English
Super hard sole plate
Saphir-jet
Your Braun steam iron has a unique sole plate
made out of a special resistant alloy, polished
with sapphire particles. This process developed
by Braun makes the sole plate extremely durable
and scratch resistant. Even ironing over sharp-
edged fasteners, studs or zippers will not cause
scratches that may snag or damage sensitive
fabric. Thanks to its extra hardness, this sole
plate will maintain its easy gliding properties
throughout the life of the iron.
PV 1502
PV 1505
PV 1510
PV 1512
Type 4685
Type 4315
Type 4684
Type 4687
Steam iron
English
Use Instructions
Guarantee
Service Centers
Download from Www.Somanuals.com. All Manuals Search And Download.
Praktical Guidelines
Type of Water to be Used
Dry ironing
Set the steam regulator 4in position « »
Jet of steam*
Spray / shot of steam
2-function button:
With the models 4684 and
4687 the functions «water
spray» and «shot of
steam» can be activated
with a 2-function button.
The desired function can
be selected by turning the
button 7as far as it will
go. The marking (blue =
water spray or red = shot
of steam) must point to
the respective function (f).
Turn the button from blue
(spray) to red (shot of
steam) anti-clockwise
(coming from the outlets
pat the slim pointed tip)
o): Caution: Keep chil-
dren away from the jet of
steam and do not hold
your fingers in front of the
outlets pwhen activating
•
This iron is designed for tap water. However, if
you have hard water we recommend to use:
– filtered water (household water filters that also
de-mineralize water are commercially
available) or
– a mixture of 1/2 part tap water and 1/2 part
distilled water from drug stores or grocery
stores.
(= steam off) (c) for dry ironing. The water
spray 7may be used at any temperature
setting to dampen the laundry. The jet of steam
6and the shot of steam 7buttons can be
activated during dry ironing, provided that the
temperature selector 1is within the continuous
red area
this function.
Important: Never use distilled water (battery
water). Do not add any additives (e. g. starch) to
the water.
When ironing within the red range
area the jet of steam function 6
Steam ironing
(see «Table of features»)
Temperature selection: Set the temperature
selector 1within the red
range steam (b) and wait
can be used (e). To do so, press the button 6at
intervals of no less than 5 seconds. The jet of
steam has been designed not only for steaming
hard to reach areas like pleats, inside of pockets
etc., but also for steaming hanging clothing (e. g.
velvet skirts, curtains, etc.) (g). The jet of steam
functions between horizontal and upright
positions. Be careful not to touch sensitive
textiles with the hot sole plate.
To fill iron
1. Pull the plug out of the wall outlet.
until the iron has reached the selected
temperature (i. e. the pilot light 8goes off).
Steam ironing is possible in the entire red range.
Steam ironing at lower temperatures may cause
water drops instead of steam. Should this
happen, turn the steam regulator 4to the
2. Put the steam regulator 4in position « »
(= steam off).
•
and from red to blue clockwise (f).
Storage
3. Open sliding shutter 2.
After ironing, always pull the plug out of the wall
outlet. Set the temperature selector 1to «min.»
4. Place the iron in the upright position and fill
with water slowly through the tank opening 2
to the «max.» marking L(a), using the
beaker q.
(b) and the steam regulator 4to « » (= steam
position « » (= steam off) (c).
•
•
Shot of steam* (coming
from the vents in the sole
plate): When ironing
within the red
area the shot of
steam function can be
used. It gives an extra,
particular-ly powerful shot
off) (c).
To empty the iron hold it with the open water tank
opening 2downwards (h) and shake it 1 or 2
times. The swivel cord 9conveniently winds up
around the cord storage k.
Steam regulator 4:
Select the quantity of
steam required (c) for
each garment with the
steam regulator 4.
You can increase the
5. Close sliding shutter.
Selecting the temperature
IMPORTANT: Store the cool steam iron in a dry
place and always standing on its heel rest j.
The sole plate may be damaged by remaining
water if it is stored horizontally. The warranty
does not cover faults or damage resulting from
improper storage of the iron.
Connect the iron to a safely located wall outlet
and select the ironing temperature with the
temperature selector 1(b). As soon as the pilot
light 8goes out, the iron has reached the
temperature selected. To avoid water dripping,
always rest the iron upright while heating it up
quantity by turning the
steam regulator clock-
wise (wide markings) to the end of the red
marking.
of steam penetrating deep into the textiles in
order to straighten creases, collars and pleats.
The function «shot of steam» can be used in
normal ironing and also vertically for steaming
hanging clothing (e. g. velvet skirts, curtains etc.)
(g). Press the shot of steam button 7at intervals
of no less than 5 seconds. When steaming be
careful not to touch sensitive textiles with the hot
sole plate.
keep the steam regulator 4in position « »
(= steam off) (c).
Caution: While ironing do not turn the steam
regulator further, otherwise hot water may
come out from the sole plate (see section
«Decalcifying/Self-cleaning»).
•
Maintenance and Cleaning
To remove residues of minerals/starch from the
sole plate always use steel wool. Never use a
scouring pad, vinegar or other chemicals. The
steam vents mand jet of steam outlets pmay
be cleaned manually with a toothpick, if
necessary. Clean the sole plate regularly if you
use starch or other aids on the clothes for
ironing.
You will usually find the following symbols in your
garments:
By turning the steam regulator anti-clockwise
you can reduce the quantity of steam or turn the
* If pressed too frequently, it can drip. Should this
happen, wait a few seconds before using it
again.
steam off « » (= steam off) (see «Ironing
•
Guide»).
The temperature selector 1is marked with
these symbols:
Spray (coming from the
nozzle 3): The spray
function can be used at
any temperature, to
dampen laundry. To do
so, press the button 7
(water spray = blue).
