The Bose® Lifestyle® Amplifier
Owner’s Guide
January 4, 2002
AM262840_00_V.pdf
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions – for all components before
11. Only use attachments/accessories specified by the
using this product.
manufacturer.
2. Keep these instructions – for future reference.
12. Use only with the cart, stand, tripod,
bracket or table specified by the
3. Heed all warnings – on the product and in the
owner’s guide.
manufacturer or sold with the appa-
ratus. When a cart is used, use cau-
tion when moving the cart/apparatus
combination to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture –
Do not use this product near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, near a
swimming pool, or anywhere else that water or mois-
ture are present.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time – to prevent
damage to this product.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way: such as power-supply cord or
plug is damaged; liquid has been spilled or objects
have fallen into the apparatus; the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped – Do not attempt to
service this product yourself. Opening or removing
covers may expose you to dangerous voltages or
other hazards. Please call Bose to be referred to an
authorized service center near you.
6. Clean only with a dry cloth – and as directed by
Bose® Corporation. Unplug this product from the wall
outlet before cleaning.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions –
To ensure reliable operation of the product and to pro-
tect it from overheating, put the product in a position
and location that will not interfere with its proper venti-
lation. For example, do not place the product on a
bed, sofa, or similar surface that may block the ventila-
tion openings. Do not put it in a built-in system, such
as a bookcase or a cabinet that may keep air from
flowing through its ventilation openings.
15. To prevent risk of fire or electric shock, avoid over-
loading wall outlets, extension cords, or integral
convenience receptacles.
8. Do not install near any heat sources, such as radia-
tors, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
16. Do not let objects or liquids enter the product – as
they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-
type plug has two blades and a third grounding
prong.The wider blade or third prong are provided
for your safety. If the provided plug does not fit in
your outlet, consult an electrician for replacement
of the obsolete outlet.
17. See product enclosure bottom for safety related
markings.
18. Use Proper Power Sources – Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
19. Avoid Power Lines – Use extreme care when install-
ing an outside antenna system to keep from touching
power lines or circuits, as contact with them may be
fatal. Do not install external antennas near overhead
power lines or other electric light or power circuits, nor
where an antenna can fall into such circuits or power
lines.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience recep-
tacles, and the point where they exit from the appa-
ratus.
AM262840_00_V.pdf
January 10, 2002
2a
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
20. Ground All Outdoor Antennas – If an external
antenna or cable system is connected to this product,
be sure the antenna or cable system is grounded. This
will provide some protection against voltage surges
and built-up static charges.
Note: Unauthorized modification of the receiver or radio
remote control could void the user’s authority to operate
this equipment.
This product complies with the Canadian ICES-003
Class B specifications.
Section 810 of the National Electrical Code ANSI/NFPA
No. 70 provides informaiton with respect to proper ground-
ing of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connec-
tion to grounding electrodes, and requirements for the
ground electrode. Refer to the antenna grounding illustra-
tion on this page.
Antenna grounding
Example of antenna grounding as per National Electrical
Code, ANSI/NFPA 70.
Antenna lead-in wire
Information about products that
generate electrical noise
Ground clamp
Antenna discharge unit
(NEC Section 810-20)
If applicable, this equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, this is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by
one or more of the following measures:
Grounding conductors
(NEC Section 810-21)
Electric service
equipment
Ground clamps
Power service grounding electrode
system (NEC ART 250, Part H)
Note to CATV system installer
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC (of USA)
that provides guidelines for proper grounding. In particular,
it specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as is practical.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a different circuit
than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
©2001 Bose Corporation,
The Mountain, Framingham, MA
01701-9168 USA
255805 AM Rev.00 JN10494
2b
January 10, 2002
AM262840_00_V.pdf
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking the carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a location for your Lifestyle® stereo amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the Lifestyle® stereo amplifier to a multi-room interface . . . . . . . . . . . . . . . . .
Connecting the Lifestyle® stereo amplifier to a Lifestyle® media center . . . . . . . . . . . . . . .
