ACRO
∞
NORM AL
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Images
Operation
Notes
Exposure Adjustment
• Exposure adjustment is generally expressed in terms of an expo-
sure adjustment value. The exposure adjustment value is always
set to zero whenever you turn on the camera.
This camera features an automatic exposure (AE) function that auto-
matically changes the shutter speed in accordance with lighting. In
addition, you can also manually adjust the exposure to compensate
for backlighting, indirect indoor lighting, dark backgrounds, and other
special conditions.
• The exposure adjustment value is changed by 0.25EV with each
press of [+] or [–]. The range of the value is -2EV to +2EV.
• The exposure adjustment value automatically reverts to zero when-
ever the shutter button is pressed. You can manually reset the ex-
posure adjustment value by using [+] and [–] to change the value
To manually adjust the exposure
REC
1. Enter the Record Mode.
+
back to zero, which is indicated when the
pears from the monitor.
indicator disap-
–
•
Set the function switch to the REC
position.
PLAY
2. Use the [+] and [–] buttons to manually adjust the exposure.
DISP
MODE
•
Pressing [+] makes the image on
the LCD brighter. Use it to adjust
for dim indoor lighting and back-
lighting.
Changing the Aperture Setting
There are two aperture settings you can use to match lighting condi-
tions. Use the aperture switch to change the aperture setting.
+
POWER
ON/OFF
–
•
Pressing [–] makes the image on
the LCD darker. Use it to adjust
for bright sunlight.
• Use the [●] (F8) setting to decrease expo-
sure. This setting works best outdoors.
• Use the [○] (F2.8) setting to increase ex-
posure. This setting works best indoor and
with back lit images.
【＋】
【－】
+
+
–
–
Note
• Also see page 28 for information about exposure warning indica-
tors.
3. After adjusting the exposure, press the shutter button to
record the image.
25
26
Recording Images
Operation
•
The image number appears in
the upper right corner of the
LCD. It indicates the number of
the next image that will be re-
corded. The number 21, for ex-
ample, indicates that there are
20 images in memory, and the
next image will be number 21.
Record Mode Displays
The following provides details on the images, indicators and mes-
sages that appear on the LCD in the Record Mode.
If the LCD is turned off, press the LCD button to turn it on.
Image Display
An image of the object that is picked up by the camera’s lens appears
on the LCD. The camera is designed to refresh the image on the LCD
about seven times per second. Because of this, you may experience
a feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
•
To clear the image number from the LCD, press the DISP
button again.
Note
• Note that turning display of the image number on and off in the
Record Mode also affects the display of the memory page number
in the Playback Mode (page 35), and the zoom area indicator used
in the zoom operation (page 40). If you turn display of the image
number off in the Record Mode, for example, the memory page
number will not be shown in the Playback Mode.
Note
• The LCD image that appears in the Playback Mode is more detailed
than the image produced in the Record Mode. Because of this, you
should consider the Record Mode image to be a reasonable fac-
simile of the image that is actually stored in memory.
Displaying the Image Number
Exposure Warning Indicators
The image number is a value that indicates the number of the next
image that will be recorded. Up to 96 images can be stored in camera
memory.
An exposure warning indicator appear on the LCD and the operation
indicator lights orange whenever the light being picked up by the lens
would result in under exposure or over exposure of an image.
1. Enter the Record Mode.
REC
•
Set the function switch to the REC
position.
PLAY
2. Press the DISP button.
/PROTECT ZOOM DISP
MODE
+
Under exposure
Over exposure
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Images
Operation
Use the procedure described on page 26 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.
• Note that power will turn off quicker if you are using the optional
Connection Kit for data communications through the camera’s
DIGITAL terminal when the low battery condition occurs. This is to
protect against problems due to sudden power failure during data
transfer.
Important!
• The exposure warning indicators also appear when lighting is out-
side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.
• We strongly recommend that you use the optional AC adaptor
whenever sending or receiving data over the camera’s DIGITAL ter-
minal.
• The manual exposure adjustment procedure (page 25) cannot be
used when an exposure warning indicator is on the LCD. Clear the
warning indicator by changing the aperture switch setting.
• See page 13 for details on how to replace batteries.
• Pressing the [+] or [–] button to adjust exposure while an exposure
Memory Full Message
+
warning indicator is on the LCD causes a
appear. This is an EV value.
exposure value to
–
The message “MEMORY FULL” appears
on the LCD and the operation indicator
flashes red whenever you press the shutter
button while camera memory is full. If you
want to record more images, you must first
delete some of the images already stored
in camera memory. See page 48 for details
on how to delete images.
Low Battery Indicator
The low battery indicator ( ) appears on the LCD and the operation
indicator flashes orange whenever remaining battery power drops
below a certain level.
