Download from Www.Somanuals.com. All Manuals Search And Download.
BV7300 User’s Manual - page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
spond to the Region number of this Mobile
DVD Player, this Mobile DVD Player cannot
play this disc.
Safety information
CAUTION:
This mobile DVD player is a Class 1 laser
product. However, this mobile DVD player
uses a visible/invisible laser beam which
could cause hazardous radiation exposure
if directed. Be sure to operate the mobile
DVD player correctly as described in this
manual.
DISC NOTES
You can playback the following discs:
DVD VIDEO/DVD AUDIO
VIDEO CD/AUDIO CD
MP3/WMA/JPEG/MPEG4
Handling and Cleaning
- Dirt, dust, scratches and warped discs will
prevent proper operation.
- Do not place stickers or make scratches
on discs.
Use of controls or adjustments or perfor-
mance of procedures other than those
specified herein may result in hazardous
radiation exposure.
- Do not bend discs.
- A disc should always be kept in its case
when not in use to prevent damage.
- Do not place discs in the following places:
1.Direct sunlight.
Do not open covers and do not attempt to
repair this product yourself. Refer servicing
to qualified personnel.
2.Dirty, dusty and damp areas.
3.Near car heaters.
4.On the seats or dashboard.
WARNING:
- To reduce the risk of fire or electric shock,
do not expose this equipment to rain or
moisture.
- To reduce the risk of fire or electric shock,
and annoying interference, use only the
recommended accessories.
- This device is intended for continuous
operation.
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistened with isopropyl (rubbing)
alcohol. Never use solvents such as
benzene, thinner or conventional record
cleaners as they may mar the surface of
the disc.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized
by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Region Management Information
This mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not corre-
BV7300 User’s Manual - page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing new discs with rough spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the disc will not be
properly seated and the player will not
play the disc. Therefore, remove the rough
edges in advance by using a ballpoint pen
or pencil as shown on the right. Press the
side of the pen or pencil against the inside
and outside edges of the disc.
Installation
Notes:
- Choose a mounting location where the unit
will not distract the driver.
- Before the installation of the unit, connect
the wiring temporarily and make sure it is
all connected properly and the unit and the
system works.
- Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
- Consult with your dealer if installation
requires the drilling of holes or other
modifications of the vehicle.
- Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop, like an
emergency stop.
- If installation angle exceeds 30° from
horizontal, the unit may not perform
properly.
- Avoid installing the unit where it will be
subject to high temperature, such as from
direct sunlight, or from hot air, from the
heater, or where it would be subject to dust,
dirt or excessive vibration.
DIN mounting options
This unit can be installed either from the
‘Front’ (conventional DIN Front-mount) or
the ‘Rear’ (DIN Rear-mount installation
using the threaded holes on the sides
of the chassis). For details, refer to the
following illustrated installation methods.
Remove transit screws before
installation
Before installing the unit, please remove
the two transit screws.
BV7300 User’s Manual - page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. DIN front-mount (method A)
Installation opening
This unit can be installed in any dashboard
opening with dimensions as shown below:
7. Reconnect the wire harness and the an-
tenna, being careful not to pinch any wires
or cables.
8. Slide the unit into the sleeve until it locks
into place.
Installing the unit
Be sure to test all connections first, then
follow these steps to install the unit.
1. Make sure the ignition is turned off. Dis-
connect the cable from the vehicle battery
negative (-) terminal.
2. Disconnect the wire harness and the
antenna.
3. Press the RELEASE ( ) on the front
panel and remove the control panel (for
details, refer to ‘Using the Detachable Front
Panel’).
9. To further secure the unit, use the sup-
plied metal strap to secure the back of the
unit in place. Use the supplied hardware
(Hex Nut (M5mm) and Spring Washer) to
attach one end of the strap to the mounting
bolt on the back of the unit. If necessary,
bend the metal strap to fit your vehicle’s
mounting surface. Then use the supplied
hardware (Tapping Screw (5x25mm) and
Plain Washer) to attach the other end of
the metal strap to a solid metal part of the
vehicle under the dashboard. This strap
also helps ensure proper electrical ground-
ing of the unit.
4. Lift the top of the outer trim ring. Then
pull it out to remove it.
5. The two supplied keys release tabs
inside the unit’s sleeve so you can remove
it. Insert the keys as far as they will go (with
the notches facing up) into the appropriate
slots at the center of the left and right sides
of the unit. Then slide the sleeve off the
back of the unit.
10. Reconnect the cable to the vehicle
battery’s negative (-) terminal. Then replace
the outer trim ring and install the unit’s front
panel (see the steps of ‘to install the front
panel’).
6. Mount the sleeve by inserting it into the
opening of the dashboard and bend open
the tabs located around the sleeve with
a screwdriver. Not all tabs will be able to
make contact, so examine the opening to
determine which tabs will be most effective.
Bend open the appropriate tabs behind the
dashboard to secure the sleeve in place.
