Shielded Metal
Arc Welder
TM
BUILT TO LAST
Additional Model Instructions
Addendum to Owner’s Manual
Model WS090001AV
Description
Thank you for purchasing the
Campbell Hausfeld 70 amp Arc Welder,
Model #WS090001AV. This instruction
sheet is to be used in conjunction with
the standard owner’s manual included
with the welder (IN198904AV). Please
refer to this sheet for WS090001AV
assembly instructions.
Please read all
warning instructions in
the owner’s manual
before operating.
Components
The WS090001 comes with the
following additional equipment:
•
•
Automatic amperage adjustment -
low position for 1/16” rods and
high position for 5/64” rods--for
ease of use.
Cable storage clips (shown in
Handle Assembly) for safer storage
of welding cables.
Handle Assembly
1. Align the end holes on the handle
with the holes on top of the welder,
IN170138AV 2/99
© 1999 Campbell Hausfeld/Scott Fetzer
|