o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
DVD 8
All Format Disk Player
NOTE: Before installing your new DVD 8 player, please read this manual carefully
as it will inform you of the product specifications, proper installation and correct
operating procedures for your unit. Also included in this manual are guidelines
on how to service and care for your new Cary Audio Design product.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture. The lightning
flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated
dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.
Please refer to qualified personnel for service.
ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the component.
1. READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read
before power is applied to the equipment.
2. RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.
3. HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
5. CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended
by the manufacturer.
6. ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.
7. WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub; in a wet basement; or near a swimming pool.
8. ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,
causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the
manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the
unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should
not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should
be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.
10. GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact
a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
11. POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power
company.
12. POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or
pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience
receptacle, and the point where they exit from the unit.
13. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the
antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
14. LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power line surges.
15. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be
fatal.
16. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the unit.
18. SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
21. WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the
manufacturer.
22. HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units
(including amplifiers) that produce heat.
23. IMPORTANT SAFETY NOTE: Before connecting a new component such as the DVD 8 to your audio or home
theater system it is always good practice to make certain that all components are turned off, and preferably
unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that
may be activated during an installation, causing the potential for damage to electronic components and/or speakers.
Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such
damage.
Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this
product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in
your system.
AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not
come on, contact your authorized service representative.
Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing
by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables
inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.
Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet
may present a shock hazard, and any modification to the product will void your warranty. If water or any metal
object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source
immediately and contact Cary Audio for further instructions.
24. RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without
permission of the copyright holder.
25. NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to
article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry
as practical.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
26. FCC INFORMATION FOR USER:
CAUTION: ANY changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from where the receiver is connected.
27. OUTDOOR ANTENNA INSTALLATION/SAFE ANTENNA AND CABLE
CONNECTION: If an outside antenna or cable system is connected to
the equipment, be sure the antenna or cable system is grounded so as to
provide protection against built up static charges and voltage surges,
Section 810 of the national Electrical Code, ANSI/NFP A70 (in Canada,
part 1 of the Canadian Electrical Code) provides information with respect
to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Keep Antenna Clear of High Voltage Power Lines or Circuits
An outside antenna system should be located well away from power lines, electric light or power circuits and where
it will never come into contact with these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could
be fatal. Because of the hazards involved, antenna installation should be left to a professional.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
THANK YOU
Dear Cary Audio Customer:
We would like to thank you for your decision to buy a Cinema Series DVD 8 player. The DVD 8
offers superb audio quality playback of your CDs and DVDs, and has a fantastic picture to match.
Whether you are enjoying listening to your favorite artists through your CD and SACD collection,
or jumping out of your seat during an action movie with your family and friends, the DVD 8 is
sure to perform at the highest level.
The all format player has an exceptionally fast and dependable drive mechanism. We have
chosen to use a non-ferrous (non-magnetic) aluminum chassis, top cover and front panel for
improved noise shielding and have also included a shielded power supply to help eliminate
interference in the audio, video and digital sections. This means that you can enjoy your music
and movies the way they were intended, without distraction from outside noise or interference.
We are very excited about the design of this player and the performance quality it offers our
customers. We pride ourselves in the details, making sure that each unit off the assembly line
has been built to exacting standards, providing you with years upon years of great fun in your
home with the DVD 8 player.
Thank you for supporting Cary Audio Design!
The Cary Audio Team
PRODUCT FEATURES
The DVD 8 is an amazing all format disk player. The excellent sound quality is matched with a
great picture. It will scale video signal outputs to as high as 720p or 1080i, offering both stereo
and 5.1 analog audio outputs. It has HDMI for ease of use with new HD flat panel displays, as
well as component video, S-Video and composite video outputs. The sleek style and overall
performance of the DVD 8 will appeal to all home cinema fans and to audiophiles who want
the multi channel playback capabilities the DVD 8 offers.
The range of multi channel DVD Audio disks has increased quite a bit in recent years. The live
concert video disks that are coming out now are fun and they look great. The multi channel
SACD disks have expanded in numbers as well. These new disk releases have led us to
design and offer the DVD 8 player. It will be a great way to have flexibility, excellent sound
quality and convenience as a playback component in anyone’s home audio or video system.
Owners will be thrilled with the all format sound and vision experience of the DVD 8.
The DVD 8 offers:
• HDMI Video outputs from 480i to 480p, 720p or 1080i settings
• Rugged aluminum chassis for improved noise shielding
• Offers unprocessed 480i video in HDMI output for use with external video scalers
• Shielded power supply to eliminate interference in the audio, video or digital sections
• Stereo and 5.1 surround sound variable volume analog outputs
• CD, DVD, SACD and DVD Audio playback capabilities
• Variable analog volume control for analog outputs
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
UNPACKING AND INSTALLATION
This section describes the unpacking and installation procedures for your new component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling
should be evident upon inspection of the shipping container. If shipping damage is found after
visual inspection, take care not to destroy the evidence. If necessary, document the damage with
photographs and contact the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your
component from damage should you wish to store it or ship it at a later date.
In the Box
When unpacking your DVD 8 player, make sure the following accessories are included. You
should find the following items:
•
•
•
•
Power Cable
Remote Control (batteries already installed)
Owner’s Manual
Warranty Card
Warranty Card
If you are the original purchaser of this unit and you purchased it in the United States, you
should fill out the enclosed warranty registration card and return it to Cary Audio Design within
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing
cartons in case you ever need to ship the unit when moving to a new home. Warranty
restrictions apply. Consult the warranty section of this manual for details. Please be certain to
keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to
validate the warranty if ever needed.
FORMAT PLAYBACK COMPATIBILITY
The Cinema DVD 8 can play DVD Video, Video CD, CD, DVD-RW, DVD+RW, CD-RW, DVD-Audio,
and SACD disks.
It incorporates technology from Dolby Laboratories®, Digital Theater Systems®, and the High
Definition Multimedia Interface.
*All trademarks belong to their original owners.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Operating the DVD 8 player is a simple procedure. It is designed for long term stability in virtually
any home operating environment. However, if the unit is operated outside the parameters
outlined in this owner's manual, damage may result. Please read this manual carefully before
putting your new DVD 8 player into operation.
The following section describes the DVD 8 players’ basic specifications. The specifications are
subject to change without notice or obligation.
