Solid Series
Loudspeaker system
Solid Solutions C100
ꢀ
The solid solutions C100 is a centre channel specifically designed to focus dialogue the
viewing screen. It should ideally be positioned above or below the television and its
magnetic shielding ensures a television picture free from interference.
PB100
ꢀ
The solid solutions PB100 compact active subwoofer has an integral 70-watt MOSFET
amplifier, dramatically boosting the bass response of your hi-fi or Home Theatre system. It
features B&W ’s unequalled down-firing Flow Port System, delivering low frequencies fat and
with a punch that is second to none.
S100
ꢀ
The solid S100 is the perfect match for a modern lifestyle and can be used in any room of
the house. Its multipurpose wall bracket allows it t be mounted either way up in the corner or
flat on walls.
Centrale
ꢀ
The Solid Centrale is the new high-end benchmark amongst compact multi-purpose monitors.
Ideal as front centre, rear or front channel monitor in Surround Sound systems whilst offering
breathtaking definition and clarity as a shelf seized high-end hi-fi monitor. The Solid Central is
at home in-doors or out, upright or on its side, wall mounted or stand-based, at most angles
on substantial surfaces. The Central enables top quality hi-fi performance to travel further than
ever before.
ꢀ
Both drivers are magnetically shielded to facilitate proximity to videos, TV sets and computer
screens without causing any picture distortion.
Team
ꢀ
Team has been specifically designed to adapt to any environment, any application. On its
own it can be used as a highly efficient, sensitive bookshelf speaker, professional equipment
monitor or used with the aid of the unique Solid port bug-plug in outdoors applications.
ꢀ
W ith its magnetically shielded design it is ideal for use as a TV surround loudspeaker. Its
integral wall mounting brackets means it can be suspended from walls or ceiling in any room
in the house.
ꢀ
W hilst the Team delivers as good, if not better bass extension than other loudspeakers twice
its size, it’s when the Team links up with the Teambass Subwoofer that it really shows its
power. W ith a special front vent design to accentuate the low frequencies, teams peak
power handling in its own right is impressive at around 75 watts, but with the Teambass this
is boosted to in excess of 100 watts.
Download from Www.Somanuals.com. All Manuals Search And Download.
HCM1
ꢀ
The Solid HCM1 loudspeaker is possibly the most advanced, high fidelity compact monitor
on the market today – a professional audiophile product with reference speaker sound
capabilities. Although borrowing characteristics from classic Solid Monitor, the HCM1 has
been extensively refined. Making good use of multi-radiused toughened copolymer cabinet, it
offers low coloration with superb dynamic range and sensitivity, minimal distortion at high
volumes and excellent stereo imaging.
ꢀ
The HCM1 can operate with or without a subwoofer. The HCM1’s well-defined high
frequency output is produced by a one inch, Ferro-fluid cooled soft dome polyester tweeter.
ꢀ
The bass midrange incorporates a high quality copolymer five-inch woofer, which offers a
unique combination of stiffness and damping, while the low hysteretic roll surround gives a
fast bass attack. The HTM1 is magnetically shielded and features acoustic voice matching,
ensuring accurate, seamless sound from a two to six channel set-up.
HCM 2
ꢀ
The Solid HCM2 is an excellent full range speaker in a super-compact format. Ideal as a
front or rear surround speaker in a start-up home theatre, it may also be used in combination
with a subwoofer as part of a three-piece sound system. Smaller than the HCM1, the HCM2
uses a similar multi-radiused cabinet to reduce internal resonance and produce full quality
sound. Its 75-watt power handling capability and 80Hz to 20kHz response (±3dB) makes it
fully up the demands of digitally recorded music and home theatre sound tracks. Magnetically
shielded and equipped with acoustic voice matching to ensure a seamless tonal balance with
other Solid speakers, the HCM2 features a one inch Ferro-fluid cooled tweeter: a four inch
bass/ mid range driver: an automatic switch-off to protect against accidental overload and a
versatile wall fixing bracket.
Active Power Bass
ꢀ
The Active PowerBass is a powerful extension to the Solid HCM1, HCM2 and Monitor
loudspeakers. Housed in a cube-shaped cabinet, it is ideal for both critical music listening
and high performance home theatre applications, giving an exceptionally smooth bass
response right down to 38Hz. The active PowerBass utilises a high 70-watt MOSFET
amplifier, normally found only in esoteric, top of the range loudspeakers: an eight inch
subwoofer cone with a long throw voice coil and rubber surround for a fast bass attack:
magnetic shielding to allow the Active PowerBass to be placed near a television or computer
and a set-up switch, able to be pushed flush once the subwoofer has been adjusted.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
w w w .b w sp e a k e rs.co m
Download from Www.Somanuals.com. All Manuals Search And Download.
|