Brother Sewing Machine 884 T07 User Manual

Embroidery Machine  
Operation Manual Addendum  
Product Code: 884-T07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cancelling the Thread Color Settings for All Previously  
Stitched Design  
Touch  
.
3
Note  
X Thread colors are assigned by the machine  
again, regardless of the previous spool  
setting.  
The color settings will be completely  
canceled even if the machine is in the  
middle of the embroidery.  
Note  
Touch  
.
This function will not clear anchor settings  
of any of the needles which have been  
assigned a thread color (Refer to “Reserved  
Needle Bar Settings” on page 132 in the  
PR650e Operation Manual).  
1
Touch  
.
2
X The thread color setting is canceled.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Moving Five Hundred Stitches Forward/Back  
and  
have been added to the stitch  
navigation screen. For details on moving forward or  
backward through the stitching, refer to  
“Embroidering From the Beginning or Middle of the  
Pattern” on page 108 of the PR650e Operation  
Manual.  
Each touch of this key moves five hundred  
stitches back through the stitching.  
Each touch of this key moves five hundred  
stitches forward through the stitching.  
Editing Patterns as a Group  
Combined patterns can be grouped and can all be  
edited (rotated, resized, etc.) at the same time.  
Touch  
so that it changes to  
.
1
*
Touch  
to ungroup the patterns. If there are  
multiple grouped patterns, the selected pattern group  
is ungrouped.  
X All patterns displayed in the pattern  
display area are grouped.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
If necessary, touch  
are regrouped.  
so that the patterns  
Sewing the repeated  
pattern without sorting  
colors  
3
With repeated patterns created using the border  
function, pressing  
automatically changes  
the sewing order of the colors so that the same  
color can be continuously sewn. You can edit the  
pattern according to the procedure below to sew  
the repeated pattern without sorting the colors.  
Create the combined border embroidery  
pattern (Refer to “Designing repeated  
1
patterns” on page 172 in the PR650e  
Operation Manual).  
Touch  
so that it changes to  
.
2
X The border function is canceled.  
X All patterns displayed in the pattern  
display area are grouped.  
If necessary touch  
to sew the thread  
.
4
mark, and then touch  
(Refer to page 175 in the PR650e Operation  
Manual)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Touch  
, then  
.
5
Sending Embroidery Patterns From a Computer to the  
Machine (Link Function)  
Check the sewing status of the embroidery  
machine (this model) from the computer  
(Example of multiple machines connected)  
Operations available with  
the Link function  
Send multiple embroidery patterns to  
connected embroidery machines  
As many as 100 embroidery patterns can be  
transferred to an embroidery machine, and the  
embroidering status of the patterns being  
transferred can be viewed from the computer  
monitor.  
Use the included USB cable to connect the  
embroidery machine to a computer.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
Touch  
to enable the Link function.  
2
When connecting multiple embroidery  
machines to the computer, use a  
commercially available USB hub.  
Please note that we recommend using a  
self-powered USB hub. Do not use USB  
extension cables or repeater cables. For  
details on using the USB hub, refer to its  
operating instructions.  
X When the following message appears,  
touch  
.
Embroidering using  
the Link function  
First, use the embroidery editing software to create  
the embroidery pattern to be sent to the embroidery  
machine.  
Note  
Turn off the machine.  
Only embroidery data in the PES format  
(.pes) can be embroidered using the Link  
function.  
3
You cannot select .dst data to send from a  
computer using the Link function.  
The Link function cannot be used with  
large-size (split) embroidery patterns.  
Attach to the embroidery machine the  
embroidery frame for the size of the  
pattern to be sent.  
Use the included USB cable to connect the  
embroidery machine to the computer.  
Touch  
to display page 5 of the machine settings  
screen.  
, and then touch  
and  
4
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn on the machine.  
5
Note  
For details on using the embroidery editing  
software, refer to the Instruction Manual  
included with the software.  
*
This Link dialog box is found in PE-DESIGN  
NEXT software.  
Using embroidery editing software provided  
with the Link function, such as PE-DESIGN  
NEXT, or later, will allow you to send the  
embroidery pattern(s) to the machine in the  
Link mode from your computer.  
