Canon Digital Camera 4193B001 User Manual

Camera User Guide  
ENGLISH  
Make sure you read this guide before using the camera.  
Store this guide safely so that you can use it in the future.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read This First  
Test Shots  
Take some initial test shots and play them back to make sure the images  
were recorded correctly. Please note that Canon Inc., its subsidiaries and  
affiliates, and its distributors are not liable for any consequential damages  
arising from any malfunction of a camera or accessory, including memory  
cards, that results in the failure of an image to be recorded or to be recorded  
in a way that is machine readable.  
Warning Against Copyright Infringement  
The images recorded with this camera are intended for personal use. Do not  
record images that infringe upon copyright laws without the prior permission  
of the copyright holder. Please be advised that in certain cases the copying  
of images from performances, exhibitions, or cmmercial properties by  
means of a camera or other device may cotrane copyright or other legal  
rights even if the image was shot for persona.  
Warranty Limitations  
This camera’s warranty is ctivin the country of sale. If there is a  
problem with the camera ad, ease return it to the country of sale  
before proceedinwith a waim to a Canon Customer Support Help  
Desk. For CanoCustomer t contacts, please see the customer  
support list suppd with our camera.  
LCD Monitor  
The LCD monitor is made from reinforced glass, but it may break if  
subjected to severe impacts. Please read the Safety Precautions carefully  
(p. 9). In case the glass breaks, exercise adequate caution so as not to  
injure yourself on any broken fragments.  
The LCD monitor is produced with extremely high-precision  
manufacturing techniques. More than 99.99% of the pixels operate to  
specification, but occasionally non-performing pixels may appear as bright  
or dark dots. This is not a malfunction and has no effect on the recorded  
image.  
The LCD monitor may be covered with a thin plastic film for protection  
against scratches during shipment. If so, remove the film before using the  
camera.  
Camera Body Temperature  
Please take care when operating the camera for an extended period as the  
camera body may become warm. This is not a malfunction.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
What Do You Want to Do?  
Shoot  
4
Shoot, leaving it to the camera to make settings. . . . . . . . . . . . . 24  
Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 54 – 56  
Take good people shots  
I F V w P  
Portraits  
(p. 54)  
At night  
(p. 55)  
Kids and pets  
(p. 55)  
At the beach Against snow  
(p. 55)  
(p. 56)  
Shoot various other scenes  
’ t  
Indoors  
(p. 55)  
rewo
p. 5
Low light  
(p. 55)  
Focus on faces . . . . . . . . . . . . . . . . . . . . 24, 60, 62, 84, 86  
Shoot in placewhere I cannot use the flash  
(turn off the flas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Take pictures with me in them too (self-timer) . . . . . . 61, 62, 68, 81  
Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 67  
Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 79  
Add effects and shoot (Fish-eye Effect, Miniature Effect, Creative  
Light Effect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 58, 59  
Change the size of picture I want to take (recording pixels) . . . . 73  
Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
Change the ISO speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Maintain the focus on moving subjects (Servo AF) . . . . . . . . . . . 88  
Make dark subjects appear brighter (i-Contrast) . . . . . . . . . . . . . 91  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
What Do You Want to Do?  
View  
1
Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Automatically play back pictures (slideshow). . . . . . . . . . . . . . 109  
Look at my pictures on a TV. . . . . . . . . . . . . . . . . . . . . . . 114, 116  
Look at my pictures on a computer . . . . . . . . . . . . . . . . . . . . . . 34  
Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 108  
Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 120  
Protect pictures from accidental erasure . . . . . . . . . . . . . . . . . 118  
Shoot/View Movies  
E
Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 102  
Print  
2
Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132  
Save  
Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Other  
3
Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Use the camera abroad . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 142  
Understand what is displayed on the screen.. . . . . . . . . . . . . . 162  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Chapters 1 – 3 explain the basic operations and frequently used functions  
of this camera. Chapters 4 onward explain the advanced functions, letting  
you learn more as you read each chapter.  
Checking the Package Contents .......2  
Changing the Screen Brightness .... 49  
Read This First ..................................3  
What Do You Want to Do? ................4  
Conventions Used in this Guide ........8  
Low Level Memory Card Formatting51  
Safety Precautions.............................9  
(Auto Power Down)..................... 52  
1 Getting Started...............13  
Condons and Commonly  
Using the Touch Panel ....................14  
Charging the Battery........................15  
Compatible Memory Cards  
(Sold Separately).........................17  
g Effects nd Shooting........... 57  
ecting a Smile and Shooting...... 60  
Usg the Wink Self-Timer .............. 61  
Using the Face Self-Timer .............. 62  
Turning the Flash Off ...................... 64  
Inserting the Battery and Memory  
Card......................................
Setting the Date and Time.......
Setting the Display Lague...
Formatting Memory ards............
Pressing the Shutter tton..........23  
Taking Pictures (Smart to)........24  
Viewing Images ...............................28  
Erasing Images................................30  
Shooting Movies ..............................31  
Viewing Movies................................33  
Zooming in Closely on Subjects  
(Digital Zoom) ............................. 65  
Inserting the Date and Time............ 67  
Using the Self-Timer ....................... 68  
4 Choosing Settings  
Yourself ..........................69  
Transferring Images to a Computer  
for Viewing...................................34  
Accessories .....................................38  
Separately Sold Accessories...........39  
Shooting in Program AE.................. 70  
Adjusting the Brightness  
(Exposure Compensation).......... 71  
Turning the Flash On ...................... 71  
Changing the Focus Range  
2 Learning More................41  
(Macro/Infinity)............................ 72  
Changing the Recording Pixel Setting  
(Image Size) ............................... 73  
Components Guide..........................42  
Screen Display.................................43  
Indicator...........................................44  
FUNC. Menu – Basic Operations ....45  
MENU – Basic Operations...............46  
Changing the Compression Ratio  
(Image Quality) ........................... 73  
Changing the ISO Speed ................ 75  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the White Balance........... 76  
Continuous Shooting....................... 78  
Changing the Tone of an Image  
(My Colors)................................. 79  
Shooting Using  
the Two Second Self-Timer........ 80  
Customizing the Self-Timer............. 81  
Changing the Composition  
with the Focus Lock.................... 82  
Playback ...................................108  
Magnifying Images ........................112  
with Touch Actions....................113  
5 Getting More Out of Your  
Camera ...........................83  
Changing the AF Frame Mode........ 84  
Magnifying the Focal Point.............. 85  
Viewing Images on a TV ...............114  
Viewing Images on  
Choosing the Subject to Focus On  
(Touch AF).................................. 86  
a Hi-Definition TV..................116  
Disyg Various Images  
Shooting with the AF Lock .............. 87  
Shooting with Servo AF .................. 8
Changing the Metering Mod. 89  
Shooting with the AE Lock.0  
Shooting with the ck ..
(SmShuffle)..........................117  
otecting mages .........................118  
rasing All Images ........................120  
Organizing Images by Category  
(My Category) ...........................122  
Tagging Images as Favorites........123  
Rotating Images ............................125  
Resizing Images............................126  
Trimming .......................................127  
Correcting the Brhtness and  
Shooting (i-Corast) .................. 91  
Red-Eye Correctio................... 92  
Checking for Shut Eyes .................. 92  
Shooting with Slow Synchro ........... 93  
Shooting Long Exposures............... 94  
Changing the Color and Shooting... 95  
Adding Effects with the My Colors  
Function ....................................128  
Correcting the Brightness  
(i-Contrast)................................129  
Correcting the Red-Eye Effect.......130  
6 Using Various  
Functions for Shooting  
Movies ............................97  
8 Printing.........................131  
Printing Images .............................132  
Printing from the Print List  
(DPOF)......................................133  
Changing the Movie Mode.............. 98  
Changing the Image Quality ........... 98  
AE Lock/Exposure Shift ................ 100  
Other Shooting Functions ............. 101  
Playback Functions....................... 102  
Editing........................................... 103  
Choosing Images for Printing  
(DPOF)......................................134  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conventions Used in this Guide  
9 Customizing Camera  
10Useful Information.......151  
Settings ........................137  
Using Household Power................ 152  
Using an Eye-Fi Card.................... 153  
Troubleshooting ............................ 155  
List of Messages That Appear  
on the Screen ........................... 159  
Changing Camera Settings............138  
Changing Shooting Function  
Settings .....................................145  
Changing Playback Function  
Settings .....................................149  
Handling Precautions.................... 161  
Information Displayed  
on the Screen ........................... 162  
Functions Available  
in Each Shooting Mode............. 164  
Menus ........................................... 166  
Specifications................................ 170  
Conventions Used in s Gide  
Icons are used in the text to sencamera buttons and switches.  
Language that displays on n apears inside [ ] (square  
brackets).  
: Things you ould be cabout.  
: Troubleshoog tips.  
: Hints for getting oout of your camera.  
: Supplemental information.  
(p. xx): Reference pages.“xx” stands for a page number.  
This guide assumes all functions are at their default settings.  
The various types of memory cards that can be used in this camera are  
collectively referred to as memory cards in this guide.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety Precautions  
Before using the camera, please ensure that you read the safety precautions  
described below. Always ensure that the camera is operated correctly.  
The safety precautions noted on the following pages are intended to prevent injuries  
to yourself and other persons, or damage to the equipment.  
Be sure to also check the guides included with any separately sold accessories you  
use.  
Warning  
Caution  
Caution  
Denotes the possibility of serious injury or death.  
Denotes the possibility of injury.  
Denotes the possibility of damage to the equipment.  
Warning  
Camera  
Do not trigger the flash in close proxito pee’s eyes.  
Exposure to the intense light produced h could amage eyesight. In particular,  
remain at least one meter (39 inches) awinfants wen using the flash.  
Store this equipment out ach children and infants.  
Strap: Putting the strap arounneck ould result in asphyxiation.  
Memory card: Dangif sthis curs, contact a doctor immediately.  
Do not attempo disassemer any part of the equipment unless  
expressly indiced to do so in is guide.  
To avoid the risk f injurdo not touch the interior of the camera if it has been  
dropped or otherwdmaged.  
Stop operating the camera immediately if it emits smoke, a strange smell, or  
otherwise behaves abnormally.  
Do not use organic solvents such as alcohol, benzine, or thinner to clean the  
equipment.  
Do not allow liquids or foreign objects to enter the camera.  
This could result in fire or electrical shock.  
If liquid or foreign objects come into contact with the camera interior, immediately turn the  
camera power off and remove the battery.  
Use only recommended power sources.  
Using other power sources could result in fire or electrical shock.  
Battery and Battery Charger  
Use only recommended batteries.  
Do not place the battery near or in direct flame.  
Do not let the battery come into contact with water (e.g. sea water) or other  
liquids.  
Do not attempt to disassemble, alter or apply heat to the battery.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety Precautions  
Avoid dropping or subjecting the battery to severe impacts.  
This may cause explosions or leaks, resulting in fire, injury and damage to the  
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing  
contacts these substances, immediately flush with water and seek medical assistance.  
If the battery charger becomes wet, unplug it from the outlet and consult your camera  
distributor or the closest Canon Customer Support Help Desk.  
Use only the specified battery charger to charge the battery.  
Unplug the power cord periodically and wipe away any dust and dirt that has  
collected on the plug, the exterior of the power outlet, and the surrounding area.  
Do not handle the power cord with wet hands.  
Do not use the equipment in a manner that exceeds the rated capacity of the  
electrical outlet or wiring accessories. Do not use if the power cord or plug are  
damaged, or not fully plugged into the outlet.  
Do not allow dirt or metal objects (such as pins or keys) to contact the charger  
terminals or plug.  
This could result in fire or electrical shock.  
Other Warnings  
Do not play the supplied CD-ROM(s) in playehat does not support  
data CD-ROMs.  
Playing the CD-ROM(s) in an audio Cayer player) could damage the speakers.  
It is also possible to suffer hearing listeg with headphones to the loud sounds  
of a CD-ROM played on a music
aution  
Be careful not to bang mera or subject it to strong impacts or shocks  
when hanging it by the strap.  
Be careful not to bump or push strongly on the lens.  
This could damage the camera or lead to injury.  
Avoid using, placing or storing the camera in the following places.  
-
-
-
Places subject to strong sunlight.  
Places subject to temperatures above 40 °C (104 °F).  
Humid or dusty areas.  
These could cause leakage, overheating or an explosion of the battery, resulting in  
electrical shock, fire, burns or other injuries. High temperatures may also cause  
deformation of the casing.  
The slideshow transition effects may cause discomfort when viewed for  
prolonged periods.  
When using the flash, be careful not to cover it with your fingers or clothing.  
This could result in burns or damage to the flash.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Caution  
Do not aim the camera at bright light sources (the sun, etc.).  
Doing so may cause malfunctions or damage the image sensor.  
When using the camera on a beach or at a windy location, be careful not to  
allow dust or sand to enter the camera.  
This may cause the camera to malfunction.  
In regular use, small amounts of smoke may be emitted from the flash.  
This is due to the high intensity of the flash burning dust and foreign materials stuck to the  
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from  
the flash to prevent heat build-up and damage to the unit.  
Unplug the battery charger from the power outlet after recharging is complete,  
or when you are not using it.  
Do not place anything, such as cloth on top of the battery charger while it is  
charging.  
Leaving the unit plugged in for a long period of timacause it to overheat and distort,  
resulting in fire.  
Remove and store the battery whee not ung the camera.  
If the battery is left inside the camera, daused by akage may occur.  
Before you discard batterer thrminals with tape or other insulators.  
Contacting other metal matere coainers may lead to fire or explosions.  
Do not place the ry n
Pets biting the baty could cae, overheating or explosion, resulting in fire or  
injuries.  
Do not sit down th the amera in your pocket.  
Doing so may cause mfuions or damage the LCD monitor.  
When putting the camera in your bag, ensure that hard objects do not come into  
contact with the LCD monitor.  
Do not attach accessories to the strap.  
Doing so may cause malfunctions or damage the LCD monitor.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Getting Started  
This chapter explains preparatore shoting, how to shoot in  
Amode, and then hviease and print the images you  
take. The latter part of ter xplains how to shoot and view  
movies and trnsfer imcomputer.  
Attaching the Strap/Holding the Camera  
Be sure to attach the supplied strap to the camera and wrap it around your  
wrist when shooting to avoid dropping the camera.  
Keep your arms tight against your body while holding the camera firmly by  
the sides. Be sure that your fingers do not block the flash or touch the  
screen.  
Strap  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Touch Panel  
This camera has a touch panel screen that allows you to perform operations  
with the touch of your finger.  
Touch  
Briefly touch the screen with your  
finger.  
Used for choosing icons or magnifying  
images.  
Double Tap  
Quickly tap the screen twice.  
Used in Playbamode to switch to Index  
Dis
Drag  
Toch and drag your finger across  
the screen.  
Used for playback operations such as  
switching to the next image, or moving the  
displayed location of magnified images.  
Since the camera uses a pressure sensitive touch panel, the camera  
may not recognize touch operations if you install a screen protector.  
What if I cannot perform operations well?  
When touching with your finger does not work well,  
you can use the toggle attached to the strap to  
perform operations. Only use the attached toggle to  
perform operations. Do not use other objects, such  
as pens or pencils.  
You can calibrate the touch panel if you are having  
difficulty choosing items or buttons (p. 144).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Charging the Battery  
Use the included charger to charge the battery. Be sure to charge the battery  
as it is not charged at the time of purchase.  
Remove the cover.  
Insert the battery.  
Align the S marks on the battery and  
charger, then insert the battery by sliding it  
in  
and don  
.
Chthe btery.  
F2LY: Flip out the plug  
he arger into a power outlet  
and plug  
.
or C-2LYE: Plug the power cord into  
e charger, then plug the other end into a  
power outlet.  
B-2LY  
C2LYE  
X The charge lamp lights red and charging  
starts.  
X The charge lamp will light green when  
charging has finished. Charging takes  
approx. 1 hour and 55 minutes.  
Remove the battery.  
Unplug the battery charger from the power  
outlet, then remove the battery by sliding it  
in  
and up  
.
To protect the battery and prolong its life, do not charge it for longer than  
24 hours continuously.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Charging the Battery  
Approximate Number of Shots That Can Be Taken  
Number of Shots  
220  
5
Playback Time (Hours)  
The number of shots that can be taken is based on the Camera & Imaging Products  
Association (CIPA) measurement standard.  
Under some shooting conditions, the number of shots that can be taken may be less  
than mentioned above.  
Battery Charge Indicator  
An icon or message will appear on the screen indicating the battery’s charge state.  
Display  
Summary  
Sufficient charge.  
Slightly depleted, buufficient.  
Nearly deted. Ce the battery.  
Deplearge thbattery.  
(Blinking red)  
“Change the battery pack.”  
Using the battery aer fectively  
Charge the batteon the dday before, it will be used.  
Charged batteries ontinue to disge naturally even if they are not used.  
Attach the cover to a charged battery so that  
the S mark is visible.  
How to store the battery for long periods:  
Deplete and remove the battery from the camera. Attach the terminal cover  
and store the battery. Storing a battery for long periods of time (about a year)  
without depleting it may shorten its life span or affect its performance.  
The battery charger can also be used when abroad.  
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC  
power. If the plug does not fit the outlet, use a commercially available plug  
adapter. Do not use electrical transformers for foreign travel as they will cause  
damage.  
The battery may develop a bulge.  
This is a normal characteristic of the battery and does not indicate a problem.  
However, if the battery bulges to the point where it will no longer fit into the  
camera, please contact a Canon Customer Support Help Desk.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Compatible Memory Cards (Sold Separately)  
If the battery is quickly depleted even after charging, it has reached the  
end of its life span.  
Purchase a new battery.  
Compatible Memory Cards  
(Sold Separately)  
SD memory cards (2 GB and less)*  
SDHC memory cards (more than 2 GB, up to and including 32 GB)*  
SDXC memory cards (more than 32 GB)*  
MultiMediaCards  
MMCplus memory cards  
HC MMCplus memory cards  
Eye-Fi Cards (see below)  
* This memory card complies with the SD stadar. Some cards may not  
operate properly depending on the brand of csed.  
Depending on your computer'sion, SXC memory cards may  
not be recognized whing a mercially available card reader.  
Check to make sure OS upports this function beforehand.  
About Eye-Cards  
This product is nguaraeed to support Eye-Fi card functions (including  
wireless transfer). In aof an issue with an Eye-Fi card, please check with  
the card manufacturer.  
Also note that an approval is required to use Eye-Fi cards in many countries  
or regions. Without approval, use of the card is not permitted. If it is unclear  
whether the card has been approved for use in the area, please check with  
the card manufacturer.  
Inserting the Battery and Memory Card  
Insert the included battery and a memory card (sold separately).  
Check the card’s write-protect tab.  
If the memory card has a write-protect tab,  
you will not be able to record images if the  
tab is in the locked position. Slide the tab  
up until you hear a click.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Inserting the Battery and Memory Card  
Open the cover.  
Slide the cover  
and open it  
.
Insert the battery.  
Insert the battery as shown until it locks  
into place with a click.  
Be sure to insert the battery in the correct  
direction or it will not properly lock into  
place.  
Terminals  
Insert the mery card.  
Insemory ard as shown until it  
locks lace with a click.  
sure he memory card is oriented  
ctly. nserting the memory card in the  
g direction could damage the  
camera.  
Terminals  
Close the cover.  
Close the cover  
, and press downward  
as you slide it until it clicks into place  
.
What if [Memory card locked] appears on the screen?  
SD, SDHC and SDXC memory cards have a write-protect tab. If this tab is in the  
locked position, [Memory card locked] will appear on the screen and you will not  
be able to take or erase images.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Inserting the Battery and Memory Card  
Removing the Battery and Memory Card  
Remove the battery.  
Open the cover and press the battery lock  
in the direction of the arrow.  
X The battery will pop up.  
Remove the memory card.  
Push the memory card in until you hear a  
click, then slowly release it.  
X The memory ard will pop up.  
Approximate Numbhotper Memory Card  
Memory Card  
58  
16 GB  
4334  
Number of sho
Values are based othe dult settings.  
The number of shots thcan be taken will vary depending on camera settings, the  
subject and the memory card used.  
Can you check the number of shots that can be taken?  
You can check the number of shots that can be taken when the camera is in a  
Shooting mode (p. 24).  