VIDEO SPECIFICATIONS
...........................................................................................................................................................................
Playback System
DVD Video / Video CD / CD / DVD-RW / DVD+RW / CD-RW /
DVD-Audio / SACD
...........................................................................................................................................................................
Video DAC chips
12 bit/108 MHz
...........................................................................................................................................................................
Video S/N Ratio
70 dB
...........................................................................................................................................................................
Video Signal Resolution
540 TV Lines (DVD)
...........................................................................................................................................................................
Signal Format System
PAL / NTSC
...........................................................................................................................................................................
Composite Video Output
1.0 volt peak to peak (75 Ohm), Sync Negative
...........................................................................................................................................................................
S-Video
Luminance Signal: 1 volt peak to peak (75 Ohm load)
Color Signal: 0.286 volt peak to peak (75 Ohm load)
...........................................................................................................................................................................
Component Video Output
Y Output Level: 1.0 volt peak to peak (75 Ohm load)
Pb Output Level: 0.7 volt peak to peak (75 Ohm load)
Pr Output Level: 0.7 volt peak to peak (75 Ohm load)
...........................................................................................................................................................................
AUDIO SPECIFICATIONS
...........................................................................................................................................................................
Master Clock Jitter
Below measurable levels
...........................................................................................................................................................................
Digital/Analog Converters 24 bit/192 kHz Cirrus Logic 4360
...........................................................................................................................................................................
Analog Outputs
RCA 5.1 & 2 channel, separate output sets
...........................................................................................................................................................................
Frequency Range
2-22 kHz Fs = 48 kHz
2-44 kHz Fs = 96 kHz
...........................................................................................................................................................................
Amplifier Linearity
0.5 dB (20 Hz – 20 kHz)
...........................................................................................................................................................................
Phase Linearity
3.0 degrees (20 Hz – 20 kHz)
...........................................................................................................................................................................
Dynamic Range
106 dB (1 kHz)
...........................................................................................................................................................................
Signal-to-Noise Ratio
106 dB (1 kHz)
...........................................................................................................................................................................
Channel Separation
>95 dB (1 kHz)
...........................................................................................................................................................................
Total Harmonic Distortion 0.008% (1 kHz)
...........................................................................................................................................................................
Audio Output Level
2.0 V rms
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
DIGITAL AUDIO OUTPUT SPECIFICATIONS
...........................................................................................................................................................................
Coaxial Digital
Dolby Digital / DTS / LPCM 200 mV rms. @ 75 Ohms
...........................................................................................................................................................................
Optical Digital
Dolby Digital / DTS / Toslink
...........................................................................................................................................................................
AC Power
100 - 240 Volts AC
...........................................................................................................................................................................
Power Consumption
20 watts - Operation
3 watts - Standby
...........................................................................................................................................................................
Video Output Modes
Component Video: 480i, 480p, 720p, 1080i
HDMI with HDCP: 480i, 480p, 720p, 1080i
Composite Video, S-Video: 480i
...........................................................................................................................................................................
Chassis
Black aluminum chassis
Silver anodized aluminum front panel (black optional)
Available by special order - ‘2 U’ rack mount face plate
...........................................................................................................................................................................
Weight
15 lbs.
...........................................................................................................................................................................
Dimensions
17.5" W x 2" H x 10.5"
...........................................................................................................................................................................
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
To accommodate a wide range of home entertainment systems, this player features numerous
types of connections for both audio and video. Please continue reading this section for help
determining the best possible connections for your system.
BEFORE CONNECTING
Read the instruction manuals of any component that you plan to connect to the DVD 8 player.
For all components, turn the power off and unplug them from the wall outlet before making any
connections.
Connect the DVD 8 player to the TV directly. If you connect the DVD 8 player to a VCR, TV/VCR
combination, or video selector, the playback picture may be distorted as DVD Video images are
copy protected.
Please note that video connections to a TV or monitor are necessary because some discs require
on-screen menu interaction before they can be played.
CONNECTIONS TO A TV
Using the Audio/Video Connection Cable
Using the audio/video cable (Three RCA cables with left and right audio plus one video cable,
not included), make audio connections from the ANALOG OUTPUT L and R jacks to the
corresponding audio input jacks on the TV. In the same manner, make the composite video
connection from the COMPOSITE VIDEO OUTPUT video jack to the corresponding video input
jack on the TV. Be sure to set Audio Setup > Speaker Setup Select to "Movie Stereo" using the
on-screen setup menu.
Note: Be sure to match the colors of the plugs on the cable with the corresponding
jacks on the DVD 8 player and the TV: yellow for composite video, red for R (right)
audio and white for L (left) audio.
Connecting DVD 8 with an HDMI connection
The DVD 8 has a High Definition Multimedia Interface (HDMI) version 1.1 digital video and audio
output connection to make it easy to connect to a compatible companion surround sound
component or video display. By connecting the HDMI cable from the DVD 8 to your HDMI
equipped video display, surround sound processor, preamplifier or AV receiver you will have the
capability to playback the digital sound and digital video signal from your favorite movies or CD
disks. The HDMI connection keeps the digital video signal intact until it is converted from a digital
signal inside your display into an analog signal on the screen. This eliminates converting the
digital video into an analog video signal in the DVD 8, sending it as an analog video signal to the
display where it is converted back to digital and then analog again inside the display. In most
cases this will be the best possible video signal for your display.
NOTE: If your HDMI equipped component does not have High bandwidth Digital Copy
Protection (HDCP) capability to make a ‘digital handshake’ with the DVD 8 then the
HDMI output will NOT provide an output signal to your HDMI equipped companion
component. Use the component video outputs and either the coaxial or optical digital
audio outputs in this situation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
HDMI cables are available from your dealer and should not be more than 15’ (4.5 m) in length
without having special signal repeaters ‘in line’ to make the signal go further. HDMI to DVI-D
connectors will possibly work with the HDMI connector on the DVD 8 but they must provide the
‘digital handshake’ to the DVD 8 before it will offer an output signal from the HDMI connector.
For DVD Audio or SACD disk playback the 5.1 channel analog outputs will need to be connected
to the companion component. (See OPTIONAL AUDIO CONNECTIONS for DVD Audio and SACD 2
channel stereo or 5.1 channel playback set up information.)
