Cary Audio Design CD Player CD 200 User Manual

CD 306/200  
CD Transport/Processor  
192kHz/24bit D/A Converter  
OPERATING MANUAL  
NOTE:  
Before installing your new CD-306/200 CD Transport/Processor, please read this manual  
carefully, as it will inform you of the specifications, sample rate conversion, proper  
installation and operation procedures. Also included in this manual are guidelines on how to  
properly care for your new player. Thank you for buying a Cary Audio Design CD-306/200  
Transport/Processor!  
®
®
, HDCD , High Definition Compatible Digital and Pacific Microsonicsare either registered  
trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries.  
HDCD system manufactured under license from Pacific Microsonics, Inc.  
This product is covered by one or more of the following:  
Country  
Patent No.  
United States  
5,479,168 5,638,074 5,640,161 5,808,574  
5,838,274 5,854,600 5,864,311 5,872,531  
669114  
Australia  
Other patents pending.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-306/200  
CD Transport /Processor  
CD 306/200 192kHz / 24Bit HDCD PLAYER  
HDCD  
CD  
AES/EBU  
STOP  
COAXIAL  
PREV.  
TOSLINK  
NEXT  
DIGITAL  
96kHz / 24Bit  
SAMPLE-RATE CONVERTER  
ANALOG  
192kHz / 24Bit  
POWER  
OPEN/CLOSE  
PLAY  
DIGITAL INPUT  
TOSLINK  
AES/EBU  
HDCD  
,
High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or  
AC POWER  
trademarks of Pacific Microsonics, Inc. in the United States and /or other countries  
.
HDCD system manufactured under license from Pacific Microsonics, Inc.  
COAXIAL  
This product is covered by one or more of the following  
Country  
United States  
Australia  
:
Patent No.  
5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531  
669114  
CARY AUDIO DESIGN, INC.,  
CD 306/200 HDCD PLAYER  
MADE IN CARY, NC, U.S.A.  
Other patents pending.  
Complies with FDA radiation  
performance standards,  
21CFR Subchapter J  
AES/EBU  
AES/EBU  
AES/EBU  
TOSLINK  
RIGHT  
LEFT  
COAXIAL  
This device complies with part  
15 of the FCC Rules.Operation  
is subject to the following two  
conditions:(1) This device may  
not cause harmful interference,  
and (2) this device must accept  
any interference received,  
ANALOG OUTPUT  
DIGITAL OUTPUT  
including interference that may  
cause undesired operation.  
Specifications  
P.2  
P.3  
Installation  
Operation  
P.4-8  
P.9  
Service and Care  
Warranty  
P.10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
This section describes the unpacking and installation procedures for the CD-306/200 CD.  
WARNING  
MAKE NO ATTEMPT TO PUT THE CD 306/200 PLAYER IN SERVICE WITH  
THE TOP COVER REMOVED. CONTACT WITH HIGH VOLTAGE INSIDE THE  
CD-306/200 PLAYER CAN BE FATAL !!!!!  
2.1 Unpacking  
All shipping containers have been specifically designed to protect their contents and special care  
has been taken to prevent damage under normal shipping conditions.  
Mishandling should be evident upon inspection of the shipping container. If CD-306/200 player  
mechanism or other damage is found after unpacking and visual inspection, take care not to  
destroy the evidence so that the shipping agent may inspect the damage. If necessary, document  
the damage with photographs and contact the shipping company immediately.  
Carefully remove your CD-306/200 CD Transport/Processor from its packing carton and  
examine it closely for signs of shipping damage. It is recommended to save all original packing  
cartons to protect your CD-306/200 from damage should you wish to store it or ship it for  
after-sales service.  
2.2 Placement  
In general, the location of your new CD-306/200 is not critical. However, certain precautions  
must be taken to ensure optimum performance. Avoid extremely hot locations such as near  
radiators or other heating units. Keep the top of the CD-306/200 clear of books, paper or other  
equipment to protect against overheating!! DO NOT place your CD-306/200 in a completely  
closed-in bookcase, as overheating will damage the CD Player! Do not stack the CD-306/200 on  
top of a power amplifier. Allow 8 to 10 inches above the unit for proper ventilation.  
2.3 Power Requirement  
The CD-306/200CD Transport/Processor is designed to operate from AC mains current. The  
design voltage is either 100-120V /or 200-240Volts AC, 50-60 Hz.  