Number of shots that  
can be taken  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting the Date and Time  
The Date/Time settings screen will appear the first time the camera is turned  
on. Since the dates and times recorded into your images are based on these  
settings, be sure to set them.  
Turn on the camera.  
Press the power button.  
X The Date/Time screen will appear.  
Set the date and time.  
Touch the option you want to set.  
X opwill appear
Touch opo sa value.  
Comphe setng.  
uch .  
the date and time have been set,  
ate/Time screen will close.  
ssing the power button will turn off the  
camera.  
Reappearing Date/Time screen  
Set the correct date and time. If you have not set the date and time, the Date/  
Time screen will appear each time you turn on the camera.  
Daylight saving time settings  
If you touch  
in Step 2 and then choose  
, you will set the time to daylight  
saving (1 hour ahead).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting the Display Language  
Date/Time battery  
The camera has a built-in date/time battery (backup battery) that allows the  
date/time settings to be retained for about three weeks after the battery pack  
has been removed.  
By inserting a charged battery or connecting an AC adapter kit (sold  
separately, p. 39) the date/time battery can be charged in about 4 hours even if  
the camera is not turned on.  
If the date/time battery is depleted, the Date/Time menu will appear when you  
turn the camera on. Follow the steps on p. 20 to set the date and time.  
Setting the Display Language  
You can change the language that displays on the screen.  
Enter Playk mode.  
e 1bton.  
play the settings screen.  
Touch and hold n.  
X The settings screen will appear.  
Set the display language.  
Touch a display language, then touch Ú.  
X Once the display language has been set,  
the settings screen will close.  
What if ndoes not appear?  
When there are images on the memory card, touch øat the bottom left of the  
screen to display n.  
You can also change the display language by touching ø, then  
n. Choose the 3tab in the screen that appears, then choose the  
[Language] menu item.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Formatting Memory Cards  
Before you use a new memory card or one that has been formatted in other  
devices, you should format the card with this camera. Formatting (initializing)  
a memory card erases all data on the memory card. As you cannot retrieve  
the erased data, exercise adequate caution before formatting the memory  
card.  
Before formatting an Eye-Fi card, be sure to install the software contained  
on the card to a computer.  
Display the menu.  
Touch ø, then touch n.  
Choose [Format].  
Touch the 3tab.  
Drag vertically up or down the screen to  
choose [Format].  
Touch [Format].  
Format the memory card.  
Touch [OK].  
X A confirmation screen will appear.  
Touch [OK].  
X The memory card will be formatted.  
X When formatting ends, [Memory card  
formatting complete] will appear on the  
screen.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Pressing the Shutter Button  
Touch [OK].  
Formatting or erasing data on a memory card merely changes the file  
management information on the card and does not ensure its contents  
are completely erased. Be careful when transferring or disposing of a  
memory card. When disposing of a memory card, take precautions such  
as physically destroying the card to prevent personal information leaks.  
The total capacity of the memory card displayed in the formatting screen  
may be less than indicated on the memory ard.  
Pressing the Shuttuttn  
To take images that are in be to first press the shutter button  
lightly (halfway) to focus, s futo shoot.  
Press halfway (lightly to focus).  
Press lightly until the camera beeps twice  
and AF frames appear where the camera  
focused.  
Press fully (all the way to shoot).  
X The camera plays the shutter sound and  
takes the shot.  
Since the shot is being taken while the  
shutter sound plays, be careful not to  
move the camera.  
Does the length of the shutter sound change?  
Since the time required to shoot differs according to the scene you want to  
take, the length of the shutter sound may change.  
If the camera or subject moves while the shutter sound is playing, the recorded  
image may be blurry.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Taking Pictures (Smart Auto)  
If you shoot without pressing the shutter button halfway, the image may  
not be in focus.  
Taking Pictures (Smart Auto)  
Since the camera can determine the subject and shooting conditions, you  
can let it automatically select the best settings for the scene and just shoot.  
The camera can also detect and focus on faces, setting the color and  
brightness to optimal levels.  
Turn on the camera.  
Press the power button.  
X The start-up scrn will appear.  
ChooAmoe.  
et thde switch to A.  
n yu point the camera toward the  
ct, the camera will make a slight  
as it determines the scene.  
X The icon for the determined scene will  
appear in the upper left of the screen.  
X The camera will focus on detected faces  
and display frames on them.  
Compose the shot.  
Moving the zoom lever toward iwill  
zoom in on your subject, making it appear  
larger. Moving the lever toward jwill  
zoom out from your subject, making it  
Zoom Bar  
appear smaller (the zoom bar will appear).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Taking Pictures (Smart Auto)  
Choose a subject to focus on.  
Touch the screen to choose the person or  
location to focus on (Touch AF).  
X The camera will beep and  
will appear  
on the screen.  
Focus.  
Press the shutter button halfway to focus.  
X When the camera focuses, it will beep  
twice, a blue AF frame will appear, and  
the focus and exposure will be continually  
adjusted (Seo AF).  
Sh
AF Frame  
Prethe shutter button fully.  
he cmera will play the shutter sound  
d shoot. The flash will automatically fire  
in low light conditions.  
X The image will appear on the screen for  
about two seconds.  
You can take a second picture even while  
an image is displayed by pressing the  
shutter button again.  
If you press the shutter button halfway instead of touching the screen as  
shown on p. 24, the camera will automatically detect subjects, and AF  
frames will appear where the camera focused.  
When a green frame appears, the focus and exposure will be locked.  
A blue frame appears when a moving subject is detected; the focus and  
exposure will continuously adjust (Servo AF).  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Taking Pictures (Smart Auto)  
Scene Icons  
The camera displays an icon for the scene it has determined and then  
automatically focuses and selects the optimum settings for subject  
brightness and color.  
Including Blue Skies  
Background  
Bright  
Backlit  
Dark  
Sunsets  
WhenUsing  
Tripod  
Subject  
People  
Backlit  
*
When Moving  
Non-Human Subjects/  
Landscapes  
*
Close Subjects  
Icon Background  
Color  
Gray  
e  
Onge  
Dark Blue  
* Appears when the scene is de cmera is attached to a tripod.  
Under certain ondionshat appears may not match the actual  
scene. Especlly when theorange or blue colored background (a  
wall for exam),  
r the “Including Blue Skies” icons may appear  
and it may not bpossle to shoot with the appropriate color. If this  
happens, try shooting in Gmode (p. 70).  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking Pictures (Smart Auto)  
What if...  
What if white and gray frames appear when you point the camera toward  
a subject?  
When faces are detected, a white frame appears on the face of the main  
subject, while gray frames appear on other detected faces. The frames will  
follow the subjects within a certain range (p. 84). If the main subject moves,  
however, the gray frames will disappear.  
What if a flashing  
appears?  
Attach the camera to a tripod so that the camera does not move and blur the  
image.  
What if the image comes out dark even if the flash fired when shooting?  
The subject is too far away for the flash to reach. Move the zoom lever toward  
jand hold it until the lens stops moving. The camera will be at its maximum  
wide angle setting and you can shoot within the fective flash range of  
approximately 50 cm – 3.5 m (1.6 – 11 ft.).  
Move the zoom lever toward iand it untie lens stops moving. The  
camera will be at its maximum teletting ayou can shoot within the  
effective flash range of apprimatem – 2.0 m (3.0 – 6.6 ft.).  
What if the camera beewhethe shutter button is pressed  
halfway?  
Your subject my be too cthe zoom lever toward jand hold it until  
the lens stops oving. The cwill be at its maximum wide angle setting  
and you will be ble to fus on subjects that are about 5 cm (2 in.) or more  
away from the enof thlens.  
Move the zoom lever toward iand hold it until the lens stops moving. The  
camera will be at its maximum telephoto setting and you will be able to focus  
on subjects that are about 90 cm (3.0 ft.) or more away from the end of the  
lens.  
What if the lamp lights when the shutter button is pressed halfway?  
To reduce red-eye and to assist in focusing, the lamp may light when shooting  
in dark areas.  
What if the hicon blinks when you try to shoot?  
The flash is charging. You can shoot when recharging ends.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing Images  
You can view the images you have taken on the screen.  
Enter Playback mode.  
Press the 1button.  
X The last image you took will appear.  
Choose an image.  
Dragging horizontally across the screen  
from left to right will cycle through the  
images in the reverse order they were  
taken, from the nwest image to the  
oldest.  
Dragginhorizlly across the screen  
from left wcycle through images  
in the they wee taken, from oldest  
ew.  
touh the left edge of the screen  
e frame  
on the screen at the left),  
qwill appear and images will display in  
the reverse order they were taken, from  
the newest image to the oldest.  
If you touch the right edge of the screen  
(inside frame  
on the screen at the left),  
rwill appear and images will display in  
the order they were taken, from oldest to  
newest.  
The images change more quickly if you  
touch and hold qr.  
The lens will retract after approximately 1  
minute elapses.  
Pressing the 1button again while the  
lens is retracted will turn off the power.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing Images  
Switching to Shooting mode  
Pressing the shutter button halfway while in Playback mode switches the  
camera to Shooting mode.  
Active Display  
When an image is displayed, lightly tapping the camera as shown below will  
switch to the next image.  
Be sure to put the strap around your wrist, and hold the camera firmly to  
avoid dropping it.  
Depending on the way you tap the camera, images may not switch.  
Switch next imge  
Switch to previous image  
Tilt the camera to switch images  
If you touch and hold qat the left of the screen  
and tilt the camera as shown while switching  
through images, the images advance quickly. Tilt  
the camera in the opposite direction while holding  
r.  
While dragging an image, if you touch and hold qor rthe image will  
appear coarse.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Erasing Images  
You can choose and erase images one at a time. Please note that erased  
images cannot be recovered. Exercise adequate caution before erasing an  
image.  
Enter Playback mode.  
Press the 1button.  
X The last image you took will appear.  
Choose an image to erase.  
Drag horizontally across the screen to  
choose an image
Erasmage
ag ass the screen as shown.  
e?] ill appear.  
Touch [Erase].  
X The displayed image will be erased.  
To exit instead of erasing, touch [Cancel].  
You can also erase images in the  
following ways.  
Touch ø, then drag vertically up or  
down the screen to choose /, and touch  
[Erase].  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting Movies  
The camera can automatically select all settings so that you can shoot  
movies just by pressing the shutter button.  
If you continue shooting for a long time, the camera may become warm. This  
is not a malfunction.  
Enter Emode.  
Set the mode switch to E.  
Shooting Time  
mpse the shot.  
oving the zoom lever toward iwill  
zoom in on your subject, making it appear  
larger. Moving the lever toward jwill  
zoom out from your subject, making it  
appear smaller.  
Focus.  
Press the shutter button halfway to focus.  
X When the camera focuses, it will beep  
twice.  
Shoot.  
Press the shutter button fully.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting Movies  
Elapsed Time  
X Recording will start, and [ Rec] and the  
elapsed time will appear on the screen.  
Once shooting begins, take your finger off  
the shutter button.  
If you change the composition of your shot  
during shooting, the focus will stay the  
same, but the brightness and tone will  
automatically adjust.  
Do not touch the microphone while  
shooting.  
Do not press any buttons other than the  
shutter button while shooting. The sound  
the buttons make will be recorded in the  
movie.  
Microphone  
Stop shootin
Preutter btton fully again.  
he ca will beep once and stop  
otinthe movie.  
moviwill record to the memory card.  
ting will automatically stop when the  
memory card fills.  
Magnifying the subject while shooting  
Pressing the zoom lever toward iwhile shooting will zoom in on the subject.  
However, operation sounds will be recorded and the movie may appear coarse.  
Estimated Shooting Times  
Memory Card  
Shooting Time  
4 GB  
16 GB  
21 min. 23 sec.  
1 hr. 27 min. 37 sec.  
Shooting times are based on default settings.  
Maximum clip length is approx. 10 minutes.  
Recording may stop even if the maximum clip length has not been reached on some  
memory cards. SD Speed Class 4 or higher memory cards are recommended.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing Movies  
You can view the movies you have shot on the screen.  
Enter Playback mode.  
Press the 1button.  
X The last image you shot will appear.  
X
appears on movies.  
Choose a movie.  
Drag horizontally across the screen to  
choose a movie to play back.  
Play the me.  
.
X Tie will py.  
If ytouch the screen during playback,  
e mvie will stop, and the movie control  
nel will appear on the screen.  
Drag vertically up or down the screen  
during playback to adjust the volume.  
X After the movie finishes,  
appears.  
What if you can't play back movies on a computer?  
Install the included software (p. 35).  
When watching a movie on a computer, frames may drop, it may not play  
smoothly, and the audio may stop suddenly depending on the computer’s  
capabilities.  
If you use the supplied software to copy the movie back onto the memory card,  
you can play back the movie smoothly with the camera. For enhanced  
playback you can also connect the camera to a TV.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring Images to a Computer for  
Viewing  
You can use the included software to transfer images you have shot with the  
camera to a computer for viewing. If you are already using ZoomBrowser  
EX/ImageBrowser, install the software from the included CD-ROM,  
overwriting your current installation.  
System Requirements  
Windows  
Windows 7  
Windows Vista (including Service Pack 1 and 2)  
Windows XP Service Pack 2, Service Pack 3  
OS  
The above OS should be pre-installed n computers with built-in  
USB ports.  
Computer model  
CPU  
Viewing images Pentium 1.3 GHher  
Viewing movies Core2 6 GHz higher  
Windows 7 (64 bit): 2 GB
Windows 7 (3indoista: 1 GB or more  
Windows XPmo(still images), 1 GB or more (movies)  
RAM  
Interface  
US
Free Hard Disk  
Space  
ZmBrowser EB or more*  
PhoStitch: 40 MB or more  
Display  
1,02768 xels or higher  
* For Windows XP, Microsoft .NET Framework 3.0 or later (max. 500MB) must be  
installed. Installation may take some time depending on your computer’s capabilities.  
Macintosh  
Mac OS X (v10.4 – v10.6)  
OS  
The above OS should be pre-installed on computers with built-in  
USB ports.  
Computer model  
Viewing images PowerPC G4/G5 or Intel Processor  
Viewing movies Core Duo 1.66 GHz or higher  
CPU  
Mac OS X v10.4 – v10.5: 512 MB or more  
Viewing images  
Mac OS X v10.6: 1 GB or more  
RAM  
Viewing movies 1 GB or more  
Interface  
USB  
Free Hard Disk  
Space  
ImageBrowser: 300 MB or more  
PhotoStitch: 50 MB or more  
Display  
1,024 x 768 pixels or higher  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Transferring Images to a Computer for Viewing  
Preparations  
Windows Vista and Mac OS X (v10.5) are used for these explanations.  
Install the Software.  
Windows  
Place the CD in the computer’s  
CD-ROM drive.  
Place the supplied CD-ROM (DIGITAL  
CAMERA Solution Disk) (p. 2) into the  
computer’s CD-ROM drive.  
Begin insllaon.  
Casy Inallation] and follow the on-  
sstructis to proceed with the  
instion.  
the User Account Control] window  
pears, follow the on-screen instructions  
proceed.  
When the install finishes, click  
[Restart] or [Finish].  
Remove the CD-ROM.  
Remove the CD-ROM when your desktop  
screen appears.  
Macintosh  
Place the CD in the computer’s  
CD-ROM drive.  
Place the supplied CD-ROM (DIGITAL  
CAMERA Solution Disk) (p. 2) into the  
computer’s CD-ROM drive.  
Begin installation.  
Double-click the  
on the CD.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring Images to a Computer for Viewing  
Click [Install], and follow the on-screen  
instructions to proceed with the  
installation.  
Connect the camera to the  
computer.  
Turn off the camera.  
Open the cover, and insert the small end  
of the plug firmly into the camera terminal  
in the direction shown.  
Insert the cable’s larger plug into the  
computer. For connection details, refer to  
the user guide provided with the computer.  
Turn on the caera.  
Press the 1 utn to turn on the camera.  
Open eraWidow.  
Ws  
[Donloads Images From Canon  
ra using Canon CameraWindow].  
X ameraWindow will appear.  
If CameraWindow does not appear, click  
the [Start] menu and choose  
[All Programs], followed by [Canon  
Utilities], [CameraWindow] and  
[CameraWindow].  
Macintosh  
X CameraWindow will appear when you  
establish a connection between the  
camera and computer.  
If CameraWindow does not appear, click  
the CameraWindow icon on the Dock (the  
bar which appears at the bottom of the  
desktop).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Transferring Images to a Computer for Viewing  
For Windows 7, use the following steps to display CameraWindow.  
Click  
on the task bar.  
In the screen that appears, click the  
link to modify the program.  
Click [Downloads Images From Canon Camera using Canon  
CameraWindow], then click [OK].  
Double click  
.
Transfer and View Images  
Click [Import Images from Camera], and  
then click [Import Untransferred Images].  
X All images not previously transferred will  
transfer to the computer. Transferred  
images will bsorted by date and saved in  
separate ds in the Pictures folder.  
mage port complete.] appears,  
c], then ick [X] to close  
CaraWindow.  
urn ff the camera and unplug the cable.  
r further operations, refer to the  
Software Guide.  
You can tranfer imges without installing the included software by  
simply connecting your camera to a computer. There are, however, the  
following limitations.  
After connecting to the camera, it may take a few minutes until you can  
transfer images.  
Movies will not transfer correctly.  
Images shot in the vertical position may be transferred in the horizontal  
position.  
Protection settings for images may be lost when transferred to a  
computer.  
There may be problems transferring images or image information  
correctly depending on the version of the operating system in use, the  
file size, or the software in use.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Supplied with Camera  
*
Wrist Strap  
WS-DC10  
DIGITAL CAMERA  
Solution Disk  
Battery Pack NB-6L  
(with Terminal Cover)  
Battery Charger  
CB-2LY/CB-2LYE  
*
AV Cable  
AVC-DC400  
*
Interface Cable  
*
IFC-400PCU  
*Also avafor purchase separately.  
M
Card Reader  
Windows/Macintosh  
anonBrand PictBridge Compliant Printers  
Compact Photo Printers  
(SELPHY series)  
Inkjet Printers  
(PIXMA series)  
See the user guide supplied with the printer for more information on the printer  
and interface cables.  
TV/Video  
HDMI Cable HTC-100  
High-Definition TV  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Separately Sold Accessories  
The following camera accessories are sold separately.  
Some accessories are not sold in some regions, or may no longer be  
available.  
Power Supplies  
AC Adapter Kit ACK-DC40  
This kit lets you power the camera using  
household power. Recommended for  
powering the camera for an extended period  
of time or when connecting to a computer or  
printer. Cannot be used to charge the battery  
inside the camera.  
Battery ChargCB-2LY/CB-2LYE  
An adapter farging Battery Pack NB-6L.  
atteack NB-6L  
hareable lithium-ion battery.  
CAUTION  
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.  
Using Accessories Abroad  
The battery charger and the AC adapter kit can be used in regions that have 100  
– 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a  
commercially available plug adapter. Do not use electrical transformers for  
foreign travel as they will cause damage.  
Other Accessories  
HDMI Cable HTC-100  
Use this cable to connect the camera to the  
HDMI™ terminal on a high-definition TV set.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Separately Sold Accessories  
Printers  
Canon-Brand PictBridge Compliant  
Printers  
By connecting your camera to a Canon-brand  
PictBridge compliant printer, you can print  
your images without having to use a  
computer.  
SELPHY series  
PIXMA series  
For more information, visit your nearest  
Canon retailer.  
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performawhen used with genuine  
Canon accessories. Canon shall not be liay dame to this product and/or  
accidents such as fire, etc., caused by the on of nogenuine Canon  
accessories (e.g., a leakage and/osion battery pack). Please note that this  
warranty does not apply to repaut ohe malfunction of non-genuine  
Canon accessories, although yoest sh repairs on a chargeable basis.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Learning More  
This chapter explains the parts camerand what appears on  
the screen, as well as tsic ating instructions.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Components Guide  
Zoom Lever  
Strap Mount (p. 13)  
Shooting: i(Telephoto) / j(Wide  
Angle) (p. 24)  
Playback: k(Magnify) / g(Index)  
(pp. 106, 112)  
Shutter Button (p. 23)  
Power Button (p. 24)  
1(Playback) Button  
(pp. 28, 105, 131)  
A/V OUT (Audio/Video Output) /  
DIGITAL Terminal (pp. 36, 114, 132)  
Lens  
Lampp0 – 62, 68, 145)  
ash (p, 71)  
aker  
en (LCD onitor) (p. 43)  
ripod Socket  
Mode Switch  
Indicator (p. 44)  
C Coupler Terminal Cover (p. 152)  
Mmory Card / Battery Cover (p. 18)  
Microphone (p. 32
HDMI Terminal (p. 6)  
Mode Switch  
Use the mode switch to change the Shooting mode.  
