INSTRUCTION MANUAL
PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE
AND SAVE THIS MANUAL FOR FUTURE REFERENCE
Ver. 1.4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Unpacking ................................................................................. 4
Button Identification ............................................................... 5
Getting Started
Powering Your Radio ................................................ 6
Installing The Batteries ............................................ 7
Display Panel ............................................................. 8
Setting The Clock ...................................................... 9
Setting The Alarm ............................................... 9-10
Snooze Feature ....................................................... 10
Sleep Timer ............................................................... 10
Radio Operation
Tuning ........................................................................ 11
Weather Alert System ...................................... 12-13
2-Meter Ham (VHF) ............................................. 14-15
Display Light ........................................................... 16
Lock Switch ............................................................. 16
Headphone Jack ..................................................... 16
Reset Button ............................................................ 16
Audio & Recording Jacks ............................... 17-18
Setting The Timer ............................................. 18-19
Specifications ............................................................... 20-21
Accessories ........................................................................... 22
Troubleshooting Guide ................................................... 23-24
Radio Noise Troubleshooting ............................................. 25
Listening Tips ...................................................................... 26
Safety Instructions ......................................................... 27-28
Personal Station Log ............................................................ 29
2-Meter Ham Frequency Log .............................................. 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Ꮨ
ƽ
Please read IMPORTANT SAFETY
INSTRUCTIONS on pages 27 - 28
before use. It is important to read
and understand all instructions.
WARNING: TO PREVENT FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Ꮨ
ƽ
THE LIGHTNING
CAUTION: TO REDUCE THE
RISK OF ELECTRIC
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOU OF IMPORTANT
INSTRUCTIONS
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOU OF “DANGER-
OUS VOLTAGE”
SHOCK, DO NOT REMOVE
THE RADIO BACK. NO
USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
ACCOMPANYING THIS
RADIO.
INSIDE THE RADIO.
For your future reference:
Date of purchase
Serial No.
(found inside battery compartment)
Name & address of dealer
Unpacking
The box should contain the CCRadio2, the power cord and this manual.
If anything is missing or damaged, please contact your dealer immedi-
ately. We recommend you keep the box in the unlikely event your radio
will need servicing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Identification
14
17
16
15
13
12
18
11
4
3
10
9
8
2
1
5
6
7
10) Lock Switch
1) Clock Set
•
11) Tuning Knob / Squelch Set
2) Alarm Set
•
•
12) Power or Sleep Timer
3) Timer Set
•
•
13) Display Light
4) Display Clock or Frequency
5) Bass Control
14) Telescopic Antenna
15) Memory (1-5)
6) Treble Control
16) Weather Alert (3 Modes)
7) Tuning / Time Set (Up/Down)
8) Headphone Jack
17) Band or AUXILIARY
•
18) Weather Alert Light
9) Volume Control
•
Note: When you see a “ ” next to a button on the radio, it means you must
•
press and hold the button down for two seconds to activate the function.
The appropriate symbol will then appear on the display along with sounding
a “beep”. If the radio is turned off, the beep volume is significantly reduced.
To deactivate the Alarm and Timer functions, press and hold the but-
ton until it beeps again and the symbol disappears from the display.
(Please see Display Panel symbols on page 8.)
CCRadio2
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
POWERING YOUR RADIO
Before powering your radio be sure to read
the Safety Instructions on pages 27 and 28.
ƽ
The CCRadio2 will run on (4) “D” size NiMH or alkaline batteries or on
120V AC house current using the included power cord. Batteries are
optional. The batteries are necessary to retain the timer, clock, and
memory settings if the power cord is removed from the radio for more
than three minutes.
Rechargeable batteries work well in this radio. The Battery Power Level
Indicator will be lower because the total voltage is lower for recharge-
able batteries.
AC OPERATION
Before you plug the AC cord into the radio be sure the AC voltage is
120Volts/60Hz. If you have batteries in the radio and you use the AC
power cord, the batteries will automatically be disconnected.
NOTE: If you remove the power cord without turning the radio OFF, the
radio will automatically revert to the batteries.
Insert the plug on the end of
the supplied power cord into
the AC power jack on the
back of the radio.
Page 6
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
INSTALLING THE BATTERIES
1) Position the radio face down on a soft surface to protect it.
2) Remove the battery compartment cover.
3) Insert the (4) “D” cell batteries into the compartment as indicated in
the drawing below. Be sure the negative (-) end is against the
spring. Refer to the drawing below to insure correct installation of
your batteries.
4) Replace the battery cover. You are now ready to operate your radio.
Remove battery cover by pressing
AC power cord
both clips at the same time towards
plugs in here.
the bottom of the radio.
Second
Battery
First Battery
Third Battery
Fourth
Battery
BATTERY REPLACEMENT
The battery indicator will display the battery level for approximately
seven seconds when the radio is switched off. After removing dead
batteries for replacement, you have approximately three minutes to
replace the batteries before your clock and memory information will be
lost (if the radio is not plugged in).
