i470D
Series
Start Here
Easy Setup Instructions
Photo Printer
Connect the Printer
To Your Computer
1
Unpack the Printer
2
Prepare the Printer
3
Install the Print Head
4
Install the Ink Tanks
5
1
1
1
1
1 Remove the print head from its package.
Carefully remove all items from the box.
Remove all shipping tape from the front
and sides of the printer.
Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange
protective cap.
Turn the printer off.
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
NOTE: To avoid spilling ink, do not touch
the bottom of the tank once you have
removed the protective cap.
Protective cap
Tear at notch to open
Shipping
Tape
2
Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
2
Remove the orange protective cap.
NOTE: Do not touch the electrical contacts
2
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
i470D Series
Photo Printer
on the back and bottom of the print head.
2
Insert the black ink tank into the slot on
the right, then push in until the ink tank
locks into place.
Electrical
contacts
Paper Rest
3
Press the Power button.
3
Raise the gray lock lever on the printer.
Power
Button
Power
Lamp
Click
USB Port
USB Cable
3
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
Documentation
and Software Kit
4
Open the output tray, then open the front
cover. The print head holder automatically
moves to the center.
4
Slide the print head into the holder until
it is securely seated.
Do not press it down.
i470D Series Print Head
Power Cord
4
Close the front cover, attach the paper rest
and pull out the output tray.
Output Tray
Serial number
5
Lower the lever until it locks into place.
Continue with Step 6
on side two.
Ink Tanks
BCI-24 Black
BCI-24 Color
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Printer Driver (Windows®)
6
Install the Printer Driver (Macintosh®)
7
Align the Print Head
6
8
1
1
5
Click Install. When a message asking for
your confirmation to proceed with the
installation, click Continue Installation.
1
When the Printer Port window appears,
TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.
Turn on your Mac and your printer and insert
the “i470D Setup Software & User's Guide”
CD-ROM.
Be sure to TURN THE PRINTER OFF.
Place a sheet of blank paper in the
paper rest.
Power
Button
Power
Lamp off
2
Start the alignment procedure.
Windows:
2
Double-click the CD-ROM icon, then the
Mac OS X folder, then the Printer Driver
folder.
a. For Windows XP/2000, click Start,
select Control Panel, Printers and
Other Hardware, then Printers and
Faxes.
b. Right-click the Canon i470D icon,
then click Printing Preferences.
NOTE: For Windows® XP or Windows
2000, log on to Windows as an
Administrator before continuing.
NOTE: For Windows 98/Me, click
Start, Settings, then Printers. Right-
click the Canon i470D icon, then
click Properties.
9
When the message “The software was
successfully installed” appears, click
Restart.
6
When the Terminate Installation window
appears, click OK.
10
Access your CD-ROM again. Double-click
the Mac OS X folder, then the Memory Card
Utility folder.
IMPORTANT: If you see the Found
New Hardware Wizard, click Cancel.
NOTE: Remember to register your
product. The serial number is
located on the inside of the printer,
to the right of the print head.
c. Click the Maintenance tab, then click
the Print Head Alignment icon.
3
Double-click the i470D.mpkg icon.
11
Double-click the BJUtility.mpkg icon.
7
When the Other Driver screen appears,
click Install. Then follow the on-screen
instructions.
4
When the “Authenticate” screen appears,
enter your administrator name and
password, then click OK.
d. When asked to start print head
alignment, click OK.
2 Close any open software applications,
then insert the “i470D Setup Software &
User's Guide” CD-ROM. The setup program
should run automatically.
Macintosh OS X:
a. Double-click the Macintosh HD icon, then
Applications folder. Double-click the
Utilities folder, then the Print Center icon.
When the Printer List screen appears,
select i470D.
12
13
Follow the on-screen instructions. If you're
prompted to restart your computer after the
installation, restart your computer.
5
6
When the “Welcome to the BJ printer driver
Installer” screen appears, click Continue.
NOTE: If the setup program does
not run, click Start, then Run, then
type D:\msetup.exe, where D is your
CD-ROM drive.
Click OK when the Terminate Installation
window appears.
Read the Software License Agreement
and click Continue, then click Agree.
Access your CD-ROM again. From the
Application folder, double-click on the
software to be installed.
8
When the software screen appears,
7
click Install.
Select a destination for the printer driver
to be installed. Then click Continue.
Under Printers menu, select Configure
Printer. Select i470D, and click Select.
3
Read the License Agreement, then click
Yes to continue.
4 When the main menu appears, click
Install.
b. Click the down-arrow to select Test Print.
c. Click the Print Head Alignment icon.
Follow the on-screen instructions. When the
“Installation has finished” screen appears,
click OK.
14
9
When the Terminate Installation window
NOTE: Be sure to register your product.
The serial number is located on the
inside of the printer, to the right of the
print head.
appears, click OK, then Exit.
10 Click Yes if you are prompted to restart your
computer
3
4
Follow the on-screen instructions.
IMPORTANT: To ensure highest
quality output, continue with Step 7
Align the Print Head.
Click OK (Windows) or Send (Macintosh)
when finished.
IMPORTANT: To ensure highest
quality output, continue with Step 7
Align the Print Head.
Part no. QA7-2628-V01
40-42409-1102
© 2003 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN VIETNAM
Download from Www.Somanuals.com. All Manuals Search And Download.
|