10 R - 02 1011
4
Download from Www.Somanuals.com. All Manuals Search And Download.
This radio is equipped with the most advanced "TOUCH SENSE PANEL", so that it is easy and
convenient to use while driving.
Here are some tips to show you how easy it is to use this touch sense panel:
Tips
Using a very light touch on the radio panel will activate that feature. You will not need to
"PRESS"hardonthepaneltomakethisradiochangefeatures.
The power button along with some of the buttons that have dual functions, will need to be
"TOUCHED"from2to3secondstomakethechange.
The best area to "TOUCH" on the panel to make it activate is the illuminated or lighted area. For
example, just touch for 2 to 3 seconds the illuminated power symbol and the unit will turn on or
off.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS
When Driving
Keep the volume level Iow enough to aware of
theroadandtrafficconditions.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION
In some countries, it's unlawful to operate a
vehicle while video is displayed in the
driver's viewing area. Please always switch
the unit's display to "Font Type Display"
mode by pressing the DISP button while
driving.
DO NOT OPEN COVERS AND DO NOT
REPAIR BY YOURSELF PLEASE REFER
S E R V I C I N G T O
TECHNICIAN.
A
Q U A L I F I E D
NOTE:
1. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
2. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDEDACCESSORIES.
For safety reason, the driver should only
enjoy / watch the video while the car is in
parkingmode.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause electrical
shorts, fireorotherdamage.
CAUTION
3. THIS DEVICE IS INTENDED FOR
CONTINUOUSOPERATION.
In order to avoid any accident, the driver
must not watch video while driving. This unit
is designed to not allow watching moving
video while driving. Park your car in a safe
place and engage the ‘PARKING BRAKE
WIRE'beforewatchingmovingvideo.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. Patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
usesonlyunless
When Parked
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give the
interior a chance to cool down before starting
playback.
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassemblyisprohibited.
Use the Proper Power Supply
This product is designed to operate with a 12
volt DC, negative ground battery system (the
regularsysteminaNorthAmericancar).
Protect the Disc Mechanism
Avoid inserting any foreign objects into the slot
of this player. Failure to follow this may cause
malfunction or permanent damage due to the
precisemechanismofthisunit.
CAUTION
THIS MOBILE MultiMedia PLAYER IS A
CLASS I LASER PRODUCT. THIS UNIT USES
A VISIBLE/INVISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION IF
EXPOSED DIRECTLY. BE SURE TO
OPERATE THE MOBILE MultiMedia PLAYER
CORRECTLYASINSTRUCTED.
E - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC AND FORMAT SUPPORTS
This unit can play various video/audio format
which stored into Disc/USB or SD card on
MediaPlayer.
Unsupported Discs
8 cm Disc
CDV, CDI, CDG,
LD
MultiMedia RAM
The following chart helps you to check if a
disc is supported by this unit, as well as what
functions are available for a given disc type.
Note on Region Code
Disc format
ꢀ
MultiMedia players and
Have their own
ꢀ
MultiMedia Video discs
Region Code numbers.
This unit
regioncode numbers.
Digital Versatile Discs (MultiMedias)
Can play
the disc of all
ALL
Video CDs (VCDs)
Disc Maintenance
DigitalVersatileDiscsRecordable
(MultiMedia+/-R)
Before playing, wipe the disc using a clean
cloth, working from the center hole towards the
outsideedge.
DigitalVersatileDiscsRewritable
(MultiMedia+/-RW)
Never use benzene, thinners, cleaning fluids or
any othersolvent.
anti-staticliquids or
Compact Discs (CDs)
CD Recordable (CD-R)
CD Rewritable (CD-RW)
NOTE
A disc may become somewhat scratched
(although not enough to make it unusable)
depending on you handle it and conditions
in the usage environment. Note these
scratches are not an indication of any
problem with the player.
Audio Format
Playback CD-DA and MP3 or WMA digital
ROM or
music file on CD-ROM or MultiMedia-
USB or
Memory Card.
Note of MP3 and WMA:
Label side
Up
Support Maximum 2000 files
Maximum 30 characters display
Supported Sampling frequencies; 32kHz,
44.1kHz, 48kHz.