This flashing symbol means
the batteries need replacing.
This symbol means
the batteries are full.
This symbol means
batteries are low.
CCRadio2
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
DISPLAY PANEL
1
2
3
4
5
15
14
6
13
12
7
8
11
10
9
1) Weather Alert Modes
2) Memory Location (1 - 5)
3) Key Lock On/Off
8) Timer Active Indicator
9) Clock Seconds
10) Frequency/Clock Display
11) Alarm Status and Type
12) AM/PM Indicator
4) Sleep Timer/Snooze Status
5) Battery Symbol
13) Indicates Band In Use
14) AUX IN Indicator
6) Battery Power Level Indicator
and Signal Strength Meter
15) Stereo Reception
7) Squelch Indicator
Page 8
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
SETTING THE CLOCK
Please read this entire section carefully before you start. Set the
time with the radio off. You must go through the steps listed below
without stopping for more than 15 seconds at any given time or you will
have to start over. (Refer to page 5 for Button Identification.)
1) Press the Clock Set Button. The hour digit will flash.
2) Using the Up/Down Tuning Button, select the appropriate
hour digit and AM or PM.
3) Press the Clock Set Button again to select the minutes digits, the
minutes digits will flash. Use the Up/Down Buttons to adjust the
minutes to the appropriate time.
4) You must press the Clock Set Button again to complete the time
setting. This also sets the seconds to “00”.
SETTING THE ALARM
There are two different alarm modes on the CCRadio2. You can choose
to wake up to the radio or to a tone. You can set the alarm with the
radio on or off. If the radio is off, the beep volume is significantly reduced.
To set the type of alarm:
Press and hold the Alarm Button until you hear a
beep and see one of these symbols flashing on
the display.
To wake with the radio: While Alarm is flashing on
the display, press the Clock Set Button until you see the symbol shown
to the right. When the alarm goes off the radio will play the last station
selected at the same volume level last set.
To wake with a multi level tone: While Alarm is flashing,
press the Clock Set Button until you see the symbol shown to the right.
To shut off the alarm function: Press and hold the Alarm Button until
you hear a short beep and the alarm symbol disappears.
To set the alarm time:
1) Press and hold the Alarm Button, the hour digit and Alarm
symbol will flash.
2) Using the Up/Down Tuning Button, select the appropriate
hour.
3) Press the Alarm Button again. Use the Up/Down Tuning Buttons
to adjust the minute to the appropriate time.
4) Press the Alarm Button again to complete the alarm setting.
CCRadio2
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Notes on the Alarm
You can also set the alarm time immediately after selecting the radio or
buzzer alarm as described on page 9.
To stop the alarm from going off every day, press and hold the Alarm
Button until ALARM disappears from the display.
Once the alarm is set, it will automatically go off the next day at the same
time. Use the Power Button to shut off the alarm until the next day.
If the radio alarm is selected, tune the radio to your favorite station and set
the volume before turning your radio off for the day. When the alarm acti-
vates, the radio will play the last station listened to.
The tone alarm is called HWS or Humane Wake (if that is possible)
System. The alarm tone beep will increase in volume every 15 seconds for
one minute followed by one minute of silence before repeating the cycle.
The alarm system will sound for one hour unless turned off by pressing
the Power Button.
SNOOZE FEATURE
When the buzzer alarm is sounding, if you press any button except the
Power Button, the alarm will temporarily stop for five minutes. The little Zs
and Alarm symbol will flash on the display (above the little bed) while the
radio is in snooze mode. To shut off the alarm and snooze feature press
the Power Button.
SLEEP TIMER FEATURE
Your CCRadio2 is equipped with a Sleep Timer that enables the radio to
continue playing for up to 120 minutes after activation, then shuts the
radio off. Selectable times are 60, 45, 30, 15, 120, and 90 minutes.
Press and hold the Power
/
Sleep Button until the pictograph of
a person in bed and the numbers 120 are displayed.
Holding the Power Sleep Button down will reduce the time in steps,
/
showing times of 60, 45, 30, 15, 120, and 90 minutes. If you miss the time
you want, simply continue holding the button until the desired time shows
on the display. Release the button. Now the pictograph of the person in
bed will appear on the display. The radio will then shut off after the set
amount of time. To deactivate the Sleep Timer, simply shut the radio off
using the Power Button.
Page 10
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
TUNING
The CCRadio2 features four bands: AM / FM / 2-Meter Ham (VHF) and
Weather.
Manual Tuning
1) Press the Power Button to turn on the radio.
2) Select the band by pressing the Band Button.
3) A single press of the Up or Down Tuning Buttons will
change the frequency up or down for AM, FM and Ham
(VHF) bands, and channel up or down for Weather.