2.4 Connections  
Digital Outputs : The outputs send a digital signal and should only be connected to the  
appropriate digital signal input of an accompanying component.  
Analog Outputs :These are for connection to the CD or AUX input jacks of an accompanying  
preamplifier.  
Digital Inputs: These are for connection to the CD, CD-R, DAT, MD,MP-3 and DVD player’s  
digital output jack.  
P.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Signal output connection is made via the output jacks on the rear panel of the CD-306/200. The  
analog or digital output interconnect cables should go to the input connections on the  
accompanying preamplifier or Digital to Analog processor. The choice of high quality  
interconnect cable is important and we recommend them highly. Your audio dealer will have the  
proper cables in stock for this purpose.  
3.1 Operation  
Your new CD-306/200 CD Transport/Processor is ready for operation after interconnect cables  
have been installed.  
3.2 Power On and Stand-By Mode  
When your CD-306/200 is connected to the power supply, the unit will switch to the Stand-By  
mode automatically. This is a convenient feature for users to turn the power on with the remote  
control.  
3.3  
Front of player  
POWER BUTTON: switches the power ON and OFF.  
DIGITAL SAMPLE-RATE COVERTER BUTTON: by selecting “on” the output data is 96kHz/  
24bit. Selecting “off” the output data is  
44kHz/16bit or matching input data-rate.  
ANALOG SAMPLE-RATE COVERTER BUTTON: For selection of internal D/A sample rate.  
The output data of the “ON” setting is  
192kHz/24bit and the data rate of the  
“OFF” setting is matching the input data.  
REMOTE SENSOR: Receives the signals from the remote control.  
DISPLAY: Gives information on the functioning of the player.  
PLAY BUTTON: Starting play. Interrupting. Resuming play  
STOP BUTTON: Stopping play.  
PREV. and NEXT BUTTON: Selecting another track during play.  
Selecting a track to start play with.  
OPEN / CLOSE BUTTON: Opening and closing the CD compartment. The compartment also  
closes when the front is pressed briefly.  
CD BUTTON, AES/EBU BUTTON, COAXIAL BUTTON, TOSLINK BUTTON:  
This switches the digital input selections.  
P.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 Remote Control  
U
D
Switching the Remote Control function.  
U : function of the switch.  
D : function of the word beside the switch.  
U
D
I
Switching the power on and off.  
I
1
DIGIT KEYS - Selecting another track during play.  
- Selecting a track to start play with.  
1
4
7
3
6
9
2
5
8
- Selecting tracks when compiling a programming.  
CLR  
Clears the last track number during programming.  
Opening and closing the CD compartment.  
Repeating play.  
+10  
CLR  
0
DELETE  
Muting sound. Resuming sound.  
Fast search fora passage.  
PROG  
TIME  
TOSLINK  
COAXIAL  
Selecting another track during play.  
Selecting a track to start play with.  
Selecting tracks whencompiling a program.  
AES/EBU  
ANALOG  
CD  
DIGITAL  
Starting play. Playing a program.  
Stopping play.  
192kHz/24Bit  
96kHz/24Bit  
SAMPLE-RATE CONVERTER  
Interrupting play. Resuming play.  
PROG  
Presets tracks to be played by keying in track nos.  
DELETE  
COAXIAL TOSLINK CD AES/EBU  
Clears a program.  
Digital input selecting.  
Digital sample output select.  
DIGITAL  
ANALOG  
TIME  
Internal D/A sample rate selection.  
Displays the remaining time of a track or it displays  
the total remaining time of a disc.  
CD-3006/200 RREMOTEE LLAYOUT  
P.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.5 LED Indicators  
POWER LED  
LED above the power button illuminates when the player is switched off (stand-by mode).  
HDCD LED  
LED above the HDCD logo illuminates automatically when HDCD signal is detected from a  
disc.  
CD, AES/EBU, COAXIAL, TOSLINK LED  
LED above the button illuminates when the digital input function is “ on ” .  
3.6 Display  
PROGRAM :  
Lights up when a program is being played.  
Blinks when compiling a program.  
TRACK: Indicates  
- What track is being played;  
- The total number of tracks on the CD or in a program.  
TRACK TIME:  
Indicates the elapsed playing time of the track being played.  
REMAINING TIME:  
Indicates the remaining time of the CD or a track being played. A ‘ - ’ sign is shown in front  
the time.  