Removing the unit
1. Make sure the ignition is turned off, and
BV7300 User’s Manual - page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
then disconnect the cable from the vehicle
battery negative (-) terminal.
Using the detachable front panel
2. Remove the metal strap attached to the
back of the unit (if present).
Removing the front panel
3. Press the release button to remove the
front panel.
1. Press the RELEASE button to flip
down the front panel.
4. Lift the top of the outer trim ring then pull
it out to remove it.
5. Insert both of the supplied keys into the
slots at the middle left and right sides of the
unit then pull the unit out of the dashboard.
2. Pull off the front panel.
2. DIN rear-mount (method B)
If your vehicle is a Nissan or Toyota, follow
these mounting instructions: Use the screw
holes marked T (Toyota) or N (Nissan)
located on both sides of the unit to fasten
the unit to the factory radio mounting
brackets supplied with your car.
3. Store the front panel in its protective
case.
Installing the front panel
To install the front panel, insert it as shown
in the drawing below. Be sure it is fully
inserted. If not, the display or some of the
keys may not function properly.
Fasten the unit to the factory radio
mounting brackets. Align the screw holes
on the bracket with the screw holes on the
unit, and then tighten the screws (5x5mm)
on each side.
Note: The outer trim ring, sleeve and the
metal strap are not used for method B
installation.
BV7300 User’s Manual - page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring diagram
WATCHING THE VIDEO MONITOR IS FORBIDDEN WHILE DRIVING:
The “PARKING BRAKE” wire must be connected to the parking brake system of your car.
The LCD screen will display video images ONLY when the parking brake is engaged.
If the parking brake is not engaged, the screen will display the message “DISABLED
WHILE DRIVING”. This is a safety feature designed to prevent the driver from watching a
video while driving. The video output of this unit is not affected by this.
Note: In Radio Mode or CD/MP3 Mode images will be displayed on the monitor whether or
not the parking brake is engaged.
Connecting the Parking Brake line to the parking brake system built in the car
BV7300 User’s Manual - page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Features and controls
Front panel
Front panel button legend
12 RELEASE ( )
1
2
3
4
5
6
7
8
9
POWER ( ), MODE
VOL+/-
IR Sensor
1
2 INTRO (Intro Scan)
3 RPT (Repeat Mode select)
6 GO TO
13
14
15
16
17
DISP (Display)
(Fast Reverse), TUNE/TRACK Down
MUTE (turns audio off)
(Fast Forward), TUNE/TRACK Up
ST (Stereo/Mono select),
LOC (Local/Distance select)
MENU
18
19
5 STOP
AS•PS (Automatic Search/Program
Search)
4 RDM (Random Playback Mode select)
10 USB Port
11 BAND
20
A/V Input Connector
BV7300 User’s Manual - page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Back of front panel
Remote control button legend
1
2
3
4
5
6
POWER (
DISP (Display)
)
A > B (repeat section from A to B)
RPT (Repeat Mode select)
ZOOM
Cursor (arrow) keys:
UP/DOWN/RIGHT/LEFT
ENTER
7
8
SETUP
9
10
(TUNE/TRACK Down, Last Track)
(TUNE/TRACK Up, Next Track)
21
22
23
24
25
SD/MMC card slot
Disc slot
EJECT ( )
LED Warning light
RESET button
11 TITLE (DVD Title Menu),
PBC (Playback Control Mode)
12 PLAY/PAUSE (
)
13 Numeric buttons 1-9
14 MODE (Input Mode select)
15 AUDIO (Audio Setup select)
16 SUBT (Subtitle language select)
17 MUTE (turns audio off)
18 ANGLE (Camera angle selection for some
DVDs)
Remote control
19 VOL +/-
20 MENU
1
2
3
4
14
15
16
21
22
(Fast Forward)
(Fast Reverse)
23 GO TO, AS•PS (Automatic Search /
Program Search)
24 STOP ( )
25 PROG (Programmed Play mode)
LOC (Local/Distance select)
26 RDM (Random Playback mode)
MO•ST (Stereo/Mono select)
27 BAND, (Numeric button) 0
5
6
17
18
19
7
8
20
9
21
22
10
Using the remote control
11
12
23
24
Preparing The Remote Control
* Before using the remote control for the first
time, please remove the clear strip from the
bottom of the remote control.
* This remote control is designed to be used
within 6 feet of the remote sensor on the
head unit, and within a range from 30° left
to 30° right of the sensor.
25
26
27
13
* If direct sunlight is falling on the remote
sensor, it may interfere with the ability of
the remote to communicate with the head
unit.
* This remote control is a precision device.
BV7300 User’s Manual - page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
To avoid damage, please follow these
precautions:
General operation
- Do not subject it to excessive shock.
- Do not carry in a pocket.
- Do not leave in direct sunlight.
Initial system start-up
Be sure to press the RESET button (25)
when using the unit for the first time, after
all connections are completed correctly.