The above indications mean that the camera will soon turn off auto-
matically if you continue using it. Replace all three camera batteries
with new ones as soon as possible.
29
30
Playing Back Images
Recording Images
This section describes how to recall and view images stored in cam-
era memory. If the LCD is turned off, press the LCD button to turn it
on.
Using the Self-Timer
With the Self-Timer, the shutter is released 10 seconds after you
press the
/PROTECT button.
1. Enter the Record Mode.
Displaying Images on the Camera’s LCD
REC
•
Set the function switch to the REC
position.
The camera can store up to 96 images in memory. Images are se-
quentially numbered from 1 through 96. Think of camera memory like
a 96-page album of the images you record.
PLAY
The following procedure describes how to display images on the
camera’s built-in LCD.
2. Start the Self-Timer operation.
•
Place the camera securely on a
tripod, desk or other stable sur-
face, with the image to be re-
corded in the LCD.
1. Enter the Playback Mode.
REC
•
Slide the function switch to the
PLAY position.
•
•
After composing the image, press
PLAY
/PROTECT ZOOM DISP
MODE
2. Turn on the camera.
the
/PROTECT button.
+
•
Slide the POWER switch in the di-
The timer countdown is indicated
by the flashing of the Self-timer in-
dicator. The image on the LCD
also clears when the countdown
begins. The LCD image reap-
pears after shutter is released and
the image is recorded.
POWER
ON/OFF
rection indicated by the arrow.
The POWER switch automatically
slides back to its original position
when you release it.
Self-timer indicator
–
•
•
When power comes on, the page
that was displayed when you last
turned power off appears on the
LCD.
•
To cancel on ongoing Self-Timer
operation, press the
/PRO-
/PROTECT ZOOM DISP
MODE
TECT button or shutter button.
+
You can perform steps 1 and 2 in
either order (1 then 2, or 2 then 1).
Important!
• If battery power is low, camera power may turn off while a count-
down is in progress. If this happens, replace the batteries with new
ones.
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Images
Operation
Displaying Images on a TV Screen
Use the special video cable that comes with the camera to connect it
to a television as illustrated below, and you can then view the images
stored in camera memory on the TV’s screen.
3. Scroll through the memory pages until the image you want
to view is displayed.
•
Press [+] to display the next memory page or [–] to display
the previous memory page.
Note that turning off the camera’s LCD helps to conserve battery
power.
【＋】
【－】
【＋】
【－】
Important!
• The camera can be connected only to a TV that is equipped with a
VIDEO IN terminal.
• Make sure that the power of both the camera and the TV are turned
off when making connections.
Notes
• The signal output through this camera's VIDEO OUT terminal is an
NTSC signal. An image output through this terminal will not look
normal if the camera is connected to a PAL or other type of TV or
video deck.
• If you set the function switch to PLAY after recording an image, that
image appears on the LCD first.
• The message “MEMORY EMPTY” appears on the LCD if there are
no images stored in memory when you enter the Playback Mode.
Leaving the same image displayed on a TV or computer CRT
screen for very long periods can cause that image to “burn in,” leav-
ing a ghost of the image even after the original image is cleared. Be
sure not to leave an image on a TV or CRT screen for long periods.
VIDEO OUT terminal
TV
VIDEO IN terminal
–
F
E R
F
O
/
W
N
O
O
+
P
D E
O
M
P
S
I
D
M
O
O
Z
E L
T
D
C
E
O T
INPUT
/
P R
L
R
VIDEO
AUDIO
Accessory video cable
After connecting the camera and TV, set the
channel of the TV to the channel used for
video input.
33
34
Playing Back Images
Operation
After connecting the camera and TV, use the same procedures as
those described under “Displaying Images on the Camera’s LCD” on
page 32.
Notes
• The letter “P” next to the memory page number indicates that page
is “protected” and cannot be deleted. See page 44 for details about
protecting memory pages.
Important!
• Note that turning display of the memory page number on and off in
the Playback Mode also affects the display of the image number in
the Record Mode (page 27), and the zoom area indicator used in
the zoom operation (page 40).
• Note that only images already stored in camera memory can be
viewed on the TV screen. If you change to the camera’s Record
Mode, the image picked up by the camera’s lens will not appear on
the TV screen.
Producing a Multi-Page Display
Displaying the Memory Page Number
Four or nine memory pages can be displayed at the same time. This
feature can be used to display multiple memory pages on the
camera’s built-in LCD, or on the screen of a connected TV.
The memory page number is a value in the upper right corner of the
LCD that indicates the number of the currently shown memory page.
1. Enter the Playback Mode.
1. Enter the Playback Mode and turn on the camera.
2. Switch to multi-page display.
REC
•
Set the function switch to the
PLAY position.
•
•
•
Press the MODE button to
change between the different dis-
play formats.
