Network
Video Recorder
/ /
VK-64 VK-16
VK-Lite
SetGuide
Ver. 2.0
ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
MPEG-4
NOTICE ABOUT THE MPEG-4 VISUAL STANDARD: THIS PRODUCT IS LICENSED UNDER THE
MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER TO (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING
THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND ADDITIONAL
LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
“This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding
MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a
personal and non-commercial purpose or (2) by a video provider licensed uthe AT&T patents to
provide MPEG-4 compliant video. No license is granted or implied for any other or MPEG-4 standard.”
Third Party’s Software
This product contains third party’s software modules. Ficense coplease refer to the
LICENSE folder on the supplied CD-ROM.
Software License
License Agrnt
Apache
Apache
FastCGI
Expat
Apache Softwse, Versi
Open Ma
MIT Lice
FastCGI
Expat
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
System Operation Overview . . . . . . . . . . . . . . . . . . . . . . . . . .6
Specification Comparison of VK-64/VK-16 and VK-Lite . . . . . . .8
System Configuration Examples . . . . . . . . . . . . . . . . . . . . . . .9
Before Starting Operation <Important> . . . . . . . . . . . . . . . . .11
Chapter 1 VK-64/VK-16 Installation
Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Chapter 2 VK-Lite Installatio
VK-Lite System Installatio. . . . . . . . . . . . . . .18
Step 1: Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Step 2: Camellation tup . . . . . . . . . . . . . . . . . . . . . . . .19
Step 3: Inst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Step 4: Stortion . . . . . . . . . . . . . . . . . . . . . . . . . . .21
SteCamen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Step 6: Recordifiguration . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Step 7: Viewer Settin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Step 8: Maement and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
This guide is intended for the following users.
• System administrators who install and manage VK-64/VK-16
• System administrators who install and manage VK-Lite
This guide first explains what you should know before operating a network camera
monitoring system, and differences between VK-64/VK-16 and VK-Lite.
“VK-64/VK-16 Installation” describes the process from preparation for installation to system
administration, and also provides references to each step’s detailed explanations in the
Administrator's Manual.
“VK-Lite Installation” describes the basic steps for preparation for ination and operation.
First, read this guide up to “Specification Comparison K-6K-16 and VK-Lite”.
And then, read “VK-64/VK-16 Installation” or “VK-Lite Instadepending on the
software you use.
Icons used in this guide
The following icons are used in tdescrs that you should read in particular.
Contains notes and o. Read e notes carefully.
Note
Cains supplementary eference information for the operation.
Tip
Shthe relevange in other manuals that explains more details. Read these as
Reference
nece.
It is recommended to read ”VK-Lite Installation” even when installing VK-64/VK-16, as an
example of simple configuration with 4 camera servers.
Note
5
Download from Www.Somanuals.com. All Manuals Search And Download.
System Operation Overview
Overview of VK-64/VK-16
Network Video Recorder
Network Video Recorder is software for viewing video, recording video and audio, and
playing video from multiple network cameras (hereafter referred to as camera servers).
VK-64/VK-16 and VK-Lite enable viewing and recording of JPEG and MPEG-4 video, two-way
audio communication, and audio recording.
Network Video Recorder Configuration
The Network Video Recorder consists of storage server software aviewer software.
You can record videos from multiple camera servers ann lovent information of
motion detection and external device input, using the storage sware. Also you can
view live videos from multiple camera servers, corded vsaved on storage
servers, using the viewer software.
Product Type
Product N
orage Server
Viewer
1 license
1 license
1 license
5 licenses
Network Video Recorder VK
Network VidRecor VK-
Network ViRecorder VK-64
Network VidRecorder VK-64 v2.0 wers
license
1 license
-
-
Network VidRecorVK-64
Up to 64 camera servers can be registered to Network Video Recorder VK-64 (hereafter
referred to as VK-64).