You can leave it to the camera  
to select settings for fully  
automatic shooting (p. 24).  
For shooting movies  
(pp. 31, 97).  
You can shoot with the best settings for  
the scene (p. 54) or choose settings  
yourself to take various types of pictures  
(pp. 53, 69, 83).  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Screen Display  
Switching the Display  
You can change the screen display by touching l.  
Refer to p. 162 for details on information that appears on the screen.  
Shooting  
Information Display  
o Information Display  
Playback  
Simple Informan  
Detailed Information  
Display  
Focus Check Display  
(p. 111)  
Display  
Touching  
while in Playback mode will hide all image information and  
icons, but you can still switch images (pp. 28, 29). Touching the center  
of the screen will restore the original display mode.  
You can also switch the display by touching lwhile the image  
displays right after shooting. However, Simple Information Display is not  
available, and image information will not display. You can change the  
first screen that displays by choosing the 4tab, and [Review Info]  
(p. 146).  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Indicator  
Screen Display in Dark Shooting Conditions  
The display automatically brightens when shooting in dark conditions,  
allowing you to check the composition (Night Display function). However, the  
brightness of the image on the screen, and the brightness of the actual  
image recorded may be different. Screen noise may appear and the  
movement of the subject may appear somewhat jagged on the screen. This  
has no effect on the recorded image.  
Overexposure Warning during Playback  
In “Detailed Information Display” (p. 43), overexposed areas of the image  
flash on the screen.  
Histogram during Playback  
The graph that pes in “Detailed  
Information isplay43) is called the  
histograhistogrm shows the  
distributioightness n an image  
tallynd the amount of brightness  
Whn the graph approaches the  
the image is bright, but when it  
aphes the left side, the image is dark,  
and in this way you can judge the exposure.  
High  
Low  
Dark  
Bright  
Indicator  
The indicator on the top of the camera (p. 42) will light or blink depending on  
the camera’s status.  
Colors  
Status  
Lights  
Blinks  
Operation Status  
Display off (p. 142)  
Recording/reading/transmitting image data  
Green  
When the indicator blinks green, data is being recorded to/read from the  
memory card or various information is being transmitted. Do not turn off  
the power, open the memory card slot/battery cover, shake or jolt the  
camera. These actions may corrupt the image data or cause the camera  
or memory card to malfunction.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
FUNC. Menu – Basic Operations  
Commonly used shooting functions can be set with the FUNC. menu. The  
menu items and options differ depending on the mode (pp. 164 – 165).  
Display the FUNC. menu.  
Touch ø.  
Choose a menu.  
Drag vertically up or down the menu to the  
left, or touch a menu item to choose it.  
dragging oscreen outside of the menu.  
he meitem you chose again, or  
toe menu n the right.  
ooe an option to set.  
ag vertically up or down the menu on  
e right, or touch an item to choose it.  
You can also choose menu items by  
dragging on the screen outside of the  
menu.  
Touch the menu item you chose again, or  
touch Ú.  
X The item will be set, and the original  
screen will reappear.  
To choose a different item from the menu  
on the left, touch the appropriate item.  
In the screen in Step 2, you can also touch  
items to choose them in the menu to the  
right.  
The options on the right will not appear if you have selected any of the  
following items from the FUNC menu while in Playback mode: \  
(p. 125), c(p. 133), :(p. 118),  
;(p. 122).  
(p. 123), /(p. 120),  
(p. 117),  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MENU – Basic Operations  
Various functions can be set from the menus. The menu items are organized  
under tabs, such as for shooting (4) and playback (1). The available  
menu items differ depending on the mode (pp. 166 – 169).  
Display the menu.  
Touch ø, then touch n.  
oostab.  
h a ab, or move the zoom lever  
) left or right to choose a tab.  
Touch a menu item to choose it.  
Drag vertically up or down the screen, or  
touch an item to choose it.  
Some items require you to touch the item  
to display a submenu in which you change  
the setting.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MENU – Basic Operations  
Choose an option.  
For items that display qrto the left and  
right, touch qrto change settings.  
For items that display a bar, touch the  
spot on the bar where you want to make  
the setting.  
Complete the setting.  
Touch Ú.  
X The normal screen will reappear.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Sound Settings  
You can silence or adjust the volume of camera sounds.  
Muting Sounds  
Display the menu.  
Touch ø, then touch n.  
Choose [Mute].  
Touch the 3tab.  
Drag vertically up or down the screen to  
choose [Mute], then touch qrto choose  
[On].  
Adjusting the Volume  
Displamenu
ch ø, then touch n.  
e [Volume].  
ch the 3tab.  
Drag vertically up or down the screen to  
touch [Volume].  
Change the volume.  
Drag vertically up or down the screen to  
choose an item, then touch the point on  
the bar where you want to change the  
volume.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Changing the Screen Brightness  
You can change the screen brightness.  
Display the menu.  
Touch ø, then touch n.  
Choose [LCD Brightness].  
Touch the 3tab.  
Drag vertically up or down the screen to  
choose [LCD Brightness].  
Change the brightness.  
Touch the pot on the bar where you  
want to chthe brightness.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
When you have mistakenly changed a setting, you can reset the camera to  
the default settings.  
Display the menu.  
Touch ø, then touch n.  
Choose [Reset All].  
Touch the 3tab.  
Drag vertically up or down the screen to  
touch [Reset All].  
Reset the settigs.  
Touch [OK].  
X The a will urn to default settings.  
Are there fuctns not be reset?  
The [Date/Time] (p143) in the 3tab, [Language] (p. 21), [Video System]  
(p. 114), [Time Zone(p. 14, and the image registered in [Start-up Image]  
(p. 139), [Calibration] (4).  
The saved data for custom white balance (p. 77).  
Colors that were chosen in Color Accent (p. 95) or Color Swap (p. 96).  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Low Level Memory Card Formatting  
Perform low level formatting when you think that the recording/reading  
speed of a memory card has dropped. Performing a low-level format on a  
memory card erases all data on the memory card. As you cannot retrieve the  
erased data, exercise adequate caution before performing a low-level format  
on the memory card.  
Display the [Format] screen.  
Follow Steps 1 and 2 on p. 22.  
Perform the low level format.  
Touch the frame to the left of [Low Level  
Format] to display a  
.
Touch [OK].  
X A confirmoscreen will appear.  
TOK].  
X Ll formang starts.  
Whlow level formatting ends, [Memory  
ard frmatting complete] will appear.  
uch [OK].  
About lolevel ormatting  
If the [Memory card error] message appears, or if the camera does not work  
correctly, performing a low level format may solve the problem. Copy the images  
from the memory card to a computer or other device before performing a low  
level format.  
Low level formatting may take longer than standard formatting, since all  
recorded data are erased.  
You can stop a low level format of a memory card by touching [Stop].  
When stopping low level formatting, the data will be erased but the  
memory card can be used without problem.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power Saving Function  
(Auto Power Down)  
To save battery power, the camera shuts down automatically when it is not  
operated for a certain time.  
Power Saving during Shooting  
The screen will turn off approximately 1 minute after the camera is last  
operated. After about 2 more minutes, the lens will retract and the power will  
turn off. When the screen has turned off but the lens has not yet retracted,  
pressing the shutter button halfway (p. 23) turns on the screen and shooting  
can continue.  
Power Saving during Playback  
The power will turn off approximately 5 minutes aftthe camera is last  
operated.  
You can turn off the Power Savion (p. 41).  
You can adjust the time bfore then turns off (p. 142).  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Used Functions  
This chapter explains how to shoon diffnt conditions, as well as  
how to use common functions, s the sf-timer.  
When you choose a Shooting mode that matches a particular set of  
conditions, the camera will automatically select any necessary settings.  
All you need do is press the shutter button to take an optimized picture.  
This chapter assumes the mode switch is set to Afor “Turning the  
Flash Off” (p. 64) to “Using the Face Self-Timer” (p. 62). When shooting in  
a mode other than A, check which functions are available in that mode  
(pp. 164 – 167).  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in Various Conditions  
The camera will select the necessary settings for the conditions in which you  
wish to shoot when you choose the matching mode.  
Set the mode switch to 4(p. 42).  
Choose the desired shooting  
mode.  
Touch G.  
Toucor draquickly across the  
screontally display other scene  
odes
ose e desired shooting mode.  
X A summary of the chosen shooting mode  
will appear.  
Touch the screen again to make the  
setting.  
If you touch Ú, the camera will return to  
the shooting mode selection screen.  
Shoot.  
ITake portraits (Portrait)  
Produces a soft effect when  
photographing people.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Shooting in Various Conditions  
FTake snapshots at night  
(Night Snapshot)  
Lets you take beautiful snapshots of city  
nightscapes or people against night  
backgrounds.  
If you hold the camera firmly, you can take  
pictures with reduced camera shake, even  
without a tripod.  
VTake shots of kids and pets  
(Kids&Pets)  
Lets you capture subjects that move  
around, such as children and pets, without  
missing photopportunities.  
Take indshots (Indoor)  
shoot doors with natural colors.  
ake shots in low light conditions  
(Low Light)  
Depending on the scene, the ISO speed  
will be set higher and the shutter speed  
faster than in Amode so that you can  
shoot in dark places with reduced camera  
shake and subject blur.  
A recording pixel setting of  
will appear,  
and the image will be fixed at 2144 x 1608  
pixels (p. 73).  
wTake shots of people at the  
beach (Beach)  
Lets you take shots of brightly lit people  
on sandy beaches where the reflected  
sunlight is strong.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Shooting in Various Conditions  
OTake shots of foliage (Foliage)  
Lets you shoot trees and leaves, such as  
new growth, autumn leaves or blossoms,  
in vivid colors.  
PTake shots of people in snow  
(Snow)  
Lets you take bright, natural-colored shots  
of people against snowy backgrounds.  
tTake shots of fireworks  
(Fireworks)  
Lets you take shs of fireworks in vivid  
colors.  
In tmode, attach the camera to to prevnt the camera from  
moving and blurring the image. Adly, you sould set [IS Mode] to  
[Off] (p. 147).  
In F, Vor mode, imappear coarse because the ISO speed  
(p. 75) is incrsed to match shooting conditions.  
Modes for other scenes  
In addition to the modes explained here, the following scene modes are also  
available.  
Smart Shutter  
Smile (p. 60)  
-
-
-
Wink Self-Timer (p. 61)  
Face Self-Timer (p. 62)  
TColor Accent (p. 95)  
YColor Swap (p. 96)  
Fish-eye Effect (p. 57)  
Miniature Effect (p. 58)  
Creative Light Effect (p. 59)  
Long Shutter (p. 94)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Adding Effects and Shooting  
You can add various effects to images when shooting.  
Shoot with the effects of a fish-eye lens  
(Fish-eye Effect)  
Lets you shoot with the distorting effect of a fish-eye lens.  
Choose  
.
Choose  
in Steps 1 – 2 on p. 54.  
Choose an effect.  
Touch  
.
X [Effect Levelwill appear on the screen.  
rto cose an option.  
X Yon check the effect on the screen.  
ouÚ.  
ot.  
Since you may t achieve the expected results depending on the  
shooting conditions, try taking some test shots first.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Adding Effects and Shooting  
Take shots that look like a miniature model  
(Miniature Effect)  
Blurs chosen portions in the top and bottom of an image to produce the  
effect of a miniature model.  
Choose  
.
Choose  
in Steps 1 – 2 on p. 54.  
X A white frame (the area that will not be  
blurred) appears on the screen.  
Set the frame position and size.  
To change the frme position, touch the  
screen.  
To chhe framsize, touch  
to  
ose  
,
or  
, then touch Ú.  
Holding the camera vertically will change the orientation of the frame.  
Since you may not achieve the expected results depending on the  
shooting conditions, try taking some test shots first.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Adding Effects and Shooting  
Special Effects for Night Backgrounds  
(Creative Light Effect)  
Light displays, and other points of light in nighttime backgrounds behind your  
subject can be changed into any of six predetermined shapes. Be sure to  
use the flash when shooting.  
Choose  
.
Choose  
in Steps 1 – 2 on p. 54.  
Choose a shape and size.  
Touch  
.
X [Select Effectwill appear on the screen.  
e desid shape.  
Toopto change the size.  
TouÚ.  
Shoot.  
Shooting tips  
Hold the camera firmly and shoot non-moving points of light in as dark a  
location as possible.  
Make sure your subject is within the range of the flash (p. 71). Also make sure  
the subject is not illuminated by any other light sources.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Detecting a Smile and Shooting  
In some shooting conditions, such as when shooting moving points of  
light, the chosen shape may not show, and the brightness may be  
different than expected.  
Detecting a Smile and Shooting  
The camera will shoot even without pressing the shutter button each time it  
detects a smile.  
Choose  
.
Choose  
touch  
in Steps 1 – 2 on p. 54, then  
.
Touch  
, then uch Ú.  
X The will eer shooting  
prep
ch tie the camera detects a smile it  
hooafter the lamp lights.  
hing  
ch  
detection.  
will pause smile detection.  
again to resume smile  
Smile detecon:  
On/Off  
Number of shots, switching  
modes (pp. 61, 62)  
What if a smile is not detected?  
Smiles are easier to detect if the subject faces the camera, and opens their  
mouth enough to show some teeth when smiling.  
Changing the number of shots  
Touch  
the setting.  
, then touch opto choose the number of shots. Touch Úto change  
You should switch to another mode when you finish shooting, or the  
camera will continue taking shots each time the camera detects a smile.  
You can also shoot by pressing the shutter button.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Wink Self-Timer  
Point the camera at the subject and press the shutter button fully. The  
camera will shoot approximately two seconds after it detects a wink.  
Choose  
.
Choose  
touch  
in Steps 1 – 2 on p. 54, then  
.
Touch  
, then touch Ú.  
Compose the shot and press the  
shutter button halfway.  
Touch a face isplayed on the screen to  
choose a pern to wink (Touch AF).  
Press the ser button halfway, and  
that a een frame appears  
arhe face f the person who will  
win
ss the shutter button fully.  
he camera will enter shooting stand-by,  
and [Wink to take picture] will appear on  
the screen.  
Face the camera and wink.  
X The shutter will release approximately 2  
seconds after a wink is detected from the  
person with a frame around the person's  
face.  
To cancel shooting with the timer after  
countdown has started, touch the screen.  
What if a wink is not detected?  
Wink a bit slowly.  
A wink may not be detected if eyes are covered by hair or a hat, or when  
wearing glasses.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Face Self-Timer  
Changing the number of shots  
After touching  
shots. Touch Úto complete the setting.  
on the screen in Step 1, touch opto change the number of  
Shutting both eyes will also be detected as a wink.  
If a wink is not detected, the shutter will release approximately 15  
seconds later.  
If there are no people in the shot when the shutter button is pressed  
fully, the camera will shoot after a person enters the shot and winks.  
Using the Face Self-Timer  
To take a photo that includes the photographer, suh a group photo,  
compose the shot, and press the shutter button. camera will shoot  
approximately two seconds after you e shot nd it detects your face  
(p. 84).  
e  
.
ose  
touch  
in Steps 1 – 2 on p. 54, then  
.
Touch  
, then touch Ú.  
Compose the shot and press the  
shutter button halfway.  
Make sure a green frame appears on the  
face focused on and white frames appear  
on other faces.  
Press the shutter button fully.  
X The camera will enter shooting stand-by,  
and [Look straight at camera to start count  
down] will appear on the screen.  
X The lamp will blink and the self-timer  
sound will play.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Face Self-Timer  
Join the subjects and look at the  
camera.  
X When the camera detects a new face, the  
lamp and sound will speed up (the lamp  
remains lit when the flash will fire), and  
two seconds later the shutter will release.  
To cancel shooting with the timer after  
countdown has started, touch the screen.  
Changing the number of shots  
After touching  
shots, then touch Úto complete the setting.  
in the screen in Step 1, touch opto change the number of  
Even if your face is not detected after ininhe subjects, the shutter will  
release approximately 15 seconds later.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning the Flash Off  
You can shoot with the flash turned off.  
Touch  
.
Choose !.  
Touch !.  
Touch !again to make the setting.  
X Once set, !will ppear on the screen.  
To turn the ash ack on, follow the steps  
above treturn setting to  
.
What if a flashing  
appear
When you press the shutter bay iow light conditions where camera  
shake is likely, a flasng on the screen. Attach the camera to a  
tripod to prevent it fm moving.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Zooming in Closely on Subjects  
(Digital Zoom)  
You can use the digital zoom to zoom up to a maximum equivalent of 20x  
and capture subjects that are too far away for the optical zoom to enlarge.  
The images may appear coarse, however, depending on the recording pixel  
setting (p. 73) and the zoom factor used.  
Move the zoom lever toward i.  
Hold the lever until zooming stops.  
X The zoom will stop when the largest  
possible zoom factor without image  
deterioration has been reached, and the  
zoom factor ll appear when you release  
the zoom lev.  
Motowaiagain.  
X Tal zoom will zoom in even further  
on subject.  
What if thzoom factor appears in blue?  
Images shot at zoom factors that appear in blue will be coarse.  
Turning off the digital zoom  
To turn off the digital zoom, touch ø, then touch nto choose the 4  
tab, and choose [Digital Zoom] and the [Off] option.  
The focal length when using the optical zoom is 24 – 120 mm, and the  
focal length when using the digital zoom is 120 – 480 mm (35mm film  
equivalent).  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Zooming in Closely on Subjects (Digital Zoom)  
Digital Tele-Converter  
The focal length of the lens can be increased by an equivalent of 1.7x or  
2.1x. This enables a faster shutter speed and less chance of camera shake  
than the zoom (including digital zoom) used by itself at the same zoom  
factor.  
The images may appear coarse, however, depending on the combination of  
recording pixel (p. 73) and digital tele-converter settings used.  
Choose [Digital Zoom].  
Touch ø, then touch n.  
Touch the 4tab.  
Drag vertically uor down the screen to  
choose [Digal Zom].  
Accepsettg.  
Touco choosa zoom factor.  
uchiÚrestores the settings screen.  
iew will be enlarged and the zoom  
will appear on the screen.  
return to standard digital zoom, choose  
[Digital Zoom] and the [Standard] option.  
What if the zoom factor appears in blue?  
Using [1.7x] at a recording pixel setting of  
deterioration (the zoom factor will appear in blue).  
Using [2.1x] at a recording pixel setting of  
deterioration (the zoom factor will appear in blue).  
or  
will cause image  
or will cause image  
,
The respective equivalent focal lengths when using [1.7x] and [2.1x] are  
40.8 – 204 mm and 50.4 – 252 mm (35mm film equivalent).  
The digital tele-converter cannot be used together with the digital zoom.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Inserting the Date and Time  
You can insert the shooting date and time in the lower right corner of an  
image. Once inserted, however, they cannot be deleted. Be sure to check  
beforehand that the date and time are correctly set (p. 143).  
Choose [Date Stamp].  
Touch ø, then touch n.  
Touch the 4tab.  
Drag vertically up or down the screen to  
choose [Date Stamp].  
Accept the setting.  
Touch qrto choose [Date] or [Date &  
Time].  
Touching stores the settings screen.  
X t, [DAE] will appear on the  
s
oo
e shooting date or time will be recorded  
the image’s lower right corner.  
To restore to the original setting, choose  
[Off] in Step 2.  
You can insert and print the shooting date in images which do not have  
an embedded date and time as follows. However, if you do this for  
images with an embedded date and time, the date and time will be  
printed twice.  
Use the DPOF print settings (p. 133) to print.  
Use the included software to print.  
Refer to the Software Guide for details.  
Print using printer functions.  
Refer to the Personal Printing Guide for details.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Self-Timer  
The self-timer can be used to shoot a group photo that includes the  
photographer. The camera will activate approximately 10 seconds after the  
shutter button is pressed.  