Each press of Up and Down Tuning Buttons will change the frequency
by 10 kHz in AM mode, 100 kHz in FM mode, and 5 kHz in Ham (VHF).
Scan Tuning
Same as above except press and hold the Tuning Up or Down
Button for more than 0.5 second. The radio will scan and stop
automatically when it finds an active station. The Scan Tuning
will not work on the weather band. It may also stop scanning on strong
interference or noise. Press and hold again to resume. For 2-Meter
Ham scanning, please see page 14 for more advanced information.
Rotary Tuning
Rotating the tuning knob will change AM/FM/Ham (VHF) by frequency
and the weather band by channel.
Memory Tuning
Five stations may be stored into memory in
each of the four bands.
1) Tune to the station or channel you want to memorize.
2) Press and Hold the desired Memory Button for two seconds or
until you hear a beep. The station or channel is then memorized.
The display will show the memory number.
To recall the memorized station, select the correct band and briefly
press and release the Memory Button. The radio will instantly tune to
the station stored in memory.
®
Note: The CCRadio2 automatically fine tunes the Twin Coil Ferrite AM
Antenna for a few seconds after a station is changed in AM mode. The
“signal” icon will flash during this time.
CCRadio2
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
WEATHER ALERT SYSTEM
The WEATHER ALERT modes on the CCRadio2 can alert you to spe-
cial weather related emergencies. During an emergency or weather-
related hazard, NOAA issues an emergency tone that will set off an
audible and/or visual alarm on the radio.
NOTE: Hazard warnings are not available in all areas.
There are seven standard NOAA weather channels used in the US and
Canada. This radio receives broadcasts up to 40 miles from transmitting
stations.
1) To listen to the standard NOAA weather channels, turn the radio on,
press the Band button until WX shows on the display. The telescopic
whip antenna may need to be fully extended and in the “up” position
to receive a station clearly.
2) The channel number of the weather station is shown on the display.
Pressing the Tuning Up or Down Buttons will toggle you through the
seven programmed channels. There should be one or more weather
service stations broadcasting in your local area. You will hear a
report that is updated usually once or more per day for your area. If
there is a severe weather or weather-related emergency, NOAA will
update the weather broadcast more frequently. If there is a weather
emergency, the NOAA will issue an alert tone.
After locating and tuning in your weather station the radio can now be
placed into WEATHER ALERT mode. The WEATHER ALERT mode
enables you to listen to your favorite AM or FM station or turn the radio
off, and still receive an alert signal warning you of a special emergency.
There are three active WEATHER ALERT modes on the CCRadio2.
NOTE:
1) When activated, the WEATHER ALERT consumes power even when
the radio is turned off.
2) Be aware that if you are not using AC power the WEATHER
ALERT will completely drain your batteries. If your batteries are
dead and AC power is off, the WX Alert Alarm will not work.
Setting the Weather Alert
1) To place the radio in WEATHER ALERT mode, press and hold the
Weather Alert Button for two seconds: You will hear a short beep
and see the alert symbol, shown on page 13 (top right), on the
display. When the radio is off, the beep volume is significantly reduced.
Page 12
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
This is WEATHER ALERT mode with flashing light
only (no Alarm). If NOAA issues a weather related
emergency, the radio will automatically alert you with
a small flashing light near the top of the radio. The Alert light
continues to flash until any button is pushed.
2) To access the second mode, (WEATHER ALERT with NOAA Audio)
.
Press and hold the WEATHER ALERT Button again for two seconds
until you hear a long beep. The symbol shown at
right will be displayed in this mode. In this mode,
if the NOAA alert tone is issued, the red light
flashes and the radio switches to Weather Audio automatically.
3) To access the third mode, (WEATHER ALERT with flashing light and
siren). Press and hold the WEATHER ALERT
Button again for two seconds until you hear a
double beep. The symbol shown at right, will
appear and the red light near the top radio comes on continuously.
In this mode, if the NOAA alert tone is issued, the red light on the
top of the radio flashes and a siren turns on for up to 1 minute. In
this mode, when the siren is active, pressing any button on the radio
instantly turns the radio to the Weather Audio and cancels the siren.
SPECIAL NOTE: If you have the headphones plugged in and a weather
alert is issued, the audio to the headphones will be cut-off and the siren
will sound through the radioʼs speaker.
Turning Off the Weather Alert
Press the WEATHER ALERT Button again for two seconds:
The alarm goes off and is inactive. The ALERT symbol will
disappear from the display.
In any of the active WEATHER ALERT modes, the weather receiver
stays on and listens for an emergency tone issued from NOAA in case
of emergency.
You may get a periodic test tone from the NOAA that will cause an
unexpected alarm on your CCRadio2. This tone is only a test and will
happen periodically, usually every Wednesday at noon, or whenever the
agency decides to test their emergency alert system. Simply pressing
any button on the receiver will shut the alert tone off. After an alert has
been issued, the WEATHER ALERT light and/or siren will stay on for
one minute or until you turn it off by pressing any button.