REPEAT:  
Lights up when you repeat a CD or program. Selection of repeating ‘One’ or ‘All’ is possible by  
pressing the ‘REPEAT’ button on the remote.  
DISPLAY MESSAGES:  
NO DISC  
OPEN  
CLOSE  
AES 00:00  
COA 00:00  
TOS 00:00  
Lights up when there is no CD in the CD compartment  
Lights up when opening the CD compartment.  
Lights up when closing the CD compartment.  
Lights up when AES/EBU digital signal is input.  
Light up when COAXIAL digital signal is input.  
Light up when TOSLINK digital signal is input.  
P.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.7 Normal Playback  
on the remote.  
Open the CD Compartment by pressing OPEN/CLOSE.  
OPEN lights up.  
Insert an audio CD, printing side up and close the compartment.  
CLOSE lights up, the number of tracks and the playing time of the CD are shown on the  
display.  
-
-
-
-
-
Press POWER or  
-
-
Press the PLAY or on the remote to start play.  
The number indicator shows how many tracks are on the CD; when a track has been played  
its number disappears.  
-
-
-
-
-
-
The track being played blinks and its elapsed playing time is shown.  
Play will stop after the last track.  
Press POWER or  
on the remote to switch the player off.  
You can interrupt playback by pressing PLAY or  
You can restart play by pressing PLAY or or  
on the remote.  
on the remote.  
You can stop playback by pressing STOP, OPEN/CLOSE or on the remote.  
3.8 Selecting Another Track During Play (1-10)  
Key in the desired number  
The music stops and a moment later the selected track begins to play. You can also select the  
number by pressing ꢂ ꢃ (less than 0.5seconds).  
3.9 Searching For a Passage During Play (ꢄ ꢅon the remote)  
Press to search backwards to the beginning.  
Press to search forwards to the end.  
The searching speed is determined by how long a key is pressed:  
- The first 2 seconds fairly slowly, with sound;  
- Then at the maximum speed, with no sound.  
3.10 Starting with a Particular Track (1-0)  
- Key in the desired number  
- Play starts from the selected track automatically.  
You can also select the number by pressing ꢂ ꢃ (less than 0.5 seconds).  
P.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.11 Repeating Play (repeat)  
REPEATING A TRACK:  
-
-
-
-
Press REPEAT before or during playback.  
REPEAT ONE Lights up; the track will be repeated continuously.  
REPEAT ALL Lights up; the disc will be repeated continuously.  
Press REPEAT until the indicator goes off to stop the track being repeated.  
3.12 Programming  
-
Press PROGRAM once on the remote; PROGRAM indicator on the display will blink  
indicating the program mode is now entered.  
-
-
-
Key in track nos. in sequence to be played.  
Press either CLEAN or DELETE to edit input or cancel the program.  
When programming is completed, press PLAY or on the remote to start playing the  
programmed tracks.  
3.13 Break- In Period  
The micro-components, capacitors and output transformers take approximately 100 hours of  
music playing to fully settle in for peak performance. The CD-306/200 will seem OK sounding  
right out of the box. However, after the first couple of hours you will notice increased depth and  
tighter bass. This break-in period contradicts engineering theory, but is true with most HIGH  
PERFORMANCE audio components.  
WARNING  
MAKE SURE PLAYER IS UNPLUGGED FROM AC MAINS BEFORE  
SERVICING  
P.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE AND CARE  
4.1 CD-306/200 Care and Cleaning  
The housing and front of the CD-306/200 may be cleaned with a soft cloth and windex or a  
window cleaner. The frequency of cleaning will be governed by how many hours the  
CD-306/200 is operated and by operating environment cleanliness. Do not use benzene, harsh or  
abrasive chemicals to clean the front as they may remove or damage the labels.  
4.2 Factory Service  
Careful consideration has been given to the design of your CD-306/200 HDCD CD  
Transport/Processor to keep maintenance problems to a minimum. Any service problems  
should be referred to our Customer Service Department phone number (919) 481-4494. DO  
NOT return the CD-306/200 to the factory without a return authorization number (RMA) from  
the Customer Service Department.  
Cary Audio Design, Inc. will assume no responsibility if the shipping company refuses to pay  
a damage due to your improper packing or lack of insurance should the unit be lost or damaged  
in shipment. Please retain and always use the original shipping carton for the CD 306/200 in the  
event that you move or after service is needed.  