PLAY
REC
2. Press the DISP button.
/PROTECT ZOOM DISP
MODE
Each press of MODE changes the
display format in the following se-
quence.
PLAY
+
/PROTECT ZOOM DISP
MODE
•
•
The memory page number ap-
pears in the upper right corner of
the LCD.
You cannot use the multi-page
display while protected memory
pages are hidden (page 47).
+
To clear the memory page num-
ber from the LCD, press the DISP
button again.
35
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Images
Operation
Selecting a Memory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.
1. In the Playback Mode, press the MODE button.
*
The memory page that is shown on the screen when you
change to the 4-page or 9-page format is in the first (upper
left) position in the multi-page display.
/PROTECT ZOOM DISP
MODE
+
•
This changes to the 4-page dis-
play.
3. Scroll through the pages on the display.
•
Use [+] (forward) and [–] (back) to scroll through the memory
pages. Pages are scrolled one, four, or nine at a time, de-
pending on the display format you are using.
In this example, we will select this page.
2. Press the DISP button.
【＋】
【－】
【＋】
【－】
1
2
4
5
7
6
8
9
10
•
This causes a white line to appear
under the first (upper left) page.
This white line indicates the
memory page that is currently se-
lected.
3
11
Unused pages are colored gray.
•
If you do not perform any opera-
tion for about 10 seconds, the
white line disappears from the dis-
play.
Note
• The brightness of the images on a multi-page display may differ
slightly from the brightness when a single image is shown. This is
because the camera automatically uses the brightness setting for
the brightest image contained in the multi-page display for all of the
images.
37
38
Playing Back Images
Operation
Using the Zoom Function
This function lets you select a specific part of a stored image and
enlarge it to twice its normal size.
3. Move the white line to the memory page that you want to
select.
•
Press [+] to move the line to the
right or [–] to move it to the left. In
this example, press [+] three
times or [–] once.
【＋】 X 3
1. Display an image.
2. Press the ZOOM button to zoom in on the center of the im-
age.
•
The center of the image is enlarged to twice its normal size.
4. Press the ZOOM button.
/PROTECT ZOOM DISP
MODE
•
The image in the selected
memory page appears as a 1-
page display.
+
3. Change the position of the zoom area.
•
You can use [+] and [–] to change the position of the zoom
area in the sequence shown on page 41.
4. Press the ZOOM button again to return the image to its
original size.
39
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Images
Changing the Location of the Zoom Area
Operation
Using Auto Play
Auto play lets you automatically scroll through the camera’s memory
pages quickly and easily. You can specify the speed of the scroll.
【＋】
【＋】
【＋】
【＋】
【＋】
【＋】
【＋】
【＋】
【＋】
Important!
• The camera’s Auto Power Off function (page 17) does not function
while an auto play operation is in progress. If you forget to turn the
camera off, there is the danger that auto play will continue until bat-
teries are dead. To avoid this, make sure that you stop the auto play
operation and turn the camera off when you finish viewing.
To start the auto play operation
1. Enter the Playback Mode and turn on the camera.
2. Start the auto play operation.
• Pressing [–] moves the zoom area in the opposite direction.
Notes
•
Hold down the [+] and [–] buttons until the message “AUTO
PLAY START” appears.
• If the page number is displayed in the upper right corner of the
screen when you perform a zoom operation, the number is replaced
by a zoom area indicator. This indicator shows you what part of the
image is currently enlarged on the display. You can turn the zoom
area indicator on and off by pressing the DISP button.
•
There must be at least two images (two pages) recorded in
memory to use the auto play operation. Otherwise, the
“AUTO PLAY START” message will not appear on the dis-
play.
Zoom area indicator
• Note that turning display of the zoom area indicator on and off dur-
ing a zoom operation also affects the display of the image number
in the Record Mode (page 27), and the memory page number in the
Playback Mode (page 35).
•
After about one second, this message disappears and the
auto play operation starts.
41
42
Playing Back Images
Operation
Protecting Memory Pages
You can protect specific memory pages to ensure that they are not
accidently deleted.
3 seconds
3 seconds
To protect a page
1. Enter the Playback Mode and turn on the camera.
•
Auto play continues to loop through the memory pages. This
means that when it reaches the last page, it starts again
from the first page.
•
Slide the function switch to the PLAY position.
•
Slide the POWER switch in the direction indicated by the
arrow.
3. Press the shutter button to stop the auto play operation.
•
If the page number is not shown in
the upper right of the page, press
DISP.
•
Pressing any button stops the
auto play operation.
/PROTECT ZOOM DISP
MODE
+
+
–
•
Note that the buttons of the cam-
era do not operate while a page
change operation is in progress.
Make sure that an image is shown
on the display when you press a
button to stop the auto play opera-
tion.