Network Video Recorder VK-16
Network Video Recorder VK-16 (hereafter referred to as VK-16) has the same core
functionalities as VK-64, but the maximum of number of camera servers, which can be
registered to, is 16.
Type
Storage Server
Viewer
VK-64
Up to 64 camera servers can be registered.
Same
Up to 16 camera servers can be registered.
All other functions are the same as VK-64.
VK-16
6
Download from Www.Somanuals.com. All Manuals Search And Download.
System Operation Overview
VK-64 Viewer (Viewer Only)
You need to purchase the required number of viewer licenses to use additional viewers.
Also, VK-64 Viewer is suitable for a monitoring system, in which you need just monitoring,
not recording. You can view live videos from and control up to 64 camera severs. (Some
functions are not available, such as recording and playing video, displaying event logs of
motion detection and external device input, and still frames.)
Upgrade from Older Versions
To upgrade from an older version (v1.1, v1.2, v1.3, or v1.4) to v2.0, download the free patch
installer from our website. License keys used for the older versioan also be used for
v2.0.
Network Video Recorder VK-Lite
Network Video Recorder VK-Lite supplied wa simplifiersion software of
VK-64/VK-16. VK-Lite allows displaying videvideo and o, and playing
audio, of up to 4 camera servers.
A VK-Lite Viewer license is giservehen using multiple camera servers,
you need to buy additional licdditioViewer License”) for each camera.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification Comparison of
VK-64/VK-16 and VK-Lite
VK-Lite is Network Video Recorder which is supplied with VB-C60. Although VK-Lite
basically provides the same functionalities as VK-64/VK-16, there are some functional
limitations as follows, since VK-Lite is a simplified version of VK-64/VK-16.
Main functional
Type
VK-64/VK-16 v2.0
VK-Lite v2.0
limitations
Max. number of camera
servers
64 / 16
4
Camera
server
connection
VB-C60, VB-C300
VB-C50 series,
VB-C10/R, VB-150
Available camera
servers
VB-C60, VB-C300
VB-C50 series
Automatic camera
server search
✓
✓
Recording format
Max. recording frame rate
JPEG, MPEG-4
JPEG only
5 fps
1
30 fps*
Normal Schedule recording
(Continuoung,
Sensor g,
Motion g)
Special Ding
Man
Schedule recording
(nuous recording)
al recording
Video recording mode
Av
024MBours
ixed
1GB/day (1024MB)
Max. file size setting
Max. retained hist
recorded video
Audio cording /
pac
9 wee
12 weeks (90 days)
Storage
Server
✓
✓
✓
cording to NAS ser
–
Following functions are
unavailable.
• Sending mail when an
event occurs
• Customizing priorities of
events
Otunctional
limit
–
• Connection via an HTTP
proxy
Live video format
Max. displaying frame rate
JPEG, MPEG-4
JPEG, MPEG-4
1
1
30 fps*
30 fps*
Max. number of video
windows on the viewer
1
Unlimited*
8 or less is recommended.
Two-way audio
Registration of multiple
storage servers*
Layout Sequences*
✓
✓
✓
✓
–
Viewer
2
3
–
Following function is
unavailable.
• Connection via HTTP proxy
Other functional
limitations
–
1
* Operational limits apply depending on the number of camera servers, the PC performance and hard disk
capacity, and the amount of network traffic.
2
* In case of using VK-64/VK-16 with multiple storage servers, you can unify management of camera servers
registered to each storage server and the recorded data, if you set one master storage server. When connecting
to each storage server using VK-Lite viewer, you need to switch connection one by one.
* Layout Sequences is a function to switch displayed viewer windows at set intervals.
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
Examples
A combination of storage servers and viewers enables various types of system
configurations, such as a simple system with one PC and one camera server, or a
system using multiple PCs and camera servers.
Viewing and Recording on a Single PC
You can configure a system with one PC as both a storage server and a viewer.