Touch  
.
Choose Ò.  
Touch Ò.  
Touch Òagain make the setting.  
X Once set, Òppear on the screen.  
oot.  
s thshutter button halfway to focus  
e subject, then press it fully.  
n the self-timer starts, the lamp blinks  
and the self-timer sound plays.  
X Two seconds before the shutter releases,  
the lamp and sound speed up (the lamp  
remains lit when the flash will fire).  
To cancel shooting with the timer after  
countdown has started, touch the screen.  
To restore the original setting, choose  
in Step 2.  
You can change the delay time and number of shots (p. 81).  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4
In this chapter you will learn hoe the rious functions in G  
mode to progressively ace yshooting skills.  
This chapter assumes that the mode switch is set to 4and the camera is  
in Gmode.  
Gstands for Program AE.  
Before attempting to shoot using a function explained in this chapter in  
modes other than Gmode, check if the function is available in those  
modes (pp. 164 – 165).  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in Program AE  
You can choose the settings for various functions to suit your preferences.  
AE stands for Auto Exposure.  
Set the mode switch to 4(p. 42).  
Choose G.  
Choose Gin Step 2 on p. 54.  
Adjust the settings according to  
your purposes (pp. 71 – 81).  
Shoot.  
What if the shutter speed arture lue appear in  
orange?  
If a correct exposure cannot bwhn pressing the shutter button  
halfway, the shutter sand alue are shown in orange. Try the  
following settings to btain the cposure.  
Turn on the flash (71)  
Choose a higher ISO peed p. 75)  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting the Brightness  
(Exposure Compensation)  
You can adjust the standard exposure set by the camera in 1/3-stop  
increments in the range of –2 to +2.  
Enter Exposure Compensation  
mode.  
Touch #.  
Adjust the brightness.  
While watchithe screen, touch the point  
on the Exse Compensation bar where  
ynt to mke a setting, or drag  
hally to aust the brightness, then  
touÚ.  
Exposure  
he xposure compensation amount will  
Compensation Bar  
pear on the screen.  
Turning the Flash On  
You can make the flash fire every time you shoot. At maximum wide angle,  
the flash range is approximately 50 cm – 3.5 m (1.6 – 11 ft.), and at  
maximum telephoto, it is 90 cm – 2.0 m (3.0 – 6.6 ft.).  
Choose h.  
Touch  
, then touch h.  
Touch hagain to make the setting.  
X Once set, hwill appear on the screen.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Changing the Focus Range  
(Macro/Infinity)  
When it is difficult to focus because your shot contains subjects that are both  
near and far, you can change the focus range (the distance range from your  
subject) to focus more reliably.  
Choose a Focus Range.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Choose the option you want to set.  
Touch the option once more to complete  
the setting.  
Shooting Range  
escription  
e
5 – 50 cm* (2 in. – 1.6 ft.)  
Oes on cle subjects.  
u
More than 3 m (More thaOnly cuses on far-away subjects.  
* When the zoom lever is moved nd hd until the lens stops moving, which  
is the maximum wide ngle settins.  
The edges of e image may darken if the flash fires in macro shooting.  
For macro shooting, ewill turn gray in the area that displays in the  
yellow bar underneath the zoom bar, and the camera will not focus.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Changing the Recording Pixel Setting  
(Image Size)  
You can choose from six recording pixels (image size) settings.  
Choose the recording pixel setting.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch an item you want to set.  
If you drag vertically up or down the menu  
to the right, other items will appear.  
Touch the iteyou chose again to  
completthe etting.  
X The etting chose will appear on the  
If you choose  
, yot uDigital Zoom (p. 65) or Digital Tele-  
Converter (p. 66).  
Changinthe Compression Ratio  
(Image Quality)  
You can choose from the following two levels of compression ratio (image  
quality):  
(Fine),  
(Normal).  
Choose the compression ratio  
setting.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch an item you want to set.  
Touch the item you chose again to  
complete the setting.  
X The setting you chose will appear on the  
screen.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Changing the Compression Ratio (Image Quality)  
Approximate Values for Recording Pixels and Compression  
Ratio  
Number of Recordable  
Compression Single Image Data  
Images  
Recording Pixels  
Ratio  
Size (Approx. KB)  
4 GB  
1058  
2194  
1652  
3352  
2681  
5247  
6352  
12069  
20116  
30174  
1403  
2873  
16 GB  
3597  
1719  
2302  
1100  
1395  
695  
4334  
8985  
(Large)  
14M/4320 x 3240  
6769  
(Medium 1)  
9M/3456 x 2592  
13727  
10981  
21486  
26010  
49420  
82367  
123550  
5746  
(Medium 2)  
5M/2592 x 1944  
558  
(Medium 3)  
2M/1600 x 1200  
278  
(Small)  
0.3M/640 x 480  
0  
12
(Widescreen)  
4320 x 2432  
11766  
The values in the tabare measuding to Canon standards and may change  
depending on the suct, memory cand camera settings.  
Approximate Vales r Paper Size  
Suitable for sending images as e-mail  
attachments.  
For printing on wide size paper.  
A2  
A3  
A4, Letter size  
5" x 7"  
Postcard size  
3.5" x 5"  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Changing the ISO Speed  
Choose the ISO speed.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch an item you want to set.  
If you drag vertically up or down the menu  
to the right, other items will appear.  
Touch the item you chose again to  
complete the setting.  
X The setting you chose will appear on the  
screen.  
Automatically adjusts the ISO speeo tShooting mode and shooting  
conditions.  
Low  
Fine weather conddoor shting.  
Cloudy, T
Nightscnters  
High  
Changinthe ISO s
Lowering the ISO peeesults in sharper images, but there may be an  
increased chance of image blurring in certain shooting conditions.  
Raising the ISO speed results in a faster shutter speed, reducing camera  
shake and letting the flash reach greater distances to the subject. The images,  
however, will appear coarse.  
When the camera is set to  
, you can press the shutter button  
halfway to display the automatically set ISO speed.  
If you set the camera to  
(p. 55), ISO speeds will automatically be  
set higher than in Amode, depending on the scene.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Adjusting the White Balance  
The white balance (WB) function sets the optimal white balance for natural  
looking colors to match the shooting conditions.  
Choose the white balance function.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch an item you want to set.  
If you drag vertically up or down the menu  
to the right, other items will appear.  
Touch the item yu chose again to  
complete the seng.  
X The setting yoose will appear on the  
scr
Automatically he owhite balance for the shooting  
conditions.  
Auto  
Day Light  
Cloudy  
Fineathe, outoor shooting  
oudy, shadyconditions  
Tungsten  
Tgsten, lb-type (3-wavelength) fluorescent lighting  
Warwhfluorescent, cool-white fluorescent, warm-white-type  
(3-wavelength) fluorescent lighting  
Fluorescent  
Daylight fluorescent, daylight-type (3-wavelength) fluorescent  
lighting  
Fluorescent H  
Custom  
Manually sets a custom white balance.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Adjusting the White Balance  
Custom White Balance  
You can adjust the white balance to the light source at the shooting location.  
Make sure that you set the white balance under the light source of the actual  
scene you will shoot.  
In Step 2 on p. 76, choose  
.
Make sure the entire screen is filled with a  
plain, white colored subject, then touch  
on the right.  
X The tint on the screen will change when a  
white balance data is set.  
If you change camera settings after recordg white balance data, the  
tone may not turn out properly.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Continuous Shooting  
You can shoot continuously at a maximum speed of approximately 0.7  
images/second while the shutter button is pressed fully and held.  
Choose a Drive mode.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch W.  
Touch Wagain to make the setting.  
X Once set, Wwill appear on the screen.  
Shoot.  
X As long as yhd the shutter button  
dowcamerwill shoot successive  
imag
Cannot be used with ter (p. 68, 80, 81) or  
Continuous shting sases n (p. 55).  
(pp. 60 – 62).  
For a certainterval, imy not be recorded, and the shooting  
speed for mslow down deending on the shooting conditions and the  
camera settins.  
For continuous sing, the focus and exposure are locked when the  
shutter button is pressed halfway.  
As the number of images increases, the shooting speed may slow  
down.  
If the flash fires, the shooting speed may slow down.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the Tone of an Image  
(My Colors)  
You can change the tone of an image to sepia or black and white when shooting.  
Choose My Colors.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch an item you want to set.  
If you drag vertically up or down the menu  
to the right, other items will appear.  
Touch the iteyou chose again to  
completthe etting.  
X The etting chose will appear on the  
My Colors Off  
Vivid  
Eme corast and color saturation for a vivid  
imp
Tones e contrast and color saturation for neutral  
hues.  
Neutral  
Sepia  
B/W  
Sea tones.  
Black and white.  
Combines the effects of Vivid Red, Vivid Green and Vivid  
Blue to produce intense natural appearing colors like those  
obtained with positive film.  
Positive Film  
Lighter Skin Tone Makes skin tones lighter.  
Darker Skin Tone Makes skin tones darker.  
Emphasizes blue tints. Makes the sky, ocean and other blue  
subjects more vivid.  
Vivid Blue  
Emphasizes green tints. Makes mountains, foliage and other  
green subjects more vivid.  
Vivid Green  
Vivid Red  
Emphasizes red tints. Makes red subjects more vivid.  
You can adjust contrast, sharpness, and color saturation etc.  
to your preference (p. 80).  
Custom Color  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Shooting Using the Two Second Self-Timer  
The white balance cannot be set in the  
and  
modes (p. 76).  
In  
and  
modes, colors other than people’s skin color may  
change. You may not obtain the expected results with some skin colors.  
Custom Color  
The contrast, sharpness, color saturation, red, green, blue, and skin tones in  
an image can be chosen and set at 5 different levels.  
Follow Step 2 on p. 79 to choose  
.
Touch on the right side of the screen.  
Touch to chse an item, then touch  
the the bawhere you want to  
ake ting.  
moto the right, the stronger/  
er/darker (skin tone) the effect gets,  
ore to the left, the weaker/lighter/  
fairer (skin tone) the effect gets.  
Touch Úto make the setting.  
Shooting Using the Two Second Self-  
Timer  
The camera will shoot approximately two seconds after the shutter button is  
pressed, avoiding any camera shake that occurs when pressing the shutter  
button.  
Choose Î.  
Touch  
, then touch Î.  
Touch Îagain to make the setting.  
X Once set, Îwill appear on the screen.  
Follow Step 3 on p. 68 to shoot.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Customizing the Self-Timer  
You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10  
shots).  
Choose $.  
Touch  
and $, then immediately touch  
[Settings].  
Choose the settings.  
Touch qrto choose a value for the  
desired option.  
Touch Úto ake the setting.  
Follow Sten p. 68 to shoot.  
What if the number of shoset to to or more shots?  
Exposure and white balas aset with the first shot.  
When you set te tie dee than 2 seconds, the self-timer lamp and  
sound speed u2 seconds he shutter releases (when the flash will fire,  
the lamp lights)
If the flash firhe shooting interval may be longer.  
If you set a high number of shots, the shooting interval may be longer.  
If the memory card becomes full, shooting stops automatically.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the Composition with the  
Focus Lock  
While you keep the shutter button pressed halfway, the focus and exposure  
are locked. You can now recompose and shoot. This is called Focus Lock.  
Focus.  
Center the subject you want in focus, and  
press the shutter button halfway.  
Confirm that the AF Frame is green.  
Recompose.  
Keep the shutter button pressed halfway  
and recompose e scene.  
Shoot.  
Presutter bton fully.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
Getting More Out of Your  
Camera  
This chapter serves as the adversion f Chapter 4 and  
explains how to take pusinvarious functions.  
This chapter assumes that the mode switch is set to 4and the camera is  
in Gmode.  
The sections “Shooting Long Exposures” (p. 94) and “Changing the Color  
and Shooting” (p. 95) assume you have set the mode switch to 4and  
chosen the corresponding mode.  
Before attempting to shoot using a function explained in this chapter in  
modes other than Gmode, check if the function is available in those  
modes (pp. 164 – 167).  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the AF Frame Mode  
You can change the AF (Auto Focus) frame mode to match the conditions  
you want to shoot.  
Choose [AF Frame].  
Touch ø, then nto choose the  
4tab. Touch [AF Frame], then touch qr  
to choose an option.  
Face AiAF  
Detects people’s faces and sets the focus, exposure (evaluative metering  
only) and white balance (  
only).  
When the camera is pointed at subjects, a we ame appears on the  
face the camera judges to be the maject, ad gray frames (max. 2)  
will appear on other faces.  
A frame will follow a detecte thamoving within a certain range.  
When the shutter button is halfay, up to 9 green frames will  
appear on faces oich a focuses. If a face is not detected  
when Servo AF iset to [On]frame will appear in the center of the  
screen.  
If a face is not dd and only gray frames (no white frame) appear,  
up to 9 green frames will appear on the areas the camera focuses on  
when the shutter button is pressed halfway.  
Examples of faces that cannot be detected:  
Subjects that are far away or extremely close.  
Subjects that are dark or light.  
Faces turned to the side or at a diagonal, or faces with a portion hidden.  
The camera may mistakenly identify non-human subjects as a face.  
If the camera cannot focus when you press the shutter button halfway,  
the AF frame will not appear.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Magnifying the Focal Point  
Fixed frame  
A single AF frame will be used. This is effective for focusing on a specific  
point.  
You can reduce the AF frame size  
Touch ø, then nto choose the 4tab, then touch [AF Frame Size]  
and choose [Small].  
The setting is configured to [Normal] when the Digital Zoom (p. 65) or Digital  
Tele-converter (p. 66) is used.  
If the camera cannot focus when you press the shutter button halfway,  
the AF frame will turn yellow and  
will appear.  
Magnifying the Focal Poi
If you press the shutter button halfwAF frae will magnify and you  
can check the focus.  
oose [AF-Point Zoom].  
Touch ø, then nto choose the  
4tab. Touch [AF-Point Zoom], then  
touch qrto choose [On].  
Check the focus.  
Press the shutter button halfway.  
X In [Face AiAF], the face detected as the  
main subject will appear magnified.  
X In [Fixed frame] (p. 85), the contents of  
the AF frame will appear magnified.  
What if the display does not magnify?  
The display will not appear magnified in [Face AiAF] (p. 84) if a face cannot be  
detected or is too big in relation to the screen. In [Fixed frame], it will not appear  
magnified if the camera cannot focus.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Choosing the Subject to Focus On (Touch AF)  
The magnified display will not appear when using Digital Zoom (p. 65),  
Digital Tele-converter (p. 66) or Servo AF (p. 88).  
Choosing the Subject to Focus On  
(Touch AF)  
You can choose a specific subject or person's face, or a location on the  
screen, to focus on and shoot.  
Choose the subject, face or  
location to focus on.  
Touch the subjeor person shown on the  
screen.  
X WheF frame mode is set to [Face  
F], camera will beep and display  
het detects the subject. The  
ra will continue to focus even if the  
ect moves.  
If the camera does not detect the subject,  
however,  
will blink for a few seconds  
and then disappear. The camera will  
return to the normal shooting screen if it  
cannot detect the subject to continue  
focusing on.  
X When the AF frame mode is set to [Fixed  
frame], an AF frame will appear at the  
location where you touch the screen.  
To cancel, touch Ú.  
Shoot.  
Press the shutter button halfway. The  
frame where the camera focused will  
change into a green  
.
Press the shutter button fully to shoot.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting with the AF Lock  
The camera may not be able to track the subject if the subject is too  
small, moves too quickly or if the contrast between the subject and the  
background is too low.  
When shooting in eor u(p. 72) with the AF frame mode set to [Face  
AiAF], choosing a location to focus on returns the camera to  
.
A border appeared around the screen when it was touched  
Touch operations on faces or subjects appearing outside the border will not  
work. They will work if the face or subject move inside the border.  
Shooting with the AF Lock  
The focus can be locked. After locking the focuthe focal distance will not  
change even when you release your finger fhe shutter button.  
Loce focus.  
eep he shutter button pressed halfway,  
d touch the center of the screen.  
he focus locks and %appears on the  
screen.  
If you release your finger from the shutter  
button and touch the screen again, AF  
lock will cancel, and %will disappear.  
Compose the scene and shoot.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting with Servo AF  
While the shutter button is pressed halfway, the focus and exposure will  
continue to adjust, allowing you to take pictures of moving subjects without  
missing a shot.  
Choose [Servo AF].  
Touch ø, then nand choose  
the 4tab and touch [Servo AF], then  
touch qrto choose [On].  
Focus.  
The focus and exposure will be  
maintained where the blue AF frame  
appears while yopress the shutter  
button halfwa
The camera may not be able to some cnditions.  
If a correct exposure cabe od, the shutter speed and  
aperture value appear . Rase your finger from the shutter  
button, then press it ay.  
In low light nditions, Amay not turn blue even after pressing  
the shutter tton halfway. his case, the focus and exposure are  
locked.  
The [AF-Point Zoption in the 4tab is not available in Servo AF  
mode.  
Not available when using Self-Timer (pp. 68, 80, 81).  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the Metering Mode  
You can change the Metering mode (brightness measuring function) to  
match the shooting conditions.  
Choose the Metering mode.  
Touch ø, then drag vertically up or  
down the menu on the left to choose  
.
Choose an option.  
Touch an item you want to set.  
Touch the item you chose again to  
complete the setting.  
X The setting wil appear on the screen.  
Suitable for standard shoocoditions, including back lit shots.  
Automatically adjusts e expoto match the shooting  
conditions.  
Evaluative  
Center  
Averages the light from the ntire frame, but gives  
Weighted Avg. greater the nter.  
Only mthe  
(Spot AE Point frame) that appears at  
Spot  
thcenteen. When the AF frame mode is set to [Fixed  
frame], thE Point frame will be linked to the AF frame.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting with the AE Lock  
You can lock the exposure and shoot, or set the focus and exposure  
separately to shoot. AE stands for “Auto Exposure”  
Lock the exposure.  
Point the camera toward the subject and  
touch the bottom part of the screen (inside  
the frame shown on the left) while  
pressing the shutter button halfway.  
X When &appears, the exposure will be  
locked.  
If you release your finger from the shutter  
button and touch he screen again, &will  
cancel, and &l disappear.  
Compthe sene and shoot.  
Shooting with tE Lock  
Just as with the AE ck (aboven lock the exposure for shooting with  
the flash. FE stands or “Flash Exposure”.  
Choose h(p. 71).  
Lock the flash exposure.  
Point the camera toward the subject and  
touch the bottom part of the screen (inside  
the frame shown on the left) while  
pressing the shutter button halfway.  
X The flash will fire and when (appears,  
the flash output will be retained.  
If you release your finger from the shutter  
button and touch the screen again, (will  
disappear.  
Compose the scene and shoot.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Correcting the Brightness and Shooting  
(i-Contrast)  
The camera can detect areas in the scene, such as faces or backgrounds,  
that are too bright or dark and automatically adjust them to the optimum  
brightness when shooting. Also, when the overall image is lacking in  
contrast, the camera will automatically correct the image for a sharper  
impression when shooting.  
Choose [i-Contrast].  
Touch ø, then nto choose the  
4tab. Touch [i-Contrast], then touch qr  
to choose [Auto].  
X Once se@ill appear on the screen.  
Under soe conditionsage may appear coarse or may not be  
corrected operly.  
You can correct recorded images (p. 129).  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Red-Eye Correction  
You can automatically correct red-eye that occurs in images taken with the flash.  
Choose [Flash Settings].  
Touch ø, then nand choose  
the 4tab and touch [Flash Settings].  
Adjust the setting.  
Touch [Red-Eye Corr.], then touch qrto  
choose [On].  
X Once set, Œwill appear on the screen.  
Red-eye correction may be applieeas otthan red eyes. For  
example, when red make-up has ed aroueyes.  
You can correct record(p. 30).  
Checking or Shut Eyes  
When the camera detects the possibility that people have their eyes shut,  
appears.  
Choose [Blink Detection].  
Touch ø, then nto choose the  
4tab. Touch [Blink Detection], then  
touch qrto choose [On].  
Shoot.  
X When a person with shut eyes is detected,  
a frame and  
appear.  
In  
or $mode, when the number of shots is set to two or more  
shots, this function is only available for the last image shot.  