4
4
5
7
9
Setting up the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting Zone 2 Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the Lifestyle® stereo amplifier to a Model 20 music center . . . . . . . . . . . . . . . 11
Connecting the Lifestyle® stereo amplifier to a Model 5 music center . . . . . . . . . . . . . . . . 13
Connecting speakers to your Lifestyle® stereo amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Checking to see if you have a dual voltage Lifestyle® amplifier . . . . . . . . . . . . . . . . . . . . . 15
Powering-up your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning the amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Protecting outdoor wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Warranty period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
For your records
The serial number is located on the bottom panel of your Lifestyle® stereo amplifier.
Serial number: ____________________________
Purchase date: ______________________________________
We suggest you keep your sales receipt and warranty card together with this owner’s guide.
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
3
®
Setting up your Lifestyle Stereo Amplifier
Before you begin
Thank you for purchasing the Lifestyle® stereo amplifier. The Lifestyle® stereo amplifier provides you with a
simple solution when you want to add Bose® non-powered environmental speakers or Bose non-powered
accessory speakers to your Lifestyle® system. Bose proprietary Integrated Signal Processing technology,
featured in the amplifier, ensures full, rich stereo sound, even when the speakers are playing at low volumes.
By using the Lifestyle® stereo amplifier to expand your system, you can enjoy Bose quality sound and Life-
style® system convenience in your yard, patio, swimming deck, garage, or utility room.
Unpacking the carton
WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children.
Carefully unpack the shipping carton. Make sure the shipping carton for your Lifestyle® stereo amplifier
includes the parts identified in Figure 1. We recommend saving all packing materials. You may need them
later. The original packing materials provide the safest way to transport this product.
Note: Locate the serial number on the bottom panel of the amplifier, and write it in the appropriate blank on
page 3.
If any part of the product appears to be damaged, do not attempt to use it. Contact your authorized Bose
dealer immediately, or call Bose Customer Service. Refer to the address list enclosed in the product packag-
ing for correct phone numbers.
Figure 1
Contents of the shipping
carton
30-ft audio input cable
PN197406
Lifestyle® stereo amplifier
Owner’s guide
Power cord*
USA/Canada (120V)
* The Lifestyle® stereo amplifier includes a 120V AC (mains) power cord for use in the USA and Canada,
or the appropriate 230V or 240V power cord for international use. Dual voltage units include a 120V
power cord and a 230V plug adapter. See “Checking to see if you have a dual voltage Lifestyle® ampli-
230V
Europe (230V)
plug adaptor
UK/Singapore (230V)
Australia (240V)
Note: Use only the power cord supplied with your Lifestyle® stereo amplifier. If the power cord does not fit
your power (mains) outlet, DO NOT alter the plug in any way. Contact Bose Customer Service for assistance.
Note: The Lifestyle® stereo amplifier is designed for use with Bose non-powered environmental speakers or
Bose non-powered accessory speakers ONLY.
CAUTION: If you purchased a dual voltage unit, DO NOT plug it into an AC (mains) outlet until you check
the position of the voltage selection switch on the rear panel of the product. Using the wrong voltage setting
may cause damage to your product. See “Checking to see if you have a dual voltage Lifestyle® amplifier” on
4
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Setting Up Your Lifestyle® Stereo Amplifier
®
Selecting a location for your Lifestyle stereo amplifier
Select a location for your Lifestyle® stereo amplifier and mount it according to the following guidelines.
CAUTION: DO NOT mount the amplifier on surfaces that are not sturdy enough, or that have hazards con-
cealed behind them, such as electrical wiring or plumbing. The amplifier must be placed indoors. It is nei-
ther designed nor tested for use outdoors or on boats.
Although the amplifier does not need to be situated close to either your Lifestyle® system or the accessory
speakers, consider the following guidelines when selecting a location for your amplifier:
• Locate the amplifier indoors and within 8 feet (2.5 m) of a power outlet.
• Make sure that the amplifier is located within the reach of the supplied 30-foot audio input cable.
• Place the amplifier in an area where the maximum ambient temperature is less than 104°F (45°C).