OPTIONAL VIDEO CONNECTIONS
Visible improvement in video quality, when compared to composite video connections, can be
achieved by making either S-Video or component video connections to a TV or monitor
compatible with these connections. When either S-Video or component video connections are
made, it is not necessary to make composite video connections using the yellow cord of the
audio-video cable.
Making Component Video Connections
If the TV or monitor has component video inputs, making this type of video connection will
produce the ideal picture quality for the presentation of DVD video. Using a component video
cable (not included), connect the COMPONENT VIDEO OUTPUT jacks to the corresponding
component video input jacks on the TV. Actual labels for component video inputs may vary
depending on the TV manufacturer. (E.g. Y, R-Y, B-Y or Y, CB, CR) Component video cables
are typically designated with red (R), blue (B), and green (G) color bands to show how to
correctly connect them to the player and the TV. The rear panel plugs on the DVD 8 have
red, blue and green color inserts to assist in correct color connections to your display.
In some TVs or monitors, the colors levels of the playback picture may be reduced slightly or
the tint may change. In such a case, adjust the TV or monitor for optimum performance. Be
sure to set Audio Setup > Speaker Setup Select to "Stereo" using the on-screen menu.
Making S-Video Connections
If the TV or monitor has an S-video input, making this type of video connection will produce
improved picture quality over a composite video connection. Using an S-video cable, connect
the VIDEO OUTPUT S-Video jack to the corresponding S-video input jack on the TV. Be sure
to set Audio Setup Speaker Setup Select to "Stereo" using the on-screen menu.
OPTIONAL AUDIO CONNECTIONS
The DVD 8 player provides numerous ways to take full advantage of the digital multi-channel
sound recorded on DVD media.
When listening to CD Audio
For CD Audio media, it is recommended to make connections from the Left and Right
ANALOG OUTPUT jacks to the Left and Right DVD or CD player input connections on your
preamplifier, AV Receiver or surround processor.
When listening to stereo or 5.1 DVD Audio or SACD disks
For DVD Audio or SACD media, it is recommended to make connections from the Left and
Right ANALOG OUTPUT jacks to the Left and Right CD player input connections on your
preamplifier, AV Receiver or surround processor. If you wish to enjoy 5.1 surround sound
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
playback then the 5.1 analog outputs will need to be connected to the 5.1 analog bypass
inputs of the companion surround sound preamplifier, processor or AV receiver. Please make
sure you have the correct channels plugged into the Front Left, Front Right, Center, Left and
Right Surrounds and the Sub Woofer connections on the DVD 8 and the companion surround
sound component.
Note: Be sure to match the colors of the plugs on the cable with the corresponding
jacks on the DVD player and the stereo component: red for Right audio and white for
Left audio. Do not make connections to the PHONO input jacks on the stereo
component, as it is not compatible with regular line level inputs.
Digital Connections
Make digital connections from the DVD player to an AV component that features digital input
capability or one or more multi-channel audio decoders to realize the full cinematic
experience made possible by the DVD format. This DVD player features one set each of an
optical and a coaxial digital audio output jack and can output Dolby Digital, DTS and PCM bit
streams. Make connections from the DIGITAL OUTPUT OPTICAL (Toslink) jacks to the digital
optical input jack on the AV component using an optical fiber cable (sold separately). Make
connections from the DIGITAL OUTPUT COAXIAL jacks to the digital coaxial input jack on the
AV component using a coaxial cable (sold separately). It is not necessary to make more than
one type of digital connection to a single component, when you are making connections to
an amp or receiver that has internal Dolby Digital or DTS decoding capabilities.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
FRONT PANEL
1. POWER
• Press once to turn the power ON.
• Press again to turn the power OFF. The DVD 8 will enter into STANDBY and the blue
POWER LED will light.
2. DISC LOADER TRAY
• Load discs here.
3. OPEN
• Press this button to open and close the disc loader tray.
4. PLAY
• Press this button to start playback.
5. STOP
• Press this button to stop playback.
6. ALPHANUMERIC Display
A multi-character display providing information on the operation of the DVD 8 player.
7. POWER Indicator
• This LED lights when the player is turned OFF.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
REAR PANEL
1. POWER INPUT (AC IN)
• Connect to an AC power supply using the included power supply cord. Aftermarket AC
power cables may also be used. Consult your dealer for advice.
2. HDMI OUTPUT JACK
• Use HDMI to connect to a compatible TV, Video Monitor, surround preamplifier or AV
receiver that has an HDMI input. This can be set to 480i, 480p, 576p, 720p or 1080i in
resolution in the Set Up menu. Please be aware that trying to operate your
video display at a setting higher than it is meant to operate may damage it.
Please read your TV or video display owner’s manual carefully for the possible settings
it will accept.
3. STEREO OUTPUTS
• Mixed or stereo Left and Right Audio Output jacks that are configured in the on screen
display (OSD) SET UP menu. These are in addition to the 5.1 analog outputs.
4. 5.1 ANALOG OUTPUTS
• Front Left, Front Right, Surround Left and Right, Center and Sub Woofer outputs for
the multi channel playback of movies, DVD Audio or SACD disks.
5. S-VIDEO OUTPUT
• Use this analog video output for a video display that has an S-Video connector as its’
best video input connection. This output is 480i or 576i in resolution. (NTSC/PAL)
6. COMPOSITE VIDEO OUTPUT
• This analog video output is for use with older design video displays. Both the S-Video
and the component video outputs offer a better quality video signal to a compatible
video display. This output is 480i or 576i in resolution. (NTSC/PAL)
7. COMPONENT VIDEO (Y, Pb, Pr) JACKS
• The component video connections offer the best quality analog video output from the
DVD 8. The connections have a Red, Green or Blue (RGB) colored insert inside them to
make proper connections easier to do. This can be set to 480i, 480p, 576p, 720p or
1080i in resolution. Be aware that trying to operate your video display at a
setting higher than it is meant to operate may damage it. Please read your TV
or video display owner’s manual carefully for the possible settings it will accept.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
8. COAXIAL DIGITAL AUDIO JACK
• Connect this to your compatible surround sound preamplifier, processor or AV receiver.
Use only one of the digital audio connections, either the optical video output or the
coaxial (RCA) digital output. This connection offers the digital audio signal to your
associated surround sound component.
9. OPTICAL DIGITAL AUDIO JACK
• Connect this to your compatible surround sound preamplifier, processor or AV receiver.
