Basic User's Guide
DCP-L2520DW
DCP-L2540DW
MFC-L2680W
MFC-L2700DW
MFC-L2705DW
Online User's Guide
This Basic User's Guide contains basic
instructions and information for your Brother
machine.
For more advanced instructions and information,
see the Online User's Guide at
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother Numbers
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be made
from within that country.
Register Your Product
By registering your product with Brother International Corporation, you will be recorded as the
original owner of the product. Your registration with Brother:
• may serve as confirmation of the purchase date of your product if you lose your receipt;
• may support an insurance claim by you in the event of product loss covered by insurance;
and,
• will help us notify you of enhancements to your product and special offers.
Complete and fax the Brother Warranty Registration and Test Sheet, or register on-line at
FAQs (Frequently Asked Questions)
The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function
Center needs. Download the latest software and utilities and read FAQs and troubleshooting tips
to learn how to get the most from your Brother product.
• Check here for Brother driver updates.
• To keep your machine’s performance up to date, check here for the latest firmware
upgrade.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
For Customer Service
In USA:
1-877-BROTHER (1-877-276-8437)
1-901-379-1215 (assistance via fax)
1-877-268-9575 (test your fax sending and fax receiving operations)
In Canada:
www.brother.ca/support (Self-Service Videos, Email, Chat, Facebook and Twitter Help)
Service Center Locator (USA only)
For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437)
Service Center Locations (Canada only)
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Accessories and Supplies
For best quality results use only genuine Brother supplies, which are available at most Brother
retailers. If you cannot find the supplies you need and have a Visa, MasterCard, Discover,
American Express credit card, or PayPal account, you can order directly from Brother. Visit us
online for a complete selection of the Brother accessories and supplies that are available for
purchase.
NOTE
In Canada, only Visa and MasterCard are accepted.
In USA:
1-877-552-MALL (1-877-552-6255)
1-800-947-1445 (assistance via fax)
In Canada:
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Order Information
Description
Item
Toner cartridge
TN-630 (Approximately 1,200 pages, Letter or A4 size single-
sided pages)
TN-660 (Approximately 2,600 pages, Letter or A4 size single-
sided pages)
Drum Unit
DR-630 (Approximately 12,000 pages, 1 page per job)
Telephone Line Cord
Basic User's Guide
LG3077001
LEV446001 (English for USA and Canada)
LEM597002 (French for Canada)
LEV445001 (English for USA and Canada)
LEM587002 (French for Canada)
Quick Setup Guide
1
Approximate cartridge yield is declared in accordance with ISO/IEC 19752.
Standard toner cartridge
2
3
4
High yield toner cartridge
Drum life is approximate and may vary by type of use.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice - Disclaimer of Warranties (USA and
Canada)
BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR
AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE
SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE
ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE
SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS
OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE
SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT
PERMITTED BY SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE
ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU FOR ANY
CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN
CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU. IN ANY EVENT BROTHER’S LICENSOR’S LIABILITY TO YOU FOR ACTUAL
DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE
ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
For the Latest Driver Updates
Go to your model's Downloads page on the Brother Solutions Center at
To keep your machine’s performance up-to-date, check there for the latest firmware upgrades.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
The Online User's Guide Helps You Get the Most
Out of Your Machine
Quicker navigation!
Search box
Navigation index in a separate panel
Comprehensive!
Every topic in one guide
Simplified Layout!
Provides step-by-step instructions
Feature summary at the top of the page
1
2
3
4
1. Search Box
2. Navigation
3. Summary
4. Step-by-Step
Where can I find this manual?
®
(Windows )
Click
(Start) > All Programs > Brother > Brother Utilities > Brother MFC-XXXX series >
Support > User’s Guides.
®
(Windows 8)
Tap or click
(Brother Utilities) > Brother MFC-XXXX series > Support > User’s Guides.
(Select your model from the drop-down list if not already selected.)
(Macintosh or other options)
to download manuals.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
If you have questions or problems, please take a
look at our FAQs.
Provides several ways to search!
Displays related questions for more information
Receives regular updates based on customer feedback
Since the Brother Solutions Center is updated regularly, this screen shot is subject to change
without notice.
Where can I find these FAQs?
Brother Solutions Center
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Definitions of Notes
We use the following symbols and conventions throughout this User's Guide:
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
IMPORTANT
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
NOTE
NOTE specifies the operating environment, conditions for installation, or special conditions of
use.
Tips icons provide helpful hints and supplementary information.
Electrical Hazard icons alert you to possible electrical shock.
Fire Hazard icons alert you to the possibility of a fire.
Hot Surface icons warn you not to touch hot machine parts.
Prohibition icons indicate actions you must not perform.
Bold
Bold style identifies buttons on the machine's control panel or computer screen.
Italics
Italicized style emphasizes an important point or refers you to a related topic.
Courier New
Courier New font identifies messages shown on the machine's LCD.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Compilation and Publication Notice
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,
covering the latest product's descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Basic User's Guide
1
Set the Date and Time.....................................................................................9
Paper Handling...................................................................................................11
2
Load Paper..............................................................................................................11
Using Special Paper................................................................................................14
3
Print from Your Computer (Windows )....................................................................15
Print a Document (Windows ).......................................................................15
using the Manual Feed Slot...........................................................................19
4
5
Scan from Your Computer (Windows )...................................................................28
x
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Set Your Station ID ........................................................................................31
Receive Modes..............................................................................................32
Store Speed Dial Numbers............................................................................37
Telephone Services and External Devices ..............................................................39
Distinctive Ring..............................................................................................39
Voice Over Internet Protocol (VoIP)...............................................................39
Fax Using Your Computer (PC-FAX).......................................................................43
A
B
Fax and Telephone Problems..................................................................................51
Document and Paper Jams.....................................................................................56
Clear the Document Jam...............................................................................56
Appendix............................................................................................................ 64
How to Enter Text on Your Brother Machine ...........................................................64
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Index................................................................................................................... 67
C
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
1
Control Panel Overview
The control panel will vary depending on your model.
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
1
2
3
4
6
5
1. One Touch buttons
Store and recall up to eight fax and telephone numbers.
To access stored One Touch fax and telephone numbers 1-4, press the One Touch button
assigned to that number. To access stored One Touch fax and telephone numbers 5-8, hold
down (Shift) as you press the number.
2. Fax buttons
Redial/Pause
Press to dial the last numbers you called. This button also inserts a pause when
programming quick dial numbers or when dialing a number manually.
Hook
Press Hook before dialing to ensure a fax machine answers, and then press Start.
If the machine is in Fax/Tel (F/T) Mode and you pick up the handset of an external
telephone during the F/T ring (pseudo double-rings), press Hook to talk.
3. WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-
screen instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point.
When the WiFi light blinks, the wireless connection is down, or your machine is in the process
of connecting to a wireless access point.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Liquid Crystal Display (LCD)
Displays messages to help you set up and use the machine.
If the machine is in Fax Mode, the LCD displays:
a
01/01 12:00AM
Fax Only
a. Date & Time
b. Receive Mode
When you press COPY, the LCD displays:
c
d
Stack Copies:01
100%□□■□□
Auto
g
e
c. Type of copy
d. Number of copies
e. Quality
f. Contrast
g. Copy ratio
5. Mode buttons
FAX
Press to switch the machine to FAX Mode.
SCAN
Press to switch the machine to SCAN Mode.
COPY
Press to switch the machine to COPY Mode.
6. Copy buttons
Options
Press to access temporary settings for copying.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
2-sided (for automatic 2-sided printing models)
Press to copy on both sides of a sheet of paper.
Enlarge/Reduce (for certain models only)
Press to reduce or enlarge copies.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
10
11
7. Menu buttons
Clear
Press to delete entered data or cancel the current setting.
Menu
Press to access the Menu for programming your machine settings.
OK
Press to store your machine settings.
d or c
Press to scroll back or forward through menu selections.
a or b
• Press to scroll up or down through menus and options.
• Press to change the resolution in Fax Mode.
Press
to access speed dial numbers.
8. Dial Pad
• Use to dial fax and telephone numbers.
• Use as a keyboard to enter text or characters.
9.
Power On/Off
• Turn on the machine by pressing
.