CCRadio2
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
2-METER HAM (VHF) BAND (144 TO 148 MHZ)
The 2-Meter Ham Band is a popular radio band used by amateur radio
operators for civil defense. After a hurricane, earthquake or other
calamity, 90% of emergency coordination at the local level takes place
on this band. Listening to this band during an emergency can be
extremely valuable and even life saving. For most people, the
CCRadio2 will probably be their first experience with Ham radio.
We have preprogrammed some of the most popular frequencies into the
five memories of the CCRadio2. Different frequencies may be active at
your location, other than those preprogrammed into the memories. The
following are the frequencies and memory locations as they were origi-
nally preprogrammed:
1) 146.520
2) 146.760
3) 146.880
4) 146.940
5) 147.000
You can program your frequencies of interest into a memory location at
any time.
To scan the five memory channels when in 2-Meter Ham,
momentarily press both of the Up and Down Tuning Buttons
at once, the radio will scan the memories and automatically
stop when it detects a voice transmission. Raise the telescopic antenna
up fully in a vertical position. It is best to set the squelch level prior to
scanning the memory stations. See “Setting the Squelch” below.
SETTING THE SQUELCH
Background noise or static is present to some degree at every location
and on every frequency of the 2-Meter Ham Band. This is a normal con-
dition. If you set the squelch above the background noise level, the
radio will remain silent until a voice transmission is detected. It is best to
set the squelch as low as possible (to just before static is constant).
This way you can hear signals that may be weak. If you set the squelch
too high, you may miss some weak voice transmissions.
To adjust the squelch level, press and hold the main
Tuning Knob in for one second until the display changes.
Turn the Tuning Knob slowly clockwise from OFF
through 12 (increasing squelch) until the radio just becomes silent.
NOTE: Squelch operates on the 2-Meter Ham Band only.
Page 14
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
SEARCHING FOR A NEW ACTIVE FREQUENCY
At times, more frequencies will become active than have been prepro-
grammed into the radio. You can search the 2-Meter Ham band by
pressing the Up or Down Tuning Button and holding it
momentarily. You can also start scanning by pressing and
releasing the main Tuning Knob. The radio will begin search-
ing the entire 2-Meter Ham band until it finds an active frequency and
then it will stop. You may want to write down this frequency to keep
track of which frequencies are active. With time you may find a frequen-
cy of interest.
During non-emergency times, you can listen and learn more about the
Ham radio operators that live around you. After listening to them for a
time, you may find you would like to be a Ham, too. Joining requires
passing an entry level multiple choice test and purchasing reasonably
priced Ham radio equipment. The 2-Meter band is the most popular
place to start for a Ham. You can contact the American Radio Relay
League (ARRL) toll free at 888-277-5289 or at arrl.org to find out what
you need to learn and the nearest testing location.
C. Crane salutes every Ham who has volunteered to be a part of emer-
gency radio operations.
CCRadio2
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
DISPLAY LIGHT
Display Light on AC Power
When the radio is plugged into AC power, the display light will always
be on unless you turn it off. The special green LED bulbs last about
100,000 hours and use very little electrical energy. The display light has
three light levels. If you want to change the light level or turn off
the display light, press and release the Light button until you
reach the desired level. Refer to page 5 for button identification.
Display Light on Batteries
When batteries are used, the display light can be turned on by pressing
the light button. The display light automatically goes off 2 minutes after
the last time you press any button.
LOCK SWITCH
The Lock switch can be used when transport-
ing the radio to prevent accidentally turning it
on. When the switch is pushed up you will see
the Lock symbol
appear on the display.
Lock
Switch
It can also be used to disable all functions of
the radio when it is turned on. Push the
switch down to release the lock for
normal operation.
Headphone
Jack
HEADPHONE JACK
Right Side View
You can use a stereo or mono headphone with a 3.5
mm plug. When you insert the headphone plug, the speaker is discon-
nected. This radio delivers FM in stereo through the headphones.
RESET BUTTON
Once in a while glitches may occur on any portable digital radio. This
can be caused by static electricity, unusual key strokes or a power dis-
ruption. If this happens, use the end of a paper clip or ball point pen and
push it into the hole briefly to reset the radio. You will lose the clock
time and all the stations stored in memory when the radio is reset.
Reset Button
Bottom View
of CCRadio2
Page 16
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
AUDIO & RECORDING JACKS
The jacks on the back left side of the radio are for audio input (AUX IN),
audio output (LINE OUT) and a timer activation switch
.
RECORDING ACCESSORY
VersaCorder
AUX IN Jack
Designed to
work with the
Timer Activation Switch
LINE OUT Jack
CCRadio2.