Supported Bit-Rates: 64-256 kbps variable bit
rate
Do not bend
Video Format
Playback IMAGE JPEG, MultiMedia Video, MPEG4 .
On CD-ROM or MultiMedia-ROM or USB or SD.card
Wipe the disc surface
from the
center to the edge.
Never touch
the under side
of a disc
Noted of MPEG4
Supported decoding MPEG-4 video defined by
ISO14496-2 Standard:
1. Simple Profile(SP) and
2. Advance SimpleProfile (ASP)
Supported file format: MP4 and .M4a (audio
only)
E - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your customer car audio dealer or a company
suppling kits.
Ifyouarenotsurehowtoinstallthisunitcorrectly, haveitinstalledbyaqualifiedtechnician.
To attach the front panel back to the unit
chassis, firstly join the right guide block
hole to the right cylinder (Step ), then
3
Trim Plate
1
join the left guide block hole and the left
cylinder
(Step ).
2
Step
2
Step
1
18
2m
m
5
3
m
1
m
Disassembly
tool
2
Screw
Sleeve
2
Dashboard
3
4
Bend the appropriate tabs
to hold the sleeve firmly
in place.
Trim
Plate
Sleeve
When you stand the unit, be careful
not to damage the fuse on the rear.
Control
Panel
Removing the unit
Beforeremovingtheunit, releasetherearsection.
2
1
3
Step
2
Step
1
Disassembly
tools
Release
To remove the front panel:
1. Press the Panel Release Button.
.
Trim Plate
Insert the two disassembly tools, then pull
them as illuatrated so that the unit can be
removed.
2. After flipping down the front panel, push rightwards
Step
1
(
), then draw the left of the (Step 2 ).
When installing the unit without
using the sleeve
When using the optional stay
Stay(option)
Screw
Washer
Nut
Dashboard
Screw(4x12mm)
Screw
Sleeve
Screw
Bracket
Install the unit at an angle
of less than 30°.
Installation using the screw holes on the sides of the unit.
Fastening the unit to the factory radio mounting bracket.
30°
E - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE SYSTEM
About The Reverse Wire For
Back Up Camera System
About Parking Wire
CAUTION
If user connected a back up camera system
to this unit, when the vehicle is in reverse
Gear (Back Up mode), the front in-dash TFT
display will automatically switch to Back Up
Camera Video signal regardless whatever
mode is currently displayed on the front in-
dash TFT.
In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching moving video
while driving. Park your car in a safe place and
engage the parking brake before watching
movingvideo.
Tips
NOTE
The Video Blocking system under Parking
Brake NOT ENGAGED only control this
unit's display, This system will not affect the
Video Output thru the rear RCA Video
Output.
Be sure to connect Reverse wire properly.
(please see more details on “ Wiring
Diagram.”)
TIPS
Be sure to connect Parking Brake connection
lead. ( please see more details on “ Wiring
Diagram.”)
NOTE
If watch moving video from Disc or AV In
source but Parking Brake is NOT
PROPERLY CONNECTED, the video signal
will be blocked by the system.
E - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE SYSTEM
Wiring Diagram
ANTENNA
EXTENDER
CABLE
ANTENNA
JACK
BLACK
L
FRONT LINE OUT
BLACK
RCA-TO-RCA CABLE
(not supplied)
WHITE
RED
R
REAR
SUB-W OUT
AMP
BACK UP CAMERA IN
OR VIDEO IN
VIDEO IN
YELLOW
RED
ISO CONNECTO
SOCKET
(See Figure 1)
VCRorMultiMedia
or
AUDIO IN (RIGHT)
AUDIO IN
R
GAMECONSOLE
AUDIO IN (LEFT)
AUDIO IN
WHITE
L
ISO MALE CONNECTOR
VIDEO OUT
VIDEO OUT
YELLOW
Brake
Switch
PINK
PARKING
BRAKE (
Connect to Parking Brake.