Network
Stora
Records
Viewer
Displays live virecorded video
Recording with ervend Viewing on One Viewer
You cure a C as a storage server and another PC as
a ver.
Thinfiguration is recomfor a system with multiple camera servers.
Storage Server
Records video
Network
Viewer
Displays live video and recorded video
9
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration Examples
Using Multiple Storage Servers and Multiple Viewers
Up to 10 storage servers can be used on a single network. When multiple camera
servers are used in a system, you can use one of them as a master storage server,
and use the others as slave storage servers. Master storage servers are storage
servers, which viewers first connect to, and are used to store information of camera
servers registered to each storage server and to store event logs. Although there
is no limit on the number of viewers to be connected, up to 10 clients can connect
to a single server. In all, up to 192 camera servers can be operated in one system.
You can operate a system with a combination of storage servers and VK-64, VK-16
or VK-Lite.
Slave orage Server
Stores information of
camera servers
egistered to each
orage server and
nt logs
Masterage Server
Slave Storage Server
Viewer
Viewer
The master storage server function is not available with VK-Lite. When operating
multiple storage servers with a VK-Lite viewer, you need to switch the connection
one by one.
Note
Using Viewer Only
You can also use the viewer only.
Network
Displays live video
Viewer
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Starting Operation
<Important>
Please be sure to perform operational tests in the actual environment before starting
operation.
Be aware of the following points prior to operation.
● Video recording and live viewing may not be done as your settings, depending on
the network environment and the PC’s performance.
● Under a heavy load on the CPU or disk of the PC, the recording may not be done at the
specified frame rate, recording may be suspended temporarily, or you may receive slow
responses to the viewer operation. Also, when the amount of free disk space becomes
low, recording may be suspended temporarily, because the disk load increases due
to deleting process of recorded video files.
● Operation and performance of storage servers and viewers me affected on PCs,
where anti-virus software or firewall software is running.
● When using a proxy server, video recording me done apecified frame rate,
or live viewing may become interrupted. Aation betwa storage server
and viewer may be interrupted. In those canot be recod.
/ Details odminisor's Manual (P.57, P.79)
Reference
● Please be re to read the nce page for notes on each version of
Windows O
“Notes perating Environment” in Administrator's Manual (P.24~27)
Reference
● When using a NAS server, take note of the following points.
• Use recommended NAS servers with Windows Storage Server 2003 or Windows Storage Server 2003
R2.
• To record video to a NAS server, it is recommended that the network for communicating with a camera
server be separated from the network for communication with the NAS server.
● Notes on audio functions
Audio functions are available on VB-C60, VB-C300, VB-C50i, VB-C50iR, VB-C50FSi.
• Audio can be sent and received using VK Viewer.
• Audio recording is available. However, it is not possible to record audio without video. Video and audio
must be recorded together.
• Video and audio may be asynchronous.
• Audio data may be interrupted depending on the PC’s performance and the network environment.
• Audio data may be interrupted on the PC, where antivirus software is running.
• Audio functions cannot be used via a proxy server.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
1
VKK-6 Installation
Setup Procedure
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Procedure
This chapter describes the installation process from preparation to maintenance.
Refer to Administrator's Manual for detailed explanations of each step.
“System Design Concept”
Step
Preparation
1
Before installation, check the free space of the hard drive
required for a storage server, considering the video retention
period and recording conditions, and then prepare necessary
equipments.
Camera’s user’s manual
Step
Camera Installation and Sup
2
Set up a camera. Refer to the camera’s use
details on how to connect the camera.
“Chapter 2 Installation”
Step
Itallation
3
Install the VK-6-16 storserver software and viewer
software onto the Pge server and the PC for viewer.