Use only one of the digital audio connections, either the optical video output or the
coaxial (RCA) digital output. This connection offers the digital audio signal to your
associated surround sound component.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
REMOTE CONTROL
This section explains how best to use the remote control to set up and operate the DVD 8 player.
1. POWER – Power ON; toggle STANDBY
2. MEMORY – Save/jump to playing point
3. AUDIO ONLY – Turn video On/Off
4. VOLUME - – Decrease volume
5. NUMBERS – Enter numeric title or track
number values
6. TITLE – Show DVD title menu
7. ARROWS – Navigate the menu selection
8. SELECT – Confirm the menu selection
9. SETUP – Enter the player setup menu
10. SUBTITLE – Change subtitle language /
Switch picture display mode
11. AUDIO – Change the audio language or
channel
12. PLAY/PAUSE – Start or pause playback
13. STOP – Stop playback
14. REV – Fast reverse playback
15. FWD – Fast forward playback
16. PREV – Skip previous track or title
17. NEXT – Skip next track or title
18. OSD – Show/hide On-Screen Display
19. KEYBOARD – Show/hide virtual
keyboard
20. HDMI – Switch HDMI output resolution
or display the current output setting
21. P/N – Switch output TV system:
NTSC, PAL or AUTO
22. SLOW – Slow playback
23. REPEAT – Repeat playback
24. A-B – Repeat play the selected A-B
section
25. GOTO – Play from a specified location
26. ANGLE – Change camera angles on some DVD disks
27. ZOOM – Zoom the video image In/Out
28. RETURN – Return to the previous menu
29. MENU – Show DVD menu
30. CLEAR – Clear input numbers
31. VOLUME + - Increase volume
32. MUTE – Mute the audio outputs
33. INFO – Display disc information
34. PSM – Power Spectrum Meter On/Off
35. EJECT – Open/Close the disc tray
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
SWITCHING ON
After making sure that everything is connected properly and that the player is plugged in, press
the POWER button on the front panel to turn the player on. Turn on your TV and make sure that
it is set to the correct input for the DVD 8. The video display should be ON first if you are using
the HDMI connection so that the HDCP copy protection “handshake” happens with the DVD 8.
The front panel POWER button switches the player ON and OFF. When the player is OFF, it can
be turned ON using the front panel button or the ON button on the remote control. When the
player is ON, you can put it into STANDBY using the POWER button on the remote control
handset or the front panel button.
USING THE ON-SCREEN DISPLAYS
For ease of use, this player makes extensive use of
graphical on-screen displays (OSDs).
To access the On-Screen Displays, press the SETUP
button on the remote control.
The SETUP menu screens are navigated in a similar way, using the cursor buttons to change the
highlighted item and pressing ENTER to select it. The icons above are located across the top of
the SETUP screen. See “Choose the Setup Menu” under “Changing the Default Settings” for more
information on each of these icons. Familiarize yourself with how these work as you'll need to use
them when setting up the player, or when using some of the playback features and making more
advanced settings for audio and video.
CHANGING SETTINGS TO MATCH YOUR TV
Using the SETUP menu, you can determine the settings that best fit your TV and system. Press
the SETUP button. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and RIGHTꢃcursors buttons to select
the desired setting.
1. Select GENERAL SETUP.
2. Select TV DISPLAY.
If you have a widescreen or 16x9 TV, select the Wide setting. Widescreen DVD software
is shown using the full screen area. When playing software recorded in conventional (FS
or full screen, 4x3) format, the settings on your TV will determine how the material is
presented. See the manual that came with your TV for details on what options are
available.
If you have a conventional or 4x3 TV, select either LetterBox or Pan/Scan. In Letterbox
mode, widescreen software is shown with black bars at the top and bottom of the
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
screen. Pan and Scan selects the center of the scene of widescreen material to make it fit
the NORMAL screen (so even though the image looks larger on the screen, you're
actually seeing less of the complete picture). Press ENTER to save the setting.
3. Select the desired display option. The options are:
• 4:3 Pan/Scan – 4:3 TV Pan and Scan. Choose when the display is 4:3. Both sides of
widescreen image are clipped.
• 4:3 Letterbox – 4:3 TV Letterbox. Choose when the display is 4:3. Widescreen image
is displayed in “letterbox” format with black borders on top and bottom.
• 16:9 Wide – Choose when the display is 16:9. 16:9 materials will be displayed in its
native aspect ratio, and 4:3 materials will be stretched.
• 16:9 Wide/Auto – 16:9 TV Wide/Auto Mode. Choose when the display is 16:9. 16:9
materials will be displayed in its native aspect ratio, and 4:3 materials will be displayed
with black borders on both sides to maintain 4:3 aspect ratio.
Once you have made your changes, the settings are retained until they are changed again, even
when the power is turned OFF.
Note: For some menus, the initial values can be changed during playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
CHOOSE THE SETUP MENU
The SETUP menu allows you to make alterations to the video, audio, disc, progressive and AV
Sync settings. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and RIGHTꢃcursors buttons to select the
desired setting. Press ENTER to save changes in settings. Press the SETUP button and the
following options appear across the top of the screen:
1. General Setup
2. Speaker Setup
3. Audio Setup
4. Video Setup
5. Preference Setup
GENERAL SETUP
Choose the first icon in the top left corner of the Setup
menu for GENERAL SETUP options. Use the UPꢀ,
DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to
navigate the options within General Setup. When making
changes, navigate to the desired selection and press
ENTER. The options for that setting will appear on the right.
Use the RIGHTꢃ, UPꢀ and DOWNꢁ, cursor buttons
to make your selection. Press the LEFTꢂarrow to return
to the list of options within General Setup. To exit General
Setup, press the LEFTꢂarrow to navigate back to the top
icon setup menu.
GENERAL SETUP OPTIONS:
...........................................................................................................................................................................
TV DISPLAY (Default: 16:9 Wide)
See “Changing Settings to Match Your TV” in the previous section GETTING STARTED for details.
...........................................................................................................................................................................
OSD LANG (Default: English)
On-Screen Display Language. Use to set the language of on-screen displays, menus and prompts.
...........................................................................................................................................................................
SCREEN SAVER
Use this to make sure a constant image is not displayed for too long a time, possibly creating
“Burn In” on the video display. The options are:
• ON (default) - A moving logo will appear after 2 minutes of inactivity.