1. Turn off the unit power.
Battery replacement
The remote control uses a lithium button
type battery, model CR 2025 3V. Do not
use any other kind of battery in the remote.
Follow these instructions when installing or
replace the battery.
1. Remove the battery holder by pressing
the locking tab with your thumb, and slide
the battery holder out.
2. Press the RESET button.
* The RESET button on the housing must
be activated with either a ballpoint pen or
similar pointed object. The RESET button
is to be activated for the following reasons:
- Initial installation of the unit when all wir-
ing is completed.
- Some the function buttons do not operate.
- Error symbol appears on the display.
Turning power on and off
Turn on the unit by pressing button or
inserting a disc in the DISC SLOT (22).
When system is on, press and hold the to
turn off the unit.
Warning LED
The LED (24) will flash if the front cover is
not properly inserted into the main unit.
2. Replace the battery with the same type
of battery with the (+) side facing up.
ESP function
The unit features an anti-shock feature,
which buffers a certain amount of the re-
corded program into memory so that if the
unit skips due to rough road conditions, the
music or video will be uninterrupted. The
time of the buffered content varies depend-
ing on the disc type:
CD,VCD:18 seconds
MP3:160 seconds
DVD: 6 seconds
MPEG4: 20 seconds
3. Gently push in the holder until it is se-
curely locked in place.
Mute function
To turn off the sound instantly, press the
MUTE button. To return it to the prior sound
level, press MUTE again.
Mode function
Press MODE repeatedly to switch between
DVD, USB,SD/MMC , AV and TUNER
modes.
BV7300 User’s Manual - page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Volume Level
Selecting Stations
Press VOL+/- to adjust the volume level.
- Press preset station button 1-6 to select
a station which has been stored in the
memory.
Last position memory
- During disc, USB or SD/MMC card play-
back, press and hold the to turn off the
unit, when you next turn on the unit, the
DVD unit will resume playing from the point
that it was interrupted.
- During disc, USB or SD/MMC card play-
back, if you press MODE to switch to a dif-
ferent mode, when you next return to DVD
mode, playback will resume from the point
at which it was interrupted.
- Press and hold the or buttons until
“MANUAL” appears on the screen, then
press or buttons to select a station.
If both buttons have not been pressed
for several seconds, the unit will return to
automatic seek mode.
Automatic Memory Storage & Program
Scanning
- Automatic Memory Storing
This feature is used to automatically set up
presets for the radio. Press and hold the
AS•PS to start the tuner searching the fre-
quency band and storing the six strongest
stations as presets.
Radio operation
- Program Scanning
RADIO
After the presets have been recorded,
when you press this button, the radio will
scan the preset buttons in order. It will play
a station for a few seconds, and then move
to the next. When you hear a station that
you wish to listen to, press the AS•PS but-
ton again to stop the scanning.
FM1
STEREO LOC
1 0 7 . 1 5 M H Z
2
VOLUME 25
AM 07:12
Selecting the frequency band
Press BAND button repeatedly to select
the desired radio band.
Setting up Presets Manually
To set up the presets manually, tune to the
desired station using the
and buttons.
Stereo/Mono
When you find a station you like, press and
hold the desired preset button for a few
seconds to store it.
FM listening is generally done in Stereo
mode. However, if the signal is weak or
reception is not as good as you would like,
switching to Mono mode usually improves
the overall sound quality. To switch to Mono
mode, press ST (or MO•ST on the remote
control). Press it again to return to Stereo
mode.
Local/Distant
In urban settings, most stations are strong
enough to listening in LOCAL mode.
However, if a station seems too distant to
be received well, try switching to DISTANT
mode by pressing and holding ST/LOC
(or pressing LOC on the remote control).
Press it again to return to LOCAL mode.
BV7300 User’s Manual - page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V menu settings
You can adjust various settings of the unit from the AV menu.
The AV menu contains the menu items and submenus shown in the figure below:
1. Press MENU to activate AV menu.
2. Use the arrow buttons to select a menu item.
3. Press VOL+/- button to increase or decrease the parameter you have selected.
4. Repeat steps 2 and 3 to adjust other items if necessary.
5. Press ZOOM or MODE to return to previous menu.
6. Press MENU to finish the procedure.
MAIN MENU
AUDIO
PICTURE
SETUP
AUDIO MENU
PICTURE MENU
SETUP MENU
VOLUME
BASS
00
00
FADER
EQ
R.F
BRIGHT
00
00
00
TINT
00
SYSTEM
CLAS
OFF
ON
CONTRAST
COLOR
DISP.M
4:3
TREBLE
BALANCE
00
LOUD
SUB.W
DEFAULT OFF
L.R
TIME
ON
12
TIME.M
AM 11:00
Hour
Minute
BV7300 User’s Manual - page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio menu
AUDIO MENU
VOLUME
BASS
00
00
FADER
EQ
R.F
CLAS
OFF
ON
TREBLE
BALANCE
00
LOUD
SUB.W
L.R
1. Press the arrow buttons to select a menu item you wish to adjust.
2. Press VOL+/- button to adjust the item selected.
Volume level: 0 to 63
Bass level: -7 to +7
Treble level: -7 to +7
Balance: 15L to 15R
This setting adjusts the balance between the left and right speakers.
