MA1106-EA
Operation Guide 3288
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
E-1
x Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
Contents
General Guide.......................................................................................................... E-6
Timekeeping............................................................................................................. E-8
World Time............................................................................................................. E-13
Stopwatch .............................................................................................................. E-15
Countdown Timer.................................................................................................. E-17
Alarms .................................................................................................................... E-19
Illumination ............................................................................................................ E-24
Reference ............................................................................................................... E-26
Specifications ........................................................................................................ E-29
E-2
E-3
To illuminate the display....................................................................................... E-25
To specify the illumination duration.................................................................... E-25
To turn the button operation tone on and off ..................................................... E-26
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-12
To view the time in another city code.................................................................. E-13
To toggle a city code time
between Standard Time and Daylight Saving Time........................................ E-14
To measure times with the stopwatch................................................................. E-16
To use the countdown timer................................................................................. E-17
To set the countdown start time .......................................................................... E-18
To set an alarm time.............................................................................................. E-20
To test the alarm.................................................................................................... E-21
To turn an alarm on and off.................................................................................. E-22
To turn the Hourly Time Signal on and off.......................................................... E-23
E-4
E-5
General Guide
x Press C to change from mode to mode.
x In any mode, press L to illuminate the display.
Timekeeping Mode
World Time Mode
Stopwatch Mode
Countdown Timer Mode
Alarm Mode
E-6
E-7
To set the time and date
Timekeeping
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Use the Timekeeping Mode to set and view the current
time and date.
PM indicator
Day of week
Day
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
x To view the current Home City code setting, press A
while in the Timekeeping Mode.
C
C
C
C
Seconds
C
City Code
DST
Year
Hour
Minutes
C
Seconds
Hour : Minutes
x For full information on city codes, see the “City Code
Table” at the back of this manual.
Day
Month
12/24-Hour Format
C
C
C
3. When the setting you want to change is flashing, use D and B to change it as
described below.
E-8
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 3288
To set an alarm time
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (–) to change it.
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (indicator not displayed) or p.m. (P indicator).
5. Press A to exit the setting screen.
1. In the Alarm Mode, use D and B to scroll through the
alarm screens until the one whose time you want to set
is displayed.
D
D
Alarm Operation
B
B
The alarm sounds at the preset time for about 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every five minutes, or until you turn the alarm off (page E-22).
x To stop the alarm tone after it starts to sound, press any button.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
D
B
B
D
B
B
D
D
x To set a one-time alarm, display one of the screens indicated by an alarm number
from
indicated by
through
.
. To set the snooze alarm, display the screen
Displaying the Timekeeping Mode setting screen (page E-9)
Displaying the snooze alarm setting screen (page E-20)
x The snooze alarm repeats every five minutes.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
x This operation turns on the alarm automatically.
E-20
E-21
To turn an alarm on and off
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D and B to select an alarm.
2. Press A to toggle it on ( displayed) and off
1. In the Alarm Mode, use D and B to select the Hourly
Time Signal ( ).
2. Press A to toggle it on ( displayed) and off
displayed).
x The Hourly Time Signal on indicator is shown on the
display in all modes while the Hourly Time Signal is
turned on.
Snooze alarm indicator
Hourly time signal
on indicator
Alarm on
indicator
(
displayed).
x Turning on a one-time alarm (
displays the alarm on indicator on its Alarm Mode screen.
) displays the alarm
through
)
(
x Turning on the snooze alarm (
on indicator and snooze alarm indicator on the Alarm
Mode snooze alarm screen.
x In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
x The alarm on indicator flashes while the alarm is
sounding.
x The snooze alarm indicator flashes during the 5-minute
intervals between alarms.
On/Off status
On/Off status
E-22
E-23
To illuminate the display
In any mode, press L to turn on illumination.
x You can use the procedure below to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press L, the illumination will remain on for about
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
Illumination
This watch has an EL (electro-luminescent) panel that
causes the entire display to glow for easy reading in the
dark.
To specify the illumination duration
Illumination Precautions
x The electro-luminescent panel that provides illumination
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
loses power after very long use.
x Illumination may be hard to see when viewed under direct
sunlight.