“Chapter 3 Storage Server Configuration Reference”
Step
Storage Server Configuration
4
Maximum retained history
Event notification
User privileges
Configure the storage server settings. You can configure
settings for recording such as the maximum retained history
and maximum file size, settings for event notification, and
settings for user privileges, etc.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Procedure
“Chapter 4 Register Camera Server
and Set Recording Schedule”
Step
Camera Server Registration
5
Location
When registering a camera, first set the camera’s the location and
zone to make it easier to categorize registered cameras. If we look at
an example of a retailer with multiple branches and stores, the
branches and stores correspond to locations. The sub-classification,
such as entrances, cash desks, parking lots, of each store correspond
to zones. Register camera servers after setting locations and zones.
Tokyo branch
1
Zones
Sales
Cash desk
Parking lot
“er 4 Register Camera Server
nd Set Recording Schedule”
Step
Recording Schedule Configion
6
Recording schedule settings are available for
server, such as continuous recording, motio
recording, sensor event recorrding
include normal schedule and eduleyou
can configure detailed setting
“Chapter 5 Viewer Reference”
Step
Vwer Settings
7
Layout design and registration
Viewing frame rate
Rate upper limit
You can customize monitorireen by designing and registering
layouts of the viewing areegister multiple layouts and switch them
at a fixed time interval, so it is possible to build large-scale monitoring
systems. You can also set an upper limit on the viewing frame rate and
configure automatic adjustment settings, as well as configure settings for
event notifications to operators and audio alert depending on the priority level.
Automatic adjustment settings
“Chapter 6 Operation and Management”
“Chapter 7 Backup Scheme”
Step
“Chapter 8 System Maintenance”
Management and Maintenance
8
Network failure caused by unforeseen problems may negatively
affect on the surveillance system operation. In order to avoid, it is
recommended to carry out maintenance, such as periodical back
up of recorded data and settings data.
Recorded video data
Event data
Settings files
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
2
K-Le Installation
System Installation Example
Download from Www.Somanuals.com. All Manuals Search And Download.
VK-Lite System
Installation Example
This chapter explains the process from installation to the operational management with an
example of a VK-Lite surveillance system based on the following recording conditions.
Recording Conditions
Number of camera servers
Video size
4
VGA (640 x 480)
1
Video quality
Standard (Video data size approx. 50KB* )
Recording frame rate
Video retention period
1 fps
14 days
1
* May vary depending on the camera.
System Configuration Example
The example below shows a systewhere a er and a viewshare a single
PC connecting with 4 camera
Network
This installation example is explained on the assumption that all the preparation
have already been completed, including settings for network cameras, and
installation, setup and wiring of related equipments.
Note
18
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Step 1: Preparation
Calculate how much free hard disk space will be required for the storage server from the
recording conditions to ensure that the system can operate stably.
The amount of hard disk space required can be calculated using the following formula.
2
Required free hard disk space
= No. of cameras x Video data size x Recording frame rate x Video retention period
(sec.)
= 4 x 50 x 1 x (60 x 60 x 24 x 14)
~
~
291000000 B
300 GB
~
~
The amount of free hard disk space required er 300 GBwever, this value
does not include the space required in the sys
Do not use ave to recorded video data. The video may not
be recorded may orrupted.
Note
/ “System Design Cin Administrator's Manual (P.28)
Refere
Step 2: Camera Server Installation and Setup
Configure initial camera server settings, such as the IP address setting.
Refer to Start Guide for details of initial camera server settings.
When you use presets and preset tours, it is recommended to complete
camera server settings in advance, so that you can build the system more
efficiently.
Tip
Initial camera settings / Start Guide
Preset settings / “Preset Setting Tool” in Operation Guide (P.2-18)
Reference
19
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Step 3: Installation
Install the VK-Lite storage server software on the PC for storage server and the VK-Lite
viewer software on the PC for viewer, using the CD-ROM supplied with the network
camera.
In the following example, VK-Lite storage server and VK-Lite viewer are installed on a
single PC.
Before Installation
The installation drive and the drive for storing recorded video uld be formatted in
NTFS.