Fader: 15R ~ 15F
This setting adjusts the balance between the front and rear speakers.
Equalization: Flat, Classic, Jazz, Pop
Loudness: ON/OFF
Loudness introduces a special low and high frequency emphasis at low listening levels.
Sub-woofer: ON/OFF
This unit is equipped with a subwoofer output. If you connect this output to a powered
suwoofer or amp/subwoofer system, enable the output by selecting ON.
BV7300 User’s Manual - page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
PICTURE MENU
BRIGHT
00
00
00
TINT
00
CONTRAST
COLOR
DISP.M
4:3
DEFAULT OFF
1. Use the arrow buttons to select a menu item you wish to adjust.
2. Press VOL+/- button to adjust the item selected.
Brightness: 0 to 63
Adjust this setting if the picture is too bright or too dark.
Contrast: 0 to 63
Use this setting to adjust the contrast of the picture.
Color: 0 to 63
Use this setting to adjust the color of the picture.
Tint: 0 to 63
Use this setting to adjust the tint to make colors appear most natural.
Disp.M: (Display monitor type)
Select a setting which is appropriate to the monitor you are using.
Monitor Type
16:9: Select this when the aspect ratio of your monitor is 16:9 (widescreen).
4:3: Select this when the aspect ratio of your monitor is 4:3. If you view a widescreen
picture, black bars will appear to fill the left and the right sides of the screen.
Default: ON/OFF;
Select this to restore to factory settings.
BV7300 User’s Manual - page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
SETUP MENU
SYSTEM
TIME
ON
12
TIME.M
AM 11:00
Hour
Minute
1. Use the arrow buttons to select a menu item you wish to adjust.
2. Press VOL+/- button to adjust the item selected.
3. Repeat steps 1 and 2 to adjust other items if necessary.
4. Press ZOOM or MODE to return to previous menu.
Time: ON/OFF
Turns the clock display on/off.
Time.M: 12 / 24
Use this setting to select 12 hour clock mode or 24 hour clock mode.
Clock setting:
Use this menu item to set or make changes to the time displayed on the clock.
1). Press the ◄/► (on the remote control) button to move to the Hour item or Minute item.
2). Press the VOL+/- (on the panel) or ▲/▼ (on the remote control) to set clock.
BV7300 User’s Manual - page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc operation
For CD:
Loading/Removing a disc
1. Press the button (7) to flip down the
front panel.
2. Insert a disc with the label side facing up.
The disc will be drawn into the player au-
tomatically. The information for the current
disc will be shown on the screen.
* To eject the disc, press the button.
Selecting tracks in single steps
-Press button or button to skip to the
previous or next track.
-Press and hold button or button to fast
reverse or fast forward. Return to normal
mode by releasing this button.
When you insert a DVD disc, a screen
similar to the one below will appear when
you press the SUB-T button:
Pause playback
Press button to pause disc playback.
Press it again to resume playback.
Stopping playback
- Press the (stop) briefly to stop playback.
Press button to resume playback.
- Press button twice and then press but-
ton to stop playback and return to the first
track on the disc.
When you insert a CD, MP3, JPEG or
MPEG4 disc, the following screen appears:
Fast Forward/Fast Reverse
1. Fast Forward
Press button repeatedly to increase the
speed of fast forward as follows:
FORWARD 2X
4X
8X
20X
In fast forward mode, press button to
return to normal playback.
2. Fast Reverse
Press button repeatedly to increase the
speed of fast reverse as follows:
Press the DISP to switch to the following
interface:
For MP3/JPEG/MPEG4:
BACKWARD 2X
4X
8X
20X
In fast reverse mode, press button to
return to normal playback.
Repeat play/Paragraph repeat play
- Repeat play:
Use this function when you wish to repeat
a whole disc, a track or a directory on the
disc.
1) Press RPT button repeatedly to select
different repeat modes.
2) For different kinds of discs, pressing RPT
button has different effects.
Use cursor buttons ( / / / ) and the
ENTER button to select item.
BV7300 User’s Manual - page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
For CD/VCD/SVCD:
REP 1 REP ALL
Previewing all tracks (Intro scan)
Press the INTRO button to play the first
several seconds of each track on the cur-
rent disc. Press the button again to stop
intro scan and return to normal mode.
REP OFF
For MP3:
REP 1
OFF
REP DIR
REP ALL
REP
REP
For DVD:
REP CHAPTER
OFF
REP TITLE
Special disc operation
Disc menu operations
NOTES:
Menu-driven playback is possible while
playing a disc with menu-driven features or
when playing a VCD with PBC (Playback
Control).
1.Press the TITLE/PBC and a title list or
disc menu will appear on the monitor.
