Quick Setup Guide
MFC-J450DW
MFC-J470DW
MFC-J475DW
Start Here
Thank you for choosing Brother, your support is important to us and we value your business. Your Brother product
is engineered and manufactured to the highest standards to deliver reliable performance, day-in and day-out.
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
Manuals in Spanish for this model are available on the enclosed CD-ROM.
Manuales en Español para este modelo están disponibles en el CD-ROM incluido.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
WARNING
or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
CAUTION
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
IMPORTANT
Notes tell you how to respond to a situation that may arise or give tips about how the operation
works with other features.
NOTE
Unpack the machine and check the components
1
Most of the illustrations in this Quick Setup Guide show the MFC-J470DW.
The components included in the box may differ depending on your country.
Black
Yellow
Cyan
Magenta
Quick Setup Guide
Starter Ink
Cartridges
CD-ROM
Basic User’s Guide
Product Safety Guide
Telephone Line Cord
1
If your computer does not have a CD-ROM drive, you can download the drivers from your model’s download page at
WARNING
Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the danger
of suffocation, keep these bags away from babies and children and dispose of them correctly.
NOTE
Save all packing materials and the box in case for any reason you must ship your machine.
USB cable
You need to purchase the correct USB cable.
We recommend using a USB 2.0 cable (Type A/B) that is no more than six feet (two meters) long.
USA/CAN Version 0
1
Download from Www.Somanuals.com. All Manuals Search And Download.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
NOTE
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
1
Before you connect the external telephone
answering machine, remove the white protective
cap a from the EXT. jack on the machine.
3
2
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
1
a Protective cap
Set the receive mode to External TADif you
have an external answering machine. See
For additional details, see Connecting an external
TAD (telephone answering device) in chapter 6 of
the Basic User’s Guide.
NOTE
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the white protective cap c from the EXT.
jack on the machine.
1
2
3
a Extension telephone
b External telephone
c Protective cap
3
Download from Www.Somanuals.com. All Manuals Search And Download.
d
Unpack the ink cartridge.
Turn the green release lever on the orange
protective packing a counterclockwise until it
clicks to release the vacuum seal. Then
remove the orange protective packing a as
shown.
Install the ink cartridges
3
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
IMPORTANT
• DO NOT shake the ink cartridges. If ink stains
your skin or clothing, wash with soap or
detergent at once.
NOTE
• DO NOT touch the cartridge in the area
indicated b, as this can cause the machine not
to function with the cartridge.
Make sure you install the Starter Ink Cartridges
included with your machine first.
a
Make sure that the power is turned on.
The LCD will show No Ink Cartridge.
2
1
b
Open the ink cartridge cover a.
1
c
Remove the orange protective part a.
2
1
1
NOTE
Do not throw away the orange protective part.
You will need it if you transport the machine.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
e
Take care to match the sticker color a with the
cartridge color b as shown in the diagram
below.
Install each ink cartridge in the direction of the
arrow on the label.
IMPORTANT
• DO NOT take out ink cartridges if you do not
need to replace them. If you do so, it may
reduce the ink quantity and the machine will not
know the quantity of ink left in the cartridge.
• DO NOT repeatedly insert and remove the
cartridges. If you do so, ink may seep out of the
cartridge.
1
• Once you open an ink cartridge, install it in the
machine and use it up within six months of
installation. Use unopened ink cartridges by
the expiration date written on the cartridge
package.
2
• DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out of
the cartridge.
• Brother strongly recommends that you do not
refill the ink cartridges provided with your
machine. We also strongly recommend that
you continue to use only Genuine Brother
Brand replacement ink cartridges. Use or
attempted use of potentially incompatible ink
and/or cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
f
Gently push the back of the ink cartridge
marked “PUSH” until it latches. After all the ink
cartridges are installed, close the ink cartridge
cover.
unauthorized third party ink and/or cartridges.
To protect your investment and obtain premium
performance from the Brother machine, we
strongly recommend the use of Genuine
Brother Supplies.
NOTE
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine. We
recommend you perform the next step while
waiting.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
c
Gently press and slide the paper width
guides a and then the paper length guide b to
fit the paper size.
Load plain Letter/A4
paper
4
Make sure that the triangular marks c on the
paper width guides a and paper length
guide b line up with the mark for the paper size
you are using.
a
b
Pull the paper tray a completely out of the
machine.
NOTE
1
Make sure the first printed page is Letter/A4 size.
1
3
Open the output paper tray cover a.
1
2
3
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
NOTE
Always make sure that the paper is not curled or
wrinkled.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
f
Gently adjust the paper width guides to the
paper with both hands. Make sure that the
paper width guides touch the edges of the
paper.
IMPORTANT
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
g
h
Close the output paper tray cover.
