HCC310 Domino Ceramic
Griddle
Manual for Installation, Use and Maintenance
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear Customer,
Thank you for choosing one of our products.
The warnings and tips given below are intended to pro-
tect your safety and that of others. They will also help you
make the most of your appliance.
Keep this booklet in a safe place. It will be useful if you, or
anyone else, have any questions about use of the appli-
ance.
This appliance must only be used for the purpose
for which it was designed, i.e. for cooking foods.
Any other use should be considered incorrect and
therefore dangerous.
The manufacturer declines all responsibility for
damage caused by improper, incorrect or
irresponsible use of the appliance.
CE Declaration of conformity
ꢀ
ꢀ
ꢀ
This hob is intended to come into contact with food products and conforms with
European Directive 89/109/EEC.
This hob has been designed for use only as a cooking appliance. Any other use (e.g.
heating rooms) should be considered incorrect and therefore dangerous.
This hob has been designed, constructed and put on to the market in conformity
with:
- Safety requirements of the "Low Voltage" Directive 73/23/EEC;
- Protection requirements of the "EMC" Directive 89/336/EEC;
- Requirements of Directive 93/68/EEC.
Rating Plate
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT WARNINGS AND TIPS
ꢀ
When unpacking the appliance make sure that it is not damaged. If you have any
doubts, do not use the appliance but consult your supplier or an engineer.
ꢀ
The packing materials (plastic bags, expanded polystyrene, nails, bands etc.) must
not be left within easy reach of children, because they are a possible source of dan-
ger.
ꢀ
ꢀ
The packaging material is recyclable and is marked with the recycling symbol
.
Do not try to alter the technical properties of the appliance, because this could be
dangerous.
ꢀ
ꢀ
ꢀ
The manufacturer cannot be considered responsible for damage caused by
improper, incorrect or irresponsible use of the appliance.
Before disposing of any unwanted appliances it is recommended that all potentially
hazardous parts be made harmless.
The appliance should be installed and all the electrical connections made by a
qualified engineer in compliance with local regulations in force and following the
manufacturer's instructions.
ꢀ
During and after use of the cooktop, certain parts will become very hot. Do not
touch hot parts.
ꢀ
ꢀ
ꢀ
Keep children away from the cooking hob when it is in use.
After use, ensure that the knob is in the off position.
Some appliances are supplied with a protective film on steel and aluminium
parts. This film must be removed before using the hob.
ꢀ
Do not carry out cleaning or maintenance operations on the appliance without
having previously disconnected it from the electric power supply.
WARNINGS FOR THE USE OF ELECTRICAL APPLIANCES
When using any electrical appliance some important rules must always be followed.
In particular:
ꢀ
ꢀ
ꢀ
do not touch the appliance with wet or damp hands or feet
do not use the appliance with bare feet
this appliance should only be used by responsible adults.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceramic Griddle
Figure 1
1
2
3
FEATURES
- Electrical insulation Class I.
COOKING POINT
1. Hot plate - 1300 W
CONTROL PANEL DESCRIPTION
2. Hot plate control knob
3. Hot plate control lamp
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of Ceramic Griddle
Figure 2
HOW TO USE THE COOKER
TOP
The griddle reaches the working
temperature very quickly and can grill
any food, without fat and oil, directly
on the radiant zone's glass-ceramic
surface.
Operation of the radiant zone is
controlled by a continuous
12-position power regulator.
The signal lamp lights up when the
griddle is ON.
USING THE GRIDDLE FOR
THE FIRST TIME
ꢀ Remove the adhesive film which
protects some parts.
ꢀ Remove any residual glue carefully,
without using abrasive substances,
to avoid scratching the surfaces.
ꢀ Clean the cooking surface carefully.
ꢀ Switch the griddle on by turning
the power setting knob to the
maximum position (11-12) for
about 15 minutes to remove
residual working greases.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
USE OF THE GRIDDLE
ꢀ Before cooking make sure that the
radiant zone is clean.
Caution!
The griddle becomes very hot
during use and remains very hot
even after it is switched off.
Keep children well out of reach.
ꢀ Switch the griddle on by turning
the knob to position 12.
ꢀ Preheat until the cooking surface
becomes red.
ADVICE FOR THE SAFE
ꢀ Then turn the knob to the position
required. The numbers from 1 to
12 indicate the working positions
with temperature increasing as the
number increases.