Record up to 4 hours on
one side of a cassette.
(See page 22 for details.)
AUX IN Jack
The green jack, labeled AUX IN, is used to connect an external audio
source such as a CD Player or recorder, so you can listen through your
CCRadio2ʼs speaker. To do this, you will need the appropriate patch
cord. (Refer to page 22 for patch cord specifications).
Warning: If a “LINE OUT” is not available on your external audio
source, you can use the headphone jack. However, the volume
must be kept low or damage to the CCRadio2 may result.
1) Plug your patch cord into the LINE OUT or Headphone Jack of your
external audio source.
2) Plug the other end into the AUX IN jack on the CCRadio2.
3) With the power on, press and hold the Band/AUX Button until you
hear a short beep and AUX appears on the display.
4) Turn on your external audio source to hear the audio played
through the CCRadio2.
5) To turn the AUX off, press the Band/AUX Button again and the AUX
will disappear from the display.
NOTE: Volume can be controlled from the CCRadio2.
CCRadio2
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
LINE OUT Jack
The red jack, labeled LINE OUT, is used to output the audio from the
CCRadio2 to another device such as a recorder, your home stereo, or
some other unit. To do this, you will need an 1/8" stereo patch cord.
Note: The LINE OUT jack differs from a headphone jack because the
volume level of a headphone jack varies depending on the volume of
the radio. The LINE OUT jack has a set line level so the volume is con-
sistent no matter what the position of the volume knob.
1) Plug your patch cord into the LINE OUT jack on the CCRadio2.
2) Plug the other end of the patch cord into the LINE IN or AUDIO IN
of the device you want to send the audio to and you will hear the
radio through the other source. You can still listen to the CCRadio2
while using the LINE OUT jack.
Timer Activation Switch
The black jack labeled with this symbol
is for use with a recorder
that has a timer activated switch. You would use this switch if you want-
ed to do a timed recording. It is used in conjunction with the LINE OUT
jack. See your recorderʼs instructions to determine if this function will
work with your recorder.
SETTING THE TIMER
Please read this entire section carefully before you start. You must
go through the 3 steps listed below without stopping. If you stop
for more than 15 seconds, press and hold the Timer Button until
you hear a single beep. Then start at step one again.
Before you begin, program the stations that you will want to record into
memory. Refer to page 11 for instructions on programming memory pre-
sets. The timer has an ON TIME and an OFF TIME. You must set
both in order for the timer to work correctly.
STEP 1: TO SET THE ON TIME
1) Press and hold the Timer/Set Button until you hear a beep and see
the word ON, the hour digit and TIMER flash on the display.
2) Use the Tuning Up/Down Buttons to set the hour, verifying that the
time is set correctly for AM or PM as shown on the display.
3) Press the Timer/Set Button again so the minutes and the word ON
and TIMER flash on the display.
4) Use the Tuning Up/Down Buttons to set the minutes.
Page 18
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
STEP 2: TO SET THE OFF TIME
1) Press the Timer/Set Button again until the word OFF, the hour digit
and TIMER flash on the display.
2) Use the Tuning Up/Down Buttons to set the hour. Again, verify that
the time is set correctly for AM or PM.
3) Press the Timer/Set Button again so the word OFF and TIMER and
the minutes, flash on the display.
4) Use the Tuning Up/Down Buttons to set the minutes.
STEP 3: TO SET THE FREQUENCY
1) Press the Timer/Set Button again to select your desired frequency.
The word TIMER and the memory preset will flash on the display.
Using the Band Button, select the appropriate band [AM, FM, Ham
(VHF) or WX]. Press the memory button 1-5 that corresponds with
your desired station.
2) You must Press the Timer/Set Button again to complete the
setup.
The timer will go ON and OFF at the same time and same station
every day until you turn the timer off or reprogram it.
To Turn Off The Timer
If TIMER is showing on the display then the Timer is set. Press and hold
the Timer/Set Button until you hear a short beep and the word TIMER
disappears from the display.
NOTES ON THE TIMER
The timer can be used to play your favorite program every day.
To stop the timer from going off every day press and hold the
Timer/Set Button until you hear a short beep the word TIMER
disappears.
Once the timer is programmed, you may use your radio as normal. If you
are using the radio during a “timed” operation, the radio will automatically
switch to the programmed station, and turn off at the programmed OFF
time.
The word TIMER flashes while the radio is playing in Timer Mode.
