Brinkmann Cell Phone 844 0350 0 User Manual

INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 1  
©2004 The Brinkmann Corporation  
Dallas, Texas 75244 U.S.A  
1-YEAR LIMITED WARRANTY  
For 1-year from date of purchase, The Brinkmann Corporation warrants the Stainless Steel Propane Lantern against defects due  
to workmanship or materials to the original purchaser. The Brinkmann Corporation’s obligations under this warranty are limited  
to the following guidelines:  
This warranty does not cover lanterns that have been altered or damaged due to: normal wear, abuse, improper  
maintenance, improper use, disassembly of parts and/or attempted repair by anyone other than an authorized employee of  
The Brinkmann Corporation.  
This warranty does not cover surface scratching or heat damage to the finish, which is considered normal wear.  
This warranty does not cover mantles or glass globe.  
The Brinkmann Corporation may elect to repair or replace damaged units covered by the terms of this warranty.  
This warranty extends to the original purchaser only and is not transferable or assignable to subsequent purchasers.  
The Brinkmann Corporation requires reasonable proof of purchase. Therefore, we strongly recommend that you retain your sales  
receipt or invoice. To obtain replacement parts for your Stainless Steel Propane Lantern under the terms of this warranty, please  
call Customer Service Department at 1-800-527-0717 for a Return Authorization Number and further instructions. A receipt or  
proof of purchase will be required. Units returned to Brinkmann (without propane cylinder) must include your name, address  
and telephone number. Please make sure product is properly packed, postage prepaid and insured. The Brinkmann Corporation  
will not be responsible for any products forwarded to us without prior authorization.  
EXCEPT AS ABOVE STATED, THE BRINKMANN CORPORATION MAKES NO OTHER EXPRESS WARRANTY.  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION  
TO 1-YEAR FROM THE DATE OF PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.  
ANY LIABILITY FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE FAILURE OF THE STAINLESS  
STEEL PROPANE LANTERN TO COMPLY WITH THIS WARRANTY OR ANY IMPLIED WARRANTY IS EXCLUDED. CUSTOMER  
ACKNOWLEDGES THAT THE PURCHASE PRICE CHARGED IS BASED UPON THE LIMITATIONS CONTAINED IN THE WARRANTY  
SET OUT ABOVE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC  
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
140-0350-0  
04/04, 7/04, 9/04  
Owner’s Manual for Models  
844-0350-0, 844-0350-2, 844-0350-S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 1  
FOR YOUR SAFETY:  
IF YOU SMELL GAS:  
1. DO NOT attempt to light appliance.  
2. Extinguish any open flame.  
3. Disconnect from fuel supply.  
FOR YOUR SAFETY:  
DO NOT store or use gasoline or other liquids with flammable vapors in  
the vicinity of this or any other appliances.  
CARBON MONOXIDE HAZARD  
DANGER  
This appliance can produce carbon  
monoxide which has no odor.  
Using it in an enclosed space can kill you.  
Never use this appliance in an enclosed  
space such as a camper, tent, car or  
home.  
IMPORTANT SAFETY WARNINGS  
WARNING  
FOR OUTDOOR USE ONLY. DO NOT operate indoors (house, tent, garage) or in any unventilated  
or enclosed area.  
• All burning appliances consume oxygen. This lantern uses oxygen from the air and may produce  
CO (Carbon Monoxide), which is a colorless, odorless gas that can kill you. Ample ventilation  
must be provided to avoid endangering your life. Be certain that the area in which this appliance  
is used is properly ventilated at all times.  
DO NOT use as a space heater.  
DO NOT leave lantern unattended when hot or in use. Only adults are to operate this lantern; keep  
children and pets safely away. Carefully monitor all activity around lantern to avoid burns or other  
injuries.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 2  
WARNING  
DO NOT operate lantern within 36" from any combustible material including walls and ceiling.  
DO NOT use on/in apartment complex balconies or patios, recreational vehicles, campers or  
boats.  
• Propane gas is extremely flammable, follow these instructions:  
DO NOT store or use gasoline or other liquids/aerosols with flammable vapors in the vicinity  
of this appliance.  