• For optimum performance, place the amplifier in a well-ventilated area.
• DO NOT PLACE THE AMPLIFIER IN A COMPLETELY ENCLOSED AREA – If the amplifier is installed on a
shelf, or in a bookcase, or inside an entertainment center, maintain 2.0 inches (5.0 cm) minimum clearance
(Figure 2) on all sides of the amplifier with an open area of 3.0 inches (7.5 cm) minimum immediately above
it to allow for air flow. If adequate ventilation is not provided, the amplifier will automatically protect itself
by reducing its volume level in order to limit its temperature.
• DO NOT place the amplifier on any heat-sensitive surface, such as the finished surface of fine furniture.
Like all electrical equipment, it generates some heat.
• DO NOT use the amplifier in a damp location. It is important to prevent moisture from getting into the unit.
Figure 2
3.0 in.
2.0 in.
(7.5 cm)
Required clearance
between the amplifier and
any material or surface.
(5.0 cm)
2.0 in.
(5.0 cm)
2.0 in.
(5.0 cm)
2.0 in.
(5.0 cm)
• When mounting the amplifier on a horizontal surface like a floor or shelf (Figure 3), the amplifier’s rubber
feet provide stability and prevent scratches.
Figure 3
Horizontal surface mounting
• To mount the amplifier on a wall (Figure 4), remove the rubber feet and use the existing guide holes in the
Figure 4
Wall mounting
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Setting Up Your Lifestyle® Stereo Amplifier
Figure 5
To mark hole locations, first remove the rubber
feet. Then, hold the amplifier in place and mark
the wall through the clearance holes in the
amplifier enclosure.
Recommended mounting
hardware
You will need:
3/32 in. (2.25 mm)
Wood wall
(4) #10 x 11/2 in.
(M5 x 36 mm)
1
Wallboard
/2
in. (12 mm)
(4) #10 x 21/2 in.
(M5 x 75 mm)
(4) #10 (M5)
1
Masonry wall
/4
in. (6 mm)
(4) #10 x 11/2 in.
(M5 x 36 mm)
(4) #10 x 1 in.
(M5 x 25 mm)
6
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Setting Up Your Lifestyle® Stereo Amplifier
®
Connecting the Lifestyle stereo amplifier to a multi-room interface
CAUTION: Before making any connections, turn the Lifestyle® system off and disconnect the music center
from the AC (mains) power outlet. DO NOT plug the amplifier into an outlet until you have completed all other
connections.
1. Insert the single multi-pin connector at one end of the audio input cable into one of the unused ROOM
output jacks (B, C, or D) on the rear of the multi-room interface (Figure 6).
2. At the other end of the audio input cable, insert the 3.5 mm mini-plug into the SYSTEM CONTROL jack
on the rear panel of the amplifier.
3. Insert the white RCA piggyback connector of the supplied cable into the L (left) INPUT jack. Insert the
red RCA piggyback connector into the R (right) INPUT jack of the amplifier.
Lifestyle® stereo amplifier rear panel
Figure 6
Cable connections between
a multi-room interface
and the Lifestyle® stereo
amplifier
4 Ω MINIMUM
L
L
L
R
SYSTEM
CONTROL
R
R
L
R
+
–
SPEAKER OUTPUTS
SPEAKER OUTPUTS
INPUT
Multi-room interface rear panel
30-ft audio input
cable (supplied)
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Setting Up Your Lifestyle® Stereo Amplifier
Operating speakers in other rooms with the Personal® music center
Systems that have a multi-room interface are controlled by the Personal music center which requires no
internal switch settings before it allows you to control more than one room of speakers. However, if you pur-
chase a second Personal music center, you must follow the procedure for setting up the Personal music
center for the first time.
Note: Refer to your Lifestyle® system owner’s guide for more information on operating your system in more
than one room.
The Personal music center allows you to control up to four sets of Bose® powered speakers placed in indi-
vidual rooms. These rooms are referred to as room A, B, C, and D, with room A being the primary room (the
one used for a one-room system). If two or more rooms are connected to your system, the Personal music
center displays ROOM and HOUSE buttons, and room indicators (A, B, C, and/or D). Figure 7 shows an
example display for a two-room system.