CCRadio2
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
FREQUENCY COVERAGE
FM Band: 87.5 - 108 MHz Stereo
AM Band: 520 - 1710 kHz
Ham (VHF): 144 - 148 MHz
WEATHER BAND
Channel 1: 162.400 MHz
Channel 2: 162.425 MHz
Channel 3: 162.450 MHz
Channel 4: 162.475 MHz
Channel 5: 162.500 MHz
Channel 6: 162.525 MHz
Channel 7: 162.550 MHz
ROTARY TUNING KNOB RESOLUTION
AM - 1 kHz
Ham (VHF) - 5 kHz
WX - 1 Channel
FM - 50 kHz
POWER SOURCE
AC 120 Volts 60Hz
Batteries: (4) “D” size
POWER CONSUMPTION
AC Power:
8 Watts
Battery Power: 40-50 mA DC
AUDIO
10% THD at output power @ 1.8 Watt AC typical
@
0.9 Watt Battery
Speaker: 5", 4 Ohm, 6 Watts
ANTENNA
FM, Ham (VHF) and Weather Band: Telescopic whip antenna
AM Band: 1) Built-in Ferrite Bar - 7/16" dia x 8" long (200 mm)
2) External AM antenna directly wired through filter
network into RF front end.
DIMENSIONS
11" W x 6-1/2" H x 4" D (at the base)
WEIGHT
Approximately 3.8 pounds without batteries
Page 20
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUX IN JACK
300 - 1000mV RMS (line level) input from external audio source. Do
not overload.
LINE OUT JACK
300 - 1000mV RMS (line output)
TIMER ACTIVATION SWITCH
Low impedance, transistor driven switch. Used for operation of external
recording devices.
Note: Specifications are subject to change without notice.
CCRadio2
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Check with your dealer for the following accessories:
RECORDING DEVICES
VersaCorder
Dual speed tape recorder. Designed to work
with CCRadio2 with the Patch Cord below.
Record up to 4 hours on one side of a cas-
sette tape.
Item #VC
Patch Cords
3 x 1/8" Stereo Patch Cord at 40" long.
Item #VPC
CC Witness
MP3 RECORDER-Player with built-in AM/FM Radio.
Record radio shows from CCRadio2 or use the AUX IN
jack to use the CCRadio2 as an external speaker.
Item #CWT
AM ANTENNAS
Twin Coil Ferrite® AM Antenna
Can double daytime reception, reduce nighttime fade
out, and even eliminate heavy static and distortion.
Item #TCA
Terk AM Antenna
Improves AM reception. Can be used with or without
included wires.
Item #TR1
FM ANTENNAS
FM Reflect Antenna
Improve FM reception of portable and stereo
receivers. Can be shaped for best reception.
Item #FMW
Page 22
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
The CCRadio2 will not turn on and none of the buttons work:
The Lock Switch, located on the right side of the radio between the
tuning and the volume knobs, is in the up position. Push the switch
down to release the lock and resume normal operation of the radio.
(Please see Lock Switch on page 16.)
The CCRadio2 comes on by itself or changes to a different station
while I’m listening:
The Timer has been set. The word TIMER will appear in the display if
the Timer is set. To cancel the Timer setting, press and hold the
Timer/Set button until you hear a short beep and the word TIMER
disappears from the display.
My radio shuts off after just a few seconds:
Low batteries can cause this situation. Replace them with a new set of
batteries. If the radio is operating on the power cord, check for solid
connections at the wall outlet and the back of the radio. Also make sure
there is power at the wall outlet.
Stations won’t hold in memory:
The memory button settings are being overwritten. When recalling a
station from memory, if you hold the memory button down too long it will
program the current station over your previously stored station. To recall
a station that has been stored in memory, always press and release the
button quickly. To program a new station into memory, tune to the
desired station and then press and hold the memory button for two
seconds until you hear a beep. Also, please see the section on Memory
Tuning on page 11.
The AM reception is poor inside of my building:
Many building materials have adverse effects on AM band listening.
Brick, concrete, stucco, and aluminum siding all have a tendency to
absorb or reflect the AM signal. Spanish tiles or metal roofs are also
culprits. To test your AM reception, put batteries in your radio and take it
outside of the building, especially at night. If your reception is notably
stronger outside than inside the building, an external AM antenna may
be necessary to bring the signal into the building. See the AM Tuning
and Listening Tips section on page 26 for a quick and easy antenna.
CCRadio2
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
The best AM antenna made today for these buildings is the Twin Coil
®
Ferrite AM Antenna by C. Crane shown on page 22.
Poor reception on FM, Ham (VHF), or Weather band:
The CCRadio2 uses its telescopic, or “whip” antenna for FM, Ham
(VHF), and the weather bands. To improve reception of these bands,
fully extend the telescopic antenna. Reception of FM and weather
broadcasts is normally improved with the antenna extended straight up.
Note: The antenna must be fully extended to allow it to rotate. You can
also try a piece of any type of insulated wire about 36" long. Remove
about 1" of the insulation from one end of the wire. Wrap the bare wire
around the telescopic antenna or use an alligator clip. Try various orien-
tations of the wire and different heights of the telescopic antenna to
obtain the strongest signal. If you want an antenna that is pre-made, we
recommend the FM Reflect Antenna by C. Crane on page 22 for details.