Page number
•
You can also use auto play with the multi-page display.
Change to the multi-page display first, and then start auto
play.
2. Scroll through the memory pages until the one you want to
protect is displayed.
DISP
MODE
•
Press [+] to display the next
memory page or [–] to display the
previous memory page.
+
POWER
ON/OFF
–
•
You cannot protect or unprotect
memory pages while protected
memory pages are hidden (page
47).
43
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Images
Operation
To unprotect a page
1. Enter the Playback Mode and turn on the camera.
2. Scroll through the memory pages until the one you want to
unprotect is displayed.
3. Protect the page.
•
Press the
/PROTECT button
to protect the page.
/PROTECT ZOOM DISP
MODE
+
•
The letter “P” appears to the right
of the page number to indicate
that page is protected.
3. Press the
/PROTECT button.
Protect indicator
•
The letter “P” disappears, indicating that page is no longer
protected.
Note
• If the page number is not displayed when you press the
/PRO-
TECT button, the page number along the protect indicator appears
about a second after you press the button.
Note
• If the page number is not displayed when you press the
/PRO-
TECT button, the page number appears about a second after you
press the button.
45
46
Deleting Memory Pages
Playing Back Images
Use the procedures described in this section to delete memory
pages. You can delete individual pages, or all the pages currently
stored in memory.
Hiding Protected Memory Pages
This function makes it possible for you to hide protected memory
pages so their images do not appear on the monitor during playback.
Warning!
To hide protected memory pages
The delete operation cannot be undone!
While holding down the [+] button, turn on the camera.
Before performing any of the procedures described in this section,
make sure that you really do not need the images recorded on the
memory pages you are deleting. Be especially careful when you are
using the all delete operation.
Important!
• You cannot protect or unprotect pages (pages 44~46) while pro-
tected pages are hidden.
• You cannot display multiple images (page 36) while protected
pages are hidden.
To delete a single memory page
• The following message appears on the monitor when you hide pro-
tected memory pages and all pages currently in memory are pro-
tected. It also appears if you delete all unprotected memory pages
while protected memory pages are hidden.
1. Enter the Playback Mode and turn on the camera.
•
Slide the function switch to the PLAY position.
•
Slide the POWER switch in the direction indicated by the
arrow.
2. Scroll through the memory pages until the one you want to
delete is displayed.
•
Press [+] to display the next memory page or [–] to display
the previous memory page.
•
Remember that you cannot delete a protected page. If the
page you want to delete is protected, use the procedure on
page 46 to unprotect it before proceeding.
To unhide protected memory pages
While holding down the [–] button, turn on the camera.
•
You cannot delete memory pages while using multi-page
display (page 36), zoom function (page 40), or auto play
(page 42).
47
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Memory Pages
Operation
To abort the delete operation without deleting anything,
press DEL.
•
/PROTECT ZOOM DISP
MODE
3. Press DEL.
DEL
6. To delete the page whose contents are shown, press the
shutter button.
+
* This screen clears
automatically from
the display if you do
not perform any op-
eration for about 30
seconds.
•
Pressing the shutter button de-
letes the page you selected and
displays the next page.
–
One-page delete
All page delete
Exit this screen
7. Repeat steps 5 and 6 as many times as you want to delete
memory pages.
4. Press the [+] button to specify deletion of a single page.
•
After you are finished deleting pages, press DEL to exit the
delete operation.
DISP
MODE
•
If the page you selected in step 2
is protected, the contents of the
nearest unprotected page appear
in the above screen.
+
Note
POWER
ON/OFF
–
• Deleting a page causes the remaining pages to be renumbered.
Blank pages are not left inserted between non-blank pages.
* This screen clears
automatically from
the display if you do
not perform any op-
eration for about 30
seconds.
1
2
3
4
The contents of the
memory page you
displayed in step 2
appear here.
5. Make sure that you really want to delete the page that con-
tains the contents shown on the display.
1
2
3
•
You can use [+] and [–] to change the memory page. When
you do, protected pages are skipped (not displayed).
49
50
Deleting Memory Pages
Operation
Warning!
To delete all unprotected memory pages
The following operation deletes all unprotected memory pages and
cannot be undone. Make sure that you do not need any of the images
stored in memory before performing this operation.
1. Enter the Playback Mode and turn on the camera.
/PROTECT ZOOM DISP
MODE
2. Press DEL.
DEL
4. To delete all unprotected pages, press the shutter button.
•
If there were no protected pages in memory, the message
“MEMORY EMPTY” appears on the display after all memory
pages are deleted.
* This screen clears
automatically from
the display if you do
not perform any op-
eration for about 30
seconds.
One-page delete
All page delete
Exit this screen
3. Press the [–] button to specify deletion of all unprotected
pages.