2.Use cursor buttons ( / / / ) and the
ENTER button to select the items you want
on the menu.
REP 1: Only one track (file) is played
repeatedly.
REP DIR: A single folder of tracks is played
repeatedly.
REP CHAPTER: A chapter is played
repeatedly.
REP TITLE: A title is played repeatedly.
REP ALL: An entire disc is played repeat-
edly.
REP OFF: Normal playback mode.
Note: The Repeat feature is not support-
ed for VCD 2.0 discs when PBC (Playback
Control) is on.
* On some discs, you can select the
items with the numeric key.
Multi-subtitle language function
Some DVD discs have multiple subtitle lan-
guages, allowing you to select the subtitle
language recorded on disc.
- Paragraph repeat play:
Use this function when you wish to repeat
play a desired paragraph. A-B repeat
allows a selected passage to be playbed.
Press the SUB-T button to switch between
the different languages recorded on the
disc.
Press A-B button at the start of the desired
passage.
REPEAT A-
Notes:
- Not all discs will allow changing the sub-
title during playback. In these cases, select
the desired subtitle language from the DVD
menu.
- There may be a delay before the selected
subtitle language appears.
- For some discs, the subtitles will be dis-
played even when this is set to off.
- The number of available languages varies
from disc to disc.
Press A-B button at the end of the passage.
REPEAT A-B
The unit will repeat playing the passage
you just set from A to B. To return to normal
playback, press A-B button again.
REPEAT CANCEL
Playing in random order
Press the RDM button to switch the random
mode on/off. In random mode, tracks (files)
on the disc will be played in random order.
Multi-audio language function
For DVD:
For DVD discs which have multiple
language soundtracks, you can press the
BV7300 User’s Manual - page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO button to switch between the audio
languages recorded on the disc.
Notes:
- Some time may be required for the angle
to change.
- Depending on the disc, the viewing angle
may switch in one of two ways.
1. Seamless: The angle switches
smoothly.
Notes:
2. Non-seamless: When the angle is
switched, a still picture is displayed first,
after which the angle switches.
- The number of available viewing angles
varies from disc to disc.
- The number of available languages var-
ies from disc to disc.
- Some discs only contain one soundtrack
language.
- Not all discs will allow changing the sub-
title during playback. In these cases, select
subtitle select mode from the DVD’s menu.
- The function only works for discs having
scenes recorded at different angles.
ZOOM function
For VCD/SVCD:
Press ZOOM button repeatedly to enlarge
or reduce the size of image according to
the disc as follows:
Some VCD/SVCD discs have multiple
audio channels, You can press AUDIO to
select the desired audio channel(s) to play.
ZOOM 2
ZOOM 1/2
ZOOM OFF
ZOOM 3
ZOOM 1/3
ZOOM 4
ZOOM 1/4
In zoom in mode, press the / / / but-
tons to move the zoomed-in area.
STEREO: Normal stereo (left/ right) play-
back.
Program play function
MONO L: Left audio channel only.
MONO R: Right audio channel only.
Press PROG during playback to activate
the programing editing interface as follows:
Notes:
For VCD/SVCD/CD:
- Some discs only contain one audio
channel.
Multi-angle function
You can view the same scene at different
angles if the disc has been recorded with
multiple viewing angles .
For DVD/MP3/MPEG4:
Press ANGLE during playback. The follow-
ing information will be shown:
This example indicates that you are cur-
rently viewing the first of three available
camera angles. Press the ANGLE button
to select a different angle.
BV7300 User’s Manual - page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC indication (only for VCD with PBC)
Repeat playback indication
1) Use the / / / cursor buttons to select
the item that you want to program. The item
you selected will be highlighted.
2) Input the track number that you want to
program using the numeric buttons (0-9) on
the remote control.
: One track repeat playback
: One directory repeat playback
: The whole disc repeat playback
: Exit repeat playback mode
3) Press the / / / cursor buttons to
move to “PLAY” operation button and then
press the ENTER button to program the
playback sequence.
GOTO function
Press GOTO button, the screen will display
the following message.
FOR DVD:
On Screen Display function
Press and hold the SUB-T button during
playback to display information of the cur-
rent disc on the screen:
FOR VCD/CD/MP3:
For DVD:
- To search for a particular title/chapter/
track
1. Use the / / / cursor buttons to move
to / / .
2. Use the numeric keys to input the
desired Title/ChapterTrack, and then press
the ENTER button to confirm.
For VCD/CD/MP3/JPEG:
- To search for a particular point by
playing time
1. Use the / / / cursor buttons to move
Disc type
Playback information
to
.
TT 1/3: Current title/Total title
CH 1/1: Current Chapter/Total Chapter
TRK 9/18: Current Track/Total Track
Time indication
: Elapsed playing time of the disc
-: Remaining time of the disc
T : Elapsed playing time of the current
title
2. Use the numeric keys to input the
elapsed playing time of the current title or
of the disc, and then press the ENTER but-
ton to confirm.