Battery Power Level Indicator doesn’t show full charge when using
rechargeable batteries:
Rechargeable batteries will never show a full charge on your radioʼs
display. The CCRadio2 is calibrated to read the charge of your Alkaline
batteries, which is 1.5 volts at full charge. Rechargeable batteries, how-
ever, are fully charged at just 1.25 volts, and so your radio will show a
partial charge even if the rechargeable batteries have been fully
charged.
Page 24
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Noise Troubleshooting
AM RADIO NOISE PROBLEMS
AND POSSIBLE SOLUTIONS
If you hear an annoying buzz when listening to AM radio, itʼs most likely
radio noise. Here are some of the usual culprits:
• Dimmer switch (even in an adjacent room).
• Lights: Fluorescent light, "touch lamp" type fixtures, automatic
night lights, motion-activated outdoor lights, dying bulbs,
blinking bulbs.
• Nearby television or computer.
• Electronic bug and pest controllers.
• Faulty electrical switch.
• Radio scanners.
• Dirty insulators on a nearby power pole.
• Electric blanket.
• Smoke detectors that run from an AC current (battery operated
units are OK).
Now what can you do about it?
• Turn off the circuit breakers to see if the noise stops, and if the
source comes from inside your house. Turn off one circuit at a
time to isolate the source of the noise.
• Using a battery-operated radio, check if the interference comes
from the AC 120V line, through the air, or both. To locate the
direction of the noise, turn the radio until you hear the loudest
noise. The front and the back of the radio will point to the noise
origin.
• If the noise comes from outside, carry the radio around the
neighborhood to check for the origin of the noise. Ask your
neighbors if they hear the same noise.
• If you suspect a power pole, call the utility company. Dirty
power pole insulators are sometimes a cause of hard-to-find
radio interference.
• Sometimes grounding can greatly reduce the hum from AC line
noise. Unfortunately, most radios do not have a ground
connection. Finding a good earth ground may also be difficult.
For more detailed information, please visit www.ccrane.com/radionoise
CCRadio2
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
AM Tuning & Listening Tips
Most portable radios including the CCRadio2 have an internal AM
antenna. Best performance is achieved when the radio is swiveled on
its base for maximum signal pickup from the transmitting tower. This
same technique can be used to help nullify unwanted signals or radio
noise. Experimentation is the best way to see how it works for you.
Top View CCRadio2
The CCRadio2 has an external antenna terminal for AM. If your recep-
tion is better outside, try this quick and easy antenna: Use 50' of insulat-
ed wire attached to the AM antenna terminal. Also try a ground wire
attached to the ground terminal. Go to ccrane.com/radionoise for more
information about a good grounding method. Run the antenna wire
inside around a window or along a baseboard, or if possible, the wire
should be mounted outside at least three feet away from the face of a
metal building or it may not work. Where an outdoor antenna is not pos-
®
sible, try the Twin Coil Ferrite AM Antenna by C. Crane. The antenna
element can be placed on a window sill or mounted where a better sig-
nal is available. SAFETY DIRECTIONS AND PRECAUTIONS FROM
YOUR ANTENNA SUPPLIER SHOULD BE FOLLOWED TO PRE-
VENT INJURY FROM LIGHTNING OR ANY ACCIDENT with all
antennas.
Left Side Rear View
ƽ
External Antenna
Terminal for AM
Ground Terminal
The CCRadio2 is made for distant or weak AM signal listening. Daytime
reception is limited to about 300 miles maximum because you can only
receive the signal directly from the transmitter site. You may receive AM
stations thousands of miles away at dawn, dusk and at night, depending
on the time of year and atmospheric conditions. The ionosphere is a
layer of ions above the earth. At night it slows and congeals into a giant
mirror and can reflect radio waves back to the earth, allowing you to
receive signals much farther away than during the day.
Distant listening is called DXing. One club that is devoted to DXing is
National Radio Club at: PO Box 164, Mannsville, NY 13661-0164. They
maintain a website at: http://www.nrcdxas.org
Page 26
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
READ BEFORE OPERATING EQUIPMENT
SAVE THESE INSTRUCTIONS
1) Read and understand all safety and operating instructions before the
radio is operated.
2) Retain Instructions: The safety and operating instructions should be
retained for future reference.
3) Heed Warnings: All warnings on the appliance and in the operating
instructions should be followed.
4) Water and Moisture: The appliance should not be used near water. Do
not use near a bathtub, washbowl, laundry tub, kitchen sink, wet
basement, swimming pool, etc.
5) Cleaning: Unplug the receiver from the AC power outlet before clean-
ing. Use only a dry cloth for cleaning the exterior of the receiver.
6) Placement: Do not place the radio on an unstable cart, stand, bracket
or table. The radio may fall, causing serious personal injury and dam-
age to the receiver.