• OFF - Turns off the screen saver function. To avoid Burn In, Screen Saver ON is strongly
recommended.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
ANGLE MARK
Use this to set the MULTI-ANGLE camera scenes on some DVD Discs. The options are:
• ON – Offers multi-angle camera scenes on some DVD discs.
• OFF (default) - Turns off the angle mark on screen.
...........................................................................................................................................................................
SACD PRIORITY
Use this to select which audio tracks to play for SACD (Super Audio CD). The options are:
• Multi-Channel (default) – Play the multi-channel surround audio
• 2-Channel – Play the 2-channel stereo audio
• CD MODE – Play the CD layer of a hybrid SACD disc
...........................................................................................................................................................................
DVD-AUDIO MODE
Use this to select which portion of a DVD-Audio disc to playback. The options are:
• DVD-Audio (default) – Play the DVD-Audio portion of the disc with surround audio
• DVD-Video – Play the DVD-Video portion of the disc with Dolby Digital or DTS audio
...........................................................................................................................................................................
SUBTITLE FONT
Use to select which font you want to use for the Subtitles. The options are:
• Font 1
• Font 2
• Font 3 (default)
SPEAKER SETUP
Choose SPEAKER Setup and press ENTER. Use the UPꢀ,
DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to
navigate the options within SPEAKER Setup. When making
changes, navigate to the desired selection and press
ENTER. Press the LEFTꢂarrow to return to the list of
options within SPEAKER Setup. To exit SPEAKER Setup,
press the LEFTꢂarrow to navigate back to the top icon
setup menu.
SPEAKER SETUP OPTIONS:
...........................................................................................................................................................................
DOWN-MIX
Use this to set the audio down-mix mode to convert multi-channel audio into two-channel output.
This setting only affects the “Mixed L/R” analog audio outputs. The options are:
• Left/Right - Left and Right channels only. This mode is intended for use with two-channel
Dolby Pro Logic receivers. If the content is encoded with Dolby Pro Logic then the encoded
audio will be passed to the receiver for Dolby Pro Logic processing. For stereo content the
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
output will be stereo. For multi-channel content only the left front and right front channels
will be re-produced.
• Stereo (default) - This mode down-mixes decoded multi-channel (5.1ch) audio to 2-
channel stereo output. For stereo content the output will be stereo. For multi-channel
content the surround and center channels will be mixed with the left and right front
channels. Recommended for use with TV sets or stereo receiver/amplifiers.
• V. Surround - Virtual Surround. This mode creates a virtual surround effect from stereo or
multi-channel audio contents.
• 5.1 CH – This mode enables 5.1ch decoded analog audio output. The number of actual
output channels depends on the disc.
...........................................................................................................................................................................
FRONT SPEAKER
Use this to set the sound filtering control for the front speakers. The options are:
• Large (default) – Choose if the front speakers are large. Bass frequencies are passed to
the front speakers.
• Small – Choose if the front speakers are small. Bass frequencies are not passed to the
front speakers to reduce possible distortion.
...........................................................................................................................................................................
CENTER SPEAKER
Use this to set the sound filtering control for the center speaker. The options are:
• Large – Choose if the center speaker is large. Full frequency range sound is passed to the
center speaker.
• Small (default) – Choose if the center speaker is small. Bass frequencies below the
crossover frequency are not passed to the center speaker to reduce possible distortion.
• Off – Choose if there is no center speaker.
...........................................................................................................................................................................
REAR SPEAKER
Use this to set the sound filtering control for the rear speakers. The options are:
• Large – Choose if the rear surround speakers are large. Full frequency range sound is
passed to the rear speakers.
• Small (default) – Choose if the rear surround speakers are small. Bass frequencies are
not passed to the rear speakers to reduce possible distortion.
• Off – Choose if there are no rear speakers.
...........................................................................................................................................................................
SUBWOOFER
Use this to enable/disable the subwoofer output. The options are:
• On – Subwoofer output is enabled.
• Off (default) – Subwoofer output is disabled.
...........................................................................................................................................................................
CHANNEL DELAY
Use this to set the delay time for the center, rear speakers and the subwoofer. The delay is to
compensate for the audio propagation time difference caused by the distance difference of the
speakers to the listener.
• Press the UP/DOWN ARROW buttons to select the speaker to set the distance difference.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
• Press the LEFT/RIGHT ARROW buttons to set the distance difference.
• Press the SELECT button to confirm the settings and return to the Speaker Setup Page.
• The channel delay is the difference between the distance from the listener to the front
speakers and the distance from the listener to the speaker to be configured.
• The distance between the surround speakers and the listener must be less than or equal to
the distance from the front speakers and the listener.
...........................................................................................................................................................................
CHANNEL TRIM
Use this to set the volume of each individual channel.
• Press the LEFT/RIGHT arrow buttons to select the channel to be adjusted.
• Press the UP/DOWN arrow buttons to raise or lower the volume of the selected channel.
• Press the SELECT button to confirm the settings and return to the Speaker Setup Page.
...........................................................................................................................................................................
AUDIO DELAY (Default: 00)
Use this to synchronize the audio and video signal.
• Adjust the audio delay by 10–100 ms to correct synchronization issues with some discs.
• Press the LEFT/RIGHT arrow buttons to increase or decrease the Audio Delay.
AUDIO SETUP
Choose Audio Setup and press ENTER. Use the UPꢀ,
DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to
navigate the options within Video Setup. When making
changes, navigate to the desired selection and press
ENTER. Press the LEFTꢂarrow to return to the list of
options within Audio Setup. To exit AUDIO Setup, press the
LEFTꢂarrow to navigate back to the top icon setup menu.
AUDIO SETUP OPTIONS:
...........................................................................................................................................................................
DIGITAL OUTPUT
The options are:
• RAW (default) – Use this setting for Dolby Digital movie playback.
• PCM (Pulse Code Modulation) – Digital out for CDs.
...........................................................................................................................................................................
LPCM RATE
Use this to set the maximum Linear PCM output frequency. The options are:
• 48K (default) – Supported by most equipment.
• 96K – Better sound can result. Ensure that the receiver/amplifier can support it.