T-: Remaining time of the current title
C: Elapsed playing time of the current
chapter
C-: Remaining time of the current
chapter
Audio language or audio channel
indication
Subtitle language indication
View angle indication
Mute indication
BV7300 User’s Manual - page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Data disc playback
USB playback
When you insert a data disc including audio
(MP3), movie (MPEG4) or picture (JPEG)
files into the disc slot, the following main
menu will appear:
This disc player features a front panel USB
interface (10). A USB device can be con-
nected to this port.
When you insert a USB device into the
USB connector, the DVD player will read
the USB automatically.
The unit gives priority to a disc or SD/MMC
card. If you insert a disc into the disc slot or
insert a SD/MMC card into the SD/MMC in-
terface while playing from the USB device,
the unit will play the disc or the SD/MMC.
Press the MODE button to switch to the
USB playback mode.
Press the DISP to switch to the following
interface.
Note:
When reading the USB device, please don’t
unplug it. If the player is unable to read the
device, check if the device is in good condi-
tion. You may also try removing the device
fully from the port, and reinserting it again.
- The main unit can only support the stan-
dard USB-memory format approved by
Microsoft.
- USB MP3 player is not a “standard,” which
means different brands or models have
their own standards. Therefore, this unit
may not support every MP3 player.
Use the cursor buttons (▲/▼/◄/►) to
select the required file type (Music
, Picture
or Movie
) or a folder / file
on the screen you wish to play, then press
the ENTER button to confirm your selection.
- When connecting an MP3 player which
has a normal non-rechargeable battery in
the player, you should remove the battery
from the MP3 player before you connect it
to the USB port. Otherwise, the battery may
explode.
Playback type icons:
AUDIO Playback mode (default)
JPG Playback mode
MOVIE Playback mode
In JPEG playback mode or MOVIE play-
back mode, press the (STOP) to return to
the main menu.
BV7300 User’s Manual - page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory card playback
This disc player features a SD/MMC
memory card slot.
When you insert a SD/MMC card into the
memory card slot, the DVD player will read
the SD/MMC card automatically.
The unit gives first playback priority to the
card in the slot. If you insert a disc into the
disc slot while reading the SD/MMC card,
the unit will play the disc. Press the MODE
button to switch back to the card reading
mode.
Note:
When reading the memory card, please
don’t touch or remove the card.
If the player is unable to read the card,
please check if the card is in good condi-
tion. You may also wish to try removing the
card fully from the reader, and reinserting
it again.
A/V IN operation
This disc player offers you the option of
using the front panel auxiliary A/V input
connector to connect a video game, digital
camera/camcorder or other units you wish
to use in your mobile audio/video system.
To connect a video device to the auxiliary
A/V input, first connect it with the cable
provided. Then press the MODE button to
turn AV IN mode ON or OFF.
BV7300 User’s Manual - page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
tached to the output and select NTSC or
PAL as needed. If you know the type of
monitor, you should choose the type in this
menu rather than letting AUTO SELECT do
it for you. This is because there may be an
undesirable small delay and some flicker-
ing of the screen during the AUTO-SELECT
process.
Setup
In DVD mode, when the disc is playing or
in stop mode, press SETUP button to enter
the Setup menu.
1. When the cursor is in the upper part
of the menu, use
/
buttons to move
between the different pages.
2. Press button to move the cursor to the
setup page below. Then you can use the
SCREEN SAVER
Like a computer monitor, video screens
can “burn in” if a still image is displayed
too long on the screen. This unit features
a “screen saver” which produces a moving
image to avoid burn-in, if SCREEN SAVER
is enabled in the Setup menu.
/
buttons to move between the different
setup options.
3. Press or the ENTER button to move
to the choice list of each setup option, and
then use
to adjust your selection.
/
buttons and ENTER button
4. When the setting is complete, press
SETUP button to return to normal mode.
* When settings are changed, old settings
are overwritten. Make note of the current
settings before making changes. If the ve-
hicle’s battery is disconnected, the settings
will be cleared and will return to the factory
settings when power is next applied.
SETTING the TV TYPE
TV types can vary based on their aspect
ratio. The common monitors fall into one of
three categories: 4:3 (PS/Pan and Scan),
4:3 (LB /Letterbox) or 16:9 (Widescreen).
Playing a video recorded in one aspect
ratio on a monitor with a different ratio can
result in some mismatches and undesir-
able display distortion or cutoffs. Read the
following to assist you in setting up the TV
type:
System setup
When you first open the setup menu, you
will see the System Setup page:
4:3 PS (PAN SCAN)
Select this when connected to a conven-
tional 4:3 size monitor. The picture will fill
the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie
at the extreme left and right sides will not
be visible when playing a 16:9 format
movie.
TV SYSTEM
TV SYSTEM is used to select the TV output
mode. This player can play discs recorded
in either PAL or NTSC formats.
Select NTSC format when the unit is con-
nected to an NTSC TV.