)
2.5m extension wire
Ground
ORANGE
Reverse gear signal
REVERSE(+)
OVERRIDE
WIRE
CONNECTOR
B
Connect to Back Lamp Lead +
P
Gearbox
Switch
R
N
D
2
1
2
3
4
5
6
7
8
L
1
2
3
4
5
6
7
8
CONNECTOR
Figure 1
A
ISO CONNECTOR 4PIN+8PIN
FEMALE WITH MALE TERMINAL
ISO CONNECTOR WIRING CHART
PIN
A4
WIRE COLOR
FUNCTION/LABEL
YELLOW
BATTERY(+)
A5
POWER ANTENNA
IGNITION(ACC)
GROUND
BLUE
RED
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
BLACK
VIOLET
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT FRONT SPEAKER (-)
LEFT FRONT SPEAKER (+)
LEFT FRONT SPEAKER (-)
LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
VIOLET/BLACK
GREY
GREY/BLACK
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
E - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
THE FUNCTIONS OF MAIN UNIT
AV IN
F
L m
d
s
DISC
SLOT
RESET
SLOT
Decriptions
No.
Item
RELEASE
Press this button to open the control panel.
Short press this button to access into the Audio Menu mode.
AUDIO MENU
POWER
Press this button or any other button on the front panel
(except Release button) to turn the unit on. Hold & press this
button again to turn the unit off.
ENCODER
VOLUME KNOB
Rotate the Encoder Volume Knob to increase and decrease the
volume. ( The Maximum volume level is “46”.)
Under Tuner mode, short press this button to change between
BAND FM1, FM2, FM3, AM1(MW1) ( or AM2 ( MW2 ) if available).
BAND
Under Media playback mode, short press this button to Pause/
Resume Play the music.
(PLAY/PAUSE)
FUNC
(FUNCTION)
Press this button to enter into the Function mode.
F
XBS
Hold & press this button to turn On/Off the Bass booster function.
E - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
THE FUNCTIONS OF MAIN UNIT
DISP
(DISPLAY)
Under Media playback mode, short press this button to switch
between OSD display or Video display mode.
d
MUTE
LIST
Short press this button to turn the Mute On/Off.
Under tuner mode,press this button to Show The List of stored
station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
Under the MultiMedia/MP4 mode, press this button to list the
searching of MultiMedia Root Menu or Files on the playback mode.
L
Under the VCD mode, press this button to turn On/Off the
PCB function.
EQ
Hold & press this button to select the preset Equalizer setting:
OFF -> ROCK -> POP -> JAZZ -> TECHNO -> CLASSIC
TUNE UP/DOWN
FILE UP/DOWN
Under tuner mode, press and hold this button momentarily to
enter into the Auto Seek/ Manual Seek mode.
Under media playback mode, press these buttons to skip a
chapter / track / scene / file.
&
FAST BACKWARD
/ FORWARD
Under media playback mode, press and hold momentarily to
fast forward / backward the Disc.
SOURCE
Press this button to select different source playback mode:
TUNER / DISC / USB / SD / AV IN MODE
s
(ESC)
DIM
Press this button to quick return previous menu or mode.
Hold & press this button to adjust the TFT dimmer High or
Low.
MENU
(SYSTEM MENU)
Press this button to access into the System Menu mode.
Press this button to eject the Disc.
m
EJECT
DISC
SLOT
Insert the disc into CD slot.The CD will begin to play.
DISC SLOT
RESET
User can reset the unit to its default setting. Press this button
by using a ball-point pen or sharp object.
RESET
SLOT
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the SD Card.
SD CARD
SLOT
USB SLOT
( The USB slot behind the
USB/AV-IN jack door.)
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the USB memory stick.
AV-IN JACK
(The AV-IN slot behind
the USB/AV-IN jack door.)
This unit is allowed to connect with external Audio/Video
system such like Digital Camera or Game Console. User
can connect the external A/V system thru the A/V in jack on
front panel.
AV IN
E - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
THE FUNCTIONS OF REMOTE CONTROL
10
2
8
4
13
14
12
1
9
5
11
6
17
15
19
3
18
20
21
16
24
25
26
22
7
23
Decriptions
No. Button Item
POWER ON
OFF
Press this button to turn On / Off the unit.
