TM
WARRANTY
TM
The CH Fighterstick USB is warranted to the original purchaser to be
free from defects in materials and workmanship for a period of two(2)
years from the date of purchase. During this warranty period
CH PRODUCTS will, at its option, repair or replace, at no charge, any
component determined to be defective.
The liability under this warranty is limited to the repair or replacement
of the defect or defective part(s) at our factory, and does not include
shipping expenses.
This warranty does not apply if, in the opinion of CH PRODUCTS, the unit
has been damaged by accident, abuse, improper usage, or as a result of
modification or service by anyone or anything other than CH PRODUCTS.
NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT
NOT LIMITED TO IMPLIED WARRANTIES OF SALABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
Fighterstick USB
Congratulations on your purchase of the CH Fighterstick USB! We are confident
that you'll find it to be one of the most durable and precise joysticks you have
ever owned. It was designed and manufactured in the U.S.A. with the same
strict quality standards you have come to expect from CH Products. So get ready
and strap yourself in, for you are about to experience a whole new level of
controller realism.
QUICK START: How to Install the CH FIGHTERSTICK USB
INTRODUCTION
REQUIREMENTS
CH PRODUCTS IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may have additional
rights which vary from state to state.
- IBM Compatible PC running Windows 98, 98 SE, ME, 2000, or XP
- One open USB port (one additional port for each additional USB device)
- USB compatible software
- Direct X 7.0a or later.
To obtain warranty services contact CH PRODUCTS at 760-598-7833 to
receive an RMA (Return Merchandise Authorization) Number and shipping
instructions.
WINDOWS 98/ME INSTALLATION
1. With the computer booted up fully to the Windows desktop, insert the CD
that was included with your stick.
The enclosed software is made available and without warranties of ANY
kind. All warranty claims made on CH PRODUCTS relating to defects which
may be present are expressly excluded where this is legally permissible.
CH PRODUCTS assumes no liability for the correctness, precision, or
currency of the software or its accompanying documentation, nor for the
suitability of the software for a specific purpose for normal market quality.
The risk relating to usability of the running characteristics and the
accompanying hardware lies with the user of the software. CH PRODUCTS
shall not be liable for functional capability in a multiple users association,
content, or performance of the software. The user shall bear all costs for
correction of defects, costs for maintenance, repair or improvement and not
CH PRODUCTS, its dealers, distributors, representatives, or employees.
2. Install the CH Control Manager from this disk.
3. Once the CH control Manager is installed, reboot the computer (The Control
Manager may prompt you to do this, however if it does not, reboot the system
manually.)
4. Once the computer is booted back up and on the Windows Desktop, plug in
the CH Fighterstick into an open USB port.
5. A New Hardware Detection window should appear.
6. Select Search for the Best Driver (recommended) then click Next*
7. Click Next again*
8. It may now ask you to insert your Windows CD. Place your Windows CD
in the CD drive and click OK (If it says it can not find a certain file, Click Browse.
Point it to the folder on your Windows CD called Win 98 or Win 9X then click OK)*
9. Click Finish*
10. You can test your Fighterstick in Windows Gaming Options. Gaming Options
can be accessed by clicking Start, Settings, Control Panel, then Gaming Options.
11. Once in Gaming Options, double click on the Fighterstick to access the
Windows controller test screen.
12. To calibrate the Fighterstick open the CH Control Manager and click on the
"Calibrate Controllers" icon . Select the Fighterstick, click OK, and follow the
on-screen instructions.
*These may not appear in Windows ME
Windows® 95/98/ME/2000/XP are registered trademarks of the Microsoft Corporation
P/N: 800-423 (v3.1)
© 2008 By CH Products (01/22/08/VS)
Download from Www.Somanuals.com. All Manuals Search And Download.
|