• Use only 16.4 oz. LP-gas cylinder(s) constructed and marked in accordance with the  
specifications for LP-gas cylinders of the United States Department of Transportation (DOT)  
or Transport Canada, CAN/CSA 339. DO NOT use fuel other than propane.  
• Always attach or detach propane cylinder outdoors away from flame, pilot lights or other  
sources of ignition and only when appliance is cool to touch.  
• Read and follow all warnings and instructions on or accompanying propane cylinder.  
• Always inspect appliance, propane cylinder and propane connections for damage, dirt or  
debris before attaching propane cylinder. DO NOT use if either has been damaged or  
modified.  
• When transporting, not using, or storing lantern always disconnect propane cylinder.  
• Propane cylinder should remain upright to prevent liquid propane flare-up.  
DO NOT connect to a remote gas supply such as natural gas or a refillable propane cylinder.  
• Always use lantern in upright position.  
• Never alter in any way or use with any device or part not approved by The Brinkmann  
Corporation.  
• Avoid touching hot surfaces of lantern.  
• These mantles contain and emit small amounts of naturally radioactive materials whether lit or  
unlit. In view of public concern about exposure to radiation of any type, follow the directions  
below.  
• Avoid carrying mantles close to the body for extended periods.  
• Always light mantle and use lantern outdoors.  
• Avoid breathing vapors or ash from mantle.  
• Keep mantle and ash out of reach of children. Harmful if swallowed.  
• Avoid skin contact with ash and dispose of carefully in garbage.  
• Wash hands after handling mantles or ash.  
• Keep ash away from food.  
• This product contains a chemical known to the state of California to cause cancer.  
• Never use broken or torn mantles.  
• Only use replacement/accessory parts manufactured by The Brinkmann Corporation. Repairs  
should be performed by The Brinkmann Corporation. For parts or repairs contact The  
Brinkmann Corporation’s Customer Service Department at 1-800-527-0717.  
• Properly dispose of all packaging materials.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 3  
ASSEMBLY INSTRUCTIONS  
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS  
CAREFULLY BEFORE ASSEMBLING OR OPERATING  
YOUR LANTERN.  
Inspect contents of the box to ensure all parts are included and undamaged.  
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-527-0717.  
(Proof of purchase will be required.)  
NUT  
LANTERN TOP  
SHIELD ASSEMBLY  
GLASS LENS  
MANTLES  
IGNITER BUTTON  
LANTERN BASE  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 4  
OPERATING INSTRUCTIONS  
Attaching Lantern to Propane Cylinder  
Step 1  
Attach  
Take the lantern outdoors. Turn the valve to the OFF  
position.  
Step 2  
Remove the protective cap from the propane cylinder.  
Save the cap for later storage of the cylinder.  
WARNING: Use only 16.4 oz. LP-gas cylinder  
constructed and marked in accordance  
with the specifications for LP-gas cylinders  
of the United States Department of  
Transportation (DOT) or Transport Canada,  
CAN/CSA 339. DO NOT use fuel other than  
propane.  
Valve  
Detach  
Ignite  
Button  
Step 4  
Attach propane cylinder to lantern by turning propane  
cylinder as shown. HAND TIGHTEN ONLY. Do not  
cross-thread connections.  
Step 6  
Place lantern securely into the lantern base.  
Lantern  
Base  
Installing Mantles in Lantern  
Mantles  
Recessed  
Grooves  
Step 1  
Remove the lantern top by turning the nut counter-  
clockwise. Carefully lift off the shield assembly and  
the glass globe.  
Step 2  
Inspect the mantle for tears or holes and discard if  
damaged. Tie the mantles around the recessed  
grooves on the burners. Be careful that the mantle  
does not tear on the electrode.  
Step 4  
Step 3  
Light the bottom of each mantle evenly from the  
bottom, using a match or lighter. Burn until nothing  
but white ash remains. After the mantles has been  
burned, they are very fragile. Be careful not to touch  
or jar them.  
Distribute the folds on the mantle evenly around the  
burner. Cut the excess string approximately 4” from  
the knot.  
WARNING: Do not operate the lantern with mantles  
that have tears or holes in them.  
Step 5  
Reassemble the lantern.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 5  
WARNING  
DO NOT allow gasoline or other flammable vapors or liquids to come in contact with lantern while  
lighting or at any time during use of lantern.  