Slowly push the paper tray completely into the
machine.
NOTE
When you use Legal size paper, press and hold
the universal guide release button a as you slide
out the front of the paper tray.
i
While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
1
2
1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
b
c
d
Enter the two digits for the month on the dial
pad, and then press OK.
Check the print quality
5
Enter the two digits for the day on the dial pad,
and then press OK.
a
When the preparation process has finished, the
LCD shows Load Paper and Press Color
Start.
Press a or b to choose 12h Clockor 24h
Clock, and then press OK.
Press Color Start.
b
c
Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to the next step.
OK
e
f
Enter the time on the dial pad, and then press
OK.
(12h Clockonly)
Press a or b to choose AMor PM, and then
press OK.
If lines are missing, press 2 (No) and follow the
steps on the LCD.
Poor
Set the date and time
NOTE
6
You can change date, time, or clock type (12h or
24h) at any time. For more information, see
Setting the date and time in the Basic User’s
Guide.
The LCD displays the date and time. You can also
add the current date and time to each fax you send by
a
Enter the last two digits of the year on the dial
pad, and then press OK.
(e.g. Enter 1 3 for 2013.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless setup
(if needed)
Choose your language
(if needed)
7
8
When the Wi-Fi setup will start.message
appears on the LCD, read the message, and then
press OK to continue.
a
b
Press Menu.
Press a or b to choose Initial Setup.
Press OK.
®
c
d
e
Press a or b to choose Local Language.
Press OK.
NOTE
Press a or b to choose your language.
Press OK.
If you want to configure any of the options in
You will be able to configure the wireless settings
later.
Press Stop/Exit.
a
Press a or b to choose Yes.
Press OK.
wireless setup.
After finishing the wireless setup, return to
b
Press a or b to choose No.
Press OK.
setup.
®
Wireless setup instructions for Windows and
Macintosh users will be covered later, starting
NOTE
If a prompt message appears on the LCD, read it
and press OK to continue.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the correct Receive Mode
9
The correct Receive Mode is determined by the external devices and telephone subscriber services (Voice Mail,
Distinctive Ring, etc.) you have (or will be using) on the same line as the Brother machine.
For more information, see Using Receive Modes in chapter 5 of the Basic User’s Guide.
If you are not using this machine for faxing, go to the next step.
Will you be using a Distinctive Ring number for receiving faxes?
Brother uses the term “Distinctive Ring” but telephone companies may have other names for this service such
as Custom Ringing, RingMaster, Personalized Ring, Teen Ring, Ident-A-Call, and Smart Ring. See Distinctive
Ring in chapter 6 of the Basic User’s Guide for instruction on setting up your machine using this feature.
Will you be using Voicemail on the same telephone line as your Brother machine?
If you have Voice Mail on the same telephone line as your Brother machine, there is a strong possibility that
Voice Mail and the Brother machine will conflict with each other when receiving incoming calls. See Voice Mail
in chapter 6 of the Basic User’s Guide for instructions on setting up your machine using this service.
Will you be using a Telephone Answering Device on the same telephone line as your Brother machine?
Your external telephone answering device (TAD) will automatically answer every call. Voice messages are
stored on the external TAD and fax messages are printed. Choose External TADas your receive mode. See
the instructions below. For additional details, see Connecting an external TAD (telephone answering device) in
chapter 6 of the Basic User’s Guide.
Will you be using your Brother machine on a dedicated fax line?
Your machine automatically answers every call as a fax. Choose Fax Onlyas your receive mode. See the
instructions below.
Will you be using your Brother machine on the same line as your telephone?
Do you want to receive voice calls and faxes automatically?
The Fax/Telreceive mode is used when sharing the Brother machine and your telephone on the same
line. Choose Fax/Telas your receive mode. See the instructions below. For additional information see
Fax/Tel in chapter 5 of the Basic User’s Guide for instructions on setting up and using this receive mode.
Important Note: You cannot receive voice messages on either Voice Mail or an answering machine
when choosing the Fax/Telmode.
Do you expect to receive very few faxes?
Choose Manualas your receive mode. You control the phone line and must answer every call yourself.
See the instructions below.
a
b
c
d
e
f
Press Menu.
Press a or b to choose Fax. Press OK.
Press a or b to choose Setup Receive. Press OK.
Press a or b to choose Receive Mode. Press OK.
Press your preferred receive mode. Press OK.
Press Stop/Exit.
NOTE
If the Receive Mode option is not displayed, make sure the Distinctive Ring feature is set to Off. (See Turning
off Distinctive Ring in chapter 6 of the Basic User’s Guide.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
(USA only)
Set your Station ID
10
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.
Set your machine’s Station ID so that the date and
time appear on each fax you send.