7) Ventilation: This radio should be situated so that its location or posi-
tion do not interfere with its proper ventilation. For example, the
radio should not be used on a bed, sofa, rug or other soft surfaces
that may block the ventilation openings. It should not be placed in a
built-in situation like a cabinet that may reduce air flow through the
ventilation openings.
8) Heat: Never put the radio in direct sunlight in an unventilated area or
behind glass like a carʼs interior. The appliance should be away from
heat sources such as radiators, heat registers, stoves, or other appli-
ances that produce heat.
9) Power Cords: The power cord should be positioned so it is not walked
on, pinched, or have items placed on top of it. Pay particular attention
to cords at plugs, convenience receptacles, and the point where they
exit from the unit. Unplug the power cord by gripping the power plug,
not the cord. Operate the radio using only the correct type of power
source indicated. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
10) Do not overload wall outlets or extension cords. This can result in a
risk of fire or electrical shock. Never insert objects of any kind into the
receiver through openings. The objects may touch dangerous voltage
CCRadio2
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
points or short out parts. This could cause a fire or electrical shock.
11) If the radio is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage caused by
lightning or power line surges.
12) If the radio is left unattended and unused for long periods of time,
remove the batteries. The batteries may leak and damage furniture or
your radio.
13) Do not attempt to service the receiver yourself. Removing the cover
may expose you to dangerous voltage, and will void the warranty.
Refer all servicing to authorized service personnel.
14) The receiver is equipped with a polarized type plug (a plug having
one blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug still fails to
fit, contact an electrician to replace the obsolete outlet. Do not defeat
the safety purpose of this plug.
15) The appliance should be serviced by qualified service personnel
when:
A. The power supply cord or the plug has been damaged, or
B. Objects have fallen or liquid has been spilled into the radio, or
C. The radio has been exposed to rain, or
D. The radio does not appear to operate normally or exhibits a
marked change in performance, or
E. The radio has been dropped or the enclosure damaged.
16) The user should not attempt to service the appliance beyond that
described in the operating instructions. All other servicing
should be referred to qualified service personnel. This
symbol is to alert you to important operation or servicing
Ꮨ
instructions that may appear in the ownerʼs manual.
17) Antenna installations can be dangerous because many times it
involves the use of a ladder and a possible fall. The antenna can be
struck by lightning, which can be fatal. We recommend a licensed
and insured installation by a qualified person.
Page 28
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
P
S
L
ERSONAL TATION OG
Station
Time
City
Frequency
Call Letters
Date
Please feel free to copy this page.
CCRadio2
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
2-METER HAM FREQUENCY L
OG
Time
Frequency
Location/Call Sign
Date
Please feel free to copy this page.
Page 30
CCRadio2
Download from Www.Somanuals.com. All Manuals Search And Download.
About C. Crane Company Inc.
The C. Crane Companyʼs radio division began soon after Bob and Sue
Crane moved from the San Francisco Bay Area to the beautiful and
remote Redwood Country of far Northern California. As they settled into
Fortuna, nestled in the heart of the Redwoods, Bob tried to tune in his
favorite Bay-Area stations, and was shocked. There were only a few
radio stations available until nighttime arrived and thatʼs when the AM
dial came alive. Around that time, Bob spent many hours during the day
at a drafting table and found that he missed listening to KGO, San
Francisco so much while he was working that his drafting and designs
were slowing down.
After about a year of searching, the Cranes found a simple antenna for
AM that gave them fantastic AM reception — even through the trees —
and they knew they had to get the word out. So, they decided to expand
their company to market this wonderful antenna. They advertised the
antenna on the radio, and after a few learning experiences, the
C. Crane radio division was up and running.
That was almost 30 years ago. Bob, Sue and Grandma Faye were the
first phone operators. Their customers quickly taught them what they
wanted in the way of products and services, and with their input, Bob
and Sue grew C. Crane into a family-based business guided by strong
ethics.
Since selling their first AM antenna, C. Crane has become a premier
electronics company. We have developed several radios to serve radio
listeners that prefer information and talk radio. After several near 7.0
earthquakes, in 1992 we added radio and light products that would
become essentials during an emergency event anywhere in the country.
It looks like we will be starting a new light division soon with the release
®
of the new GeoBulb LED light bulb. By focusing on work through divi-
sions of radio and light, we will better serve radio customers and those
interested in energy-saving light bulbs.
Thanks for choosing C. Crane. The items included in the C. Crane
Catalog are always either the best of their class or the best for the
money. All of C. Craneʼs products must pass extensive testing to main-
tain high quality standards.
And as for the mysterious letter “C” in C. Crane, well, Bob and Sueʼs
middle names both begin with the letter “C”, thus the name C. Crane.
Download from Www.Somanuals.com. All Manuals Search And Download.
Model: CCRadio2
FCC ID: BYG 014
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Notice: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
|