Not available in Wmode.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting with Slow Synchro  
You can make the main subject, such as people, appear bright by having the  
camera provide the appropriate illumination with the flash. At the same time,  
you can use a slow shutter speed to brighten the background that the light  
from the flash cannot reach.  
Choose .  
Touch  
, then touch .  
Touch again to make the setting.  
X Once set, will appear on the screen.  
Shoot.  
Even if the flah fires, ensure that the  
subject does ot move until the shutter  
sound end
Attach the camera to a tripod nt the cera from moving and  
blurring the image. Yuld e [IS Mode] to [Off] when shooting  
with a tripod (p. 147
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting Long Exposures  
You can set the shutter speed to a range between 1 and 15 seconds to  
shoot long exposures. However, you should attach the camera to a tripod to  
prevent the camera from moving and blurring the image.  
Choose .  
Choose in Steps 1 – 2 on p. 54.  
Choose the shutter speed.  
Touch  
.
Touch the point on the bar where you  
want to make a setting, or drag  
horizontally to choose a shutter speed,  
then touch Ú.  
Confirm he exosure.  
Wheress thshutter button  
lfwae exposure for the chosen  
ter eed will appear on the screen.  
The brightns of the imdiffer from the brightness of the  
screen in Stp 3 when the tter button was pressed halfway.  
When shutter peeds f 1.3 seconds or slower are used, images are  
processed to elie noise after being taken. A certain amount of  
processing time may be needed before you can take the next shot.  
You should set the [IS Mode] to [Off] when shooting with a tripod  
(p. 147).  
If the flash fires, the image may be overexposed. If this happens, set the  
flash to !and shoot.  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing the Color and Shooting  
You can change the look of an image when shooting. However, depending  
on shooting conditions the image may become coarse, or the colors may not  
come out as expected.  
Color Accent  
You can choose to retain a single color and change the rest to black and  
white in a composition.  
Choose T.  
Follow Steps 1 – 2 on p. 54 to choose T.  
Touch  
.
X The uncngd image and the Color  
Act imagill both display.  
r for dault settings is green.  
ecifthe color.  
osition the center frame so it is filled with  
the color you want and touch the frame at  
the bottom part of the screen.  
X The specified color will be recorded.  
Specify the range of colors.  
Recorded color  
Touch opto change the range of colors  
to be retained.  
Choose a negative value to limit the range  
of colors. Choose a positive value to  
extend the range of colors to similar  
colors.  
Touching Úrestores the shooting screen.  
Using the flash may cause unexpected results in this mode.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the Color and Shooting  
Color Swap  
You can swap one color in an image for another when recording it. You can  
only swap one color.  
Choose Y.  
Follow Steps 1 – 2 on p. 54 to choose Y.  
Touch  
.
X The unchanged image and the Color  
Swap image will both display.  
The default setting is to change green to  
gray.  
Specify the olr to be swapped.  
Poscenteframe so it is filled with  
the cu want d touch the frame at  
bom left of the screen.  
spefied color will be recorded.  
fy the target color.  
Position the center frame so it is filled with  
the color you want and touch the frame at  
the bottom right of the screen.  
X The specified color will be recorded.  
Specify the range of colors to be  
swapped.  
Touch opto change the range of colors  
to be retained.  
Choose a negative value to limit the range  
of colors. Choose a positive value to  
extend the range of colors to similar colors.  
Touching Úrestores the shooting screen.  
Using the flash may cause unexpected results in this mode.  
Under some conditions, the image may appear coarse.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Using Various Functions for  
Shooting Movies  
This chapter provides more advanced ination than the “Shooting  
Movies” and “Viewing Movies” s of Capter 1.  
This chapter assumes that the mode switch is set to E.  
Press the 1button to enter Playback mode before playing back or  
editing movies.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the Movie Mode  
You can choose between three Movie modes.  
Set the mode switch to E.  
Choose a Movie mode.  
Touch E, then touch the desired mode.  
Touch the screen again to make the  
setting.  
E
>
Standard  
Normal
These des t you change all colors except the  
chsen k and white, or exchange the chosen  
color for aolor, when shooting. See “Changing the  
Color ad Shooting” (p. 95) for details.  
Color Accent  
z
Color Swap  
Under some conditions, colors may not turn out as expected in >and z  
modes.  
Changing the Image Quality  
You can choose between three image quality settings.  
Choose the image quality setting.  
Touch ø, then drag vertically up or  
down the menu to the left to choose  
.
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Changing the Image Quality  
Choose an option.  
Touch an item you want to set.  
Touch the item you chose again to  
complete the setting.  
X The setting will appear on the screen.  
Image Quality Table  
Image Quality  
(Recording Pixels/Frame Rate)  
Content  
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.  
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.  
Since the numr of recording pixels is smaller,  
the imagquawill appear coarse when  
320 x 240 pixels, 30 frames/sec.  
compared w
, but you can record three  
tlength
Estimated Shooting
Shooting Time  
Image Quay  
4 GB  
16 GB  
21 min. 23 sec.  
1 hr. 27 min. 37 sec.  
46 min. 46 sec.  
3 hrs. 11 min. 32 sec.  
9 hrs. 48 min. 19 sec.  
2 hrs. 23 min. 41 sec.  
Based on Canon’s testing standards.  
Recording will automatically stop when the clip file size reaches 4 GB, or when the  
recording time reaches 10 min. when shooting in , and approximately 1 hour when  
shooting in or  
.
Recording may stop even if the maximum clip length has not been reached on some  
memory cards. SD Speed Class 4 or higher memory cards are recommended.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
AE Lock/Exposure Shift  
You can lock the exposure or change it in 1/3 steps within a range of ±2  
before shooting.  
Focus.  
Press the shutter button halfway to focus.  
Lock the exposure.  
After releasing the shutter button, touch  
bto lock the exposure. The exposure  
shift bar appears.  
Touch Úto release the lock.  
Change the exosure.  
While watchintscreen, touch qrto  
adjurightns.  
hoot.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Other Shooting Functions  
The following functions can be used in the same way as for still images.  
Functions marked with a * can be used in the same way as for still images  
when in >or z.  
Zooming in Closely on Subjects (Digital Zoom) (p. 65)  
You can use the digital zoom while shooting, but the optical zoom cannot be  
used.  
If you want to shoot at the maximum zoom factor, you should adjust the optical  
zoom to the maximum before shooting.  
The sound of the zoom will be recorded.  
Using the Self-Timer (p. 68)*  
Changing the Focus Range (Macro/Infinity) (p. 72)*  
Adjusting the White Balance (p. 76)  
Changing the Tone of an Image (My Colors) (p. 79)  
Shooting Using the Two Second Self-Timer (80)*  
Shooting with the AF Lock (p. 87)  
Turning off the AF Assist Beam (p*  
Displaying the Overlay (p. 147)*  
[3:2 Guide] is not available.  
Changing the IS-Mode Sp. 1)*  
You can switch beeen [] an[Off].  
Changing Icon Order (Ico) (p. 148)*  
bcannot be med.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playback Functions  
The following functions can be used in the same way as for still images.  
Erasing Images (p. 30)  
Quickly Searching Images (p. 106)  
Viewing Images in Filtered Playback (p. 108)  
Viewing Slideshows (p. 109)  
Changing Image Transitions (p. 112)  
Easy Operations with Touch Actions (p. 113)  
Smart shuffle cannot be called up.  
Viewing Images on a TV (p. 114)  
Viewing Images on a High-Definition TV (p. 116)  
Protecting Images (p. 118)  
Erasing All Images (p. 120)  
Organizing Images by Category (My Category) (p122)  
Tagging Images as Favorites (p. 123)  
Rotating Images (p. 125)  
Summary of Movie Control Pa“Viewig Movies” (p. 33)  
Exit  
Touch to disay the volthen touch op to adjust the volume.  
When the vme is set to
ill appear.  
Playback  
Display the first f
Previous frame (Slow rewind if you touch and hold the icon.)  
Next frame (Slow advance if you touch and hold the icon.)  
Display the last frame  
Edit (p. 103)  
Touch the scroll bar, or drag it horizontally to change the displayed  
frame.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing  
You can trim the beginnings and ends of recorded movies in one-second  
increments.  
Set the editing range.  
Touch the screen during movie playback  
to display the movie control panel.  
Touch  
,
or the scroll bar to change  
the displayed frame (frames are the basic  
units that make up a movie).  
X
will change to  
at one-second  
intervals in movies.  
Touch  
or  
.
X [Delete seof movie] will appear on  
en.  
Eou touc
when it appears,  
onlhe portion from the nearest  
e lewill be trimmed when [Cut  
to  
eginning] is chosen. Only the portion  
rom the nearest to the right will be  
trimmed when [Cut End] is chosen.  
Choose a portion to delete.  
Touch [Cut Beginning] or [Cut End].  
When [Cut Beginning] is chosen, the  
portion from the nearest  
to the left of  
the currently displayed scene will be  
deleted in approximately one-second  
increments.  
When [Cut End] is chosen, the portion  
from the nearest  
to the right of the  
currently displayed scene will be deleted  
in approximately one-second increments.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing  
Save the edited movie.  
Touch [New File].  
X The movie will be saved as a new file.  
To cancel editing, touch [Cancel].  
To reset the editing range, touch Ú.  
When [Overwrite] is chosen in Step 4, the unedited movie is overwritten  
with the edited movie, erasing the original.  
When there is not enough space left on the memory card, only  
[Overwrite] can be chosen.  
If the battery is depleted partway through editing, the edited movie clips  
may not be saved. When editing movies, you should use a fully charged  
battery or the separately sold AC adapter kit (p. 152).  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Using Various Playback and  
Editing Functions  
This chapter explains various ways to plack and edit images.  
Press the 1button to entPlayode before operating the camera.  
It may not be possbacor edit images that have been edited  
on a comutehad ame changed, or have been taken on a  
differenamera.  
The edit nction (p. 126 – 130) cannot be used if the memory card  
does not he frespace available.  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Quickly Searching Images  
Searching Images Using Index Display  
Displaying multiple images at a time lets you quickly find the image you  
want.  
Display images in an index.  
Double tap the screen to display images in  
an index.  
The number of images increases each  
time you double tap the screen.  
You can also move the zoom lever toward  
gto display imges in an index. Move  
the zoom levtard kto reduce the  
nummage
Switch displayed images.  
u dg vertically up or down the  
n, images will switch with the  
ment of your finger.  
Choose an image.  
Touching an image will display that image  
by itself.  
You can also drag across the screen  
horizontally to move the orange frame,  
then move the zoom lever toward kto  
display an image by itself.  
Since the camera uses a pressure sensitive touch panel, if the Index  
Display does not change as expected when you double tap the screen,  
try double tapping slightly harder or use the toggle attached to the strap  
to easily switch the display (p. 14).  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Quickly Searching Images  
Searching Images by Scrolling  
Dragging across the screen will display images in a line letting you quickly  
search them. You can also jump by shooting date (Scroll Display).  
Choose an image.  
You can switch between images in single  
image playback by dragging horizontally  
across the screen.  
Continuously dragging quickly across the  
screen will display the screen on the left  
(Scroll Display).  
In this displaydrag horizontally across  
the screen to hoose images.  
Touching tnter image restores single  
laybac
WScroll Dplay, if you quickly drag  
verally, you can search images by the  
hootg date.  
To turn ofhis effect, toøthen touch nto choose the 1tab.  
Choose [Soll Dispay] and the [Off] option.  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing Images in Filtered Playback  
When there are many images on the memory card, you can filter and display  
them by a specified filter. You can also protect (p. 118) or delete (p. 120) all  
filtered images at once.  
Choose .  
Touch ø, then drag vertically up or  
down the menu to the left to choose .  
Choose a filter.  
Touch an item you want to set.  
If you drag vertically up or down the menu  
to the right, other items will appear.  
Touch the item yu chose again to  
complete the tg.  
View tered mages.  
uch desired filter, then touch it  
n (ecept for  
).  
ed playback starts and a yellow  
e appears.  
If you drag horizontally across the screen,  
only the chosen target images will display.  
If you choose  
in Step 2, filtered  
playback will be canceled.  
Search filters  
Favorites  
Shot Date  
Displays images tagged as favorites (p. 123).  
Displays the images shot on a specified date  
Displays the images of a specified category (p. 122)  
Displays only still images or movies  
;
My Category  
File Type  
What if you can’t choose a filter?  
Filters that do not contain any images cannot be chosen.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing Slideshows  
Filtered Playback  
You can filter images during a slideshow (p. 109) so that only certain images will  
play back. You can also use the following functions in filtered playback for  
processing all the filtered images at once.  
“Protecting Images” (p. 118), “Erasing All Images” (p. 120), “Printing from the Print  
List (DPOF)” (p. 133)  
Viewing Slideshows  
You can automatically play back images recorded to a memory card. Each  
image displays for approximately 3 seconds.  
Start the lidshow.  
Dshow
e slideshow will start a few seconds  
fter [Loading image…] displays.  
In filtered playback (p. 108), only images  
matching a filter play back.  
Touch the screen to stop the slideshow.  
The power saving function does not work during slideshows (p. 52).  
You can also start a slideshow by choosing .from the FUNC. menu,  
then touching a transition effect in the menu on the right.  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing Slideshows  
Changing Settings  
You can set a slideshow to repeat, or change transition effects and the time  
that slideshow images are displayed. You can choose from six transition  
effects when switching between images.  
Choose [Slideshow].  
Touch ø, then nto choose the  
1tab, and touch [Slideshow].  
Make the setting.  
Touch an item, then touch qrto make  
the setting.  
If you touch Sta, the slideshow starts  
with your settin
Toue screduring playback will  
restomenu sceen.  
You cannot change [Pl[Bule] is chosen in [Effect].  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the Focus  
You can magnify the area of a recorded image that was inside the AF  
Frame, or the area of a face that was detected, to check the focus.  
Touch lto switch the focus  
check display (p. 43).  
X A white frame will appear where the AF  
frame or face was when the focus was  
set.  
X A gray frame will appear on a face  
detected during playback.  
X The area within the orange frame appears  
magnified.  
Switch fra.  
e zoom ever toward konce.  
X Ten shown to the left will appear.  
Tou
to move to a different frame  
hen ultiple frames appear.  
ange the magnification level or  
location.  
Moving the zoom lever, or touching the  
magnified image at the bottom right of the  
screen, or  
will change the  
displayed magnification rate.  
If you drag across the image on the lower  
right, you can move the location of the  
displayed area.  
Touching Ú, or the image in the upper left  
resets the display to Step 1.  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Magnifying Images  
Magnify an image.  
When you touch the screen, the image will  
magnify and and will appear.  
If you keep your finger on the screen, the  
display will continue to zoom on that part  
of the image up to a factor of 10x.  
You can also zoom in or out on images by  
touching  
or  
.
If you touch and hold  
or  
, the  
display will continue zoom in or out on the  
image.  
If you drag acrosthe screen, you can  
move the loatioof the displayed area.  
Touch Úto ree the image to its  
orig.  
ApproximateLocation  
of Displayed Area  
You co tap the side of the camera  
tly (29) to switch between images at  
ame oom factor (Active Display).  
If you move tzoom lever d k, the display will zoom in on the  
image and, if yu contie to hold the zoom lever, it will continue to zoom  
in up to a maximm faor of 10x. To zoom out, move the zoom lever  
toward g, or continue to hold it to return to single image playback.  
Changing Image Transitions  
You can choose from three transition effects when switching between  
images in Single Image Playback.  
Choose [Transition].  
Touch ø, then nto choose the  
1tab. Touch [Transition], then touch qr  
to choose an option.  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Easy Operations with Touch Actions  
In single image playback, you can quickly and easily call up functions that  
have been registered to each of four set dragging patterns (Touch Actions).  
Use a Function Registered to  
Drag across the screen as shown.  
X The function registered to  
will be  
called up.  
By dragging across the screen as shown,  
you can also call up the functions  
registered to  
,
and  
.
You can ce the functions registered  
th Actios.  
Changing Touch ns Registered Functions  
You can registehe functions you want to use easily to each of the drag  
patterns.  
Choose [Set Touch Actions].  
Touch ø, then nto choose the  
1tab, and touch [Set Touch Actions].  
Register a function to a drag  
pattern.  
Drag vertically up or down the screen to  
choose a drag pattern.  
Touch qrto choose the function to  
register.  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Viewing Images on a TV  
Functions that Can be Registered  
Favorites  
Tag or untag images as favorites.  
Next Favorite  
Previous Favorite  
Next Date  
Previous Date  
Smart Shuffle  
Slideshow  
Erase  
Switch to the next image tagged as a favorite  
Switch to the previous image tagged as a favorite.  
Switch to first image with the next shooting date.  
Switch to first image with the previous shooting date.  
Start Smart Shuffle playback.  
View a slideshow.  
Erase an image.  
Protect  
Protect or unlock images.  
Rotate  
Rotate an image.  
Viewing Images on a
Using the supplied AV cable u cconnect the camera to a TV to  
view images you have shot.  
Turn off the camera and TV.  
Connect the camera to the TV.  
Open the camera’s terminal cover and  
fully insert the cable plug into the  
camera’s terminal.  
Insert the cable plug fully into the video  
White and Black  
input terminals as shown in the illustration.  
Yellow  
Yellow  
Black  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Viewing Images on a TV  
Turn on the TV and switch it to the  
input to which the cable is  
connected.  
Turn on the camera.  
Press the 1button to turn on the camera.  
X The image will appear on the TV (nothing  
will appear on the screen of the camera).  
Use the camera screen to perform  
operations.  
After you finish, turn off the camera and  
TV, and unplug the cable.  
What if the images don’t properly dplay on the TV?  
Images will not display correctly if the cra’s vioutput setting (NTSC/PAL)  
does not match the TV system. Touthen nto choose the 3tab,  
then choose [Video System] switch correct vdeo system.  
You can only perforwinoperations when connected to a TV:  
Switchinimges  
Drag hozontally acrscreen, or tap the camera lightly with your  
finger (p28, 29).  
Touch Actns (113)  
Smart Shuffle, and image erase cannot be called up.  
Magnification  
Move the zoom lever toward k(p. 112)  
Movie playback (p. 33)  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing Images on a High-Definition TV  
Use the separately sold HDMI Cable HTC-100 to connect the camera to a  
high-definition TV for an enhanced viewing experience.  
Turn off the camera and TV.  
Connect the camera to the TV.  
Open the cover and fully insert the cable  
plug into the camera’s HDMI terminal.  
Fully insert the cable plug into the TV’s  
HDMI terminal.  
Follow Steps 3 and 4 on p. 114 to display  
the images.  
You can only peorm e following operations when connected to a high-  
definition TV:  
Switching images  
Drag horizontally across the screen, or tap the camera lightly with your  
finger (pp. 28, 29).  
Touch Actions (p. 113)  
Favorites, Smart Shuffle, and image erase cannot be called up.  
Magnification  
Move the zoom lever toward k(p. 112)  
Movie playback (p. 33)  
Operation sounds will not play.  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Displaying Various Images  
(Smart Shuffle)  
The camera will choose four images based on the displayed image.  
If you choose one of those images, the camera will choose four more images  
letting you enjoy the playing back of images in an unexpected order.  
This will work best if you take many shots of various scenes.  
Choose  
.
Touch ø, then drag vertically up or  
down the screen to choose  
.
X Four possible image choices will display.  
Choose an iage.  
Touch the e you want to view next.  
X ge yohose will display in the  
cthe scren, and the next four  
posle choices will appear.  
you ouch the image in the center of the  
reen, it will display full-screen. Touch it  
again to restore the original display.  
Touch Úto return to single image view.  
Only still images shot with this camera will play back in Smart Shuffle.  
Smart Shuffle is not available in the following situations:  
- If there are less than 50 images taken with this camera on the  
memory card.  
- If you play back images other than candidates selected by the  
camera.  
- During filtered playback.  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Protecting Images  
You can protect important images so that they cannot be accidentally erased  
with the camera (pp. 30, 120).  
Choose :.  
Touch ø, then drag vertically up or  
down the menu to the left to choose :.  
X Once it is set,  
will appear.  
To unlock an image, touch øagain,  
then drag vertically up or down the screen  
to choose :.  
If you format the memory card (pp. 22, 51), protected images will also be  
erased.  