Figure 7
Press the ROOM button to control a single room or two or more rooms that share a source
Press the HOUSE button to control all connected rooms as one
Sample display for a two-
room system
The room indicators tell you what was selected
by the ROOM or HOUSE button
8
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Setting Up Your Lifestyle® Stereo Amplifier
®
®
Connecting the Lifestyle stereo amplifier to a Lifestyle media center
CAUTION: Before making connections, turn the Lifestyle® system off and disconnect the media center from
the AC (mains) power outlet. DO NOT plug the amplifier into an outlet until you have completed all other con-
nections.
1. Insert the single-connector end of the audio input cable into the SPEAKER ZONES 2 output jack on the
2. At the other end of the audio input cable, insert the 3.5 mm mini-plug into the SYSTEM CONTROL jack
on the rear panel of the amplifier.
3. Insert the white RCA piggyback connector of the audio input cable into the L (left) INPUT jack. Insert the
red RCA piggyback connector into the R (right) INPUT jack of the amplifier.
Figure 8
Lifestyle® SA-1 stereo amplifier rear panel
Cable connections between
the Lifestyle® media center
and the Lifestyle® stereo
amplifier
Lifestyle® media center rear panel
30-ft audio input
cable (supplied)
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Setting Up Your Lifestyle® Stereo Amplifier
Setting up the remote control
You need to set up a second remote control to operate the ZONE 2 output.
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote.
3. Make sure switches 5, 7, and 8 are up, and switches 6 and 9 are down.
Note: Refer to your Lifestyle® system owner’s guide for more information on operating your system in more
than one room.
Figure 9
ON
Setting up a Zone 2 remote
control
Setting Zone 2 Protocol
For the SA-1 amplifier to work properly with a Lifestyle® media center, you will need to set the Zone 2 Proto-
col to Legacy mode (Figure 9a).
1. While your Lifestyle® DVD system is on, press the Settings button on your remote control. This will open
the on-screen display.
2. Scroll down with the down-arrow button and select System Setup using the enter button.
3. You will now see a menu entitled System Setup (1 of 3). Scroll down to “more...”. Continue to scroll down
through (2 or 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2 Protocol.
4. Use the right-arrow button to change the protocol from Normal to Legacy.
5. Before using Zone 2, shut off the system and turn it on again; this ensures that the Zone 2 Protocol is
reset to Legacy mode.
Figure 9a
Setting Zone 2 Protocol
Settings ( )
System Setup (3 of 3)
O
n
M
ute
Mute
O
ff
All
S
O
U
R
C
E
/
IN
P
U
T
C
D
/D
V
D
Changer
F
M
/A
M
TV
V
C
R
A
U
X
M
E
N
U /
N
A
V
IG
A
T
IO
N
S
e
ttin
g
s
T
Disc
une
Settings
Seek
Enter
C
hannel
hapter
reset
rack
C
P
V
olum
e
T
1
4
7
2
5
8
0
3
6
9
P
LA
Y
B
A
C
K
Stop
Pause
Play
S
h
u
ffle
R
e
p
e
a
t
Enter
System Setup
Zone 2 Protocol: Legacy
10
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Setting Up Your Lifestyle® Stereo Amplifier
®
Connecting the Lifestyle stereo amplifier to a Model 20 music center
CAUTION: Before making connections, turn the Lifestyle® system off and disconnect the music center from
the AC (mains) power outlet. DO NOT plug the amplifier into an outlet until you have completed all other con-
nections.
1. Insert the single multi-pin connector at one end of the audio input cable into the SPEAKER ZONES 2
output jack on the rear panel of the music center (Figure 10).
2. At the other end of the audio input cable, insert the 3.5 mm mini-plug into the SYSTEM CONTROL jack
on the rear panel of the amplifier.
3. Insert the white RCA piggyback connector of the supplied cable into the L (left) INPUT jack. Insert the
red RCA piggyback connector into the R (right) INPUT jack of the amplifier.