• Turn off the machine by pressing and holding
. The LCD displays Shutting Down
and stays on for a few seconds before turning off. If you have an external telephone or
TAD connected, it is always available.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Stop/Exit
• Press to stop an operation.
• Press to exit from a menu.
11. Start
• Press to start sending faxes.
• Press to start copying.
• Press to start scanning documents.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DCP-L2520DW/DCP-L2540DW
This illustration is based on DCP-L2540DW.
1
2
3
4
5
1.
Power On/Off
• Turn on the machine by pressing
.
• Turn off the machine by pressing and holding
and stays on for a few seconds before turning off.
. The LCD displays Shutting Down
2. Copy buttons
Options
Press to access temporary settings for copying.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
3. Scan
Press to switch the machine to Scan Mode.
4. WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-
screen instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point.
When the WiFi light blinks, the wireless connection is down, or your machine is in the process
of connecting to a wireless access point.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Liquid Crystal Display (LCD)
Displays messages to help you set up and use the machine.
If the machine is in Ready Mode or COPY Mode, the LCD displays:
a
b
Stack Copies:01
100%□□■□□
Auto
e
c
a. Type of copy
b. Number of copies
c. Quality
d. Contrast
e. Copy ratio
6
7
8
6. Menu buttons
Menu
Press to access the Menu for programming your machine settings.
Clear
• Press to delete entered data.
• Press to cancel the current setting.
OK
Press to store your machine setting.
a or b
Press to scroll up or down through menus and options.
7. Stop/Exit
• Press to stop an operation.
• Press to exit from a menu.
8. Start
• Press to start copying.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press to start scanning documents.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the operation you want to use.
Access Brother Utilities
3
Brother Utilities is an application launcher
that offers convenient access to all Brother
applications installed on your device.
Do one of the following:
1
®
®
• (Windows XP, Windows Vista ,
®
®
Windows 7, Windows Server 2003,
®
Windows Server 2008 and Windows
®
Server 2008 R2)
Click
Start > All Programs >
Brother > Brother Utilities.
®
®
• (Windows 8 and Windows Server
2012)
Tap or Click
(Brother Utilities)
either on the Start screen or the
desktop.
®
• (Windows 8.1 and Windows
®
Server 2012 R2)
Move your mouse to the lower left
corner of the Start screen and click
(if you are using a touch-based
device, swipe up from the bottom of
the Start screen to bring up the Apps
screen). When the Apps screen
appears, tap or click
(Brother
Utilities).
Select Brother MFC-XXXX series
(where XXXX is the name of your
model).
2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Do one of the following:
Initial Setup
9
• If you selected 12h Clockas the
format in the Date&Timesetting,
enter the time (in 12-hour format)
using the dial pad.
Set the Date and Time
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Press OK.
Press a or b to display the AMor PM
option, and then press OK.
Press Menu.
1
• If you selected 24h Clockas the
format in the Date&Timesetting,
enter the time (in 24-hour format)
using the dial pad.
Press a or b to display the Initial
2
Setupoption, and then press OK.
Press OK.
Press a or b to display the Date&Time
option, and then press OK.
3
(For example: enter 19:45 for
7:45 PM.)
Press a or b to display the Date&Time
option, and then press OK.
10Press Stop/Exit.
4
Enter the last two digits of the year
5
Adjust the Ring Volume
using the dial pad, and then press OK.
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Enter the two digits for the month using
6
the dial pad, and then press OK.
Press Menu.
1
Enter the two digits for the day using the
dial pad, and then press OK.
7
Press a or b to display the General
2
Setupoption, and then press OK.
Press a or b to display the 12h Clock
8
or 24h Clockoption, and then press
OK.
Press a or b to display the Volume
option, and then press OK.
3
Press a or b to display the Ringoption,
and then press OK.
4
Press a or b to display the High, Med,
5
Low, or Offoption, and then press OK.
Press Stop/Exit.
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Stop/Exit.
Adjust the Beeper Volume
6
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
When the beeper is on, the machine will beep
when you press a button, make a mistake, or
after you send or receive a fax. You can
choose from a range of volume levels.
Press Menu.
1
Press a or b to display the General
2
Setupoption, and then press OK.
Press a or b to display the Volume
option, and then press OK.
3
Press a or b to display the Beeper
option, and then press OK.
4
Press a or b to display the High, Med,
5
Low, or Offoption, and then press OK.
Press Stop/Exit.
6
Adjust the Speaker Volume
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Press Menu.
1
Press a or b to display the General
2
Setupoption, and then press OK.
Press a or b to display the Volume
option, and then press OK.
3
Press a or b to display the Speaker
option, and then press OK.
4
Press a or b to display the High, Med,
5
Low, or Offoption, and then press OK.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Handling
2
Load Paper
Load and Print using the
Paper Tray
• If the Check Size setting is set to On and
you pull the paper tray out of the
machine, a message appears on the
LCD asking if you want to change the
paper size. Change the paper size and
paper type settings if needed, following
the on-screen instructions.
• When you load a different paper size in
the tray, you must change the paper size
setting in the machine or on your
computer at the same time.
For Legal or Folio size paper, press the
release button (1) in the bottom of the
paper tray and then pull out the back of
the paper tray. (Legal and Folio size
paper are not available in some regions.)
Pull the paper tray completely out of the
machine.
1
Press and slide the paper guides to fit
the paper.
2
1
Press the green release levers to slide
the paper guides.
Fan the stack of paper well.
3
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Load paper with the printing surface
face down in the paper tray.
Send your print job to the machine.
4
5
8
Change your print preferences in the Print
dialog box before sending the print job
from your computer.
DO NOT load different types of paper in
the paper tray at the same time. Doing
this may cause the paper to jam or
misfeed.
Set the Check Size
Make sure the paper is below the
maximum paper mark (b b b).
Your Brother machine's Check Size setting
causes the machine to display a message
when you remove the paper tray from the
machine, asking if you changed the paper
size.
Overfilling the paper tray will cause
paper jams.
The default setting is On.
Press Menu.
1
Press a or b to display the General
2
Setupoption, and then press OK.
Press a or b to display the Paper
option, and then press OK.
3
Press a or b to display the Check Size
option, and then press OK.
4
Slowly push the paper tray completely
into the machine.
6
7
Press a or b to select the Onor Off
option, and then press OK.
5
Lift the support flap to prevent paper
from sliding off the output tray.
Press Stop/Exit.
6
Change the Paper Size
When you change the size of the paper you
load in the tray, you must change the paper
size setting on the LCD at the same time.
Press Menu.
1
Press a or b to display the General
2
Setupoption, and then press OK.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Press a or b to display the Paper
option, and then press OK.
Recommended Print
Media
3
4
5
Press a or b to display the Paper Size
option, and then press OK.
To get the best print quality, we recommend
using the paper in the table.
Press a or b to display the Letter,
Legal, Executive, A5, A5 L, A6,
Folio, or A4option, and then press
OK.
Paper Type
Item
Plain Paper
Xerox 4200DP 20 lb
Hammermill Laser Print
2
(24 lb = 90 g/m )
Press Stop/Exit.
6
Recycled
Paper
No specific brand
recommended
Labels
Avery laser labels white
#5160
Change the Paper Type
Envelopes
No specific brand
recommended
To get the best print quality, set the machine
for the type of paper you are using.
Press Menu.
1
Press a or b to display the General
2
Setupoption, and then press OK.
Press a or b to display the Paper
option, and then press OK.
3
Press a or b to display the Paper Type
option, and then press OK.
4
Press a or b to display the Thin,
5
Plain, Thick, Thicker, or Recycled
Paperoption, and then press OK.
Press Stop/Exit.
6
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Special Paper
Always test paper samples before purchasing
them to ensure desirable performance.
• DO NOT use inkjet paper; it may cause a
paper jam or damage your machine.
• If you use bond paper, paper with a rough
surface, or paper that is wrinkled or
creased, the paper may exhibit degraded
performance.
IMPORTANT
Some types of paper may not perform well or
may cause damage to your machine.