Installation
Double-click VKLiteInstall.exe in the Von the VB0 Setup CD-ROM
to start the installation.
1
Click Next.
2
The Software License en aars. Read the agreement carefully,
and then select the radicept terms in the license agreement
and click ontinu
The License y entry screen does not appear in VK-Lite installation process.
Tip
Both of the folloapplications are displayed.
3
• Viewer
• Storage Server
When you need to install either one of the above, right-click on the application icon,
which you will not install, and choose “This feature will not be available”.
Click Next.
4
A screen for starting the installation is displayed.
● It is recommended that you do not change the installation directory.
● You can change the installation directory by clicking Change.
Tip
20
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Click Install.
5
6
The installation process begins and the progress bar is displayed.
Once the installation has finished, the InstallShield Wizard Completed screen is displayed.
Click Finish.
Now the installation has completed.
2
If you are running a system with multiple PCs, you need to install the software on
each of the PCs.
Tip
/ “Chapter 2 Installation” in Administrator's M
Reference
Step 4: StoServfiguration
Start up “VK-Lite Storage Servor stoe server settings.
In the following exawe will ings, sas the maximum retained history,
low disk space rning vel, mausage, and user management setting. How
to set recordichedule is explaiRecording Schedule Configuration”.
Double-click the VK-Lite Storage Server
Configuration v2.0 icon on the Desktop.
1
The Login dialog box is displayed.
Enter your user name and password, and click
Login.
2
The Storage Server Configuration dialog box
is displayed.
● You need to log on to Windows as a Windows Administrator to configure storage
server settings.
Tip
● After installation, the following VK-Lite user with administrator privileges is created.
User Name
Password
admin
NVR
● If User Account Control is enabled on Windows Vista, the User Account Control
dialog box will be displayed. In this case, click Allow.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SystemInstallation Example
Configure the basic storage server settings.
3
In this example, we use the conditions shown in
“VK-Lite System Installation Example” and the
hard disk space calculated in “Step 1:
Preparation”. You should use values calculated
for your actual operating conditions.
• Set the Maximum retained history to 14
days.
• Use the default value of 10% for the Low
disk space warning l(A value of 10% or
more is recommende
• Set the Maximusace used to 300
GB
systeis to be used by multiple users,
need to add users using the User
nagement tab.
• To add a user, click Add and set the user
name and password.
• To assign administrative privileges to the
user, check the Administrator checkbox.
It is strongly recommended that before
operation, you change the user name
“admin” and password created after
installation.
Note
22
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
The following operations are available by the administrator only.
• Configuring, registering, and changing camera servers
• Configuring and changing recording schedules
Tip
Click Apply.
5
2
The changes are saved.
/ “Chapter 3 Storage Server Configuration Reference” in Administrator's
Manual
Reference
Step 5: Camera Sergistrat
Start up VK-Lite Viewer to register camera ser
When VK-Lite Viewer is run for te, no splayed in the viewer screen. To
display video in the viewer sa camserver and then arrange the video
window on the viewing area.
ble-cliche VK-Lite Viewer v2.0 icon on
Desktop.
e storage server connection menu (startup
screen) is displayed.
Select localhost from the Master Storage
Server pull-down menu, and click Connect.
2
The Login dialog box is displayed.
In this example, localhost is selected because a storage server and viewer are
installed and operate on the same PC.
For the master storage server, select one from the following, considering the
Tip
actual operating environment.
Operating Environment
Selection
The storage server and viewer are running on the same PC localhost
The storage server and viewer are running on different PCs Specify the IP address
Not record video but view live video
Storage Server not used
23
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Enter the “User Name” and “Password”, and
click Login.
3
4
The Viewer Screen is displayed.
Select View / Configuration from the menu.
The Configuration and Preferences screen is
displayed.
lick Locations/Zones tab to create
ations d zones.
● You can set location names to identify each monitoring site, for example
“Office Building”, “Store”, etc.