WARNINGS  
MAKE  
NO  
ATTEMPT  
TO  
PUT  
THE  
CD-306/200  
IN  
SERVICE WITH THE COVER REMOVED. CONTACT WITH  
POWER SUPPLY SECTION FOUND IN THE UNIT CAN BE  
FATAL!! COMPLETELY REMOVE AC POWER PLUG FROM  
THE WALL BEFORE SERVICING OF THE PLAYER.  
CAUTIONS  
NEVER REMOVE / INSERT PLUG WHEN UNIT IS ON OR  
THE AC POWER SWITCH IS IN THE ON POSISTION.  
!!PLEASE OBSERVE THE SAFETY DIRECTIONS IN THIS MANUAL!!  
P.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNITED STATES LIMITED WARRANTY  
Cary Audio Design, Inc. warrants to the original United States purchaser for use in the United States, that this  
product shall be free from defects in material (except tubes and AF output transistors) or workmanship for:  
Models CAD-211M, SLM-200 and the CAD-805, Five (5) years from date of original purchase.  
Amplifiers and Preamplifiers, Three (3) years from the date of the original purchase.  
Digital Products, One (1) year from original date of purchase.  
During the warranty period, Cary Audio Design, Inc. or an authorized Cary Audio Design, Inc. service facility will  
provide free of charge both parts (except tubes and AF output transistors) and labor necessary to correct defects in  
material or workmanship.  
To obtain such warranty service, the original purchaser must:  
(1)  
(2)  
Complete and send in the warranty Registration Card.  
Notify Cary Audio Design, Inc. as soon as possible after the discovery of a possible defect:  
(a) The model number and serial number;  
(b) The identity of the seller and the approximate date of purchase;  
(c) A detailed description of the problem, including details on the electrical  
connection in the associated equipment and the list of such equipment.  
Deliver the product to Cary Audio Design, Inc. or the nearest authorized service facility,  
or ship the same in its original container or equivalent, fully insured and the shipping charges prepaid.  
(3)  
Correct maintenance, repair and use are important to obtain optimum performance from this product. Therefore,  
carefully read the Operating Manual. This warranty does not apply to any defect that Cary Audio Design, Inc. in  
its sole discretion determines is due to:  
(1)  
Improper maintenance or repair, including the installation of parts or accessories that does not  
conform to the quality and the specifications of the original parts.  
Misuse, abuse, neglect or improper installation.  
(2)  
(3)  
Accidental or incidental damage.  
WARRANTY DISCLAIMER  
Except for the express warranties stated herein, Cary Audio Design, Inc. disclaims all other warranties including,  
without limitation, all implied warranties of merchantability and fitness for a particular purpose.  
EXCLUSIVE REMEDY  
Notwithstanding the foregoing, the purchaser’s exclusive remedy for any breach of warranty, express or implied,  
is limited to the repair or replacement of the defective unit or the refund of the purchase price, at the option of  
Cary Audio Design, Inc. Under no circumstances is Cary Audio Design, Inc. liable for incidental or consequential  
damages. Any implied warranties imposed by law terminate one (1) year from the date of purchase.  
FOREIGN PURCHASERS  
Cary Audio Design, Inc. warrants its merchandise to purchasers in the United States for use in the United States. It  
provides no other warranties. If you are a foreign purchaser, consult with your dealer to determine whether your  
dealer provides any warranty.  
The foregoing constitutes Cary Audio Design, Inc.’s entire obligation with respect to this product, and the original  
purchaser and any user or owner shall have no other claim for incidental or consequential damages. Some states  
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and  
exclusion may not apply to you.  
This warranty gives legal rights and you may have other rights which vary from state to state.  
P. 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C A R Y A U D I O D E S I G N INC.  
111-A WOODWINDS INDUSTRIAL COURT, CARY, N.C. 27511, U.S.A.  
TEL : (919) 481-4494 FAX : (919) 460-3828  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Boss Audio Systems Stereo System HP32 User Manual
Boston Acoustics Speaker PV700 User Manual
Bowflex Home Gym 31 Bench User Manual
Broan Ventilation Hood 629004 User Manual
Brother Label Maker PT 97OOPC User Manual
Cecilware Coffeemaker C 2003G IT User Manual
Chamberlain Mobility Aid LM21XP User Manual
Chauvet Scanner Q RollTM 250 User Manual
Chevrolet Automobile 2009 Tahoe User Manual
Chicago Electric Sewing Machine 90715 User Manual