4:3 (Pan and Scan) format is the factory
default setting for this player.
Select PAL format when the unit is con-
nected to a PAL TV.
You can also choose AUTO SELECT,
which will sense the type of monitor at-
4:3 (LETTER BOX)
When you are playing a widescreen format
video on a normal (4:3) monitor, the best
BV7300 User’s Manual - page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
way to view this is in (4:3) letterbox format.
You can see the full picture, but there will
be a black band at the top and bottom of
the screen.
4) Press the
restriction level (1 to 8) and then press the
ENTER button.
/
button to select the
5) When the setting is complete, press the
SETUP button to return to normal mode.
DEFAULT
Select DEFAULT and confirm it to restore
all the System Settings to those pro-
grammed at the factory, except the Paren-
tal Controls and Password.
16:9 (WIDESCREEN)
Select this format when connected to a
widescreen TV.
Language setup
When you open the language setup menu,
you will see the following screen:
PASSWORD
The Password system is used in conjunc-
tion with the Parental Controls settings to
prevent a young person from changing the
settings without permission. The factory
default password is 0000. If you wish to
change this, enter 0000 and when prompt-
ed, enter a different 4-digit number.
This menu provides many choices for the
menu, DVD and subtitle languages. The
languages for the DVD player in its various
menus are set in different menus than
those choices you might make for the
playback of a particular disc. Please note
that language options vary from disc to disc,
and some settings may be unavailable on
some discs.
PARENTAL CONTROL LEVEL
Use this function to restrict the viewing
of movies to children of appropriate age
levels.
1) Press the
/
button to select “PASS-
WORD” then press the ENTER button.
2) The password input mode is now acti-
vated. Use the numeric keypad to input the
4-digit password, then press the ENTER
button. (The factory default password is
“0000”)
OSD LANGUAGE:
ENGLISH/GERMAN/SPANISH/FRENCH/
PORTUGUESE/ITALIAN/RUSSIAN/POLISH
AUDIO LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/
PORTUGUESE/ITALIAN/RUSSIAN/POLISH
3) Press the
/
button to select “RATING”
then press the ENTER button. The restric-
tion level (parental level) input display
appears.
SUBTITLE LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/
PORTUGUESE/ITALIAN/RUSSIAN/POLISH
BV7300 User’s Manual - page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
More about this player
MENU LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/
PORTUGUESE/ITALIAN/RUSSIAN/POLISH
About parental controls
Commercially-recorded DVD discs have
parental level assignments. The range of
parental controls is from 1 to 8. In general,
this range corresponds to established
movie rating systems. Movie rating sys-
tems may vary depending on the country in
which you live. At the bottom of this page
is a chart showing the rating system and
corresponding Parental Control ratings for
the USA.
Audio setup
When you open the AUDIO menu, you will
see the following screen:
The player can be set in a similar way. If the
player’s parental level is set to 8 it will play
all discs. If the player’s parental level is set
below 8, only discs with a lower or equal
parental level will play.
1) AUDIO OUT: Change among SPDIF/OFF,
SPDIF/RAW and SPDIF/PCM.
2) KEY: Change among b, -4, -2, 0, +2, +4,
#.
For example, if the player is set to 5, only
discs with parental control ratings of 1-5 will
play. To play a disc with a higher number
rating, you must change the player’s rating
to a higher number.
Digital setup
When you open the DIGITAL SETUP menu,
you will see the DIGITAL SETUP screen:
Consider a disc that is suitable for most
audiences, and is rated as level 2 for the
most part. However in the middle there are
also scenes rated at 5 and 7 (not suitable
for children). Alternative scenes with lower
rating are included. The player plays the
highest rated scene that the parental set-
ting allows.
A section of the disc can have several dif-
ferent sequences that vary in parental con-
trol level. In the above example of a disc
with parental control, the player will show a
different section depending on the parental
control level set in the player’s menu.
1) OP MODE: Change among LINE OUT/
RF REMOD.
- LINE OUT: LINE OUT mode, with digital
dialog normalization.
- RF REMOD: RF REMODULATION mode,
with heavy compression and digital dialog
normalization.
2). DYNAMIC RANGE: Change among
FULL, 6/8, 4/8, 2/8, OFF.
In this way parents can control the content
of films and there is no indication that any
censorship has occurred.
Unlock
KID SAFE
G
PG
PG 13
Unlock
PG-R
R
NC-17
ADULT
3). DUAL MONO: Change among STEREO,
MONO L, MONO R, MIX MONO.
1
2
3
4
5
6
7
8
BV7300 User’s Manual - page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing MP3 discs
• Only “baseline” type JPEG images can be
displayed on this player. Ths is the typical
format used in digital cameras and web
cameras.
What is MP3?
MP3 (MPEG-1 Audio Layer 3) is a
compression standard prescribed by the
ISO, the International Standardization
Organization and MPEG, which is a joint
activity institution of the IEC.