DO NOT use paper:
• that is highly textured
• that is extremely smooth or shiny
• that is curled or warped
• that is coated or has a chemical finish
• that is damaged, creased or folded
• that exceeds the recommended weight
specification in this guide
• with tabs and staples
• with letterheads using low temperature
dyes or thermography
• that is multipart or carbonless
• that is designed for inkjet printing
If you use any of the types of paper listed
above, they may damage your machine. This
damage is not covered under any Brother
warranty or service agreement.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Print
3
®
Print from Your Computer (Windows )
Print a Document
(Windows )
Print on Both Sides of the
Paper (Windows )
®
®
Related Models:
DCP-L2520DW/DCP-L2540DW/MFC-L2700DW/
MFC-L2705DW
Select the print command in your
application.
1
Select Brother MFC-XXXX series
(where XXXX is the name of your
model).
2
Click OK.
3
4
Complete your print operation.
For more information, see the Online
User's Guide: Print a Document
• Select Letter, Legal, or Folio size paper
when using the automatic 2‑sided
printing option.
Select the print command in your
application.
1
Select Brother MFC-XXXX series
2
(where XXXX is the name of your
model), and then click the printing
properties or preferences button.
The printer driver window appears.
Click the 2-sided / Booklet drop-down
list and select the 2-sided option.
3
Click the 2-sided Settings button.
4
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Select an option from the 2-sided Type
menu.
Print More Than One Page
on a Single Sheet of Paper
(N in 1) (Windows )
5
®
Click OK.
6
7
Click OK again, and then complete your
print operation.
Select the print command in your
application.
1
Select Brother MFC-XXXX series
(where XXXX is the name of your
model), and then click the printing
properties or preferences button.
2
The printer driver window appears.
Click the Multiple Page drop-down list
and select the 2 in 1, 4 in 1, 9 in 1, 16
in 1, or 25 in 1 option.
3
Click OK.
4
5
Complete your print operation.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
(For printing envelopes) Pull down the
two green levers, one on the left side
and one on the right side, to the
envelope position as shown in the
illustration.
Printing on Envelopes,
Thick Paper, or Labels
2
When the back cover (face-up output tray) is
pulled down, the machine has a straight paper
path from the manual feed slot on the front of
the machine through the back of the machine
and onto the face-up output tray. Use this
manual feed and output method for printing on
thick paper or envelopes.
• Load the paper or envelope into the
manual feed slot with the printing surface
face up.
• DO NOT load more than one sheet of
paper or one envelope in the manual
feed slot at any one time. Doing this may
cause a jam.
On the front of the machine, open the
manual feed slot cover.
3
4
Open the back cover (face-up output
tray).
1
Slide the manual feed slot paper guides
to the width of the paper.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Push one sheet of paper or one
envelope firmly into the manual feed
slot.
Click the Portrait or Landscape option
to set the orientation of your printout.
5
11
12Change other printer settings if needed.
13Click OK.
Continue pushing the paper until the top
edge of the paper presses against the
rollers for about two seconds, or until
the machine grabs the paper and pulls it
in further.
14Click Print.
(For printing envelopes) When you have
15
finished printing, return the two green
levers back to their original positions.
Select the print command in your
application.
6
7
Select Brother MFC-XXXX series
(where XXXX is the name of your
model), and then click the printing
properties or preferences button.
The printer driver window appears.
Click the Paper Size drop-down list and
select your paper size.
8
9
Click the Media Type drop-down list and
select the type of paper you are using.
Click the First Page and Other Pages
drop-down lists and select Manual.
10
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide the manual feed slot paper guides
to the width of the paper.
Printing on Plain Paper, Thin
Paper, Recycled Paper, or
Bond Paper using the
Manual Feed Slot
3
4
• Load the paper into the manual feed slot
with the printing surface face up.
• DO NOT load more than one sheet of
paper in the manual feed slot at any one
time. Doing this may cause a jam.
Push one sheet of paper firmly into the
manual feed slot.
Lift up the support flap to prevent paper
1
from sliding off the face-down output
tray, or remove each page as soon as it
comes out of the machine.
Continue pushing the paper until the top
edge of the paper presses against the
rollers for about two seconds, or until
the machine grabs the paper and pulls it
in further.
Select the print command in your
application.
5
Open the manual feed slot cover.
2
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Brother MFC-XXXX series
(where XXXX is the name of your
model), and then click the printing
properties or preferences button.
6
The printer driver window appears.
Click the Paper Size drop-down list and
select your paper size.
7
8
Click the Media Type drop-down list and
select the type of paper you are using.
Click the First Page and Other Pages
drop-down list and select Manual.
9
Click the Portrait or Landscape option
to set the orientation of your printout.
10
11 Change other printer settings if needed.
12Click OK.
13Click Print.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy
4
Do one of the following:
• For MFC models
Copy a Document
3
Press
(COPY).
Make sure you have loaded the correct
1
size paper in the paper tray.
Use the dial pad to enter the number
of copies you want.
Do one of the following:
• For DCP models
2
• Place the document face up in the
ADF.
Press a or b to enter the number of
copies you want.
(If you are copying multiple pages,
we recommend using the ADF.)
The LCD displays:
Stack Copies:01
100%
Auto
Press Start.
4
• Place the document face down on
the scanner glass.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy Settings
Copy Option
To change Copy settings, press the Options button.
Menu selections
Options
Auto
Quality
Text
Photo
Receipt
Stack
Stack/Sort
Sort
A
B
B
A
B
A
B
B
A
A
B
A
Brightness
Contrast
Increase the brightness to make the text lighter.
Decrease the brightness to make the text darker.
Increase the contrast to make an image clearer.
Decrease the contrast to make an image more subdued.
Enlarge/Reduce
100%
97% LTR→A4
94% A4→LTR
91% Full Page
85% LTR→EXE
83% LGL→A4(for models with ADF)
78% LGL→LTR(for models with ADF)
70% A4→A5
50%
Custom(25-400%)
Auto(for models with ADF)
200%
141% A5→A4
104% EXE→LTR
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu selections
Options
Page Layout
Off(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Off
2-sided
1sided→2sided L
1sided→2sided S
(available only for certain
models)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Do one of the following:
Copy Multiple Pages on
Both Sides of the Paper
2
• Place the document face up in the
ADF.
Related Models:
DCP-L2520DW/DCP-L2540DW/MFC-L2700DW/
MFC-L2705DW
(If you are copying multiple pages,
we recommend using the ADF.)
You must choose a 2-sided copy layout
from the following options before you can
start 2-sided copying:
Portrait
1–sided > 2–sided Long Edge Flip
1
1
2
2
1–sided > 2–sided Short Edge Flip
• Place the document face down on
the scanner glass.
1
1
2
2
Landscape
1–sided > 2–sided Long Edge Flip
1
1
2
2
1–sided > 2–sided Short Edge Flip
1
(For MFC models)
3
4
1
Press
(COPY).
2
2
Do one of the following:
Make sure you have loaded the correct
size paper in the paper tray.
• Press 2-sided.
1
• Press Options. Press a or b to
display the 2-sidedoption, and
then press OK.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Press a or b to select one the following
layout options, and then press OK.
Copy a 2-sided Document
Using the Scanner Glass
5
• 1sided→2sided L
• 1sided→2sided S
Related Models:
DCP-L2520DW/DCP-L2540DW/MFC-L2700DW/
MFC-L2705DW
Enter the number of copies.
6
7
You must choose a 2-sided copy layout
from the following options before you can
start 2-sided copying.
Press Start to scan the page.
If you are copying using the ADF, the
machine feeds and scans the pages and
starts printing.
Portrait
2–sided > 2–sided
1
1
If you are copying using the scanner glass,
go to the next step.
After the machine scans the page,
select the Yesor Nooption.
2
2
8
Landscape
2–sided > 2–sided
Option Description
Yes
No
Press 1 or a to scan the next
page.
1
1
Place the next page on the
scanner glass, and then
press OK.
2
2
Make sure you have loaded the correct
size paper in the paper tray.
Press 2 or b when you have
scanned all the pages.
1
2
3
Place your document face down on the
scanner glass.
(For MFC models)
Press
(COPY).
Do one of the following:
4
• Press 2-sided.
• Press Options. Press a or b to
display the 2-sidedoption, and
then press OK.
Press a or b to select one the following
layout options, and then press OK.
5
• 1-sided -> 2-sided(L)
• 1-sided -> 2-sided(S)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter the number of copies.
