"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"
Residential Upright
Energy Saver Gas Water Heater
®
The Atmospheric Vent FVIR Defender Safety System Models Feature
(Except M-I-75S and M-I-100T):
®
I Advanced ScreenLok Technology Flame Arrestor Design—Flame
arrestor is designed to prevent ignition of flammable vapor outside of the
water heater.
I Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
I Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
I Pedestal Base—Rugged and durable base allows easy transport and
positioning, while providing corrosion resistant contact with floor.
I Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
I Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
All Upright Models Feature:
I Factory Installed Hydrojet Total Performance System—Cold water inlet
®
sediment reducing device helps prevent sediment build up in tank and
increases first hour delivery of hot water. (100 gallon models come equipped
with the Hydrojet® Sediment Reduction System).
®
I Vitraglas Lining—Bradford White water heater tanks are protected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating
that provides a tough interior surface for our hot water tanks.
I Fully Automatic Controls—Automatic temperature selection at your
fingertips. Built-in energy cut-off switch prevents abnormally high water
temperature for extra safety. Built-in gas pressure regulation.
I Side Connections—M-I-75S and M-I-100T have 3/4" NPT tappings that
allow easy connections for space heating applications (potable water only).
I 1" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy
by retarding loss of heat (M-I-75 has 11⁄4" and M-I-100T has 2").
I Water Connections—3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation (M-I-75S has 1" NPT and
M-I-100T has 11⁄4" NPT factory installed dielectric waterway fittings).
I Factory Installed Heat Traps—Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation
(Except M-I-75S & M-I-100T).
I Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
I 3x4 “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections
with inputs of 40,000 BTU/Hr or less. Over 40,000 BTU/Hr. has the 4" “Snap
Lock” Draft Diverter.
Photo is of
M-I-5036FBN
I Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
I Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
I T&P Relief Valve—Included.
I Brass Drain Valve.
I Design Certified by CSA International (formerly AGA and CGA).
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction StudySM
.
Study based on 882 responses measuring 3 water heater/boiler manufacturers and measures opinions of subcontractors. Proprietary study results are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
experiences may vary. Visit jdpower.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Defender Safety System®, ScreenLok®, Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.
101-B-0108-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|