Model PT-1600
Common Functions & Commands
®
1. Cut
Bar Code
1. GLB (Global) Size
1. Bar Code
1 (1 = cut-pause; no chain print)
2 (2 = no cut-pause; no chain print)
3 (3 = cut-pause; chain print)
Set font size for label.
Type in bar code data.
Auto
1mm
2mm
3mm
4mm
6mm
9mm
12mm
4 (4 = no cut-pause; chain print)
1. Parameter Settings
2. Contrast
Set settings for bar code.
+ 2 to –2 ( 0 = default, += darker,
— = lighter)
A. Protocol
Specify protocol.
Code 39
Code 128
EAN128
CODABAR
UPC-E
UPC-A
EAN8
EAN13
I-2/5
3. Auto Reduction
If label is set to AUTO size, text size
2. GLB (Global) Wide
or width will change based on label
Set label font width.
Minimum
Narrow
length.
Text Size
Text Width
Bar Code
Functions
B. Width
Normal
Wide
Format
Specify width of bar code graphic.
4. Length Adjustment
Increase or decrease the label length
if the length differs from actual.
+3 to -1, 0 = default
Small
Medium
Large
3. GLB (Global) Style
Setup
Menu
Set label font style - individual line
C. Under Number
style overrides settings.
Normal
Specify whether the number is printed
5. Symbol Save
under the bar code.
Personal Category is full, symbols
Bold
On
Off
will be added (on) or not (off).
Outline
On
Off
Italic
Italic + Bold
Italic + Outline
D. Check Digit
Code 39, I-2/5 and CODABAR only,
6. Units
specify Check Digit on/off.
Set unit for measurement.
On
Off
4. Align
inch
mm
Specify text alignment.
Left
(Line)
Style
Justify
Right
Center
7. Language
Set language for menus, settings
and messages.
English
1. Style
Set font style.
Normal
Bold
Outline
Italic
Italic + Bold
Italic + Outline
Français
(Label)
Frame
1. Frame
8. Version Info
Version information for P-touch
software & symbol set.
Main
Choose from 14 different borders.
1. Size
(Line)
Size
Off
1 – 14
Set the size for an individual line.
Auto
1mm
2mm
3mm
4mm
6mm
9mm
12mm
Boot
Char-Set (Character Set)
Symb-Set (Symbol Set)
(Label)
Clear
1. Clear
Clear text (and font) to start new label.
Text & Format
1. Copies
Text Only
1. Length
1-99
(Label)
Length
Specify label length.
Auto / 0.30 - 39.00inch
(Auto / 6 - 999mm)
2. Number (sequential labels)
Print
Options
Off
1. Label Type
1-99
Specify type of label printed.
Label
Type
2. Margin
Normal
Rotate
Rotate-Repeat
Port
Panel
Flag
Vertical
3. Block No.
Specify margin.
Choose the block numbers (start/end)
to print.
0.10 - 4.00inch (2 - 99mm)
4. Mirror (print text in reverse order)
©2003 Brother International Corporation, 100 Somerset Corporate
Boulevard, Bridgewater, NJ 08807. All rights reserved. All trademarks
and registered trademarks referenced herein are the property of their
Off
On
Download from Www.Somanuals.com. All Manuals Search And Download.
respective companies.
LN4394001
|