DISP
MODE
•
If there were protected pages in memory, they are the only
pages that remain after the delete operation is complete.
•
To abort the delete operation
without deleting anything, press
DEL.
+
POWER
ON/OFF
–
* This screen clears
automatically from
the display if you do
not perform any op-
eration for about 30
seconds.
51
52
Download from Www.Somanuals.com. All Manuals Search And Download.
ConnectingtoOther Devices
The camera terminals
The following describes which the camera terminal you should use
for each type of connection.
Deleting Memory Pages
•
The message shown below appears on the monitor screen
whenever you try to delete all memory pages while there are
protected pages in memory and those pages are hidden.
VIDEO OUT – Use this terminal when connecting to the VIDEO IN
terminal of a TV, video tape deck, video printer, or
other similar devices. Use the special video cable
that comes with the camera for such connections.
–
VIDEO IN
R
F
F
E
O
/
W
N
O
O
+
E
P
D
O
M
P
I S
D
M
terminal of other
device
O
O
Z
L
E
T
D
C
E
T
VIDEO OUT
terminal
O
/ P R
INPUT
L
R
VIDEO
AUDIO
Special video
cable that comes
with camera
DIGITAL – Use this terminal to connect to a personal computer (re-
quires optional Connection Kit), another CASIO Digital
Camera, or a QV Color Printer. The illustration below
shows how to connect to another digital camera.
–
–
F
R
F
F
E
F
E
O
O
W
N /
W
O
O
DIGITAL terminal
O
O N /
DIGITAL terminal*
+
E
+
E
P
P
D
D
O
O
M
M
P
P
S
S
I
I
D
D
M
M
O
O
O
O
Z
L
Z
L
E
E
T
D
T
D
C
C
E
E
T
T
O
O
R
R
P
/
P
/
Connecting
cable*
*The type of connecting cable you should use depends on the type
and shape of the terminals equipped on the digital camera you are
connecting to. See pages 57 through 59 for details.
53
54
Using the Camera with a Connected Device
Connecting to Other Devices
The following section provides specific information on how you can
use the camera after connecting to various types of devices. In each
case, the camera terminal you should connect to is indicated in the
• Page numbers (page 27) are also recorded on the video tape if they
are turned on. Be sure to turn off display of page numbers if you do
not want them in the taped images.
VIDEO
DIGITAL
title as
and
.
• If the low battery indicator (page 29) is displayed while you are re-
cording to video tape, it will also be recorded with the image. If this
happens, either replace batteries or use the AC adaptor.
Important!
• Make sure that the power of all devices is turned off before connect-
ing them.
VIDEO
Video Printer
• You should also check the owner’s manuals of the device you are
connecting to the camera for precautions and other information.
You can use Video Printer to print copies of images in camera
memory.
VIDEO
Television
To print camera images on a Video Printer
• See page 34 of this manual for details about connecting to a televi-
sion and displaying images from camera memory on a TV screen.
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video printer.
2. Set up the video printer to print images input through its VIDEO IN
terminal.
VIDEO
Video Tape Deck
• Consult the owner’s guide that comes with the video printer for de-
tails about how to set up for printing.
You can use the video tape deck to record images from the camera.
3. Enter the camera Playback Mode and display the image you want
to print.
To record camera images on video tape
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video tape deck.
4. Start the video printer’s print operation.
• Page numbers (page 27) are also included on the print if they are
turned on. Be sure to turn off display of page numbers if you do not
want them in the print.
2. Set up the video tape deck to record images input through its
VIDEO IN terminal.
• Consult the owner’s guide that comes with the tape deck for details
about how to set up for recording.
• If the low battery indicator (page 29) is displayed while you are print-
ing, it will also be printed with the image. If this happens, either
replace batteries or use the AC adaptor.
3. Enter the camera Playback Mode and start the video deck record
operation.
• It is probably best to use auto play when recording camera images
to video tape, because it changes pages automatically at a preset
speed.
55
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Camera with a Connected Device
Connecting to Other Devices
4. Use the [+] and [–] buttons to move the pointer to the send icon.
Connecting to another CASIO Digital Camera
DIGITAL
5. After you make the setting you want, press the shutter button
again.
You can connect the camera to another CASIO digital camera and
exchange image data between them. Connect the DIGITAL terminals
of the two cameras using the optionally available SB-62 connecting
cable.
• Pressing the shutter button sends the selected image to the other
camera.
• You can send only one image at a time. To send more images,
repeat steps 2 through 5.
To connect the two cameras
To receive data to this camera from another camera
1. Turn both cameras off.
1. Set the function switches of both cameras to PLAY.
2. Connect the two cameras by plugging the optional SB-62 connec-
tion cable into their DIGITAL terminals.
2. Use the [+] and [–] buttons of other camera to find the image you
want to receive.