Figure 10
Lifestyle® stereo amplifier rear panel
Cable connections between
4 Ω MINIMUM
the Model 20 music center
L
L
and the Lifestyle® stereo
amplifier
R
L
SYSTEM
CONTROL
R
R
L
R
+
–
INPUT
SPEAKER OUTPUTS
Model 20 music center rear panel
30-ft audio input
cable (supplied)
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Setting Up Your Lifestyle® Stereo Amplifier
Setting up the RC-20 remote control for Zone 2
If your system uses a Model 20 music center, you need to set up a second RC-20 remote control to operate
the ZONE 2 outputs.
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote.
3. Slide switch 5 down (off), and switches 6 and 8 up (on).
Note: Refer to your Lifestyle® system owner’s guide for more information on operating your system in more
than one room.
Figure 11
Setting up a Zone 2 remote
control
40
K
ON
l 2 3 4 5 6 7 8
12
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Setting Up Your Lifestyle® Stereo Amplifier
®
Connecting the Lifestyle stereo amplifier to a Model 5 music center
In systems using a Model 5 music center, home theater speakers are connected to the FIXED OUTPUT jacks
on the rear panel of the music center. When adding the Lifestyle® amplifier, you need to temporarily unplug
the theater speakers from the FIXED R and FIXED L OUTPUT jacks.
CAUTION: Before making connections, turn the Lifestyle® system off and disconnect the music center from
the AC (mains) power outlet. DO NOT plug the amplifier into an outlet until you have completed all other con-
nections.
CAUTION: DO NOT connect the audio input cable for the Lifestyle® stereo amplifier to the SPEAKERS A or
SPEAKERS B outputs. The amplifier is designed to work properly with the fixed output level available from
the FIXED OUTPUT jacks.
1. Insert the single multi-pin connector at one end of the audio input cable into the multi-pin INPUT jack on
2. At the other end of the audio input cable, insert the 3.5 mm mini-plug into the SYSTEM CONTROL 2 jack
on the rear panel of the music center.
3. On the rear panel of the music center, disconnect the audio input cables from both FIXED OUTPUT
jacks.
4. Insert the red RCA piggyback connector of the supplied cable into the R (right) FIXED OUTPUT jack.
Insert the white RCA piggyback connector into the L (left) FIXED OUTPUT jack.
5. Insert the red RCA connector of the Acoustimass® module cable into the red piggyback jack and the
white RCA connector into the white piggyback jack.
Lifestyle® stereo amplifier rear panel
Figure 12
Cable connections between
the Model 5 music center
and the Lifestyle® stereo
amplifier
4 Ω MINIMUM
L
L
L
L
SYSTEM
CONTROL
R
R
R
R
+
–
SPEAKER OUTPUTS
SPEAKER OUTPUTS
INPUT
Model 5 music center rear panel
3.5 mm mini-plug
AM LOOP
L
POWER
1
L
12VAC
~
IN
SYSTEM
CONTROL
FX
1.0A
R
R
2
A
B
VIDEO
SOUND
AUX
INPUT
C PLAY
TAE
SPEAKERS
OUTPUT
ANTENNA
SEE INSTRUCTION MANUAL
Fixed speaker outputs
30-ft audio input
cable (supplied)
Acoustimass module
cable
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Setting Up Your Lifestyle® Stereo Amplifier
Setting up the RC-5 remote control
If your system uses a Model 5 music center, you need to set up a second RC-5 remote control to operate
your Lifestyle® stereo amplifier.
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote.
3. Slide switch 5 down (off) and 6 up (on).
Note: Refer to your Lifestyle® system owner’s guide for more information on operating your system in more
than one room.
Figure 13
RC-5 remote switch
settings
40
K
ON
l 2 3 4 5 6 7 8
®
Connecting speakers to your Lifestyle stereo amplifier
CAUTION: DO NOT connect the amplifier to powered speakers of any make or model, nor to any amplified
music sources. Doing so may cause damage to the equipment.