Protected images cannot be erashe cara’s erase function. To  
erase an image, cancel protection
Using the Menu  
Choose [Protect].  
Touch ø, then nto choose the  
1tab, and touch [Protect].  
Choose a selection method.  
Touch a selection method.  
Touch Úto return to the menu screen.  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Protecting Images  
Choosing Images Individually  
Choose [Select].  
Follow Step 2 on p. 118 to touch [Select].  
Choose images.  
Drag horizontally on the screen to choose  
an image, then touch the screen.  
X Once set,  
Touching the screen again deselects the  
image, and disappears.  
will appear on the screen.  
To choose multiple images, repeat the  
above operan.  
Protect.  
uch Úa confirmation screen will  
a
Tou[OK].  
he iages will be protected.  
If you swh shooting or turn off the power before performing the  
operations n Step 3images will not be protected.  
Choose All Images  
Choose [All Images].  
Follow Step 2 on p. 118 to touch [All  
Images].  
Protect images.  
Touch [Protect].  
You can unlock groups of protected images if you choose [Unlock] in  
Step 2.  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erasing All Images  
You can erase all images at once. Since erased images cannot be  
recovered, exercise adequate caution before erasing. Protected images  
(p. 118) cannot be erased.  
Choose [Erase].  
Touch ø, then nto choose the  
1tab, and touch [Erase].  
Choose a selection method.  
Touch a selection method.  
Touch Úto retuto the menu screen.  
Choosing Images idlly  
e [Select].  
Follow Step 2 above, touch [Select].  
Drag across the screen horizontally to  
choose an image, then touch the screen.  
X Once set,  
Touching the screen again deselects the  
image, and disappears.  
will appear on the screen.  
To choose multiple images, repeat the  
above operation.  
Erase.  
If you touch Ú, a confirmation screen will  
appear.  
Touch [OK].  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Erasing All Images  
Choose All Images  
Choose [All Images].  
Follow Step 2 on p. 120, touch [All  
Images].  
Erase.  
Touch [OK].  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Organizing Images by Category  
(My Category)  
You can organize images into categories. You can display the images in a  
category in Filtered Playback (p. 108) and process all images at once by  
using the functions below.  
“Viewing Slideshows” (p. 109), “Protecting Images” (p. 118), “Erasing All  
Images” (p. 120), “Choosing Images for Printing (DPOF)” (p. 134)  
Choose ;.  
Touch ø, then drag vertically up or  
down the screen and touch ;.  
Choose imae
Drantally ross the screen to  
choomage.  
ch e desired category.  
hosn category will appear in  
e.  
uch the category again to cancel, and it  
will turn white.  
To choose multiple images, repeat the  
above operation.  
Make the setting.  
If you touch Ú, a confirmation screen will  
appear.  
Touch [OK].  
Images are automatically categorized by shooting condition as they are shot.  
-
-
: Images with detected faces, or images shot in I, For V.  
: Images detected as or in Amode, or images  
shot in Oor  
: Images shot in , w, Por t.  
,
.
-
You can also display categories by touching øin Step 2, then  
choosing the 1tab, and [My Category].  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Tagging Images as Favorites  
When you tag images as favorites, you can perform operations on just those  
images, or only display those images for easy viewing (p. 108).  
Choose an image.  
Drag horizontally across the screen to  
choose an image.  
Tag an image as a favorite.  
Drag as shown.  
X When you view a tagged image in  
Detailed Information Display,  
will  
appear on the screen.  
Drag again to untag the image.  
If you use Windows 7 or Winista antransfer tagged images to  
the computer, they will be gir rating f 3 (  
(except for movies)
)
Confirm that [Favobeeregistered to Touch Actions (p. 113).  
Easily dplay imaggged as favorites  
In Playback mode, if you drag as shown  
, only  
images tagged as favorites will be displayed.  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Tagging Images as Favorites  
Using the FUNC. Menu  
Choose  
.
Touch ø, then drag vertically up or  
down the menu to the left to choose  
.
X The image will be tagged as Favorite, and  
will appear in Simple Information  
Display and Detailed Information Display.  
To unlock an image, touch øagain,  
then drag vertically up or down the menu  
to the left to choose  
.
Using the Menu  
Chooavoris]  
Touc, then nto choose the  
tabnd touch [Favorites].  
Choose images.  
Drag across the screen horizontally to  
choose an image, then touch the screen.  
X Once set,  
Touching the screen again deselects the  
image and disappears.  
will appear on the screen.  
To choose multiple images, repeat the  
above operation.  
Make the setting.  
If you touch Ú, a confirmation screen will  
appear.  
Touch [OK].  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rotating Images  
You can change the orientation of an image and save it.  
Choose \.  
Touch ø, then drag vertically up or  
down the menu to the left to choose \.  
Rotate the image.  
Touch  
or  
and the image will rotate  
in the chosen direction in 90° increments.  
Touch Úto accept the setting.  
Movies with a resolution of  
not be ated.  
In the screen in Step 2, if yoøen n, you can  
change the icon ordechoohe 1tab and [Rotate].  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Resizing Images  
You can resize images to a lower pixel setting and save the resized image  
as a separate file.  
Choose [Resize].  
Touch ø, then nto choose the  
1tab, and touch [Resize].  
Choose an image.  
Drag horizontally across the screen to  
choose an image, then touch [OK].  
Choose an image size.  
Touch  
,
o
, then touch [OK].  
X The [Save niage?] screen will  
appe
thnew image.  
h [O].  
mage will be saved as a new file.  
Display the new image.  
If you touch Ú, [Display new image?] will  
appear.  
Touch [Yes].  
X The saved image will be displayed.  
You cannot resize an image to a larger size.  
Images recorded at a pixel setting of  
(p. 74), or saved as  
in  
Step 3 cannot be edited.  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Trimming  
You can cut out a portion of a recorded image and save it as a new image  
file.  
Choose [Trimming].  
Touch ø, then nto choose the  
1tab, and touch [Trimming].  
Choose an image.  
Drag horizontally across the screen to  
choose an image, then touch [OK].  
Trimming Area  
Adjust the trimming area.  
X A frame will pear around the portion of  
the imago trimmed.  
X Tginal ige will display in the upper  
lhe trimed image will display in  
the er right.  
yomove the zoom lever, touch  
the image at the bottom right of the  
creen, you can change the frame size.  
If you drag on the image at the upper left  
or the image at the bottom right, you can  
move the frame.  
Trimming ArDplay  
Recordpixel
after trimm
If you touch  
, you can change the  
frame orientation.  
In an image with detected faces, gray  
frames appear around the faces located in  
the upper left image. The frames can be  
used for trimming. You can switch  
between frames by touching  
.
Touch [New File].  
X The [Save new image?] screen will  
appear.  
Save as a new image and display.  
Follow Steps 4 and 5 on p. 126.  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adding Effects with the My Colors Function  
Images with a recording pixel setting of  
or  
(p. 74), or images  
resized as  
cannot be edited.  
The width and height ratio of an image that can be changed is fixed at  
4:3 (for a vertical image 3:4).  
The number of recorded pixels in a trimmed image will be smaller than  
before trimming.  
Adding Effects with the My Colors  
Function  
You can change the color of an image and save it as a separate image.  
Refer to p. 79 for details on each menu item.  
Choose [My ors].  
Tou, thento choose the  
1tatouch [My Colors].  
se n image.  
horizontally across the screen to  
ose an image, then touch [OK].  
Choose a menu option.  
Touch an option.  
Touch qrto display other available  
options.  
Touch [OK].  
X The [Save new image?] screen will  
appear.  
Save as a new image and display.  
Follow Steps 4 and 5 on p. 126.  
If you repeatedly change the color of an image, the quality will gradually  
deteriorate and you may not achieve the expected color.  
The tone of images changed with this function may vary from those  
recorded with the My Colors function (p. 79).  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Correcting the Brightness (i-Contrast)  
The camera can detect areas in an image, such as faces or backgrounds,  
that are too dark and automatically adjust them to the optimum brightness.  
Also, when the overall image is lacking in contrast, the camera will automatically  
correct the image for a sharper impression. You can choose from 4 levels of  
correction: [Auto], [Low], [Medium] or [High]. Corrected images will be saved as a  
new file.  
Choose [i-Contrast].  
Touch ø, then nto choose the  
1tab, and touch [i-Contrast].  
Choose an image.  
Drag horizonlly across the screen to  
choose aimge, then touch [OK].  
Cha meu item.  
Toqrto choose an item, and touch  
OK
he [Save new image?] screen will  
ppear.  
Save as a new image and display.  
Follow Steps 4 and 5 on p. 126.  
What if the image wasn’t corrected by the [Auto] option as  
well as you would like?  
Choose [Low], [Medium] or [High] and adjust the image.  
Under some conditions, the image may appear coarse or the correction  
setting may not be suitable.  
Repeatedly adjusting the same image may cause the quality to  
deteriorate.  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Correcting the Red-Eye Effect  
You can automatically correct red eyes in images and save them as new  
files.  
Choose [Red-Eye Correction].  
Touch ø, then nto choose the  
1tab, and touch [Red-Eye Correction].  
Choose and Correct the image.  
Drag horizontally across the screen to  
choose an image, then touch [OK].  
X Red-eye detected by the camera will be  
corrected and a frame will appear around  
the corrected poon.  
You can magr reduce the size of the  
imag the pcedures in  
“MagImages(p. 112).  
as new image and display.  
h [New File].  
image will be saved as a new file.  
Follow Step 5 on p. 126.  
Some images may not be properly corrected.  
When [Overwrite] in Step 4 is chosen, the uncorrected image is  
overwritten with the corrected data, erasing the original image.  
Protected images cannot be overwritten.  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
8
Printing  
This chapter explains how to cmages or printing, and print  
using a PictBridge comprinsold separately, p. 40). Please  
also refer to the Persong uide.  
anon-and PictBridge Compliant Printers  
SELPHY series  
PIXMA series  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Printing Images  
You can easily print the pictures you take by connecting the camera to a  
PictBridge compliant printer using the supplied interface cable (p. 2).  
Turn off the camera and printer.  
Connect the camera to the printer.  
Open the cover, and insert the small end  
of the plug firmly into the camera terminal  
in the direction shown.  
Insert the cable’s larger plug into the  
printer. For connection details, refer to the  
user guide provied with the printer.  
Turn on the riter.  
on e camera.  
the 1button to turn on the camera.  
Choose an image to print.  
Drag horizontally across the screen to  
choose an image.  
Print images.  
Touch ø, then drag vertically up or  
down the menu at the left to choose 2.  
X The Print Settings screen will appear.  
Touch [Print].  
X Printing will start.  
If you want to print additional images,  
repeat Steps 5 and 6 after printing has  
completed.  
After printing has completed, turn off the  
camera and printer, and unplug the  
interface cable.  
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Printing from the Print List (DPOF)  
Refer to the Personal Printing Guide for details on printing.  
Refer to p. 40 for Canon-brand Pictbridge compliant printers. Index  
printing is not available with the CP710/CP510/CP400/CP330/CP300/  
CP220/CP200 printers.  
Printing from the Print List (DPOF)  
You can add images to the print list (DPOF) directly after shooting or during  
playback in the ømenu.  
You can print from a print list simply by connecting your camera and printer.  
These selection methods comply with the DPOF (Digital Print Order Format)  
standards.  
Easily Add Images to the PrinList  
Chan imge.  
Drahorizontally across the screen to  
hooe an image.  
oose c(videos will be  
excluded).  
Touch ø, then drag vertically up or  
down the menu at the left to choose 2.  
Print list.  
Touch opto choose the number of  
prints, then touch [Add].  
To cancel adding images, choose the  
added images, follow Step 2, and touch  
[Remove].  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Choosing Images for Printing (DPOF)  
Print Added Images  
The following examples use the Canon SELPHY series printers.  
Number of copies to print  
Connect the camera to the printer.  
Follow Steps 1 - 4 on p. 132.  
Print.  
Touch [Print now].  
X Printing will start.  
If you stop the printer during printing and  
start again, it will start from the next print.  
Choosing Images for Printig (DPOF)  
You can choose up to 998 images on a y card fprinting and specify  
settings such as the number os so at they can be printed together or  
processed at a photo develoe. Tese selection methods comply  
with the DPOF (Digil Pnt Oat) standards.  
Print Settins  
You can set the print type, date and file number. These settings apply to all  
images chosen for printing.  
Choose [Print Settings].  
Touch ø, then nto choose the  
2tab, and touch [Print Settings].  
Adjust the settings.  
Drag vertically up or down the screen to  
choose an item, then touch qrto make  
settings.  
Once you touch Ú, the settings will be  
made, and the menu screen will reappear.  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Choosing Images for Printing (DPOF)  
Prints one image per page.  
Standard  
Index  
Print Type  
Prints several reduced size images per page.  
Both  
On  
Off  
On  
Off  
On  
Off  
Prints both standard and index formats.  
Prints the shooting date.  
Date  
Prints the file number.  
File No.  
Removes all print settings after printing.  
Clear DPOF  
data  
Some printers or photo developer services may not be able to reflect all  
of the settings in the output.  
may appear when using a memory card with print settings set by a  
different camera. These settings will be orwritten with those set by  
your camera.  
If [Date] is set to [On], some ps may nt the date twice.  
With [Index] choseated [File No.] options cannot be set to  
[On] at the same t
The date ill pristyle set in the [Date/Time] function in the  
3tab (20).  
Choosing the Number of Copies  
Choose [Select Images & Qty.].  
Touch ø, then nto choose the  
2tab, and touch [Select Images & Qty.].  
Choose an image.  
Drag horizontally across the screen to  
choose an image, then touch opto set  
the number of print copies (max. 99).  
To choose multiple images, repeat the  
above operation.  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Choosing Images for Printing (DPOF)  
For [Index], touch the screen (the number  
of prints cannot be chosen). Once chosen,  
will appear. If you touch inside the  
frame again,  
will disappear.  
Touch Úto complete the setting and  
return to the menu screen.  
Set All Images to Print Once  
Choose [Select All Images].  
Touch [Select All Images] in Step 1 on  
p. 135.  
Make print settngs.  
Touch [OK]
Clearing All Selections  
se Clear All Selections].  
h [Clear All Selections] in Step 1 on  
35.  
All selections will be cleared.  
Touch [OK].  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9
Customizing Camera  
Settings  
You can customize various settings to sur shooting preferences.  
The first part of this chapter exonvennt and commonly used  
functions. The latter parlainw to change shooting and  
playback settings to surpes.  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing Camera Settings  
You can customize convenient and commonly used functions from the 3  
tab (p. 46).  
Changing Sounds  
You can change each of the camera's operation sounds.  
Touch [Sound Options].  
Drag vertically up or down the screen to  
choose an option, then touch qrto  
choose a setting.  
Preset sounds.  
(cannot be mdified)  
1
Preset und
2
You can uincluded software to  
the sods.  
Turning off Hints & ps  
You can turn off this fuctionhinand tips for menus will always  
display.  
Choose [Hints & Tips], then touch qrto  
choose [Off].  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing Camera Settings  
Changing the Start-up Screen  
You can change the start-up image that appears on the screen when you  
turn on the camera.  
Touch [Start-up Image].  
Touch an option.  
No start-up image.  
Preset images.  
1
(cannot be modified)  
Preset images.  
2
You can set recorded images, and use the  
included software to change the images.  
Registering Recorded Imageas the Start-up  
Screen  
When you press the 1buttand camera to Playback mode, you  
can register recorded ima
ouch [Start-up Image].  
Touch [2], then touch  
.
Drag horizontally across the screen to  
choose an image, then touch [OK].  
X The [Register?] screen will appear.  
Touch [OK].  
Any previously registered start-up image will be overwritten when  
registering a new start-up image.  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing Camera Settings  
Register the start-up image or sounds saved with the  
included software  
You can use the included software to register dedicated sounds for various  
camera sounds, and start-up images to the camera using the included software.  
Refer to the Software Guide for details.  
Changing the Screen Color  
Choose [Color Option], then touch qrto  
choose an option.  
Changing the File Numbssignment  
Images you shoot are automsigd file numbers in the order they  
were taken, from 001 – 999ed to folders of up to 2,000 images.  
You can change thfile numbement.  
Choose [File Numbering], then touch qr  
to choose an option.  
Even if you shoot using a new  
memory card, the file numbers  
Continuous  
Auto Reset  
are assigned consecutively  
until an image with the number  
9999 is taken/saved.  
If you replace the memory card  
with a new one, or a new folder  
is created, file numbering  
begins with 0001 again.  
If you use a memory card already containing images, the newly  
assigned file numbers may continue the existing numbering for both the  
[Continuous] and [Auto Reset] settings. If you want to start over with file  
number 0001, format the memory card before use (pp. 22, 51).  
Refer to the Software Guide for information regarding folder structure or  
image types.  
140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing Camera Settings  
Creating Folders by Shooting Date  
Images are saved into folders created each month, however, you can also  
create folders by shooting date.  
Choose [Create Folder], then touch qrto  
choose [Daily].  
Images will be saved into folders created  
on each shooting date.  
Changing the Lens Retract Time  
For safety reasons, the lens retracts about 1 mute after pressing the 1  
button when in a Shooting mode (p. 28). If yoant the lens to retract  
immediately when you press the 1, set tretract time to [0 sec.].  
Chose [Lens Retract], then touch qrto  
oos[0 sec.].  
Turning off the Power Saving Function  
You can set the power saving function (p. 52) to [Off]. Setting it to [On] is  
recommended to save battery power.  
Touch [Power Saving].  
Drag vertically up or down the screen to  
choose [Auto Power Down], then touch  
qrto choose [Off].  
If you set the power saving function to  
[Off], be sure to turn the camera off after  
use.  
141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing Camera Settings  
Setting the Screen Shut-Off Time  
You can adjust the time the screen takes to shut off automatically (p. 52).  
This also works when [Auto Power Down] is set to [Off].  
Touch [Power Saving].  
Drag vertically up or down the screen to  
choose [Display Off], then touch qrto  
choose a time.  
In order to save battery power, it is  
recommended to choose less than  
[1 min.].  
Using the World Clock  
When traveling abroad, you can record ies witocal dates and times  
simply by switching the time zone settu pre-gister the destination  
time zones, you can enjoy the cvenief not having to switch the Date/  
Time settings.  
She home time zone.  
Touch [Time Zone].  
When setting this for the first time, check  
the information that displays on the screen  
at the left, then touch [Time Zone].  
Touch qrto choose the home time zone.  
Touch  
to set daylight saving time  
(adds 1 hour).  
Touch Ú.  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Changing Camera Settings  
Set the world time zone.  
Touch [ World], then touch [Time  
Zone].  
Touch qrto choose the destination time  
zone.  
You can also set the daylight saving time  
as in Step 1.  
Touch Ú.  
Choose the world time zone.  
Touch [ World], then touch Ú.  
X
will appear in the [Time Zone] or  
shooting screen (p. 162).  
If you change the date or time (b) in th
time and date will automaticae.  
setting, your [  
Home]  
Changing the Dd ime  
You can change he date aettings.  
Touch [Date/time].  
Touch the option you want to set, then  
touch opto make the setting.  
143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing Camera Settings  
Calibrating the Touch Panel  
You can calibrate the touch panel if you are having difficulty choosing items  
or buttons. Be sure to use the toggle attached to the strap to calibrate the  
touch panel accurately.  
Touch [Calibration].  
Use the toggle attached to the strap to  
touch  
that apears on the screen  
(p. 14).  
Follow on-scen instructions and  
toucreen fr times in the  
llowder: in the upper left, lower left,  
r rit and upper right parts of the  
n.  
Only use the tached toggle perform operations. Do not use other  
objects, such pens pencils.  
144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing Shooting Function Settings  
If you set the mode switch to 4, and the mode to G, you can change the  
settings in the 4tab (p. 46).  
Before attempting to shoot using a function explained in this chapter in  
modes other than Gmode, check if the function is available in those  
modes (pp. 166 – 167).  
Turning off the AF Assist Beam  
The lamp will automatically light to assist focusing in low light conditions  
when you press the shutter button halfway. You can turn off the lamp.  
Choose [AF-assist Beam], then touch qr  
to choose [O.  