Copy Both Sides of an ID
Card onto One Page
Use the 2in1 (ID) Copy feature to copy both
sides of an identification card onto one page,
keeping the original card size.
6
7
8
Press Start to scan the page.
After the machine scans the page,
select the Yesor Nooption.
Option Description
Yes
No
Press 1 or a to scan the next
page.
Place the next page on the
scanner glass, and then
press OK.
Press 2 or b when you have
scanned all the pages.
• Copy an identification card only to the
extent permitted under applicable laws.
For more information, see the Product
Safety Guide.
(For MFC models)
1
Press
(COPY).
Place an identification card face down
near the upper left corner of the scanner
glass.
2
1
1
0.16 in. (4.0 mm) or greater (top,
left)
Press 2 in 1 (ID) Copy.
3
4
Do one of the following:
26
Download from Www.Somanuals.com. All Manuals Search And Download.
• For MFC models
Use the dial pad to enter the number
of copies you want.
• For DCP models
Press a or b to enter the number of
copies you want.
Press Start.
5
6
The machine scans one side of the
identification card.
After the machine has scanned the first
side, turn over the identification card.
Press Start to scan the other side.
7
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan
5
Click
Start > All Programs >
Scan from Your
2
Brother > Brother Utilities, and then
click the drop-down list and select your
model name (if not already selected).
Click SCAN in the left navigation bar,
and then click ControlCenter4. The
ControlCenter4 application opens.
®
Computer (Windows )
There are several ways you can use your
computer to scan photos and documents on
your Brother machine. Use the software
applications provided by Brother, or use your
favorite scanning application.
Save Scanned Documents
and Photos to a Folder as a
PDF File Using
ControlCenter4 Advanced
®
Mode (Windows )
Scan documents and save them to a folder on
your computer as PDF files.
When you open the ControlCenter4
application at the first time, select the
display mode.
3
4
Click the Scan tab.
Load your document.
1
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Click the File button.
Scan Using the Scan
Button on Your Brother
Machine
5
The scan settings dialog box appears.
Scan Using the Scan Button
on the Machine
Do one of the following:
1
• Place the document face up in the
ADF.
(If you are scanning multiple pages,
we recommend using the ADF.)
Change the scan settings if needed, and
then click Scan.
6
The machine scans the document and
saves the file in the folder you have
selected. The folder opens
automatically.
For more information, see the Online
User's Guide: Scan from Your Computer
• Place the document face down on
the scanner glass.
Press
(SCAN).
2
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Press a or b to display the Scan to PC
option, and then press OK.
3
4
5
Press a or b to display the Fileoption,
and then press OK.
If the machine is connected to a
network, press a or b to display the
computer where you want to send the
document, and then press OK.
Do one of the following:
6
• To change the scan settings for this
document, press a or b to select Yes,
and then press OK. Go to the next
step.
• To use the default scan settings,
press a or b to select No, and then
press OK. Press Start.
The machine starts scanning. If you
are using the machine's scanner
glass, follow the LCD instructions to
complete the scanning job.
• In order to change scan settings,
Brother's Control Center software must
be installed on a computer connected
to the machine.
Select the scan settings you want to
change:
7
8
• Scan Type
• Resolution
• File Type
• Scan Size
• Remove Bkg. Clr
(available only for the Colorand
Grayoptions.)
Press Start.
The machine scans the document.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax
6
Before Faxing
Press Stop/Exit.
Set Your Station ID
8
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
NOTE
(USA only) The Telephone Consumer
Protection Act of 1991 makes it unlawful for
any person to use a computer or electronic
device to send any message via a telephone
fax machine unless such messages clearly
contain, in a margin at the top or bottom of
each transmitted page, or on the first page of
the transmission, the date and time it is sent
and an identification of the business or other
entity or other individual sending the message
and the telephone number of the sending
machine or such business, other entity or
individual. To program this information into
your machine, see Set the date and time and
Set your Station ID.
Set the machine to print your Station ID and
the fax's date and time at the top of each fax
you send.
Press
(FAX).
1
2
3
Press Menu.
Press a or b to display the Initial
Setupoption, and then press OK.
Press a or b to display the Station ID
option, and then press OK.
4
5
6
Related Information
Enter your fax number (up to 20 digits)
using the dial pad, and then press OK.
Enter your telephone number (up to 20
digits) using the dial pad, and then press
OK.
If your telephone number and fax
number are the same, enter the same
number again.
Use the dial pad to enter your name (up
to 20 characters), and then press OK.
7
• To enter text on your machine, see
Related Information: How to Enter Text
on Your Brother Machine
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Telephone Line
Compatibility for
Interference and VoIP
Systems
Option
Description
Basic
(for
VoIP)
Select Basic (for
VoIP)to reduce the
modem speed to 9600 bps
and turn off Error
Correction Mode (ECM).
Unless interference is a
recurring problem on your
telephone line, you may
prefer to use it only when
needed.
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Problems sending and receiving faxes due to
possible interference on the telephone line
may be solved by lowering the modem speed
to minimize errors in fax transmission. If you
are using a Voice over IP (VoIP) service,
Brother recommends changing the
To improve compatibility
with most VoIP services,
Brother recommends
changing the compatibility
setting to Basic (for
VoIP).
compatibility to Basic (for VoIP).
• VoIP is a type of phone system that
uses an Internet connection, rather
than a traditional phone line.
Press Stop/Exit.
6
Press Menu.
1
Related Information
Press a or b to display the Faxoption,
2
and then press OK.
Receive Modes
Press a or b to display the
Miscellaneousoption, and then press
OK.
3
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Some receive modes answer automatically
(Fax Only Mode and Fax/Tel Mode). You may
want to change the Ring Delay before using
these modes.
Press a or b to display the
Compatibilityoption, and then press
OK.
4
Fax Only Mode
Press a or b to display the High,
5
(Faxor Fax onlyin the Machine's Menu)
Normal, or Basic (for VoIP)
option, and then press OK.
Fax Only Mode automatically answers
every call as a fax.
Option
Description
Fax/Tel Mode
High
(Fax/Telin the Machine's Menu)
Select Highto set the
modem speed at 33600
bps.
Fax/Tel Mode helps you manage incoming
calls, by recognizing whether they are fax
or voice calls and handling them in one of
the following ways:
Normal
Select Normalto set the
modem speed at 14400
bps.
• Faxes will be received automatically.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
• Voice calls will start the F/T ring to tell
you to pick up the call. The F/T ring is a
fast pseudo/double-ring made by your
machine.
Manual Mode
(Manualin the Machine's Menu)
Manual Mode turns off all automatic
answering operations unless you are using
the Distinctive Ring Receive feature.
To receive a fax in Manual Mode lift the
handset of the external telephone or press
Hook.
When you hear fax tones (short repeating
beeps), press Start and then 2 to receive a
fax. Use the Easy Receive feature to
receive faxes when you have lifted a
handset on the same line as the machine.
External TAD Mode
(External TADin the Machine's Menu)
External TAD Mode lets an external
answering device manage your incoming
calls.
Incoming calls will be handled in the
following ways:
• Faxes will be received automatically.
• Voice callers can record a message on
the external TAD.
Related Information
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the Correct Receive Mode
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
The correct Receive Mode for you is determined by the external devices and telephone
subscriber services (Voice Mail, Distinctive Ring and so on) you will be using on the same line as
the Brother machine.
Will you be using a Distinctive Ring number for receiving faxes?
Brother uses the term "Distinctive Ring" but different telephone companies may have other
names for this service such as Custom Ringing, RingMaster, Personalized Ring, Teen Ring,
Ident-A-Ring, Ident-A-Call, Data Ident-A-Call, Smart Ring and SimpleBiz Fax & Alternate
Number Ringing. See Related Information: Distinctive Ring
Will you be using Voice Mail on the same telephone line as your Brother machine?
If you have Voice Mail on the same telephone line as your Brother machine, there is a strong
possibility that Voice Mail and the Brother machine will conflict with each other when receiving
incoming calls. See Related Information: Voice Mail
Will you be using a Telephone Answering Device on the same telephone line as your
Brother machine?
Your external telephone answering device (TAD) will answer every call automatically. Voice
messages are stored on the external TAD and fax messages are printed. Select External TAD
Mode as your receive mode. See Related Information: Connection of an External Telephone
Answering Device (TAD)
Will you be using your Brother machine on a dedicated fax line?