USE OF CERAMIC GRIDDLE
ꢀ Do not lean on the cooking zones
when they are switched on.
ꢀ Do not put aluminium foil or plastic
objects on the cooking zones when
they are hot.
ꢀ Place the food on the radiant zone
and check the cooking by eye.
ꢀ Turn off the griddle by turning the
knob to position “0”.
ꢀ Do not leave objects of any type on
the surfaces made of ceramic, glass
or similar fragile material.
ꢀ As the radiant zone remains hot for
some time after the hob is
switched off, turn the zone off a
few minutes before the end of
cooking.
ꢀ Remember that the cooking zone
remain hot for some time after it is
switched off (about 30 min.).
ꢀ Follow the cleaning instructions
carefully.
The residual heat will complete the
cooking.
ꢀ If you note a crack in the cooktop,
switch the appliance off immediately
and call the After-Sales Service.
ꢀ Do not use the griddle for
more than 30 minutes.
TIPS FOR GRILLING:
ꢀ Preheat the radiant zone sufficiently
to obtain quick and uniform
cooking.
ꢀ Do not pour water on the cooking
surface when it is switched on or
still hot.
ꢀ If cooking very fatty foods, leave the
griddle switched on for a few
minutes after cooking is finished, to
burn off the fatty residues.
Do not scratch the cooktop with
cutting or sharp objects.
Do not use the cooktop as a
work surface.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Maintenance
CLEANING THE CERAMIC
GRIDDLE
Make sure that the cooktop is
switched off before cleaning it.
GENERAL TIPS
ꢀ Before you begin cleaning, you
must ensure that the hob is
switched off.
ꢀ It is advisable to clean when the
appliance is cold, especially when
cleaning the enamelled parts.
ꢀ Remove any encrustation.
ꢀ Remove dust with a damp cloth.
ꢀ Avoid leaving alcaline or acidic
substances (lemon juice, vinegar,
etc.) on the surfaces.
ꢀ Avoid using cleaning products with
a chlorine or acidic base.
ꢀ Detergents can be used, but they
must not be abrasive or corrosive.
ꢀ Any remaining detergent must be
completely removed with a damp
cloth.
ꢀ Do not use a steam cleaner because
the moisture can get into the
appliance and make it unsafe.
ꢀ Do not put any objects on the
cooktop which can melt with heat,
such as plastic objects, aluminium
foil, sugar or sugar products.
ꢀ If any object melts on the cooktop,
remove it immediately (while the
cooktop is still hot) using a speaal
scraper, to prevent any irreversible
damage to the glass ceramic
surface.
ENAMELLED PARTS
ꢀ All the enamelled parts must be
cleaned with a sponge and soapy
water only or other non-abrasive
products.
ꢀ Do not use knives or sharp objects
which could damage the cooktop
surface.
ꢀ Dry preferably with a chamois
leather.
If acid substances such as lemon
juice, tomato conserve, vinegar etc.
are left on the enamel for a long
time they will etch it, making it
opaque.
ꢀ Do not use abrasive sponges or
pads which could irreversibly
damage the glass ceramic surface.
STAINLESS STEEL PARTS
ꢀ Clean with special products which
are available on the market.
ꢀ Dry preferably with chamois leather.
.
CONTROL KNOB
ꢀ The control knob may be removed
for cleaning but care should be
taken not to damage the seal.
CAUTION: Any abrasive substan-
ces and non-neutral detergents
are absolutely not to be used as
these can cause permanent dama-
ge to these elements.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instruction
Figure 3
TECHNICAL INFORMATION
FOR THE INSTALLER
Before installing the cooktop, remove
the protective film.
This cooktop can be built into a
working surface 30 to 40 mm thick
and 600 mm deep.
In order to install the ceramic griddle
into the kitchen fixture, a hole with
the dimensions shown in fig. 3 has
to be made, keeping in considera-
tion the following:
ꢀ within the fixture, between the
bottom side of the ceramic griddle
and the upper surface of any
other appliance or internal shelf
there must be a clearance of at
least 30 mm;
ꢀ the ceramic griddle must be kept
no less than 300 mm away from
any side wall;
Figure 4
ꢀ the rear wall must be at least 50
mm from the ceramic griddle and
must withstand a temperature of
150°C.
ꢀ there must be a distance of at least
650 mm between the hob and
any wall cupboard or extractor
hood positioned immediately
above (see fig. 4)
ꢀ the coatings of the walls of the
unit or appliances near the
cooktop must be heat resistant (“X”
protection against heating in
compliance with standards EN
60335-2-6).