1
2
Press this button to turn the Mute On / Off.
MUTE
AUDIO MENU
Press this button to enter into the Audio Menu mode.
AUDIO
3
SYSTEM MENU Hold & press this button to enter into the System Menu mode.
SOURCE
Press this button to enter into the SOURCE mode.
Press this button to increase the volume.
Press this button to decrease the volume.
4
5
6
7
VOLUME +
VOLUME -
EQ
Press this button to enter into the preset Equalizer setting
mode.
E Q
Under the tuner mode, press this button to access the
Manual Seek mode.
Under the media playback mode, press this button fast
forward through the music under media player mode.
8
Under the tuner mode, press this button to access the
Manual Seek mode.
Under the media playback mode, press this button fast
backward through the music under media player mode.
9
UP/DOWN
LEFT/RIGHT
Use these buttons to move cursor up/down/left/right.
10
E - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
THE FUNCTIONS OF REMOTE CONTROL
Under the tuner mode, press this button access Auto Seek mode.
Under the media playback mode, press this button to skip
backward of the previous chapter.
11
12
Under the tuner mode, press this button access Auto Seek mode.
Under the media playback mode, press this button to skip
forward of the next chapter.
ENTER/OK
PLAY/PAUSE
BAND
13
14
15
Use this button to confirm the selection.
Press this button to Pause / Resume Play the music under
media playback mode.
Press this button to return previous menu. Under the tuner
mode, press this button to change the radio Band.
BAND
When in media playback mode use this button for track or
file number direct access and use when function need
numeric selection or input.
NUMERIC
BUTTONS
16
OSD
DISPLAY
Press OSD button and the information displayed on the TFT
may vary according to this disc or files type.
17
18
D
F
FUNCTION
Press this button to enter into the function mode.
Under tuner mode,press this button to Show The List of
stored station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
19
L
LIST
Under the MultiMedia/MP4 mode, press this button to list the
searching of MultiMedia Root Menu or Files on the playback mode.
Under the VCD mode, press this button to turn On/Off thePCB
function.
Under the MP3/WMA mode, press this button to direct
playback time.
GOTO
ZOOM
GOTO
ZOOM
20
21
Under the MultiMedia mode, press this button to direct Title/Chapter
/ Time selection.
When playback the MultiMedia, press this button repeatedly to
increase the magnification level.
Under MultiMedia mode, press this button while playing a scene
recorded with multiple angles to change the angle.
ANGLE
22
23
24
25
26
ANGLE
DIMMER
DIMMER
DISC AUDIO
SUBTITLE
TITLE
PressthisbuttontoadjusttheTFTdimmerHighorLow.
UnderMultiMediamode,pressthisbuttonduringplaybacktochange
theaudiolanguage,ifavailableonthedisc.
DISC
AUDIO
Under MultiMedia mode, press this button during playback to turn
on/off subtitles and change the subtitles.
SUB
TITLE
TITLE
UnderMultiMediamode, pressthisbuttontobringuptheTitleMenu.
E - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST AUDIO SETTINGS
Press
Button to access the Audio Menu.
FADER
User has 5 seconds to use the
to adjust
ThebelowAudioSettingcanbeselect:
the Fader between the front and rear speakers
from R12 (full rear) to F12(full front).“C00”
represents an equal balance between the front
andrearspeakers.
BASS (Bass Level)
User has 5 seconds to use the
to adjust
thedesiredBass levelrangefrom-6 to+6.
TREBLE (Treble Level)
SUB-W (Subwoofer)
User has 5 seconds to use the
to adjust
Turn the
to selec the Subwoofer function
thedesiredTreblelevelrangefrom-6 to+6.
ON/OFF.
BALANCE
User has 5 seconds to use the
to adjust
the Balance between the right and left
speakers from R12 (full right) to L12 (full left).
“C00” represents an equal balance between
therightandleftspeakers.