Your machine automatically answers every call as a fax. Select Fax Only Mode as your
receive mode. See Related Information: Receive Modes
Will you be using your Brother machine on the same line as your telephone?
• Do you want to receive voice calls and faxes automatically?
The Fax/Tel Mode is used when sharing the Brother machine and your telephone on the
same line. Select Fax/Tel Mode as your receive mode. See Related Information: Receive
Modes
Important Note: You cannot receive voice messages on either Voice Mail or an
answering machine if you selected the Fax/Tel Mode.
• Do you expect to receive very few faxes?
Choose Manual Mode as your receive mode. You control the telephone line and must
answer every call yourself. See Related Information: Receive Modes
Press
(FAX).
1
2
3
Press Menu.
Press a or b to display the Faxoption, and then press OK.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Press a or b to display the Setup Receiveoption, and then press OK.
Press a or b to display the Receive Modeoption, and then press OK.
4
5
If you cannot change the Receive Modeoption, make sure the Distinctive Ring feature is
set to Off.
Press a or b to select the Fax only, Fax/Tel, External TAD, or Manualoption, and
then press OK.
6
7
Press Stop/Exit.
Related Information
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the F/T Ring Time
(Pseudo/Double-ring)
Set the Number of Rings
Before the Machine
Answers (Ring Delay)
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
When you set the Receive Mode to Fax/Tel
Mode, if the call is a fax, your machine will
automatically receive it. However, if it is a
voice call, the machine will sound the F/T ring
(pseudo/double-ring) for the time you set in
the F/T Ring Time option. When you hear the
F/T ring, it means that a voice caller is on the
line.
When somebody calls your machine, you will
hear the normal telephone ring sound. The
number of rings is set in the Ring Delay
option.
• The Ring Delay setting sets the number
of times the machine rings before it
answers in the Fax Only Mode and the
Fax/Tel Mode.
• The F/T Ring Time feature works when
you set Fax/Tel Mode as the Receive
Mode.
• If you have external or extension
telephones on the same line as the
machine, keep the Ring Delay setting
of 4.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone.
Press
(FAX).
1
2
3
Press
(FAX).
1
2
3
Press Menu.
Press Menu.
Press a or b to display the Faxoption,
and then press OK.
Press a or b to display the Faxoption,
and then press OK.
Press a or b to display the Setup
Receiveoption, and then press OK.
4
5
6
Press a or b to display the Setup
Receiveoption, and then press OK.
4
5
6
Press a or b to display the Ring Delay
option, and then press OK.
Press a or b to display the F/T Ring
Timeoption, and then press OK.
Press a or b to select the number of
rings you want the line to ring before the
machine answers, and then press OK.
Press a or b to display how long the
machine will ring to alert you that you
have a voice call, and then press OK.
Press Stop/Exit.
7
Press Stop/Exit.
7
If you select 00, the machine will answer
immediately and the line will not ring at all
(available only for some countries).
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Speed Dial Numbers
Store Numbers
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Use the Speed Dial numbers to store up to
200 numbers with a name.
Store fax and telephone numbers in the
machine for quick dialing and broadcasting
faxes to groups. When you dial a stored
number, the LCD displays the number.
Press
Press
(FAX).
1
2
If you lose electrical power, the Address
Book numbers that are in the machine's
memory will not be lost.
twice and enter a three-digit
Speed Dial code (001 - 200).
Store One Touch Dial
Numbers
If a number is not stored there, the LCD
displays Register Now?.
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Press 1 to select Yes.
3
4
You can store eight One Touch Dial numbers
on the four One Touch buttons. To access
One Touch Dial Numbers 5 to 8, hold down
Shift as you press the One Touch button.
Enter the telephone or fax number (up
to 20 digits), and then press OK.
Do one of the following:
5
• Enter the name using the dial pad (up
to 15 characters), and then press
OK.
Press
(FAX).
1
2
• To store the number without a name,
press OK.
Press the One Touch button where you
want to store the number.
If a number is not stored there, the LCD
displays Register Now?.
Change or Delete One Touch
Dial Numbers
Press 1 to select Yes.
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
3
4
Enter the telephone or fax number (up
to 20 digits), and then press OK.
Press Menu.
1
Do one of the following:
5
Press a or b to display the Faxoption,
and then press OK.
2
• Enter the name using the dial pad (up
to 15 characters), and then press
OK.
Press a or b to display the Address
3
• To store the number without a name,
press OK.
Bookoption, and then press OK.
Press a or b to display the One Touch
Dialoption, and then press OK.
4
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the One Touch button you want to
change or delete.
Do one of the following:
5
6
6
• To change the stored fax or
telephone number and name:
Do one of the following:
a. Press 1.
• To change the stored name and
number:
b. Edit the number and name:
To edit the stored number or
a. Press 1.
name, press d or c to move the
cursor to the character you want
to change, and then press Clear.
b. Edit the name and number:
To edit the stored name or
number, press d or c to move the
cursor to the character you want
to change, and then press Clear.
Enter the correct character, and
then press OK.
• To delete the stored fax or telephone
number and name:
Enter the correct character, and
then press OK.
a. Press 2.
b. Press 1.
• To delete the stored name and
number:
• To exit without making a change,
press Stop/Exit.
a. Press 2.
b. Press 1 to confirm.
• To exit without making a change,
press Stop/Exit.
Press Stop/Exit.
7
Press Stop/Exit.
7
Change or Delete Speed Dial
Numbers
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
You can change or delete Speed Dial Codes.
Press Menu.
1
Press a or b to display the Faxoption,
and then press OK.
2
Press a or b to display the Address
3
Bookoption, and then press OK.
Press a or b to display the Speed Dial
option, and then press OK.
4
Enter the Speed Dial code you want to
5
change or delete, and then press OK.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Services and External Devices
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
You may be able to use the following services and connections with your Brother machine.
These are summaries of ways to connect your machine. For details about each topic, see the
Online User's Guide.
Voice Mail
Voice Over Internet Protocol
(VoIP)
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
If you have voice mail service and your
Brother machine on the same line, they will
conflict with one another when receiving
incoming calls. If you want the Brother
machine to share a single line with your voice
mail, you must either put the Brother
machine's in Manual Mode or subscribe to
your telephone company’s Distinctive Ring
service.
VoIP is a phone system that uses an Internet
connection instead of a traditional telephone
line. Telephone providers frequently bundle
VoIP with Internet and cable services. Your
Brother machine may not work with some
VoIP systems. For more information, contact
your VoIP provider.
Connection of an External
Telephone Answering
Device (TAD)
Related Information
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Distinctive Ring
Your Brother machine can automatically
receive faxes when it shares a line with an
external TAD. You must connect the TAD to
the jack labeled EXT. on the Brother machine
and set the machine's Receive Mode to
External TAD.
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Distinctive Ring is a telephone-company
service that allows you to have two different
phone numbers on a single line. Each
telephone number has its own ring pattern.
You can program your Brother machine to
automatically receive faxes on one of the two
numbers.
Related Information
Related Information
External and Extension
Telephones
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
You can connect a separate telephone to the
jack labeled EXT. on the Brother machine. If
39
Download from Www.Somanuals.com. All Manuals Search And Download.
you answer an incoming fax on the telephone,
you can make the machine receive it by
pressing * 5 1, or by pressing Fax Start, and
then choosing Receive. If you answer an
incoming fax on an extension telephone that
shares the line with the Brother machine, you
can transfer the fax to the machine by
pressing * 5 1.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Send and Receive a Fax Using Your Machine
Enter the fax number.
Send a Fax
3
• Using the dial pad
Related Models:
Enter the fax number using the dial
pad.
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Press
(FAX).
1
2
Do one of the following:
• Place the document face up in the
ADF.
(If you are faxing multiple pages, we
recommend using the ADF.)
• Using the One Touch Buttons
Choose a contact stored on a One
Touch button.
• Place the document face down on
the scanner glass.
• Using the Speed Dial Codes
Enter the fax number by pressing
twice, and then enter the three-digit
Speed Dial code.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Start.
4
The machine scans and sends the
document.