Turning Off the ye Reduction Function  
The red-eye redction lamp liin order to reduce the red-eye effect that  
occurs when shoing in ark conditions with the flash. You can turn off this  
function.  
Touch [Flash Settings].  
Drag vertically up or down the screen to  
choose [Red-Eye Lamp], then touch qr  
to choose [Off].  
145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Changing Shooting Function Settings  
Changing the Image Display Right After  
Shooting  
You can change the way the image displays right after shooting.  
Choose [Review], then touch qrto  
choose an option.  
2 – 10 sec. Displays images for the set time.  
The image displays until you press  
the shutter button halfway.  
Hold  
Off  
No image displays  
Changing the Way the Image Displays Right  
After Shooting  
You can change the way the image disright ar shooting.  
oosReview Info], then touch qrto  
se option.  
Displays the image only.  
Displays detailed information  
(p. 43).  
Detailed  
The area inside the AF frame is  
magnified, allowing you to check  
Focus Check the focus. The procedure is the  
same as in “Checking the Focus”  
(p. 111).  
146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing Shooting Function Settings  
Displaying the Overlay  
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide  
to confirm the printable area for postcard size prints.  
Choose [Disp. Overlay], then touch qrto  
choose an option.  
Grid Lines A grid overlays the display.  
Gray bars will appear on the top  
and bottom of the display. This  
3:2 Guide  
area will not print when printing  
on paper with a 3:2 aspect ratio.  
Both grid lines, and the 3:2 guide  
ll display.  
Both  
In  
mode, you cannot set [3:2 GuidoBoth].  
Grid Lines will not be recorde ima
The gray areas displayed wituide] arthe areas that will not be  
printed. The actual recowill include the portion in the gray  
areas.  
Changing the IS-Me Settings  
Choose [IS Mode], then touch qrto  
choose an option.  
Image stabilization is always on.  
You can confirm the result  
Continuous  
directly on the display, which  
makes it easier to check the  
composition or focus.  
Image stabilization is only active  
at the moment of shooting.  
Shoot Only  
Panning  
Image stabilization only counters  
up and down motion. This option  
is recommended for shooting  
objects moving horizontally.  
If camera shake is too strong, attach the camera to a tripod. You should  
set the IS Mode to [Off] when the camera is attached to a tripod.  
When using [Panning], hold the camera horizontally to shoot. Image  
stabilization does not work when the camera is held vertically.  
147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Changing Shooting Function Settings  
Changing Icon Order (Icon Layout)  
You can change the order of icons, such as ø, l, etc. that display  
on the screen.  
Display the settings screen.  
In a shooting screen, touch and hold one  
of the icons.  
When [Customize the order of on-screen  
icons] appears, lift your finger off the  
screen.  
Change the order.  
Drag the icoyowant to move to the  
desirecation
X The l move
he icou are dragging will switch  
es th any icon that is already in the  
you re moving to.  
E
Touch [Exit].  
In the screen in Step 2, if you touch øthen n, you can change  
the icon order by choosing the 4tab and [Icon Layout].  
Preset Layouts  
You can rearrange all icons at once.  
In Step 1 above, touch [Preset Layouts].  
Touch the desired layout.  
Touch [OK].  
If you touch [Cancel], the layout will not  
change, and the settings screen will  
reappear.  
148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing Playback Function Settings  
You can adjust the settings in the 1tab by pressing the 1button (p. 46).  
Turning Off Active Display  
You can turn off Active Display (pp. 29, 112) so that gently tapping the side  
of the camera or tilting the camera does not cause images to switch.  
Choose [Active Display], then touch qrto  
choose [Off].  
Choosing the Image that FirsDisplays  
in Playback  
Che [Resume], then touch qrto  
hooe an option.  
Resumes with the image last  
st seen  
viewed.  
Resumes with the most  
Last shot  
recently shot image.  
149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Useful Information  
This chapter introduces how to e AC aapter kit, and Eye-Fi  
card (both sold separatroubooting tips, and contains lists of  
functions and items thon he screen. The index also  
appears at thend.  
151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Household Power  
If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the  
camera without worrying about how much charge is left in the battery.  
Turn off the camera.  
Terminals  
Insert the coupler.  
Open the cover (p. 18) and insert the  
coupler as shown until it locks into place  
with a click.  
Close the cover (p. 18).  
Plug the cod io the coupler.  
Open over ad fully insert the plug  
into pler.  
ct the power cord.  
Connect the power cord to the compact  
power adapter, then plug the other end  
into a power outlet.  
You can turn the camera on to use it.  
After you finish, turn off the camera and  
unplug the power cord from the power  
outlet.  
Do not unplug the plug or power cord with the camera turned on. This  
could erase images you have taken or damage the camera.  
152  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using an Eye-Fi Card  
Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is  
authorized in the country or territory of use (p. 17).  
When you put a prepared Eye-Fi card into the camera, you can  
automatically transfer your images wirelessly to a computer, or upload them  
to a web service.  
Image transfer is a function of the Eye-Fi card. For details on how to setup  
and use the card, and concerning problems transferring images, please refer  
to the Eye-Fi card user guide, or contact the manufacturer.  
Please keep the following things in mind when using an Eye-Fi card.  
Even if you set [Eye-Fi trans.] to [Disable] (p. 154), the Eye-Fi card may  
transmit radio waves. Be sure to remove the Eye-Fi card from the  
camera before entering areas that prevent nauthorized transmission of  
radio waves, such as hospitals and arplas.  
If you have trouble transferring imagesck the card or computer  
settings. For details, refer to r guide upplied with the card.  
Depending on the connection of the wiess network, it may take  
time to transfer imaimatransfer may be interrupted.  
The transfer functiuse e Eye-Fi card to become hot.  
Battery cnsuptiouicker than in normal use.  
Camera perations wower than in normal use. This may be  
resolved y settin[Eye-Fi trans.] to [Disable] (p. 154).  
If you put an Eye-Fi cd into the camera, the connection status can be  
checked in the shooting screen (Information Display) and playback screen  
(Simple Information Display).  
(Gray)  
Not connected  
(Flashing white) Connecting  
(White)  
Transfer standby  
(Animated)  
Transferring  
Interrupted  
Error retrieving Eye-Fi card info  
(Turn the camera off and on again. If this continues to appear,  
there may be a problem with the card).  
*
will appear on transferred images.  
The power saving function does not work while transferring images.  
153  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using an Eye-Fi Card  
Checking Connection Information  
You can check the Eye-Fi card's access point SSID, or connection status.  
Choose [Connection info].  
Touch ø, then n to choose the  
3 tab, and touch [Eye-Fi Settings].  
Touch [Connection info], then touch  
[Connection info] again.  
X The Connection info screen will appear.  
Disabling Eye-Fi Transfer  
You can set the card to disable Eye-Fi transfer
oosye-Fi trans.], then  
ble
h ø, then n to choose the  
ab, and touch [Eye-Fi Settings].  
Choose [Eye-Fi trans.], then touch qr to  
choose [Disable].  
What if [Eye-Fi Settings] does not appear?  
[Eye-Fi Settings] will only appear when the Eye-Fi card is inserted in the camera.  
If the Eye-Fi card has a write-protect tab, you will not be able to check the  
card's connection status, or disable Eye-Fi card transmission when the  
tab is in the locked position.  
154  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
If you think there is a problem with the camera, first check the following. If  
the items below do not solve your problem, contact a Canon Customer  
Support Help Desk as listed on the included customer support list.  
Power  
You pressed the power button, but nothing happened.  
Confirm that the battery is not depleted (p. 16).  
Confirm that the battery is properly inserted (p. 18).  
Confirm that the memory card/battery cover is securely closed (p. 18).  
If the battery terminals are dirty, battery performance will decrease. Clean the  
terminals with a cotton swab and re-insert the battery several times.  
Battery is consumed quickly.  
Battery performance decreases at low temperatures. Warm the battery, for  
example, by placing it in your pocket with the ternal cover on.  
Lens will not retract.  
Do not open the memory card/batterr while power is on. After closing  
the memory card/battery cover, turer on tn back off (p. 18).  
TV output  
Image is distoed or nong on TV (p. 115).  
Shooting  
Cannot shoot.  
When in Playback mode (p. 28), press the shutter button halfway (p. 23).  
Screen does not display properly in dark places (p. 44).  
Screen does not display properly while shooting.  
Please note, the following will not be recorded in still images, but will be recorded  
in movies.  
When the camera is subjected to powerful light sources, the display may  
darken.  
When shooting under fluorescent lighting, the screen may flicker.  
When shooting bright light sources, a bar of light (purplish red) may appear on  
the screen. This may not be very noticeable if using exposure compensation (p.  
100) when shooting a movie.  
happears on the screen and the shot cannot be taken even  
though the shutter button was pressed fully (p. 27).  
155  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
appears when the shutter button was pressed halfway (p. 64)  
Set the [IS mode] to [Continuous] (p. 147).  
Set the flash to h(p. 71).  
Increase the ISO speed (p. 75).  
Attach the camera to a tripod.  
Image is blurred.  
Press the shutter button halfway to focus on the subject, then press fully to  
shoot (p. 23).  
Shoot the subject within the focusing distance (p. 170).  
Set the [AF-assist Beam] to [On] (p. 145).  
Confirm that functions which you do not intend to use (macro, etc.) are not set.  
Shoot using the focus lock or AF lock (pp. 82, 87).  
Even when you press the shutter button halfway, the AF frame  
does not appear, and the camera does not focus.  
If you center on the light and dark contrasting area of the subject and push the  
shutter button halfway, or repeatedly push the shuttebutton halfway, the frame  
will appear and the camera will focus.  
Subject is too dark.  
Set the flash to h(p. 71).  
Adjust the brightness with exposure coon (p. 7.  
Adjust the image with i-Contra91,
Use the AE lock, or spot metoot p. 89, 90).  
Subject is too brigt ove).  
Set the flash to !. 64).  
Adjust the brightnewith exposurompensation (p. 71).  
Use the AE lock, or ot meing to shoot (pp. 89, 90).  
Reduce the light illumitinthe subject.  
Image is dark even though the flash fired (p. 27).  
Increase the ISO speed (p. 75).  
Shoot within an appropriate distance for flash photography (p. 71).  
Image taken using the flash is too bright (overexposed).  
Shoot within an appropriate distance for flash photography (p. 71).  
Set the flash to !(p. 64).  
White dots appear on the image when shooting with the flash.  
Light from the flash has reflected off dust particles or other objects in the air.  
Image appears rough or grainy.  
Shoot with the ISO speed on a lower setting (p. 75).  
Depending on the Shooting mode, when shooting in a high ISO speed the image  
may appear rough or grainy (pp. 56, 75).  
156  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Eyes appear red (p. 92).  
Set the [Red-Eye Lamp] to [On] (p. 145). When shooting with the flash, the lamp  
(on the front of the camera) (p. 42) lights, and for approximately 1 second while  
the camera is reducing red-eye, it is not possible to shoot. It is more effective if  
the subject is looking directly at the lamp. Even better results can be obtained by  
increasing the lighting in indoor settings or approaching closer to the subject.  
Recording images to the memory card takes a long time, or  
continuous shooting slows down.  
Perform a low-level format of the memory card in the camera (p. 51).  
When you can’t make settings for shooting functions or FUNC.  
menu.  
The items in which settings can be made differ depending on the shooting mode  
(pp. 164 – 167).  
Shooting movies  
Correct shooting time does not displ, ostops.  
Format the memory card in the cameror use emory card capable of  
recording at high speeds. Even whooting me does not display  
properly, the recorded video will be tth that it as actually shot (pp. 32,  
99).  
appeared on the scd shoting ended automatically.  
The camera’s inteal emufficient. Try one of the following:  
Perform a low-vel format omory card in the camera (p. 51).  
Change the imae quality setting (p. 98).  
Use a memory cd capale of recording at high speeds (p. 99).  
Zoom does not opte.  
You can use the digital zoom while recording, but not the optical zoom (p. 102).  
157  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Playback  
Cannot play back images or movies.  
If the file name or folder structure is changed on a computer, you may not be  
able to play back images or movies. Refer to the Software Guide for information  
regarding folder structure or file names.  
Playback stops, or audio cuts out.  
Use a memory card that has been formatted on this camera (p. 51).  
If you copy a movie to a memory card that reads slowly, playback may interrupt  
momentarily.  
Depending on its capabilities, when playing movies, the computer may drop  
frames or the audio may cut out.  
Screen  
Touch operations do not work as expected.  
Since the camera uses a pressure sensitive toucal, try touching the screen  
slightly harder or use the toggle attachee strap . 14).  
Calibrate the touch panel (p. 144).  
appears in the upper rigf the een.  
Your finger is touching the upart the screen. Take your finger off the  
screen.  
Computer  
Cannot transfer imaes o a computer.  
It may be possible to solve the problem when the camera is connected to the  
computer via cable by reducing the transfer speed.  
Turn off the camera. Keeping the shutter button pressed fully, hold the zoom  
lever toward i, and press the 1button to turn on the camera. Now move the  
zoom lever toward j. Touch [B] in the screen that appears, then touch it again.  
Eye-Fi Card  
Cannot send images (p. 153).  
158  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
List of Messages That Appear on the  
Screen  
If error messages appear on the screen, try one of the following solutions.  
No memory card  
The memory card is not installed in the correct direction. Install the memory card  
in the correct direction (p. 18).  
Memory card locked  
The SD memory card, SDHC memory card or SDXC memory card’s write  
protect tab is set to “LOCK”. Unlock the write protect tab (p. 17).  
Cannot record!  
You attempted to shoot an image without a memory card, or with a memory card  
installed incorrectly. Install the memory card in the correct direction to shoot  
(p. 18).  
Memory card error (p. 51)  
If the same message appears even when a formted memory card is installed  
in the correct direction, contact your Canon ustmer Support Help Desk  
(p. 18).  
Insufficient space on card  
There is not enough free space on thory card shoot (pp. 24, 53, 69, 83)  
or edit images (pp. 126 – 1ase timages (pp. 28, 105) to open space for  
new images, or insert an morcard (p. 18).  
Touch AF unavilble  
Touch AF cannbe used in rrent Shooting mode (p. 164).  
Your finger is toching the Shooting mode icon on the screen (p. 158). Take you  
finger off the scrn, theuse Touch AF.  
Touch AF cancele
The camera could no longer recognize the subject you selected using Touch AF  
(p. 86).  
Face not detected  
You attempted to choose a subject other than a face for Touch AF while in  
.
Change the battery pack. (p. 16)  
No Image.  
There are no images recorded on the memory card that can be displayed.  
Protected! (p. 118)  
Unidentified Image/Incompatible JPEG/Image too large./Cannot  
play back/AVI  
Unsupported images, or images with corrupted data cannot be displayed.  
Images manipulated on a computer, that have had their file name changed, or  
have been taken with a different camera may not display.  
159  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Troubleshooting  
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot  
register this image!/Cannot modify/Cannot assign to category  
Incompatible images cannot be magnified (p. 112), Tagging Images as  
Favorites (p. 123), rotated (p. 125), edited (pp. 126 – 130), registered to the  
start-up screen (p. 139), categorized (p. 122), or added to a print list (p. 133).  
Images manipulated on a computer, that have had their file name changed, or  
have been taken with a different camera may not be magnified, rotated, edited,  
registered to the start-up screen, categorized, or added to a print list.  
Movies cannot be magnified (p. 112), edited (pp. 126 – 130), added to a print list  
(p. 133), or registered to the start-up screen (p. 139).  
Exceeded selection limit  
You chose more than 998 images in print settings. Choose less than 998  
images (p. 135).  
Print settings could not be saved correctly. Reduce the number of selected  
images and try again (p. 135).  
Communication error  
Images could not be transferred to the computeor pnted due to the large  
amount of images (approx. 1000) stored on the my card. Use a  
commercially available USB card readensfer timages. Insert the  
memory card into the printer’s card slot
Naming error!  
The folder or image could nod bause there is an image with the  
same file name as the older at thcamera is attempting to create, or  
the highest possiblfile numbeady been reached. In the 3menu,  
change [File Numbing] to [Auto t] (p. 140) or format the memory card  
(p. 51).  
Lens Error  
This error can occur if you hold the lens while it is in motion or when using it in a  
location with excessive dust or sand in the air.  
If this error message continues to appear, contact a Canon Customer Support  
Help Desk as there may be a problem with the lens.  
A camera error was detected (Error number)  
If an error code appears directly after taking a picture, the shot may not have  
been recorded. Check the image in Playback mode.  
If this error code reappears, note the number and contact your Canon Customer  
Support Help Desk as there may be a problem with the camera.  
160  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling Precautions  
This camera is a high-precision electronic device. Do not drop it or subject  
it to strong impacts.  
Never place the camera close to magnets, motors or other devices that  
generate strong electromagnetic fields. Exposure to strong magnetic  
fields may cause malfunctions or corrupt image data.  
If water droplets have fallen onto, or dirt is stuck on the camera or screen,  
wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.  
Never use cleaners containing organic solvents to wipe the camera or  
screen.  
Use a commercially available blower brush to remove dust from the lens.  
For stubborn dirt contact a Canon Customer Support Help Desk as listed  
on the customer support leaflet supplied with your camera.  
When you move the camera rapidly from cold to hot temperatures,  
condensation may form on the internal or extnal surfaces of the camera.  
To avoid condensation, put the camera ian irtight, resealable plastic  
bag and let it adjust to temperaturanges owly before removing it  
from the bag.  
If condensation has formstop the camera immediately.  
Continued use may dacaera. Remove the battery and  
memory card, and wait moisre has completely evaporated  
before resumg use.  
161  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Information Displayed on the Screen  
Shooting (Information Display)  
Shooting Mode (p. 42)  
Camera Orientation*  
White Balance (p. 76)  
My Colors (p. 79)  
i-Contrast (p. 91)  
Drive Mode (p. 78)  
Exposure Compensati
(p. 71)  
Sges: rdable  
16, )  
mainig  
Td Time  
(pp. )  
ye-Fi Connection  
tatus (p. 153)  
AF Frame (p. 25)  
Spot AE Point Frame  
(p. 89)  
Red-Eye Correction  
(p. 92)  
Self-Timer  
(pp. 68, 80, 81)  
Date Stamp (p. 67)  
Disp. Overlay (p. 147)  
AE Lock (p. 90), FE Lock  
(p. 90)  
Shutter Speed  
Aperture Value  
Camera Shake Warning  
(p. 156)  
Battery Charge Indicator  
(p. 16)  
Compression (Image  
Quality) (p. 73)  
Recording Pixels  
(pp. 73, 99)  
Focus Range (p. 72),  
AF Lock (p. 87)  
Digital Zoom  
Magnification (p. 65) /  
Digital Tele-converter  
(p. 66)  
Metering Modes (p. 89)  
ISO Speed (p. 75)  
Zoom Bar (p. 24)  
Blink Detection (p. 92)  
Time Zone (p. 142)  
Image Stabilizer (p. 147)  
Flash Mode  
(pp. 64, 71, 94)  
*
: Standard,  
: Held vertically  
When shooting, the camera detects if it is held vertically or horizontally, and adjusts  
settings accordingly for the best shot. It also detects orientation during playback, so  
you can hold the camera in either orientation and it will automatically rotate images for  
correct viewing. This function may not operate correctly when the camera is pointed  
straight up or down.  
162  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Information Displayed on the Screen  
Playback (Detailed Information Display)  
Print List (p. 133)  
My Category (p122)  
Shooting Mode p. 42)  
ISO Speed (p. )  
Exposure Compeation  
(p. 71), Exposure Shif
Amount (p. 100)  
White Balance (p. 76)  
Histogram (p. 44)  
Image Editing (pp. 126 –  
130)  
ransr  
Focus Range (p. 72)  
File Size (p. 74)  
Still Images: Recording  
Pixels (p. 73)  
Movies: Movie Length  
(p. 99)  
Protect (p. 118)  
Favorites (p. 123)  
My Colors (pp. 79, 122)  
Red-Eye Correction  
(pp. 92, 130)  
e (p. 153)  
Charge Indicator  
(p. 16)  
Metering Modes (p. 89)  
Folder Number – File  
Number (p. 140)  
Displayed image number  
/ Total number of images  
Shutter Speed  
Aperture Value, Image  
Quality (Movies) (p. 98)  
Flash (p. 71)  
Compression (Image  
Quality) (p. 73),  
Shooting Date and Time  
(p. 20)  
(Movies)  
i-Contrast (pp. 91, 129)  
Recording Pixels (p. 73)  
163  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions Available in Each Shooting Mode  
4
Shooting modes  
A
G I F V  
Function  
p. 71  
)/Exposure Shift (p. 100)  
Exposure Compensation (  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
h
!