Speaker cable consists of two insulated wires. One wire is usually marked (striped, collared, or ribbed), indi-
cating that it should be connected to the positive (+ or red) terminal. The plain wire should always be con-
nected to the negative (– or black) terminal. For recommended wire sizes and lengths, see “Wire
• Connect the right speaker cable to the SPEAKER OUTPUT R terminals (Figure 14). Press the red terminal
tab. Insert the wire coming from the speaker’s positive (+) terminal into the red jack and release the tab.
Press the black terminal tab. Insert the wire coming from the speaker’s negative (–) terminal into the black
jack and release the tab.
• Connect the left speaker cable to the SPEAKER OUTPUT L terminals in the same way.
Notice which speaker cable is connected to the L (left) output, and which is connected to the R (right) output
on the back of the amplifier. Be sure that the speaker positioned on the left in the listening area (as you face
it) attaches to the cable connected to the L output.
Figure 14
Speaker cable connections
on the amplifier
14
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Setting Up Your Lifestyle® Stereo Amplifier
®
Checking to see if you have a dual voltage Lifestyle amplifier
• Dual voltage units have a voltage selection switch on the rear panel (Figure 15). Check to see if your unit
has this switch.
• This switch is preset at the factory to 230V. If you plan to connect your amplifier to 115V (North America),
slide this switch to the 115V position.
Figure 15
Setting the voltage selec-
tion switch to 115V
Powering-up your system
CAUTION: DO NOT plug the AC power cord into an AC (mains) outlet until all other connections are com-
plete.
1. Using the power cord included with your Lifestyle® stereo amplifier, firmly insert the small connector on
2. Connect the power cord of the Lifestyle® stereo amplifier and your Lifestyle® music system to an AC
(mains) outlet.
3. If you own a 230V version, there is a power switch on the rear panel of the amplifier. Move this switch to
the ON position.
4. Select a music source with your Personal® music center or your new remote control and adjust the vol-
ume to your liking.
Figure 16
Power cord connection on
the amplifier
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
15
®
Maintaining Your Lifestyle Stereo Amplifier
Cleaning the amplifier
The amplifier, which is designed only for indoor use, may become dusty over time. To clean the amplifier, use
only a soft, dry cloth to remove dust from the outside of the enclosure. Do not use any solvents, chemicals,
or cleaning solutions containing alcohol, ammonia, or abrasives. Do not allow liquids to spill into any open-
ings. Do not use any sprays near the amplifier.
Protecting outdoor wiring
Although some Bose® speakers are designed and tested to stand up to outdoor weather conditions, the
bare ends of the speaker wire can be affected by exposure to the elements. This is especially true of salt
water exposure.
You may use a silicone caulking material, such as RTV adhesive, to protect speaker wire connections. It is
commonly available at hardware stores. If you do use caulking, apply it only after the wires are connected
and the knobs tightened down. Check the caulking annually, and re-apply as needed.
Troubleshooting
If you have a problem operating your Lifestyle® system after installing the Lifestyle® stereo amplifier, follow
the guidelines below. For additional help, see the troubleshooting information in your system owner’s guide.
If the problem still exists, contact your Bose dealer to arrange for service, or contact Bose Customer Ser-
vice. Refer to the address list enclosed in the product packaging for correct phone numbers.
Problem
What to do
Neither speaker • Make sure the Lifestyle® music center and the amplifier are plugged in and turned on.
plays
• Make sure the plugs are inserted fully and the outlets are in working order.
• Be sure a music source is selected (AM, FM, CD, AUX, etc.). If CD or AUX is
selected, check to be sure there is a CD in the player or the source connected to
AUX is turned on.
• If using a Model 20 music center, make sure the audio input cable is inserted into
SPEAKER ZONE 2.
• If using a Model 5 music center for home theater (Lifestyle® 12 or Lifestyle® 8 sys-
tems), make sure the amplifier audio input cable is plugged into the FIXED OUTPUTs
on the music center. (Then the speaker output cable to the Acoustimass® module
should be connected to the piggyback jacks on the audio input cable.)
• Disconnect any headphones.
• Make sure the remote control switch settings are correct.