Constant steam: Your Braun steam iron is
equipped with a special tank configuration to
provide constant steam even when the water
level in the tank is low.
Decalcifying / Self-cleaning
Braun irons Saphir-jet have a built-in system
(anti-calc. valve) to prevent calcification. It allows
you to clean residues from the steam chamber.
Do not use commercial decalcifiers; they may
damage the sole plate. We recommend to use
the self-cleaning function every 3 months.
min. The iron is connected
●
Synthetics (acrylic, acetate)
●● Silk/rayon/nylon/polyester/
cotton blends/wool
«Extra steam»*
(coming from the
steam vents in the sole
●●● Cotton/linen
max. Linen
plate): For stubborn
creases and wrinkles,
collars and cuffs.
Select the temperature you need according to
these symbols.
When ironing within
the red range
area the extra steam function can
be used. You can press the button 5(d) for 3
seconds at intervals of no less than 7 seconds.
Spray, shot of steam, jet of steam
Before you start ironing, we recommend to press
the buttons 3 or 4 times, in order to activate
these functions.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn the steam regulator 4to the position « »
Cleaning the anti-calc. valve on the steam
regulator
During the time the sole plate is cooling down we
recommend to decalcify the anti-calc. valve in
the following way:
1. Put a small quantity of white vinegar (not
vinegar essence) or lemon juice into a glass or
bowl.
Ironing Guide
Guarantee
We grant a 1 year guarantee on the product
commencing on the date of purchase.
•
(= steam off).
To begin ironing, it is best to start with fabrics
requiring a lower temperature (e. g. synthetics),
and continue with those requiring a higher
temperature (e. g. cotton, linen).
Silk and silk-like synthetics tend to waterspot,
therefore before using the water spray feature,
test it on an inconspicuous spot first.
2. Fill the water tank to the marking «max.» L
and turn the temperature selector 1to the
●●● marking («self-cleaning» = SC) (A).
Within the guarantee period we will eliminate,
free of charge, any defects in the appliance
resulting from faults in material or workmanship
either by repairing, or exchanging parts or
exchanging the whole appliance as we may
choose.
3. Plug the iron into the socket and wait till the
pilot light 8goes off.
2. Immerse just the bot-
tom part of the valve in
the liquid, wait till it is
decalcified and care-
fully brush of remain-
ing residue (E).
Fabrics
Temperature
regulator
setting
Steam
regulator
setting
4. Unplug the iron and hold it over a sink.
Not covered by this guarantee: damage arising
from improper use or storage (operation with
incorrect current/voltage, plugging it into an
unsuitabie power point, breakage use of
commercial decalcifyers, wet storage on the
ironing surface), normal wear and defects which
have a negligible effect on the value or operation
of the appliance.
5. Turn the steam regu-
lator 4clockwise to
the end of the red
Synhetics
(acrylic, acetate)
●
(= steam off)
•
marking (B) and then
Do not use a metal
brush.
Silk, rayon,
nylon, polyester,
cotton blends
●●
(= steam off)
to max.
•
6. keep turning it to the
double-arrow marking
. The steam regu-
lator will lift (C).
3. Then, rinse it under
running water without touching the lower end
of the valve.
Wool
●●
(= steam off)
to max.
•
The guarantee becomes void if repairs are
undertaken by unauthorised persons and if
original Braun parts are not used.
Cotton
Linen
●●●
(= steam off)
to max.
•
7. Pull out the steam
regulator together with
the valve vertically (D).
Do not touch the lower
end of the anti-calc.
valve with your fingers,
to avoid a possible
greasy film.
Re-inserting the steam regulator with anti-calc.
valve
1. Re-insert the steam regulator so that the
The guarantee only comes into force if the date
of purchase is confirmed by the dealer's stamp
and signature on the guarantee card and
registration card.
●●●
to max.
(= steam off)
to max.
•
double-arrow
the iron (F).
aligns with the marking on
Mixed fabrics: Always select the temperature
suited for the most sensitive fibre the garment
contains. Follow manufacturer’s instructions on
the label.
This guarantee extends to every country where
this appliance is supplied by Braun or its
appointed distributor and where no import
restrictions or other legal regulations hinder or
prevent service being given under guarantee.
2. Then push it down carefully and at the same
time turn the button anti-clockwise.
8. Allow all water to drain through the steam
vents in the sole plate, while shaking the iron
slightly. (Caution: Hot water and steam come
out from the sole plate.)
3. Keep turning the button
to the marking « »
•
(= steam off).
Subject to chance without notice.
Service under the guarantee does not affect the
expiry date of the guarantee. The guarantee on
parts or entire appliances which are exchanged
ends when the guarantee on this appliance
expires.
4. If your iron has the shot
of steam, refill the tank
with water, heat the
iron up and press the
button 73 to 4 times in
the shot of steam
9. Wait for the sole plate to cool down and then
clean it (see «Maintenance and Cleaning»).
This product conforms to the
EMC-Requirements as laid down by
the Council Directive 89/336/EEC.
10.Make sure that the sole plate is completely dry
before storing it.
In the event of a claim under this guarantee,
hand in the complete appliance with the valid
guarantee card to your dealer, or send both to
the nearest Braun Customer Service Centre.
function before ironing, to rinse the iron.
ATTENTION: The iron must not be used without
the steam regulator and the anti-calc. valve.
All other claims including for damages resulting
from this guarantee are excluded unless our
liability is legally mandatory.
Those claims arising out of the sales contract
with the vendor are not affected by this
guarantee.
For UK only:
This guarantee in no way affects your rights
under statutory law.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|