3. Turn both cameras on.
• You cannot receive images between two cameras while either of
their function switches is set to REC.
To send data from this camera to another camera
1. Set the function switches of both cameras to PLAY.
• You cannot receive multi-page display or zoomed images.
2. Use the [+] and [–] buttons of this camera to find the image you
want to send.
• If you try to receive a multi-page display or zoomed images, other
camera’s monitor automatically changes to normal display of page
1.
• You cannot send images between two cameras while either of their
function switches is set to REC.
3. Press the shutter button of this camera.
• You cannot send images while using the multi-page display or
zoom function.
3. Press the shutter button of this camera.
Send icon
Receive icon
Return to previous display
Send icon
Receive icon
4. Use the [+] and [–] buttons to move the pointer to the receive icon.
Return to previous display
• As soon as you perform the above step, all of the buttons and con-
trols on the other camera become disabled.
57
58
Using the Camera with a Connected Device
Connecting to Other Devices
5. After you make the setting you want, press the shutter button
again.
Computer (Using QV-Link Software and a Connection
Cable)
DIGITAL
• Pressing the shutter button receives the selected image from the
other camera.
The optionally available QV-Link Software and connection cable
lets you transfer images from your digital camera to a personal com-
puter. The following are the models of QV-Link software that sup-
port this camera.
* You can receive only one image at a time. To send more images,
repeat steps 2 through 5.
Windows Version: LK-10V/LK-1/LK-1A
Macintosh Version: LK-2V/LK-2/LK-2A
Important!
Never disconnect the cable, turn power off, or change the function
switch setting while a data communication operation is in progress.
Doing so can damage the camera.
VIDEO
Computer (Video Capture)
You can use the special video cable that comes with the camera to
connect directly to the VIDEO IN terminal of a personal computer
equipped with video capture capabilities.
How data transfer affects resolution
• QV-70
• QV-70
• QV-70
• QV-70
QV-700 ...................................................NORMAL
QV-700 ...................................................NORMAL
QV-100/QV-120/QV-200/QV-300 ..........NORMAL
QV-100/QV-120/QV-200/QV-300 ..........NORMAL
NORMAL
QUARTER
To transfer camera images to a personal computer (video
capture)
NORMAL
FINE
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the computer.
NORMAL
←
←
2. Enter the camera Playback Mode and display the image you want
to send.
• QV-70
QV-10/QV-10A/QV-11/QV-30/QV-70.... NORMAL
NORMAL
←
←
3. Perform the required operation on the computer.
Connecting to a QV Color Printer of Digital Photo
Printer
You can connect this camera to a CASIO QV Color Printer or Digital
Photo Printer and print out images that are in camera memory. Use
the communication cable that comes with the printer to connect the
camera’s DIGITAL terminal to the printer’s terminal.
• Consult the owner’s guide that comes with the computer or its video
capture board for details about how to set up to capture images.
DIGITAL
Important!
• With this configuration, you cannot send images from the personal
computer to the camera.
Applicable printer models: CASIO QG-100, DP-8000
• The camera can be connected directly to a personal computer or
video capture board that is equipped with a VIDEO IN terminal
(RCA pin jack). It cannot be connected directly to an S-VIDEO
terminal.
• After connecting to a printer, turn on camera power and slide the
function switch to the PLAY position. See the documentation that
comes with the printer you are using for details on its operation.
59
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Reference
Symptom
Poor LCD image Incorrect NORMAL/ Use NORMAL for scen-
Symptom
No power
Probable Cause
Action
Probable Cause
Action
1. Batteries not loaded 1. Correctly load batter-
correctly.
2. Dead batteries
ies (page 13).
focus
MACRO switch setting ery and group photos,
and MACRO for close-
2. Replace batteries with
new ones (page 13).
3. Use only recom-
mended AC adaptor .
ups (page 24).
3. Wrong AC adaptor
Poor color and Indoor fluorescent lighting Shoot under incandes-
brightness when
indoors
cent or other non-fluores-
cent lighting (page 23).
Sudden power 1. Operation of Auto 1. Turn power back on.
failure
Power Off
2. Low battery power
Use of manganese
batteries.
2. Replace all three bat-
teries with a set of new
ones (page 13).
Replace manganese
batteries with alkaline
batteries.
Recorded image Strong direct or reflected Change aperture setting
has greenish sunlight
tinge.
to [●] (F8). Note that this
condition is due to CCD
characteristics, and does
not indicate camera mal-
function.
indicator Power will automatically Replace all three batter-
Part of the im- 1. Blocking of the lens 1. Hold the camera cor-
on LCD
turn off shortly.
ies with a set of new ones
(page 13).
age is missing.
when recording.
rectly, making sure
that your finger or the
wrist strap is not block-
ing the lens.