Only one
speaker plays
• Check the wires connected to the speaker that does not play.
• Make sure the wires are in good condition and are firmly connected at both ends.
16
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Maintaining Your Lifestyle® Stereo Amplifier
Problem
What to do
One speaker
still does not
play
• Disconnect the wires from that speaker and the amplifier. Disconnect the other cable
from its speaker, and connect that end of the cable to the speaker that does not play.
If the speaker still does not play, the problem is in the speaker. If the speaker now
plays, continue checking for the source of the problem.
• Disconnect the same cable from the amplifier. Connect it to the other outputs on the
amplifier. If the speaker plays, the problem is in the original cable that was connected
to that speaker. If the speaker does not play, the problem is in that channel of the
amplifier.
Right and left
stereo channels
are heard on the
wrong speak-
ers.
• Check the speaker cable connections to be sure the cable connected to the
SPEAKER OUTPUTS L at the amplifier are connected at the other end to the speaker
on the left in your listening area.
• Check the speaker cable connections to be sure the cable connected to the
SPEAKER OUTPUTS R at the amplifier are connected at the other end to the speaker
on the right in your listening area.
Bass or treble is • Check the speaker wire connections. Make sure the wires are connected + to + and
weak
– to –.
Interference
• Make sure the speaker wires are firmly inserted in the terminals on the back of the
speaker and on the amplifier rear panel. Check to be sure no wires are touching
across terminals.
Remote does
not adjust the
volume
• Be sure the 1/8” mini-plug is firmly inserted in the SYSTEM CONTROL 2 jack.
• If you are using an RC-20 or RC-5 remote control, make sure the remote control
switch settings are correct.
Volume
suddenly
decreases
• Lower the volume setting to see if the level returns to normal. If so, the sudden loss of
volume was an intentional action of the amplifier’s overload protection feature. This
engages automatically if the volume is set too high and is overdriving the speakers.
Choosing a lower setting should ensure continuous, even volume.
Zone 2 does not • If you are using a Lifestyle® DVD system, the stereo amplifier will not work unless
work at all
“Zone 2 Protocol” in the system settings menu is set to “Legacy”. For more informa-
tion, consult your Lifestyle® DVD system’s owners guide.
Customer service
Warranty period
For additional help in solving problems, contact Bose® Customer Service. Refer to the address list enclosed
in the product packaging for correct phone numbers.
The Lifestyle® stereo amplifier is covered by the Bose limited one-year transferable warranty. Details of the
coverage are provided on the warranty card that came with the product. Please fill out the information sec-
tion of the card and mail it to Bose.
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Maintaining Your Lifestyle® Stereo Amplifier
Technical information
Features
• Bose® proprietary digital signal processing technology
• Built-in digital volume control
• Thermal overload protection
• Protective rubber feet
Power rating
USA/Canada: 120V
Dual voltage: 115/230V
International: 220-240V
Input jacks
50/60 Hz, 220W
50/60 Hz, 220W
50/60 Hz, 220W
Dual audio: RCA or 8-pin mini-DIN
System control: 3.5 mm stereo mini-plug connector
Input sensitivity
0.5 Vrms @ 1 kHz
Output power (continuous average)
35W per channel minimum into 4 Ohms, from 30 to 15 kHz, with no more than 0.5% THD.
Signal to Noise ratio (S/N)
90 dB
Dimensions
141/4 in. W x 51/2 in. D x 31/8 in. H
(35.8 cm x 13.7 cm x 7.8 cm)
Weight
6 lb (2.72 kg)
Finish
Black powder coat
Wire recommendations
Gauge
Length (max.)
18 (0.75 mm2)
16 (1.7 mm2)
14 (2.0 mm2)
30 ft (9 m)
45 ft (14 m)
70 ft (21 m)
18
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
AM262840_00_V.pdf
Maintaining Your Lifestyle® Stereo Amplifier
AM262840_00_V.pdf
January 4, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
19
© 2002 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
262840 AM Rev.00 JN20602
Download from Www.Somanuals.com. All Manuals Search And Download.
|