E -
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST SYSTEM MENU SETTINGS
[
]
MENUm(System Menu)
m
VOLUME PGM (Programmable
Turn-on Volume)
This option allows the adjustment of the volume
Hold & press the
Button to get into the
System Menu. User can use
navigate thru the menu setting & rotate
adjustthesetting.
to
to
level of the radio will automatically assume
when turning on. To program a specific turn on
volume level, use the
to select “VOLUME
LEVEL” levelfrom00to46.
DIMMER
Turn the
to adjust the TFT Backlight level
TIME SET (CLK)
The time on the clock will be set to 12:00 as the
betweenHighorLow.
BACK COLOR (Background)
This option allows the user to select the nine
default. Program the current time by rotating
the
clockwise to adjust the minutes and
colors for the Background of the TFT screen.
counterclockwisetoadjustthehours.
User can turn the
belowcolors:
WHITE / BLACK / GRAY / BLUE / CYAN /
YELLOW/RED/PURPLE/GREEN
to select from the
TIME FORMAT
“ 12H ” is the default setting. User can use
the
to choose the Time Format between
“12Hours”&“24Hours”
TITLE COLOR
This option allows the user to select the seven
DATE SET
OnceinDateSetmode, Usercanusethe
to adjust the Date / Month / Year. Short press
colors for the Title of the TFT screen. User can
turn the
colors:
to select from the below
the AUDIO button to confirm the entry and
movetothenextentry.
RED / PURPLE / GREEN / GRAY / BLUE / CYAN
/YELLOW
INFO (Software Information)
FONT COLOR
This option allows the user to select the 8 This is for displayed the software information of
colors of the fonts of the TFT screen. User thisunit.
can use the
colors:
to select the below
RED / BLUE / GRAY / CYAN / WHITE / YELLOW /
PURPLE/GREEN
BEEP TONE
The beep tone feature allows the selection of
an audible beep tone to be heard each time a
button is pressed on the face of the radio.
"BEEP TONE ON" is the default display. Rotate
the
to select the “BEEP TONE OFF”
option.
E -
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER OPERATIONS
[
]
FUNCTION BUTTON
F
BAND BUTTON
f
belowfunctionsareavailableforTunermode:
Press the BAND button to change between FM
bandsandorAM(MW) bands.
Press the
Button under Tuner mode, the
[
]
LIST BUTTON
Button to get into the Preseted
L
MANUAL
STORE
Use this funtion to saved the
current frequency to memory
station.
Press
L
stations list, and user can use the
select which preseted station he would listen
to
AUTO
After Auto Stored & saved the 6
strongest stations, the unit will
automatically enter present scan
one time.
STORE
to, and press
selection.
button to confirm the
LOCAL
SEEK
This feature is used to designate
the strength of the signals at which
the radio will stop during automatic
tuning. "Distance" is the default,
allowing the radio to stop at a
broader range of signals. To set the
unit to select only strong local
stations during automatic tuning,
press the volume control to select
the local ON/OFF.
[ ]
TUNING UP/DOWN
[ ]
BUTTON
1. Long press these buttons to access into the
ManualSeekmode.
2. Press these buttons to access into the Auto
Seek mode, and the unit will auto search for
thenextradiostation.
AF
ON/OFF
To change AF in ON or OFF mode.
To change TA in ON or OFF mode.
TA
ON/OFF
PTY
You can get into the PTY list to
select the desired PTY mode.
TUNER
AREA
This option allows the selection of
the frequency spacing which is
most appropriate for the area this
unit isused in, U.S.A, EUROPE
NOTE
AF, TA & PTY only appearing in the
function list, after changed the Tuner Area
to “ Europe”.
E -
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT RDS
AF (Alternate Frequencies)
NOTE
If the radio signal comming from the current
station is poor, you can turn on the AF
(Alternate Frequency) function to let the unit
search for another station with stronger signal,
but with the same program identification as the
currentstationautomatically.
This unit default at USA Tuner Area. RDS
function only activated after selected the
Tuner Area to “ Europe”.
TIPS
Please refer Tuner operation “ FUNCTION”
for details how to select the Tuner Area.
TA (Receive Traffic
Announcement )
The RDS ( Radio Data System ) function
operate only in areas with FM stations
broadcasting RDS signals. If you tune to an
RDS station, an RDS icon, presenter, and
station/programinformationisdisplayed.