Tip
●
You can set zone names for particular places in each Location, such as
“Entrance”, “Elevator Lobby”, “Inside Store”, “Stock Room”, “Parking Lot”, etc.
● The following example shows a location name and zone names used for a small
retail (Only one Location is set, on the assumption that there is one branch only).
Location VB Store
Zone 1
Zone 2
Zone 3
Inside Store
Stock Room
Parking Lot
Click Find Camera Servers.
6
Camera servers that can be registered are displayed in the Search Results dialog
box.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Select a camera server to register, and then
click Add Camera Server.
7
The Add Camera Server dialog box is
displayed.
2
Configure the followisettings in the Add
Camera Server dialog .
8
• Enter the “Usmnd “Password”, and
theConnee sure that the live
ayed in theview window.
• amera Namand select the
“nd “Zone” of the camera.
Clicart Control, and adjust the viewing
ngle he camera.
Click O
9
Now, tcamera server hegistered. The registered camera server
informats displayed the right list of the screen.
Repeat step 9 to rster other camera servers, if necessary.
10
Check that all of the camera servers that you
11
are using have been registered successfully in
the right list of the screen.
Click Save Changes.
12
The registered camera information is saved.
/ “Chapter 4 Register Camera Server and Set Recording Schedule” in
Administrator's Manual
Reference
25
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Step 6: Recording Schedule Configuration
Configure the recording schedule settings after camera server registration.
You can configurate recording schedule settings using the Recording Schedules tab in the
Configuration and Preferences screen.
The following example shows a normal schedule for continuous recording at 1 fps
all day through Monday to Sunday.
Click the Recording Schedules tab in the Configuration and Preferences screen.
1
Drag to select the ire camera server
schedule area
2
The ASchedm dialog box is
diit is nisplayed, go to
Cmary tub. en, in the Edit
Caver dialog ox, choose
Storerver from the Storage
erveop-down menu.
gure the following settings.
lick All Day.
• Check the Monday to Sunday checkboxes.
• Select “1 fps” from the drop-down list for
recording frame rate.
Click OK.
4
The configured schedule is displayed in the
schedule area.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Check that the settings are correct and click
Save Schedule.
5
The schedule is saved.
2
You can only select “Normal Schedule” in VK-Lite. “Special Day Schedule”
cannot be selected.
Tip
/ “Chapter 4 Register Camera Server and Set Recordichedule” in
Administrator's Manual
Reference
Step 7: Viewgs
The following example shows hre the settings for viewer, create a layout,
and display video.
Basic Viewngs
You can conure basic viewer as the maximum frame rate, audio, still
images, etc.
In the followinample, juseck the maximum frame rate setting for live video, but not
change the valu
Click the Viewer Settings tab in the
Configuration and Preferences screen.
1
The default value of the maximum frame rate is
“5 fps”. You can select from the following frame
rates.
0.1, 0.2, 0.5, 1, 2, 5, 10, 15, 20, 25, 30
27
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Creating Layouts and Displaying Video
The final step in the system configuration process is to create layouts.
In the following example,
● Use grids to arrange video windows
Select View / Viewing Screen from the menu.
1
The Viewer is displayed. Video thumbnails of cameras registered in “Step 5: Camera
Server Registration” are displayed in the camera selection area at the top of the
viewer.
Right-click on Viewing a and select Layout
Grids / Alignent G
2
In a SelectiArea, drag a
thuthe grid in the ewing Area.
3
rag thdeo window to the position you want
isplaWhen you release the mouse, the
and pion are automatically adjusted to
h the layout frame.
To change the size of video
windows, click and drag any corner
of the window. When you release
the mouse, the size and position
are automatically adjusted to match
the layout frame.
Click
and
drag
other
5
thumbnails onto the Viewing
Area and resize the windows.
A layout example is shown to
the right.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation Example
Right-click on the Viewing Area and select
Save from the menu.