ꢀ Do not instal the appliance near
inflammable materials (eg.
curtains).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5
FASTENING THE
APPLIANCE
Each ceramic griddle is supplied with a
set of tabs and screws fasten it on
units.
A
A
ꢀ Cut the unit (as shown in figure
A
3).
A
ꢀ Stretch gasket “D” over the edge of
the hole made, being careful to
overlay the junction edges.
ꢀ Turn the ceramic griddle over and
put tabs “A” into the mountings,
only tighten screws “B” a few turns
(fig. 6).
Make sure that the tabs are mounted
correctly as shown in the figures.
Turn the tabs so that the cooktop
can be put into the hole.
Figure 6
ꢀ Put the cooktop into the hole cut
into the unit and position it
correctly.
D
ꢀ Put tabs “A”; into place, tooth “C” of
the tabs should go into the hole (fig.
6).
C
ꢀ Tighten screws “B” until the cooktop
is completely secured.
ꢀ Using a sharp tool cut off the part of
gasket “D” which protrudes from the
cooktop.
B
A
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Section
1) The wire which is coloured green and
IMPORTANT: Installation must be
carried out according to the manu-
facturer's instructions. Incorrect
installation may cause harm and
damage to people, animals or prop-
erty, for which the manufacturer
accepts no responsibility.
yellow must be connected to the ter-
minal marked E (Earth) or
coloured Green.
2) The wire which is coloured blue must
be connected to the terminal marked
N (Neutral), or coloured Black.
3) The wire which is coloured brown
must be connected to the terminal
marked L (Live), or coloured Red.
DETAILS
ꢀ Connection to the electric power sup-
ply must be carried out by a qualified
technician and following the appro-
priate safety regulations;
ꢀ The power supply cord must not
touch against any hot surfaces and
must be placed so that its tempera-
ture does not exceed 75°C at any
point along its length.
ꢀ Before carrying out the connection to
the power supply, the voltage rating
of the appliance (stamped on the
appliance identification plate) must
be checked for correspondence to
the available mains supply voltage,
and the mains electric wiring should
be capable of handling the appli-
ance’s power rating (also indicated
on the identification plate);
ꢀ After having installed the appliance,
the power switch or power plug
must always be in a accessible posi-
tion.
N.B. For connections to the mains
power supply, never use adaptors,
reductions or multiple power
points as these may overheat and
catch fire.
ꢀ If the hob is supplied without plug, fit
a standard plug which is suitable for
the power absorbed by the appliance
and in conformity with the local rules
in force.
In the event that installation should
require modifications to the mains sup-
ply wiring system, it is recommended
that a qualified technician be called to
carry out substitution.
The technician will also have to verify
that the cross-section of the electric
cables on the power point match the
appliance’s power rating.
ꢀ The plug must be put into a socket
connected to the earth system in
compliance with safety rules.
ꢀ This appliance can be connected
directly to the mains, using fixed
wiring via
a
DOUBLE POLE
SWITCHED FUSED SPUR OUTLET (13
amps. fuse).
If the hob surface is cracked dis-
connect the appliance from the
mains.
ꢀ As the colours of the wires in the
mains lead for the appliance, may not
correspond with the coloured mark-
ings identifying the terminals in your
spur box, proceed as follows:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 7
Before carrying out any work on
the electrical section of the appli-
ance, it must be disconnected
from the mains.
REPAIRS
A
Replacing the supply cable
Turn the cooktop over and unhook the
terminal board cover by inserting a
screwdriver into the two hooks “A”.
Open the cable gland by unscrewing
screw “F”, unscrew the terminal screws
and remove the cable.
Figure 8
The new supply cable, of suitable type
and section, is connected to the termi-
nal board following the diagrams
shown below.
F
SECTION OF THE SUPPLY
CABLE
Use H05RR-F cables
230 V ~
50/60 Hz
section: 3 x 1 mm2
or
3 x 1,5 mm2
Figure 9
230 V
Connection to a good earth
wiring system is absolutely
essential.
The manufacturer accepts no
responsibility for any inconve-
nience caused by failure to com-
ply with this rule.
L
1
N (L
2)
PE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceramic Griddle
Cod. 1101896
ß4
Download from Www.Somanuals.com. All Manuals Search And Download.
|