If you do not want to miss traffic announcement
during enjoying music, you can turn on the TA
(TrafficAnnouncement)function.
TA On When there is traffic announcement,
the unit switches to the tuner mode
(regardless of the current mode) and
begins to broadcast the announcemet
on traffic conditions. When the traffic
announcement is over, it returns to the
previous mode.
ThisunitsupportbelowRDSfeatures:
PTY (Program Type)
Before tuning to RDS stations, you can select
program type and let the unit search only for
programsoftheselectedcategory.
TA Off Traffic announcement does not cut in.
MUSIC GROUP
SPEECH GROUP
CT (Clock Time)
POP M , ROCK M
NEWS, AFFAIRS, INFO
The RDS signal broadcast together with the
clocktimetotheunitautomatically.
EASY M, LIGHT M
CLASSICS, OTHER M
SPORT, EDUCATE, DRAMA
CULTURE, SCIENCE, VARIED
JAZZ, COUNTRY
WEATHER,FINANCE, CHILDREN
SOCIAL, RELIGION, PHONE IN
TRAVEL, LEISURE, DOCUMENT
NATION M, OLDIES
FOLK M, TEST, ALARM
E - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card)
Album Up
General Operation
Under List Search mode, press Track Up/Down
asfolderup/downontheunit.
[
]
SOURCE BUTTON
S
Press
button to select DISC, USB, SD
s
00:00:16
/...F1 064KBPS/T01 MENUETTO.WMA
01/22
..
CARD. The unit will automatically start
playback.
Filter
T01 MENUETTO
Repeat : Off
T02_1KHZ_SINE_W
T03 17HZ SINE W
T04_127HZ_SINE_
T05 997HZ SINE
T06_10007HZ _ SIN
T07 19997HZ SIN
Mode
: Normal
[
]
PLAY/PAUSE BUTTON
Press
button to pause the music. Press
Music Playing
thisbuttonagaintoresume play.
Title: T01 MENUETTO
[
]
FUNCTION BUTTON
Under the Function menu, user can have the
belowoptionsforselection:
f
[
]
DISPLAY BUTTON
D
This DISPLAY interchange button can be used
to interchange between the two types of
DISPLAY INTERFACE, the 'OSD Display
Interface” & 'Media Playback Display interface'.
This is useful when playing a CD or MP3 or
WMA or other music disc and if the user prefers
to see the CD Track No/MP3 File number and
elapse time with bigger numerical fonts, the
Media Playback Display offers a better read out
REPEAT
ONE: play the current track
repeatedly.
ALL: play all tracks repeatedly
ALBUM: play all tracks in the
current folder repeatedly
During the disc playback, select
random “ On” to play all tracks on
a CD in random order, select
RANDOM
forthenumericaldisplay. Usercanpressthe
button to interchange from OSD Display
InterfacetoMediaPlaybackDisplayInterface.
d
random
random play.
“
Off
”
will stop the
[
]
LIST SETTING
L
Under the Media playback, press this button
accessintoFileListSearchmode.
File Searching
User can rotate the
to navigate thru the
file list within the 10 sec time out. Press the
Audio button to confirm to start play, or to
open a selected Folder.
OSD Display Interface
00:00:16
/...F1 064KBPS/T01 MENUETTO.WMA
01/22
..
00:00:16
/...F1 064KBPS/T01 MENUETTO.WMA
01/22
..
Filter
T01 MENUETTO
T02_1KHZ_SINE_W
Repeat : Off
Mode : Normal
Filter
T01 MENUETTO
T02_1KHZ_SINE_W
Repeat : Off
Mode : Normal
T03 17HZ SINE W
T04_127HZ_SINE_
T05 997HZ SINE
T06_10007HZ _ SIN
T07 19997HZ SIN
T03 17HZ SINE W
T04_127HZ_SINE_
T05 997HZ SINE
T06_10007HZ _ SIN
T07 19997HZ SIN
Music Playing
Music Playing
Title: T01 MENUETTO
Title: T01 MENUETTO
Media Playback Display Interface
E -
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card)
[ ]
Insert the SD Card
[ ]
TRACK/FILE SELECT
Use TRACK/FILE UP (
DOWN ( ) button to move to the next track
) or TRACK/FILE
on the Disc mode. The selected track number
will appear on the display. Press and hold the
button for more than one second to fast
forward or fast rewind through the media.