“Progressive” (typically used for website
display) or “lossless” (an older format
which is rarely used today) JPEG files
cannot be played. So be sure you are
saving the files in the proper format. If
you play a progressive or lossless JPEG
image, a black screen will appear. When
you next select a baseline image, you may
experience some delays.
MP3 files contain compressed audio data.
MP3 encoding is capable of compressing
audio data at extremely high ratios,
reducing the size of music files to as much
as one-tenth their original size. This is
achieved while still maintaining near-CD
quality. The MP3 format realizes such
high compression ratios by eliminating
the sounds that are either inaudible to the
human ear or masked by other sounds.
Playing MPEG discs
- This unit can play back MPEG 1 or 2 files
with the extension code <.mpg>.
- Audio stream should conform to MPEG1
Audio Layer 2.
Corresponding file systems
This device supports discs formatted
with ISO9660 level 1 or level 2. Under
the ISO9660 standard, there are some
restrictions to remember.
Frequently asked questions
The maximum nested folder depth is 8
(including the root directory). The number
of characters for a folder/file names are
letters A-Z (all caps), numbers 0-9, and ‘_’
(underscore).
- I inserted a DVD disc, but it cannot be
played. The message “REGION ERROR”
is displayed.
This device also can play back discs in
Joliet, Romeo, etc., and other standards
that conform to ISO9660. However,
sometimes the file names, folder names,
etc., are not displayed correctly.
DVD players and discs all have “REGION
CODES.” If the region code number on the
DVD disc does not correspond to the region
number of this DVD player, the unit cannot
play the disc.
- When I insert a DVD disc, there is a
window shown on the screen for me to
enter a 4 character password. Why?
Playing a JPEG disc
When preparing a disc of jpeg images to be
shown using the DVD player, please note
that following guidelines:
The current disc has a “Parental Control”
level, and the player’s parental level is set
below the level of the disc. To view this disc,
you should enter the correct password to
play the disc normally.
• The recommended image size is 640 x
480 pixels. If a file is recorded at a higher
resolution, the player must resample it,
which will cause delays in displaying the
image.
NOTE:
To set the “Parental Control” level, please
refer to “Parental Control Level” on page 22.
BV7300 User’s Manual - page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
[ GENERAL ]
Power Supply Requirements:
DC 12 Volts, Negative Ground
Chassis Dimensions:
7”W X 6.3”D X 2”H
Tone Controls:
- Bass (at 100 Hz)
- Treble(at 10 kHz)
+10 dB
+10 dB
Maximum Output Power: 80W X 4CH
Current Consumption: 15 Ampere (max.)
[ DVD PLAYER ]
Signal to Noise Ratio: > 50 dB
Channel Separation: > 40 dB
Frequency Response: 20Hz - 20 KHz
[ MONITOR SCREEN ]
Screen: 3.2 inch TFT LCD
Number of pixels: 16,777,216 pixels
Resolution: 959 X 240 pixels
[ RADIO ]
FM TUNER
Frequency range: 87.5 -107.9 MHz
IF:
10.7 MHz
Stereo Separation: >25dB
AM TUNER
Frequency range: 530 - 1710 KHz
IF:
450 KHz
BV7300 User’s Manual - page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Does Not Play
Troubleshooting
Be sure that the disc label faces up.
Clean the disc.
Check if the disc is defective by trying
another disc.
If it appears that your DVD unit is faulty,
please first consult this checklist. It may be
that something simple has been over-
looked.
No Sound
Check the audio connections.
Under no circumstances should you try to
repair the player yourself, as this will void
the warranty. Only qualified service person-
nel may remove the cover or service this
player.
The Player Does Not Respond to the
Remote Control
Aim the remote control directly at the sen-
sor on the front of the player.
Remove any obstacles which may inter-
fere with the signal path.
No Power
If the power supply is connected to the
car accessory circuits, but the engine is not
turned on, switch the ignition key to “ACC.”
Check if the fuse is blown. Replace with a
new fuse if necessary.
Inspect or replace the remote control
battery.
Picture is distorted or Only Black and
White
The disc format is not according to the
TV-set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu (see page
21).
Check if the POWER button on the front
of the player is set to ON.
No Picture
Check if the monitor or TV is switched
ON.
No Audio at Digital Output
Check if select proper mode has been
selected (such as Disc Play mode or AV
mode).
Check the digital connections.
Check the Digital Audio menu to make
sure that the digital output is correctly set.
Check if the audio format of the selected
audio language matches your receiver’s
capabilities.
Check the video connections.
Distorted Picture
Check the disc for fingerprints and clean
it with soft cloth, wiping from center to the
edge.
Buttons Do Not Work
Press Reset button on the front panel of
the DVD unit.
Sometimes a small amount of picture
distortion may be present. This is not a
malfunction.
Completely Distorted Picture
The disc format is not the same as the
TV-set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu (see page
21).
No Color in Picture
The disc format is not the same as the
TV-set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu (see page
21).
BV7300 User’s Manual - page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
|