3
Flash (pp. 64, 71, 94)  
*
1
2
*
*
{
{
{
{
{
{
{
{
{
Self-Timer (pp. 68, 80, 81)  
ÒÎ  
$
Touch AF (p. 86)  
AF Lock (p. 87)  
AE Lock (pp. 90, 100)/FE Lock (p. 90)  
Func. Me
{
{
{
{
{
{
{
{
{
{
{
Light Metering (  
)
p. 89  
My Colors (  
)
p. 79  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
White Balance (  
)
p. 76  
ISO Speed (p. 75)  
Focus Range (p. 72)  
Drive Mode (p. 78)  
e
u
W
Recording Pixels (pp. 73, 98)  
Compression Ratio (Image Quality)  
(p. 73)  
{
{
{
{
{
*1 Not selectable, but automatically switches to [On] depending on the shooting conditions.  
*2 Not selectable, but turned on whenever flash is used.  
*3 Fixed to  
.
164  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Functions Available in Each Shooting Mode  
E
4
TY  
w O P t E >z  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
2
2
*
*
{
{
{
{
{
{
{
{
{
{
{
Func. Menu  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
3
*
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{ Selectable, or set automatically. — Not selectable  
165  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menus  
4Shooting Menu  
4
Shooting modes  
AG I F V  
Function  
Face AiAF  
AF Frame (p. 84)  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Fixed frame  
AF Frame Size (p. 85)  
Digital Zoom (p. 65)  
Normal/Small  
Standard  
Off  
Digital Tele-converter (1.7x/2.1x)  
AF-Point Zoom (p. 85)  
Servo AF (p. 88)  
On/Off  
On/Off  
3
*
AF-assist Beam (p. 145) On/Off  
{
{
{
Red-Eye Corr.  
O
Red-Eye LOn/
Auto/Off  
Flash Settings  
(pp. 92, 145)  
5
*
i-Contrast (p. 91)  
Review (p. 146)  
Of– 10
Off/Detailed/heck  
On/Off  
{
{
{
{
{
{
{
{
Review Info (p. 146)  
Blink Detection (p. 92)  
Off/d Lines  
Disp. Overlay (p. 147)  
Icon Layout (p. 148)  
3:2 Guide/Both  
Off  
Continuous  
Shoot Only  
Panning  
IS Mode (p. 147)  
Date Stamp (p. 67)  
Off/Date/Date & Time  
*1 AiAF  
*2 AF frame not displayed.  
*3 [On] when movement is detected or when using Touch AF.  
*4 Always [On].  
*5 Always [Auto].  
166  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menus  
E
4
TY  
w O P t E >z  
1
1
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
*
*
2
*
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
4
*
{
{
{
{
{
{
{
{
{
{
{
{
{
5
*
{
{
{
{
{
{
{
{
{
{
{ Selectable, or set automatically. — Not selectable  
167  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menus  
3Set up Menu  
Item  
Options/Summary  
Ref. Page  
p. 48  
Mute  
On/Off*  
Volume  
Set all operation sounds (5 levels).  
Set the sounds for each camera operation.  
On*/Off  
p. 48  
Sound Options  
Hints & Tips  
LCD Brightness  
Start-up Image  
Color Option  
Format  
p. 138  
p. 138  
p. 49  
Set within a range of ±2.  
Add an image as start-up image.  
Orange*/Blue Gray/Khaki/Pink  
Formats memory card, erasing all data  
Continuous*/Auto Reset  
Monthly*/Daily  
p. 139  
p. 140  
pp. 22, 51  
p. 140  
p. 141  
p. 141  
File Numbering  
Create Folder  
Lens Retract  
1 min.*/0 sec.  
Auto Power Dowf  
Display O10, 20 sec./1*, 2 r 3 min.  
pp. 52,141,  
142  
Power Saving  
Time Zone  
Date/Time  
Home
p. 142  
p. 143  
p. 114  
p. 144  
te angs  
NTSC/PA
Video System  
Calibration  
Calibes the touch panel.  
i connection settings  
(only appears when Eye-Fi card is inserted)  
Eye-Fi Settings  
p. 153  
Language  
Choose display language.  
p. 21  
p. 50  
Reset All  
Returns camera to default settings.  
* Default setting  
168  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menus  
1Playback Menu  
Item  
Options/Summary  
Ref. Page  
p. 109  
p. 120  
p. 118  
p. 125  
p. 123  
p. 122  
Slideshow  
Erase  
Plays back images automatically.  
Erases images.  
Protect  
Protects images.  
Rotate  
Rotates images.  
Favorites  
My Category  
Tags or untags images as favorites.  
Categorizes images.  
Corrects dark portions and contrast in still  
images.  
i-Contrast  
p. 129  
Red-Eye Correction  
Trimming  
Corrects red eyes in still images.  
Trims portions of still image
Resizes and saves still is.  
Adjusts colomages.  
On*/
p. 130  
p. 127  
p. 126  
p. 122  
p. 149  
p. 107  
p. 149  
p. 112  
p. 113  
Resize  
My Colors  
Active Display  
Scroll Display  
Resume  
O
Lat shot  
Transition  
Fade*1/Slide 2/Off  
Rgister a playback function to a drag pattern.  
Set Touch Actions  
* Default setting  
2Print Menu  
Item  
Print  
Options/Summary  
Displays printing screen.  
Ref. Page  
p. 132  
Select Images & Qty.  
Select All Images  
Clear All Selections  
Print Settings  
Chooses individual images for printing.  
Chooses all images for printing.  
Cancels all settings for printing.  
Sets the printing style.  
p. 135  
p. 136  
p. 136  
p. 134  
169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
Camera Effective Pixels . . . . . . . . . . . . Approx. 14.1 million  
Image Sensor . . . . . . . . . . . . . . . . . . . . 1/2.3-inch type CCD (Total number of pixels:  
Approx. 14.5 million)  
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 (W) – 21.5 (T) mm  
35mm film equivalent: 24 (W) – 120 (T) mm  
f/2.8 (W) – f/5.9 (T)  
Zoom Magnification. . . . . . . . . . . . . . . . Approx. 5.0x (Up to approx. 20x in combination with  
the digital zoom)  
LCD Monitor . . . . . . . . . . . . . . . . . . . . . 3.5 TFT LCD color monitor (Touch Panel)  
Approx. 461,000 dots, Picture coverage approx. 100%  
AF Frame Mode . . . . . . . . . . . . . . . . . . Face AiAF/Fixed frame  
Servo AF . . . . . . . . . . . . . . . . . . . . . . . . On/Off  
Focusing Range (from end of lens). . . . Normal: 5 cm (2 in.) – infinity (W)/90 cm (3.0 ft.) –  
infinity (T)  
Macro: 5 – 50 cm (2 in. – 1.6 ft.) (W)  
Infinity: 3 m (9.8 ft.) – infinity  
Kids&Pets: 1 m (3.3 ft.) – infinity  
Shutter. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical shutter anelectronic shutter used  
together  
Shutter Speed . . . . . . . . . . . . . . . . . . . . 1 – 1/3000 ec.  
15 – 1/. (Total utter speed range)  
Image Stabilization . . . . . . . . . . . . . . . . Lens-s
Metering System . . . . . . . . . . . . . . . . . aluativter-weighted average or Spot  
Exposure Compensation. . . . . . . . . ps i3-stop increments  
ISO speed . . . . . . . . . . . . . . . . . . . . O 800/200/400/800/1600  
(Standard Output Sensitiv
Recommended ExposuIndex)  
White Balance. . . . . . . . . . . . . . . . . . Day Light, Cloudy, Tungsten, Fluorescent,  
Fluorescent H, Custom  
Built-in Flash . . . . . . . . . . . . . . . . . Auto, On, Slow Synchro, Off  
* Red-eye correction/Red-eye reduction/FE lock  
settings available  
Built-in Flash Range . . . . . . . . . . . . . . . 50 cm – 3.5 m (W)/ 90 cm – 2.0 m  
(1.6 – 11 ft.) (W)/ (3.0 – 6.6 ft.) (T)  
Shooting Modes . . . . . . . . . . . . . . . . . . Auto, Program AE, Portrait, Night Snapshot,  
Kids&Pets, Indoor, Smart Shutter (Smile, Wink Self-  
Timer, Face Self-timer), Low Light, Color Accent, Color  
Swap, Fish-eye Effect, Miniature Effect, Creative Light  
Effect, Beach, Foliage, Snow, Fireworks, Long  
Shutter, Movie  
Movie Modes: Standard, Color Accent, Color Swap  
Continuous Shooting. . . . . . . . . . . . . . . Approx. 0.7 images/sec.  
Self-timer. . . . . . . . . . . . . . . . . . . . . . . . Approx. 10-sec./Approx. 2-sec. delay, Custom Timer  
i-Contrast. . . . . . . . . . . . . . . . . . . . . . . . Auto/Off  
Recording Media. . . . . . . . . . . . . . . . . . SD memory card, SDHC memory card, SDXC memory  
card, MultiMediaCard, MMCplus memory card,  
HC MMCplus memory card  
File Format . . . . . . . . . . . . . . . . . . . . . . Design rule for Camera File system and DPOF  
compliant (version 1.1)  
170  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Specifications  
Data Type. . . . . . . . . . . . . . . . . . . . . . . . Still images: Exif 2.2 (JPEG)  
Movies: MOV (Image data: H.264, Audio data: Linear  
PCM) (Monaural)  
Number of Recording Pixels  
(Still images). . . . . . . . . . . . . . . . . . . . . . Large: 4320 x 3240 pixels  
Medium 1: 3456 x 2592 pixels  
Medium 2: 2592 x 1944 pixels  
Medium 3: 1600 x 1200 pixels  
Small: 640 x 480 pixels  
Widescreen: 4320 x 2432 pixels  
(Movies) . . . . . . . . . . . . . . . . . . . . . . . . . 1280 x 720 pixels (30 frames/sec.*)  
640 x 480 pixels (30 frames/sec.*)  
320 x 240 pixels (30 frames/sec.*)  
* Actual frame rate is 29.97 frames/sec.  
Compression . . . . . . . . . . . . . . . . . . . . . Fine, Normal  
Number of Possible Shots (CIPA compliant)  
Approx. 220 images  
Playback Function . . . . . . . . . . . . . . . . . Single Image, Movie, Magnified Display, Index,  
Magnified, FilterePlayback, Slideshow, Active  
Display, Scroll Disay, Smart Shuffle, Touch Action  
Editing Function . . . . . . . . . . . . . . . . . . . Erase, ProteMy ategory, Resize, My Colors,  
i-ConTrimmFavorites, Rotate, Red-Eye  
C
Direct Print Type. . . . . . . . . . . . . . . . . . . Picompliant  
Interface . . . . . . . . . . . . . . . . . . . Digitt/output:Hi-Speed USB (mini-B compatible)*  
HDMI (HDMI mini connector)  
log adio output: Monaural*  
og video output: NTSC/PAL selectable*  
edicated connector (female) with unified type of  
digital, audio and video.  
Communication Settis. . . . . . . . . . . MTP, PTP  
Power . . . . . . . . . . . . . . . . . . . . . . Battery Pack NB-6L (rechargeable lithium-ion battery)  
AC Adapter Kit ACK-DC40  
Operating Temperatures . . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)  
Operating Humidity. . . . . . . . . . . . . . . . . 10 – 90%  
Dimensions (CIPA compliant). . . . . . . . . 99.3 x 55.7 x 22.0 mm (3.91 x 2.20 x 0.87 in.)  
Weight (CIPA compliant) . . . . . . . . . . . . Approx. 160 g (5.64 oz.) (Including the battery and  
memory card)  
Approx. 137 g (4.83 oz.) (Camera body only)  
171  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Battery Pack NB-6L  
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable lithium-ion battery  
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 V DC  
Capacity . . . . . . . . . . . . . . . . . . . . . . . . 1000 mAh  
Charging cycles. . . . . . . . . . . . . . . . . . . Approx. 300 times  
Operating temperature . . . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)  
Dimensions . . . . . . . . . . . . . . . . . . . . . . 34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 21 g (0.74 oz.)  
Battery Charger CB-2LY/CB-2LYE  
Rated input . . . . . . . . . . . . . . . . . . . . . . 100 – 240 V AC (50/60 Hz), 0.085 A (100 V) – 0.05 A  
(240 V)  
Rated output . . . . . . . . . . . . . . . . . . . . . 4.2 V DC, 0.7 A  
Charge time. . . . . . . . . . . . . . . . . . . . . . Approx. 1 hour 55 min.  
Operating temperature . . . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)  
Dimensions . . . . . . . . . . . . . . . . . . . . . . 58.6 x 86.4 x 24.1 mm (2.31 × 3.40 × 0.95 in.)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 70 g (2.47 oz.) CB-2LY)  
Approx. 61 g (2.15 ozCB-2LYE) (excluding power  
cord)  
All data is based on tests by Canon
Camera specifications or apprance ubject to change without  
notice.  
172  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
DPOF ..............................................133, 134  
Numerics  
3:2 Guide ................................................147  
A
AC Adapter Kit ..................................39, 152  
Accessories ..............................................38  
Active Display ...........................................29  
AE Lock ............................................90, 100  
AF Frames ................................................25  
AF Lock ....................................................87  
AV Cable ....................................................2  
E
Editing  
i-Contrast .............................................129  
Trimming .............................................127  
DefauSettings .....................................50  
or Messas ......................................159  
Exposure  
AE Lock .........................................90, 100  
Compensation .......................................71  
Correction ..............................................71  
FE Lock .................................................90  
Shift .....................................................100  
Eye-Fi Card ............................................153  
B
Battery  
Battery and Charger Kit .........................39  
Battery Charger .................................2, 15  
Charge Indicator ....................................1
Power Saving ........................52, 141, 14
Recharge .......................................15  
Battery Charger .......................15  
Beach (Scene Mode) ...............
Black and White Imaes ..........
Blink Detection ...........................
Camera Shake ..........................64, 147  
Color Accent (Scene Mode) ...............95, 98  
Color Swap (Scene Mode) .................96, 98  
Components Guide ...................................42  
Compression J Image Quality  
F
Face AiAF .................................................84  
Face Self-Timer ........................................62  
Factory Settings J Default Settings  
Continuous Shooting ................................78  
Creative Light Effect (Scene Mode) ..........59  
Favorites .................................................123  
FE Lock ....................................................90  
File Numbering .......................................140  
Filtered Playback ....................................108  
Fireworks (Scene Mode) ..........................56  
Fish-eye Effect (Scene Mode) ..................57  
Fixed frame ...............................................85  
Flash  
D
Date and Time  
Adding to Image ....................................67  
Setting ...................................................20  
Time Zone ...........................................142  
Date and Time J Date/Time  
Off .........................................................64  
On .........................................................71  
Slow Synchro ........................................93  
Default Settings ........................................50  
Deleting J Erasing  
DIGITAL CAMERA Solution Disk ...............2  
Digital Tele-Converter ...............................66  
Digital Zoom .............................................65  
173  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Focus  
AF Frame Mode .................................... 84  
AF Frames ............................................ 25  
AF Lock ................................................. 87  
AF-Point Zoom ...................................... 85  
Servo AF ............................................... 88  
Focus Check .......................................... 111  
Focus Lock ............................................... 82  
Focus Range ............................................ 72  
Format J Memory Card, Formatting  
Magnified Display ...................................112  
Manual  
White Balance .......................................76  
Menu  
Formatting (Memory Card) ................. 22, 51  
FUNC. Menu  
Basic Operations ................................... 45  
List ...................................................... 164  
List ......................................................166  
Metering Mode .........................................89  
Mode Switch .............................................42  
Movie  
ecordinels ................................... 99  
ting Tim.......................................99  
ing (Playk) .......................33, 102  
iMediaCard/MMCplus/HC MMCplus  
Mory Card J Memory Card  
G
Green Leaves/Autumn Foliage  
(Scene Mode) ........................................... 56  
Grid Lines ............................................... 147  
H
Histogram .........................................
Household Power ...........................
My ategory ...........................................122  
My Colors ................................................. 79  
I
i-Contrast ...................................... 91
Image Quality (Compresn Ratio) ....... 73  
Images  
N
Night Snapshot (Scene Mode) .................55  
Display Time ....................................... 146  
Editing J Editing  
Number of Shots ................................16, 74  
Erasing Images ............................. 30, 120  
Playback J View  
P
Package Contents J Accessories  
Protect ................................................. 118  
Indicator .................................................... 44  
Indoor (Scene Mode) ................................ 55  
Infinity ....................................................... 72  
Interface Cable ........................................... 2  
ISO Speed ................................................ 75  
Personal Printing Guide .............................2  
Playback J View  
Playback Button .................................28, 42  
Playback With Transition Effects ............112  
Portrait (Scene Mode) .............................. 54  
Postcard Size ...........................................74  
Power J Battery  
Power Button ............................................ 42  
Power Saving ...........................52, 141, 142  
Print Settings (DPOF) .............................133  
Printer .......................................................38  
Printing ...................................................132  
Program AE ..............................................70  
Protect ....................................................118  
K
Kids&Pets (Scene Mode) ......................... 55  
L
Lamp .......................................... 42, 68, 145  
Low Light (Scene Mode) .......................... 55  
174  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trimming .................................................127  
R
Recording Pixels (Image Size) .................73  
Red-Eye  
Auto Correction .....................................92  
Correction ............................................130  
Reduction ............................................145  
Resizing (Making Images Smaller) .........126  
Rotating Images .....................................125  
Viewing (Playback)  
Slideshow ............................................109  
Viewing Images on a TV .................114, 116  
S
Screen  
Display Language .................................21  
Switching the Display ............................43  
Scroll Display ..........................................107  
SD/SDHC/SDXC Memory Card J Memory  
Card  
Self-Timer  
st Strap Strap  
10 second Self-Timer ............................68  
Changing Delay and  
Number of Shots ...................................
Face Self-Timer .....................................6
Two Second Self-Timer ..........80  
Wink Self-Timer ....................1  
Sepia Tones ...................
Servo AF ..................................
Shooting Date and me J Date/Time  
Shutter Button ...................................23  
Slideshow ......................................109  
Smart Shuffle ..........................................117  
Smart Shutter (Scene Mode)  
Z
oom ............................................24, 31, 65  
Face Self-Timer .....................................62  
Smile .....................................................60  
Wink Self-Timer .....................................61  
Snow (Scene Mode) .................................56  
Software  
DIGITAL CAMERA Solution Disk ............2  
Software Guide .......................................2  
Transferring Images to a Computer ......34  
Sound Settings .........................................48  
T
Terminal ....................................36, 114, 132  
Time Zone ..............................................142  
Toggle .......................................................14  
Tone (White Balance) ...............................76  
Touch Actions .........................................113  
175  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
176  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
177  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
178  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
179  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disclaimer  
Reprinting, tranmittinor storing in a retrieval system any part of this  
guide without the pmission of Canon is prohibited.  
Canon reserves the right to change the contents of this guide at any  
time without prior notice.  
Illustrations and screenshots in this guide may differ slightly from the  
actual equipment.  
Every effort has been made to ensure that the information contained in  
this guide is accurate and complete. However, if you notice any errors  
or omissions, please contact the Canon customer service center  
indicated on the customer support list included with the product.  
The above items notwithstanding, Canon accepts no liability for  
damages due to mistaken operation of the products.  
CDP-E087-020  
© CANON INC. 2010  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Surge Protector F6H400ukUSB User Manual
Black Decker Toaster T270 User Manual
Boston Acoustics Car Speaker MCS 130 User Manual
Briggs Stratton Pressure Washer 100000 User Manual
Cabletron Systems Switch MICROMMAC User Manual
Canon Camera Flash 577 G User Manual
Canon Copier B75 User Manual
Canon Printer 6226B002 User Manual
CBM America Printer iDP3240 User Manual
Char Broil Charcoal Grill 463262911 User Manual