Media playback mode will resume to normal
playwhenthebuttonisreleased.
Front
Back
Insert the USB Stick
Mode Change to SD Card
After an SD card is inserted into the main unit
card slot, press the
Button to select card
s
mode. The unit will start playing the files
contained on the SD card. Once the unit starts
reading the SD card successfully, the first file
on the SD card will automatically start
playback.
CAUTION
This unit does not support any portable
Hard disk / drive.
WARNING
Before removing the USB stick from the
front panel, always remember to switch
off the unit's power or switch to other
mode then remove the USB Stick. Never
try to remove the USB Stick while it is in
use. It may damage the USB Stick, may
cause permanent damage to the unit
and/or cause the unit system to freeze.
E - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTIMEDIA OPERATION
[
UndertheMultiMediaplaybackmode, pr
button can access to the MultiMedia Root
]
Once a MultiMedia disc is inserted into the unit,
the unit will automatically start the playback
from the beginning of the disc, and then the
MultiMedia MENU or ROOT or TITLE in the
MultiMedia disc will appear on the TFT monitor
and “ROOT” will be displayed on the TFT of the
unit.
LIST BUTTON
L
L
menu.
[ ]
[ ]
TRACK SELECT
1. Press these buttons to skip forward to the
beginningofthenextorpreviouschapter.
TIPS
2. Long press these buttons to fast forward or
fast rewind through the disc. Press these
buttonsagaintoresumenormalplayback.
When the MultiMedia MENU, ROOT or
TITLE is displayed on the TFT Monitor,
rotate the Encoder Volume Knob to
navigate thru the file list. Press the Audio
button to open the folder and start
playback.
[
]
FUNCTION BUTTON
f
Under the Function menu, user can have the
belowoptionsforselection:
[
]
PLAY/PAUSE BUTTON
REPEAT
1. Repeat “CH” to repeat playback
the current the chapter.
1. Pressthisbuttontopauseplayback.
2. Pressthisbuttonagaintoresumenormal
playback.
2. Repeat “TITLE” to repeat playback
the current title.
3. Repeat “ OFF” to cancel all the
Repeat function.
[
]
DISPLAY BUTTON
D
This DISPLAY interchange button can be used
to interchange between the two types of
DISPLAY INTERFACE, the 'OSD Display
Interface” & 'Media Playback Display interface'.
This is useful when playing a CD, MP3, WMA or
other music discs. If the user prefers to see the
CD Track No/MP3 File number and elapse time
with bigger numerical fonts, the Media
Playback Display offers a better read out for the
MultiMedia During playback to change the
AUDIO
audio language(MultiMedia/Divx only).
VIDEO
SETTING
Under the Video Setting mode,
there are have below options for
selection:
:
BRIGHT: to adjust the TFT Bright
level from “01” to “09”;
CONTRAST: to adjust the TFT
Contrast level from “01” to “09”;
numerical display. User can press
to interchange from OSD Display Interface to
MediaPlaybackDisplayInterface.
button
d
COLOR: to adjust the TFT Color
level from “01” to “09”;
DEFAULT: setting the Default on
will reset all options of media
function setting to factory default
setting.
ASPECT Selecting the TV Aspect setting
allows the user to select the aspect
ratio of the TV (MultiMedia and VCD only).
The following options are available:
RADIO
OSD Display Interface
4:3 = Aspect ratio of TV is 4:3.
16:9=Aspect ratio of TV is 16:9.
Both wide screen and 4:3
contents will fill the entire
screen.
Media Playback Display Interface
E -
17
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-In Mode
Select the AV Mode
AV in-2
Connect the external signal to the RCA line in
Yourcanconnectupto1AVdevice, press
ButtontoenterintotheAVmode:
AVin-1= Front panel AV in(Optional)
AVin-2= RCAbackof unit (Optional)
s
jsack located at the rearof theunit, thenpress
ButtontoselectAVin-2.