• If the lantern burns with a yellow, smoky flame, turn the lantern to the OFF position, wait for it to cool  
and check the air tube and burners for spider webs, dirt and other debris.  
• Do not obstruct the flow of combustion and ventilating air around the lantern.  
Lighting Lantern  
Adjusting Lantern  
Step 1  
Brightness may be adjusted by turning the fuel valve  
or by using the adjustment lever on the shield  
assembly.  
Turn the valve to HIGH and push the ignite button.  
The valve should click and a spark should ignite the  
mantles. If the lantern fails to light, repeat this step.  
If the lantern does not light after several tries, turn  
the valve to OFF and inspect the lantern.  
HIGH / Larger Flame  
Push the ignite button and watch for a spark from  
the electrode. If no spark occurs, check the electrode  
3
16  
gap. The gap should be approximately / ". If  
necessary, remove the lantern top by turning the nut  
counter-clockwise. Carefully lift off the shield  
assembly and the glass globe, bend the flat electrode  
to set the gap.  
If the lantern is wet due to rain or humidity, etc., the  
electrode may fail to spark. If this is the case, hold a  
lighted match near, but not touching, the mantle and  
turn the valve to HIGH. When both mantles are lit,  
reassemble the lantern carefully.  
OFF / Smaller Flame  
Turning Lantern Off  
Turn the fuel valve to the OFF position.  
Storage  
Step 1  
Turn the fuel valve to the OFF position.  
Flat Electrode  
Step 2  
Make certain that the lantern is completely cool.  
Step 3  
Move the lantern away from all sources of ignition,  
including pilot lights.  
Step 4  
Remove the the propane cylinder from the lantern.  
Step 5  
Replace the protective cap onto the propane cylinder.  
Step 6  
It is recommended that the lantern be stored in a  
sealed plastic bag to avoid accumulation of dust,  
cobwebs, etc.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INS_844-0350-2_Lantern.qxd 1/5/05 4:55 PM Page 6  
Shutter Control  
For directional lighting, slide lever over to  
right to close shutter.  
For 360º lighting, slide lever over to  
left to open shutter.  
AFTER-USE SAFETY  
• Always allow the lantern to cool completely before handling.  
• When disconnecting propane cylinder, a small amount of LP gas is released until cylinder is completely  
removed. Cylinder contains a self-sealing valve.  
• Always disconnect the propane cylinder from lantern when not in use - replace plastic cap on the  
propane cylinder.  
• Store propane cylinder in a well ventilated area away from heat source or open flame.  
PROPER CARE & MAINTENANCE  
• Wash glass globe with soapy water occasionally. Do not use abrasive materials.  
• To protect your lantern, the unit must be kept clean and covered at all times when not in use.  
• Only use replacement/accessory parts manufactured by The Brinkmann Corporation. Repairs should be  
performed by The Brinkmann Corporation. For parts or repairs, contact The Brinkmann Corporation’s  
Customer Service Department at 1-800-527-0717.  
• Cover and store lantern in a protected area away from children and pets.  
• After product has been stored and prior to reusing, verify that burners are free from leaves, insects, spider  
webs, dirt, etc. as these items can obstruct the flow of combustion air.  
• Prior to each use, visually check the burner/mantle for proper operation as described on page 5.  
DO NOT use if burner/flame is not operating properly.  
• This lantern requires an unobstructed airflow to operate correctly.  
• During use or storage, always keep the lantern area clear and free of combustible materials, gasoline and  
other flammable vapors and liquids.  
NOTE: Due to the intense heat from burner, it is normal for discoloration to occur on lantern during the first  
few uses.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Box TV Converter Box Compact Media Converter TP BNC 50 ohm User Manual
Blomberg Dishwasher DWS 54100 FBI User Manual
Bloomfield Coffeemaker 8785 AL User Manual
Blue Rhino Outdoor Fireplace WAD506A User Manual
Bodum Coffeemaker ZP2015 000010 User Manual
Briggs Stratton Lawn Mower 1695284 User Manual
Bushnell GPS Receiver 360100 User Manual
Cabletron Systems Network Router BRIM E100 User Manual
Char Broil Gas Grill 463270611 User Manual
Cisco Systems Marine Radio 10 1 User Manual