If you placed the document on the
scanner glass, follow the instructions
in the table:
Option
Description
Yes
To scan the next page,
press 1 to select the Yes
option, and then place
the next page on the
scanner glass.
Press OK to scan the
page.
No(Send)
When you have scanned
the last page, press 2 to
select the No(Send)
option (or press Start
again).
The machine sends the
document.
• To stop faxing, press Stop/Exit.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax Using Your Computer (PC-FAX)
Send Faxes from Your
Computer
Receive Faxes on Your
Computer (Windows only)
®
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
The Brother PC-FAX feature lets you send a
file, created in any application on your
computer, as a standard fax and even attach
a cover page.
Use Brother's PC-FAX software to receive
faxes on your computer, screen them, and
print only those faxes you want.
For more information, see the Online User's
Guide: PC-FAX Overview (Macintosh)
From your application select File, and
then Print.
1
(The steps may vary depending on your
application.)
• Even if you turn off your computer (at
night or on the weekend, for example),
your machine will receive and store your
faxes in its memory. The number of
received faxes that are stored in the
memory appears on the LCD.
The Print dialog box appears.
Select the Brother PC-FAX.
2
Click OK.
• When you start your computer and the
PC-Fax Receive software runs, your
MFC transfers your faxes to your
computer automatically.
3
The Brother PC-FAX user interface
appears.
• For PC-Fax Receive to work, the PC-
FAX Receive software must be running
on your computer.
Enter the recipient’s fax number.
4
a. Use your computer keyboard or click
the Brother PC-FAX user interface's
numeric keypad.
• Before you can set up PC-Fax Receive,
you must install the MFL-Pro Suite
software on your computer. Make sure
your Brother machine is connected to
your computer and turned on.
b. Click
.
You can also select a stored number from
• If your machine displays an error and is
unable to print faxes from memory, use
PC-FAX to transfer your faxes to a
computer.
the Address Book.
Click Start.
5
Your document is sent to the Brother
machine and then faxed to the recipient.
• PC-Fax Receive is not available for
Macintosh.
Contact the application's vendor if you need
more support.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Do one of the following:
Press a or b to select the Onor Off
option for the Backup Printoption,
and then press OK.
1
9
®
®
• (Windows XP, Windows Vista and
®
Windows 7)
Click Start > All Programs >
Brother > Brother Utilities.
If you choose On, the machine will print
the fax at your machine before
transferring it to your computer so you will
have a copy.
Click the drop-down list and select
your model name (if not already
selected). Click PC-FAX Receive in
the left navigation bar, and then click
Receive.
10Press Stop/Exit.
®
• (Windows 8)
Click
(Brother Utilities), and
then click the drop-down list and
select your model name (if not
already selected).
Click PC-FAX Receive in the left
navigation bar, and then click
Receive.
Press Menu.
2
3
Press a or b to display the Faxoption,
and then press OK.
Press a or b to display the Remote Fax
Optoption, and then press OK.
4
5
6
Press a or b to display the PC Fax
Receiveoption, and then press OK.
Press a or b to select the Onoption, and
then press OK.
The LCD displays a reminder to start the
PC-FAX Receive program on your
computer.
Press OK.
7
8
Press a or b to display <USB>or your
computer name, and then press OK.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
A
Use this section to resolve problems you may encounter when using your Brother machine.
Identify the Problem
Even if there seems to be a problem with your machine, you can correct most problems yourself.
First, check the following:
• The machine's power cord is connected correctly and the machine's power is on.
• All of the machine's orange protective parts have been removed.
• Paper is inserted correctly in the paper tray.
• The interface cables are securely connected to the machine and the computer.
• Check the LCD or the machine's status in Status Monitor on your computer.
Find the Error
Find the Solution
Using the Status Monitor
• A green icon indicates the normal stand-by
condition.
• A yellow icon indicates a warning.
• A red icon indicates an error has occurred.
• A gray icon indicates the machine is
offline.
• Click the Troubleshooting button to
access Brother's troubleshooting website.
• Double-click the
icon in the task tray.
®
• (Windows ) If you check Load Status
Monitor on Startup, the Status Monitor will
launch automatically each time you start your
PC.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Find the Error
Find the Solution
Using the LCD
1. Follow the messages on the LCD.
2. See the Online User's Guide: Error and
Toner Low
xxxxxxxxxx
Maintenance Messages
3. Visit Frequently Asked Questions (FAQs)
on the Brother Solutions Center at
Error and Maintenance Messages
The most common error and maintenance messages are shown in the table.
Error Message
Cause
Action
2-sided Disabled
The back cover of the
machine is not closed
completely.
Close the back cover of the machine
until it locks in the closed position.
(For automatic 2-sided
printing models)
Cartridge Error
The toner cartridge is not
installed correctly.
Remove the toner cartridge and drum
unit assembly. Take out the toner
cartridge, and put it back in the drum
unit again. Reinstall the toner
cartridge and drum unit assembly in
the machine.
Put the Toner
Cartridge back in
Document Jam
Drum End Soon
The document was not
Remove the jammed paper from the
inserted or fed correctly, or ADF unit.
the document scanned from
the ADF was too long.
The drum unit is near the
end of its life.
Order a new drum unit before you get
the Replace Drummessage.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Cause
Action
Drum !
The corona wire on the
Clean the corona wire on the drum
drum unit must be cleaned. unit.
The drum unit or the toner
cartridge and drum unit
assembly is not installed
correctly.
Put the toner cartridge in the drum
unit. Then reinstall the toner cartridge
and drum unit assembly in the
machine.
Jam 2-sided
The paper is jammed
underneath the paper tray
or the fuser unit.
Pull the paper tray and the 2‑sided
tray out completely, open the back
cover and then remove the jammed
paper. Close the back cover, and put
the paper tray and the 2-sided tray
firmly back in the machine.
(For automatic 2-sided
printing models)
Jam Inside
Jam Rear
The paper is jammed inside Open the front cover and remove the
the machine.
toner cartridge and drum unit
assembly. Pull out the jammed paper.
Close the front cover. If the error
message remains, press Start.
The paper is jammed in the Open the fuser cover and remove the
back of the machine.
jammed paper. Close the fuser cover.
If the error message remains, press
Start.
Jam Tray
The paper is jammed in the Pull the paper tray out completely and
paper tray.
remove the jammed paper. Put the
paper tray firmly back in the machine.
Manual Feed
Manual was selected as
the paper source in the
printer driver when there
was no paper in the manual
feed slot.
Place paper in the manual feed slot.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Cause
Action
No Paper
The machine is out of
paper, or paper is not
loaded correctly in the
paper tray.
Do one of the following:
• Refill paper in the paper tray. Make
sure the paper guides are set to
the correct size.
• Remove the paper and load it
again. Make sure the paper guides
are set to the correct size.
• Make sure not to overfill the paper
tray.
No Toner
The toner cartridge is not
installed or is not installed
correctly.
Remove the drum unit and toner
cartridge assembly. Install the toner
cartridge in the drum unit correctly.
Reinstall the toner cartridge and drum
unit assembly in the machine. If the
problem continues, replace the toner
cartridge.
Print UnableXX
The machine has a
mechanical problem.
• (MFC-L2680W/MFC-L2700DW/
MFC-L2705DW)
To prevent you from losing the
received fax data in the machine's
memory, transfer the data to
another Fax machine or to your
computer before turning off the
machine.
• Press and hold
to turn off the
machine, wait a few minutes, and
then turn it on again.
• If the problem continues, contact
Brother Customer Service.
Contact Brother Customer Service
at:
1-877-BROTHER
(1-877-276-8437) (in USA)
Canada)
or to locate a Brother Authorized
Service Center, visit:
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Cause
Action
Replace Drum
It is time to replace the
drum unit.
Replace the drum unit.
The drum unit counter was Reset the drum unit counter.
not reset when a new drum
was installed.
See the instructions included with the
new drum unit. For more information,
see the Online User's Guide::
Replace the Drum Unit
Replace Toner
The toner cartridge is at the Replace the toner cartridge with a
end of its life. The machine new one.
stops all print operations.
While memory is available,
faxes are stored in the
memory.
Scan UnableXX
The machine has a
mechanical problem.