TIPS
AV in-1
If there is no any external AV System input,
then the TFT will be show “ NO VIDEO
SIGNAL”.
This unit is allowed to connect with external
Audio/Video system such like Digital Camera
or Game Console. User can connect the
external A/V system thru the A/V in jack on front
panel.
Connect the A/V In
Connect the external signal to A/V in jack
locatedatthefrontofthepanel, thenpress
Button to select A/V mode. Press Button
s
again to cancel A/V mode and retrun to
s
previous mode.
Left Track
Right Track
Ground
Video
E - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
TFT Screen Section
Screen Size: 3.2”(Measured Diagonally)
Screen Type: TFT Liquid Crystal Display active matrix
Resolution: 320 x 240
MultiMedia / CD Section
See“DiscNote”formoredetailsdescription
>90dB
>90dB
20Hzto20Khz+/-3dB
2Channel(Stereo)>60dB@1khz
Compatible Disc/Format
Signal to Noise Ratio
DynamicRange
FrequencyResponse
ChannelSeparation
Video Section
NTSC/PAL/SCEAM
Composite1.0Vp-p(+/-0.2)75-ohm
Composite1.0Vp-p (+/-0.2)75-ohm
ColorSystem
VideoOutput
VideoInput
Audio Section
MaxOutputPower
LoadImpedance(speakers)
Lineoutlevel/load
LineoutImpedance
80Wx4channels
4ohms
400mV/10kohmload
200ohm
Auxiliary Input Section
Frequencyresponse
InputMaximumVoltage
InputImpedance
20Hzto20KHz-3dB
1200mV
4.7kohm
Radio Section
FM
87.5-108.0MHz(Europe)
87.5-107.9MHz(U.S.A)
<15dBatS/N30dB
25dBat1KHz
FrequencyRange
UsableSensitivity
StereoSeparation
S/NRatio
50dB
AM or MW
FrequencyRange
522-1620Khz(Europe)
530-1720(U.S.A)
<40dBatS/N20dB
40dB
UsableSensitivity
S/NRatio
General
DC11-14.4V
OperatingVoltage
GroundingSystem
Fuse:
OperatingTemperature:
UnitMountingAngle
NegativeGround
15-AmpMiniATMType
0°Cto50°C
<30°
E - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before going through the check list, check wiring connection. If any of the problems persist
after check list has been made, consult your nearest service dealer.
Symptom
No power
Cause
Solution
The car ignition is not on.
If the power supply is properly connected to
the car accessory terminal, switch the ignition
key to “ACC”
The fuse is blown.
Replace the fuse.
Remove the disc in the player, then
put a new one.
Presence of CD disc inside
the player.
Disc cannot be
loaded or ejected
Inserting the disc in reverse
direction.
Insert the compact disc with the
label facing upward.
Clean the disc or try to play a new one.
Compact disc is extremely
dirty or defective disc.
Cool off or until the ambient temperature
returns to normal.
Temperature inside the car is
too high.
Leave the player to off for an hour or so,
then try again.
Condensation.
Adjust volume to a desired level.
Check wiring connection.
Volume is in minimum.
No sound
Wiring is not properly
connected.
The built-in microcomputer is Press the RESET button.
not operating properly due to Front panel is not properly fixed into
The operation keys
do not work
noise.
its place
The installation angle is
more than 30 degrees.
Adjust the installation angle to less
than 30 degrees.
Sound skips.
The disc is extremely dirt or
defective disc.
Clean the compact disc. Then try to play a
new one.
The antenna cable is not
connected.
The radio does not
work.
The radio station
automatic selection
does not work.
Insert the antenna cable firmly.
Select a station manually.
The signals are too weak.
Press the eject button to correct the problem.
If the error code does not disappear, consult
your nearest service dealer.
Mechanism Error
ERROR
Disc Error
Maybe disc dirty / disc scratched Replace the disc.
/disc upside down.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
E - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
|