• 192K – The best sound possible. Ensure that the receiver/amplifier can support it.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
The DVD 8 will automatically set the digital to analog converter (DAC) sample rate to match the
data rate of any CD, DVD-Audio or DVD disk it is playing (48, 96, 192 kHz) when you have the
audio turned ON for the HDMI section. If you wish to control the sample rate manually you need
to first set the HDMI audio to OFF. Then the LPCM setting will be highlighted and it will become
adjustable for the analog outputs sample rate.
If you intend to use HDMI with the DVD movie soundtrack audio going along with the video to a
display or surround sound processor then this LPCM setting will not be available.
...........................................................................................................................................................................
PRO LOGIC II
Use this to configure the Dolby Pro Logic II function. Dolby Pro Logic II technology can expand
2-channel source audio into full 5-channel surround sound.
• Pro Logic II is effective only when down-mix is set to 5.1ch and SPDIF output is set to Raw.
• Press the SELECT button to enter the Pro Logic II setup page.
• Press the LEFT ARROW button to exit the Pro Logic II setup page.
A. Pro Logic II: To turn on or off the Pro Logic II processing. The options are:
• On – Pro Logic II processing is always on
• Off (default) – No Pro Logic II processing
• Auto – Pro Logic II processing is on only when Dolby Pro Logic II encoded content is
detected.
B. Mode: To set the processing mode of Pro Logic II. The options are:
• Music – Sound from all speakers arrive at the same time with no delay
• Movie – 10ms delay is added to the surround channels
• Pro Logic – Earlier version of Dolby Pro Logic processing
• Auto – Automatically selects processing mode based on content
C. Panorama: To turn on/off panorama mode. When turned on, front stereo audio is
extended to the surround channels for an enveloping effect.
D. Dimension: To increase or decrease the dimensional effect by adjusting the front to rear
balance. As the size number increases, the sound localization moves from the rear toward
the front of the room.
E. Center Width: To control the width of the center channel sound effect by blending the
center speaker to the left and right speakers. As the level number increases, the center
channel sound moves toward the left and right speakers.
...........................................................................................................................................................................
DOLBY DIGITAL SETUP
Use this to configure the Dolby Digital decoder.
• Press the SELECT button to enter the Dolby Digital Setup page.
• Press the LEFT ARROW button to exit the Dolby Digital Setup page.
A. Dual Mono: To choose the output for Dolby Digital discs encoded with two independent
audio channels, such as bilingual programs. The options are:
• Stereo (default) – Stereo output
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
• L-Mono – Left channel output to both Left and Right speakers.
• R-Mono – Right channel output to both Left and Right speakers.
• Mix Mono – Left and Right channels mixed to both Left and Right speakers.
B. Dynamic: To set the Dynamic Range Compression (DRC). DRC can smooth out the sonic
peaks and valleys common with wide-range digital audio. Increasing DRC may make low
level audio more audible during low-level listening. Decreasing or turning off DRC restores
the sonic energy present in the original recording. This function is also useful for late night
viewing of movies to keep the dialogue easy to understand while reducing the overall
dynamic range of the movie.
...........................................................................................................................................................................
HDMI AUDIO
Use this to select digital audio output from the HDMI port. The options are:
• Auto – This setting allows the DVD 8 to select the digital output signal from the current
disk automatically. It will choose whatever is offered by the disk that is currently playing.
Choices include either a RAW digital signal (for DTS and Dolby Digital encoded signals) or a
Linear Pulse Code Modulation (LPCM) digital output signal like a CD disk sends out to an
external digital input in an associated receiver or preamplifier.
• LPCM (default) – See LPCM above. This setting will convert the digital signal from the
disk to LPCM and offer that digital output signal to the associated receiver or preamplifier.
• Off – This setting will offer digital video output only without any digital audio signal.
Choosing this setting will require that the DVD 8 also have a digital input connection to the
associated receiver or preamplifier. This connection can be either an optical digital
(TOSLINK) or a coaxial digital RCA connection for the digital audio signal.
VIDEO SETUP
Choose VIDEO Setup and press ENTER. Use the UPꢀ,
DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to
navigate the options within VIDEO Setup. When making
changes, navigate to the desired selection and press
ENTER. Press the LEFTꢂarrow to return to the list of
options within VIDEO Setup. To exit VIDEO Setup, use the
DOWNꢁ arrow to navigate to the bottom of the list
making SETUP menu visible. To exit VIDEO Setup, press the
LEFTꢂarrow to navigate back to the top icon setup menu.
VIDEO SETUP OPTIONS:
...........................................................................................................................................................................
Sharpness
Use this to set the sharpness of the video output. Choose from one of the following options:
• Sharp – Enable edge enhancement. Video details look sharper but this setting may cause
slight white line etching around objects.
• Soft – Soften edges. Video appears to be smoother but may cause slight loss of details.
• Off (default) – Turn off edge enhancement completely. This may be the most natural
setting for a high performance video system.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
Brightness (Default: 00)
Use this to adjust the brightness (black level) of the video output.
• Press the SELECT button to show the Brightness scale, and then use the LEFT/RIGHT
ARROW buttons to adjust the brightness.
• Press the SELECT button to confirm the new setting.
...........................................................................................................................................................................
Contrast (Default: 00)
Use this to adjust the contrast (white level) of the video output.
...........................................................................................................................................................................
Hue (Default: 00)
Use this to adjust the hue (tint) of the video output.
...........................................................................................................................................................................
Saturation (Default: 00)
Use this to adjust the saturation (color intensity level) of the video output.
...........................................................................................................................................................................
Gamma (Default: 00)
Use this to adjust the Gamma (intensity distribution to video signal level) of the video output.
The available settings are High, Medium, Low and Off.
...........................................................................................................................................................................
Color Space
Use this to select the color space for the HDMI output. The available options are:
• Auto – Allows the DVD player to automatically select the best color space based on
capability information collected from the TV display. This is the preferred setting.
• YCbCr 4:4:4 – Forces YCbCr 4:4:4 color space. If you select this option please make sure
that your TV is configured to accept YCbCr 4:4:4 signals, otherwise the video color will be
incorrect.
• RGB (default) – Forces RGB color space. If you select this option please make sure that
your TV is configured to accept RGB signals, otherwise the video color will be incorrect.
Older video displays will need the Color Space setting to be set manually.
PREFERENCE SETUP
Choose PREFERENCE Setup and press ENTER. Use the UPꢀ,
DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to navigate
the options within PREFERENCE Setup. When making changes,
navigate to the desired selection and press ENTER. Press the
LEFTꢂarrow to return to the list of options within PREFERENCE
Setup. To exit PREFERENCE Setup, press the LEFTꢂarrow to
navigate back to the top icon setup menu.