• (MFC-L2680W/MFC-L2700DW/
MFC-L2705DW)
To prevent you from losing the
received fax data in the machine's
memory, transfer the data to
another Fax machine or to your
computer before turning off the
machine.
• Press and hold
to turn off the
machine, and then turn it on again.
• If the problem continues, contact
Brother Customer Service.
Contact Brother Customer Service
at:
1-877-BROTHER
(1-877-276-8437) (in USA)
Canada)
or to locate a Brother Authorized
Service Center, visit:
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Cause
Action
Self-Diagnostic
The temperature of the
fuser unit does not rise to a
specified temperature within
the specified time.
• (MFC-L2680W/MFC-L2700DW/
MFC-L2705DW)
To prevent you from losing the
received fax data in the machine's
memory, transfer the data to
another Fax machine or to your
computer before turning off the
machine.
The fuser unit is too hot.
• Press and hold
to turn off the
machine, wait a few seconds, and
then turn it on again. Leave the
machine idle for 15 minutes with
the power on.
Size Error DX
The paper size specified in Press Stop/Exit. Choose a paper size
the printer driver and the
machine's menu are not
available for automatic 2-
sided printing.
supported by 2-sided printing.
(For automatic 2-sided
printing models)
Paper sizes available for automatic 2-
sided printing are Letter, Legal and
Folio.
The paper in the tray is not Load the correct size of paper in the
the correct size and is not
available for automatic 2-
sided printing.
tray and set the tray for that paper
size.
Paper sizes available for automatic 2-
sided printing are Letter, Legal and
Folio.
Size mismatch
The paper in the tray is not Load the correct size of paper in the
the correct size.
tray and set the size of paper to the
tray.
Toner Ended
Toner Low
The toner cartridge is at the Replace the toner cartridge with a
end of its life.
new one.
If the LCD displays this
Order a new toner cartridge now so
message you can still print. you have it ready when the LCD
The toner cartridge is near displays Replace Toner.
the end of its life.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax and Telephone Problems
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
If you cannot send or receive a fax, check the following:
Connect one end of the telephone line cord to the area labelled "LINE", and then connect
the other end of the telephone line cord directly to a telephone wall jack.
1
If you can send and receive faxes when the telephone line is directly connected to the fax,
the problem may be unrelated to the machine. Please contact your telephone service
provider for connection issues.
Check the receive mode.
2
See Related Information:
• Receive Modes
• Choose the Correct Receive Mode
Try changing the compatibility settings.
3
You may be able to send and receive faxes by lowering the connection speed.
For more information, see Related Information: Set Telephone Line Compatibility for
Interference and VoIP Systems
If the problem still is not resolved, turn the machine off, and then turn it on.
IMPORTANT
(MFC-L2680W/MFC-L2700DW/MFC-L2705DW)
To prevent you from losing the received fax data in the machine's memory, transfer the data to
another Fax machine or to your computer before turning off the machine.
Related Information
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting for Other Fax Problems
Related Models:
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
Difficulties
Suggestions
Cannot send a fax.
Check all line cord connections. Make sure the telephone line cord is
plugged into the telephone wall jack and the LINE jack of the machine.
If you subscribe to DSL, VoIP or MagicJack services, call your service
provider for connection instructions.
Make sure you pressed Fax and the machine is in Fax mode.
Print the Transmission Verification Report and check for an error.
Contact your administrator to check your Secure Function Lock
Settings.
Ask the other party to check that the receiving machine has paper.
Cannot receive a fax. Make sure your machine has a dial tone by pressing Hook. If you hear
static or interference on your fax line, contact your local telephone
company.
If you are using a telephone answering machine (External TAD
mode) on the same line as the Brother machine, make sure your
answering machine is set up correctly.
1. Plug the telephone line cord directly from the wall telephone jack to
your Brother machine’s LINE jack.
2. Remove the protective cap from your Brother machine’s EXT jack,
and then plug the telephone line cord from your answering machine
into the EXT jack.
3. Set your answering machine to answer within four rings.
If you are having problems receiving faxes or voice messages, set
your answering machine to answer within two or three rings.
4. Record the outgoing message on your answering machine.
• Record five seconds of silence at the beginning of your outgoing
message.
• Limit your speaking to 20 seconds.
• End your outgoing message with your Fax Receive Code for
people sending manual faxes. For example: “After the beep,
leave a message or press *51 and Start to send a fax.”
5. Set your answering machine to answer calls.
6. Set your Brother machine’s Receive Mode to External TAD.
Make sure your Brother machine’s Easy Receive feature is turned On.
Easy Receive allows you to receive a fax even if you answered the call
on an external or extension telephone.
Received faxes
Turn on Auto Reduction.
appear as split pages.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Difficulties
Suggestions
Dialing does not work. Check all line cord connections.
(No dial tone)
Poor sending quality. Try changing your resolution to Fineor S.Fine.
Make a copy to check your machine’s scanner operation. If the copy
quality is not good, clean the scanner.
For more information, see the Online User's Guide: Telephone and Fax
Problems
Vertical black lines
when sending.
Black vertical lines on faxes you send are typically caused by dirt or
correction fluid on the glass strip.
For more information, see the Online User's Guide: Clean the Scanner
53
Download from Www.Somanuals.com. All Manuals Search And Download.
select your model name (if not
already selected). Click SCAN in the
left navigation bar, and then click
Scanners and Cameras.
Print or Scan Problems
If you cannot print or scan a document,
check the following:
b. Do one of the following:
®
(Windows XP)
All of the machine's protective parts
have been removed.
Right-click a scanner device, and
then select Properties. The Network
Scanner Properties dialog box
appears.
1
The interface cables are securely
2
connected to the machine and the
®
®
(Windows Vista , Windows 7 and
computer.
®
Windows 8)
Click the Properties button.
The printer or scanner driver has been
3
c. Click the Network Setting tab to
installed correctly.
confirm the machine's IP address.
To make sure the printer or scanner
driver is installed on your computer, see
the Online User's Guide: Other
Problems
Try printing with your machine. If the
problem still remains, uninstall and
reinstall the printer driver.
(Scan problem only)
4
If the problem still remains after trying all
the above, try the following:
Confirm the machine is assigned with an
available IP address. (Windows )
5
®
For a USB interface connection
a. Do one of the following:
• Change the USB cable for a new
one.
®
(Windows XP)
Click Start > Control Panel >
Printers and Other Hardware >
Scanners and Cameras.
• Use a different USB port.
For a Wired Network connection
• Change the LAN cable for a new one.
• Use a different LAN port on your hub.
®
(Windows Vista )
Click
> (Start) > Control Panel
• Make sure your machine's wired
connection is on.
> Hardware and Sound >
Scanners and Cameras.
For more information, see the Online
User's Guide: Select Your Network
Connection Type
®
(Windows 7)
Click
(Start) > All Programs >
For a Wireless Network connection
Brother > Brother Utilities.
• Confirm your machine's Wi-Fi light
status.
Click the drop-down list and select
your model name (if not already
selected). Click SCAN in the left
navigation bar, and then click
Scanners and Cameras.
If the Wi-Fi light on your machine's
control panel is blinking, your
machine has not been connected to
the WLAN access point. Set up the
wireless network connection again.
®
(Windows 8)
If the Wi-Fi light on your machine's
control panel is off, the WLAN
Click
(Brother Utilities), and
then click the drop-down list and
54
Download from Www.Somanuals.com. All Manuals Search And Download.
connection setting is disabled.
Enable the WLAN connection and set
up the wireless network connection.
For more information, see the Online
User's Guide: Introduction to Your
Brother Machine
If you cannot print on both sides of paper,
check the following:
Change the paper size setting in the
6
printer driver to Letter, Legal, or Folio.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Document and Paper Jams
Find the Jammed Document
or Paper
Clear the Document Jam
If your document or paper jams inside the
machine, the LCD message or Status Monitor
will help you to find it.
The Document is Jammed in the Top of the
ADF
Open the ADF cover.
1
1
Pull the jammed document out to the
left.
2
5
4
2
3
1. Document Jam
2. Jam Rear
3. Jam 2-sided
4. Jam Tray
5. Jam Inside
Close the ADF cover.
3
The Document is Jammed under the
Document Cover
Pull the jammed document out to the
right.