If you are not using this machine for faxing, go to the
next step.
a
b
Press Menu.
Press a or b to choose Initial Setup.
Press OK.
c
d
e
Press a or b to choose Station ID.
Press OK.
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Transmission
Verification Report
11
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 of the Basic User’s
Guide.
NOTE
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, and then press Clear.
• For more information, see Entering Text in the
Basic User’s Guide.
Press
key
One
time
Two
times
Three
times
Four
times
Five
times
2
3
4
5
6
7
8
9
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
A
D
G
J
L
M
P
O
R
V
Y
M
7
T
T
9
W
f
Press Stop/Exit.
NOTE
If you make a mistake and want to start again,
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Tone or Pulse dialing
mode (Canada only)
Automatic Daylight
Saving Time
12
14
Your machine comes set for a Tone dialing service. If
you have a Pulse dialing (rotary) service, you need to
change the dialing mode.
You can set the machine to change automatically for
Daylight Saving Time. It will reset itself forward one
hour in the spring and backward one hour in the fall.
a
b
Press Menu.
a
b
Press Menu.
Press a or b to choose Initial Setup.
Press OK.
Press a or b to choose Initial Setup.
Press OK.
c
d
e
Press a or b to choose Tone/Pulse.
Press OK.
c
d
Press a or b to choose Date & Time.
Press OK.
Press a or b to choose Pulse(or Tone).
Press OK.
Press a or b to choose Auto Daylight.
Press OK.
Press Stop/Exit.
e
f
Press a or b to choose On(or Off).
Press OK.
Press Stop/Exit.
Set the telephone line
compatibility (VoIP)
13
If you are connecting the machine to a VoIP service
(over the Internet), you need to change the
compatibility setting.
NOTE
If you are using an analog telephone line, you can
skip this step.
a
b
Press Menu.
Press a or b to choose Initial Setup.
Press OK.
c
d
e
Press a or b to choose Compatibility.
Press OK.
Press a or b to choose Basic(for VoIP).
Press OK.
Press Stop/Exit.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose your connection type
15
®
These installation instructions are for Windows XP Home, XP Professional, XP Professional x64 Edition,
®
®
®
Windows Vista , Windows 7, Windows 8, and Mac OS X v10.6.8, 10.7.x, 10.8.x.
NOTE
®
• For Windows Server 2003/2008/2008 R2/2012, the drivers can be found on your model’s download page
• If your computer does not have a CD-ROM drive, you can download the latest drivers, manuals and utilities
applications included on the CD-ROM may not be available as a download.
For USB interface cable
Macintosh, go to page 17
For Wireless Network
Windows® and Macintosh,
go to page 20
13
Download from Www.Somanuals.com. All Manuals Search And Download.
®
USB
Windows
For Windows® USB interface users
®
®
®
®
(Windows XP Home/XP Professional/Windows Vista /Windows 7/Windows 8)
b
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
Before you install
16
Make sure that your computer is ON and you are
logged on with Administrator rights.
NOTE
• DO NOT connect the USB cable yet.
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
c
d
Choose Local Connection (USB), and then
click Next.
• The CD-ROM includes Nuance™ PaperPort™
®
12SE. This software supports Windows XP
Home (SP3 or greater), XP Professional (SP3
or greater), XP Professional x64 Edition (SP2
®
or greater), Windows Vista (SP2 or greater),
®
®
Windows 7 and Windows 8. Update to the
®
latest Windows Service Pack before installing
MFL-Pro Suite.
• If the Windows Security screen appears, click
the check box and click Install to complete the
installation correctly.
Follow the on-screen instructions until the Plug
in the USB cable screen appears.
Install MFL-Pro Suite
17
a
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
NOTE
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
®
(For Windows 8: click the
(File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
• If the User Account Control screen appears,
click Allow or Yes.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
®
USB
Windows
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
Connect the USB cable
18
1
a
Lift the scanner cover until it locks securely into
the open position.
3
2
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
b
Connect the USB cable to the USB port
marked with a
symbol. You will find the
USB port inside the machine, as shown in the
callout below.
e
The installation will continue automatically.
The installation screens appear one after
another.
NOTE
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
f
If the Environmental Advice for Imaging
Equipment screen appears, click Next.
g
When the On-Line Registration screen
appears, follow the on-screen instructions.
Click Next.
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your computer.
h
i
If you do not want to set your machine as the
default printer, clear the Set as Default Printer
check box, and then click Next.
When the Setup is Complete window
appears, confirm the settings, and then click
Next.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
®
USB
Windows
b
The following screens will appear.
Finish and restart
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
19
• When the Brother Product Research and
Support Program screen appears, select
your preference and follow the on-screen
instructions.
a
Click Finish to restart your computer.
