Decorative
4-Light Fixture
Installation Manual
Models 99087, 99088, 99089, 99090, 99091
Compatible with:
2xxxx Types A - Z
51000-58999 fan series
59500-59999 fan series
Select Casablanca Fans
MA004-01 • 07/24/13
Download from Www.Somanuals.com. All Manuals Search And Download.
1.888.830.1326
WHICH ASSEMBLY METHOD WILL I USE?
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
Switch
Housing
Screw
Switch
Housing
Cap
Switch
Housing
Cap
Cap
Screw
If your fan’s switch housing cap
If your fan’s switch housing cap resembles
this one, remove the whole switch
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the TYPE-A ASSEMBLY
INSTRUCTIONS on pages 4-5.
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the two cap screws from the
inside of the switch housing. Reinstall
the switch housing. Tighten the switch
housing screws. Then follow the TYPE-A
ASSEMBLY INSTRUCTIONS on pages 4-5.
Switch
Housing
Screw
Switch
Housing
Plug
Plug
Button
Screw
Button
If your fan’s switch housing cap
resembles this one, remove the whole
switch housing by removing the switch
housing screws with a Phillips head
screwdriver. Remove the plug button.
Then follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
If your fan’s switch housing cap resembles
this one, remove the whole switch
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the plug button using a standard
screwdriver. Then follow the TYPE-C
ASSEMBLY INSTRUCTIONS on pages 8-9.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TYPE-A ASSEMBLY INSTRUCTIONS
1
2
Light Kit
Screw
Switch
Housing
Wire
Connector
Remove the pre-installed light kit screws
and replace them with the longer light
kit screws provided.
If your fan does not have pin connectors on the
wires coming from the switch housing, install
the wiring harness provided. Using the provided
wire connectors connect the white wire from the
fan to the white wire from the wire harness and
connect the black or blue wire from the fan to
the black wire from the wire harness.
3
4
Light Kit
Screw
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
Lift the light kit up to meet the lower
switch housing. Align the light kit screws
with the threaded holes in the lower
switch housing. Tighten screws securely.
Do not allow the light kit to hang
only by the wire connections!
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
5
6
Socket
Shade
(sold separately)
Socket
Ring
Socket
Ring Tool
Installing the shades (sold separately)-
Remove the socket rings from the
sockets. Install each shade onto a socket.
Install the socket rings onto the sockets
by turning them clockwise using the
socket ring tool.
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
7
8
ON
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn on power. Your
installation is complete!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TYPE-B ASSEMBLY INSTRUCTIONS
1
2
Wire
Connector
Switch
Housing
If your fan does not have pin connectors
on the wires coming from the switch
housing, install the wiring harness
provided. Using the provided wire
connectors connect the white wire from
the fan to the white wire from the wire
harness and connect the black or blue
wire from the fan to the black wire from
the wire harness.
Feed the wires through the center hole in
the switch housing, the washer, and the nut.
Push the center hole in the gasket over the
threaded rod of the light kit. Then install the
switch housing by twisting clockwise onto
the threaded rod. Install the washer and nut
onto threaded rod and tighten securely.
3
4
Switch
Housing
Screw
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Do not allow the light kit to hang
only by the wire connections!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)
5
6
Socket
Shade
(sold separately)
Socket
Ring
Socket
Ring Tool
Installing the shades (sold separately)-
Remove the socket rings from the
sockets. Install each shade onto a socket.
Install the socket rings onto the sockets
by turning them clockwise using the
socket ring tool.
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
7
8
ON
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn on power. Your
installation is complete!
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TYPE-C ASSEMBLY INSTRUCTIONS
1
2
Washer
and Nut
Threaded
Rod
Switch
Housing
Wire
Connector
If your fan does not have pin connectors
on the wires coming from the switch
housing, install the wiring harness
provided. Using the provided wire
connectors connect the white wire from
the fan to the white wire from the wire
harness and connect the black or blue
wire from the fan to the black wire from
the wire harness.
Feed the wires through the switch
housing cap, washer, and nut. Then
install the switch housing cap by twisting
clockwise onto the threaded rod, making
sure the gasket stays in line with the top
of the light kit. Install the washer and nut
onto threaded rod and tighten securely.
3
4
Upper
Switch
Housing
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Do not allow the light kit to hang
only by the wire connections!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)
5
6
Socket
Shade
(sold separately)
Socket
Ring
Socket
Ring Tool
Installing the shades (sold separately)-
Remove the socket rings from the
sockets. Install each shade onto a socket.
Install the socket rings onto the sockets
by turning them clockwise using the
socket ring tool.
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
7
8
ON
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn on power. Your
installation is complete!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
1.888.830.1326
TROUBLESHOOTING
Lights don’t come on.
• Make sure that the bulbs are properly installed.
• Make sure power switch is on.
• Pull the pull chain to make sure it is on.
• Check the circuit breaker to ensure the power is turned on.
• Check the pin connections in the light kit.
• Refer to the fan manual for locating the fan’s wiring. Verify that the light and power
wires are correctly connected to the ceiling and the light kit.
ONE YEAR WARRANTY
This product is warranted to the original purchaser by Casablanca Fan Company/
Hunter Fan Company against defects in material and workmanship for one (1)
year from date of purchase. During the warranty period, we will repair or, at our
option, replace a defective product at no charge. For information on how to obtain
service, contact the Casablanca/Hunter Service Department by calling our toll-
free number at 888-830-1326. Damage to the product caused by mishandling,
improper installation or modification is not covered by this warranty. This warranty
is given in lieu of all other warranties expressed or implied. Some states do not allow
limitations of time on an implied warranty, therefore the above limitations may not
apply in every case. This warranty states specific legal rights which may vary from
state to state.
If you have problems installing or operating your light kit, do not return this product
to the dealer. Call our Consumer Affairs Hotline.
888-830-1326
Monday through Friday
8:00 am to 4:30 pm Central
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MA004-01 • 07/24/13
|