No recording Function switch sets to Set function switch to
when shutter PLAY.
button is pressed
REC.
2. Failure to correctly 2. Take particular care
center the object when
aiming through the
viewfinder.
under the following
conditions, which can
cause the recorded im-
age to be slightly differ-
ent from the image that
appears in the view-
finder.
Power failure Low battery power
during self-timer
operation
Replace all three batter-
ies with a set of new ones
(page 13).
indicator on Over exposure
LCD
Change aperture switch
setting to [●] (page 26).
indicator on Under exposure
LCD
Change aperture switch
setting to [○] (page 26).
61
62
Troubleshooting
Action
Reference
Symptom
Symptom
Probable Cause
Probable Cause
Action
• Macro photography
For more precise im-
age composition, use
the LCD monitor
screen instead of the
viewfinder.
• Aiming at an angle that
is diagonal to the
viewfinder’s optical
axis.
All pages do not Protected memory pages Unhide protected memo-
appear during are hidden.
auto play.
ry pages (page 47).
Camera is con- 1. Function switch set to 1. Set function switch to
nected to a TV, REC PLAY (page 32).
but LCD monitor 2. Incorrect camera-TV 2. Connect correctly us-
contents do not
appear on TV
screen.
connection
ing the special video
cable that comes with
the camera (page 34).
3. Select the correct
channel for video play-
back. See the TV’s
user documentation for
details.
It is best to point the
lens directly at the sub-
ject, and not at an
angle.
3. Wrong TV channel
Color of recorded 1. Reflection from sun- 1. Reorient the camera
image is strange.
light or light from an-
other source
2. Difference between 2. This difference does
Record Mode and
Playback Mode char-
acteristics.
so that light is not shin-
ing directly into lens.
Some images Protected memory pages Unhide protected memo-
are missing.
are hidden.
ry pages by holding down
[–] while turning power on
(page 47).
not indicate a problem
or malfunction.
C a n n o t u s e Protected memory pages Unhide protected memo-
multi-page dis- are hidden.
play.
ry pages by holding down
[–] while turning power on
(page 47).
No [+]/[–] button Button operation during Wait until an image is on
operation during page change
multi-page dis-
play
the LCD before perform-
ing a button operation.
Cannot protect Protected memory pages Unhide protected memo-
memory pages. are hidden.
ry pages by holding down
[–] while turning power on
(page 47).
Cannot start Only one image in Auto play can be used
auto play opera- memory
tion
only when there are two
or more images in cam-
era memory.
63
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Action
Reference
Symptom
Symptom
Probable Cause
Probable Cause
Action
ALL DATA IS Protected memory pages Unhide protected memo-
C a n n o t e x - 1. Incorrect cable con- 1. Connect correctly
change data be- nection (page 57).
tween two cam- 2. Camera connected to 2. Turn power on after
eras is not turned on. connecting cable.
3. Function switch sets to 3. Set function switch to
REC. PLAY (page 32).
PROTECTED! are hidden.
Stays on moni-
tor and images
ry pages by holding down
[–] while turning power on
(page 47).
do not appear.
Delete operation 1. All pages are pro- 1. Unprotect the page
does not start
when DEL is
pressed.
tected.
you want to delete
(page 46).
Cannot transfer 1. Sending camera’s 1. Correct the situation
d a t a ( e r r o r memory is empty. and try again.
keeps occur- 2. Receiving camera’s 2. Correct the situation
ring) memory is full and try again.
3. Receiving camera’s 3. C h a n g e f u n c t i o n
2. Multi-page display 2. Change to a normal-
(page 36) or zoom dis-
play (page 40)
size, 1-page display
format.
function switch is in
REC position.
switch setting of re-
ceiving camera to
PLAY (page 32).
All buttons and Malfunction due to static Remove batteries and
switches do not electrical charge or strong disconnect the AC adap-
operate.
impact
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an autho-
rized CASIO service pro-
vider.
4. The message “ALL 4. The sending camera’s
DATA IS PROTECT-
ED” is on the monitor
of the sending camera.
protected memory
pages are hidden. Un-
hide protected memory
pages by holding down
[–] while turning power
on (page 47).
5. Replace batteries or
use the AC adaptor
(page 13).
Very bright or Wrong BRIGHT setting
very dark LCD
image
Adjust the BRIGHT set-
ting (page 11).
5. Low battery
6. Disconnection of cable 6. Securely reconnect the
No buttons or Malfunction due to expos- Remove batteries and/or
switches oper- ing camera to electro- unplug the AC adaptor.
during data communi-
cation
cable.
ate.
static charge.
Reload batteries and/or
plug in AC adaptor and try
operation again.
Keys of con- Connected camera op- Normal operation will re-
nected camera eration is disabled during turn when you exit data
are disabled.
data communications.
communications by press-
ing EXIT.