After restarting the computer, you must log on
with Administrator rights.
NOTE
• Internet access is required for the software
update and the Brother Product Research and
Support Program.
• When you install MFL-Pro Suite, Brother Help
will also be installed automatically. Brother
Help allows you to access the Brother
Solutions Center when you click
NOTE
in the task tray.
• If an error message appears during the
software installation, do one of the following:
®
®
- Windows XP, Windows Vista and
The installation is now
complete.
®
Finish
Windows 7 users: Run the Installation
Diagnostics located in
(Start) >
All Programs > Brother > MFC-XXXX
(where XXXX is your model name).
To install optional applications:
®
- Windows 8 users: To run the Installation
Now go to
Page 33
Diagnostics, double-click
(Brother
Utilities) on the desktop, and then click the
drop-down list and select your model name
(if not already selected). Click Tools in the
left navigation bar.
NOTE
®
Windows 8 users: If the Brother manuals
• Depending on your security settings, a
included on the CD-ROM are in PDF format, use
®
Windows Security or antivirus software
®
®
®
Adobe Reader to open them. If Adobe
window may appear when using the machine
or its software. Please allow or permit the
window to continue.
®
Reader is installed on your computer but you
®
®
cannot open the files in Adobe Reader , change
the file association for PDF (see How to open a
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Macintosh
For Macintosh USB interface users (Mac OS X v10.6.8, 10.7.x, 10.8.x)
b
Connect the USB cable to the USB port
marked with a
symbol. You will find the
Before you install
USB port inside the machine, as shown in the
callout below.
16
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
Connect the USB cable
17
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
NOTE
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Lift the scanner cover until it locks securely into
the open position.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Macintosh
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
e
Choose your machine from the list, and then
click Next.
1
3
2
f
When the Add Printer screen appears, click
Add Printer.
g
Choose your machine from the list. Click Add
and then click Next.
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
Install MFL-Pro Suite
18
NOTE
a
Put the CD-ROM into your CD-ROM drive.
(OS X v10.8.x)
b
c
d
Double-click the Start Here OSX icon to install.
If the model name screen appears, choose
your machine.
Select Brother MFC-XXXX CUPS (where XXXX
is your model name) driver from the Use pop-up
menu.
When the support screen appears, follow the
on-screen instructions if you want to download
Presto! PageManager. You can also
download Presto! PageManager later from
the Brother Support screen.
Click Next.
h
When this screen appears, click Close.
Choose Local Connection (USB), and then
click Next. Follow the on-screen instructions.
The installation of MFL-Pro Suite is now
complete.
After the installation, the Brother software will
search for the Brother device. This will take a
few moments to complete.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Macintosh
Download and install
Presto! PageManager
19
When Presto! PageManager is installed, OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a
On the Brother Support screen, click the
Presto! PageManager icon to go to the
Presto! PageManager download site, and
follow the on-screen instructions.
The installation is now
complete.
Finish
19
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
For wireless network interface users
Before you begin
16
First you must configure the wireless network settings of your machine to communicate with your access
point/router. After the machine is configured to communicate with your access point/router, computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
drivers and software. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal everyday document printing, place the Brother machine as close to the
network access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you
may want to consider choosing USB for the fastest throughput speed.
NOTE
If you have previously configured the wireless settings of the machine, you must reset the network settings
before you can configure the wireless settings again.
On your machine, press Menu. Press a or b to choose Network. Press OK.
Press a or b to choose Network Reset. Press OK.
Press 1 (Yes) twice to accept the change.
The following instructions are for infrastructure mode (connected to a computer through an access point/router).
Infrastructure Mode
5
1
4
2
3
a Access point/router
b Wireless network machine (your machine) connected to the access point/router
c Wireless-capable computer connected to the access point/router
d Wired computer connected to the access point/router
e Mobile device connected to the access point/router
Please make sure the wireless network settings of the machine match the access point/router.
NOTE
To set up your machine in Ad-hoc mode, see Connected to a Wireless Computer without a Wireless LAN
Access Point Router in the Network (Ad-Hoc Mode) in the Software and Network User’s Guide on the
CD-ROM.
To view the Software and Network User’s Guide:
1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.
®
For Windows :
2 Choose your model and the language. The CD-ROM top menu will appear.
3 Click User’s Guides, and then click PDF/HTML documents.
4 Click Software and Network User’s Guide.
For Macintosh:
2 Double-click User’s Guides. Choose your model and the language.
3 Click User’s Guides, and then click Software and Network User’s Guide.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
Choose your wireless setup method
17
The following instructions will offer three methods for setting up your Brother machine on a wireless network. If
you began the wireless setup from step 7 on page 9, go to method b or c. For all other users, choose the method
you prefer for your environment.