6
7
If the following error message appears, the  
type of embroidery frame installed on the  
machine is not compatible with the size of  
the pattern. Replace the embroidery frame  
with one compatible with the size of the  
pattern.  
When the following message appears, touch  
.
X A message appears in the machine’s LCD  
while the machine is connecting to PC.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
After the embroidery pattern has been  
opened by the machine, the embroidering  
screen appears.  
To change the embroidery settings for the  
opened embroidery pattern, touch  
8
9
.
• Touch  
appears. Touch  
embroidering screen.  
when the following message  
X The opened embroidery pattern appears in  
the pattern display area with the icon for  
the Link function.  
to return to the  
1
2
3
X The embroidery settings screen appears.  
After the desired settings have been  
0
specified, touch  
to return to the  
embroidering screen.  
1 Icon for Link function  
2 10-digit machine ID  
3 Number of the pattern in the queue  
• Touch  
to delete the pattern.  
Memo  
While the embroidery machine is  
connected to the computer, the machine’s  
status can be displayed by using a function  
of the embroidery editing software. If  
multiple embroidery machines are  
connected at the same time, check the  
status of the machines using the 10-digit  
machine ID that appears in the machine’s  
screen. The following information can be  
viewed from the computer.  
• Number of the stitch being sewn and  
total number of stitches in the pattern  
• Information about sewing errors  
Touch  
, and then press the start/  
a
stop button to start embroidering.  
X When embroidering is finished, the  
following message appears.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
To open another pattern sent from the  
b
Disabling the Link function  
computer, touch  
, and then repeat the  
procedure starting from step  
embroidering.  
8
to continue  
Touch  
to display page 5 of the machine settings  
screen.  
, and then touch  
and  
1
• To stop embroidering or to embroider the  
same pattern again, touch  
.
Touch  
to disable the Link function.  
2
Note  
The embroidering screen settings specified  
in step  
0
are saved even if  
was  
touched to continue sewing after  
embroidering is finished.  
X When the following message appears,  
touch  
.
Memo  
If the embroidery machine is turned off  
while it is embroidering, the resume  
operation can be used the next time it is  
turned on.  
Turn off the machine.  
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
.
Error messages in the  
Link function  
Machine failed to communicate  
with the PC in the Link mode.  
Turn the machine off, and then turn  
the machine on again.  
Machine cannot receive any data  
from the PC in the Link mode.  
Turn off the machine, and check  
the USB connection. After  
connecting the USB cord securely,  
turn on the machine again.  
Selecting the Thread Color Information for “PES”  
Format Data  
Refer to page 194 in the PR650e Operation Manual  
for the details of understanding the machine's  
settings screen.  
You can display the thread color for “PES” format  
data according to the machine setting, or setting  
from the PE-DESIGN, PE-DESIGN Lite or PED-Basic  
(embroidery editing software).  
(Refer to “Changing the thread color information”  
on page 197 in the PR650e Operation Manual for  
the machine setting of thread color.)  
The “PES” Thread Code can be selected from page  
1/6 of the settings screen.  
ON: The thread color information will be displayed  
according to the PE-DESIGN, PE-DESIGN Lite or  
PED-Basic (embroidery editing software) settings.  
OFF: The thread color information displayed will  
be according to the machine setting.  
When the machine is purchased, “ON” is selected.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the Length of Time until the Machine’s Next  
Stop  
The length of time until the embroidery machine's  
next stop can be viewed in the embroidering  
screen.  
The machine stops when a spool change is  
11  

Beyerdynamic Headphones Revoluto Microphone User Manual
Black Decker Vacuum Cleaner BDH2000SDL User Manual
Bosch Appliances Dishwasher SHE46C06UC User Manual
Bravetti Coffeemaker CM80H User Manual
Breadman Kitchen Grill TR456 User Manual
Breville Juicer JE95XL User Manual
Cannon Oven C60GCIS User Manual
Canon Camera Lens 200mm F 28L II User Manual
Casio Printer IT 3000 User Manual
Cisco Systems IP Phone OL 23091 01 User Manual