LCD monitor is Incorrect BRIGHT setting Adjust the BRIGHT
too bright or too
dark.
(brightness) setting.
65
66
Specifications
Messages
General
Recording System ... Digital (JPEG based)
Signal System ......... NTSC
MEMORY FULL
All 96 memory pages are used. Pages must be de-
leted (page 48) before further recording is possible.
Recording Medium .. Built-in 2MB flash memory
Number of Pages .... 96
MEMORY EMPTY
No images are stored in memory.
Delete Functions ..... Single page; All pages (with page protect feature)
Imaging Device ....... 1/5-inch CCD (Total Number of Pixels: 250,000)
Lens ........................ Fixed focus with macro position; F2.8/f = 5.2mm
Aperture .................. F2.8/F8 manual switching
MEMORY ERROR
#1
YES →＋
NO →CALL TECH
SUPPORT!
Problem with internal memory. Perform the following
procedure.
1. Press [+].
ERROR RESET
YES → SHUTTER
NO → CALL TECH
Focal Length ........... F2.8/NORMAL : 0.6m to 3.0m/2.0 to 9.8 feet
F2.8/MACRO : 12cm to 14cm/4.7" to 5.5"
SUPPORT
F8/NORMAL : 0.4m to ∞/1.3feet to ∞
2. After checking that the ERROR RESET message
is on the display, press the shutter button to per-
form a system reset or turn power off if you do not
want to perform a system reset. The display should
return to normal after the system reset is complete.
F8/MACRO
: 10cm to 18cm/3.9" to 7.1"
(from lens protection filter)
Light Metering ......... TTL center point by photographic element
Exposure Metering .. Aperture priority AE
Exposure Range ..... EV +6 to 18
•
Never turn off power while the system reset is in
progress! Doing so will damage camera memory
are require servicing by an authorized service
provider!
Exposure Adjustment ... -2EV to +2EV
Shutter System ....... Electronic
•
Be sure to power the camera using the AC adap-
tor or a new set of alkaline or lithium batteries.
Weak batteries or manganese batteries can re-
sult in a power failure while the system reset op-
eration is in progress, causing damage to cam-
era memory.
Shutter Speed ......... 1/8 to 1/4000 second
White Balance ......... Automatic
Self-timer ................. 10-second
Monitor .................... 61,380-pixel 1.8-inch TFT low-glare color LCD;
doubles as finder
Important!
Terminals ................ DIGITAL; VIDEO OUT; DC IN 6V
•
System reset can result in a change in the order of
images stored in camera memory.
Corrupted images may be lost entirely.
If image data is partially corrupted, parts of the im-
age may not be recoverable.
Power Supply .......... Batteries (AA-size Alkaline or Lithium batteries X 3)/
AC Adaptor (AD-C67)
•
•
Power Consumption .. 3.2 W
MEMORY ERROR
#2~#3
Problem with internal memory. Contact your dealer or
an authorized CASIO service provider.
CONSULT THE
OWNER’S MANUAL!
67
68
Download from Www.Somanuals.com. All Manuals Search And Download.
About the camera’s backlight…
Battery Life
• The camera is equipped with a fluorescent light source to provide
the back lighting for its LCD.
LCD OFF*
LCD ON*
REC
(one image per
10 seconds)
LR6(AM3)AA-size
alkaline batteries
1,600
images
400
images
• The normal service life of the backlight is approximately six years,
when the camera is used for about two hours a day.
FR6 AA-size
lithium batteries
2,200
images
800
images
• Should the LCD image appear abnormally dark, take the camera to
your dealer or an authorized CASIO service provider to have the
light source replaced. Note that you will be charged for this replace-
ment.
LR6(AM3)AA-size
alkaline batteries
270
minutes
70
minutes
PLAY
(Auto Play)
• Under very cold conditions, the backlight may require more time
than normal to light, or reddish bands may appear in the image.
These conditions do not indicate malfunction, and normal operation
should return at higher temperatures.
FR6 AA-size
lithium batteries
440
minutes
150
minutes
* Values in these columns are approximations intended for reference only.
Dimensions ............. 66(H) X 103(W) X 34(D)mm /
2.6" (H) X 4.0" (W) X 1.3" (D)
Weight ..................... Approximately 150g / 5.3oz (excluding batteries)
Accessories............. Wrist strap; soft case; special video cable; Alkaline
batteries (LR6 X 3); owner’s manual
• The liquid crystal panel built into this camera is the product of preci-
sion engineering, with an effective pixel rate of 99.99%. This also
means, however that 0.01% of the pixels can be expected to fail to
light or to remain lit at all times.
69
70
Download from Www.Somanuals.com. All Manuals Search And Download.
|