®
®
a
Setup using the CD-ROM (Windows and Macintosh)
• It is recommended that you use a computer wirelessly connected to your network for this method.
• A USB cable might be needed in some cases.
Now go to
®
b
Manual setup from the control panel using the Setup Wizard (Windows , Macintosh and
mobile devices)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,
write down the wireless network settings of your wireless access point/router in the area below.
If you need assistance during setup and want to contact Brother Customer Service, make sure
you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating
this information.
Item
Record the current wireless network settings
SSID (Network Name)
Network Key*
* The Network Key may also be described as the Password, Security Key, or Encryption Key.
NOTE
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information?
1) Check the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
Now go to
21
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
d
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
Setup using the CD-ROM
(Windows® and Macintosh)
18
(Recommended), and then click Next.
For Macintosh Users:
Put the CD-ROM into your CD-ROM drive and
double-click Start Here OSX. Select Wireless
installation and follow the Wireless Device
Setup instructions on your computer screen.
®
For Windows Users:
®
If you are not using the Windows Firewall, see
the instructions provided with your firewall
software for information on how to add the
following network ports.
a
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 137 and 161.
NOTE
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
e
f
Follow the on-screen instructions to set up the
Brother machine.
®
(For Windows 8: click the
(File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
Your machine will now try to connect to your
wireless network. It may take a few minutes.
• If the User Account Control screen appears,
click Allow or Yes.
Wireless setup is now complete.
b
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
To install MFL-Pro Suite
®
For Windows users:
Now go to
c
Choose Wireless Network Connection, and
then click Next.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
e
Press 1 (Yes) to connect your machine using
WPS. (If you choose 2 (No) to continue manual
When the LCD shows Start WPS, press the
WPS button on your wireless access
point/router, and then press 1 (Next) to
Manual setup from the
control panel using the
Setup Wizard (Windows®,
18
Macintosh and mobile devices)
You must have the wireless settings you
page 21 before you proceed.
f
Enter the Network Key you wrote down in
choose each letter or number.
a
NOTE
The letters appear in this order: lower case, upper
case and then numbers. To move the cursor left
or right, press d or c.
(For more information, see Entering Text for
Press OK when you have entered all the
characters, then press 1 (Yes) to apply your
settings.
b
On your machine, press Menu.
Press a or b to choose Network. Press OK.
Press a or b to choose WLAN. Press OK.
Press a or b to choose Setup Wizard. Press
OK.
g
Your machine will now try to connect to your
wireless network. It may take a few minutes.
Wireless setup is now complete.
NOTE
c
d
When Enable WLAN?is displayed, press OK
to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, press a or b to
choose the SSID you wrote down in step 17-b
®
(Android™/iOS/Windows Phone) from your
mobile device’s application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User’s Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
If the wireless access point/router of the
selected SSID supports WPS, and the machine
If the machine asks you to enter a Network
http://solutions.brother.com/ and click Manuals
on your model’s page.
settings.
NOTE
To install MFL-Pro Suite, continue to
• If the list is blank, check that the wireless
access point/router has power and is
broadcasting the SSID. Move your machine
closer to the wireless access point/router and
• If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For more information, see Configure
Your Wireless Network When the SSID Is Not
Broadcast in the Software and Network User’s
Guide.
step 19.
®
For Windows users:
Now go to
Page 28
For Macintosh users:
Now go to
Page 31
24
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
One-push setup using
NOTE
WPS or AOSS™ (Windows®,
For mobile device users:
Macintosh and mobile devices)
18
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
• Download and install Brother iPrint&Scan
®
(Android™/iOS/Windows Phone) from your
mobile device’s application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User’s Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
http://solutions.brother.com/ and click Manuals
on your model’s page.
settings.
To install MFL-Pro Suite, continue to
step 19.
c
d
On your machine, press Menu.
Press a or b to choose Network. Press OK.
Press a or b to choose WLAN. Press OK.
®
For Windows users:
Press a or b to choose WPS/AOSSand press
OK.
When Enable WLAN?is displayed, press OK
to accept.
Now go to
Page 28
This will start the wireless setup wizard.
For Macintosh users:
Now go to
Page 31
NOTE
If your wireless access point/router supports WPS
and you want to configure your machine using the
PIN (Personal Identification Number) Method,
see Configure Your Wireless Network Using the
PIN Method of Wi-Fi Protected Setup™ (WPS) in
the Software and Network User’s Guide.
e
When the LCD instructs you to start WPS or
AOSS™, press the WPS or AOSS™ button on
your wireless access point/router (for more
information, see the instructions provided with
your wireless access point/router), and then
press OK on your machine.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
Wireless setup is now complete.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
Troubleshooting
If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this
information.