6
2
Now, the configuration process has been completed.
● The aforementioned example out examng “Default Shared
Layout” displayed by defa
Tip
You can create and save new ny name.
● Live video quality may be deifficult to view ending on the
video size fon set ora server. In those cases, the quality
may be imng tho size for transmission on the camera
server or eceiviize using the right-click menu of video
windows.
/ “Chapter 5 Viewee” in Administrator's Manual
Refere
Step 8: Management and Maintenance
It is recommended to regularly provide the operational management, including backing up
of recording and setting data, and system maintenance, while you are operating the
system.
This section explained the basic operations of some VK-Lite functionalities and
configuration examples for a network camera recording and monitoring system. For more
detailed information, refer to Administrator's Manual provided on the supplied CD-ROM.
/ “Chapter 6 Operation and Management”, “Chapter 7 Backup Scheme”, and
“Chapter 8 System Maintenance” in Administrator's Manual
Reference
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CANON INC.
CANON EUROPA N.V.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-
8501, Japan
Bovenkerkerweg 59-61, P.O. Box 2262, 1185 XB
Amstelveen, The Netherlands
CANON U.S.A.,INC.
CANON EUROPE LTD.
One Canon Plaza Lake Success, NY 11042-1198 USA
6
Roundwood Avenue, Stockley Park, Uxbridge
Middlesex, UB11 1JA, United Kingdom
● If you have any questions, call the Canon
U.S.A. Information Center toll-free at
1-800-828-4040 (U.S.A. only)
CANON COMMUNICATION & IMAGE FRANCE
12 Rue De L’lndustrie, 92414 Corbevoie, Cedex, Fance
CANON (UK) LTD.
CANON CANADA INC. NATIONAL HEADQUARTERS
Woodhatch, Reigate, Surrey RH2 8BF, United
6390 Dixie Road, Mississauga, Ontario L5T 1P7
Kingdom
CANON CANADA INC. CALGARY
CANON DEUTSCHLAND GmbH
2828, 16th Street, N.E, Calgary, Alberta T2E 7K7
Europark Fichtenhain A 10, 47807 Krefeld, Germany
CANON CANADA INC. MONTRÉAL
CANON ITALIA S.p.A.
8801 Trans Canada Hwy, St. Laurent Québec H4S 1Z6
Via Milano, 8 San Donase-20097 (MI), Italy
● If you have any questions, call the CANON
CANADA Customer Information Centre
toll-free at 1-800-OK-CANON (652-2666)
(Canada only)
CANON (Sc) A.G
Industriestrasse 0tlikon, Switzerland
LGIUM N.
1831 Diegeechelen), Belgium
CANON MEXICANA, S. DE R.L.DE C.V.
Boulevard Manuel Avila Camacho, No. 138 PB, Pisos
15, 16 y 17
11, A-1230 Wienstria
Col Lomas de Chapultepec C.P. 1100.
México
CSPAÑA,S.A.
AvdEuropa, 6 Alcobendas, 28108 Madrid, Spain
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenu#04-01, K
Singapore 098632
CANOENSKA AB
ustav IIBoulevard 26, 169 88 Solna, Sweden
ANON NORGE A/S
Hallagerbakken 110, P.O. Box 33, Holmlia, N-1201
Oslo, Norway
CANON HONGG CO., LTD.
19/F., The Metis Tower, 10 Metrop
Hunghom, KowloHong Kong
CANON OY
CANON AUSTRALTY.LTD.
1 Thomas Holt Drivrth Rydydney, N.S.W.
2113, Australia
Huopalahdentie 24, P.O. Box 1, FIN-00351 Helsinki,
Finland
CANON DANMARK A/S
Knud Hoejgaards Vej 1, DK-2860, Soeborg, Denmark
PUB.YT1-1394-000
©CANON INC.2008
Download from Www.Somanuals.com. All Manuals Search And Download.
|