4
If the document rips or tears, remove all
small paper scraps to prevent future
jams.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove Small Paper Scraps Jammed in
the ADF
Clear the Paper Jam
Always remove the remaining paper from the
paper tray and straighten the stack when you
are adding new paper. This helps prevent
multiple sheets of paper from feeding through
the machine at one time and prevents paper
jams.
Insert a strip of stiff paper, such as
5
cardstock, into the ADF to push any
small paper scraps through.
Paper is Jammed in the Paper Tray
If the LCD displays Jam Tray, do the
following:
Pull the paper tray completely out of the
machine.
1
If the document rips or tears, remove all
small paper scraps to prevent future
jams.
Press Stop/Exit.
6
Slowly pull out the jammed paper.
2
The easiest way to remove the paper is
to use both hands to pull it downward.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Fan the stack of paper to prevent further
jams, and slide the paper guides to fit
the paper size.
Paper is Jammed in the Output
Paper Tray
3
When the paper is jammed in the output
paper tray, do the following:
Use both hands to open the scanner.
1
Remove the paper.
2
Make sure the paper is below the
maximum paper mark (b b b).
4
Push the scanner down with both hands
to close it.
3
Put the paper tray firmly back in the
machine.
5
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper is Jammed at the Back of the
Machine
WARNING
HOT SURFACE
If the machine's control panel or the Status
Monitor indicates that there is a jam in the
back (Rear) of the machine, complete the
following:
The machine's internal parts will be extremely
hot. Wait for the machine to cool down before
touching them.
Leave the machine turned on for 10
1
minutes. This allows the internal fan to
cool the extremely hot parts inside the
machine.
Open the back cover.
2
Use both hands to gently pull the
4
jammed paper out of the fuser unit.
Pull the blue tabs at the left and right
3
sides toward you to release the fuser
cover.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Close the fuser cover. Make sure the
blue tabs at the left and right sides lock
into place.
Paper is Jammed inside the
Machine
5
If the machine's control panel or the Status
Monitor indicates that there is a jam inside the
machine, complete the following:
Leave the machine turned on for 10
1
minutes. This allows the internal fan to
cool the extremely hot parts inside the
machine.
Open the front cover.
2
Close the back cover until it locks in the
closed position.
6
Remove the toner cartridge and drum
unit assembly.
3
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper is Jammed in the 2-sided
Tray
WARNING
HOT SURFACE
Related Models:
DCP-L2520DW/DCP-L2540DW/MFC-L2700DW/
MFC-L2705DW
The machine's internal parts will be extremely
hot. Wait for the machine to cool down before
touching them.
If the machine's control panel or the Status
Monitor indicates that there is a jam in the 2-
sided paper tray, do the following:
Leave the machine turned on for 10
1
minutes. This allows the internal fan to
cool the extremely hot parts inside the
machine.
Pull the paper tray completely out of the
machine.
2
Pull out the jammed paper slowly.
4
At the back of the machine, pull the
3
2‑sided tray completely out of the
Install the toner cartridge and drum unit
machine.
5
assembly into the machine.
Close the front cover.
6
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Pull the jammed paper out of the
machine or out of the 2‑sided tray.
If paper is not caught inside the 2-sided
tray, open the back cover.
4
6
WARNING
HOT SURFACE
The machine's internal parts will be extremely
hot. Wait for the machine to cool down before
touching them.
Remove paper that may have jammed
under the machine due to static
electricity.
5
Use both hands to gently pull the
7
jammed paper out of the back of the
machine.
Close the back cover until it locks in the
closed position.
8
Put the 2-sided tray firmly back in the
rear of the machine.
9
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Put the paper tray firmly back in the
front of the machine.
10
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
B
How to Enter Text on Your Brother Machine
DCP-L2520DW/DCP-L2540DW
When setting certain options, such as the Network Key, you must enter characters on the
machine:
• Hold down or repeatedly press a or b to select a character from this list:
0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ(space)!"#$
%&'()*+,-./:;<=>?@[]^_
• Press OK when the character or symbol you want is displayed, and then enter the next
character.
• Press Clear to delete characters entered incorrectly.
MFC-L2680W/MFC-L2700DW/MFC-L2705DW
When setting certain options, such as the Station ID, you must enter characters. The available
number and letters are printed on each dial pad button.
The buttons 0, # and * are used for special characters.
• Press the appropriate dial pad button the number of times shown in this reference table to
access the character you want.
Press
button
One
time
Two
times
Three
times
Four
times
Five
times
Six
times
Seven Eight
Nine
times
times
times
1
2
3
4
5
6
7
8
9
@
a
d
g
j
.
/
c
f
1
A
D
G
J
@
B
.
/
1
a
d
g
j
@
b
e
h
k
b
e
h
k
n
q
u
x
C
F
I
2
3
4
5
6
R
8
Y
E
i
H
K
l
L
m
p
t
o
r
M
s
N
P
O
Q
V
X
m
S
t
n
7
u
9
v
y
T
z
U
W
w
Z
For options that do not allow lower case characters, use the following table:
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Press button
One time
Two times
Three times
Four times
Five times
2
3
4
5
6
7
8
9
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
A
D
G
J
L
M
P
T
O
R
V
Y
M
7
T
9
W
• Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a
name, press c twice between characters.
• Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to
the incorrect character, and then press Clear.
• Repeating letters
To enter a letter on the same button as the previous letter, press c to move the cursor right
before pressing the button again.
• Special symbols and characters
Press *, # or 0, then press d or c to move the cursor to the symbol or character you want.
Press OK to select it. The symbols and characters that are available on dial pad buttons are
shown in the table.
Press *
Press #
Press 0
(space) ! " # $ % & ’ ( ) * + , - . / €
: ; < = > ? @ [ ] ^ _ \ ~ ‘ | { }
É À È Ê Î Ç Ë Ö0
Related Information
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplies
When the time comes to replace supplies such as the toner or drum, an error message will
appear on your machine's control panel or in the Status Monitor. For more information about the
Brother reseller.
The toner cartridge and drum unit are two separate parts.
Toner Cartridge
Standard Toner:
TN-630
Drum Unit
DR-630
High Yield Toner:
TN-660
®
If you are using Windows , double-click the Brother CreativeCenter icon on your
desktop to access our FREE website designed as a resource to help you easily
create and print customized materials for business and home use with photos, text
and creative touch. Mac users can access Brother CreativeCenter at this web
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
C
Fax, from PC........................................43
A
Accessories and Supplies..................... iv
ADF (Automatic Document Feeder)........
...................................... 21,ꢀ24,ꢀ29,ꢀ41
Automatic
J
Jams.................................................... 56
document ....................................... 56
L
B
Labels.................................................. 13
LCD (Liquid Crystal Display)..................1
Brother
Brother numbers.................................i
FAQs (Frequently Asked Questions)..i
product support..................................ii
service centers.................................. ii
M
Manual
receive ......................................32,ꢀ34
Manual feed slot.............................17,ꢀ19
C
Control Panel Overview......................... 1
Copy.................................................... 21
settings............................................22
O
One Touch Dial
changing .........................................37
storing ............................................ 37
D
Date and time........................................ 9
Distinctive Ring.............................. 34,ꢀ39
Document
P
Paper
type ................................................ 13
Print..................................................... 15
E
Envelopes............................................ 17
Error messages................................... 46
R
F
S
Fax
Scan.....................................................28
Speed Dial
changing .........................................38
storing ............................................ 37
Supplies............................................... 66
ring delay.........................................36
fax receive........................................... 34
67
Download from Www.Somanuals.com. All Manuals Search And Download.
T
TAD (Telephone Answering Device),
external..................................... 32,ꢀ39
Troubleshooting
document and paper jams ..............56
Error and Maintenance Messages . 46
fax and telephone problems ...........51
print or scan problems ....................54
V
Voice Mail.......................................34,ꢀ39
VoIP systems................................. 32,ꢀ39
W
Warranties
Notice - Disclaimer ........................... v
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother International Corporation
200 Crossing Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, Canada H9B 3H6
Visit us on the World Wide Web
These machines are approved for use in the country of purchase only. Local Brother
companies or their dealers will support only machines purchased in their own countries.
USA/CAN
Version B
Download from Www.Somanuals.com. All Manuals Search And Download.
|