How can I find the wireless security information (SSID and Network Key*)
1) Check the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
* The Network Key may also be described as the Password, Security Key or Encryption Key.
Wireless LAN report
If the wireless LAN report that printed shows that the connection failed, check the error code on the printed report
and refer to the following instructions.
Error code
Recommended Solutions
The wireless setting is not activated, turn the wireless setting to ON.
- If a network cable is connected to your machine, disconnect it and turn the wireless setting
of your machine to ON.
TS-01
On your machine, press Menu.
Press a or b to choose Network. Press OK.
Press a or b to choose WLAN Enable. Press OK.
Press a or b to choose On. Press OK.
Press Stop/Exit.
The wireless access point/router cannot be detected.
1. Check the following 4 points.
- Make sure that the wireless access point/router is powered on.
- Move your machine to an obstruction-free area, or closer to the wireless access
point/router.
- Temporarily place your machine within about 3.3 feet (one meter) from the wireless
access point when you are configuring the wireless settings.
- If your wireless access point/router is using MAC address filtering, confirm the MAC
address of the Brother machine is allowed in the filter.
TS-02
2. If you manually entered the SSID and security information (SSID/authentication
method/encryption method/Network Key), the information may be incorrect.
Reconfirm the SSID and security information and re-enter the correct information as
necessary.
confirm.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
For Wireless Network Users
The Authentication/Encryption methods used by the selected wireless access point/router are
not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the wireless
access point/router.
Your machine supports the following authentication methods:
Authentication method
WPA-Personal
WPA2-Personal
Open
Encryption method
TKIP
AES
AES
WEP
None (without encryption)
WEP
TS-04
Shared key
If your problem is not solved, the SSID or network settings you entered may be incorrect.
Reconfirm the wireless network settings.
confirm.
For ad-hoc mode, change the authentication and encryption methods of your computer for
the wireless setting.
Your machine supports Open authentication method only, with optional WEP encryption.
The security information (SSID/Network Key) is incorrect.
Reconfirm the SSID and security information (Network Key).
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
TS-05
confirm.
The wireless security information (Authentication method/Encryption method/Network Key) is
incorrect.
Reconfirm the wireless security information (Authentication method/Encryption method/
Network Key) in the table of TS-04.
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
TS-06
confirm.
The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.
If you would like to configure your wireless settings using WPS or AOSS™, you must operate
both your machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
TS-07
If you do not know how to operate your wireless access point/router
using WPS or AOSS™ see the documentation provided with your
wireless access point/router, ask the manufacturer of your wireless
access point/router or ask your network administrator.
Two or more wireless access points that have WPS or AOSS™ enabled are detected.
- Confirm that only one wireless access point/router within range has the WPS or AOSS™
method active and try again.
TS-08
- Try starting again after a few minutes in order to avoid interference from other access
points.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Wireless Network
Windows
Install the drivers and software
®
®
®
®
(Windows XP Home/XP Professional/Windows Vista /Windows 7/Windows 8)
b
c
d
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
Before you install
19
Make sure that your computer is ON and you are
logged on with Administrator rights.
NOTE
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
• The CD-ROM includes Nuance™ PaperPort™
Choose Wireless Network Connection, and
then click Next.
®
12SE. This software supports Windows XP
Home (SP3 or greater), XP Professional (SP3
or greater), XP Professional x64 Edition (SP2
®
or greater), Windows Vista (SP2 or greater),
®
®
Windows 7 and Windows 8. Update to the
®
latest Windows Service Pack before installing
MFL-Pro Suite.
Install MFL-Pro Suite
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
20
a
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
(Recommended), and then click Next.
NOTE
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
®
(For Windows 8: click the
(File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
®
If you are not using the Windows Firewall, see
the instructions provided with your firewall
software for information on how to add the
following network ports.
• If the User Account Control screen appears,
click Allow or Yes.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 137 and 161.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Wireless Network
Windows
e
Choose your machine from the list, and then
click Next.
Finish and restart
21
a
Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
NOTE
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions. If you encounter this
the wireless connection again.
NOTE
• If you are using WEP and the LCD displays
Connectedbut your machine is not found on
the network, make sure you entered the WEP
key correctly. The WEP key is case-sensitive.
• If an error message appears during the
software installation, do one of the following:
®
®
- Windows XP, Windows Vista and
®
Windows 7 users: Run the Installation
f
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
Diagnostics located in
(Start) >
All Programs > Brother > MFC-XXXX LAN
(where XXXX is your model name).
®
- Windows 8 users: To run the Installation
NOTE
Diagnostics, double-click
(Brother
• DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Utilities) on the desktop, and then click the
drop-down list and select your model name
(if not already selected). Click Tools in the
left navigation bar.