2. While the seconds are flashing, press B to toggle the
illumination duration between 1.5 seconds ( ) and
3 seconds ( ).
x The watch may emit an audible sound whenever the
display is illuminated. This is due to vibration of the
EL panel used for illumination, and does not indicate
malfunction.
3. Press A to exit the setting screen.
x Illumination automatically turns off whenever an alarm
sounds.
x Frequent use of illumination runs down the battery.
E-24
E-25
x Holding down C to turn the button operation tone on or off also causes the watch’s
Reference
current mode to change.
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
x The MUTE indicator is displayed in all modes when the button operation tone is
turned off.
Auto Return Features
Button Operation Tone
x If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it automatically changes to the Timekeeping Mode.
x If you leave a screen with flashing digits or a cursor on the display for two or three
minutes without performing any operation, the watch automatically saves any
settings you have made up to that point and exits the setting screen.
The button operation tone sounds any time you press one
of the watch’s buttons. You can turn the button operation
tone on or off as desired.
x Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
MUTE indicator
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls at high speed.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down C to toggle the button operation tone
on (MUTE indicator not displayed) and off (MUTE indicator
displayed).
E-26
E-27
Initial Screens
Specifications
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Accuracy at normal temperature: 30 seconds a month
Timekeeping: Hour, minutes, seconds, a.m./p.m. (P), day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes); Daylight Saving
Time (summer time)/Standard Time
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
World Time
x The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
x All World Time Mode times are calculated from the current Home City time in the
Timekeeping Mode using UTC time differential values.
x The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
rotation.
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 59'59.99"
Measuring modes: Elapsed time, split time, two finishes
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
E-28
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 3288
Alarms: 5 daily alarms (4 one-time alarms: 1 snooze alarm); Hourly Time Signal
Illumination: EL Backlight (electro-luminescent panel); Selectable illumination
duration
Other: Button operation tone on/off
Battery: One lithium battery (Type: CR1616)
Approximately 3 years on type CR1616 (assuming alarm operation 10 seconds per
day, and one illumination operation 1.5 seconds per day)
City Code Table
E-30
L-1
City
UTC Offset/
City
UTC Offset/
City Code Table
City
City
Code
GMT Differential
Code
GMT Differential
City
Code
UTC Offset/
City
UTC Offset/
City
City
DXB
KBL
KHI
MLE
DEL
DAC
RGN
BKK
SIN
HKG
BJS
SEL
TYO
ADL
GUM
SYD
Dubai
Kabul
Karachi
Male
Delhi
Dhaka
Yangon
Bangkok
Singapore
Hong Kong
Beijing
Seoul
Tokyo
Adelaide
Guam
+4
+4.5
NOU
WLG
Noumea
Wellington
+11
+12
GMT Differential
Code
GMT Differential
PPG
HNL
ANC
YVR
SFO
LAX
DEN
MEX
CHI
Pago Pago
Honolulu
–11
–10
–9
LIS
LON
BCN
PAR
MIL
ROM
BER
ATH
JNB
IST
Lisbon
London
Barcelona
Paris
Milan
Rome
0
+5
x ꢀBased on data as of December 2010.
x ꢀThe rules governing global times
(UTC offset and GMT differential) and
summer time are determined by each
individual country.
* In December 2007, Venezuela
changed its offset from –4 to –4.5.
Note, however, that this watch displays
an offset of –4 (the old offset) for the
CCS (Caracas, Venezuela) city code.
Anchorage
Vancouver
San Francisco
Los Angeles
Denver
+5.5
+6
+6.5
+7
–8
+1
–7
–6
Berlin
Athens
Mexico City
Chicago
+8
Johannesburg
Istanbul
Cairo
Jerusalem
Moscow
Jeddah
Tehran
MIA
Miami
+2
–5
NYC
CCS*
YYT
RIO
New York
Caracas
St. Johns
Rio De Janeiro
Praia
CAI
+9
–4
–3.5
–3
JRS
MOW
JED
THR
+9.5
+10
+3
Sydney
RAI
–1
+3.5
L-2
L-3
Download from Www.Somanuals.com. All Manuals Search And Download.
|