The Preference Menu can only be accessed when playback is
completely stopped, or when there is no disc in the DVD player.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
PREFERENCE SETUP OPTIONS:
...........................................................................................................................................................................
TV TYPE
Use this to set the output video system (PAL/NTSC) to match the type of TV. The options are:
• Auto – No system conversion is performed. The output video system is the same as that
encoded on the disc. Requires that you’re TV that supports multi-systems.
• PAL – When playing PAL-encoded discs, no system conversion is performed. NTSC
encoded contents are converted to PAL output.
• NTSC (default) – When playing NTSC-encoded discs, no system conversion is performed.
PAL encoded contents are converted to NTSC output.
...........................................................................................................................................................................
PBC - Play Back Control
Use this to enable/disable the play back control by disc contents. The options are:
• On (default) – If the disc contains Play Back Control, follow the disc instructions.
• Off – Play back the contents by sequence.
...........................................................................................................................................................................
AUDIO
Use this to set the preferred audio language of the sound output from the speakers.
ENGLISH (default) - Select if you want the sound in English.
FRENCH - Select if you want the sound in French.
SPANISH - Select if you want the sound in Spanish.
GERMAN - Select if you want the sound in German.
JAPANESE - Select if you want the sound in Japanese.
OTHERS - Use the numbers to input a language selection.
(Some disks require these settings to be made in their own SETUP menu.)
...........................................................................................................................................................................
SUBTITLE
Use this to set the preferred subtitle language of the subtitles displayed on the TV. If a subtitle of
the selected language is available, it will be displayed. When “Auto” is selected, the subtitle
display is decided by the disc.
ENGLISH - Select if you want the subtitles in English.
FRENCH - Select if you want the subtitles in French.
SPANISH - Select if you want the subtitles in Spanish.
GERMAN - Select if you want the subtitles in German.
JAPANESE - Select if you want the subtitles in Japanese.
OTHERS - Use the numbers to input a language selection.
OFF (default) – Select if you do not want to display the subtitles.
(Some disks require these settings to be made in their own SETUP menu.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
...........................................................................................................................................................................
DISC MENU
Use this to set the language of the menus recorded on the disc (top menu, etc.)
ENGLISH (default) - Select if you want the menus in English.
FRENCH - Select if you want the menus in French.
SPANISH - Select if you want the menus in Spanish.
GERMAN - Select if you want the menus in German.
JAPANESE - Select if you want the menus in Japanese.
OTHERS - Use the numbers to input a language selection.
(Some disks require these settings to be made in their own SETUP menu.)
...........................................................................................................................................................................
PARENTAL CONTROL
Use this to set parental control ratings in order to prevent minors from watching inappropriate
contents. This function requires that the disc being properly rated and encoded.
• Press the SELECT button to bring up the rating selection menu.
• Press the UP/DOWN arrow buttons to select the appropriate rating. The selected rating and
all ratings below will be allowed. Any rating above the selected rating will be blocked.
• Press the SELECT button to confirm the selection. You will be asked for the parental control
password. Enter the password (Default password: 7890) and press the SELECT button.
Use the Parental Disc Setting to restrict playback of certain DVDs for certain audiences. The
levels of restriction, which are similar to rating codes used in movie theaters, are listed below:
• 1 (KID)
• 2 (G)
• 3 (PG)
• 4 (PG-13)
• 5 (PGR)
• 6 (R)
• 7 (NC-17)
• 8 (ADULT)
• OFF (default)
Note: Even with adult DVDs, viewing cannot be restricted unless the restriction level
is recorded on the disc. It is however possible to disable playback of all DVDs.
Movie Rating Guidelines
NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA rating system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released. NR Programming may contain all types
of programming including children’s programming, foreign programs, or adult material.
G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audience of any age.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DEFAULT SETTINGS
PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating
may include more explicit sexual, language, and violence content than movies rated PG.
R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
NC-17 – No One Under 17
These movies contain content which most parents feel is inappropriate for their children
under 17 to view. Content can consist of strong language, nudity, violence, and suggestive
or explicit subject matter.
ADULT – No One under 18
These movies contain inappropriate material for anyone under 18.
...........................................................................................................................................................................
PASSWORD
Use this to set parental control password. To change the password, enter the old password
(Default: 7890) and then enter a 4-digit number as the new password. Enter the new password
again to confirm, and then press the SELECT button.
...........................................................................................................................................................................
DEFAULT
Use this to reset all settings to the factory default. The parental control password will not be
reset.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
STARTING A DISC
1. Turn on the Power.
• Press the power button, the power turns ON and the standby indicator lights turns
OFF.
• When in standby mode, press the POWER button on remote control unit to turn the
player ON.
2. Press the OPEN button to open the disc tray.
3. Place the disc in the disc tray.
4. Press the OPEN button a second time to close the disc tray.
• For many interactive DVDs and video CDs with playback control, a menu screen
appears. In this case use the procedure in Step F to select the desired item.
• Interactive DVDs are DVDs that include multiple camera angles, alternate endings for
stories, and other extras.
5. Press the PLAY button.
6. Use the UPꢀ, DOWNꢁ, LEFTꢂ, and RIGHTꢃcursor buttons to select the desired
item.
• For some discs there is a second menu screen. If so, press the ꢄ button to display
the next menu screen. (See the disc's jacket for availability)
• The cursor buttons (ꢀ,ꢁ, ꢂ and ꢃ) do not work for video CDs. Instead, use the
number buttons to select the desired item.
7. Press the ENTER button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the MENU/TITLE button while the DVD
is playing, though this depends on the disc.
• Press the PLAY button during playback of a video CD to return to the menu screen.
STOPPING PLAYBACK
1. During playback, press the STOP button on the main unit or the remote control unit.
Playback will stop and the wallpaper is displayed.
2. Resume play memory function. (DVD only)
3. With the DVD 8, when the STOP button is pressed, that position is stored in the memory.
At that time, "PLAY" flashes on the display. When the PLAY button is pressed, playback
resumes from the position where it was stopped. The resume play memory function is
cancelled if the disc tray is opened or the STOP button is pressed a second time.