• If the Windows Security screen appears, click
the check box and click Install to complete the
installation correctly.
• Depending on your security settings, a
®
Windows Security or antivirus software
window may appear when using the machine
or its software. Please allow or permit the
window to continue.
g
h
If the Environmental Advice for Imaging
Equipment screen appears, click Next.
When the On-Line Registration screen
appears, follow the on-screen instructions.
Click Next.
i
j
If you do not want to set your machine as the
default printer, clear the Set as Default Printer
check box, and then click Next.
When the Setup is Complete window
appears, confirm the settings, and then click
Next.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Wireless Network
Windows
b
The following screens will appear.
To install optional applications:
Now go to
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
Page 33
• When the Brother Product Research and
Support Program screen appears, select
your preference and follow the on-screen
instructions.
NOTE
®
Windows 8 users: If the Brother manuals
included on the CD-ROM are in PDF format, use
®
®
®
Adobe Reader to open them. If Adobe
NOTE
®
Reader is installed on your computer but you
• Internet access is required for the software
update and the Brother Product Research and
Support Program.
®
®
cannot open the files in Adobe Reader , change
the file association for PDF (see How to open a
• When you install MFL-Pro Suite, Brother Help
will also be installed automatically. Brother
Help allows you to access the Brother
Solutions Center when you click
in the task tray.
Install MFL-Pro Suite on
additional computers
22
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
NOTE
Network license (Windows )
®
This product includes a PC license for up to two
users. This license supports the installation of the
MFL-Pro Suite including Nuance™ PaperPort™
12SE on up to two PCs on the network. If you
want to use more than two PCs with Nuance™
PaperPort™ 12SE installed, please purchase the
Brother NL-5 pack which is a multiple PC license
agreement pack for up to five additional users. To
purchase the NL-5 pack, contact your authorized
Brother dealer or contact Brother customer
service.
The installation is now
complete.
Finish
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Network
Macintosh
Install the drivers and software (Mac OS X v10.6.8, 10.7.x, 10.8.x)
e
Choose your machine from the list, and then
click Next.
Before you install
19
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
NOTE
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
Install MFL-Pro Suite
20
a
b
Put the CD-ROM into your CD-ROM drive.
Double-click the Start Here OSX icon to install.
If the model name screen appears, choose
your machine.
f
The installation of the Brother drivers will
automatically start. Please wait for the software
to install.
NOTE
• You can find your machine’s MAC Address
(Ethernet Address) and IP Address by printing
out the Network Configuration Report. See
How to Print the Network Configuration Report
in the Software and Network User’s Guide.
c
d
Choose Wireless Network Connection, and
then click Next.
• If the Setup Network “Scan to” name screen
appears, follow the instructions below.
After the installation, the Brother software will
search for the Brother device. This will take a
few moments to complete.
1) Enter a name for your Macintosh (up to
15 characters long).
The name you enter will appear on the
machine’s LCD when you press SCAN and
choose a scan option. For more information,
see Configure Network Scanning for Macintosh
in the Software and Network User’s Guide.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Network
Macintosh
g
h
When the Add Printer screen appears, click
Add Printer.
Download and install
Presto! PageManager
21
Choose your machine from the list, click Add,
and then click Next.
When Presto! PageManager is installed, OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a
On the Brother Support screen, click the
Presto! PageManager icon to go to the
Presto! PageManager download site, and
follow the on-screen instructions.
NOTE
(OS X v10.8.x)
Select Brother MFC-XXXX CUPS (where XXXX
is your model name) driver from the Use pop-up
menu.
When the support screen appears, follow the
on-screen instructions if you want to download
Presto! PageManager. You can also
download Presto! PageManager later from
the Brother Support screen.
Install MFL-Pro Suite on
additional computers
22
Click Next.
(if needed)
i
When this screen appears, click Close.
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
The installation is now
complete.
Finish
The installation of MFL-Pro Suite is now
complete.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Install Optional Applications
Windows
c
Click the button for the application you want to
install.
Install optional
applications
1
BookScan&Whiteboard Suite supported
by Reallusion, Inc
The BookScan Enhancer software can correct your
scanned book images automatically.
The Whiteboard Enhancer software cleans up and
enhances text and images from photos taken of your
whiteboard.
d
When installation is complete, click the button
for the next application you want to install.
Homepage Print 2* supported by
CORPUS
To exit, click Exit.
Homepage Print 2 is an application that helps you
capture and edit web pages so that you can print out
only the information you need.
* This application supports Microsoft® Internet Explorer®
7.0/8.0 and Firefox® 3.
NOTE
To start BookScan&Whiteboard Suite,
double-click the shortcut icon on your desktop.