4. If you do not want to continue playing the disc or to save electricity press the POWER
button on the main unit to turn the power off or press the POWER button on the remote
control to set the power to the standby mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
PAUSING PLAYBACK
During playback, press the PAUSE button on the remote control to pause playback. Press the
PAUSE button a second time or press the PLAY button to resume normal playback.
FORWARD/REVERSE SEARCHING
During playback, press one of the REW/FF buttons on the remote control unit.
ꢅ : Reverse direction
ꢆ : Forward direction
When pressed again, the search speed increases (in four steps). Increases are variable in 4 steps
for CDs, 4 steps for DVD video (movie part), DVD video and video CD discs. Press the PLAY
button to resume normal playback.
Note: In some cases the menu screen may reappear when one of the REW/FF buttons is
pressed during menu playback on a video CD.
SKIPPING TO THE BEGINNING OF CHAPTERS OR TRACKS
Cueing using the SKIP button
During playback, press one of the skip buttons on the main unit or the remote control unit.
ꢇ : Reverse direction (PREVIOUS)
ꢄ : Forward direction (NEXT)
A track/chapter is skipped each time the SKIP button is pressed. When the REVERSE skip button
is pressed once, the pickup returns to the beginning of the currently playing chapter/track.
Cueing Using the Number Buttons
Press the number of the track you want to select. For tracks high than 10, press 10+ and then
the appropriate extra number that adds up to the desired selection. For example, if you would
like to select track 15, press 10+ and then 5.
Note: Some DVD video and video CD discs do not operate as described in this manual
due to the intentions of the discs' producers.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE AND CARE
CARE AND CLEANING
The cabinet housing and front panel of the DVD 8 may be cleaned with a soft cloth and Windex
or a window cleaner. The frequency of cleaning will be governed by how many hours the DVD 8
is operated and by the cleanliness of the operating environment.
FACTORY SERVICE
Careful consideration has been given to the design of your DVD 8 player to keep maintenance
problems to a minimum. Any problems or requests for service should be referred to our
Customer Service Department at 919-355-0010. DO NOT return the DVD 8 to the factory without
a Return Authorization number (RA) from the Customer Service Department.
Cary Audio Design will assume no responsibility if the shipping company refuses to pay for
damage due to your improper packing or lack of insurance should the unit be lost or damaged in
shipment. Please retain and always use the original shipping carton for shipping the player.
NON-WARRANTY REPAIRS
Cary Audio Design will provide repair service for its products charging on a time and expense
basis. The standard non warranty service bench fee is $125, plus charges for parts and materials.
This may change and is not a quote for service. Please call us at 919-355-0010 for more
information about out of warranty service and repair fees.
CAUTION - Never remove or insert the back panel AC plug when the unit is on or the
ac cord is plugged into the wall.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
UNITED STATES LIMITED WARRANTY
Cary Audio Design warrants to the original United States purchaser for use in the United States that Cary
Audio Design vacuum tube or solid state power amplifiers, surround sound processors or preamplifiers shall
be free from defects in parts or workmanship for three (3) years from the date of the original purchase.
Vacuum tubes, if any are used in the component, are offered a 90 day from purchase date exchange policy
against defects with the exception of the CAVT 300B vacuum tube which has a (1) one year from purchase
date exchange policy. Any digital drive design, whether a Cary Audio Design CD or SACD player or a Cary
Cinema DVD player, has a limited one year parts and labor warranty against defects in manufacture. This is
a limited warrant, for the original purchaser only and does not transfer to any subsequent owner.
During the limited warranty period, Cary Audio Design or an authorized Cary Audio Design service facility
will provide free of charge both parts and labor necessary to correct any defects in material or
workmanship.
To obtain such warranty service, the original purchaser must:
1. Complete and send in the warranty Registration Card within 15 days of purchase.
2. If claiming service the owner must send a fully filled in copy of the original sales receipt along with
any unit sent in for service showing the AUTHORIZED CARY AUDIO DESIGN DEALER’S name, the
new selling price, the buyer’s name, e-mail or phone number and address on the receipt. Blank
receipts will NOT validate the limited warranty for service.
3. Notify Cary Audio Design as soon as possible after the discovery of a possible defect and submit
the following information to determine eligibility for warranty:
(a) The model number and serial number;
(b) A fully filled in copy of the original sales receipt showing the original selling price, purchasers
name and address filled in by an AUTHORIZED CARY AUDIO DESIGN DEALER with the original
date of purchase shown on the form;
(c) a detailed description of the problem.
4. Deliver the product to Cary Audio Design or the nearest authorized service facility or ship with all
freight and insurance charges prepaid, in its original packing container or equivalent, to Cary
Audio.
Correct maintenance, repair and use are important to obtain performance from this product. Therefore,
please carefully read the Operating Manual. This warranty does not apply to any defect that Cary Audio
Design in its sole discretion determines is due to:
1. Improper maintenance or repair, including the installation of parts or accessories that do not
conform to the quality and the specifications of the original parts.
2. Misuse, abuse, neglect or improper installation.
3. Accidental or incidental damage.
WARRANTY DISCLAIMER
Except for the express warranties stated herein, Cary Audio Design disclaims all other warranties including,
without limitation, all implied warranties of merchantability and fitness for a particular purpose. The
foregoing constitutes Cary Audio Design’s entire obligation with respect to this product, and the original
purchaser and any user or owner shall have no other claim for incidental or consequential damages. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation and exclusion may not apply to you. This warranty gives legal rights and you may also have other
rights, which vary from state to state.
EXCLUSIVE REMEDY
Notwithstanding the foregoing, the purchaser’s exclusive remedy for any breach of warranty, express or
implied, is limited to the repair or replacement of the defective unit or the refund of the purchase price, at
the option of Cary Audio Design. Under no circumstances is Cary Audio Design liable for incidental or
consequential damages. Any implied warranties imposed by law terminate one (1) year from the date of
purchase.
INTERNATIONAL PURCHASERS (Export markets)
Cary Audio Design warrants its merchandise to purchasers within the United States exclusively for use within
the United States of America. It provides no other warranties, expressed or implied. If you are living
outside the USA, please consult with your local dealer or distributor to determine the details of your local
warranty.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CARY AUDIO DESIGN
1020 Goodworth Drive, Apex, NC 27539
phone 919-355-0010
fax 919-355-0013
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Download from Www.Somanuals.com. All Manuals Search And Download.
|