To start Homepage Print 2, click
(Start) > All
Programs > Homepage Print 2 > Homepage
Print 2.
NOTE
• The machine must be ON and connected to the
computer.
• Some applications require Internet access.
• Make sure you are logged on with
Administrator rights.
• This application is not available for Windows
®
Server 2003/2008/2012 series.
a
b
Open the top menu again by ejecting and then
reinserting the CD-ROM or by double-clicking
the start.exe program from the root folder. If
the language screen appears, choose your
language.
The CD-ROM Top Menu will appear. Click
Additional Applications.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below:
a
b
c
Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord).
Press Menu.
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Network Reset.
Press OK.
e
f
g
Press 1 to choose Yes.
Press 1 to choose Yes.
The machine will restart, re-connect the cables once this is complete.
Entering Text for Wireless Settings
Most number keys have three or four letters printed on them. The keys for 0, # and l do not have printed letters
because they are used for special characters.
By pressing the correct number key repeatedly, you can access the character you want.
For configuring wireless network settings
Press
Key
One
time
Two
times
Three
times
Four
times
Five
times
Six
times
Seven
times
Eight
times
Nine
times
2
3
4
5
6
7
8
9
a
d
g
j
b
e
h
k
n
q
u
x
c
f
A
D
G
J
B
E
C
F
I
2
3
4
5
6
R
8
Y
a
d
g
j
b
e
h
k
n
7
u
9
i
H
K
l
L
m
p
t
o
r
M
s
N
P
O
Q
V
X
m
S
t
v
y
T
z
U
W
w
Z
Inserting spaces
To enter a space in a name, press c twice.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, and then press Clear. Enter the correct character. You can also back up and insert a character.
Repeating characters
If you need to enter a character that is on the same key as the character before, press c to move the cursor to the
right before you press the key again.
Special characters and symbols
Press l, # or 0 repeatedly until you see the special character or symbol you want.
Press l
Press #
Press 0
for
for
for
(space) ! ” # $ % & ’ ( ) + , - . /
: ; < = > ? @ [ ] ^ _
0 \ { | } ˜
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
How to open a PDF file in Adobe®
Reader® (Windows® 8)
Brother CreativeCenter
a
b
Move your mouse to the lower right corner of
your desktop. When the menu bar appears,
click Settings, and then click Control Panel.
®
Get inspired. If you’re using Windows , double-click
the Brother CreativeCenter icon on your
Click Programs, click Default Programs, and
then click Associate a file type or protocol
with a program.
desktop to access our FREE website with many ideas
and resources for personal and professional use.
Mac users can access Brother CreativeCenter at
c
d
Select .pdf, and then click the Change
program... button.
Click Adobe Reader. The icon next to .pdf
changes to the ‘Adobe Reader’ icon.
®
®
Adobe Reader is now the default application
for reading .pdf files until you change this file
association.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumables
Replacement consumables
When the time comes to replace ink cartridges, a message will be indicated on the LCD. For more information
about the ink cartridges for your machine, visit http://www.brother.com/original/ or contact your local Brother
re-seller.
Ink cartridge
Magenta
Cyan
Yellow
Black
LC101M (Standard)
LC103M (High Yield)
LC101C (Standard)
LC103C (High Yield)
LC101Y (Standard)
LC103Y (High Yield)
LC101BK (Standard)
LC103BK (High Yield)
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name “Innobella™” derives from the words “Innovation” and “Bella” (meaning
“Beautiful” in Italian) and is a representation of the “innovative” technology providing
you with “beautiful” and “long lasting” print results.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a trademark of Brother Industries, Ltd.
Microsoft, Windows, Windows Vista, Windows Server and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, Macintosh, Mac OS and OS X are trademarks of Apple Inc., registered in the United States and other countries.
AirPrint is a trademark of Apple Inc.
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates
in the United States and/or other countries.
AOSS is a trademark of Buffalo Inc.
Wi-Fi and Wi-Fi Protected Access are registered trademarks of the Wi-Fi Alliance.
WPA, WPA2, Wi-Fi Protected Setup and Wi-Fi Protected Setup logo are trademarks of the Wi-Fi Alliance.
Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Firefox is a registered trademark of the Mozilla Foundation.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents and any other
materials are all trademarks or registered trademarks of those respective companies.
Compilation and Publication
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and
specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for
any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other
errors relating to the publication.
Copyright and License
©2013 Brother Industries, Ltd. All rights reserved.
This product includes software developed by the following vendors:
©1983-1998 PACIFIC SOFTWORKS, INC. ALL RIGHTS RESERVED.
©2008 Devicescape Software, Inc. All rights reserved.
This product includes the “KASAGO TCP/IP” software developed by ZUKEN ELMIC,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|